mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH] Cleanup Kconfig files
@ 2012-11-24 18:53 Alexander Shiyan
  2012-11-26  8:16 ` Sascha Hauer
  0 siblings, 1 reply; 5+ messages in thread
From: Alexander Shiyan @ 2012-11-24 18:53 UTC (permalink / raw)
  To: barebox

This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/Kconfig              |    6 ++--
 arch/arm/cpu/Kconfig          |    7 ++--
 arch/arm/mach-at91/Kconfig    |    4 +-
 arch/arm/mach-imx/Kconfig     |    8 ++--
 arch/arm/mach-mxs/Kconfig     |    6 ++--
 arch/arm/mach-omap/Kconfig    |   39 ++++++++++++----------
 arch/arm/mach-samsung/Kconfig |   16 ++++-----
 arch/blackfin/Kconfig         |    2 +-
 arch/mips/Kconfig             |   25 +++++++-------
 arch/nios2/Kconfig            |    5 +--
 arch/openrisc/Kconfig         |    2 +-
 arch/ppc/mach-mpc85xx/Kconfig |    2 +-
 arch/x86/Kconfig              |   29 +++++++---------
 arch/x86/boot/Kconfig         |    2 +-
 arch/x86/mach-i386/Kconfig    |    2 +-
 commands/Kconfig              |   31 ++++++++---------
 common/Kconfig                |   73 +++++++++++++++++++++--------------------
 crypto/Kconfig                |    2 +-
 drivers/Kconfig               |    2 +-
 drivers/ata/Kconfig           |    2 +-
 drivers/dma/Kconfig           |    2 +-
 drivers/eeprom/Kconfig        |    6 ++--
 drivers/gpio/Kconfig          |    2 +-
 drivers/i2c/Kconfig           |    2 +-
 drivers/input/Kconfig         |    4 +-
 drivers/mci/Kconfig           |    4 +-
 drivers/misc/Kconfig          |    2 +-
 drivers/mtd/Kconfig           |    2 +-
 drivers/mtd/devices/Kconfig   |    8 ++--
 drivers/mtd/nand/Kconfig      |    8 ++--
 drivers/mtd/ubi/Kconfig       |    2 +-
 drivers/net/Kconfig           |    2 +-
 drivers/net/phy/Kconfig       |    2 +-
 drivers/nor/Kconfig           |    6 ++--
 drivers/serial/Kconfig        |    4 +-
 drivers/spi/Kconfig           |    2 +-
 drivers/usb/Kconfig           |    2 +-
 drivers/usb/gadget/Kconfig    |    2 +-
 drivers/video/Kconfig         |    2 +-
 drivers/watchdog/Kconfig      |    2 +-
 fs/Kconfig                    |    2 +-
 lib/Kconfig                   |    6 ++--
 lib/gui/Kconfig               |    2 +-
 net/Kconfig                   |    2 +-
 44 files changed, 169 insertions(+), 174 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3afd885..01fe9de 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -19,7 +19,7 @@ config ARM_LINUX
 config HAVE_MACH_ARM_HEAD
 	bool
 
-menu "System Type                   "
+menu "System Type"
 
 choice
 	prompt "ARM system type"
@@ -71,7 +71,7 @@ config ARCH_NOMADIK
 	select CPU_ARM926T
 	select CLOCKSOURCE_NOMADIK
 	help
-	 Support for the Nomadik platform by ST-Ericsson
+	  Support for the Nomadik platform by ST-Ericsson
 
 config ARCH_OMAP
 	bool "TI OMAP"
@@ -153,7 +153,7 @@ config THUMB2_BAREBOX
 
 endmenu
 
-menu "Arm specific settings         "
+menu "Arm specific settings"
 
 config CMD_ARM_CPUINFO
 	bool "cpuinfo command"
diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig
index d8a5fb1..86bc174 100644
--- a/arch/arm/cpu/Kconfig
+++ b/arch/arm/cpu/Kconfig
@@ -4,7 +4,7 @@ config CPU_32
 	bool
 	default y
 
-# Select CPU types depending on the architecture selected.  This selects
+# Select CPU types depending on the architecture selected. This selects
 # which CPUs we support in the kernel image, and the compiler instruction
 # optimiser behaviour.
 
@@ -27,14 +27,13 @@ config CPU_ARM920T
 	  Say Y if you want support for the ARM920T processor.
 	  Otherwise, say N.
 
-
 # ARM926T
 config CPU_ARM926T
 	bool
 	select CPU_32v5
 	help
-	  This is a variant of the ARM920.  It has slightly different
-	  instruction sequences for cache and TLB operations.  Curiously,
+	  This is a variant of the ARM920. It has slightly different
+	  instruction sequences for cache and TLB operations. Curiously,
 	  there is no documentation on it at the ARM corporate website.
 
 	  Say Y if you want support for the ARM926T processor.
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 3a985f7..b01d84b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -121,8 +121,8 @@ choice
 
 config MACH_AT91RM9200EK
 	bool "Atmel AT91RM9200-EK Evaluation Kit"
-	help
 	select HAVE_AT91_DATAFLASH_CARD
+	help
 	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
 
@@ -390,7 +390,7 @@ config CALAO_MOB_TNY_MD2
 	depends on SUPPORT_CALAO_MOB_TNY_MD2
 
 config CALAO_MB_QIL_A9260
-	bool "MB-QIL A9260  Motherboard Board support"
+	bool "MB-QIL A9260 Motherboard Board support"
 	depends on MACH_QIL_A9260
 
 endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 3f4b452..11d2767 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -500,7 +500,7 @@ endif
 
 # ----------------------------------------------------------
 
-menu "Board specific settings       "
+menu "Board specific settings"
 
 if MACH_PCM037
 choice
@@ -561,13 +561,13 @@ endchoice
 endif
 endmenu
 
-menu "i.MX specific settings        "
+menu "i.MX specific settings"
 
 config IMX_IIM
 	tristate "IIM fusebox device"
 	depends on !ARCH_IMX21 && !ARCH_IMX21
 	help
-	  Device driver for the IC Identification Module (IIM) fusebox. Use the 
+	  Device driver for the IC Identification Module (IIM) fusebox. Use the
 	  regular md/mw commands to program and read the fusebox.
 
 	  Fuses are grouped in "rows", 8 bits per row. When using md/mw commands,
@@ -588,7 +588,7 @@ config IMX_IIM_FUSE_BLOW
 
 	  Before being actually able to blow the fuses, you need to explicitely
 	  enable it:
-	  	 imx_iim0.permanent_write_enable=1
+	    imx_iim0.permanent_write_enable=1
 
 endmenu
 
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index ff295f1..853d81a 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -84,7 +84,7 @@ endchoice
 
 endif
 
-menu "i.MX specific settings        "
+menu "i.MX specific settings"
 
 config MXS_OCOTP
 	tristate "OCOTP device"
@@ -105,7 +105,7 @@ config MXS_OCOTP_WRITABLE
 
 	  Before being actually able to blow the bits, you need to explicitely
 	  enable writing:
-		 ocotp0.permanent_write_enable=1
+	    ocotp0.permanent_write_enable=1
 
 config MXS_CMD_BCB
 	depends on NAND_MXS
@@ -117,7 +117,7 @@ config MXS_CMD_BCB
 
 endmenu
 
-menu "Board specific settings       "
+menu "Board specific settings"
 
 if MACH_TX28
 
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index 81f6127..acf70b9 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig
@@ -12,7 +12,7 @@
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 # GNU General Public License for more details.
 #
 
@@ -59,7 +59,7 @@ config OMAP3_CLOCK_CONFIG
 config OMAP_GPMC
 	prompt "Support for GPMC configuration"
 	bool
-	depends on  (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4)
+	depends on (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4)
 	default y
 	help
 	  Enable this if you use Texas Instrument's General purpose Memory
@@ -115,14 +115,14 @@ config MACH_BEAGLE
 	select HAVE_NOSHELL
 	select HAVE_DEFAULT_ENVIRONMENT_NEW
 	depends on ARCH_OMAP3
-	  help
+	help
 	  Say Y here if you are using Beagle Board
 
 config MACH_OMAP3EVM
 	bool "Texas Instrument's OMAP3 EVM"
 	select HAVE_NOSHELL
 	depends on ARCH_OMAP3
-	  help
+	help
 	  Say Y here if you are using OMAP3EVM
 
 config MACH_PANDA
@@ -155,7 +155,7 @@ config MACH_PCAAL1
 	bool "Phytec phyCARD-A-L1"
 	select HAVE_NOSHELL
 	depends on ARCH_OMAP3
-	  help
+	help
 	  Say Y here if you are using a phyCARD-A-L1 PCA-A-L1
 
 config MACH_PCAAXL2
@@ -169,21 +169,24 @@ config MACH_PCAAXL2
 endchoice
 
 if MACH_OMAP3EVM
-	choice
+
+choice
 	prompt "Select UART"
 
-	config OMAP3EVM_UART1
-		bool "Use UART1"
-		depends on MACH_OMAP3EVM
-		help
-		  Say Y here if you would like to use UART1 as console.
-
-	config OMAP3EVM_UART3
-		bool "Use UART3"
-		depends on MACH_OMAP3EVM
-		help
-		  Say Y here if you would like to use UART3 as console.
-	endchoice
+config OMAP3EVM_UART1
+	bool "Use UART1"
+	depends on MACH_OMAP3EVM
+	help
+	  Say Y here if you would like to use UART1 as console.
+
+config OMAP3EVM_UART3
+	bool "Use UART3"
+	depends on MACH_OMAP3EVM
+	help
+	  Say Y here if you would like to use UART3 as console.
+
+endchoice
+
 endif
 
 config MACH_OMAP_ADVANCED_MUX
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index 3a4d910..4c7412a 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -13,17 +13,16 @@ config ARCH_TEXT_BASE
 	default 0x23e00000 if MACH_TINY210
 
 config BOARDINFO
-	default "Mini 2440"    if MACH_MINI2440
-	default "Mini 6410"    if MACH_MINI6410
-	default "Tiny 6410"    if MACH_TINY6410
+	default "Mini 2440" if MACH_MINI2440
+	default "Mini 6410" if MACH_MINI6410
+	default "Tiny 6410" if MACH_TINY6410
 	default "Digi A9M2440" if MACH_A9M2440
 	default "Digi A9M2410" if MACH_A9M2410
-	default "Tiny 210"     if MACH_TINY210
+	default "Tiny 210" if MACH_TINY210
 
 config ARCH_BAREBOX_MAX_BARE_INIT_SIZE
 	hex
 	default 0x1ff0 if ARCH_S5PCxx
-# TODO
 	default 0x2000 if ARCH_S3C64xx
 
 if ARCH_S3C24xx
@@ -71,7 +70,7 @@ config MACH_MINI2440
 
 endchoice
 
-menu "Board specific settings       "
+menu "Board specific settings"
 
 choice
 	prompt "A9M2440 baseboard"
@@ -118,7 +117,7 @@ config MACH_TINY6410
 
 endchoice
 
-menu "Board specific settings       "
+menu "Board specific settings"
 
 source arch/arm/boards/friendlyarm-tiny6410/Kconfig
 
@@ -149,8 +148,7 @@ endchoice
 
 endif
 
-
-menu "S3C Features              "
+menu "S3C Features"
 
 config S3C_LOWLEVEL_INIT
 	bool
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 1c58ba8..5d8a2e2 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -29,7 +29,7 @@ config MACH_IPE337
 
 endchoice
 
-choice 
+choice
 	prompt "Select your board options"
 	depends on MACH_IPE337
 	default MACH_IPE337_V2
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7a1eeac..6c16c2d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -62,8 +62,8 @@ source arch/mips/mach-xburst/Kconfig
 endmenu
 
 #
-# Endianess selection.  Sufficiently obscure so many users don't know what to
-# answer,so we try hard to limit the available choices.  Also the use of a
+# Endianess selection. Sufficiently obscure so many users don't know what to
+# answer,so we try hard to limit the available choices. Also the use of a
 # choice statement should be more obvious to the user.
 #
 choice
@@ -98,8 +98,8 @@ config CPU_MIPS32_R1
 	select CPU_SUPPORTS_32BIT_KERNEL
 	help
 	  Choose this option to build a barebox for release 1 or later of the
-	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
-	  MIPS processor are based on a MIPS32 processor.  If you know the
+	  MIPS32 architecture. Most modern embedded systems with a 32-bit
+	  MIPS processor are based on a MIPS32 processor. If you know the
 	  specific type of processor in your system, choose those that one
 	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
 	  Release 2 of the MIPS32 architecture is available since several
@@ -113,8 +113,8 @@ config CPU_MIPS32_R2
 	select CPU_SUPPORTS_32BIT_KERNEL
 	help
 	  Choose this option to build a barebox for release 2 or later of the
-	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
-	  MIPS processor are based on a MIPS32 processor.  If you know the
+	  MIPS32 architecture. Most modern embedded systems with a 32-bit
+	  MIPS processor are based on a MIPS32 processor. If you know the
 	  specific type of processor in your system, choose those that one
 	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
 
@@ -125,8 +125,8 @@ config CPU_MIPS64_R1
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
 	  Choose this option to build a barebox for release 1 or later of the
-	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
-	  MIPS processor are based on a MIPS64 processor.  If you know the
+	  MIPS64 architecture. Many modern embedded systems with a 64-bit
+	  MIPS processor are based on a MIPS64 processor. If you know the
 	  specific type of processor in your system, choose those that one
 	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
 	  Release 2 of the MIPS64 architecture is available since several
@@ -141,14 +141,13 @@ config CPU_MIPS64_R2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
 	  Choose this option to build a barebox for release 2 or later of the
-	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
-	  MIPS processor are based on a MIPS64 processor.  If you know the
+	  MIPS64 architecture. Many modern embedded systems with a 64-bit
+	  MIPS processor are based on a MIPS64 processor. If you know the
 	  specific type of processor in your system, choose those that one
 	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
 
 endchoice
 
-
 config SYS_HAS_CPU_MIPS32_R1
 	bool
 
@@ -199,7 +198,7 @@ choice
 	help
 	  You should only select this option if you have a workload that
 	  actually benefits from 64-bit processing or if your machine has
-	  large memory.  You will only be presented a single option in this
+	  large memory. You will only be presented a single option in this
 	  menu if your system does not support both 32-bit and 64-bit modes.
 
 config 32BIT
@@ -216,7 +215,7 @@ config 64BIT
 
 endchoice
 
-menu "MIPS specific settings        "
+menu "MIPS specific settings"
 
 config CMD_MIPS_CPUINFO
 	bool "cpuinfo command"
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index e1af0c0..c49f6e9 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -16,13 +16,12 @@ choice
 	prompt "Select your board"
 
 config GENERIC
-	bool "Generic   "
+	bool "Generic"
 	select NIOS2
 
-
 endchoice
 
-menu "Board configuration           "
+menu "Board configuration"
 
 config EARLY_PRINTF
 	default n
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index bcfd67f..47ee3fe 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -16,7 +16,7 @@ choice
 	prompt "Select your board"
 
 config GENERIC
-	bool "Generic   "
+	bool "Generic"
 	select OPENRISC
 
 endchoice
diff --git a/arch/ppc/mach-mpc85xx/Kconfig b/arch/ppc/mach-mpc85xx/Kconfig
index b2af05e..b3738c7 100644
--- a/arch/ppc/mach-mpc85xx/Kconfig
+++ b/arch/ppc/mach-mpc85xx/Kconfig
@@ -17,7 +17,7 @@ choice
 config P2020RDB
 	bool "P2020RDB"
 	help
-	Say Y here if you are using the Freescale P2020RDB
+	  Say Y here if you are using the Freescale P2020RDB
 
 endchoice
 endif
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 711bbfe..9bb93db 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1,6 +1,3 @@
-#
-#
-#
 config ARCH_TEXT_BASE
 	hex
 	default 0x00007c00 if MACH_X86_GENERIC
@@ -39,20 +36,20 @@ endchoice
 choice
 	prompt "Bring up type"
 
-	config X86_BIOS_BRINGUP
-		prompt "16 bit BIOS"
-		bool
-		help
-		   Barebox will act as a BIOS based bootloader. This includes
-		   some 16 bit real mode code and some restrictions everyone knows
-		   from BIOS based systems.
+config X86_BIOS_BRINGUP
+	prompt "16 bit BIOS"
+	bool
+	help
+	  Barebox will act as a BIOS based bootloader. This includes
+	  some 16 bit real mode code and some restrictions everyone knows
+	  from BIOS based systems.
 
-	config X86_NATIVE_BRINGUP
-		bool "native"
-		help
-		   Barebox will act as a native bootloader. This includes all the
-		   required initialization needed to bring up a piece of hardware.
-		   Note: Not implemented yet
+config X86_NATIVE_BRINGUP
+	bool "native"
+	help
+	  Barebox will act as a native bootloader. This includes all the
+	  required initialization needed to bring up a piece of hardware.
+	  Note: Not implemented yet
 
 endchoice
 
diff --git a/arch/x86/boot/Kconfig b/arch/x86/boot/Kconfig
index cdb82e4..8dba00d 100644
--- a/arch/x86/boot/Kconfig
+++ b/arch/x86/boot/Kconfig
@@ -1,6 +1,6 @@
 if X86_BIOS_BRINGUP
 
-menu "BIOS boot source              "
+menu "BIOS boot source"
 
 config X86_HDBOOT
 	bool "HD boot"
diff --git a/arch/x86/mach-i386/Kconfig b/arch/x86/mach-i386/Kconfig
index 11f6aa6..cb12b9c 100644
--- a/arch/x86/mach-i386/Kconfig
+++ b/arch/x86/mach-i386/Kconfig
@@ -1,5 +1,5 @@
 
-menu "Board specific settings       "
+menu "Board specific settings"
 
 if X86_BOOTLOADER
 
diff --git a/commands/Kconfig b/commands/Kconfig
index ac9b797..75ebfb8 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -12,9 +12,9 @@ config HAS_POWEROFF
 
 if COMMAND_SUPPORT
 
-menu "commands                      "
+menu "commands"
 
-menu "scripting                     "
+menu "scripting"
 
 config CMD_EDIT
 	tristate
@@ -107,7 +107,7 @@ endif
 
 config CMD_TIME
 	bool "time"
-	  help
+	help
 	  Just like the unix time command this command allows to measure the
 	  execution time of a command. Note: barebox does not use interrupts,
 	  so the system timer can overrun during the execution of the command
@@ -130,7 +130,7 @@ config CMD_GLOBAL
 
 endmenu
 
-menu "file commands                 "
+menu "file commands"
 
 config CMD_LS
 	tristate
@@ -237,7 +237,7 @@ config CMD_FILETYPE
 
 endmenu
 
-menu "console                       "
+menu "console"
 
 config CMD_CLEAR
 	tristate
@@ -257,7 +257,7 @@ config CMD_ECHO_E
 
 endmenu
 
-menu "memory                        "
+menu "memory"
 
 config CMD_LOADB
 	select CRC16
@@ -306,8 +306,8 @@ config CMD_CRC_CMP
 	prompt "compare 2 files crc"
 
 config CMD_DIGEST
-       tristate
-       select DIGEST
+	tristate
+	select DIGEST
 
 config CMD_MD5SUM
 	tristate
@@ -335,7 +335,7 @@ config CMD_SHA224SUM
 
 endmenu
 
-menu "flash                         "
+menu "flash"
 
 config CMD_FLASH
 	tristate
@@ -349,8 +349,7 @@ config CMD_UBI
 
 endmenu
 
-
-menu "booting                       "
+menu "booting"
 
 config CMD_BOOTM
 	tristate
@@ -424,8 +423,8 @@ config CMD_BOOTU
 	depends on ARM
 	prompt "bootu"
 	help
-	   compile in the 'bootu' command to start raw (uncompressed)
-	   Linux images
+	  compile in the 'bootu' command to start raw (uncompressed)
+	  Linux images
 
 config FLEXIBLE_BOOTARGS
 	bool
@@ -479,7 +478,7 @@ config CMD_OFTREE_PROBE
 
 endmenu
 
-menu "testing                       "
+menu "testing"
 
 config CMD_NANDTEST
 	tristate
@@ -500,7 +499,7 @@ config CMD_MTEST_ALTERNATIVE
 
 endmenu
 
-menu "video command                  "
+menu "video command"
 
 if VIDEO
 
@@ -659,7 +658,7 @@ config CMD_CLK
 menuconfig CMD_WD
 	bool
 	depends on WATCHDOG
-	prompt "wd command                    "
+	prompt "wd command"
 	help
 	  The 'wd' command which allows to start, stop and trigger the onboard
 	  watchdog.
diff --git a/common/Kconfig b/common/Kconfig
index d60db80..cc88175 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -61,7 +61,7 @@ config STDDEV
 config BAREBOX_UPDATE
 	bool
 
-menu "General Settings              "
+menu "General Settings"
 
 config LOCALVERSION
 	string "Local version - append to the version string"
@@ -69,7 +69,7 @@ config LOCALVERSION
 	  Append an extra string to the end of your version string.
 	  The string you set here will be appended after the contents of
 	  any files with a filename matching localversion* in your
-	  object and source tree, in that order.  Your total string can
+	  object and source tree, in that order. Your total string can
 	  be a maximum of 64 characters.
 
 config LOCALVERSION_AUTO
@@ -81,7 +81,7 @@ config LOCALVERSION_AUTO
 	  top of tree revision.
 
 	  A string of the format -gxxxxxxxx will be added to the localversion
-	  if a git-based tree is found.  The string generated by this will be
+	  if a git-based tree is found. The string generated by this will be
 	  appended after any matching localversion* files, and after the value
 	  set in CONFIG_LOCALVERSION.
 
@@ -106,7 +106,7 @@ config MEMINFO
 config ENVIRONMENT_VARIABLES
 	bool "environment variables support"
 
-menu "memory layout                 "
+menu "memory layout"
 
 config HAVE_PBL_IMAGE
 	bool
@@ -196,7 +196,7 @@ config MEMORY_LAYOUT_DEFAULT
 	bool "use default memory layout"
 	help
 	  select this option to use bareboxs standard memory layout:
-	  
+
 	  stack
 	  -----
 	  malloc heap
@@ -301,7 +301,7 @@ config MACH_DO_LOWLEVEL_INIT
 
 config PROMPT
 	string
-	prompt "barebox command prompt"
+	prompt "barebox command prompt "
 	default "barebox:"
 
 config BAUDRATE
@@ -331,33 +331,34 @@ config MAXARGS
 choice
 	prompt "Select your shell"
 
-	config SHELL_HUSH
-		bool "hush parser"
-		select ENVIRONMENT_VARIABLES
-		select COMMAND_SUPPORT
-		select PARAMETER
-		select BINFMT
-		select STDDEV
-		help
-		  Enable hush support. This is the most advanced shell available
-		  for barebox.
-
-	config SHELL_SIMPLE
-		bool "Simple parser"
-		select ENVIRONMENT_VARIABLES
-		select COMMAND_SUPPORT
-		select PARAMETER
-		select STDDEV
-		help
-		  simple shell. No if/then, no return values from commands, no loops
-
-	config SHELL_NONE
-		depends on HAVE_NOSHELL
-		bool "no shell (noninteractive build)"
-		help
-		  No shell at all. This means no shell is started and your board has
-		  to provide a run_shell() function which is started at the end of
-		  the barebox startup process.
+config SHELL_HUSH
+	bool "hush parser"
+	select ENVIRONMENT_VARIABLES
+	select COMMAND_SUPPORT
+	select PARAMETER
+	select BINFMT
+	select STDDEV
+	help
+	  Enable hush support. This is the most advanced shell available
+	  for barebox.
+
+config SHELL_SIMPLE
+	bool "Simple parser"
+	select ENVIRONMENT_VARIABLES
+	select COMMAND_SUPPORT
+	select PARAMETER
+	select STDDEV
+	help
+	  simple shell. No if/then, no return values from commands, no loops
+
+config SHELL_NONE
+	depends on HAVE_NOSHELL
+	bool "no shell (noninteractive build)"
+	help
+	  No shell at all. This means no shell is started and your board has
+	  to provide a run_shell() function which is started at the end of
+	  the barebox startup process.
+
 endchoice
 
 config GLOB
@@ -409,8 +410,8 @@ config MENU
 	prompt "Menu Framework"
 	depends on PROCESS_ESCAPE_SEQUENCE
 	help
-	   a menu framework that allow us to create list menu to simplify
-	   barebox and make it more user-frendly
+	  a menu framework that allow us to create list menu to simplify
+	  barebox and make it more user-frendly
 
 config PASSWORD
 	bool
@@ -635,7 +636,7 @@ config RESET_SOURCE
 
 endmenu
 
-menu "Debugging                     "
+menu "Debugging"
 
 config DEBUG_INFO
 	bool
diff --git a/crypto/Kconfig b/crypto/Kconfig
index a6fc1b8..4bd8dcf 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -8,7 +8,7 @@ config CRC7
 	bool
 
 menuconfig DIGEST
-	bool "Digest                        "
+	bool "Digest"
 
 if DIGEST
 
diff --git a/drivers/Kconfig b/drivers/Kconfig
index f6446e8..988ec9e 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -1,4 +1,4 @@
-menu "Drivers                       "
+menu "Drivers"
 
 source "drivers/serial/Kconfig"
 source "drivers/net/Kconfig"
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index fe6f5e6..2e80c3e 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -2,7 +2,7 @@ menuconfig DISK
 	select BLOCK
 	select PARTITION
 	select PARTITION_DISK
-	bool "Disk support                  "
+	bool "Disk support"
 	help
 	  Add support for disk like drives like harddisks, CDROMs, SD cards and
 	  CF cards.
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index ec6c894..a30fa37 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -4,5 +4,5 @@ config MXS_APBH_DMA
 	tristate "MXS APBH DMA ENGINE"
 	depends on ARCH_IMX23 || ARCH_IMX28
 	help
-	Experimental!
+	  Experimental!
 endmenu
diff --git a/drivers/eeprom/Kconfig b/drivers/eeprom/Kconfig
index ce9cfe7..0e36c82 100644
--- a/drivers/eeprom/Kconfig
+++ b/drivers/eeprom/Kconfig
@@ -14,11 +14,11 @@ config EEPROM_AT24
 	help
 	  Enable this driver to get read/write support to most I2C EEPROMs,
 	  after you configure the driver to know about each EEPROM on
-	  your target board.  Use these generic chip names, instead of
+	  your target board. Use these generic chip names, instead of
 	  vendor-specific ones like at24c64 or 24lc02:
 
-	     24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
-	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
+	    24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
+	    24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
 
 	  Unless you like data loss puzzles, always be sure that any chip
 	  you configure as a 24c32 (32 kbit) or larger is NOT really a
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e8eeb6d..89be684 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -4,7 +4,7 @@ config GPIOLIB
 
 if GPIOLIB
 
-menu "GPIO                          "
+menu "GPIO"
 
 config GPIO_BCM2835
 	bool "GPIO support for BCM2835"
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 038e2ee..0c6aec3 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -1,5 +1,5 @@
 menuconfig I2C
-	bool "I2C drivers                   "
+	bool "I2C drivers"
 
 if I2C
 
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 846483c..a6f1f47 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -13,7 +13,7 @@ config KEYBOARD_GPIO
 	  to GPIO pins of various CPUs (and some other chips).
 
 	  Say Y here if your device has buttons connected
-	  directly to such GPIO pins.  Your board-specific
+	  directly to such GPIO pins. Your board-specific
 	  setup logic must also provide a platform device,
 	  with configuration data saying which GPIOs are used.
 
@@ -26,7 +26,7 @@ config KEYBOARD_IMX_KEYPAD
 	  to the IMX keypad matrix.
 
 	  Say Y here if your device has buttons connected
-	  to the IMX keypad matrix.  Your board-specific
+	  to the IMX keypad matrix. Your board-specific
 	  setup logic must also provide a 'matrix_keymap_data' structure,
 	  defining the used keys.
 
diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index 5c0ca4d..6876117 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -1,5 +1,5 @@
 menuconfig MCI
-	bool "MCI drivers                   "
+	bool "MCI drivers"
 	select DISK
 	help
 	  Add support for MCI drivers, used to handle MMC and SD cards
@@ -92,7 +92,7 @@ config MCI_SPI
 	depends on SPI
 	help
 	  Some systems access MMC/SD/SDIO cards using a SPI controller
-	  instead of using a "native" MMC/SD/SDIO controller.  This has a
+	  instead of using a "native" MMC/SD/SDIO controller. This has a
 	  disadvantage of being relatively high overhead, but a compensating
 	  advantage of working on many systems without dedicated MMC/SD/SDIO
 	  controllers.
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 699046b..606490b 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menuconfig MISC_DEVICES
-	bool "Misc devices                  "
+	bool "Misc devices"
 	help
 	  Add support for misc strange devices
 
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 0a4ca31..9450f5d 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1,5 +1,5 @@
 menuconfig MTD
-        bool "Memory Technology Device (MTD) support"
+	bool "Memory Technology Device (MTD) support"
 
 if MTD
 
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 679ea80..61278a2 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -15,7 +15,7 @@ config MTD_DATAFLASH_WRITE_VERIFY
 	help
 	  This adds an extra check when data is written to the flash.
 	  It may help if you are verifying chip setup (timings etc) on
-	  your board.  There is a rare possibility that even though the
+	  your board. There is a rare possibility that even though the
 	  device thinks the write was successful, a bit could have been
 	  flipped accidentally due to device wear or something else.
 
@@ -24,9 +24,9 @@ config MTD_M25P80
 	depends on SPI
 	help
 	  This enables access to most modern SPI flash chips, used for
-	  program and data storage.   Series supported include Atmel AT26DF,
-	  Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X.  Other chips
-	  are supported as well.  See the driver source for the current list,
+	  program and data storage. Series supported include Atmel AT26DF,
+	  Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
+	  are supported as well. See the driver source for the current list,
 	  or to add other chips.
 
 	  Note that the original DataFlash chips (AT45 series, not AT26DF),
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index d96ef9e..aa3ea34 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,5 +1,5 @@
 menuconfig NAND
-	bool "NAND support              "
+	bool "NAND support"
 	select MTD_NAND_IDS
 	help
 	  This enables support for accessing all type of NAND flash
@@ -63,8 +63,8 @@ config NAND_OMAP_GPMC
 	tristate "NAND Flash Support for GPMC based OMAP platforms"
 	depends on OMAP_GPMC
 	help
-	 Support for NAND flash using GPMC. GPMC is a common memory
-	 interface found on Texas Instrument's OMAP platforms
+	  Support for NAND flash using GPMC. GPMC is a common memory
+	  interface found on Texas Instrument's OMAP platforms
 
 config NAND_ATMEL
 	bool
@@ -77,7 +77,7 @@ config NAND_ATMEL_PMECC
 	depends on NAND_ATMEL
 	select NAND_ECC_HW
 	help
-	 Support for PMECC present on the SoC sam9x5 and sam9n12
+	  Support for PMECC present on the SoC sam9x5 and sam9n12
 
 config NAND_S3C24XX
 	bool
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 2cf474a..6df954c 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -1,5 +1,5 @@
 config UBI
-	bool "UBI support               "
+	bool "UBI support"
 	select PARTITION_NEED_MTD
 	select CRC32
 	help
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b3e5a83..43d5984 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -22,7 +22,7 @@ config ARCH_HAS_FEC_IMX
 config PHYLIB
 	bool
 
-menu "Network drivers               "
+menu "Network drivers"
 	depends on NET
 
 source "drivers/net/phy/Kconfig"
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 616b539..9250305 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -2,7 +2,7 @@
 # PHY Layer Configuration
 #
 
-menu "phylib                       "
+menu "phylib"
 
 if PHYLIB
 
diff --git a/drivers/nor/Kconfig b/drivers/nor/Kconfig
index a3c0223..c8ce24f 100644
--- a/drivers/nor/Kconfig
+++ b/drivers/nor/Kconfig
@@ -1,7 +1,7 @@
-menu "flash drivers                 "
+menu "flash drivers"
 
 menuconfig DRIVER_CFI
-	bool "CFI            "
+	bool "CFI"
 	help
 	  If you have NOR Flash devices connected to your system and wish
 	  to use them say yes here.
@@ -19,7 +19,7 @@ config DRIVER_CFI_AMD
 	bool "support AMD flash chips"
 
 config DRIVER_CFI_BANK_WIDTH_1
-	bool "Support  8-bit buswidth"
+	bool "Support 8-bit buswidth"
 	depends on DRIVER_CFI
 	default y
 	help
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 32b033f..a8be9cd 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1,4 +1,4 @@
-menu "serial drivers                "
+menu "serial drivers"
 
 config DRIVER_SERIAL_ARM_DCC
 	depends on ARM
@@ -8,7 +8,7 @@ config SERIAL_AMBA_PL011
 	bool "ARM AMBA PL011 serial port support"
 	depends on ARM_AMBA
 	help
-	  This selects the ARM(R) AMBA(R) PrimeCell PL011 UART.  If you have
+	  This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
 	  an Integrator/PP2, Integrator/CP or Versatile platform, say Y here.
 
 	  If unsure, say N.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index b003290..10b8fea 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -1,4 +1,4 @@
-menu "SPI drivers                   "
+menu "SPI drivers"
 
 config SPI
 	bool "Enable SPI driver support"
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 254b196..acdb4c6 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -1,5 +1,5 @@
 menuconfig USB
-	bool "USB support                   "
+	bool "USB support"
 
 if USB
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 465121c..6501d42 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -1,6 +1,6 @@
 menuconfig USB_GADGET
 	depends on USB_HAVE_GADGET_DRIVER
-	bool "USB gadget support            "
+	bool "USB gadget support"
 
 config USB_HAVE_GADGET_DRIVER
 	bool
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4aa92c5..f09ffdf 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1,5 +1,5 @@
 menuconfig VIDEO
-	bool "Video drivers                 "
+	bool "Video drivers"
 	help
 	  Add support for framebuffer and splash screens
 
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ba33617..2e2900c 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -3,7 +3,7 @@ config WATCHDOG_IMX_RESET_SOURCE
 	bool
 
 menuconfig WATCHDOG
-	bool "Watchdog support              "
+	bool "Watchdog support"
 	help
 	  Many platforms support a watchdog to keep track of a working machine.
 	  This framework provides routines to handle these watchdogs.
diff --git a/fs/Kconfig b/fs/Kconfig
index 0ab69d7..c26c3c4 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1,5 +1,5 @@
 
-menu "Filesystem support            "
+menu "Filesystem support"
 
 config FS
 	bool
diff --git a/lib/Kconfig b/lib/Kconfig
index 13ecab0..5966386 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -1,4 +1,4 @@
-menu "Library routines              "
+menu "Library routines"
 config PARAMETER
 	bool
 
@@ -30,10 +30,10 @@ config OFTREE
 	bool
 
 config BCH
-       bool
+	bool
 
 config BITREV
-       bool
+	bool
 
 config QSORT
 	bool
diff --git a/lib/gui/Kconfig b/lib/gui/Kconfig
index 8fd12fb..da71bae 100644
--- a/lib/gui/Kconfig
+++ b/lib/gui/Kconfig
@@ -1,4 +1,4 @@
-menu "Library gui routines           "
+menu "Library gui routines"
 
 config IMAGE_RENDERER
 	bool
diff --git a/net/Kconfig b/net/Kconfig
index 00fffb3..acd92ff 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -1,5 +1,5 @@
 menuconfig NET
-	bool "Networking Support            "
+	bool "Networking Support"
 
 if NET
 
-- 
1.7.8.6


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] Cleanup Kconfig files
  2012-11-24 18:53 [PATCH] Cleanup Kconfig files Alexander Shiyan
@ 2012-11-26  8:16 ` Sascha Hauer
  2012-11-26 14:00   ` Re[2]: " Alexander Shiyan
  2012-12-08  6:51   ` Alexander Shiyan
  0 siblings, 2 replies; 5+ messages in thread
From: Sascha Hauer @ 2012-11-26  8:16 UTC (permalink / raw)
  To: Alexander Shiyan; +Cc: barebox

On Sat, Nov 24, 2012 at 10:53:29PM +0400, Alexander Shiyan wrote:
> This patch provides a global cleanup barebox Kconfig files. This includes
> replacing spaces to tabs, formatting in accordance format, removing
> extraneous lines and spaces. No functional changes.
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 3afd885..01fe9de 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -19,7 +19,7 @@ config ARM_LINUX
>  config HAVE_MACH_ARM_HEAD
>  	bool
>  
> -menu "System Type                   "
> +menu "System Type"

These whitespaces are present on purpose. They are there for aligning
the arrows in menus in make menuconfig. I tend to say that this is a
good change anyway, because counting the spaces to align line lengths
is something which hurts during review (and I can't remember having
done this before).

If nobody objects I'll apply it. If somebody objects, I probably say him
that he should provide a patch for Kconfig instead.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re[2]: [PATCH] Cleanup Kconfig files
  2012-11-26  8:16 ` Sascha Hauer
@ 2012-11-26 14:00   ` Alexander Shiyan
  2012-12-08  6:51   ` Alexander Shiyan
  1 sibling, 0 replies; 5+ messages in thread
From: Alexander Shiyan @ 2012-11-26 14:00 UTC (permalink / raw)
  To: Sascha Hauer; +Cc: barebox

> On Sat, Nov 24, 2012 at 10:53:29PM +0400, Alexander Shiyan wrote:
> > This patch provides a global cleanup barebox Kconfig files. This includes
> > replacing spaces to tabs, formatting in accordance format, removing
> > extraneous lines and spaces. No functional changes.
> > 
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index 3afd885..01fe9de 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -19,7 +19,7 @@ config ARM_LINUX
> >  config HAVE_MACH_ARM_HEAD
> >  	bool
> >  
> > -menu "System Type                   "
> > +menu "System Type"
> 
> These whitespaces are present on purpose. They are there for aligning
> the arrows in menus in make menuconfig. I tend to say that this is a
> good change anyway, because counting the spaces to align line lengths
> is something which hurts during review (and I can't remember having
> done this before).
> 
> If nobody objects I'll apply it. If somebody objects, I probably say him
> that he should provide a patch for Kconfig instead.

I can remade some parts if necessary since this output is produced
via cleanup program. Also, is necessary, I can remade this patch for
the "next" branch.

---
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] Cleanup Kconfig files
  2012-11-26  8:16 ` Sascha Hauer
  2012-11-26 14:00   ` Re[2]: " Alexander Shiyan
@ 2012-12-08  6:51   ` Alexander Shiyan
  2012-12-08 11:16     ` Sascha Hauer
  1 sibling, 1 reply; 5+ messages in thread
From: Alexander Shiyan @ 2012-12-08  6:51 UTC (permalink / raw)
  To: Sascha Hauer; +Cc: barebox

On Mon, 26 Nov 2012 09:16:02 +0100
Sascha Hauer <s.hauer@pengutronix.de> wrote:

> On Sat, Nov 24, 2012 at 10:53:29PM +0400, Alexander Shiyan wrote:
> > This patch provides a global cleanup barebox Kconfig files. This includes
> > replacing spaces to tabs, formatting in accordance format, removing
> > extraneous lines and spaces. No functional changes.
...
> If nobody objects I'll apply it. If somebody objects, I probably say him
> that he should provide a patch for Kconfig instead.

I re-submit the updated cleanup patch based on v2012.12.0.

-- 
Alexander Shiyan <shc_work@mail.ru>

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] Cleanup Kconfig files
  2012-12-08  6:51   ` Alexander Shiyan
@ 2012-12-08 11:16     ` Sascha Hauer
  0 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2012-12-08 11:16 UTC (permalink / raw)
  To: Alexander Shiyan; +Cc: barebox

On Sat, Dec 08, 2012 at 10:51:28AM +0400, Alexander Shiyan wrote:
> On Mon, 26 Nov 2012 09:16:02 +0100
> Sascha Hauer <s.hauer@pengutronix.de> wrote:
> 
> > On Sat, Nov 24, 2012 at 10:53:29PM +0400, Alexander Shiyan wrote:
> > > This patch provides a global cleanup barebox Kconfig files. This includes
> > > replacing spaces to tabs, formatting in accordance format, removing
> > > extraneous lines and spaces. No functional changes.
> ...
> > If nobody objects I'll apply it. If somebody objects, I probably say him
> > that he should provide a patch for Kconfig instead.
> 
> I re-submit the updated cleanup patch based on v2012.12.0.

Thanks

Sascha

> 
> -- 
> Alexander Shiyan <shc_work@mail.ru>
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2012-12-08 11:17 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-11-24 18:53 [PATCH] Cleanup Kconfig files Alexander Shiyan
2012-11-26  8:16 ` Sascha Hauer
2012-11-26 14:00   ` Re[2]: " Alexander Shiyan
2012-12-08  6:51   ` Alexander Shiyan
2012-12-08 11:16     ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox