[PATCH 2/7] at91rm9200: add i2c support

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

use i2c-gpio as the hw ip is broken

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91rm9200_devices.c |   28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 8cb2f57..1a2d0fd 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -18,6 +18,7 @@
 #include <mach/gpio.h>
 #include <mach/io.h>
 #include <mach/at91rm9200_mc.h>
+#include <i2c/i2c-gpio.h>
 #include <sizes.h>
 
 #include "generic.h"
@@ -154,6 +155,33 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
+#if defined(CONFIG_I2C_GPIO)
+static struct i2c_gpio_platform_data pdata_i2c = {
+	.sda_pin		= AT91_PIN_PA25,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA26,
+	.scl_is_open_drain	= 1,
+	.udelay			= 5,		/* ~100 kHz */
+};
+
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	struct i2c_gpio_platform_data *pdata = &pdata_i2c;
+
+	i2c_register_board_info(0, devices, nr_devices);
+
+	at91_set_GPIO_periph(pdata->sda_pin, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(pdata->sda_pin, 1);
+
+	at91_set_GPIO_periph(pdata->scl_pin, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(pdata->scl_pin, 1);
+
+	add_generic_device_res("i2c-gpio", 0, NULL, 0, pdata);
+}
+#else
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
 /* --------------------------------------------------------------------
  *  SPI
  * -------------------------------------------------------------------- */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox