From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp29.i.mail.ru ([94.100.177.89]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1TcKr8-0004q7-A2 for barebox@lists.infradead.org; Sat, 24 Nov 2012 18:53:37 +0000 From: Alexander Shiyan Date: Sat, 24 Nov 2012 22:53:29 +0400 Message-Id: <1353783209-16451-1-git-send-email-shc_work@mail.ru> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH] Cleanup Kconfig files To: barebox@lists.infradead.org This patch provides a global cleanup barebox Kconfig files. This includes replacing spaces to tabs, formatting in accordance format, removing extraneous lines and spaces. No functional changes. Signed-off-by: Alexander Shiyan --- arch/arm/Kconfig | 6 ++-- arch/arm/cpu/Kconfig | 7 ++-- arch/arm/mach-at91/Kconfig | 4 +- arch/arm/mach-imx/Kconfig | 8 ++-- arch/arm/mach-mxs/Kconfig | 6 ++-- arch/arm/mach-omap/Kconfig | 39 ++++++++++++---------- arch/arm/mach-samsung/Kconfig | 16 ++++----- arch/blackfin/Kconfig | 2 +- arch/mips/Kconfig | 25 +++++++------- arch/nios2/Kconfig | 5 +-- arch/openrisc/Kconfig | 2 +- arch/ppc/mach-mpc85xx/Kconfig | 2 +- arch/x86/Kconfig | 29 +++++++--------- arch/x86/boot/Kconfig | 2 +- arch/x86/mach-i386/Kconfig | 2 +- commands/Kconfig | 31 ++++++++--------- common/Kconfig | 73 +++++++++++++++++++++-------------------- crypto/Kconfig | 2 +- drivers/Kconfig | 2 +- drivers/ata/Kconfig | 2 +- drivers/dma/Kconfig | 2 +- drivers/eeprom/Kconfig | 6 ++-- drivers/gpio/Kconfig | 2 +- drivers/i2c/Kconfig | 2 +- drivers/input/Kconfig | 4 +- drivers/mci/Kconfig | 4 +- drivers/misc/Kconfig | 2 +- drivers/mtd/Kconfig | 2 +- drivers/mtd/devices/Kconfig | 8 ++-- drivers/mtd/nand/Kconfig | 8 ++-- drivers/mtd/ubi/Kconfig | 2 +- drivers/net/Kconfig | 2 +- drivers/net/phy/Kconfig | 2 +- drivers/nor/Kconfig | 6 ++-- drivers/serial/Kconfig | 4 +- drivers/spi/Kconfig | 2 +- drivers/usb/Kconfig | 2 +- drivers/usb/gadget/Kconfig | 2 +- drivers/video/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- fs/Kconfig | 2 +- lib/Kconfig | 6 ++-- lib/gui/Kconfig | 2 +- net/Kconfig | 2 +- 44 files changed, 169 insertions(+), 174 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3afd885..01fe9de 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -19,7 +19,7 @@ config ARM_LINUX config HAVE_MACH_ARM_HEAD bool -menu "System Type " +menu "System Type" choice prompt "ARM system type" @@ -71,7 +71,7 @@ config ARCH_NOMADIK select CPU_ARM926T select CLOCKSOURCE_NOMADIK help - Support for the Nomadik platform by ST-Ericsson + Support for the Nomadik platform by ST-Ericsson config ARCH_OMAP bool "TI OMAP" @@ -153,7 +153,7 @@ config THUMB2_BAREBOX endmenu -menu "Arm specific settings " +menu "Arm specific settings" config CMD_ARM_CPUINFO bool "cpuinfo command" diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig index d8a5fb1..86bc174 100644 --- a/arch/arm/cpu/Kconfig +++ b/arch/arm/cpu/Kconfig @@ -4,7 +4,7 @@ config CPU_32 bool default y -# Select CPU types depending on the architecture selected. This selects +# Select CPU types depending on the architecture selected. This selects # which CPUs we support in the kernel image, and the compiler instruction # optimiser behaviour. @@ -27,14 +27,13 @@ config CPU_ARM920T Say Y if you want support for the ARM920T processor. Otherwise, say N. - # ARM926T config CPU_ARM926T bool select CPU_32v5 help - This is a variant of the ARM920. It has slightly different - instruction sequences for cache and TLB operations. Curiously, + This is a variant of the ARM920. It has slightly different + instruction sequences for cache and TLB operations. Curiously, there is no documentation on it at the ARM corporate website. Say Y if you want support for the ARM926T processor. diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 3a985f7..b01d84b 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -121,8 +121,8 @@ choice config MACH_AT91RM9200EK bool "Atmel AT91RM9200-EK Evaluation Kit" - help select HAVE_AT91_DATAFLASH_CARD + help Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. @@ -390,7 +390,7 @@ config CALAO_MOB_TNY_MD2 depends on SUPPORT_CALAO_MOB_TNY_MD2 config CALAO_MB_QIL_A9260 - bool "MB-QIL A9260 Motherboard Board support" + bool "MB-QIL A9260 Motherboard Board support" depends on MACH_QIL_A9260 endif diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3f4b452..11d2767 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -500,7 +500,7 @@ endif # ---------------------------------------------------------- -menu "Board specific settings " +menu "Board specific settings" if MACH_PCM037 choice @@ -561,13 +561,13 @@ endchoice endif endmenu -menu "i.MX specific settings " +menu "i.MX specific settings" config IMX_IIM tristate "IIM fusebox device" depends on !ARCH_IMX21 && !ARCH_IMX21 help - Device driver for the IC Identification Module (IIM) fusebox. Use the + Device driver for the IC Identification Module (IIM) fusebox. Use the regular md/mw commands to program and read the fusebox. Fuses are grouped in "rows", 8 bits per row. When using md/mw commands, @@ -588,7 +588,7 @@ config IMX_IIM_FUSE_BLOW Before being actually able to blow the fuses, you need to explicitely enable it: - imx_iim0.permanent_write_enable=1 + imx_iim0.permanent_write_enable=1 endmenu diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index ff295f1..853d81a 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -84,7 +84,7 @@ endchoice endif -menu "i.MX specific settings " +menu "i.MX specific settings" config MXS_OCOTP tristate "OCOTP device" @@ -105,7 +105,7 @@ config MXS_OCOTP_WRITABLE Before being actually able to blow the bits, you need to explicitely enable writing: - ocotp0.permanent_write_enable=1 + ocotp0.permanent_write_enable=1 config MXS_CMD_BCB depends on NAND_MXS @@ -117,7 +117,7 @@ config MXS_CMD_BCB endmenu -menu "Board specific settings " +menu "Board specific settings" if MACH_TX28 diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig index 81f6127..acf70b9 100644 --- a/arch/arm/mach-omap/Kconfig +++ b/arch/arm/mach-omap/Kconfig @@ -12,7 +12,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # @@ -59,7 +59,7 @@ config OMAP3_CLOCK_CONFIG config OMAP_GPMC prompt "Support for GPMC configuration" bool - depends on (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4) + depends on (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4) default y help Enable this if you use Texas Instrument's General purpose Memory @@ -115,14 +115,14 @@ config MACH_BEAGLE select HAVE_NOSHELL select HAVE_DEFAULT_ENVIRONMENT_NEW depends on ARCH_OMAP3 - help + help Say Y here if you are using Beagle Board config MACH_OMAP3EVM bool "Texas Instrument's OMAP3 EVM" select HAVE_NOSHELL depends on ARCH_OMAP3 - help + help Say Y here if you are using OMAP3EVM config MACH_PANDA @@ -155,7 +155,7 @@ config MACH_PCAAL1 bool "Phytec phyCARD-A-L1" select HAVE_NOSHELL depends on ARCH_OMAP3 - help + help Say Y here if you are using a phyCARD-A-L1 PCA-A-L1 config MACH_PCAAXL2 @@ -169,21 +169,24 @@ config MACH_PCAAXL2 endchoice if MACH_OMAP3EVM - choice + +choice prompt "Select UART" - config OMAP3EVM_UART1 - bool "Use UART1" - depends on MACH_OMAP3EVM - help - Say Y here if you would like to use UART1 as console. - - config OMAP3EVM_UART3 - bool "Use UART3" - depends on MACH_OMAP3EVM - help - Say Y here if you would like to use UART3 as console. - endchoice +config OMAP3EVM_UART1 + bool "Use UART1" + depends on MACH_OMAP3EVM + help + Say Y here if you would like to use UART1 as console. + +config OMAP3EVM_UART3 + bool "Use UART3" + depends on MACH_OMAP3EVM + help + Say Y here if you would like to use UART3 as console. + +endchoice + endif config MACH_OMAP_ADVANCED_MUX diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig index 3a4d910..4c7412a 100644 --- a/arch/arm/mach-samsung/Kconfig +++ b/arch/arm/mach-samsung/Kconfig @@ -13,17 +13,16 @@ config ARCH_TEXT_BASE default 0x23e00000 if MACH_TINY210 config BOARDINFO - default "Mini 2440" if MACH_MINI2440 - default "Mini 6410" if MACH_MINI6410 - default "Tiny 6410" if MACH_TINY6410 + default "Mini 2440" if MACH_MINI2440 + default "Mini 6410" if MACH_MINI6410 + default "Tiny 6410" if MACH_TINY6410 default "Digi A9M2440" if MACH_A9M2440 default "Digi A9M2410" if MACH_A9M2410 - default "Tiny 210" if MACH_TINY210 + default "Tiny 210" if MACH_TINY210 config ARCH_BAREBOX_MAX_BARE_INIT_SIZE hex default 0x1ff0 if ARCH_S5PCxx -# TODO default 0x2000 if ARCH_S3C64xx if ARCH_S3C24xx @@ -71,7 +70,7 @@ config MACH_MINI2440 endchoice -menu "Board specific settings " +menu "Board specific settings" choice prompt "A9M2440 baseboard" @@ -118,7 +117,7 @@ config MACH_TINY6410 endchoice -menu "Board specific settings " +menu "Board specific settings" source arch/arm/boards/friendlyarm-tiny6410/Kconfig @@ -149,8 +148,7 @@ endchoice endif - -menu "S3C Features " +menu "S3C Features" config S3C_LOWLEVEL_INIT bool diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 1c58ba8..5d8a2e2 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -29,7 +29,7 @@ config MACH_IPE337 endchoice -choice +choice prompt "Select your board options" depends on MACH_IPE337 default MACH_IPE337_V2 diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 7a1eeac..6c16c2d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -62,8 +62,8 @@ source arch/mips/mach-xburst/Kconfig endmenu # -# Endianess selection. Sufficiently obscure so many users don't know what to -# answer,so we try hard to limit the available choices. Also the use of a +# Endianess selection. Sufficiently obscure so many users don't know what to +# answer,so we try hard to limit the available choices. Also the use of a # choice statement should be more obvious to the user. # choice @@ -98,8 +98,8 @@ config CPU_MIPS32_R1 select CPU_SUPPORTS_32BIT_KERNEL help Choose this option to build a barebox for release 1 or later of the - MIPS32 architecture. Most modern embedded systems with a 32-bit - MIPS processor are based on a MIPS32 processor. If you know the + MIPS32 architecture. Most modern embedded systems with a 32-bit + MIPS processor are based on a MIPS32 processor. If you know the specific type of processor in your system, choose those that one otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. Release 2 of the MIPS32 architecture is available since several @@ -113,8 +113,8 @@ config CPU_MIPS32_R2 select CPU_SUPPORTS_32BIT_KERNEL help Choose this option to build a barebox for release 2 or later of the - MIPS32 architecture. Most modern embedded systems with a 32-bit - MIPS processor are based on a MIPS32 processor. If you know the + MIPS32 architecture. Most modern embedded systems with a 32-bit + MIPS processor are based on a MIPS32 processor. If you know the specific type of processor in your system, choose those that one otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. @@ -125,8 +125,8 @@ config CPU_MIPS64_R1 select CPU_SUPPORTS_64BIT_KERNEL help Choose this option to build a barebox for release 1 or later of the - MIPS64 architecture. Many modern embedded systems with a 64-bit - MIPS processor are based on a MIPS64 processor. If you know the + MIPS64 architecture. Many modern embedded systems with a 64-bit + MIPS processor are based on a MIPS64 processor. If you know the specific type of processor in your system, choose those that one otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. Release 2 of the MIPS64 architecture is available since several @@ -141,14 +141,13 @@ config CPU_MIPS64_R2 select CPU_SUPPORTS_64BIT_KERNEL help Choose this option to build a barebox for release 2 or later of the - MIPS64 architecture. Many modern embedded systems with a 64-bit - MIPS processor are based on a MIPS64 processor. If you know the + MIPS64 architecture. Many modern embedded systems with a 64-bit + MIPS processor are based on a MIPS64 processor. If you know the specific type of processor in your system, choose those that one otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. endchoice - config SYS_HAS_CPU_MIPS32_R1 bool @@ -199,7 +198,7 @@ choice help You should only select this option if you have a workload that actually benefits from 64-bit processing or if your machine has - large memory. You will only be presented a single option in this + large memory. You will only be presented a single option in this menu if your system does not support both 32-bit and 64-bit modes. config 32BIT @@ -216,7 +215,7 @@ config 64BIT endchoice -menu "MIPS specific settings " +menu "MIPS specific settings" config CMD_MIPS_CPUINFO bool "cpuinfo command" diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig index e1af0c0..c49f6e9 100644 --- a/arch/nios2/Kconfig +++ b/arch/nios2/Kconfig @@ -16,13 +16,12 @@ choice prompt "Select your board" config GENERIC - bool "Generic " + bool "Generic" select NIOS2 - endchoice -menu "Board configuration " +menu "Board configuration" config EARLY_PRINTF default n diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index bcfd67f..47ee3fe 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -16,7 +16,7 @@ choice prompt "Select your board" config GENERIC - bool "Generic " + bool "Generic" select OPENRISC endchoice diff --git a/arch/ppc/mach-mpc85xx/Kconfig b/arch/ppc/mach-mpc85xx/Kconfig index b2af05e..b3738c7 100644 --- a/arch/ppc/mach-mpc85xx/Kconfig +++ b/arch/ppc/mach-mpc85xx/Kconfig @@ -17,7 +17,7 @@ choice config P2020RDB bool "P2020RDB" help - Say Y here if you are using the Freescale P2020RDB + Say Y here if you are using the Freescale P2020RDB endchoice endif diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 711bbfe..9bb93db 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1,6 +1,3 @@ -# -# -# config ARCH_TEXT_BASE hex default 0x00007c00 if MACH_X86_GENERIC @@ -39,20 +36,20 @@ endchoice choice prompt "Bring up type" - config X86_BIOS_BRINGUP - prompt "16 bit BIOS" - bool - help - Barebox will act as a BIOS based bootloader. This includes - some 16 bit real mode code and some restrictions everyone knows - from BIOS based systems. +config X86_BIOS_BRINGUP + prompt "16 bit BIOS" + bool + help + Barebox will act as a BIOS based bootloader. This includes + some 16 bit real mode code and some restrictions everyone knows + from BIOS based systems. - config X86_NATIVE_BRINGUP - bool "native" - help - Barebox will act as a native bootloader. This includes all the - required initialization needed to bring up a piece of hardware. - Note: Not implemented yet +config X86_NATIVE_BRINGUP + bool "native" + help + Barebox will act as a native bootloader. This includes all the + required initialization needed to bring up a piece of hardware. + Note: Not implemented yet endchoice diff --git a/arch/x86/boot/Kconfig b/arch/x86/boot/Kconfig index cdb82e4..8dba00d 100644 --- a/arch/x86/boot/Kconfig +++ b/arch/x86/boot/Kconfig @@ -1,6 +1,6 @@ if X86_BIOS_BRINGUP -menu "BIOS boot source " +menu "BIOS boot source" config X86_HDBOOT bool "HD boot" diff --git a/arch/x86/mach-i386/Kconfig b/arch/x86/mach-i386/Kconfig index 11f6aa6..cb12b9c 100644 --- a/arch/x86/mach-i386/Kconfig +++ b/arch/x86/mach-i386/Kconfig @@ -1,5 +1,5 @@ -menu "Board specific settings " +menu "Board specific settings" if X86_BOOTLOADER diff --git a/commands/Kconfig b/commands/Kconfig index ac9b797..75ebfb8 100644 --- a/commands/Kconfig +++ b/commands/Kconfig @@ -12,9 +12,9 @@ config HAS_POWEROFF if COMMAND_SUPPORT -menu "commands " +menu "commands" -menu "scripting " +menu "scripting" config CMD_EDIT tristate @@ -107,7 +107,7 @@ endif config CMD_TIME bool "time" - help + help Just like the unix time command this command allows to measure the execution time of a command. Note: barebox does not use interrupts, so the system timer can overrun during the execution of the command @@ -130,7 +130,7 @@ config CMD_GLOBAL endmenu -menu "file commands " +menu "file commands" config CMD_LS tristate @@ -237,7 +237,7 @@ config CMD_FILETYPE endmenu -menu "console " +menu "console" config CMD_CLEAR tristate @@ -257,7 +257,7 @@ config CMD_ECHO_E endmenu -menu "memory " +menu "memory" config CMD_LOADB select CRC16 @@ -306,8 +306,8 @@ config CMD_CRC_CMP prompt "compare 2 files crc" config CMD_DIGEST - tristate - select DIGEST + tristate + select DIGEST config CMD_MD5SUM tristate @@ -335,7 +335,7 @@ config CMD_SHA224SUM endmenu -menu "flash " +menu "flash" config CMD_FLASH tristate @@ -349,8 +349,7 @@ config CMD_UBI endmenu - -menu "booting " +menu "booting" config CMD_BOOTM tristate @@ -424,8 +423,8 @@ config CMD_BOOTU depends on ARM prompt "bootu" help - compile in the 'bootu' command to start raw (uncompressed) - Linux images + compile in the 'bootu' command to start raw (uncompressed) + Linux images config FLEXIBLE_BOOTARGS bool @@ -479,7 +478,7 @@ config CMD_OFTREE_PROBE endmenu -menu "testing " +menu "testing" config CMD_NANDTEST tristate @@ -500,7 +499,7 @@ config CMD_MTEST_ALTERNATIVE endmenu -menu "video command " +menu "video command" if VIDEO @@ -659,7 +658,7 @@ config CMD_CLK menuconfig CMD_WD bool depends on WATCHDOG - prompt "wd command " + prompt "wd command" help The 'wd' command which allows to start, stop and trigger the onboard watchdog. diff --git a/common/Kconfig b/common/Kconfig index d60db80..cc88175 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -61,7 +61,7 @@ config STDDEV config BAREBOX_UPDATE bool -menu "General Settings " +menu "General Settings" config LOCALVERSION string "Local version - append to the version string" @@ -69,7 +69,7 @@ config LOCALVERSION Append an extra string to the end of your version string. The string you set here will be appended after the contents of any files with a filename matching localversion* in your - object and source tree, in that order. Your total string can + object and source tree, in that order. Your total string can be a maximum of 64 characters. config LOCALVERSION_AUTO @@ -81,7 +81,7 @@ config LOCALVERSION_AUTO top of tree revision. A string of the format -gxxxxxxxx will be added to the localversion - if a git-based tree is found. The string generated by this will be + if a git-based tree is found. The string generated by this will be appended after any matching localversion* files, and after the value set in CONFIG_LOCALVERSION. @@ -106,7 +106,7 @@ config MEMINFO config ENVIRONMENT_VARIABLES bool "environment variables support" -menu "memory layout " +menu "memory layout" config HAVE_PBL_IMAGE bool @@ -196,7 +196,7 @@ config MEMORY_LAYOUT_DEFAULT bool "use default memory layout" help select this option to use bareboxs standard memory layout: - + stack ----- malloc heap @@ -301,7 +301,7 @@ config MACH_DO_LOWLEVEL_INIT config PROMPT string - prompt "barebox command prompt" + prompt "barebox command prompt " default "barebox:" config BAUDRATE @@ -331,33 +331,34 @@ config MAXARGS choice prompt "Select your shell" - config SHELL_HUSH - bool "hush parser" - select ENVIRONMENT_VARIABLES - select COMMAND_SUPPORT - select PARAMETER - select BINFMT - select STDDEV - help - Enable hush support. This is the most advanced shell available - for barebox. - - config SHELL_SIMPLE - bool "Simple parser" - select ENVIRONMENT_VARIABLES - select COMMAND_SUPPORT - select PARAMETER - select STDDEV - help - simple shell. No if/then, no return values from commands, no loops - - config SHELL_NONE - depends on HAVE_NOSHELL - bool "no shell (noninteractive build)" - help - No shell at all. This means no shell is started and your board has - to provide a run_shell() function which is started at the end of - the barebox startup process. +config SHELL_HUSH + bool "hush parser" + select ENVIRONMENT_VARIABLES + select COMMAND_SUPPORT + select PARAMETER + select BINFMT + select STDDEV + help + Enable hush support. This is the most advanced shell available + for barebox. + +config SHELL_SIMPLE + bool "Simple parser" + select ENVIRONMENT_VARIABLES + select COMMAND_SUPPORT + select PARAMETER + select STDDEV + help + simple shell. No if/then, no return values from commands, no loops + +config SHELL_NONE + depends on HAVE_NOSHELL + bool "no shell (noninteractive build)" + help + No shell at all. This means no shell is started and your board has + to provide a run_shell() function which is started at the end of + the barebox startup process. + endchoice config GLOB @@ -409,8 +410,8 @@ config MENU prompt "Menu Framework" depends on PROCESS_ESCAPE_SEQUENCE help - a menu framework that allow us to create list menu to simplify - barebox and make it more user-frendly + a menu framework that allow us to create list menu to simplify + barebox and make it more user-frendly config PASSWORD bool @@ -635,7 +636,7 @@ config RESET_SOURCE endmenu -menu "Debugging " +menu "Debugging" config DEBUG_INFO bool diff --git a/crypto/Kconfig b/crypto/Kconfig index a6fc1b8..4bd8dcf 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -8,7 +8,7 @@ config CRC7 bool menuconfig DIGEST - bool "Digest " + bool "Digest" if DIGEST diff --git a/drivers/Kconfig b/drivers/Kconfig index f6446e8..988ec9e 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -1,4 +1,4 @@ -menu "Drivers " +menu "Drivers" source "drivers/serial/Kconfig" source "drivers/net/Kconfig" diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index fe6f5e6..2e80c3e 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -2,7 +2,7 @@ menuconfig DISK select BLOCK select PARTITION select PARTITION_DISK - bool "Disk support " + bool "Disk support" help Add support for disk like drives like harddisks, CDROMs, SD cards and CF cards. diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index ec6c894..a30fa37 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -4,5 +4,5 @@ config MXS_APBH_DMA tristate "MXS APBH DMA ENGINE" depends on ARCH_IMX23 || ARCH_IMX28 help - Experimental! + Experimental! endmenu diff --git a/drivers/eeprom/Kconfig b/drivers/eeprom/Kconfig index ce9cfe7..0e36c82 100644 --- a/drivers/eeprom/Kconfig +++ b/drivers/eeprom/Kconfig @@ -14,11 +14,11 @@ config EEPROM_AT24 help Enable this driver to get read/write support to most I2C EEPROMs, after you configure the driver to know about each EEPROM on - your target board. Use these generic chip names, instead of + your target board. Use these generic chip names, instead of vendor-specific ones like at24c64 or 24lc02: - 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, - 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 + 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, + 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 Unless you like data loss puzzles, always be sure that any chip you configure as a 24c32 (32 kbit) or larger is NOT really a diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index e8eeb6d..89be684 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -4,7 +4,7 @@ config GPIOLIB if GPIOLIB -menu "GPIO " +menu "GPIO" config GPIO_BCM2835 bool "GPIO support for BCM2835" diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 038e2ee..0c6aec3 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -1,5 +1,5 @@ menuconfig I2C - bool "I2C drivers " + bool "I2C drivers" if I2C diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 846483c..a6f1f47 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -13,7 +13,7 @@ config KEYBOARD_GPIO to GPIO pins of various CPUs (and some other chips). Say Y here if your device has buttons connected - directly to such GPIO pins. Your board-specific + directly to such GPIO pins. Your board-specific setup logic must also provide a platform device, with configuration data saying which GPIOs are used. @@ -26,7 +26,7 @@ config KEYBOARD_IMX_KEYPAD to the IMX keypad matrix. Say Y here if your device has buttons connected - to the IMX keypad matrix. Your board-specific + to the IMX keypad matrix. Your board-specific setup logic must also provide a 'matrix_keymap_data' structure, defining the used keys. diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig index 5c0ca4d..6876117 100644 --- a/drivers/mci/Kconfig +++ b/drivers/mci/Kconfig @@ -1,5 +1,5 @@ menuconfig MCI - bool "MCI drivers " + bool "MCI drivers" select DISK help Add support for MCI drivers, used to handle MMC and SD cards @@ -92,7 +92,7 @@ config MCI_SPI depends on SPI help Some systems access MMC/SD/SDIO cards using a SPI controller - instead of using a "native" MMC/SD/SDIO controller. This has a + instead of using a "native" MMC/SD/SDIO controller. This has a disadvantage of being relatively high overhead, but a compensating advantage of working on many systems without dedicated MMC/SD/SDIO controllers. diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 699046b..606490b 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -3,7 +3,7 @@ # menuconfig MISC_DEVICES - bool "Misc devices " + bool "Misc devices" help Add support for misc strange devices diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 0a4ca31..9450f5d 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -1,5 +1,5 @@ menuconfig MTD - bool "Memory Technology Device (MTD) support" + bool "Memory Technology Device (MTD) support" if MTD diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 679ea80..61278a2 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -15,7 +15,7 @@ config MTD_DATAFLASH_WRITE_VERIFY help This adds an extra check when data is written to the flash. It may help if you are verifying chip setup (timings etc) on - your board. There is a rare possibility that even though the + your board. There is a rare possibility that even though the device thinks the write was successful, a bit could have been flipped accidentally due to device wear or something else. @@ -24,9 +24,9 @@ config MTD_M25P80 depends on SPI help This enables access to most modern SPI flash chips, used for - program and data storage. Series supported include Atmel AT26DF, - Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips - are supported as well. See the driver source for the current list, + program and data storage. Series supported include Atmel AT26DF, + Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips + are supported as well. See the driver source for the current list, or to add other chips. Note that the original DataFlash chips (AT45 series, not AT26DF), diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index d96ef9e..aa3ea34 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -1,5 +1,5 @@ menuconfig NAND - bool "NAND support " + bool "NAND support" select MTD_NAND_IDS help This enables support for accessing all type of NAND flash @@ -63,8 +63,8 @@ config NAND_OMAP_GPMC tristate "NAND Flash Support for GPMC based OMAP platforms" depends on OMAP_GPMC help - Support for NAND flash using GPMC. GPMC is a common memory - interface found on Texas Instrument's OMAP platforms + Support for NAND flash using GPMC. GPMC is a common memory + interface found on Texas Instrument's OMAP platforms config NAND_ATMEL bool @@ -77,7 +77,7 @@ config NAND_ATMEL_PMECC depends on NAND_ATMEL select NAND_ECC_HW help - Support for PMECC present on the SoC sam9x5 and sam9n12 + Support for PMECC present on the SoC sam9x5 and sam9n12 config NAND_S3C24XX bool diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index 2cf474a..6df954c 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -1,5 +1,5 @@ config UBI - bool "UBI support " + bool "UBI support" select PARTITION_NEED_MTD select CRC32 help diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index b3e5a83..43d5984 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -22,7 +22,7 @@ config ARCH_HAS_FEC_IMX config PHYLIB bool -menu "Network drivers " +menu "Network drivers" depends on NET source "drivers/net/phy/Kconfig" diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 616b539..9250305 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -2,7 +2,7 @@ # PHY Layer Configuration # -menu "phylib " +menu "phylib" if PHYLIB diff --git a/drivers/nor/Kconfig b/drivers/nor/Kconfig index a3c0223..c8ce24f 100644 --- a/drivers/nor/Kconfig +++ b/drivers/nor/Kconfig @@ -1,7 +1,7 @@ -menu "flash drivers " +menu "flash drivers" menuconfig DRIVER_CFI - bool "CFI " + bool "CFI" help If you have NOR Flash devices connected to your system and wish to use them say yes here. @@ -19,7 +19,7 @@ config DRIVER_CFI_AMD bool "support AMD flash chips" config DRIVER_CFI_BANK_WIDTH_1 - bool "Support 8-bit buswidth" + bool "Support 8-bit buswidth" depends on DRIVER_CFI default y help diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 32b033f..a8be9cd 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1,4 +1,4 @@ -menu "serial drivers " +menu "serial drivers" config DRIVER_SERIAL_ARM_DCC depends on ARM @@ -8,7 +8,7 @@ config SERIAL_AMBA_PL011 bool "ARM AMBA PL011 serial port support" depends on ARM_AMBA help - This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have + This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have an Integrator/PP2, Integrator/CP or Versatile platform, say Y here. If unsure, say N. diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index b003290..10b8fea 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -1,4 +1,4 @@ -menu "SPI drivers " +menu "SPI drivers" config SPI bool "Enable SPI driver support" diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 254b196..acdb4c6 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -1,5 +1,5 @@ menuconfig USB - bool "USB support " + bool "USB support" if USB diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 465121c..6501d42 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -1,6 +1,6 @@ menuconfig USB_GADGET depends on USB_HAVE_GADGET_DRIVER - bool "USB gadget support " + bool "USB gadget support" config USB_HAVE_GADGET_DRIVER bool diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 4aa92c5..f09ffdf 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1,5 +1,5 @@ menuconfig VIDEO - bool "Video drivers " + bool "Video drivers" help Add support for framebuffer and splash screens diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index ba33617..2e2900c 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -3,7 +3,7 @@ config WATCHDOG_IMX_RESET_SOURCE bool menuconfig WATCHDOG - bool "Watchdog support " + bool "Watchdog support" help Many platforms support a watchdog to keep track of a working machine. This framework provides routines to handle these watchdogs. diff --git a/fs/Kconfig b/fs/Kconfig index 0ab69d7..c26c3c4 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1,5 +1,5 @@ -menu "Filesystem support " +menu "Filesystem support" config FS bool diff --git a/lib/Kconfig b/lib/Kconfig index 13ecab0..5966386 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -1,4 +1,4 @@ -menu "Library routines " +menu "Library routines" config PARAMETER bool @@ -30,10 +30,10 @@ config OFTREE bool config BCH - bool + bool config BITREV - bool + bool config QSORT bool diff --git a/lib/gui/Kconfig b/lib/gui/Kconfig index 8fd12fb..da71bae 100644 --- a/lib/gui/Kconfig +++ b/lib/gui/Kconfig @@ -1,4 +1,4 @@ -menu "Library gui routines " +menu "Library gui routines" config IMAGE_RENDERER bool diff --git a/net/Kconfig b/net/Kconfig index 00fffb3..acd92ff 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -1,5 +1,5 @@ menuconfig NET - bool "Networking Support " + bool "Networking Support" if NET -- 1.7.8.6 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox