From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-we0-f177.google.com ([74.125.82.177]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1TNYXV-0004Yk-S6 for barebox@lists.infradead.org; Mon, 15 Oct 2012 00:28:15 +0000 Received: by mail-we0-f177.google.com with SMTP id u50so2887448wey.36 for ; Sun, 14 Oct 2012 17:28:12 -0700 (PDT) From: Vicente Bergas Date: Mon, 15 Oct 2012 02:22:40 +0200 Message-Id: <1350260560-15528-7-git-send-email-vicencb@gmail.com> In-Reply-To: <1350260560-15528-1-git-send-email-vicencb@gmail.com> References: <1350260560-15528-1-git-send-email-vicencb@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 6/6] OMAP4: clean voltage switch To: barebox@lists.infradead.org Cc: Vicente Bergas Modified voltage setting to do a clean switch. See: http://lists.denx.de/pipermail/u-boot/2012-March/119149.html Also changed vdd_mpu and VCORE2 to 1.2 volt as in u-boot. Signed-off-by: Vicente Bergas --- arch/arm/boards/archosg9/mux.c | 9 +---- arch/arm/mach-omap/include/mach/omap4-clock.h | 2 +- arch/arm/mach-omap/include/mach/omap4-silicon.h | 2 +- arch/arm/mach-omap/omap4_clock.c | 37 +++++++++++++++++- arch/arm/mach-omap/omap4_generic.c | 52 ++++--------------------- 5 files changed, 46 insertions(+), 56 deletions(-) diff --git a/arch/arm/boards/archosg9/mux.c b/arch/arm/boards/archosg9/mux.c index 7ca5057..c8695c0 100644 --- a/arch/arm/boards/archosg9/mux.c +++ b/arch/arm/boards/archosg9/mux.c @@ -441,7 +441,7 @@ static const struct pad_conf_entry wkup_padconf_array[] = { /* gpio_wk30 */ { FREF_CLK3_REQ , M3 }, /* gpio_wk7 */ /* tps62361_vsel0 */ - { FREF_CLK4_REQ , IEN | PTU | M3 }, + { FREF_CLK4_REQ , M3 }, }; void set_muxconf_regs(void){ @@ -449,11 +449,4 @@ void set_muxconf_regs(void){ core_padconf_array, ARRAY_SIZE(core_padconf_array)); omap4_do_set_mux(OMAP44XX_CONTROL_PADCONF_WKUP, wkup_padconf_array, ARRAY_SIZE(wkup_padconf_array)); - - /* gpio_wk7 is used for controlling TPS on 4460 */ - if (omap4_revision() >= OMAP4460_ES1_0) { - writew(M3, OMAP44XX_CONTROL_PADCONF_WKUP + FREF_CLK4_REQ); - /* Enable GPIO-1 clocks before TPS initialization */ - omap4_enable_gpio1_wup_clocks(); - } } diff --git a/arch/arm/mach-omap/include/mach/omap4-clock.h b/arch/arm/mach-omap/include/mach/omap4-clock.h index e5302d6..8cbc061 100644 --- a/arch/arm/mach-omap/include/mach/omap4-clock.h +++ b/arch/arm/mach-omap/include/mach/omap4-clock.h @@ -335,5 +335,5 @@ void omap4_lock_core_dpll_shadow(const struct dpll_param *param); void omap4_enable_gpio1_wup_clocks(void); void omap4_enable_gpio_clocks(void); void omap4_enable_all_clocks(void); -void omap4_do_scale_tps62361(u32 reg, u32 volt_mv); +void omap4_do_scale_tps62361(int vsel0_pin, u32 reg, u32 volt_mv); diff --git a/arch/arm/mach-omap/include/mach/omap4-silicon.h b/arch/arm/mach-omap/include/mach/omap4-silicon.h index 71ffe39..137cc88 100644 --- a/arch/arm/mach-omap/include/mach/omap4-silicon.h +++ b/arch/arm/mach-omap/include/mach/omap4-silicon.h @@ -196,6 +196,6 @@ struct dpll_param; void omap4_ddr_init(const struct ddr_regs *, const struct dpll_param *); void omap4_power_i2c_send(u32); unsigned int omap4_revision(void); -noinline int omap4_scale_vcores(unsigned vsel0_pin); +noinline int omap4_scale_vcores(int vsel0_pin); #endif diff --git a/arch/arm/mach-omap/omap4_clock.c b/arch/arm/mach-omap/omap4_clock.c index 1481f16..f7927d2 100644 --- a/arch/arm/mach-omap/omap4_clock.c +++ b/arch/arm/mach-omap/omap4_clock.c @@ -394,9 +394,38 @@ void omap4_enable_all_clocks(void) sr32(CM_L3INIT_USBPHY_CLKCTRL, 0, 32, 0x301); } -void omap4_do_scale_tps62361(u32 reg, u32 volt_mv) +#define GPIO_MASK 0x1f +#define GPIO_OE 0x34 +#define GPIO_CLEARDATAOUT 0x90 +#define GPIO_SETDATAOUT 0x94 + +static void __iomem *omap4_get_gpio_base(unsigned gpio) +{ + void __iomem *base; + + if (gpio < 32) + base = (void *)0x4a310100; + else + base = (void *)(0x48053100 + ((gpio & ~GPIO_MASK) << 8)); + + return base; +} + +void omap4_do_scale_tps62361(int vsel0_pin, u32 reg, u32 volt_mv) { u32 temp, step; + void __iomem *base; + u32 val; + + /* Pull the GPIO low to select SET0 register, while we program SET1 */ + if (vsel0_pin >= 0) { + base = omap4_get_gpio_base(vsel0_pin); + val = 1 << (vsel0_pin & GPIO_MASK); + writel(val, base + GPIO_CLEARDATAOUT); + val = readl(base + GPIO_OE); + val &= (1 << (vsel0_pin & GPIO_MASK)); + writel(val, base + GPIO_OE); + } step = volt_mv - TPS62361_BASE_VOLT_MV; step /= 10; @@ -411,4 +440,10 @@ void omap4_do_scale_tps62361(u32 reg, u32 volt_mv) if (!wait_on_value(OMAP44XX_PRM_VC_VAL_BYPASS_VALID_BIT, 0, OMAP44XX_PRM_VC_VAL_BYPASS, LDELAY)) puts("Scaling voltage failed for vdd_mpu from TPS\n"); + + /* Pull the GPIO high to select SET1 register */ + if (vsel0_pin >= 0) { + val = 1 << (vsel0_pin & GPIO_MASK); + writel(val, base + GPIO_SETDATAOUT); + } } diff --git a/arch/arm/mach-omap/omap4_generic.c b/arch/arm/mach-omap/omap4_generic.c index 765fcb5..8e692ba 100644 --- a/arch/arm/mach-omap/omap4_generic.c +++ b/arch/arm/mach-omap/omap4_generic.c @@ -495,27 +495,11 @@ enum omap_boot_src omap4_bootsrc(void) return OMAP_BOOTSRC_UNKNOWN; } -#define GPIO_MASK 0x1f - -static void __iomem *omap4_get_gpio_base(unsigned gpio) -{ - void __iomem *base; - - if (gpio < 32) - base = (void *)0x4a310000; - else - base = (void *)(0x48053000 + ((gpio & ~GPIO_MASK) << 8)); - - return base; -} - #define I2C_SLAVE 0x12 -noinline int omap4_scale_vcores(unsigned vsel0_pin) +noinline int omap4_scale_vcores(int vsel0_pin) { - void __iomem *base; unsigned int rev = omap4_revision(); - u32 val = 0; /* For VC bypass only VCOREx_CGF_FORCE is necessary and * VCOREx_CFG_VOLTAGE changes can be discarded @@ -523,33 +507,6 @@ noinline int omap4_scale_vcores(unsigned vsel0_pin) writel(0, OMAP44XX_PRM_VC_CFG_I2C_MODE); writel(0x6026, OMAP44XX_PRM_VC_CFG_I2C_CLK); - /* TPS - supplies vdd_mpu on 4460 */ - if (rev >= OMAP4460_ES1_0) { - /* - * Setup SET1 and SET0 with right values so that kernel - * can use either of them based on its needs. - */ - omap4_do_scale_tps62361(TPS62361_REG_ADDR_SET0, 1430); - omap4_do_scale_tps62361(TPS62361_REG_ADDR_SET1, 1430); - - /* - * Select SET1 in TPS62361: - * VSEL1 is grounded on board. So the following selects - * VSEL1 = 0 and VSEL0 = 1 - */ - base = omap4_get_gpio_base(vsel0_pin); - - val = 1 << (vsel0_pin & GPIO_MASK); - writel(val, base + 0x190); - - val = readl(base + 0x134); - val &= (1 << (vsel0_pin & GPIO_MASK)); - writel(val, base + 0x134); - - val = 1 << (vsel0_pin & GPIO_MASK); - writel(val, base + 0x194); - } - /* set VCORE1 force VSEL */ /* * 4430 : supplies vdd_mpu @@ -568,8 +525,13 @@ noinline int omap4_scale_vcores(unsigned vsel0_pin) /* 0x55: i2c addr, 28: ~ 1200 mvolts*/ omap4_power_i2c_send((0x2855 << 8) | I2C_SLAVE); + /* TPS - supplies vdd_mpu on 4460 */ + if (rev >= OMAP4460_ES1_0) + omap4_do_scale_tps62361(vsel0_pin, + TPS62361_REG_ADDR_SET1, 1203); + /* FIXME: set VCORE2 force VSEL, Check the reset value */ - omap4_power_i2c_send((0x295B << 8) | I2C_SLAVE); + omap4_power_i2c_send((0x285B << 8) | I2C_SLAVE); /* set VCORE3 force VSEL */ switch (rev) { -- 1.7.12.3 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox