From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/1] at91rm9200ek: enable dt support
Date: Sun, 4 Nov 2012 19:51:32 +0100 [thread overview]
Message-ID: <1352055092-21128-1-git-send-email-plagnioj@jcrosoft.com> (raw)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boards/at91rm9200ek/env/config | 2 ++
arch/arm/configs/at91rm9200ek_defconfig | 5 +++++
2 files changed, 7 insertions(+)
diff --git a/arch/arm/boards/at91rm9200ek/env/config b/arch/arm/boards/at91rm9200ek/env/config
index a3830cb..76c180b 100644
--- a/arch/arm/boards/at91rm9200ek/env/config
+++ b/arch/arm/boards/at91rm9200ek/env/config
@@ -15,6 +15,8 @@ global.dhcp.vendor_id=barebox-at91rm9200ek
kernel_loc=nfs
# can be either 'net', 'nor' or 'initrd'
rootfs_loc=net
+# can be either 'nfs', 'tftp', or empty
+oftree_loc=nfs
# can be either 'jffs2' or 'ubifs'
rootfs_type=ubifs
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 6a105c6..2bcade9 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -32,9 +32,14 @@ CONFIG_CMD_FLASH=y
CONFIG_CMD_BOOTM_ZLIB=y
CONFIG_CMD_BOOTM_BZLIB=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+# CONFIG_CMD_BOOTU is not set
CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_GPIO=y
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-11-04 18:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-04 18:51 Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-11-12 7:33 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352055092-21128-1-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox