[PATCH 1/1] phy: phy_update_status wait auto neg done when enabled

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

if the autoneg was start by the hw wait it to be finished

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/net/phy/phy.c |   26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 0c2e602..43738c2 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -28,6 +28,25 @@
 #define PHY_AN_TIMEOUT	10
 
 static int genphy_config_init(struct phy_device *phydev);
+static int phy_aneg_done(struct phy_device *phydev);
+
+static int phy_wait_aneg_read_status(struct phy_device *dev, struct phy_driver *drv)
+{
+	int ret;
+
+	if (AUTONEG_ENABLE != dev->autoneg)
+		return 0;
+
+	ret = phy_aneg_done(dev);
+	if (ret)
+		return ret;
+
+	/*
+	 * re-read the status as the aneg may not be finished
+	 * when we read it the first time
+	 */
+	return drv->read_status(dev);
+}
 
 int phy_update_status(struct phy_device *dev)
 {
@@ -35,11 +54,18 @@ int phy_update_status(struct phy_device *dev)
 	struct eth_device *edev = dev->attached_dev;
 	int ret;
 	int oldspeed = dev->speed, oldduplex = dev->duplex;
+	int old_link = dev->link;
 
 	ret = drv->read_status(dev);
 	if (ret)
 		return ret;
 
+	if (dev->link && !old_link) {
+		ret = phy_wait_aneg_read_status(dev, drv);
+		if (ret)
+			return ret;
+	}
+
 	if (dev->speed == oldspeed && dev->duplex == oldduplex)
 		return 0;
 
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox