mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 3/3] at91sam9x5ek: switch to hw pmecc nand support
Date: Wed, 17 Oct 2012 20:04:25 +0200	[thread overview]
Message-ID: <1350497065-21893-3-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1350497065-21893-1-git-send-email-plagnioj@jcrosoft.com>

now we can flash barebox by itself as the bootstrap need to use pmecc

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/at91sam9x5ek/init.c     |    3 +++
 arch/arm/configs/at91sam9x5ek_defconfig |   11 ++++++-----
 2 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boards/at91sam9x5ek/init.c b/arch/arm/boards/at91sam9x5ek/init.c
index 58c945c..d15b75a 100644
--- a/arch/arm/boards/at91sam9x5ek/init.c
+++ b/arch/arm/boards/at91sam9x5ek/init.c
@@ -45,6 +45,9 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= 0,
 	.rdy_pin	= AT91_PIN_PD5,
 	.enable_pin	= AT91_PIN_PD4,
+	.ecc_mode	= NAND_ECC_HW,
+	.pmecc_sector_size = 512,
+	.pmecc_corr_cap = 2,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #endif
diff --git a/arch/arm/configs/at91sam9x5ek_defconfig b/arch/arm/configs/at91sam9x5ek_defconfig
index cda360d..7ce5b71 100644
--- a/arch/arm/configs/at91sam9x5ek_defconfig
+++ b/arch/arm/configs/at91sam9x5ek_defconfig
@@ -23,11 +23,10 @@ CONFIG_CMD_SAVEENV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_READLINE=y
+CONFIG_CMD_TFTP=y
 CONFIG_CMD_ECHO_E=y
 CONFIG_CMD_LOADB=y
 CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MTEST=y
-CONFIG_CMD_MTEST_ALTERNATIVE=y
 CONFIG_CMD_FLASH=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
 CONFIG_CMD_BOOTM_INITRD=y
@@ -38,6 +37,8 @@ CONFIG_CMD_UIMAGE=y
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
 CONFIG_CMD_OFTREE=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_GPIO=y
@@ -47,17 +48,16 @@ CONFIG_NET=y
 CONFIG_NET_DHCP=y
 CONFIG_NET_NFS=y
 CONFIG_NET_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_FS_TFTP=y
 CONFIG_NET_NETCONSOLE=y
 CONFIG_DRIVER_NET_MACB=y
 # CONFIG_SPI is not set
 CONFIG_MTD=y
 CONFIG_NAND=y
-# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_SOFT is not set
 # CONFIG_NAND_ECC_HW_SYNDROME is not set
 # CONFIG_NAND_ECC_HW_NONE is not set
 CONFIG_NAND_ATMEL=y
+CONFIG_NAND_ATMEL_PMECC=y
 CONFIG_UBI=y
 CONFIG_DISK=y
 CONFIG_DISK_WRITE=y
@@ -65,6 +65,7 @@ CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_LED_TRIGGERS=y
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_FS_TFTP=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
 CONFIG_FS_FAT_LFN=y
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-10-17 18:06 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-17 18:00 [PATCH 0/3] at91sam9x5 add nand pmecc support Jean-Christophe PLAGNIOL-VILLARD
2012-10-17 18:04 ` [PATCH 1/3] nand: atmel add " Jean-Christophe PLAGNIOL-VILLARD
2012-10-17 18:04   ` [PATCH 2/3] at91sam9x5: " Jean-Christophe PLAGNIOL-VILLARD
2012-10-17 18:04   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-10-21  8:34 ` [PATCH 0/3] at91sam9x5 add nand " Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1350497065-21893-3-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox