From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 6/8] pm9263: use w1 serial number to generate local mac address
Date: Sun, 28 Oct 2012 02:24:10 +0200 [thread overview]
Message-ID: <1351383852-8488-6-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1351383852-8488-1-git-send-email-plagnioj@jcrosoft.com>
The OUI will be 'ron' => 72:6F:6E
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boards/pm9263/init.c | 29 ++++++++++++++++++++---------
1 file changed, 20 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boards/pm9263/init.c b/arch/arm/boards/pm9263/init.c
index 1d13e03..7ba804a 100644
--- a/arch/arm/boards/pm9263/init.c
+++ b/arch/arm/boards/pm9263/init.c
@@ -37,6 +37,7 @@
#include <mach/at91sam9_smc.h>
#include <mach/sam9_smc.h>
#include <linux/w1-gpio.h>
+#include <w1_mac_address.h>
struct w1_gpio_platform_data w1_pdata = {
.pin = AT91_PIN_PB31,
@@ -93,6 +94,24 @@ static struct at91_ether_platform_data macb_pdata = {
.phy_addr = 0,
};
+static void pm9263_phy_init(void)
+{
+ /*
+ * PB27 enables the 50MHz oscillator for Ethernet PHY
+ * 1 - enable
+ * 0 - disable
+ */
+ at91_set_gpio_output(AT91_PIN_PB27, 1);
+ at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */
+}
+
+static void pm9263_add_device_eth(void)
+{
+ w1_mac_address_register(0, true, "ron", "w1-1-0");
+ pm9263_phy_init();
+ at91_add_device_eth(0, &macb_pdata);
+}
+
static int pm9263_mem_init(void)
{
at91_add_device_sdram(64 * 1024 * 1024);
@@ -106,16 +125,8 @@ static int pm9263_devices_init(void)
at91_set_gpio_input(w1_pdata.pin, 0);
add_generic_device_res("w1-gpio", DEVICE_ID_SINGLE, NULL, 0, &w1_pdata);
- /*
- * PB27 enables the 50MHz oscillator for Ethernet PHY
- * 1 - enable
- * 0 - disable
- */
- at91_set_gpio_output(AT91_PIN_PB27, 1);
- at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */
-
pm_add_device_nand();
- at91_add_device_eth(0, &macb_pdata);
+ pm9263_add_device_eth();
add_cfi_flash_device(0, AT91_CHIPSELECT_0, 4 * 1024 * 1024, 0);
devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self0");
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-10-28 0:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-28 0:21 [PATCH 0/8] pm9g45/pm9253/pm9261: add 1-wire support Jean-Christophe PLAGNIOL-VILLARD
2012-10-28 0:24 ` [PATCH 1/8] arm: at91: add gpio_is_valid support Jean-Christophe PLAGNIOL-VILLARD
2012-10-28 0:24 ` [PATCH 2/8] w1: introduce helper to generate mac address from 1-wire id Jean-Christophe PLAGNIOL-VILLARD
2012-10-29 8:33 ` Sascha Hauer
2012-10-29 11:29 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-28 0:24 ` [PATCH 3/8] pm9g45: add 1-wire support Jean-Christophe PLAGNIOL-VILLARD
2012-10-28 0:24 ` [PATCH 4/8] pm9g45: use w1 serial number to generate local mac address Jean-Christophe PLAGNIOL-VILLARD
2012-10-28 0:24 ` [PATCH 5/8] pm9263: add 1-wire support Jean-Christophe PLAGNIOL-VILLARD
2012-10-28 0:24 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-10-28 0:24 ` [PATCH 7/8] pm9261: " Jean-Christophe PLAGNIOL-VILLARD
2012-10-28 0:24 ` [PATCH 8/8] pm9261: use w1 serial number to generate local mac address Jean-Christophe PLAGNIOL-VILLARD
2012-10-29 13:40 [PATCH 0/8 v2:wqa] pm9g45/pm9253/pm9261: add 1-wire support Jean-Christophe PLAGNIOL-VILLARD
2012-10-29 13:46 ` [PATCH 1/8] arm: at91: add gpio_is_valid support Jean-Christophe PLAGNIOL-VILLARD
2012-10-29 13:47 ` [PATCH 6/8] pm9263: use w1 serial number to generate local mac address Jean-Christophe PLAGNIOL-VILLARD
2012-10-30 20:54 [PATCH 0/8 v3] pm9g45/pm9253/pm9261: add 1-wire support Jean-Christophe PLAGNIOL-VILLARD
2012-10-30 21:00 ` [PATCH 1/8] arm: at91: add gpio_is_valid support Jean-Christophe PLAGNIOL-VILLARD
2012-10-30 21:00 ` [PATCH 6/8] pm9263: use w1 serial number to generate local mac address Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351383852-8488-6-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox