[PATCH] add 'miitool' command to view media-independent interface status

* [PATCH] add 'miitool' command to view media-independent interface status
@ 2012-10-18  8:54 Antony Pavlov
  2012-10-21  8:37 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Antony Pavlov @ 2012-10-18  8:54 UTC (permalink / raw)
  To: barebox

This command is based on the 'mii-diag' and 'mii-tool'
Unix utilities, but it lacks routines to manipulate
MII state (e.g. reset MII, restart autonegotiation
or force MII mode).

This version of the 'miitool' command has no GbE support,
but we can upgrade it in the future. The GbE support
patch for generic 'mii-tool' is here
http://ftp.debian.org/debian/pool/main/n/net-tools/net-tools_1.60-24.2.diff.gz

EXAMPLE:

barebox:/ miitool -vv /dev/phy0
negotiated 100baseTx-FD, link ok
  registers for MII PHY:
    3100 782d 0013 78e2 01e1 45e1 0007 2001
    0000 ffff ffff ffff ffff ffff ffff ffff
    0084 4780 0000 0000 0422 0000 0000 0000
    0000 0000 0080 0000 ffff 0000 0000 3660
  product info: Level One LXT971A rev 2
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 commands/Kconfig   |   11 +++
 commands/Makefile  |    1 +
 commands/miitool.c |  268 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 280 insertions(+)
 create mode 100644 commands/miitool.c

diff --git a/commands/Kconfig b/commands/Kconfig
index 251d8b6..d89cda9 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -625,6 +625,17 @@ config CMD_USB
 	help
 	  The usb command allows to rescan for USB devices.
 
+config CMD_MIITOOL
+	tristate
+	depends on PHYLIB
+	prompt "miitool"
+	help
+	  The miitool command allows to view media-independent interface status.
+	  The default short output reports the negotiated link speed and
+	  link status for selected MII. The '-v' option displays more
+	  detailed MII status information, such as MII capabilities,
+	  current advertising mode, and link partner capabilities.
+
 config CMD_CLK
 	tristate
 	depends on COMMON_CLK
diff --git a/commands/Makefile b/commands/Makefile
index 7606643..ff98051 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -77,3 +77,4 @@ obj-$(CONFIG_CMD_LN)		+= ln.o
 obj-$(CONFIG_CMD_CLK)		+= clk.o
 obj-$(CONFIG_CMD_TFTP)		+= tftp.o
 obj-$(CONFIG_CMD_BAREBOX_UPDATE)+= barebox-update.o
+obj-$(CONFIG_CMD_MIITOOL)	+= miitool.o
diff --git a/commands/miitool.c b/commands/miitool.c
new file mode 100644
index 0000000..3a9ac45
--- /dev/null
+++ b/commands/miitool.c
@@ -0,0 +1,268 @@
+/*
+ * Copyright (C) 2012 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is based on Donald Becker's "mii-diag" and
+ * David A. Hinds' "mii-tool".
+ *
+ * mii-tool is written/copyright 2000 by David A. Hinds
+ *     <dhinds@pcmcia.sourceforge.org>
+ *
+ * mii-diag is written/copyright 1997-2000 by Donald Becker
+ *     <becker@scyld.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <init.h>
+#include <driver.h>
+#include <malloc.h>
+#include <errno.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <linux/stat.h>
+#include <xfuncs.h>
+#include <linux/mii.h>
+
+static u16 mdio_read(int fd, int offset)
+{
+	int ret;
+	u16 buf;
+
+	ret = lseek(fd, offset << 1, SEEK_SET);
+	if (ret < 0)
+		return 0;
+
+	ret = read(fd, &buf, sizeof(u16));
+	if (ret < 0)
+		return 0;
+
+	return buf;
+}
+
+/* Table of known MII's */
+static const struct {
+	u_short	id1, id2;
+	u_short	mask1, mask2;
+	char	*name;
+} mii_id[] = {
+	{ 0x0013, 0x78e0, 0xffff, 0xfff0, "Level One LXT971A" },
+};
+#define NMII (sizeof(mii_id)/sizeof(mii_id[0]))
+
+const struct {
+	char	*name;
+	u_short	value;
+} media[] = {
+	/* The order through 100baseT4 matches bits in the BMSR */
+	{ "10baseT-HD",	ADVERTISE_10HALF },
+	{ "10baseT-FD",	ADVERTISE_10FULL },
+	{ "100baseTx-HD",	ADVERTISE_100HALF },
+	{ "100baseTx-FD",	ADVERTISE_100FULL },
+	{ "100baseT4",	LPA_100BASE4 },
+	{ "100baseTx",	ADVERTISE_100FULL | ADVERTISE_100HALF },
+	{ "10baseT",	ADVERTISE_10FULL | ADVERTISE_10HALF },
+};
+#define NMEDIA (sizeof(media)/sizeof(media[0]))
+
+static char *media_list(int mask, int best)
+{
+	static char buf[100];
+	int i;
+
+	*buf = '\0';
+	mask >>= 5;
+	for (i = 4; i >= 0; i--) {
+		if (mask & (1 << i)) {
+			strcat(buf, " ");
+			strcat(buf, media[i].name);
+			if (best)
+				break;
+		}
+	}
+
+	if (mask & (1 << 5))
+		strcat(buf, " flow-control");
+
+	return buf;
+}
+
+static int show_basic_mii(int fd, int verbose)
+{
+	char buf[100];
+	int i, mii_val[32];
+	int bmcr, bmsr, advert, lkpar;
+
+	/* Some bits in the BMSR are latched, but we can't rely on being
+	   the only reader, so only the current values are meaningful */
+	mdio_read(fd, MII_BMSR);
+	for (i = 0; i < ((verbose > 1) ? 32 : 8); i++)
+		mii_val[i] = mdio_read(fd, i);
+
+	if (mii_val[MII_BMCR] == 0xffff) {
+		fprintf(stderr, "  No MII transceiver present!.\n");
+		return -1;
+	}
+
+	/* Descriptive rename. */
+	bmcr = mii_val[MII_BMCR];
+	bmsr = mii_val[MII_BMSR];
+	advert = mii_val[MII_ADVERTISE];
+	lkpar = mii_val[MII_LPA];
+
+	*buf = '\0';
+	if (bmcr & BMCR_ANENABLE) {
+		if (bmsr & BMSR_ANEGCOMPLETE) {
+			if (advert & lkpar) {
+				sprintf(buf, "%s%s, ", (lkpar & LPA_LPACK) ?
+					"negotiated" : "no autonegotiation,",
+					media_list(advert & lkpar, 1));
+			} else {
+				sprintf(buf, "autonegotiation failed, ");
+			}
+		} else if (bmcr & BMCR_ANRESTART) {
+			sprintf(buf, "autonegotiation restarted, ");
+		}
+	} else {
+		sprintf(buf, "%s Mbit, %s duplex, ",
+			(bmcr & BMCR_SPEED100) ? "100" : "10",
+			(bmcr & BMCR_FULLDPLX) ? "full" : "half");
+	}
+
+	strcat(buf, (bmsr & BMSR_LSTATUS) ? "link ok" : "no link");
+
+	printf("%s\n", buf);
+
+	if (verbose > 1) {
+		printf("  registers for MII PHY: ");
+		for (i = 0; i < 32; i++)
+			printf("%s %4.4x",
+				((i % 8) ? "" : "\n   "), mii_val[i]);
+
+		printf("\n");
+	}
+
+	if (verbose) {
+		printf("  product info: ");
+		for (i = 0; i < NMII; i++)
+			if ((mii_id[i].id1 == (mii_val[2] & mii_id[i].mask1)) &&
+				(mii_id[i].id2 ==
+					(mii_val[3] & mii_id[i].mask2)))
+				break;
+
+		if (i < NMII)
+			printf("%s rev %d\n", mii_id[i].name, mii_val[3]&0x0f);
+		else
+			printf("vendor %02x:%02x:%02x, model %d rev %d\n",
+				mii_val[2] >> 10, (mii_val[2] >> 2) & 0xff,
+				((mii_val[2] << 6)|(mii_val[3] >> 10)) & 0xff,
+				(mii_val[3] >> 4) & 0x3f, mii_val[3] & 0x0f);
+
+		printf("  basic mode:   ");
+		if (bmcr & BMCR_RESET)
+			printf("software reset, ");
+		if (bmcr & BMCR_LOOPBACK)
+			printf("loopback, ");
+		if (bmcr & BMCR_ISOLATE)
+			printf("isolate, ");
+		if (bmcr & BMCR_CTST)
+			printf("collision test, ");
+		if (bmcr & BMCR_ANENABLE) {
+			printf("autonegotiation enabled\n");
+		} else {
+			printf("%s Mbit, %s duplex\n",
+			   (bmcr & BMCR_SPEED100) ? "100" : "10",
+			   (bmcr & BMCR_FULLDPLX) ? "full" : "half");
+		}
+		printf("  basic status: ");
+		if (bmsr & BMSR_ANEGCOMPLETE)
+			printf("autonegotiation complete, ");
+		else if (bmcr & BMCR_ANRESTART)
+			printf("autonegotiation restarted, ");
+		if (bmsr & BMSR_RFAULT)
+			printf("remote fault, ");
+		printf((bmsr & BMSR_LSTATUS) ? "link ok" : "no link");
+		printf("\n  capabilities:%s", media_list(bmsr >> 6, 0));
+		printf("\n  advertising: %s", media_list(advert, 0));
+
+#define LPA_ABILITY_MASK	(LPA_10HALF | LPA_10FULL \
+				| LPA_100HALF | LPA_100FULL \
+				| LPA_100BASE4 | LPA_PAUSE_CAP)
+
+		if (lkpar & LPA_ABILITY_MASK)
+			printf("\n  link partner:%s", media_list(lkpar, 0));
+		printf("\n");
+	}
+
+	return 0;
+}
+
+static int do_miitool(int argc, char *argv[])
+{
+	char *filename;
+	int opt;
+	int argc_min;
+	int fd;
+	int verbose;
+
+	verbose = 0;
+	while ((opt = getopt(argc, argv, "v")) > 0) {
+		switch (opt) {
+		case 'v':
+			verbose++;
+			break;
+		default:
+			return COMMAND_ERROR_USAGE;
+		}
+	}
+
+	argc_min = optind + 1;
+
+	if (argc < argc_min)
+		return COMMAND_ERROR_USAGE;
+
+	filename = argv[optind];
+
+	fd = open(filename, O_RDONLY);
+	if (fd < 0) {
+		printf("unable to read %s\n", filename);
+		return COMMAND_ERROR;
+	}
+
+	show_basic_mii(fd, verbose);
+
+	close(fd);
+
+	return COMMAND_SUCCESS;
+}
+
+BAREBOX_CMD_HELP_START(miitool)
+BAREBOX_CMD_HELP_USAGE("miitool [[[-v] -v] -v] <phy>\n")
+BAREBOX_CMD_HELP_SHORT("view status for MII <phy>.\n")
+BAREBOX_CMD_HELP_END
+
+/**
+ * @page miitool_command
+This utility checks or sets the status of a network interface's
+Media Independent Interface (MII) unit. Most fast ethernet
+adapters use an MII to autonegotiate link speed and duplex setting.
+ */
+BAREBOX_CMD_START(miitool)
+	.cmd		= do_miitool,
+	.usage		= "view media-independent interface status",
+	BAREBOX_CMD_HELP(cmd_miitool_help)
+BAREBOX_CMD_END
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread