[PATCH 0/7] at91 add i2c-gpio suport

[PATCH 0/7] at91 add i2c-gpio suport

[Jean-Christophe PLAGNIOL-VILLARD]

Hi,

	This paatch serie add the i2c suport to at91 using the i2c-gpio as teh
	IP is broken until the sam9x5. For the sam9x5 untill we have the hw
	driver support use the i2c-gpio too

	on the sam9x5ek enable the i2c and the qt1070

	This patch serie depends on i2c qt1070 patch and the at91sam9x5ek
	1-wire one

The following changes since commit 3a5609a37a19b0b6b5f4c61e3c561b7bf2d25b72:

  i2c: add versatile support (2012-11-01 06:58:21 +0800)

are available in the git repository at:

  git://git.jcrosoft.org/barebox.git delivery/at91_i2c

for you to fetch changes up to 2d2aee2451a0210cfb0d141db7729b648d0a32a4:

  at91sam9x5ek: add i2c support (2012-11-01 06:58:25 +0800)

----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (7):
      at91sam9x5: add i2c support
      at91rm9200: add i2c support
      at91sam9260/sam9g20: add i2c support
      at91sam9263: add i2c support
      at91sam9261/sam9g10: add i2c support
      at91sam9g45: add i2c support
      at91sam9x5ek: add i2c support

 arch/arm/boards/at91sam9x5ek/init.c      |   12 ++++++++++++
 arch/arm/configs/at91sam9x5ek_defconfig  |    5 ++++-
 arch/arm/mach-at91/at91rm9200_devices.c  |   28 ++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9260_devices.c |   32 ++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9261_devices.c |   31 +++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9263_devices.c |   31 +++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9g45_devices.c |   50 ++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9x5_devices.c  |   58 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/board.h  |    3 +++
 9 files changed, 249 insertions(+), 1 deletion(-)

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 1/7] at91sam9x5: add i2c support

[Jean-Christophe PLAGNIOL-VILLARD]

use i2c-gpio until we add the hw drivers

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91sam9x5_devices.c |   58 +++++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/board.h |    3 ++
 2 files changed, 61 insertions(+)

diff --git a/arch/arm/mach-at91/at91sam9x5_devices.c b/arch/arm/mach-at91/at91sam9x5_devices.c
index 26a380d..5a24325 100644
--- a/arch/arm/mach-at91/at91sam9x5_devices.c
+++ b/arch/arm/mach-at91/at91sam9x5_devices.c
@@ -19,6 +19,7 @@
 #include <mach/gpio.h>
 #include <mach/io.h>
 #include <mach/cpu.h>
+#include <i2c/i2c-gpio.h>
 
 #include "generic.h"
 
@@ -169,6 +170,63 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
+#if defined(CONFIG_I2C_GPIO)
+static struct i2c_gpio_platform_data pdata_i2c0 = {
+	.sda_pin		= AT91_PIN_PA30,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA31,
+	.scl_is_open_drain	= 1,
+	.udelay			= 5,		/* ~100 kHz */
+};
+
+static struct i2c_gpio_platform_data pdata_i2c1 = {
+	.sda_pin		= AT91_PIN_PC0,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PC1,
+	.scl_is_open_drain	= 1,
+	.udelay			= 5,		/* ~100 kHz */
+};
+
+static struct i2c_gpio_platform_data pdata_i2c2 = {
+	.sda_pin		= AT91_PIN_PB4,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PB5,
+	.scl_is_open_drain	= 1,
+	.udelay			= 5,		/* ~100 kHz */
+};
+
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	struct i2c_gpio_platform_data *pdata;
+
+	i2c_register_board_info(i2c_id, devices, nr_devices);
+
+	switch (i2c_id) {
+	case 0:
+		pdata = &pdata_i2c0;
+		break;
+	case 1:
+		pdata = &pdata_i2c1;
+		break;
+	case 2:
+		pdata = &pdata_i2c2;
+		break;
+	default:
+		return;
+	}
+
+	at91_set_GPIO_periph(pdata->sda_pin, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(pdata->sda_pin, 1);
+
+	at91_set_GPIO_periph(pdata->scl_pin, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(pdata->scl_pin, 1);
+
+	add_generic_device_res("i2c-gpio", i2c_id, NULL, 0, pdata);
+}
+#else
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
 /* --------------------------------------------------------------------
  *  UART
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 670c73d..1ce0762 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -21,6 +21,7 @@
 #include <mach/hardware.h>
 #include <sizes.h>
 #include <net.h>
+#include <i2c/i2c.h>
 #include <spi/spi.h>
 #include <linux/mtd/mtd.h>
 
@@ -71,6 +72,8 @@ struct at91_ether_platform_data {
 
 void at91_add_device_eth(int id, struct at91_ether_platform_data *data);
 
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
+
 /* SDRAM */
 void at91_add_device_sdram(u32 size);
 
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/7] at91rm9200: add i2c support

[Jean-Christophe PLAGNIOL-VILLARD]

use i2c-gpio as the hw ip is broken

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91rm9200_devices.c |   28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 8cb2f57..1a2d0fd 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -18,6 +18,7 @@
 #include <mach/gpio.h>
 #include <mach/io.h>
 #include <mach/at91rm9200_mc.h>
+#include <i2c/i2c-gpio.h>
 #include <sizes.h>
 
 #include "generic.h"
@@ -154,6 +155,33 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
+#if defined(CONFIG_I2C_GPIO)
+static struct i2c_gpio_platform_data pdata_i2c = {
+	.sda_pin		= AT91_PIN_PA25,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA26,
+	.scl_is_open_drain	= 1,
+	.udelay			= 5,		/* ~100 kHz */
+};
+
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	struct i2c_gpio_platform_data *pdata = &pdata_i2c;
+
+	i2c_register_board_info(0, devices, nr_devices);
+
+	at91_set_GPIO_periph(pdata->sda_pin, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(pdata->sda_pin, 1);
+
+	at91_set_GPIO_periph(pdata->scl_pin, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(pdata->scl_pin, 1);
+
+	add_generic_device_res("i2c-gpio", 0, NULL, 0, pdata);
+}
+#else
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
 /* --------------------------------------------------------------------
  *  SPI
  * -------------------------------------------------------------------- */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/7] at91sam9260/sam9g20: add i2c support

[Jean-Christophe PLAGNIOL-VILLARD]

use i2c-gpio as the hw ip is broken

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91sam9260_devices.c |   32 ++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 9c9534e..7450ec1 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -20,6 +20,7 @@
 #include <mach/gpio.h>
 #include <mach/io.h>
 #include <mach/cpu.h>
+#include <i2c/i2c-gpio.h>
 
 #include "generic.h"
 
@@ -155,6 +156,37 @@ void at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 /* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_GPIO)
+static struct i2c_gpio_platform_data pdata_i2c = {
+	.sda_pin		= AT91_PIN_PA23,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA24,
+	.scl_is_open_drain	= 1,
+	.udelay			= 5,		/* ~100 kHz */
+};
+
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	struct i2c_gpio_platform_data *pdata = &pdata_i2c;
+
+	i2c_register_board_info(0, devices, nr_devices);
+
+	at91_set_GPIO_periph(pdata->sda_pin, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(pdata->sda_pin, 1);
+
+	at91_set_GPIO_periph(pdata->scl_pin, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(pdata->scl_pin, 1);
+
+	add_generic_device_res("i2c-gpio", 0, NULL, 0, pdata);
+}
+#else
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+/* --------------------------------------------------------------------
  *  SPI
  * -------------------------------------------------------------------- */
 
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 4/7] at91sam9263: add i2c support

[Jean-Christophe PLAGNIOL-VILLARD]

use i2c-gpio as the hw ip is broken

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91sam9263_devices.c |   31 ++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index e686480..deffc27 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -19,6 +19,7 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/io.h>
+#include <i2c/i2c-gpio.h>
 
 #include "generic.h"
 
@@ -157,6 +158,36 @@ void at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 /* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_I2C_GPIO)
+static struct i2c_gpio_platform_data pdata_i2c = {
+	.sda_pin		= AT91_PIN_PB4,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PB5,
+	.scl_is_open_drain	= 1,
+	.udelay			= 5,		/* ~100 kHz */
+};
+
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	struct i2c_gpio_platform_data *pdata = &pdata_i2c;
+
+	i2c_register_board_info(0, devices, nr_devices);
+
+	at91_set_GPIO_periph(pdata->sda_pin, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(pdata->sda_pin, 1);
+
+	at91_set_GPIO_periph(pdata->scl_pin, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(pdata->scl_pin, 1);
+
+	add_generic_device_res("i2c-gpio", 0, NULL, 0, pdata);
+}
+#else
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+/* --------------------------------------------------------------------
  *  SPI
  * -------------------------------------------------------------------- */
 
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 5/7] at91sam9261/sam9g10: add i2c support

[Jean-Christophe PLAGNIOL-VILLARD]

use i2c-gpio as the hw ip is broken

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91sam9261_devices.c |   31 ++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 0091e2d..68d75c3 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -20,6 +20,7 @@
 #include <mach/gpio.h>
 #include <mach/io.h>
 #include <mach/cpu.h>
+#include <i2c/i2c-gpio.h>
 
 #include "generic.h"
 
@@ -107,6 +108,36 @@ void at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 /* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_I2C_GPIO)
+static struct i2c_gpio_platform_data pdata_i2c = {
+	.sda_pin		= AT91_PIN_PA7,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA8,
+	.scl_is_open_drain	= 1,
+	.udelay			= 5,		/* ~100 kHz */
+};
+
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	struct i2c_gpio_platform_data *pdata = &pdata_i2c;
+
+	i2c_register_board_info(0, devices, nr_devices);
+
+	at91_set_GPIO_periph(pdata->sda_pin, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(pdata->sda_pin, 1);
+
+	at91_set_GPIO_periph(pdata->scl_pin, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(pdata->scl_pin, 1);
+
+	add_generic_device_res("i2c-gpio", 0, NULL, 0, pdata);
+}
+#else
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+/* --------------------------------------------------------------------
  *  SPI
  * -------------------------------------------------------------------- */
 
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 6/7] at91sam9g45: add i2c support

[Jean-Christophe PLAGNIOL-VILLARD]

use i2c-gpio as the hw ip is broken

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91sam9g45_devices.c |   50 ++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 22b455e..35cd2e7 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -18,6 +18,7 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/io.h>
+#include <i2c/i2c-gpio.h>
 
 #include "generic.h"
 
@@ -132,6 +133,55 @@ void at91_add_device_nand(struct atmel_nand_data *data)
 void at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+static struct i2c_gpio_platform_data pdata_i2c0 = {
+	.sda_pin		= AT91_PIN_PA20,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA21,
+	.scl_is_open_drain	= 1,
+	.udelay			= 5,		/* ~100 kHz */
+};
+
+static struct i2c_gpio_platform_data pdata_i2c1 = {
+	.sda_pin		= AT91_PIN_PB10,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PB11,
+	.scl_is_open_drain	= 1,
+	.udelay			= 5,		/* ~100 kHz */
+};
+
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	struct i2c_gpio_platform_data *pdata = &pdata_i2c;
+
+	i2c_register_board_info(i2c_id, devices, nr_devices);
+
+	switch (i2c_id) {
+	case 0;
+		pdata = &pdata_i2c0;
+		break;
+	case 1;
+		pdata = &pdata_i2c1;
+		break;
+	default:
+		return;
+	}
+
+	at91_set_GPIO_periph(pdata->sda_pin, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(pdata->sda_pin, 1);
+
+	at91_set_GPIO_periph(pdata->scl_pin, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(pdata->scl_pin, 1);
+
+	add_generic_device_res("i2c-gpio", i2c_id, NULL, 0, pdata);
+}
+#else
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
 resource_size_t __init at91_configure_dbgu(void)
 {
 	at91_set_A_periph(AT91_PIN_PB12, 0);		/* DRXD */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 7/7] at91sam9x5ek: add i2c support

[Jean-Christophe PLAGNIOL-VILLARD]

enable qt1070 support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/at91sam9x5ek/init.c     |   12 ++++++++++++
 arch/arm/configs/at91sam9x5ek_defconfig |    5 ++++-
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boards/at91sam9x5ek/init.c b/arch/arm/boards/at91sam9x5ek/init.c
index 78f7349..48eebac 100644
--- a/arch/arm/boards/at91sam9x5ek/init.c
+++ b/arch/arm/boards/at91sam9x5ek/init.c
@@ -114,6 +114,17 @@ static void ek_add_device_eth(void)
 	at91_add_device_eth(0, &macb_pdata);
 }
 
+static struct i2c_board_info i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("qt1070", 0x1b),
+	},
+};
+
+static void ek_add_device_i2c(void)
+{
+	at91_add_device_i2c(0, i2c_devices, ARRAY_SIZE(i2c_devices));
+}
+
 /*
  * USB Host port
  */
@@ -172,6 +183,7 @@ static int at91sam9x5ek_devices_init(void)
 	ek_add_device_eth();
 	at91_add_device_usbh_ohci(&ek_usbh_data);
 	ek_add_led();
+	ek_add_device_i2c();
 
 	armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
 	armlinux_set_architecture(CONFIG_MACH_AT91SAM9X5EK);
diff --git a/arch/arm/configs/at91sam9x5ek_defconfig b/arch/arm/configs/at91sam9x5ek_defconfig
index 6315d9f..3e66c44 100644
--- a/arch/arm/configs/at91sam9x5ek_defconfig
+++ b/arch/arm/configs/at91sam9x5ek_defconfig
@@ -41,6 +41,7 @@ CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_LED=y
 CONFIG_CMD_LED_TRIGGER=y
 CONFIG_NET=y
@@ -52,6 +53,8 @@ CONFIG_FS_TFTP=y
 CONFIG_NET_NETCONSOLE=y
 CONFIG_DRIVER_NET_MACB=y
 # CONFIG_SPI is not set
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
 CONFIG_MTD=y
 CONFIG_NAND=y
 # CONFIG_NAND_ECC_HW is not set
@@ -64,7 +67,7 @@ CONFIG_DISK_WRITE=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_LED_TRIGGERS=y
-CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_QT1070=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_GPIO=y
 CONFIG_W1_SLAVE_DS2431=y
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 1/1 v2] at91sam9x5ek: add i2c support

[Jean-Christophe PLAGNIOL-VILLARD]

enable the qt1070 for debug only as this slow down barebox a lot
as we need to read the i2c via poller

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
HI

branch updated

The following changes since commit 3a5609a37a19b0b6b5f4c61e3c561b7bf2d25b72:

  i2c: add versatile support (2012-11-01 06:58:21 +0800)

are available in the git repository at:

  git://git.jcrosoft.org/barebox.git delivery/at91_i2c

for you to fetch changes up to 3c67dcab6fc9b1ab0966b2693f2952209f18cdda:

  at91sam9x5ek: add i2c support (2012-11-01 11:26:25 +0800)

Jean-Christophe PLAGNIOL-VILLARD (7):
      at91sam9x5: add i2c support
      at91rm9200: add i2c support
      at91sam9260/sam9g20: add i2c support
      at91sam9263: add i2c support
      at91sam9261/sam9g10: add i2c support
      at91sam9g45: add i2c support
      at91sam9x5ek: add i2c support

 arch/arm/boards/at91sam9x5ek/init.c      |   12 ++++++++++++
 arch/arm/configs/at91sam9x5ek_defconfig  |    3 +++
 arch/arm/mach-at91/at91rm9200_devices.c  |   28 ++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9260_devices.c |   32 ++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9261_devices.c |   31 +++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9263_devices.c |   31 +++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9g45_devices.c |   50 ++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9x5_devices.c  |   58 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/board.h  |    3 +++
 9 files changed, 248 insertions(+)

Best Regards,
J.
 arch/arm/configs/at91sam9x5ek_defconfig |    3 +++
 2 files changed, 15 insertions(+)

diff --git a/arch/arm/boards/at91sam9x5ek/init.c b/arch/arm/boards/at91sam9x5ek/init.c
index 78f7349..48eebac 100644
--- a/arch/arm/boards/at91sam9x5ek/init.c
+++ b/arch/arm/boards/at91sam9x5ek/init.c
@@ -114,6 +114,17 @@ static void ek_add_device_eth(void)
 	at91_add_device_eth(0, &macb_pdata);
 }
 
+static struct i2c_board_info i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("qt1070", 0x1b),
+	},
+};
+
+static void ek_add_device_i2c(void)
+{
+	at91_add_device_i2c(0, i2c_devices, ARRAY_SIZE(i2c_devices));
+}
+
 /*
  * USB Host port
  */
@@ -172,6 +183,7 @@ static int at91sam9x5ek_devices_init(void)
 	ek_add_device_eth();
 	at91_add_device_usbh_ohci(&ek_usbh_data);
 	ek_add_led();
+	ek_add_device_i2c();
 
 	armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
 	armlinux_set_architecture(CONFIG_MACH_AT91SAM9X5EK);
diff --git a/arch/arm/configs/at91sam9x5ek_defconfig b/arch/arm/configs/at91sam9x5ek_defconfig
index 6315d9f..c71fe0d 100644
--- a/arch/arm/configs/at91sam9x5ek_defconfig
+++ b/arch/arm/configs/at91sam9x5ek_defconfig
@@ -41,6 +41,7 @@ CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_LED=y
 CONFIG_CMD_LED_TRIGGER=y
 CONFIG_NET=y
@@ -52,6 +53,8 @@ CONFIG_FS_TFTP=y
 CONFIG_NET_NETCONSOLE=y
 CONFIG_DRIVER_NET_MACB=y
 # CONFIG_SPI is not set
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
 CONFIG_MTD=y
 CONFIG_NAND=y
 # CONFIG_NAND_ECC_HW is not set
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 0/7] at91 add i2c-gpio suport

[Jean-Christophe PLAGNIOL-VILLARD]

On 15:33 Thu 01 Nov     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> Hi,
> 
> 	This paatch serie add the i2c suport to at91 using the i2c-gpio as teh
> 	IP is broken until the sam9x5. For the sam9x5 untill we have the hw
> 	driver support use the i2c-gpio too
> 
> 	on the sam9x5ek enable the i2c and the qt1070
> 
> 	This patch serie depends on i2c qt1070 patch and the at91sam9x5ek
> 	1-wire one
> 
v2 rebase on i2c v2 patch series

The following changes since commit d3298969a9fcc5d95c2c4f8a39c1d4aa21780009:

  i2c: add versatile support (2012-11-02 02:24:49 +0800)

are available in the git repository at:

  git://git.jcrosoft.org/barebox.git delivery/at91_i2c

for you to fetch changes up to 972103b8b146974e4d1ed6a5912f6b0172c40d02:

  at91sam9x5ek: add i2c support (2012-11-02 02:24:59 +0800)

----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (7):
      at91sam9x5: add i2c support
      at91rm9200: add i2c support
      at91sam9260/sam9g20: add i2c support
      at91sam9263: add i2c support
      at91sam9261/sam9g10: add i2c support
      at91sam9g45: add i2c support
      at91sam9x5ek: add i2c support

 arch/arm/boards/at91sam9x5ek/init.c      |   12 ++++++++++++
 arch/arm/configs/at91sam9x5ek_defconfig  |    3 +++
 arch/arm/mach-at91/at91rm9200_devices.c  |   28 ++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9260_devices.c |   32 ++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9261_devices.c |   31 +++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9263_devices.c |   31 +++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9g45_devices.c |   50 ++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9x5_devices.c  |   58 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/board.h  |    3 +++
 9 files changed, 248 insertions(+)

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 0/7] at91 add i2c-gpio suport

[Sascha Hauer]

On Thu, Nov 01, 2012 at 03:33:52PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Hi,
> 
> 	This paatch serie add the i2c suport to at91 using the i2c-gpio as teh
> 	IP is broken until the sam9x5. For the sam9x5 untill we have the hw
> 	driver support use the i2c-gpio too
> 
> 	on the sam9x5ek enable the i2c and the qt1070
> 
> 	This patch serie depends on i2c qt1070 patch and the at91sam9x5ek
> 	1-wire one
> 
> The following changes since commit 3a5609a37a19b0b6b5f4c61e3c561b7bf2d25b72:
> 
>   i2c: add versatile support (2012-11-01 06:58:21 +0800)
> 
> are available in the git repository at:
> 
>   git://git.jcrosoft.org/barebox.git delivery/at91_i2c
> 
> for you to fetch changes up to 2d2aee2451a0210cfb0d141db7729b648d0a32a4:

Applied up to 6/7 as the qt1070 driver needs some updates.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 0/7] at91 add i2c-gpio suport

[Jean-Christophe PLAGNIOL-VILLARD]

On 21:24 Fri 02 Nov     , Sascha Hauer wrote:
> On Thu, Nov 01, 2012 at 03:33:52PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > Hi,
> > 
> > 	This paatch serie add the i2c suport to at91 using the i2c-gpio as teh
> > 	IP is broken until the sam9x5. For the sam9x5 untill we have the hw
> > 	driver support use the i2c-gpio too
> > 
> > 	on the sam9x5ek enable the i2c and the qt1070
> > 
> > 	This patch serie depends on i2c qt1070 patch and the at91sam9x5ek
> > 	1-wire one
> > 
> > The following changes since commit 3a5609a37a19b0b6b5f4c61e3c561b7bf2d25b72:
> > 
> >   i2c: add versatile support (2012-11-01 06:58:21 +0800)
> > 
> > are available in the git repository at:
> > 
> >   git://git.jcrosoft.org/barebox.git delivery/at91_i2c
> > 
> > for you to fetch changes up to 2d2aee2451a0210cfb0d141db7729b648d0a32a4:
> 
> Applied up to 6/7 as the qt1070 driver needs some updates.
You apply it too as the qt1070 is not in the defconfig

this will not break anything

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 1/1 v3] at91sam9x5ek: add i2c support

[Jean-Christophe PLAGNIOL-VILLARD]

enable qt1070 support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
v3:

	provide irq_pin for qt1070
	and enable it by default

	branch updated

The following changes since commit 220c2476bc88b8297607ca0a3f8e2e3495da6edb:

  i2c: add versatile support (2012-11-03 04:09:17 +0800)

are available in the git repository at:

  git://git.jcrosoft.org/barebox.git delivery/at91_i2c

for you to fetch changes up to 5824ffb7201d38315a24fa4ba21124ffaf86068f:

  at91sam9x5ek: add i2c support (2012-11-03 04:09:55 +0800)

----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (7):
      at91sam9x5: add i2c support
      at91rm9200: add i2c support
      at91sam9260/sam9g20: add i2c support
      at91sam9263: add i2c support
      at91sam9261/sam9g10: add i2c support
      at91sam9g45: add i2c support
      at91sam9x5ek: add i2c support

 arch/arm/boards/at91sam9x5ek/init.c      |   21 ++++++++++++++++++++-
 arch/arm/configs/at91sam9x5ek_defconfig  |    5 ++++-
 arch/arm/mach-at91/at91rm9200_devices.c  |   28 ++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9260_devices.c |   32 ++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9261_devices.c |   31 +++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9263_devices.c |   31 +++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9g45_devices.c |   50 ++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9x5_devices.c  |   58 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/board.h  |    3 +++
 9 files changed, 257 insertions(+), 2 deletions(-)

Best Regards,
J.
 arch/arm/boards/at91sam9x5ek/init.c     |   21 ++++++++++++++++++++-
 arch/arm/configs/at91sam9x5ek_defconfig |    5 ++++-
 2 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boards/at91sam9x5ek/init.c b/arch/arm/boards/at91sam9x5ek/init.c
index 78f7349..dbb9bb5 100644
--- a/arch/arm/boards/at91sam9x5ek/init.c
+++ b/arch/arm/boards/at91sam9x5ek/init.c
@@ -37,7 +37,7 @@
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
 #include <mach/at91sam9x5_matrix.h>
-#include <gpio_keys.h>
+#include <input/qt1070.h>
 #include <readkey.h>
 #include <linux/w1-gpio.h>
 #include <w1_mac_address.h>
@@ -114,6 +114,24 @@ static void ek_add_device_eth(void)
 	at91_add_device_eth(0, &macb_pdata);
 }
 
+struct qt1070_platform_data qt1070_pdata = {
+	.irq_pin	= AT91_PIN_PA7,
+};
+
+static struct i2c_board_info i2c_devices[] = {
+	{
+		.platform_data = &qt1070_pdata,
+		I2C_BOARD_INFO("qt1070", 0x1b),
+	},
+};
+
+static void ek_add_device_i2c(void)
+{
+	at91_set_gpio_input(qt1070_pdata.irq_pin, 0);
+	at91_set_deglitch(qt1070_pdata.irq_pin, 1);
+	at91_add_device_i2c(0, i2c_devices, ARRAY_SIZE(i2c_devices));
+}
+
 /*
  * USB Host port
  */
@@ -172,6 +190,7 @@ static int at91sam9x5ek_devices_init(void)
 	ek_add_device_eth();
 	at91_add_device_usbh_ohci(&ek_usbh_data);
 	ek_add_led();
+	ek_add_device_i2c();
 
 	armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
 	armlinux_set_architecture(CONFIG_MACH_AT91SAM9X5EK);
diff --git a/arch/arm/configs/at91sam9x5ek_defconfig b/arch/arm/configs/at91sam9x5ek_defconfig
index 6315d9f..3e66c44 100644
--- a/arch/arm/configs/at91sam9x5ek_defconfig
+++ b/arch/arm/configs/at91sam9x5ek_defconfig
@@ -41,6 +41,7 @@ CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_LED=y
 CONFIG_CMD_LED_TRIGGER=y
 CONFIG_NET=y
@@ -52,6 +53,8 @@ CONFIG_FS_TFTP=y
 CONFIG_NET_NETCONSOLE=y
 CONFIG_DRIVER_NET_MACB=y
 # CONFIG_SPI is not set
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
 CONFIG_MTD=y
 CONFIG_NAND=y
 # CONFIG_NAND_ECC_HW is not set
@@ -64,7 +67,7 @@ CONFIG_DISK_WRITE=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_LED_TRIGGERS=y
-CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_QT1070=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_GPIO=y
 CONFIG_W1_SLAVE_DS2431=y
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox