mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/1] led-gpio: add bicolor led support
Date: Fri, 16 Nov 2012 21:17:23 +0100	[thread overview]
Message-ID: <1353097043-31250-1-git-send-email-plagnioj@jcrosoft.com> (raw)

those led can have 2 colors but one at a time otherwise they are black

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/led/Kconfig    |    4 ++++
 drivers/led/led-gpio.c |   47 +++++++++++++++++++++++++++++++++++++++++++++++
 include/led.h          |   20 ++++++++++++++++++++
 3 files changed, 71 insertions(+)

diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
index 106093b..8ca6ab8 100644
--- a/drivers/led/Kconfig
+++ b/drivers/led/Kconfig
@@ -11,6 +11,10 @@ config LED_GPIO_RGB
 	bool "gpio rgb LED support"
 	depends on LED_GPIO
 
+config LED_GPIO_BICOLOR
+	bool "gpio bicolor LED support"
+	depends on LED_GPIO
+
 config LED_TRIGGERS
 	select POLLER
 	bool "LED triggers support"
diff --git a/drivers/led/led-gpio.c b/drivers/led/led-gpio.c
index 711146b..c78ef9e 100644
--- a/drivers/led/led-gpio.c
+++ b/drivers/led/led-gpio.c
@@ -52,6 +52,53 @@ void led_gpio_unregister(struct gpio_led *led)
 	led_unregister(&led->led);
 }
 
+#ifdef CONFIG_LED_GPIO_BICOLOR
+static void led_gpio_bicolor_set(struct led *led, unsigned int value)
+{
+	struct gpio_bicolor_led *bi = container_of(led, struct gpio_bicolor_led, led);
+	int al = bi->active_low;
+
+	switch (value) {
+	case 0:
+		gpio_direction_output(bi->gpio_c0, al);
+		gpio_direction_output(bi->gpio_c1, al);
+		break;
+	case 1:
+		gpio_direction_output(bi->gpio_c0, !al);
+		gpio_direction_output(bi->gpio_c1, al);
+		break;
+	case 2:
+		gpio_direction_output(bi->gpio_c0, al);
+		gpio_direction_output(bi->gpio_c1, !al);
+		break;
+	}
+}
+
+/**
+ * led_gpio_bicolor_register - register three gpios as a bicolor LED
+ * @param led	The gpio bicolor LED
+ *
+ * This function registers three gpios as a bicolor LED. led->gpio[rg]
+ * should be initialized to the gpios to control.
+ */
+int led_gpio_bicolor_register(struct gpio_bicolor_led *led)
+{
+	led->led.set = led_gpio_bicolor_set;
+	led->led.max_value = 2;
+
+	return led_register(&led->led);
+}
+
+/**
+ * led_gpio_bicolor_unregister - remove a gpio controlled bicolor LED from the framework
+ * @param led	The gpio LED
+ */
+void led_gpio_bicolor_unregister(struct gpio_bicolor_led *led)
+{
+	led_unregister(&led->led);
+}
+#endif
+
 #ifdef CONFIG_LED_GPIO_RGB
 
 static void led_gpio_rgb_set(struct led *led, unsigned int value)
diff --git a/include/led.h b/include/led.h
index 9ec1f0d..dd551fe 100644
--- a/include/led.h
+++ b/include/led.h
@@ -65,6 +65,12 @@ struct gpio_led {
 	struct led led;
 };
 
+struct gpio_bicolor_led {
+	int gpio_c0, gpio_c1;
+	bool active_low;
+	struct led led;
+};
+
 struct gpio_rgb_led {
 	int gpio_r, gpio_g, gpio_b;
 	bool active_low;
@@ -85,6 +91,20 @@ static inline void led_gpio_unregister(struct gpio_led *led)
 }
 #endif
 
+#ifdef CONFIG_LED_GPIO_BICOLOR
+int led_gpio_bicolor_register(struct gpio_bicolor_led *led);
+void led_gpio_bicolor_unregister(struct gpio_bicolor_led *led);
+#else
+static inline int led_gpio_bicolor_register(struct gpio_bicolor_led *led)
+{
+	return -ENOSYS;
+}
+
+static inline void led_gpio_bicolor_unregister(struct gpio_bicolor_led *led)
+{
+}
+#endif
+
 #ifdef CONFIG_LED_GPIO_RGB
 int led_gpio_rgb_register(struct gpio_rgb_led *led);
 void led_gpio_rgb_unregister(struct gpio_led *led);
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2012-11-16 20:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-16 20:17 Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-11-19 10:26 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1353097043-31250-1-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox