From: Alexander Aring <alex.aring@googlemail.com>
To: barebox@lists.infradead.org
Subject: [PATCH v2] nandtest: improve nandtest command
Date: Sat, 20 Oct 2012 09:13:52 +0200 [thread overview]
Message-ID: <1350717232-5685-1-git-send-email-alex.aring@gmail.com> (raw)
Improve nandtest command with following changes:
- Make ecc stats per page not per eraseblock.
- Replace current offset output with progressbar.
- Change parameter 'p' - 'passes' to 'i' - 'iterations'.
- Clean up code.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
---
Changes for v2:
fix meminfo.writesize instead of meminfo.erasesize in pwrite.
commands/nandtest.c | 157 +++++++++++++++++++++++++++++-----------------------
1 file changed, 89 insertions(+), 68 deletions(-)
diff --git a/commands/nandtest.c b/commands/nandtest.c
index d683b24..0a6215d 100644
--- a/commands/nandtest.c
+++ b/commands/nandtest.c
@@ -21,6 +21,7 @@
#include <linux/mtd/mtd-abi.h>
#include <fcntl.h>
#include <stdlib.h>
+#include <progress.h>
/* Max ECC Bits that can be corrected */
#define MAX_ECC_BITS 8
@@ -78,7 +79,7 @@ static ssize_t pwrite(int fd, const void *buf, size_t count, off_t offset)
perror("write");
if (markbad) {
printf("Mark block bad at 0x%08x\n",
- (unsigned)(offset + memregion.offset));
+ (unsigned)(offset+memregion.offset));
ioctl(fd, MEMSETBADBLOCK, &offset);
}
}
@@ -93,12 +94,12 @@ static ssize_t pwrite(int fd, const void *buf, size_t count, off_t offset)
* Param data: data to write on flash.
* Param rbuf: pointer to allocated buffer to copy readed data.
*/
-static int erase_and_write(off_t ofs, unsigned char *data, unsigned char *rbuf)
+static int erase_and_write(off_t ofs, off_t length,
+ unsigned char *data, unsigned char *rbuf)
{
struct erase_info_user er;
- int i, ret;
-
- printf("\r0x%08x: erasing... ", (unsigned)(ofs + memregion.offset));
+ unsigned int i;
+ int ret;
er.start = ofs;
er.length = meminfo.erasesize;
@@ -106,49 +107,55 @@ static int erase_and_write(off_t ofs, unsigned char *data, unsigned char *rbuf)
ret = erase(fd, er.length, er.start);
if (ret < 0) {
perror("erase");
- printf("Could't not erase flash at 0x%08x length 0x%08x.\n",
+ printf("\nCould't not erase flash at 0x%08x length 0x%08x.\n",
er.start, er.length);
return ret;
}
- printf("\r0x%08x: writing...", (unsigned)(ofs + memregion.offset));
+ for (i = 0; i < meminfo.erasesize;
+ i = i+meminfo.writesize) {
+ /* Write data to given offset */
+ pwrite(fd, data+i, meminfo.writesize, ofs+i);
- /* Write data to given offset */
- pwrite(fd, data, meminfo.erasesize, ofs);
+ /* Read data from offset */
+ pread(fd, rbuf+i, meminfo.writesize, ofs+i);
- printf("\r0x%08x: reading...", (unsigned)(ofs + memregion.offset));
+ ret = ioctl(fd, ECCGETSTATS, &newstats);
+ if (ret < 0) {
+ perror("ECCGETSTATS");
+ return ret;
+ }
- /* Read data from offset */
- pread(fd, rbuf, meminfo.erasesize, ofs);
+ if (newstats.corrected > oldstats.corrected) {
+ printf("\n %d bit(s) ECC corrected at 0x%08x\n",
+ newstats.corrected-oldstats.corrected,
+ (unsigned)(ofs+memregion.offset));
+
+ init_progression_bar(length);
+
+ if ((newstats.corrected-oldstats.corrected)
+ >= MAX_ECC_BITS) {
+ /* Increment ECC stats that
+ * are over MAX_ECC_BITS */
+ ecc_stats_over++;
+ } else {
+ /* Increment ECC stat value */
+ ecc_stats[(newstats.corrected-
+ oldstats.corrected)-1]++;
+ }
+ /* Set oldstats to newstats */
+ oldstats.corrected = newstats.corrected;
+ }
+ if (newstats.failed > oldstats.failed) {
+ printf("\nECC failed at 0x%08x\n",
+ (unsigned)(ofs+memregion.offset));
- ret = ioctl(fd, ECCGETSTATS, &newstats);
- if (ret < 0) {
- perror("ECCGETSTATS");
- return ret;
- }
+ init_progression_bar(length);
- if (newstats.corrected > oldstats.corrected) {
- printf("\n %d bit(s) ECC corrected at 0x%08x\n",
- newstats.corrected - oldstats.corrected,
- (unsigned)(ofs + memregion.offset));
- if ((newstats.corrected-oldstats.corrected) >= MAX_ECC_BITS) {
- /* Increment ECC stats that are over MAX_ECC_BITS */
- ecc_stats_over++;
- } else {
- /* Increment ECC stat value */
- ecc_stats[(newstats.corrected-oldstats.corrected)-1]++;
+ oldstats.failed = newstats.failed;
+ ecc_failed_cnt++;
}
- /* Set oldstats to newstats */
- oldstats.corrected = newstats.corrected;
}
- if (newstats.failed > oldstats.failed) {
- printf("\nECC failed at 0x%08x\n",
- (unsigned)(ofs + memregion.offset));
- oldstats.failed = newstats.failed;
- ecc_failed_cnt++;
- }
-
- printf("\r0x%08x: checking...", (unsigned)(ofs + memregion.offset));
/* Compared written data with read data.
* If data is not identical, display a detailed
@@ -161,6 +168,7 @@ static int erase_and_write(off_t ofs, unsigned char *data, unsigned char *rbuf)
printf("Byte 0x%x is %02x should be %02x\n",
i, rbuf[i], data[i]);
}
+
return ret;
}
return 0;
@@ -171,9 +179,9 @@ static void print_stats(int nr_passes, int length)
{
int i;
printf("-------- Summary --------\n");
- printf("Tested blocks : %d\n", (length/meminfo.erasesize)
+ printf("Tested Eraseblocks : %d\n", (length/meminfo.erasesize)
* nr_passes);
-
+ printf("ECC failures per Page:\n");
for (i = 0; i < MAX_ECC_BITS; i++)
printf("ECC %d bit error(s) : %d\n", i+1, ecc_stats[i]);
@@ -185,14 +193,12 @@ static void print_stats(int nr_passes, int length)
/* Main program. */
static int do_nandtest(int argc, char *argv[])
{
- int opt, length = -1, do_nandtest_dev = -1;
- off_t flash_offset = 0;
- off_t test_ofs;
- unsigned int nr_passes = 1, pass;
- int i;
- int ret = -1;
+ off_t flash_offset = 0, test_ofs, length = 0;
+ unsigned int nr_iterations = 1, iter;
unsigned char *wbuf, *rbuf;
+ int opt, do_nandtest_dev = -1, ret = -1;
+ /* Init global variables. */
ecc_failed_cnt = 0;
ecc_stats_over = 0;
markbad = 0;
@@ -200,7 +206,7 @@ static int do_nandtest(int argc, char *argv[])
memset(ecc_stats, 0, MAX_ECC_BITS);
- while ((opt = getopt(argc, argv, "ms:p:o:l:t")) > 0) {
+ while ((opt = getopt(argc, argv, "ms:i:o:l:t")) > 0) {
switch (opt) {
case 'm':
markbad = 1;
@@ -208,8 +214,8 @@ static int do_nandtest(int argc, char *argv[])
case 's':
seed = simple_strtoul(optarg, NULL, 0);
break;
- case 'p':
- nr_passes = simple_strtoul(optarg, NULL, 0);
+ case 'i':
+ nr_iterations = simple_strtoul(optarg, NULL, 0);
break;
case 'o':
flash_offset = simple_strtoul(optarg, NULL, 0);
@@ -225,7 +231,7 @@ static int do_nandtest(int argc, char *argv[])
}
}
- /* Check if no device is given */
+ /* Check if no device is given. */
if (optind >= argc)
return COMMAND_ERROR_USAGE;
@@ -243,7 +249,6 @@ static int do_nandtest(int argc, char *argv[])
}
/* Getting flash information. */
-
ret = ioctl(fd, MEMGETINFO, &meminfo);
if (ret < 0) {
perror("MEMGETINFO");
@@ -262,18 +267,25 @@ static int do_nandtest(int argc, char *argv[])
goto err;
}
- if (length == -1) {
+ if (!length) {
length = meminfo.size;
length -= flash_offset;
}
printf("Flash offset: 0x%08x\n",
(unsigned)(flash_offset+memregion.offset));
- printf("Length: 0x%08x\n", (unsigned)length);
- printf("End address: 0x%08x\n",
+ printf("Length: 0x%08x\n", (unsigned)length);
+ printf("End address: 0x%08x\n",
(unsigned)(flash_offset+length+memregion.offset));
- printf("Erasesize: 0x%08x\n", (unsigned)(meminfo.erasesize));
- printf("Starting nandtest...\n");
+ printf("Erasesize: 0x%08x\n", (unsigned)(meminfo.erasesize));
+ printf("Testing device...\n");
+
+ /* Check constraints */
+ if (meminfo.erasesize % meminfo.writesize) {
+ printf("Erasesize is not a multiple of writesize.\n"
+ "Please check driver implementation\n.");
+ goto err;
+ }
if (flash_offset % meminfo.erasesize) {
printf("Offset 0x%08x not multiple of erase size 0x%08x\n",
@@ -281,12 +293,12 @@ static int do_nandtest(int argc, char *argv[])
goto err;
}
if (length % meminfo.erasesize) {
- printf("Length 0x%08x not multiple of erase size 0x%08x\n",
+ printf("Length 0x%08lx not multiple of erase size 0x%08x\n",
length, meminfo.erasesize);
goto err;
}
- if (length + flash_offset > meminfo.size) {
- printf("Length 0x%08x + offset 0x%08x exceeds "
+ if (length+flash_offset > meminfo.size) {
+ printf("Length 0x%08lx + offset 0x%08x exceeds "
"device size 0x%08x\n",
length, (unsigned)flash_offset, meminfo.size);
goto err;
@@ -298,9 +310,12 @@ static int do_nandtest(int argc, char *argv[])
meminfo.erasesize * 2);
goto err;
}
- rbuf = wbuf + meminfo.erasesize;
- for (pass = 0; pass < nr_passes; pass++) {
+ rbuf = wbuf+meminfo.erasesize;
+
+ for (iter = 0; iter < nr_iterations; iter++) {
+ init_progression_bar(length);
+
for (test_ofs = flash_offset;
test_ofs < flash_offset+length;
test_ofs += meminfo.erasesize) {
@@ -309,23 +324,29 @@ static int do_nandtest(int argc, char *argv[])
seed = rand();
if (ioctl(fd, MEMGETBADBLOCK, &__test_ofs)) {
- printf("\rBad block at 0x%08x\n",
- (unsigned)(test_ofs +
+ printf("\nBad block at 0x%08x\n",
+ (unsigned)(test_ofs+
memregion.offset));
+ init_progression_bar(length);
continue;
}
- for (i = 0; i < meminfo.erasesize; i++)
- wbuf[i] = rand();
+ get_random_bytes(wbuf, meminfo.erasesize);
- ret = erase_and_write(test_ofs, wbuf, rbuf);
+ show_progress(test_ofs);
+
+ ret = erase_and_write(
+ test_ofs, length, wbuf, rbuf);
if (ret < 0)
goto err2;
}
- printf("\nFinished pass %d successfully\n", pass+1);
+
+ show_progress(test_ofs);
+ printf("\nFinished iteration %d successfully\n", iter+1);
}
- print_stats(nr_passes, length);
+ print_stats(nr_iterations,
+ length);
ret = close(fd);
if (ret < 0) {
@@ -350,7 +371,7 @@ static const __maybe_unused char cmd_nandtest_help[] =
" -t, Really do a nandtest on device.\n"
" -m, Mark blocks bad if they appear so.\n"
" -s <seed>, Supply random seed.\n"
- " -p <passes>, Number of passes.\n"
+ " -i <iterations>, Number of iterations.\n"
" -o <offset>, Start offset on flash.\n"
" -l <length>, Length of flash to test.\n";
--
1.7.12.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2012-10-20 7:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350717232-5685-1-git-send-email-alex.aring@gmail.com \
--to=alex.aring@googlemail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox