* [PATCH 0/5] BCM2835/Raspberry-Pi support
@ 2012-10-16 18:04 Carlo Caione
2012-10-16 18:04 ` [PATCH 1/5] BCM2835: add clocksource driver Carlo Caione
` (4 more replies)
0 siblings, 5 replies; 18+ messages in thread
From: Carlo Caione @ 2012-10-16 18:04 UTC (permalink / raw)
To: barebox
Hi,
the same set as before but with the correct drivers name for DT
Best regards,
Carlo Caione (5):
BCM2835: add clocksource driver
BCM2835: add gpio driver
ARM1176: add support
BCM2835: add support (arch)
Raspberry-Pi: add support (board)
arch/arm/Kconfig | 9 ++
arch/arm/Makefile | 2 +
arch/arm/boards/raspberry-pi/Makefile | 1 +
arch/arm/boards/raspberry-pi/config.h | 4 +
.../arm/boards/raspberry-pi/env/init/bootargs-base | 8 +
arch/arm/boards/raspberry-pi/env/init/hostname | 8 +
arch/arm/boards/raspberry-pi/rpi.c | 49 ++++++
arch/arm/configs/rpi_defconfig | 40 +++++
arch/arm/cpu/Kconfig | 5 +
arch/arm/mach-bcm2835/Kconfig | 18 +++
arch/arm/mach-bcm2835/Makefile | 2 +
arch/arm/mach-bcm2835/clock.c | 39 +++++
arch/arm/mach-bcm2835/core.c | 105 +++++++++++++
arch/arm/mach-bcm2835/include/mach/clkdev.h | 7 +
arch/arm/mach-bcm2835/include/mach/clock.h | 8 +
arch/arm/mach-bcm2835/include/mach/core.h | 27 ++++
arch/arm/mach-bcm2835/include/mach/gpio.h | 1 +
arch/arm/mach-bcm2835/include/mach/platform.h | 53 +++++++
arch/arm/mach-bcm2835/include/mach/wd.h | 50 +++++++
drivers/clocksource/Kconfig | 4 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/bcm2835.c | 95 ++++++++++++
drivers/gpio/Kconfig | 4 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-bcm2835.c | 165 +++++++++++++++++++++
25 files changed, 706 insertions(+)
create mode 100644 arch/arm/boards/raspberry-pi/Makefile
create mode 100644 arch/arm/boards/raspberry-pi/config.h
create mode 100644 arch/arm/boards/raspberry-pi/env/init/bootargs-base
create mode 100644 arch/arm/boards/raspberry-pi/env/init/hostname
create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
create mode 100644 arch/arm/configs/rpi_defconfig
create mode 100644 arch/arm/mach-bcm2835/Kconfig
create mode 100644 arch/arm/mach-bcm2835/Makefile
create mode 100644 arch/arm/mach-bcm2835/clock.c
create mode 100644 arch/arm/mach-bcm2835/core.c
create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/clock.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/wd.h
create mode 100644 drivers/clocksource/bcm2835.c
create mode 100644 drivers/gpio/gpio-bcm2835.c
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/5] BCM2835: add clocksource driver
2012-10-16 18:04 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
@ 2012-10-16 18:04 ` Carlo Caione
2012-10-16 18:04 ` [PATCH 2/5] BCM2835: add gpio driver Carlo Caione
` (3 subsequent siblings)
4 siblings, 0 replies; 18+ messages in thread
From: Carlo Caione @ 2012-10-16 18:04 UTC (permalink / raw)
To: barebox
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
drivers/clocksource/Kconfig | 4 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/bcm2835.c | 95 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 100 insertions(+)
create mode 100644 drivers/clocksource/bcm2835.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 9d6d293..09acdd7 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -2,6 +2,10 @@ config ARM_SMP_TWD
bool
depends on ARM && CPU_V7
+config CLOCKSOURCE_BCM2835
+ bool
+ depends on ARCH_BCM2835
+
config CLOCKSOURCE_NOMADIK
bool
depends on ARM
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index bef465c..92d7c13 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_ARM_SMP_TWD) += arm_smp_twd.o
+obj-$(CONFIG_CLOCKSOURCE_BCM2835) += bcm2835.o
obj-$(CONFIG_CLOCKSOURCE_NOMADIK) += nomadik.o
diff --git a/drivers/clocksource/bcm2835.c b/drivers/clocksource/bcm2835.c
new file mode 100644
index 0000000..6a67e5c
--- /dev/null
+++ b/drivers/clocksource/bcm2835.c
@@ -0,0 +1,95 @@
+/*
+ * Author: Carlo Caione <carlo@carlocaione.org>
+ *
+ * Based on clocksource for nomadik
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+
+#include <common.h>
+#include <clock.h>
+#include <io.h>
+#include <init.h>
+#include <driver.h>
+#include <errno.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+/* Registers */
+#define ST_CLO 0x04
+
+static __iomem void *stc_base;
+
+static uint64_t stc_read_cycles(void)
+{
+ return readl(stc_base + ST_CLO);
+}
+
+static struct clocksource bcm2835_stc = {
+ .read = stc_read_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+static int bcm2835_cs_probe(struct device_d *dev)
+{
+ static struct clk *stc_clk;
+ u32 rate;
+ int ret;
+
+ stc_clk = clk_get(dev, NULL);
+ if (IS_ERR(stc_clk)) {
+ ret = PTR_ERR(stc_clk);
+ dev_err(dev, "clock not found: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_enable(stc_clk);
+ if (ret) {
+ dev_err(dev, "clock failed to enable: %d\n", ret);
+ clk_put(stc_clk);
+ return ret;
+ }
+
+ rate = clk_get_rate(stc_clk);
+ stc_base = dev_request_mem_region(dev, 0);
+
+ clocks_calc_mult_shift(&bcm2835_stc.mult, &bcm2835_stc.shift, rate, NSEC_PER_SEC, 60);
+ init_clock(&bcm2835_stc);
+
+ return 0;
+}
+
+static __maybe_unused struct of_device_id bcm2835_cs_dt_ids[] = {
+ {
+ .compatible = "brcm,bcm2835-system-timer",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d bcm2835_cs_driver = {
+ .name = "bcm2835-cs",
+ .probe = bcm2835_cs_probe,
+ .of_compatible = DRV_OF_COMPAT(bcm2835_cs_dt_ids),
+};
+
+static int bcm2835_cs_init(void)
+{
+ return platform_driver_register(&bcm2835_cs_driver);
+}
+coredevice_initcall(bcm2835_cs_init);
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 2/5] BCM2835: add gpio driver
2012-10-16 18:04 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
2012-10-16 18:04 ` [PATCH 1/5] BCM2835: add clocksource driver Carlo Caione
@ 2012-10-16 18:04 ` Carlo Caione
2012-10-16 21:09 ` Sascha Hauer
2012-10-16 18:04 ` [PATCH 3/5] ARM1176: add support Carlo Caione
` (2 subsequent siblings)
4 siblings, 1 reply; 18+ messages in thread
From: Carlo Caione @ 2012-10-16 18:04 UTC (permalink / raw)
To: barebox
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
drivers/gpio/Kconfig | 4 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-bcm2835.c | 165 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 170 insertions(+)
create mode 100644 drivers/gpio/gpio-bcm2835.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index a0e9b58..e8eeb6d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -6,6 +6,10 @@ if GPIOLIB
menu "GPIO "
+config GPIO_BCM2835
+ bool "GPIO support for BCM2835"
+ depends on ARCH_BCM2835
+
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
depends on ARM_AMBA
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index e2e97d3..aecdf24 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_GPIOLIB) += gpio.o
+obj-$(CONFIG_GPIO_BCM2835) += gpio-bcm2835.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
diff --git a/drivers/gpio/gpio-bcm2835.c b/drivers/gpio/gpio-bcm2835.c
new file mode 100644
index 0000000..ad0e392
--- /dev/null
+++ b/drivers/gpio/gpio-bcm2835.c
@@ -0,0 +1,165 @@
+/*
+ * Author: Carlo Caione <carlo@carlocaione.org>
+ *
+ * Based on linux/arch/arm/mach-bcm2708/bcm2708_gpio.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <malloc.h>
+#include <io.h>
+#include <gpio.h>
+#include <init.h>
+#include <mach/platform.h>
+
+#define GPIOFSEL(x) (0x00+(x)*4)
+#define GPIOSET(x) (0x1c+(x)*4)
+#define GPIOCLR(x) (0x28+(x)*4)
+#define GPIOLEV(x) (0x34+(x)*4)
+#define GPIOEDS(x) (0x40+(x)*4)
+#define GPIOREN(x) (0x4c+(x)*4)
+#define GPIOFEN(x) (0x58+(x)*4)
+#define GPIOHEN(x) (0x64+(x)*4)
+#define GPIOLEN(x) (0x70+(x)*4)
+#define GPIOAREN(x) (0x7c+(x)*4)
+#define GPIOAFEN(x) (0x88+(x)*4)
+#define GPIOUD(x) (0x94+(x)*4)
+#define GPIOUDCLK(x) (0x98+(x)*4)
+
+enum {
+ GPIO_FSEL_INPUT, GPIO_FSEL_OUTPUT,
+ GPIO_FSEL_ALT5, GPIO_FSEL_ALT_4,
+ GPIO_FSEL_ALT0, GPIO_FSEL_ALT1,
+ GPIO_FSEL_ALT2, GPIO_FSEL_ALT3,
+};
+
+struct bcm2835_gpio_chip {
+ void __iomem *base;
+ struct gpio_chip chip;
+};
+
+static int bcm2835_set_function(struct gpio_chip *chip, unsigned gpio, int function)
+{
+ struct bcm2835_gpio_chip *bcmgpio = container_of(chip, struct bcm2835_gpio_chip, chip);
+ void __iomem *base = bcmgpio->base;
+ unsigned gpiodir;
+ unsigned gpio_bank = gpio / 10;
+ unsigned gpio_field_offset = (gpio - 10 * gpio_bank) * 3;
+
+ gpiodir = readl(base + GPIOFSEL(gpio_bank));
+ gpiodir &= ~(7 << gpio_field_offset);
+ gpiodir |= function << gpio_field_offset;
+ writel(gpiodir, base + GPIOFSEL(gpio_bank));
+ gpiodir = readl(base + GPIOFSEL(gpio_bank));
+
+ return 0;
+}
+
+static void bcm2835_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ struct bcm2835_gpio_chip *bcmgpio = container_of(chip, struct bcm2835_gpio_chip, chip);
+ void __iomem *base = bcmgpio->base;
+ unsigned gpio_bank = gpio / 32;
+ unsigned gpio_field_offset = gpio % 32;
+
+ if (value)
+ writel(1 << gpio_field_offset, base + GPIOSET(gpio_bank));
+ else
+ writel(1 << gpio_field_offset, base + GPIOCLR(gpio_bank));
+}
+
+static int bcm2835_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ struct bcm2835_gpio_chip *bcmgpio = container_of(chip, struct bcm2835_gpio_chip, chip);
+ void __iomem *base = bcmgpio->base;
+ unsigned gpio_bank = gpio / 32;
+ unsigned gpio_field_offset = gpio % 32;
+ unsigned lev;
+
+ lev = readl(base + GPIOLEV(gpio_bank));
+ return 0x1 & (lev >> gpio_field_offset);
+}
+
+static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ return bcm2835_set_function(chip, gpio, GPIO_FSEL_INPUT);
+}
+
+static int bcm2835_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ bcm2835_set_function(chip, gpio, GPIO_FSEL_OUTPUT);
+ bcm2835_gpio_set_value(chip, gpio, value);
+
+ return 0;
+}
+
+static struct gpio_ops bcm2835_gpio_ops = {
+ .direction_input = bcm2835_gpio_direction_input,
+ .direction_output = bcm2835_gpio_direction_output,
+ .get = bcm2835_gpio_get_value,
+ .set = bcm2835_gpio_set_value,
+};
+
+static int bcm2835_gpio_probe(struct device_d *dev)
+{
+ struct bcm2835_gpio_chip *bcmgpio;
+ int ret;
+
+ bcmgpio = xzalloc(sizeof(*bcmgpio));
+ bcmgpio->base = dev_request_mem_region(dev, 0);
+ bcmgpio->chip.ops = &bcm2835_gpio_ops;
+ bcmgpio->chip.base = -1;
+ bcmgpio->chip.ngpio = 54;
+ bcmgpio->chip.dev = dev;
+
+ ret = gpiochip_add(&bcmgpio->chip);
+ if (ret) {
+ dev_err(dev, "couldn't add gpiochip, ret = %d\n", ret);
+ goto err;
+ }
+ dev_info(dev, "probed gpiochip%d with base %d\n", dev->id, bcmgpio->chip.base);
+
+ return 0;
+
+err:
+ kfree(bcmgpio);
+
+ return ret;
+}
+
+static __maybe_unused struct of_device_id bcm2835_gpio_dt_ids[] = {
+ {
+ .compatible = "brcm,bcm2835-gpio",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d bcm2835_gpio_driver = {
+ .name = "bcm2835-gpio",
+ .probe = bcm2835_gpio_probe,
+ .of_compatible = DRV_OF_COMPAT(bcm2835_gpio_dt_ids),
+};
+
+static int bcm2835_gpio_add(void)
+{
+ platform_driver_register(&bcm2835_gpio_driver);
+ return 0;
+}
+coredevice_initcall(bcm2835_gpio_add);
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 3/5] ARM1176: add support
2012-10-16 18:04 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
2012-10-16 18:04 ` [PATCH 1/5] BCM2835: add clocksource driver Carlo Caione
2012-10-16 18:04 ` [PATCH 2/5] BCM2835: add gpio driver Carlo Caione
@ 2012-10-16 18:04 ` Carlo Caione
2012-10-16 18:04 ` [PATCH 4/5] BCM2835: add support (arch) Carlo Caione
2012-10-16 18:04 ` [PATCH 5/5] Raspberry-Pi: add support (board) Carlo Caione
4 siblings, 0 replies; 18+ messages in thread
From: Carlo Caione @ 2012-10-16 18:04 UTC (permalink / raw)
To: barebox
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
arch/arm/cpu/Kconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig
index 2ed6789..d8a5fb1 100644
--- a/arch/arm/cpu/Kconfig
+++ b/arch/arm/cpu/Kconfig
@@ -8,6 +8,11 @@ config CPU_32
# which CPUs we support in the kernel image, and the compiler instruction
# optimiser behaviour.
+# ARM1176
+config CPU_ARM1176
+ bool
+ select CPU_V6
+
# ARM920T
config CPU_ARM920T
bool
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 4/5] BCM2835: add support (arch)
2012-10-16 18:04 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
` (2 preceding siblings ...)
2012-10-16 18:04 ` [PATCH 3/5] ARM1176: add support Carlo Caione
@ 2012-10-16 18:04 ` Carlo Caione
2012-10-16 21:24 ` Sascha Hauer
2012-10-16 18:04 ` [PATCH 5/5] Raspberry-Pi: add support (board) Carlo Caione
4 siblings, 1 reply; 18+ messages in thread
From: Carlo Caione @ 2012-10-16 18:04 UTC (permalink / raw)
To: barebox
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
arch/arm/Kconfig | 9 +++
arch/arm/Makefile | 1 +
arch/arm/mach-bcm2835/Kconfig | 3 +
arch/arm/mach-bcm2835/Makefile | 2 +
arch/arm/mach-bcm2835/clock.c | 39 ++++++++++
arch/arm/mach-bcm2835/core.c | 105 ++++++++++++++++++++++++++
arch/arm/mach-bcm2835/include/mach/clkdev.h | 7 ++
arch/arm/mach-bcm2835/include/mach/clock.h | 8 ++
arch/arm/mach-bcm2835/include/mach/core.h | 27 +++++++
arch/arm/mach-bcm2835/include/mach/gpio.h | 1 +
arch/arm/mach-bcm2835/include/mach/platform.h | 53 +++++++++++++
arch/arm/mach-bcm2835/include/mach/wd.h | 50 ++++++++++++
12 files changed, 305 insertions(+)
create mode 100644 arch/arm/mach-bcm2835/Kconfig
create mode 100644 arch/arm/mach-bcm2835/Makefile
create mode 100644 arch/arm/mach-bcm2835/clock.c
create mode 100644 arch/arm/mach-bcm2835/core.c
create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/clock.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/wd.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ffeb4bf..de78b65 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -31,6 +31,14 @@ config ARCH_AT91
select HAS_DEBUG_LL
select HAVE_MACH_ARM_HEAD
+config ARCH_BCM2835
+ bool "Broadcom BCM2835 boards"
+ select GPIOLIB
+ select CPU_ARM1176
+ select CLKDEV_LOOKUP
+ select CLOCKSOURCE_BCM2835
+ select ARM_AMBA
+
config ARCH_EP93XX
bool "Cirrus Logic EP93xx"
select CPU_ARM920T
@@ -102,6 +110,7 @@ endchoice
source arch/arm/cpu/Kconfig
source arch/arm/mach-at91/Kconfig
+source arch/arm/mach-bcm2835/Kconfig
source arch/arm/mach-ep93xx/Kconfig
source arch/arm/mach-imx/Kconfig
source arch/arm/mach-mxs/Kconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index de570d7..3449fd7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -52,6 +52,7 @@ AFLAGS += -include asm/unified.h -msoft-float $(AFLAGS_THUMB2)
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) := at91
+machine-$(CONFIG_ARCH_BCM2835) := bcm2835
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_MXS) := mxs
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
new file mode 100644
index 0000000..c42fe1c
--- /dev/null
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -0,0 +1,3 @@
+if ARCH_BCM2835
+
+endif
diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile
new file mode 100644
index 0000000..f0aa2e0
--- /dev/null
+++ b/arch/arm/mach-bcm2835/Makefile
@@ -0,0 +1,2 @@
+obj-y += core.o
+obj-y += clock.o
\ No newline at end of file
diff --git a/arch/arm/mach-bcm2835/clock.c b/arch/arm/mach-bcm2835/clock.c
new file mode 100644
index 0000000..31400ea
--- /dev/null
+++ b/arch/arm/mach-bcm2835/clock.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2009 Alessandro Rubini
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <mach/clock.h>
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return -EIO;
+}
+EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-bcm2835/core.c b/arch/arm/mach-bcm2835/core.c
new file mode 100644
index 0000000..4c1bf28
--- /dev/null
+++ b/arch/arm/mach-bcm2835/core.c
@@ -0,0 +1,105 @@
+/*
+ * Author: Carlo Caione <carlo@carlocaione.org>
+ *
+ * Based on mach-nomadik
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <io.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/armlinux.h>
+#include <sizes.h>
+
+#include <mach/platform.h>
+#include <mach/wd.h>
+#include <mach/core.h>
+#include <mach/clock.h>
+#include <linux/amba/bus.h>
+
+static struct clk ref_3_clk = {
+ .rate = 3 * 1000 * 1000,
+};
+
+static struct clk ref_1_clk = {
+ .rate = 1 * 1000 * 1000,
+};
+
+static struct clk bcm2835_dummy;
+
+void bcm2835_add_device_sdram(u32 size)
+{
+ if (!size)
+ size = get_ram_size((ulong *) BCM2835_SDRAM_BASE, SZ_128M);
+
+ arm_add_mem_device("ram0", BCM2835_SDRAM_BASE, size);
+}
+
+static struct clk_lookup clocks_lookups[] = {
+ CLKDEV_CON_ID("apb_pclk", &bcm2835_dummy),
+ CLKDEV_DEV_ID("bcm2835-cs", &ref_1_clk),
+ CLKDEV_DEV_ID("uart0-pl0110", &ref_3_clk),
+};
+
+static int bcm2835_gpio_init(void)
+{
+ add_generic_device("bcm2835-gpio", 0, NULL, BCM2835_GPIO_BASE, 0xB0, IORESOURCE_MEM, NULL);
+ return 0;
+}
+coredevice_initcall(bcm2835_gpio_init);
+
+static int bcm2835_clkdev_init(void)
+{
+ clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups));
+ return 0;
+}
+postcore_initcall(bcm2835_clkdev_init);
+
+static int bcm2835_clocksource_init(void)
+{
+ add_generic_device("bcm2835-cs", DEVICE_ID_SINGLE, NULL, BCM2835_ST_BASE, 0x1C, IORESOURCE_MEM, NULL);
+ return 0;
+}
+coredevice_initcall(bcm2835_clocksource_init);
+
+void bcm2835_register_uart(void)
+{
+ amba_apb_device_add(NULL, "uart0-pl011", 0, BCM2835_UART0_BASE, 4096, NULL, 0);
+}
+
+#define RESET_TIMEOUT 10
+
+void __noreturn reset_cpu (unsigned long addr)
+{
+ uint32_t rstc;
+
+ rstc = readl(PM_RSTC);
+ rstc &= ~PM_RSTC_WRCFG_SET;
+ rstc |= PM_RSTC_WRCFG_FULL_RESET;
+ writel(PM_PASSWORD | RESET_TIMEOUT, PM_WDOG);
+ writel(PM_PASSWORD | rstc, PM_RSTC);
+}
+EXPORT_SYMBOL(reset_cpu);
diff --git a/arch/arm/mach-bcm2835/include/mach/clkdev.h b/arch/arm/mach-bcm2835/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/clock.h b/arch/arm/mach-bcm2835/include/mach/clock.h
new file mode 100644
index 0000000..0550bf1
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/clock.h
@@ -0,0 +1,8 @@
+#ifndef _BCM2835_CLOCK_H
+#define _BCM2835_CLOCK_H
+
+struct clk {
+ unsigned long rate;
+};
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/core.h b/arch/arm/mach-bcm2835/include/mach/core.h
new file mode 100644
index 0000000..e60d947
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/core.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __BCM2835_CORE_H__
+#define __BCM2835_CORE_H__
+
+void bcm2835_register_uart(void);
+void bcm2835_add_device_sdram(u32 size);
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/gpio.h b/arch/arm/mach-bcm2835/include/mach/gpio.h
new file mode 100644
index 0000000..306ab4c
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/gpio.h
@@ -0,0 +1 @@
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-bcm2835/include/mach/platform.h b/arch/arm/mach-bcm2835/include/mach/platform.h
new file mode 100644
index 0000000..a058ec5
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/platform.h
@@ -0,0 +1,53 @@
+/*
+ * Extract from arch/arm/mach-bcm2708/include/mach/platform.h
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _BCM2835_PLATFORM_H
+#define _BCM2835_PLATFORM_H
+
+/*
+ * SDRAM
+ */
+#define BCM2835_SDRAM_BASE 0x00000000
+
+/*
+ * Definitions and addresses for the ARM CONTROL logic
+ * This file is manually generated.
+ */
+
+#define BCM2835_PERI_BASE 0x20000000
+#define BCM2835_ST_BASE (BCM2835_PERI_BASE + 0x3000) /* System Timer */
+#define BCM2835_DMA_BASE (BCM2835_PERI_BASE + 0x7000) /* DMA controller */
+#define BCM2835_ARM_BASE (BCM2835_PERI_BASE + 0xB000) /* BCM2708 ARM control block */
+#define BCM2835_PM_BASE (BCM2835_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */
+#define BCM2835_GPIO_BASE (BCM2835_PERI_BASE + 0x200000) /* GPIO */
+#define BCM2835_UART0_BASE (BCM2835_PERI_BASE + 0x201000) /* Uart 0 */
+#define BCM2835_MMCI0_BASE (BCM2835_PERI_BASE + 0x202000) /* MMC interface */
+#define BCM2835_SPI0_BASE (BCM2835_PERI_BASE + 0x204000) /* SPI0 */
+#define BCM2835_BSC0_BASE (BCM2835_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
+#define BCM2835_UART1_BASE (BCM2835_PERI_BASE + 0x215000) /* Uart 1 */
+#define BCM2835_EMMC_BASE (BCM2835_PERI_BASE + 0x300000) /* eMMC interface */
+#define BCM2835_SMI_BASE (BCM2835_PERI_BASE + 0x600000) /* SMI */
+#define BCM2835_BSC1_BASE (BCM2835_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */
+#define BCM2835_USB_BASE (BCM2835_PERI_BASE + 0x980000) /* DTC_OTG USB controller */
+#define BCM2835_MCORE_BASE (BCM2835_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/
+
+#endif
+
+/* END */
diff --git a/arch/arm/mach-bcm2835/include/mach/wd.h b/arch/arm/mach-bcm2835/include/mach/wd.h
new file mode 100644
index 0000000..8046734
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/wd.h
@@ -0,0 +1,50 @@
+/*
+ * Extract from arch/arm/mach-bcm2708/include/mach/platform.h
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _WD_H
+#define _WD_H
+
+/*
+ * Watchdog
+ */
+#define PM_RSTC (BCM2835_PM_BASE+0x1c)
+#define PM_RSTS (BCM2835_PM_BASE+0x20)
+#define PM_WDOG (BCM2835_PM_BASE+0x24)
+
+#define PM_WDOG_RESET 0000000000
+#define PM_PASSWORD 0x5a000000
+#define PM_WDOG_TIME_SET 0x000fffff
+#define PM_RSTC_WRCFG_CLR 0xffffffcf
+#define PM_RSTC_WRCFG_SET 0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
+#define PM_RSTC_RESET 0x00000102
+
+#define PM_RSTS_HADPOR_SET 0x00001000
+#define PM_RSTS_HADSRH_SET 0x00000400
+#define PM_RSTS_HADSRF_SET 0x00000200
+#define PM_RSTS_HADSRQ_SET 0x00000100
+#define PM_RSTS_HADWRH_SET 0x00000040
+#define PM_RSTS_HADWRF_SET 0x00000020
+#define PM_RSTS_HADWRQ_SET 0x00000010
+#define PM_RSTS_HADDRH_SET 0x00000004
+#define PM_RSTS_HADDRF_SET 0x00000002
+#define PM_RSTS_HADDRQ_SET 0x00000001
+
+#endif
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 5/5] Raspberry-Pi: add support (board)
2012-10-16 18:04 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
` (3 preceding siblings ...)
2012-10-16 18:04 ` [PATCH 4/5] BCM2835: add support (arch) Carlo Caione
@ 2012-10-16 18:04 ` Carlo Caione
4 siblings, 0 replies; 18+ messages in thread
From: Carlo Caione @ 2012-10-16 18:04 UTC (permalink / raw)
To: barebox
Tested-By: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
arch/arm/Makefile | 1 +
arch/arm/boards/raspberry-pi/Makefile | 1 +
arch/arm/boards/raspberry-pi/config.h | 4 ++
.../arm/boards/raspberry-pi/env/init/bootargs-base | 8 ++++
arch/arm/boards/raspberry-pi/env/init/hostname | 8 ++++
arch/arm/boards/raspberry-pi/rpi.c | 49 ++++++++++++++++++++++
arch/arm/configs/rpi_defconfig | 40 ++++++++++++++++++
arch/arm/mach-bcm2835/Kconfig | 15 +++++++
8 files changed, 126 insertions(+)
create mode 100644 arch/arm/boards/raspberry-pi/Makefile
create mode 100644 arch/arm/boards/raspberry-pi/config.h
create mode 100644 arch/arm/boards/raspberry-pi/env/init/bootargs-base
create mode 100644 arch/arm/boards/raspberry-pi/env/init/hostname
create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
create mode 100644 arch/arm/configs/rpi_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 3449fd7..ec9898c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -114,6 +114,7 @@ board-$(CONFIG_MACH_PCM043) := pcm043
board-$(CONFIG_MACH_PM9261) := pm9261
board-$(CONFIG_MACH_PM9263) := pm9263
board-$(CONFIG_MACH_PM9G45) := pm9g45
+board-$(CONFIG_MACH_RPI) := raspberry-pi
board-$(CONFIG_MACH_SCB9328) := scb9328
board-$(CONFIG_MACH_NESO) := guf-neso
board-$(CONFIG_MACH_MX23EVK) := freescale-mx23-evk
diff --git a/arch/arm/boards/raspberry-pi/Makefile b/arch/arm/boards/raspberry-pi/Makefile
new file mode 100644
index 0000000..6ce5ede
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MACH_RPI) += rpi.o
diff --git a/arch/arm/boards/raspberry-pi/config.h b/arch/arm/boards/raspberry-pi/config.h
new file mode 100644
index 0000000..ca15136
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/config.h
@@ -0,0 +1,4 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/raspberry-pi/env/init/bootargs-base b/arch/arm/boards/raspberry-pi/env/init/bootargs-base
new file mode 100644
index 0000000..d869754
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/env/init/bootargs-base
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "Base bootargs"
+ exit
+fi
+
+global.linux.bootargs.base="console=ttymxc0,115200"
diff --git a/arch/arm/boards/raspberry-pi/env/init/hostname b/arch/arm/boards/raspberry-pi/env/init/hostname
new file mode 100644
index 0000000..7e8f294
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/env/init/hostname
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "hostname"
+ exit
+fi
+
+global.hostname=Raspberry-Pi
diff --git a/arch/arm/boards/raspberry-pi/rpi.c b/arch/arm/boards/raspberry-pi/rpi.c
new file mode 100644
index 0000000..6c94dcd
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/rpi.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+
+#include <mach/core.h>
+
+static int rpi_mem_init(void)
+{
+ bcm2835_add_device_sdram(0);
+ return 0;
+}
+mem_initcall(rpi_mem_init);
+
+static int rpi_console_init(void)
+{
+ bcm2835_register_uart();
+ return 0;
+}
+console_initcall(rpi_console_init);
+
+static int rpi_devices_init(void)
+{
+ armlinux_set_architecture(MACH_TYPE_BCM2708);
+ armlinux_set_bootparams((void *)(0x00000100));
+ return 0;
+}
+
+device_initcall(rpi_devices_init);
diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
new file mode 100644
index 0000000..bca3d25
--- /dev/null
+++ b/arch/arm/configs/rpi_defconfig
@@ -0,0 +1,40 @@
+CONFIG_ARCH_BCM2835=y
+CONFIG_GPIO_BCM2835=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_PROMPT="R-Pi> "
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_GPIO=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
index c42fe1c..9d97aea 100644
--- a/arch/arm/mach-bcm2835/Kconfig
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -1,3 +1,18 @@
if ARCH_BCM2835
+config ARCH_TEXT_BASE
+ hex
+ default 0x04000000 if MACH_RPI
+
+config BOARDINFO
+ default "RaspberryPi (BCM2835/ARM1176JZF-S)" if MACH_RPI
+
+choice
+ prompt "Broadcom Board type"
+
+config MACH_RPI
+ bool "RaspberryPi (BCM2835/ARM1176JZF-S)"
+
+endchoice
+
endif
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 2/5] BCM2835: add gpio driver
2012-10-16 18:04 ` [PATCH 2/5] BCM2835: add gpio driver Carlo Caione
@ 2012-10-16 21:09 ` Sascha Hauer
0 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2012-10-16 21:09 UTC (permalink / raw)
To: Carlo Caione; +Cc: barebox
Hi Carlo,
I had an additional look before applying it, but there are still
some things that deserve a cleanup.
On Tue, Oct 16, 2012 at 08:04:42PM +0200, Carlo Caione wrote:
> +#include <common.h>
> +#include <errno.h>
> +#include <malloc.h>
> +#include <io.h>
> +#include <gpio.h>
> +#include <init.h>
> +#include <mach/platform.h>
Is this needed? I think not as this file only defines some base
addresses.
> +static int bcm2835_gpio_probe(struct device_d *dev)
> +{
> + struct bcm2835_gpio_chip *bcmgpio;
> + int ret;
> +
> + bcmgpio = xzalloc(sizeof(*bcmgpio));
> + bcmgpio->base = dev_request_mem_region(dev, 0);
> + bcmgpio->chip.ops = &bcm2835_gpio_ops;
> + bcmgpio->chip.base = -1;
Better to use 0 for base of the SoC internal gpios (or something like
dev->id * 32) to get a known base for the gpios. Board code will likely
depend on fixed numbers.
> +
> +static __maybe_unused struct of_device_id bcm2835_gpio_dt_ids[] = {
> + {
> + .compatible = "brcm,bcm2835-gpio",
Too many whitespaces here.
Sascha
> +static int bcm2835_gpio_add(void)
> +{
> + platform_driver_register(&bcm2835_gpio_driver);
> + return 0;
return platform_device_register() please. We had a time when barebox
just paniced when an initcall failed, hence we never returned
unsuccesful. Now we just print an error message, so when the register
for some reason fails you will see it.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 4/5] BCM2835: add support (arch)
2012-10-16 18:04 ` [PATCH 4/5] BCM2835: add support (arch) Carlo Caione
@ 2012-10-16 21:24 ` Sascha Hauer
2012-10-17 6:51 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-17 22:27 ` Carlo Caione
0 siblings, 2 replies; 18+ messages in thread
From: Sascha Hauer @ 2012-10-16 21:24 UTC (permalink / raw)
To: Carlo Caione; +Cc: barebox
On Tue, Oct 16, 2012 at 08:04:44PM +0200, Carlo Caione wrote:
> +
> +static struct clk ref_3_clk = {
> + .rate = 3 * 1000 * 1000,
> +};
> +
> +static struct clk ref_1_clk = {
> + .rate = 1 * 1000 * 1000,
> +};
Add a 'select COMMON_CLK' to your Kconfig and do a:
clk_dummy = clk_fixed("dummy", 0);
clk_ref_3 = clk_fixed("ref3", 3 * 1000 * 1000);
clk_ref_1 = clk_fixed("ref1", 1 * 1000 * 1000);
Then you can drop your clk code and get a clk_dump command
which you can use to see what clocks you have.
> +static int bcm2835_gpio_init(void)
> +{
> + add_generic_device("bcm2835-gpio", 0, NULL, BCM2835_GPIO_BASE, 0xB0, IORESOURCE_MEM, NULL);
> + return 0;
> +}
> +coredevice_initcall(bcm2835_gpio_init);
> +
> +static int bcm2835_clkdev_init(void)
> +{
> + clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups));
> + return 0;
> +}
> +postcore_initcall(bcm2835_clkdev_init);
> +
> +static int bcm2835_clocksource_init(void)
> +{
> + add_generic_device("bcm2835-cs", DEVICE_ID_SINGLE, NULL, BCM2835_ST_BASE, 0x1C, IORESOURCE_MEM, NULL);
> + return 0;
> +}
> +coredevice_initcall(bcm2835_clocksource_init);
> +
Please consolidate the initcalls. A single function for the three above
is enough.
> +void bcm2835_register_uart(void)
Please add the UART index to the function name.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
The address is wrong. Please remove this paragraph completly
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 4/5] BCM2835: add support (arch)
2012-10-16 21:24 ` Sascha Hauer
@ 2012-10-17 6:51 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-17 7:01 ` Sascha Hauer
2012-10-17 22:27 ` Carlo Caione
1 sibling, 1 reply; 18+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-17 6:51 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On 23:24 Tue 16 Oct , Sascha Hauer wrote:
> On Tue, Oct 16, 2012 at 08:04:44PM +0200, Carlo Caione wrote:
> > +
> > +static struct clk ref_3_clk = {
> > + .rate = 3 * 1000 * 1000,
> > +};
> > +
> > +static struct clk ref_1_clk = {
> > + .rate = 1 * 1000 * 1000,
> > +};
>
> Add a 'select COMMON_CLK' to your Kconfig and do a:
>
> clk_dummy = clk_fixed("dummy", 0);
> clk_ref_3 = clk_fixed("ref3", 3 * 1000 * 1000);
> clk_ref_1 = clk_fixed("ref1", 1 * 1000 * 1000);
>
> Then you can drop your clk code and get a clk_dump command
> which you can use to see what clocks you have.
>
> > +static int bcm2835_gpio_init(void)
> > +{
> > + add_generic_device("bcm2835-gpio", 0, NULL, BCM2835_GPIO_BASE, 0xB0, IORESOURCE_MEM, NULL);
> > + return 0;
> > +}
> > +coredevice_initcall(bcm2835_gpio_init);
> > +
> > +static int bcm2835_clkdev_init(void)
> > +{
> > + clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups));
> > + return 0;
> > +}
> > +postcore_initcall(bcm2835_clkdev_init);
> > +
> > +static int bcm2835_clocksource_init(void)
> > +{
> > + add_generic_device("bcm2835-cs", DEVICE_ID_SINGLE, NULL, BCM2835_ST_BASE, 0x1C, IORESOURCE_MEM, NULL);
> > + return 0;
> > +}
> > +coredevice_initcall(bcm2835_clocksource_init);
> > +
>
> Please consolidate the initcalls. A single function for the three above
> is enough.
>
> > +void bcm2835_register_uart(void)
>
> Please add the UART index to the function name.
as we discuss no need the uart1 use the same pin as uart0 and is a wired mini
uart
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 4/5] BCM2835: add support (arch)
2012-10-17 6:51 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2012-10-17 7:01 ` Sascha Hauer
2012-10-17 7:25 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 18+ messages in thread
From: Sascha Hauer @ 2012-10-17 7:01 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox
On Wed, Oct 17, 2012 at 08:51:35AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 23:24 Tue 16 Oct , Sascha Hauer wrote:
> > On Tue, Oct 16, 2012 at 08:04:44PM +0200, Carlo Caione wrote:
> > > +
> > > +static struct clk ref_3_clk = {
> > > + .rate = 3 * 1000 * 1000,
> > > +};
> > > +
> > > +static struct clk ref_1_clk = {
> > > + .rate = 1 * 1000 * 1000,
> > > +};
> >
> > Add a 'select COMMON_CLK' to your Kconfig and do a:
> >
> > clk_dummy = clk_fixed("dummy", 0);
> > clk_ref_3 = clk_fixed("ref3", 3 * 1000 * 1000);
> > clk_ref_1 = clk_fixed("ref1", 1 * 1000 * 1000);
> >
> > Then you can drop your clk code and get a clk_dump command
> > which you can use to see what clocks you have.
> >
> > > +static int bcm2835_gpio_init(void)
> > > +{
> > > + add_generic_device("bcm2835-gpio", 0, NULL, BCM2835_GPIO_BASE, 0xB0, IORESOURCE_MEM, NULL);
> > > + return 0;
> > > +}
> > > +coredevice_initcall(bcm2835_gpio_init);
> > > +
> > > +static int bcm2835_clkdev_init(void)
> > > +{
> > > + clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups));
> > > + return 0;
> > > +}
> > > +postcore_initcall(bcm2835_clkdev_init);
> > > +
> > > +static int bcm2835_clocksource_init(void)
> > > +{
> > > + add_generic_device("bcm2835-cs", DEVICE_ID_SINGLE, NULL, BCM2835_ST_BASE, 0x1C, IORESOURCE_MEM, NULL);
> > > + return 0;
> > > +}
> > > +coredevice_initcall(bcm2835_clocksource_init);
> > > +
> >
> > Please consolidate the initcalls. A single function for the three above
> > is enough.
> >
> > > +void bcm2835_register_uart(void)
> >
> > Please add the UART index to the function name.
> as we discuss no need the uart1 use the same pin as uart0 and is a wired mini
> uart
But it has a different register base. How do I decide which one I use?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 4/5] BCM2835: add support (arch)
2012-10-17 7:01 ` Sascha Hauer
@ 2012-10-17 7:25 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-17 8:31 ` Carlo Caione
0 siblings, 1 reply; 18+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-17 7:25 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On 09:01 Wed 17 Oct , Sascha Hauer wrote:
> On Wed, Oct 17, 2012 at 08:51:35AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 23:24 Tue 16 Oct , Sascha Hauer wrote:
> > > On Tue, Oct 16, 2012 at 08:04:44PM +0200, Carlo Caione wrote:
> > > > +
> > > > +static struct clk ref_3_clk = {
> > > > + .rate = 3 * 1000 * 1000,
> > > > +};
> > > > +
> > > > +static struct clk ref_1_clk = {
> > > > + .rate = 1 * 1000 * 1000,
> > > > +};
> > >
> > > Add a 'select COMMON_CLK' to your Kconfig and do a:
> > >
> > > clk_dummy = clk_fixed("dummy", 0);
> > > clk_ref_3 = clk_fixed("ref3", 3 * 1000 * 1000);
> > > clk_ref_1 = clk_fixed("ref1", 1 * 1000 * 1000);
> > >
> > > Then you can drop your clk code and get a clk_dump command
> > > which you can use to see what clocks you have.
> > >
> > > > +static int bcm2835_gpio_init(void)
> > > > +{
> > > > + add_generic_device("bcm2835-gpio", 0, NULL, BCM2835_GPIO_BASE, 0xB0, IORESOURCE_MEM, NULL);
> > > > + return 0;
> > > > +}
> > > > +coredevice_initcall(bcm2835_gpio_init);
> > > > +
> > > > +static int bcm2835_clkdev_init(void)
> > > > +{
> > > > + clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups));
> > > > + return 0;
> > > > +}
> > > > +postcore_initcall(bcm2835_clkdev_init);
> > > > +
> > > > +static int bcm2835_clocksource_init(void)
> > > > +{
> > > > + add_generic_device("bcm2835-cs", DEVICE_ID_SINGLE, NULL, BCM2835_ST_BASE, 0x1C, IORESOURCE_MEM, NULL);
> > > > + return 0;
> > > > +}
> > > > +coredevice_initcall(bcm2835_clocksource_init);
> > > > +
> > >
> > > Please consolidate the initcalls. A single function for the three above
> > > is enough.
> > >
> > > > +void bcm2835_register_uart(void)
> > >
> > > Please add the UART index to the function name.
> > as we discuss no need the uart1 use the same pin as uart0 and is a wired mini
> > uart
>
> But it has a different register base. How do I decide which one I use?
why use a different at the end it the same pin
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 4/5] BCM2835: add support (arch)
2012-10-17 7:25 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2012-10-17 8:31 ` Carlo Caione
2012-10-17 21:00 ` Sascha Hauer
0 siblings, 1 reply; 18+ messages in thread
From: Carlo Caione @ 2012-10-17 8:31 UTC (permalink / raw)
To: barebox
On Wed, Oct 17, 2012 at 9:25 AM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@jcrosoft.com> wrote:
[cut]
> why use a different at the end it the same pin
I agree with Jean-Christophe, pins are the same so I don't see why one
would use the mini-uart.
Best regards,
--
Carlo Caione
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 4/5] BCM2835: add support (arch)
2012-10-17 8:31 ` Carlo Caione
@ 2012-10-17 21:00 ` Sascha Hauer
0 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2012-10-17 21:00 UTC (permalink / raw)
To: Carlo Caione; +Cc: barebox
On Wed, Oct 17, 2012 at 10:31:12AM +0200, Carlo Caione wrote:
> On Wed, Oct 17, 2012 at 9:25 AM, Jean-Christophe PLAGNIOL-VILLARD
> <plagnioj@jcrosoft.com> wrote:
> [cut]
> > why use a different at the end it the same pin
>
> I agree with Jean-Christophe, pins are the same so I don't see why one
> would use the mini-uart.
Ok. SoC designers sometimes do strange things.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 4/5] BCM2835: add support (arch)
2012-10-16 21:24 ` Sascha Hauer
2012-10-17 6:51 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2012-10-17 22:27 ` Carlo Caione
2012-10-18 7:02 ` Sascha Hauer
1 sibling, 1 reply; 18+ messages in thread
From: Carlo Caione @ 2012-10-17 22:27 UTC (permalink / raw)
To: barebox
On Oct 16, 2012, at 11:24 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Tue, Oct 16, 2012 at 08:04:44PM +0200, Carlo Caione wrote:
>> +
>> +static struct clk ref_3_clk = {
>> + .rate = 3 * 1000 * 1000,
>> +};
>> +
>> +static struct clk ref_1_clk = {
>> + .rate = 1 * 1000 * 1000,
>> +};
>
> Add a 'select COMMON_CLK' to your Kconfig and do a:
>
> clk_dummy = clk_fixed("dummy", 0);
> clk_ref_3 = clk_fixed("ref3", 3 * 1000 * 1000);
> clk_ref_1 = clk_fixed("ref1", 1 * 1000 * 1000);
>
> Then you can drop your clk code and get a clk_dump command
> which you can use to see what clocks you have.
RFC
ok I ask here before submitting the whole set because I'm not sure if this is a convenient solution.
I'm not sure if you are suggesting to have two different clock definition one for clk_fixed and the other one for clkdev,
so I was thinking something like:
enum brcm_clks {
dummy, clk_ref_3, clk_ref_1, clks_max
};
static struct clk *clks[clks_max];
int brmc_clk_create(struct clk *clk, const char *con_id, const char *dev_id)
{
struct clk_lookup *clkdev;
clkdev = clkdev_alloc(clk, con_id, dev_id);
if (!clkdev)
return -ENOMEM;
clkdev_add(clkdev);
return 0;
}
static int bcm2835_clk_init(void)
{
int ret;
clks[dummy] = clk_fixed("dummy", 0);
ret = brmc_clk_create(clks[dummy], "apb_pclk", NULL);
if (ret)
goto clk_err;
clks[clk_ref_3] = clk_fixed("ref3", 3 * 1000 * 1000);
ret = brmc_clk_create(clks[clk_ref_3], NULL, "uart0-pl0110");
if (ret)
goto clk_err;
clks[clk_ref_1] = clk_fixed("ref1", 1 * 1000 * 1000);
ret = brmc_clk_create(clks[clk_ref_1], NULL, "bcm2835-cs");
if (ret)
goto clk_err;
return 0;
clk_err:
return ret;
}
postcore_initcall(bcm2835_clk_init);
Any comment on this solution?
--
Carlo Caione
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 4/5] BCM2835: add support (arch)
2012-10-17 22:27 ` Carlo Caione
@ 2012-10-18 7:02 ` Sascha Hauer
0 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2012-10-18 7:02 UTC (permalink / raw)
To: Carlo Caione; +Cc: barebox
On Thu, Oct 18, 2012 at 12:27:14AM +0200, Carlo Caione wrote:
>
> On Oct 16, 2012, at 11:24 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> > On Tue, Oct 16, 2012 at 08:04:44PM +0200, Carlo Caione wrote:
> >> +
> >> +static struct clk ref_3_clk = {
> >> + .rate = 3 * 1000 * 1000,
> >> +};
> >> +
> >> +static struct clk ref_1_clk = {
> >> + .rate = 1 * 1000 * 1000,
> >> +};
> >
> > Add a 'select COMMON_CLK' to your Kconfig and do a:
> >
> > clk_dummy = clk_fixed("dummy", 0);
> > clk_ref_3 = clk_fixed("ref3", 3 * 1000 * 1000);
> > clk_ref_1 = clk_fixed("ref1", 1 * 1000 * 1000);
> >
> > Then you can drop your clk code and get a clk_dump command
> > which you can use to see what clocks you have.
>
> RFC
>
> ok I ask here before submitting the whole set because I'm not sure if this is a convenient solution.
> I'm not sure if you are suggesting to have two different clock definition one for clk_fixed and the other one for clkdev,
> so I was thinking something like:
>
> enum brcm_clks {
> dummy, clk_ref_3, clk_ref_1, clks_max
> };
>
> static struct clk *clks[clks_max];
>
> int brmc_clk_create(struct clk *clk, const char *con_id, const char *dev_id)
> {
> struct clk_lookup *clkdev;
>
> clkdev = clkdev_alloc(clk, con_id, dev_id);
> if (!clkdev)
> return -ENOMEM;
> clkdev_add(clkdev);
> return 0;
> }
>
> static int bcm2835_clk_init(void)
> {
> int ret;
>
> clks[dummy] = clk_fixed("dummy", 0);
> ret = brmc_clk_create(clks[dummy], "apb_pclk", NULL);
> if (ret)
> goto clk_err;
>
> clks[clk_ref_3] = clk_fixed("ref3", 3 * 1000 * 1000);
> ret = brmc_clk_create(clks[clk_ref_3], NULL, "uart0-pl0110");
> if (ret)
> goto clk_err;
>
> clks[clk_ref_1] = clk_fixed("ref1", 1 * 1000 * 1000);
> ret = brmc_clk_create(clks[clk_ref_1], NULL, "bcm2835-cs");
> if (ret)
> goto clk_err;
The above is basically what I was thinking of. The only thing I see that
this *looks* like there is exactly one lookup per clock. This indeed is
the case currenty here, but this does not have to be true. A clock may
have multiple lookups, for example the ref3 clk may also be used by the
lcd controller or something else. So I suggest to first register all
clocks and the lookups afterwards.
What you have as brmc_clk_create could well be a generic helper
function, it will be useful for others aswell.
BTW error checking here is a good idea, but a rollback of the allocated
resources will be unnecessary as you are doomed anyway when something
fails here.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 4/5] BCM2835: add support (arch)
2012-10-18 19:42 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
@ 2012-10-18 19:42 ` Carlo Caione
0 siblings, 0 replies; 18+ messages in thread
From: Carlo Caione @ 2012-10-18 19:42 UTC (permalink / raw)
To: barebox
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
arch/arm/Kconfig | 10 +++
arch/arm/Makefile | 1 +
arch/arm/mach-bcm2835/Kconfig | 3 +
arch/arm/mach-bcm2835/Makefile | 1 +
arch/arm/mach-bcm2835/core.c | 101 ++++++++++++++++++++++++++
arch/arm/mach-bcm2835/include/mach/clkdev.h | 7 ++
arch/arm/mach-bcm2835/include/mach/core.h | 22 ++++++
arch/arm/mach-bcm2835/include/mach/gpio.h | 1 +
arch/arm/mach-bcm2835/include/mach/platform.h | 50 +++++++++++++
arch/arm/mach-bcm2835/include/mach/wd.h | 47 ++++++++++++
10 files changed, 243 insertions(+)
create mode 100644 arch/arm/mach-bcm2835/Kconfig
create mode 100644 arch/arm/mach-bcm2835/Makefile
create mode 100644 arch/arm/mach-bcm2835/core.c
create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/wd.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 69a6e57..2e2a8ff 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -31,6 +31,15 @@ config ARCH_AT91
select HAS_DEBUG_LL
select HAVE_MACH_ARM_HEAD
+config ARCH_BCM2835
+ bool "Broadcom BCM2835 boards"
+ select GPIOLIB
+ select CPU_ARM1176
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CLOCKSOURCE_BCM2835
+ select ARM_AMBA
+
config ARCH_EP93XX
bool "Cirrus Logic EP93xx"
select CPU_ARM920T
@@ -100,6 +109,7 @@ endchoice
source arch/arm/cpu/Kconfig
source arch/arm/mach-at91/Kconfig
+source arch/arm/mach-bcm2835/Kconfig
source arch/arm/mach-ep93xx/Kconfig
source arch/arm/mach-imx/Kconfig
source arch/arm/mach-mxs/Kconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index de570d7..3449fd7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -52,6 +52,7 @@ AFLAGS += -include asm/unified.h -msoft-float $(AFLAGS_THUMB2)
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) := at91
+machine-$(CONFIG_ARCH_BCM2835) := bcm2835
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_MXS) := mxs
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
new file mode 100644
index 0000000..c42fe1c
--- /dev/null
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -0,0 +1,3 @@
+if ARCH_BCM2835
+
+endif
diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile
new file mode 100644
index 0000000..820eb10
--- /dev/null
+++ b/arch/arm/mach-bcm2835/Makefile
@@ -0,0 +1 @@
+obj-y += core.o
diff --git a/arch/arm/mach-bcm2835/core.c b/arch/arm/mach-bcm2835/core.c
new file mode 100644
index 0000000..b0fec8b
--- /dev/null
+++ b/arch/arm/mach-bcm2835/core.c
@@ -0,0 +1,101 @@
+/*
+ * Author: Carlo Caione <carlo@carlocaione.org>
+ *
+ * Based on mach-nomadik
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include <io.h>
+#include <asm/armlinux.h>
+#include <sizes.h>
+
+#include <mach/platform.h>
+#include <mach/wd.h>
+#include <mach/core.h>
+#include <linux/amba/bus.h>
+
+enum brcm_clks {
+ dummy, clk_ref_3, clk_ref_1, clks_max
+};
+
+static struct clk *clks[clks_max];
+
+static int bcm2835_clk_init(void)
+{
+ int ret;
+
+ clks[dummy] = clk_fixed("dummy", 0);
+ clks[clk_ref_3] = clk_fixed("ref3", 3 * 1000 * 1000);
+ clks[clk_ref_1] = clk_fixed("ref1", 1 * 1000 * 1000);
+
+ ret = clk_register_clkdev(clks[dummy], "apb_pclk", NULL);
+ if (ret)
+ goto clk_err;
+
+ ret = clk_register_clkdev(clks[clk_ref_3], NULL, "uart0-pl0110");
+ if (ret)
+ goto clk_err;
+
+ ret = clk_register_clkdev(clks[clk_ref_1], NULL, "bcm2835-cs");
+ if (ret)
+ goto clk_err;
+
+ return 0;
+
+clk_err:
+ return ret;
+
+}
+postcore_initcall(bcm2835_clk_init);
+
+static int bcm2835_dev_init(void)
+{
+ add_generic_device("bcm2835-gpio", 0, NULL, BCM2835_GPIO_BASE, 0xB0, IORESOURCE_MEM, NULL);
+ add_generic_device("bcm2835-cs", DEVICE_ID_SINGLE, NULL, BCM2835_ST_BASE, 0x1C, IORESOURCE_MEM, NULL);
+ return 0;
+}
+coredevice_initcall(bcm2835_dev_init);
+
+void bcm2835_register_uart(void)
+{
+ amba_apb_device_add(NULL, "uart0-pl011", 0, BCM2835_UART0_BASE, 4096, NULL, 0);
+}
+
+void bcm2835_add_device_sdram(u32 size)
+{
+ if (!size)
+ size = get_ram_size((ulong *) BCM2835_SDRAM_BASE, SZ_128M);
+
+ arm_add_mem_device("ram0", BCM2835_SDRAM_BASE, size);
+}
+#define RESET_TIMEOUT 10
+
+void __noreturn reset_cpu (unsigned long addr)
+{
+ uint32_t rstc;
+
+ rstc = readl(PM_RSTC);
+ rstc &= ~PM_RSTC_WRCFG_SET;
+ rstc |= PM_RSTC_WRCFG_FULL_RESET;
+ writel(PM_PASSWORD | RESET_TIMEOUT, PM_WDOG);
+ writel(PM_PASSWORD | rstc, PM_RSTC);
+}
+EXPORT_SYMBOL(reset_cpu);
diff --git a/arch/arm/mach-bcm2835/include/mach/clkdev.h b/arch/arm/mach-bcm2835/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/core.h b/arch/arm/mach-bcm2835/include/mach/core.h
new file mode 100644
index 0000000..9379af2
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/core.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __BCM2835_CORE_H__
+#define __BCM2835_CORE_H__
+
+void bcm2835_register_uart(void);
+void bcm2835_add_device_sdram(u32 size);
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/gpio.h b/arch/arm/mach-bcm2835/include/mach/gpio.h
new file mode 100644
index 0000000..306ab4c
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/gpio.h
@@ -0,0 +1 @@
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-bcm2835/include/mach/platform.h b/arch/arm/mach-bcm2835/include/mach/platform.h
new file mode 100644
index 0000000..e55085a
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/platform.h
@@ -0,0 +1,50 @@
+/*
+ * Extract from arch/arm/mach-bcm2708/include/mach/platform.h
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _BCM2835_PLATFORM_H
+#define _BCM2835_PLATFORM_H
+
+/*
+ * SDRAM
+ */
+#define BCM2835_SDRAM_BASE 0x00000000
+
+/*
+ * Definitions and addresses for the ARM CONTROL logic
+ * This file is manually generated.
+ */
+
+#define BCM2835_PERI_BASE 0x20000000
+#define BCM2835_ST_BASE (BCM2835_PERI_BASE + 0x3000) /* System Timer */
+#define BCM2835_DMA_BASE (BCM2835_PERI_BASE + 0x7000) /* DMA controller */
+#define BCM2835_ARM_BASE (BCM2835_PERI_BASE + 0xB000) /* BCM2708 ARM control block */
+#define BCM2835_PM_BASE (BCM2835_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */
+#define BCM2835_GPIO_BASE (BCM2835_PERI_BASE + 0x200000) /* GPIO */
+#define BCM2835_UART0_BASE (BCM2835_PERI_BASE + 0x201000) /* Uart 0 */
+#define BCM2835_MMCI0_BASE (BCM2835_PERI_BASE + 0x202000) /* MMC interface */
+#define BCM2835_SPI0_BASE (BCM2835_PERI_BASE + 0x204000) /* SPI0 */
+#define BCM2835_BSC0_BASE (BCM2835_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
+#define BCM2835_UART1_BASE (BCM2835_PERI_BASE + 0x215000) /* Uart 1 */
+#define BCM2835_EMMC_BASE (BCM2835_PERI_BASE + 0x300000) /* eMMC interface */
+#define BCM2835_SMI_BASE (BCM2835_PERI_BASE + 0x600000) /* SMI */
+#define BCM2835_BSC1_BASE (BCM2835_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */
+#define BCM2835_USB_BASE (BCM2835_PERI_BASE + 0x980000) /* DTC_OTG USB controller */
+#define BCM2835_MCORE_BASE (BCM2835_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/
+
+#endif
+
+/* END */
diff --git a/arch/arm/mach-bcm2835/include/mach/wd.h b/arch/arm/mach-bcm2835/include/mach/wd.h
new file mode 100644
index 0000000..ad8b762
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/wd.h
@@ -0,0 +1,47 @@
+/*
+ * Extract from arch/arm/mach-bcm2708/include/mach/platform.h
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _WD_H
+#define _WD_H
+
+/*
+ * Watchdog
+ */
+#define PM_RSTC (BCM2835_PM_BASE+0x1c)
+#define PM_RSTS (BCM2835_PM_BASE+0x20)
+#define PM_WDOG (BCM2835_PM_BASE+0x24)
+
+#define PM_WDOG_RESET 0000000000
+#define PM_PASSWORD 0x5a000000
+#define PM_WDOG_TIME_SET 0x000fffff
+#define PM_RSTC_WRCFG_CLR 0xffffffcf
+#define PM_RSTC_WRCFG_SET 0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
+#define PM_RSTC_RESET 0x00000102
+
+#define PM_RSTS_HADPOR_SET 0x00001000
+#define PM_RSTS_HADSRH_SET 0x00000400
+#define PM_RSTS_HADSRF_SET 0x00000200
+#define PM_RSTS_HADSRQ_SET 0x00000100
+#define PM_RSTS_HADWRH_SET 0x00000040
+#define PM_RSTS_HADWRF_SET 0x00000020
+#define PM_RSTS_HADWRQ_SET 0x00000010
+#define PM_RSTS_HADDRH_SET 0x00000004
+#define PM_RSTS_HADDRF_SET 0x00000002
+#define PM_RSTS_HADDRQ_SET 0x00000001
+
+#endif
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 4/5] BCM2835: add support (arch)
2012-10-13 14:00 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
@ 2012-10-13 14:00 ` Carlo Caione
0 siblings, 0 replies; 18+ messages in thread
From: Carlo Caione @ 2012-10-13 14:00 UTC (permalink / raw)
To: barebox
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
arch/arm/Kconfig | 9 +++
arch/arm/Makefile | 1 +
arch/arm/mach-bcm2835/Kconfig | 3 +
arch/arm/mach-bcm2835/Makefile | 2 +
arch/arm/mach-bcm2835/clock.c | 39 ++++++++++
arch/arm/mach-bcm2835/core.c | 105 ++++++++++++++++++++++++++
arch/arm/mach-bcm2835/include/mach/clkdev.h | 7 ++
arch/arm/mach-bcm2835/include/mach/clock.h | 8 ++
arch/arm/mach-bcm2835/include/mach/core.h | 27 +++++++
arch/arm/mach-bcm2835/include/mach/gpio.h | 1 +
arch/arm/mach-bcm2835/include/mach/platform.h | 53 +++++++++++++
arch/arm/mach-bcm2835/include/mach/wd.h | 50 ++++++++++++
12 files changed, 305 insertions(+)
create mode 100644 arch/arm/mach-bcm2835/Kconfig
create mode 100644 arch/arm/mach-bcm2835/Makefile
create mode 100644 arch/arm/mach-bcm2835/clock.c
create mode 100644 arch/arm/mach-bcm2835/core.c
create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/clock.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/wd.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ffeb4bf..de78b65 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -31,6 +31,14 @@ config ARCH_AT91
select HAS_DEBUG_LL
select HAVE_MACH_ARM_HEAD
+config ARCH_BCM2835
+ bool "Broadcom BCM2835 boards"
+ select GPIOLIB
+ select CPU_ARM1176
+ select CLKDEV_LOOKUP
+ select CLOCKSOURCE_BCM2835
+ select ARM_AMBA
+
config ARCH_EP93XX
bool "Cirrus Logic EP93xx"
select CPU_ARM920T
@@ -102,6 +110,7 @@ endchoice
source arch/arm/cpu/Kconfig
source arch/arm/mach-at91/Kconfig
+source arch/arm/mach-bcm2835/Kconfig
source arch/arm/mach-ep93xx/Kconfig
source arch/arm/mach-imx/Kconfig
source arch/arm/mach-mxs/Kconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index de570d7..3449fd7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -52,6 +52,7 @@ AFLAGS += -include asm/unified.h -msoft-float $(AFLAGS_THUMB2)
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) := at91
+machine-$(CONFIG_ARCH_BCM2835) := bcm2835
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_MXS) := mxs
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
new file mode 100644
index 0000000..c42fe1c
--- /dev/null
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -0,0 +1,3 @@
+if ARCH_BCM2835
+
+endif
diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile
new file mode 100644
index 0000000..f0aa2e0
--- /dev/null
+++ b/arch/arm/mach-bcm2835/Makefile
@@ -0,0 +1,2 @@
+obj-y += core.o
+obj-y += clock.o
\ No newline at end of file
diff --git a/arch/arm/mach-bcm2835/clock.c b/arch/arm/mach-bcm2835/clock.c
new file mode 100644
index 0000000..31400ea
--- /dev/null
+++ b/arch/arm/mach-bcm2835/clock.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2009 Alessandro Rubini
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <mach/clock.h>
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return -EIO;
+}
+EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-bcm2835/core.c b/arch/arm/mach-bcm2835/core.c
new file mode 100644
index 0000000..4c1bf28
--- /dev/null
+++ b/arch/arm/mach-bcm2835/core.c
@@ -0,0 +1,105 @@
+/*
+ * Author: Carlo Caione <carlo@carlocaione.org>
+ *
+ * Based on mach-nomadik
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <io.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/armlinux.h>
+#include <sizes.h>
+
+#include <mach/platform.h>
+#include <mach/wd.h>
+#include <mach/core.h>
+#include <mach/clock.h>
+#include <linux/amba/bus.h>
+
+static struct clk ref_3_clk = {
+ .rate = 3 * 1000 * 1000,
+};
+
+static struct clk ref_1_clk = {
+ .rate = 1 * 1000 * 1000,
+};
+
+static struct clk bcm2835_dummy;
+
+void bcm2835_add_device_sdram(u32 size)
+{
+ if (!size)
+ size = get_ram_size((ulong *) BCM2835_SDRAM_BASE, SZ_128M);
+
+ arm_add_mem_device("ram0", BCM2835_SDRAM_BASE, size);
+}
+
+static struct clk_lookup clocks_lookups[] = {
+ CLKDEV_CON_ID("apb_pclk", &bcm2835_dummy),
+ CLKDEV_DEV_ID("bcm2835-cs", &ref_1_clk),
+ CLKDEV_DEV_ID("uart0-pl0110", &ref_3_clk),
+};
+
+static int bcm2835_gpio_init(void)
+{
+ add_generic_device("bcm2835-gpio", 0, NULL, BCM2835_GPIO_BASE, 0xB0, IORESOURCE_MEM, NULL);
+ return 0;
+}
+coredevice_initcall(bcm2835_gpio_init);
+
+static int bcm2835_clkdev_init(void)
+{
+ clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups));
+ return 0;
+}
+postcore_initcall(bcm2835_clkdev_init);
+
+static int bcm2835_clocksource_init(void)
+{
+ add_generic_device("bcm2835-cs", DEVICE_ID_SINGLE, NULL, BCM2835_ST_BASE, 0x1C, IORESOURCE_MEM, NULL);
+ return 0;
+}
+coredevice_initcall(bcm2835_clocksource_init);
+
+void bcm2835_register_uart(void)
+{
+ amba_apb_device_add(NULL, "uart0-pl011", 0, BCM2835_UART0_BASE, 4096, NULL, 0);
+}
+
+#define RESET_TIMEOUT 10
+
+void __noreturn reset_cpu (unsigned long addr)
+{
+ uint32_t rstc;
+
+ rstc = readl(PM_RSTC);
+ rstc &= ~PM_RSTC_WRCFG_SET;
+ rstc |= PM_RSTC_WRCFG_FULL_RESET;
+ writel(PM_PASSWORD | RESET_TIMEOUT, PM_WDOG);
+ writel(PM_PASSWORD | rstc, PM_RSTC);
+}
+EXPORT_SYMBOL(reset_cpu);
diff --git a/arch/arm/mach-bcm2835/include/mach/clkdev.h b/arch/arm/mach-bcm2835/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/clock.h b/arch/arm/mach-bcm2835/include/mach/clock.h
new file mode 100644
index 0000000..0550bf1
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/clock.h
@@ -0,0 +1,8 @@
+#ifndef _BCM2835_CLOCK_H
+#define _BCM2835_CLOCK_H
+
+struct clk {
+ unsigned long rate;
+};
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/core.h b/arch/arm/mach-bcm2835/include/mach/core.h
new file mode 100644
index 0000000..e60d947
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/core.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __BCM2835_CORE_H__
+#define __BCM2835_CORE_H__
+
+void bcm2835_register_uart(void);
+void bcm2835_add_device_sdram(u32 size);
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/gpio.h b/arch/arm/mach-bcm2835/include/mach/gpio.h
new file mode 100644
index 0000000..306ab4c
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/gpio.h
@@ -0,0 +1 @@
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-bcm2835/include/mach/platform.h b/arch/arm/mach-bcm2835/include/mach/platform.h
new file mode 100644
index 0000000..a058ec5
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/platform.h
@@ -0,0 +1,53 @@
+/*
+ * Extract from arch/arm/mach-bcm2708/include/mach/platform.h
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _BCM2835_PLATFORM_H
+#define _BCM2835_PLATFORM_H
+
+/*
+ * SDRAM
+ */
+#define BCM2835_SDRAM_BASE 0x00000000
+
+/*
+ * Definitions and addresses for the ARM CONTROL logic
+ * This file is manually generated.
+ */
+
+#define BCM2835_PERI_BASE 0x20000000
+#define BCM2835_ST_BASE (BCM2835_PERI_BASE + 0x3000) /* System Timer */
+#define BCM2835_DMA_BASE (BCM2835_PERI_BASE + 0x7000) /* DMA controller */
+#define BCM2835_ARM_BASE (BCM2835_PERI_BASE + 0xB000) /* BCM2708 ARM control block */
+#define BCM2835_PM_BASE (BCM2835_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */
+#define BCM2835_GPIO_BASE (BCM2835_PERI_BASE + 0x200000) /* GPIO */
+#define BCM2835_UART0_BASE (BCM2835_PERI_BASE + 0x201000) /* Uart 0 */
+#define BCM2835_MMCI0_BASE (BCM2835_PERI_BASE + 0x202000) /* MMC interface */
+#define BCM2835_SPI0_BASE (BCM2835_PERI_BASE + 0x204000) /* SPI0 */
+#define BCM2835_BSC0_BASE (BCM2835_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
+#define BCM2835_UART1_BASE (BCM2835_PERI_BASE + 0x215000) /* Uart 1 */
+#define BCM2835_EMMC_BASE (BCM2835_PERI_BASE + 0x300000) /* eMMC interface */
+#define BCM2835_SMI_BASE (BCM2835_PERI_BASE + 0x600000) /* SMI */
+#define BCM2835_BSC1_BASE (BCM2835_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */
+#define BCM2835_USB_BASE (BCM2835_PERI_BASE + 0x980000) /* DTC_OTG USB controller */
+#define BCM2835_MCORE_BASE (BCM2835_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/
+
+#endif
+
+/* END */
diff --git a/arch/arm/mach-bcm2835/include/mach/wd.h b/arch/arm/mach-bcm2835/include/mach/wd.h
new file mode 100644
index 0000000..8046734
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/wd.h
@@ -0,0 +1,50 @@
+/*
+ * Extract from arch/arm/mach-bcm2708/include/mach/platform.h
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _WD_H
+#define _WD_H
+
+/*
+ * Watchdog
+ */
+#define PM_RSTC (BCM2835_PM_BASE+0x1c)
+#define PM_RSTS (BCM2835_PM_BASE+0x20)
+#define PM_WDOG (BCM2835_PM_BASE+0x24)
+
+#define PM_WDOG_RESET 0000000000
+#define PM_PASSWORD 0x5a000000
+#define PM_WDOG_TIME_SET 0x000fffff
+#define PM_RSTC_WRCFG_CLR 0xffffffcf
+#define PM_RSTC_WRCFG_SET 0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
+#define PM_RSTC_RESET 0x00000102
+
+#define PM_RSTS_HADPOR_SET 0x00001000
+#define PM_RSTS_HADSRH_SET 0x00000400
+#define PM_RSTS_HADSRF_SET 0x00000200
+#define PM_RSTS_HADSRQ_SET 0x00000100
+#define PM_RSTS_HADWRH_SET 0x00000040
+#define PM_RSTS_HADWRF_SET 0x00000020
+#define PM_RSTS_HADWRQ_SET 0x00000010
+#define PM_RSTS_HADDRH_SET 0x00000004
+#define PM_RSTS_HADDRF_SET 0x00000002
+#define PM_RSTS_HADDRQ_SET 0x00000001
+
+#endif
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 4/5] BCM2835: add support (arch)
2012-10-13 11:22 [PATCH 0/5] BCM2835/Raspberry-Pi Carlo Caione
@ 2012-10-13 11:23 ` Carlo Caione
0 siblings, 0 replies; 18+ messages in thread
From: Carlo Caione @ 2012-10-13 11:23 UTC (permalink / raw)
To: barebox
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
arch/arm/Kconfig | 9 +++
arch/arm/Makefile | 1 +
arch/arm/mach-bcm2835/Kconfig | 3 +
arch/arm/mach-bcm2835/Makefile | 2 +
arch/arm/mach-bcm2835/clock.c | 39 ++++++++++
arch/arm/mach-bcm2835/core.c | 105 ++++++++++++++++++++++++++
arch/arm/mach-bcm2835/include/mach/clkdev.h | 7 ++
arch/arm/mach-bcm2835/include/mach/clock.h | 8 ++
arch/arm/mach-bcm2835/include/mach/core.h | 27 +++++++
arch/arm/mach-bcm2835/include/mach/gpio.h | 1 +
arch/arm/mach-bcm2835/include/mach/platform.h | 53 +++++++++++++
arch/arm/mach-bcm2835/include/mach/wd.h | 50 ++++++++++++
12 files changed, 305 insertions(+)
create mode 100644 arch/arm/mach-bcm2835/Kconfig
create mode 100644 arch/arm/mach-bcm2835/Makefile
create mode 100644 arch/arm/mach-bcm2835/clock.c
create mode 100644 arch/arm/mach-bcm2835/core.c
create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/clock.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/wd.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1e45ebf..512bd44 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -31,6 +31,14 @@ config ARCH_AT91
select HAS_DEBUG_LL
select HAVE_MACH_ARM_HEAD
+config ARCH_BCM2835
+ bool "Broadcom BCM2835 boards"
+ select GPIOLIB
+ select CPU_ARM1176
+ select CLKDEV_LOOKUP
+ select CLOCKSOURCE_BCM2835
+ select ARM_AMBA
+
config ARCH_EP93XX
bool "Cirrus Logic EP93xx"
select CPU_ARM920T
@@ -101,6 +109,7 @@ endchoice
source arch/arm/cpu/Kconfig
source arch/arm/mach-at91/Kconfig
+source arch/arm/mach-bcm2835/Kconfig
source arch/arm/mach-ep93xx/Kconfig
source arch/arm/mach-imx/Kconfig
source arch/arm/mach-mxs/Kconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 855043a..2ea11d6 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -52,6 +52,7 @@ AFLAGS += -include asm/unified.h -msoft-float $(AFLAGS_THUMB2)
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) := at91
+machine-$(CONFIG_ARCH_BCM2835) := bcm2835
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_MXS) := mxs
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
new file mode 100644
index 0000000..c42fe1c
--- /dev/null
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -0,0 +1,3 @@
+if ARCH_BCM2835
+
+endif
diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile
new file mode 100644
index 0000000..f0aa2e0
--- /dev/null
+++ b/arch/arm/mach-bcm2835/Makefile
@@ -0,0 +1,2 @@
+obj-y += core.o
+obj-y += clock.o
\ No newline at end of file
diff --git a/arch/arm/mach-bcm2835/clock.c b/arch/arm/mach-bcm2835/clock.c
new file mode 100644
index 0000000..31400ea
--- /dev/null
+++ b/arch/arm/mach-bcm2835/clock.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2009 Alessandro Rubini
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <mach/clock.h>
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return -EIO;
+}
+EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-bcm2835/core.c b/arch/arm/mach-bcm2835/core.c
new file mode 100644
index 0000000..4c1bf28
--- /dev/null
+++ b/arch/arm/mach-bcm2835/core.c
@@ -0,0 +1,105 @@
+/*
+ * Author: Carlo Caione <carlo@carlocaione.org>
+ *
+ * Based on mach-nomadik
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <io.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/armlinux.h>
+#include <sizes.h>
+
+#include <mach/platform.h>
+#include <mach/wd.h>
+#include <mach/core.h>
+#include <mach/clock.h>
+#include <linux/amba/bus.h>
+
+static struct clk ref_3_clk = {
+ .rate = 3 * 1000 * 1000,
+};
+
+static struct clk ref_1_clk = {
+ .rate = 1 * 1000 * 1000,
+};
+
+static struct clk bcm2835_dummy;
+
+void bcm2835_add_device_sdram(u32 size)
+{
+ if (!size)
+ size = get_ram_size((ulong *) BCM2835_SDRAM_BASE, SZ_128M);
+
+ arm_add_mem_device("ram0", BCM2835_SDRAM_BASE, size);
+}
+
+static struct clk_lookup clocks_lookups[] = {
+ CLKDEV_CON_ID("apb_pclk", &bcm2835_dummy),
+ CLKDEV_DEV_ID("bcm2835-cs", &ref_1_clk),
+ CLKDEV_DEV_ID("uart0-pl0110", &ref_3_clk),
+};
+
+static int bcm2835_gpio_init(void)
+{
+ add_generic_device("bcm2835-gpio", 0, NULL, BCM2835_GPIO_BASE, 0xB0, IORESOURCE_MEM, NULL);
+ return 0;
+}
+coredevice_initcall(bcm2835_gpio_init);
+
+static int bcm2835_clkdev_init(void)
+{
+ clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups));
+ return 0;
+}
+postcore_initcall(bcm2835_clkdev_init);
+
+static int bcm2835_clocksource_init(void)
+{
+ add_generic_device("bcm2835-cs", DEVICE_ID_SINGLE, NULL, BCM2835_ST_BASE, 0x1C, IORESOURCE_MEM, NULL);
+ return 0;
+}
+coredevice_initcall(bcm2835_clocksource_init);
+
+void bcm2835_register_uart(void)
+{
+ amba_apb_device_add(NULL, "uart0-pl011", 0, BCM2835_UART0_BASE, 4096, NULL, 0);
+}
+
+#define RESET_TIMEOUT 10
+
+void __noreturn reset_cpu (unsigned long addr)
+{
+ uint32_t rstc;
+
+ rstc = readl(PM_RSTC);
+ rstc &= ~PM_RSTC_WRCFG_SET;
+ rstc |= PM_RSTC_WRCFG_FULL_RESET;
+ writel(PM_PASSWORD | RESET_TIMEOUT, PM_WDOG);
+ writel(PM_PASSWORD | rstc, PM_RSTC);
+}
+EXPORT_SYMBOL(reset_cpu);
diff --git a/arch/arm/mach-bcm2835/include/mach/clkdev.h b/arch/arm/mach-bcm2835/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/clock.h b/arch/arm/mach-bcm2835/include/mach/clock.h
new file mode 100644
index 0000000..0550bf1
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/clock.h
@@ -0,0 +1,8 @@
+#ifndef _BCM2835_CLOCK_H
+#define _BCM2835_CLOCK_H
+
+struct clk {
+ unsigned long rate;
+};
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/core.h b/arch/arm/mach-bcm2835/include/mach/core.h
new file mode 100644
index 0000000..e60d947
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/core.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __BCM2835_CORE_H__
+#define __BCM2835_CORE_H__
+
+void bcm2835_register_uart(void);
+void bcm2835_add_device_sdram(u32 size);
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/gpio.h b/arch/arm/mach-bcm2835/include/mach/gpio.h
new file mode 100644
index 0000000..306ab4c
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/gpio.h
@@ -0,0 +1 @@
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-bcm2835/include/mach/platform.h b/arch/arm/mach-bcm2835/include/mach/platform.h
new file mode 100644
index 0000000..a058ec5
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/platform.h
@@ -0,0 +1,53 @@
+/*
+ * Extract from arch/arm/mach-bcm2708/include/mach/platform.h
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _BCM2835_PLATFORM_H
+#define _BCM2835_PLATFORM_H
+
+/*
+ * SDRAM
+ */
+#define BCM2835_SDRAM_BASE 0x00000000
+
+/*
+ * Definitions and addresses for the ARM CONTROL logic
+ * This file is manually generated.
+ */
+
+#define BCM2835_PERI_BASE 0x20000000
+#define BCM2835_ST_BASE (BCM2835_PERI_BASE + 0x3000) /* System Timer */
+#define BCM2835_DMA_BASE (BCM2835_PERI_BASE + 0x7000) /* DMA controller */
+#define BCM2835_ARM_BASE (BCM2835_PERI_BASE + 0xB000) /* BCM2708 ARM control block */
+#define BCM2835_PM_BASE (BCM2835_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */
+#define BCM2835_GPIO_BASE (BCM2835_PERI_BASE + 0x200000) /* GPIO */
+#define BCM2835_UART0_BASE (BCM2835_PERI_BASE + 0x201000) /* Uart 0 */
+#define BCM2835_MMCI0_BASE (BCM2835_PERI_BASE + 0x202000) /* MMC interface */
+#define BCM2835_SPI0_BASE (BCM2835_PERI_BASE + 0x204000) /* SPI0 */
+#define BCM2835_BSC0_BASE (BCM2835_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
+#define BCM2835_UART1_BASE (BCM2835_PERI_BASE + 0x215000) /* Uart 1 */
+#define BCM2835_EMMC_BASE (BCM2835_PERI_BASE + 0x300000) /* eMMC interface */
+#define BCM2835_SMI_BASE (BCM2835_PERI_BASE + 0x600000) /* SMI */
+#define BCM2835_BSC1_BASE (BCM2835_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */
+#define BCM2835_USB_BASE (BCM2835_PERI_BASE + 0x980000) /* DTC_OTG USB controller */
+#define BCM2835_MCORE_BASE (BCM2835_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/
+
+#endif
+
+/* END */
diff --git a/arch/arm/mach-bcm2835/include/mach/wd.h b/arch/arm/mach-bcm2835/include/mach/wd.h
new file mode 100644
index 0000000..8046734
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/wd.h
@@ -0,0 +1,50 @@
+/*
+ * Extract from arch/arm/mach-bcm2708/include/mach/platform.h
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _WD_H
+#define _WD_H
+
+/*
+ * Watchdog
+ */
+#define PM_RSTC (BCM2835_PM_BASE+0x1c)
+#define PM_RSTS (BCM2835_PM_BASE+0x20)
+#define PM_WDOG (BCM2835_PM_BASE+0x24)
+
+#define PM_WDOG_RESET 0000000000
+#define PM_PASSWORD 0x5a000000
+#define PM_WDOG_TIME_SET 0x000fffff
+#define PM_RSTC_WRCFG_CLR 0xffffffcf
+#define PM_RSTC_WRCFG_SET 0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
+#define PM_RSTC_RESET 0x00000102
+
+#define PM_RSTS_HADPOR_SET 0x00001000
+#define PM_RSTS_HADSRH_SET 0x00000400
+#define PM_RSTS_HADSRF_SET 0x00000200
+#define PM_RSTS_HADSRQ_SET 0x00000100
+#define PM_RSTS_HADWRH_SET 0x00000040
+#define PM_RSTS_HADWRF_SET 0x00000020
+#define PM_RSTS_HADWRQ_SET 0x00000010
+#define PM_RSTS_HADDRH_SET 0x00000004
+#define PM_RSTS_HADDRF_SET 0x00000002
+#define PM_RSTS_HADDRQ_SET 0x00000001
+
+#endif
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2012-10-18 19:43 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-10-16 18:04 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
2012-10-16 18:04 ` [PATCH 1/5] BCM2835: add clocksource driver Carlo Caione
2012-10-16 18:04 ` [PATCH 2/5] BCM2835: add gpio driver Carlo Caione
2012-10-16 21:09 ` Sascha Hauer
2012-10-16 18:04 ` [PATCH 3/5] ARM1176: add support Carlo Caione
2012-10-16 18:04 ` [PATCH 4/5] BCM2835: add support (arch) Carlo Caione
2012-10-16 21:24 ` Sascha Hauer
2012-10-17 6:51 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-17 7:01 ` Sascha Hauer
2012-10-17 7:25 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-17 8:31 ` Carlo Caione
2012-10-17 21:00 ` Sascha Hauer
2012-10-17 22:27 ` Carlo Caione
2012-10-18 7:02 ` Sascha Hauer
2012-10-16 18:04 ` [PATCH 5/5] Raspberry-Pi: add support (board) Carlo Caione
-- strict thread matches above, loose matches on Subject: below --
2012-10-18 19:42 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
2012-10-18 19:42 ` [PATCH 4/5] BCM2835: add support (arch) Carlo Caione
2012-10-13 14:00 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
2012-10-13 14:00 ` [PATCH 4/5] BCM2835: add support (arch) Carlo Caione
2012-10-13 11:22 [PATCH 0/5] BCM2835/Raspberry-Pi Carlo Caione
2012-10-13 11:23 ` [PATCH 4/5] BCM2835: add support (arch) Carlo Caione
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox