From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([92.198.50.35]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1TjGex-0006hy-4s for barebox@lists.infradead.org; Thu, 13 Dec 2012 21:49:48 +0000 From: Sascha Hauer Date: Thu, 13 Dec 2012 22:49:08 +0100 Message-Id: <1355435350-20348-6-git-send-email-s.hauer@pengutronix.de> In-Reply-To: <1355435350-20348-1-git-send-email-s.hauer@pengutronix.de> References: <1355435350-20348-1-git-send-email-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 5/7] ARM i.MX51: Add support for the Efika MX Smartbook To: barebox@lists.infradead.org The Efika MX Smartbook is a i.MX51 based netbook. This patch adds nearly full support for it including: - USB - SD card slots - Internal SPI NOR flash - Internal flash PATA drive - LEDs Signed-off-by: Sascha Hauer --- arch/arm/Makefile | 1 + arch/arm/boards/efika-mx-smartbook/Makefile | 3 + arch/arm/boards/efika-mx-smartbook/board.c | 511 ++++++++++++++++++++ arch/arm/boards/efika-mx-smartbook/config.h | 24 + arch/arm/boards/efika-mx-smartbook/dcd-data.h | 56 +++ .../boards/efika-mx-smartbook/env/bin/lvds_init | 22 + .../boards/efika-mx-smartbook/env/boot/hd-internal | 17 + .../boards/efika-mx-smartbook/env/boot/mmc-left | 19 + arch/arm/boards/efika-mx-smartbook/env/config | 29 ++ .../boards/efika-mx-smartbook/env/init/automount | 29 ++ .../boards/efika-mx-smartbook/env/init/bootsource | 10 + .../efika-mx-smartbook/env/init/config-board | 9 + .../efika-mx-smartbook/env/network/eth0-discover | 4 + arch/arm/boards/efika-mx-smartbook/flash_header.c | 29 ++ arch/arm/mach-imx/Kconfig | 8 + defaultenv-2/base/boot/net | 4 +- drivers/usb/core/usb.c | 8 +- drivers/usb/host/ehci-hcd.c | 6 + drivers/usb/otg/ulpi.c | 33 +- include/usb/ulpi.h | 43 +- 20 files changed, 843 insertions(+), 22 deletions(-) create mode 100644 arch/arm/boards/efika-mx-smartbook/Makefile create mode 100644 arch/arm/boards/efika-mx-smartbook/board.c create mode 100644 arch/arm/boards/efika-mx-smartbook/config.h create mode 100644 arch/arm/boards/efika-mx-smartbook/dcd-data.h create mode 100644 arch/arm/boards/efika-mx-smartbook/env/bin/lvds_init create mode 100644 arch/arm/boards/efika-mx-smartbook/env/boot/hd-internal create mode 100644 arch/arm/boards/efika-mx-smartbook/env/boot/mmc-left create mode 100644 arch/arm/boards/efika-mx-smartbook/env/config create mode 100644 arch/arm/boards/efika-mx-smartbook/env/init/automount create mode 100644 arch/arm/boards/efika-mx-smartbook/env/init/bootsource create mode 100644 arch/arm/boards/efika-mx-smartbook/env/init/config-board create mode 100644 arch/arm/boards/efika-mx-smartbook/env/network/eth0-discover create mode 100644 arch/arm/boards/efika-mx-smartbook/flash_header.c diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 3bd645f..478b0d8 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -150,6 +150,7 @@ board-$(CONFIG_MACH_TINY210) := friendlyarm-tiny210 board-$(CONFIG_MACH_SABRELITE) := freescale-mx6-sabrelite board-$(CONFIG_MACH_TX53) := karo-tx53 board-$(CONFIG_MACH_GUF_VINCELL) := guf-vincell +board-$(CONFIG_MACH_EFIKA_MX_SMARTBOOK) := efika-mx-smartbook machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) diff --git a/arch/arm/boards/efika-mx-smartbook/Makefile b/arch/arm/boards/efika-mx-smartbook/Makefile new file mode 100644 index 0000000..d08bb68 --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/Makefile @@ -0,0 +1,3 @@ +obj-y += board.o +obj-y += flash_header.o +pbl-y += flash_header.o diff --git a/arch/arm/boards/efika-mx-smartbook/board.c b/arch/arm/boards/efika-mx-smartbook/board.c new file mode 100644 index 0000000..aef2750 --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/board.c @@ -0,0 +1,511 @@ +/* + * Copyright (C) 2007 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define GPIO_EFIKA_SDHC1_WP IMX_GPIO_NR(1, 1) +#define GPIO_EFIKAMX_SDHC1_CD IMX_GPIO_NR(1, 0) +#define GPIO_EFIKASB_SDHC1_CD IMX_GPIO_NR(2, 27) +#define GPIO_EFIKASB_SDHC2_CD IMX_GPIO_NR(1, 8) +#define GPIO_EFIKASB_SDHC2_WP IMX_GPIO_NR(1, 7) + +#define GPIO_BACKLIGHT_POWER IMX_GPIO_NR(4, 12) +#define GPIO_BACKLIGHT_PWM IMX_GPIO_NR(1, 2) +#define GPIO_LVDS_POWER IMX_GPIO_NR(3, 7) +#define GPIO_LVDS_RESET IMX_GPIO_NR(3, 5) +#define GPIO_LVDS_ENABLE IMX_GPIO_NR(3, 12) +#define GPIO_LCD_ENABLE IMX_GPIO_NR(3, 13) + +#define GPIO_BLUETOOTH IMX_GPIO_NR(2, 11) +#define GPIO_WIFI_ENABLE IMX_GPIO_NR(2, 16) +#define GPIO_WIFI_RESET IMX_GPIO_NR(2, 10) +#define GPIO_HUB_RESET IMX_GPIO_NR(1, 5) +#define GPIO_SMSC3317_RESET IMX_GPIO_NR(2, 9) + +static iomux_v3_cfg_t efika_pads[] = { + /* ECSPI1 */ + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, + MX51_PAD_CSPI1_MISO__ECSPI1_MISO, + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, + MX51_PAD_CSPI1_SS0__GPIO4_24, + MX51_PAD_CSPI1_SS1__GPIO4_25, + MX51_PAD_GPIO1_6__GPIO1_6, + + /* ESDHC1 */ + MX51_PAD_SD1_CMD__SD1_CMD, + MX51_PAD_SD1_CLK__SD1_CLK, + MX51_PAD_SD1_DATA0__SD1_DATA0, + MX51_PAD_SD1_DATA1__SD1_DATA1, + MX51_PAD_SD1_DATA2__SD1_DATA2, + MX51_PAD_SD1_DATA3__SD1_DATA3, + MX51_PAD_GPIO1_1__GPIO1_1, + + /* USB HOST2 */ + MX51_PAD_EIM_D27__GPIO2_9, + MX51_PAD_GPIO1_5__GPIO1_5, + MX51_PAD_EIM_D16__USBH2_DATA0, + MX51_PAD_EIM_D17__USBH2_DATA1, + MX51_PAD_EIM_D18__USBH2_DATA2, + MX51_PAD_EIM_D19__USBH2_DATA3, + MX51_PAD_EIM_D20__USBH2_DATA4, + MX51_PAD_EIM_D21__USBH2_DATA5, + MX51_PAD_EIM_D22__USBH2_DATA6, + MX51_PAD_EIM_D23__USBH2_DATA7, + MX51_PAD_EIM_A24__USBH2_CLK, + MX51_PAD_EIM_A25__USBH2_DIR, + MX51_PAD_EIM_A26__GPIO2_20, + MX51_PAD_EIM_A27__USBH2_NXT, + + /* USB HOST1 */ + MX51_PAD_USBH1_CLK__USBH1_CLK, + MX51_PAD_USBH1_DIR__USBH1_DIR, + MX51_PAD_USBH1_NXT__USBH1_NXT, + MX51_PAD_USBH1_DATA0__USBH1_DATA0, + MX51_PAD_USBH1_DATA1__USBH1_DATA1, + MX51_PAD_USBH1_DATA2__USBH1_DATA2, + MX51_PAD_USBH1_DATA3__USBH1_DATA3, + MX51_PAD_USBH1_DATA4__USBH1_DATA4, + MX51_PAD_USBH1_DATA5__USBH1_DATA5, + MX51_PAD_USBH1_DATA6__USBH1_DATA6, + MX51_PAD_USBH1_DATA7__USBH1_DATA7, + MX51_PAD_USBH1_STP__GPIO1_27, + MX51_PAD_EIM_A16__GPIO2_10, + + /* PATA */ + MX51_PAD_NANDF_WE_B__PATA_DIOW, + MX51_PAD_NANDF_RE_B__PATA_DIOR, + MX51_PAD_NANDF_ALE__PATA_BUFFER_EN, + MX51_PAD_NANDF_CLE__PATA_RESET_B, + MX51_PAD_NANDF_WP_B__PATA_DMACK, + MX51_PAD_NANDF_RB0__PATA_DMARQ, + MX51_PAD_NANDF_RB1__PATA_IORDY, + MX51_PAD_GPIO_NAND__PATA_INTRQ, + MX51_PAD_NANDF_CS2__PATA_CS_0, + MX51_PAD_NANDF_CS3__PATA_CS_1, + MX51_PAD_NANDF_CS4__PATA_DA_0, + MX51_PAD_NANDF_CS5__PATA_DA_1, + MX51_PAD_NANDF_CS6__PATA_DA_2, + MX51_PAD_NANDF_D15__PATA_DATA15, + MX51_PAD_NANDF_D14__PATA_DATA14, + MX51_PAD_NANDF_D13__PATA_DATA13, + MX51_PAD_NANDF_D12__PATA_DATA12, + MX51_PAD_NANDF_D11__PATA_DATA11, + MX51_PAD_NANDF_D10__PATA_DATA10, + MX51_PAD_NANDF_D9__PATA_DATA9, + MX51_PAD_NANDF_D8__PATA_DATA8, + MX51_PAD_NANDF_D7__PATA_DATA7, + MX51_PAD_NANDF_D6__PATA_DATA6, + MX51_PAD_NANDF_D5__PATA_DATA5, + MX51_PAD_NANDF_D4__PATA_DATA4, + MX51_PAD_NANDF_D3__PATA_DATA3, + MX51_PAD_NANDF_D2__PATA_DATA2, + MX51_PAD_NANDF_D1__PATA_DATA1, + MX51_PAD_NANDF_D0__PATA_DATA0, + + /* USB U-Boot */ + MX51_PAD_EIM_A22__GPIO2_16, /* WLAN enable (1 = on) */ + MX51_PAD_EIM_A17__GPIO2_11, + + /* I2C2 */ + MX51_PAD_KEY_COL4__I2C2_SCL, + MX51_PAD_KEY_COL5__I2C2_SDA, + + MX51_PAD_GPIO1_2__GPIO1_2, /* Backlight (should be pwm) (1 = on) */ + MX51_PAD_CSI2_D19__GPIO4_12, /* Backlight power (0 = on) */ + + MX51_PAD_DISPB2_SER_CLK__GPIO3_7, /* LVDS power (1 = on) */ + MX51_PAD_DISPB2_SER_DIN__GPIO3_5, /* LVDS reset (1 = reset) */ + MX51_PAD_CSI1_D8__GPIO3_12, /* LVDS enable (1 = enable) */ + MX51_PAD_CSI1_D9__GPIO3_13, /* LCD enable (1 = on) */ + + MX51_PAD_DI1_PIN12__GPIO3_1, /* WLAN switch (0 = on) */ + + MX51_PAD_GPIO1_4__WDOG1_WDOG_B, +}; + +static iomux_v3_cfg_t efikasb_pads[] = { + /* LEDs */ + MX51_PAD_EIM_CS0__GPIO2_25, + MX51_PAD_GPIO1_3__GPIO1_3, + + /* ESHC2 */ + MX51_PAD_SD2_CMD__SD2_CMD, + MX51_PAD_SD2_CLK__SD2_CLK, + MX51_PAD_SD2_DATA0__SD2_DATA0, + MX51_PAD_SD2_DATA1__SD2_DATA1, + MX51_PAD_SD2_DATA2__SD2_DATA2, + MX51_PAD_SD2_DATA3__SD2_DATA3, + MX51_PAD_GPIO1_7__GPIO1_7, + MX51_PAD_GPIO1_8__GPIO1_8, + + MX51_PAD_EIM_CS2__GPIO2_27, +}; + +static iomux_v3_cfg_t efikamx_pads[] = { + MX51_PAD_GPIO1_0__GPIO1_0, +}; + +/* + * Generally this should work on the Efika MX smarttop aswell, + * but I do not have the hardware to test it, so hardcode this + * for the smartbook for now. + */ +static inline int machine_is_efikasb(void) +{ + return 1; +} + +static int efikamx_mem_init(void) +{ + arm_add_mem_device("ram0", 0x90000000, SZ_512M); + + return 0; +} +mem_initcall(efikamx_mem_init); + +static int spi_0_cs[] = { IMX_GPIO_NR(4, 24), IMX_GPIO_NR(4, 25) }; + +static struct spi_imx_master spi_0_data = { + .chipselect = spi_0_cs, + .num_chipselect = ARRAY_SIZE(spi_0_cs), +}; + +static const struct spi_board_info efikamx_spi_board_info[] = { + { + .name = "mc13xxx-spi", + .max_speed_hz = 30 * 1000 * 1000, + .bus_num = 0, + .chip_select = 0, + }, { + .name = "m25p80", + .chip_select = 1, + .max_speed_hz = 20 * 1000 * 1000, + .bus_num = 0, + }, +}; + +static void efikamx_power_init(void) +{ + unsigned int val; + struct mc13xxx *mc; + + mc = mc13xxx_get(); + if (!mc) { + printf("could not get mc13892\n"); + return; + } + + /* Write needed to Power Gate 2 register */ + mc13xxx_reg_read(mc, MC13892_REG_POWER_MISC, &val); + val &= ~MC13892_POWER_MISC_PWGT2SPIEN; + mc13xxx_reg_write(mc, MC13892_REG_POWER_MISC, val); + + /* Externally powered */ + mc13xxx_reg_read(mc, MC13892_REG_CHARGE, &val); + val |= MC13782_CHARGE_ICHRG0 | MC13782_CHARGE_ICHRG1 | + MC13782_CHARGE_ICHRG2 | MC13782_CHARGE_ICHRG3 | + MC13782_CHARGE_CHGAUTOB; + mc13xxx_reg_write(mc, MC13892_REG_CHARGE, val); + + /* power up the system first */ + mc13xxx_reg_write(mc, MC13892_REG_POWER_MISC, + MC13892_POWER_MISC_PWUP); + + /* Set core voltage to 1.1V */ + mc13xxx_reg_read(mc, MC13892_REG_SW_0, &val); + val &= ~MC13892_SWx_SWx_VOLT_MASK; + val |= MC13892_SWx_SWx_1_100V; + mc13xxx_reg_write(mc, MC13892_REG_SW_0, val); + + /* Setup VCC (SW2) to 1.25 */ + mc13xxx_reg_read(mc, MC13892_REG_SW_1, &val); + val &= ~MC13892_SWx_SWx_VOLT_MASK; + val |= MC13892_SWx_SWx_1_250V; + mc13xxx_reg_write(mc, MC13892_REG_SW_1, val); + + /* Setup 1V2_DIG1 (SW3) to 1.25 */ + mc13xxx_reg_read(mc, MC13892_REG_SW_2, &val); + val &= ~MC13892_SWx_SWx_VOLT_MASK; + val |= MC13892_SWx_SWx_1_250V; + mc13xxx_reg_write(mc, MC13892_REG_SW_2, val); + udelay(50); + + /* Raise the core frequency to 800MHz */ + console_flush(); + imx51_init_lowlevel(800); + clock_notifier_call_chain(); + + /* Set switchers in Auto in NORMAL mode & STANDBY mode */ + /* Setup the switcher mode for SW1 & SW2*/ + mc13xxx_reg_read(mc, MC13892_REG_SW_4, &val); + val = (val & ~((MC13892_SWMODE_MASK << MC13892_SWMODE1_SHIFT) | + (MC13892_SWMODE_MASK << MC13892_SWMODE2_SHIFT))); + val |= (MC13892_SWMODE_AUTO_AUTO << MC13892_SWMODE1_SHIFT) | + (MC13892_SWMODE_AUTO_AUTO << MC13892_SWMODE2_SHIFT); + mc13xxx_reg_write(mc, MC13892_REG_SW_4, val); + + /* Setup the switcher mode for SW3 & SW4 */ + mc13xxx_reg_read(mc, MC13892_REG_SW_5, &val); + val = (val & ~((MC13892_SWMODE_MASK << MC13892_SWMODE3_SHIFT) | + (MC13892_SWMODE_MASK << MC13892_SWMODE4_SHIFT))); + val |= (MC13892_SWMODE_AUTO_AUTO << MC13892_SWMODE3_SHIFT) | + (MC13892_SWMODE_AUTO_AUTO << MC13892_SWMODE4_SHIFT); + mc13xxx_reg_write(mc, MC13892_REG_SW_5, val); + + /* Set VDIG to 1.8V, VGEN3 to 1.8V, VCAM to 2.6V */ + mc13xxx_reg_read(mc, MC13892_REG_SETTING_0, &val); + val &= ~(MC13892_SETTING_0_VCAM_MASK | + MC13892_SETTING_0_VGEN3_MASK | + MC13892_SETTING_0_VDIG_MASK); + val |= MC13892_SETTING_0_VDIG_1_8 | + MC13892_SETTING_0_VGEN3_1_8 | + MC13892_SETTING_0_VCAM_2_6; + mc13xxx_reg_write(mc, MC13892_REG_SETTING_0, val); + + /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */ + mc13xxx_reg_read(mc, MC13892_REG_SETTING_1, &val); + val &= ~(MC13892_SETTING_1_VVIDEO_MASK | + MC13892_SETTING_1_VSD_MASK | + MC13892_SETTING_1_VAUDIO_MASK); + val |= MC13892_SETTING_1_VSD_3_15 | + MC13892_SETTING_1_VAUDIO_3_0 | + MC13892_SETTING_1_VVIDEO_2_775 | + MC13892_SETTING_1_VGEN1_1_2 | + MC13892_SETTING_1_VGEN2_3_15; + mc13xxx_reg_write(mc, MC13892_REG_SETTING_1, val); + + /* Enable VGEN1, VGEN2, VDIG, VPLL */ + mc13xxx_reg_read(mc, MC13892_REG_MODE_0, &val); + val |= MC13892_MODE_0_VGEN1EN | + MC13892_MODE_0_VDIGEN | + MC13892_MODE_0_VGEN2EN | + MC13892_MODE_0_VPLLEN; + mc13xxx_reg_write(mc, MC13892_REG_MODE_0, val); + + /* Configure VGEN3 and VCAM regulators to use external PNP */ + val = MC13892_MODE_1_VGEN3CONFIG | + MC13892_MODE_1_VCAMCONFIG; + mc13xxx_reg_write(mc, MC13892_REG_MODE_1, val); + udelay(200); + + /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ + val = MC13892_MODE_1_VGEN3EN | + MC13892_MODE_1_VGEN3CONFIG | + MC13892_MODE_1_VCAMEN | + MC13892_MODE_1_VCAMCONFIG | + MC13892_MODE_1_VVIDEOEN | + MC13892_MODE_1_VAUDIOEN | + MC13892_MODE_1_VSDEN; + mc13xxx_reg_write(mc, MC13892_REG_MODE_1, val); + + mc13xxx_reg_read(mc, MC13892_REG_POWER_CTL2, &val); + val |= MC13892_POWER_CONTROL_2_WDIRESET; + mc13xxx_reg_write(mc, MC13892_REG_POWER_CTL2, val); + + udelay(2500); +} + +static struct esdhc_platform_data efikasb_sd2_data = { + .cd_gpio = GPIO_EFIKASB_SDHC2_CD, + .wp_gpio = GPIO_EFIKASB_SDHC2_WP, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_GPIO, + .devname = "mmc_left", +}; + +static struct esdhc_platform_data efikamx_sd1_data = { + .cd_gpio = GPIO_EFIKAMX_SDHC1_CD, + .wp_gpio = GPIO_EFIKA_SDHC1_WP, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_GPIO, +}; + +static struct esdhc_platform_data efikasb_sd1_data = { + .cd_gpio = GPIO_EFIKASB_SDHC1_CD, + .wp_gpio = GPIO_EFIKA_SDHC1_WP, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_GPIO, + .devname = "mmc_back", +}; + +struct imxusb_platformdata efikamx_usbh1_pdata = { + .flags = MXC_EHCI_MODE_ULPI | MXC_EHCI_INTERFACE_DIFF_UNI, + .mode = IMX_USB_MODE_HOST, +}; + +static int efikamx_usb_init(void) +{ + gpio_direction_output(GPIO_BLUETOOTH, 0); + gpio_direction_output(GPIO_WIFI_ENABLE, 1); + gpio_direction_output(GPIO_WIFI_RESET, 0); + gpio_direction_output(GPIO_SMSC3317_RESET, 0); + gpio_direction_output(GPIO_HUB_RESET, 0); + + mdelay(10); + + gpio_set_value(GPIO_HUB_RESET, 1); + gpio_set_value(GPIO_SMSC3317_RESET, 1); + gpio_set_value(GPIO_BLUETOOTH, 1); + gpio_set_value(GPIO_WIFI_RESET, 1); + + mxc_iomux_v3_setup_pad(MX51_PAD_USBH1_STP__GPIO1_27); + gpio_set_value(IMX_GPIO_NR(1, 27), 1); + mdelay(1); + mxc_iomux_v3_setup_pad(MX51_PAD_USBH1_STP__USBH1_STP); + + if (machine_is_efikasb()) { + mxc_iomux_v3_setup_pad(MX51_PAD_EIM_A26__GPIO2_20); + gpio_set_value(IMX_GPIO_NR(2, 20), 1); + mdelay(1); + mxc_iomux_v3_setup_pad(MX51_PAD_EIM_A26__USBH2_STP); + } + + imx51_add_usbh1(&efikamx_usbh1_pdata); + + /* + * At least for the EfikaSB these do not seem to be interesting. + * The external ports are all connected to host1. + * + * imx51_add_usbotg(pdata); + * imx51_add_usbh2(pdate); + */ + + return 0; +} + +static struct gpio_led leds[] = { + { + .gpio = IMX_GPIO_NR(1, 3), + .active_low = 1, + .led.name = "mail", + }, { + .gpio = IMX_GPIO_NR(2, 25), + .led.name = "white", + }, +}; + +#define DCD_NAME static struct imx_dcd_entry dcd_entry + +#include "dcd-data.h" + +static int efikamx_devices_init(void) +{ + int i; + + mxc_iomux_v3_setup_multiple_pads(efika_pads, ARRAY_SIZE(efika_pads)); + if (machine_is_efikasb()) { + gpio_direction_output(GPIO_BACKLIGHT_POWER, 1); + mxc_iomux_v3_setup_multiple_pads(efikasb_pads, + ARRAY_SIZE(efikasb_pads)); + } else { + mxc_iomux_v3_setup_multiple_pads(efikamx_pads, + ARRAY_SIZE(efikamx_pads)); + } + + spi_register_board_info(efikamx_spi_board_info, + ARRAY_SIZE(efikamx_spi_board_info)); + imx51_add_spi0(&spi_0_data); + + efikamx_power_init(); + + if (machine_is_efikasb()) + imx51_add_mmc0(&efikasb_sd1_data); + else + imx51_add_mmc0(&efikamx_sd1_data); + + imx51_add_mmc1(&efikasb_sd2_data); + + for (i = 0; i < ARRAY_SIZE(leds); i++) + led_gpio_register(&leds[i]); + + imx51_add_i2c1(NULL); + + efikamx_usb_init(); + + imx51_add_pata(); + + writew(0x0, MX51_WDOG_BASE_ADDR + 0x8); + + imx51_bbu_internal_mmc_register_handler("mmc", "/dev/mmc_left", + BBU_HANDLER_FLAG_DEFAULT, dcd_entry, sizeof(dcd_entry), + 0); + + armlinux_set_bootparams((void *)0x90000100); + armlinux_set_architecture(2370); + armlinux_set_revision(0x5100 | imx_silicon_revision()); + + return 0; +} +device_initcall(efikamx_devices_init); + +static int efikamx_part_init(void) +{ + if (imx_bootsource() == bootsource_mmc) { + devfs_add_partition("mmc_left", 0x00000, 0x80000, + DEVFS_PARTITION_FIXED, "self0"); + devfs_add_partition("mmc_left", 0x80000, 0x80000, + DEVFS_PARTITION_FIXED, "env0"); + } + + return 0; +} +late_initcall(efikamx_part_init); + +static iomux_v3_cfg_t efika_uart_pads[] = { + /* UART */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, +}; + +static int efikamx_console_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(efika_uart_pads, + ARRAY_SIZE(efika_uart_pads)); + + imx51_add_uart0(); + + return 0; +} +console_initcall(efikamx_console_init); diff --git a/arch/arm/boards/efika-mx-smartbook/config.h b/arch/arm/boards/efika-mx-smartbook/config.h new file mode 100644 index 0000000..b7effe5 --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/config.h @@ -0,0 +1,24 @@ +/** + * @file + * @brief Global defintions for the ARM i.MX51 based babbage board + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#endif /* __CONFIG_H */ diff --git a/arch/arm/boards/efika-mx-smartbook/dcd-data.h b/arch/arm/boards/efika-mx-smartbook/dcd-data.h new file mode 100644 index 0000000..6795e19 --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/dcd-data.h @@ -0,0 +1,56 @@ +DCD_NAME[] = { + { .ptr_type = 4, .addr = 0x73fa88a0, .val = 0x00000000, }, + { .ptr_type = 4, .addr = 0x73fa850c, .val = 0x000020c5, }, + { .ptr_type = 4, .addr = 0x73fa8510, .val = 0x000020c5, }, + { .ptr_type = 4, .addr = 0x73fa883c, .val = 0x00000005, }, + { .ptr_type = 4, .addr = 0x73fa8848, .val = 0x00000005, }, + { .ptr_type = 4, .addr = 0x73fa84b8, .val = 0x000000e7, }, + { .ptr_type = 4, .addr = 0x73fa84bc, .val = 0x00000045, }, + { .ptr_type = 4, .addr = 0x73fa84c0, .val = 0x00000045, }, + { .ptr_type = 4, .addr = 0x73fa84c4, .val = 0x00000045, }, + { .ptr_type = 4, .addr = 0x73fa84c8, .val = 0x00000045, }, + { .ptr_type = 4, .addr = 0x73fa8820, .val = 0x00000000, }, + { .ptr_type = 4, .addr = 0x73fa84a4, .val = 0x00000005, }, + { .ptr_type = 4, .addr = 0x73fa84a8, .val = 0x00000005, }, + { .ptr_type = 4, .addr = 0x73fa84ac, .val = 0x000000e5, }, + { .ptr_type = 4, .addr = 0x73fa84b0, .val = 0x000000e5, }, + { .ptr_type = 4, .addr = 0x73fa84b4, .val = 0x000000e5, }, + { .ptr_type = 4, .addr = 0x73fa84cc, .val = 0x000000e5, }, + { .ptr_type = 4, .addr = 0x73fa84d0, .val = 0x000000e4, }, + { .ptr_type = 4, .addr = 0x73fa882c, .val = 0x00000004, }, + { .ptr_type = 4, .addr = 0x73fa88a4, .val = 0x00000004, }, + { .ptr_type = 4, .addr = 0x73fa88ac, .val = 0x00000004, }, + { .ptr_type = 4, .addr = 0x73fa88b8, .val = 0x00000004, }, + { .ptr_type = 4, .addr = 0x83fd9000, .val = 0x82a20000, }, + { .ptr_type = 4, .addr = 0x83fd9008, .val = 0x82a20000, }, + { .ptr_type = 4, .addr = 0x83fd9010, .val = 0xcaaaf6d0, }, + { .ptr_type = 4, .addr = 0x83fd9004, .val = 0x333574aa, }, + { .ptr_type = 4, .addr = 0x83fd900c, .val = 0x333574aa, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x04008008, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x0000801a, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x0000801b, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x00448019, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x07328018, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x04008008, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x00008010, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x00008010, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x06328018, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x03808019, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x00008000, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x0400800c, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x0000801e, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x0000801f, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x0000801d, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x0732801c, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x0400800c, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x00008014, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x00008014, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x0632801c, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x0380801d, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x00008004, }, + { .ptr_type = 4, .addr = 0x83fd9000, .val = 0xb2a20000, }, + { .ptr_type = 4, .addr = 0x83fd9008, .val = 0xb2a20000, }, + { .ptr_type = 4, .addr = 0x83fd9010, .val = 0x000ad6d0, }, + { .ptr_type = 4, .addr = 0x83fd9034, .val = 0x90000000, }, + { .ptr_type = 4, .addr = 0x83fd9014, .val = 0x00000000, }, +}; diff --git a/arch/arm/boards/efika-mx-smartbook/env/bin/lvds_init b/arch/arm/boards/efika-mx-smartbook/env/bin/lvds_init new file mode 100644 index 0000000..692392c --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/env/bin/lvds_init @@ -0,0 +1,22 @@ +#!/bin/sh + +# Initialize lvds and backlight in case your Kernel does not handle this... + +GPIO_BACKLIGHT_POWER=108 +GPIO_BACKLIGHT_PWM=2 +GPIO_LVDS_POWER=71 +GPIO_LVDS_RESET=69 +GPIO_LVDS_ENABLE=76 +GPIO_LCD_ENABLE=77 + +gpio_direction_output $GPIO_BACKLIGHT_PWM 0 +gpio_direction_output $GPIO_LVDS_RESET 1 +gpio_direction_output $GPIO_LVDS_POWER 1 +msleep 5 +gpio_direction_output $GPIO_LVDS_RESET 0 +msleep 5 +gpio_direction_output $GPIO_LVDS_ENABLE 1 +gpio_direction_output $GPIO_BACKLIGHT_POWER 0 +gpio_direction_output $GPIO_LCD_ENABLE 1 +msleep 300 +gpio_direction_output $GPIO_BACKLIGHT_PWM 1 diff --git a/arch/arm/boards/efika-mx-smartbook/env/boot/hd-internal b/arch/arm/boards/efika-mx-smartbook/env/boot/hd-internal new file mode 100644 index 0000000..ccd0f69 --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/env/boot/hd-internal @@ -0,0 +1,17 @@ +#!/bin/sh + +if [ "$1" = menu ]; then + boot-menu-add-entry "$0" "internal harddisk" + exit +fi + +path="/mnt/internal-hd0.0" + +global.bootm.image="${path}/linuximage" + +oftree=${path}/oftree +if [ -f $oftree ]; then + global.bootm.oftree="$oftree" +fi + +global.linux.bootargs.dyn.root="root=/dev/sda2" diff --git a/arch/arm/boards/efika-mx-smartbook/env/boot/mmc-left b/arch/arm/boards/efika-mx-smartbook/env/boot/mmc-left new file mode 100644 index 0000000..21935c6 --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/env/boot/mmc-left @@ -0,0 +1,19 @@ +#!/bin/sh + +if [ "$1" = menu ]; then + boot-menu-add-entry "$0" "left MMC slot" + exit +fi + +path="/mnt/mmc-left.0" + +global.bootm.image="${path}/linuximage" + +oftree=${path}/oftree +if [ -f $oftree ]; then + global.bootm.oftree="$oftree" +fi + +# The rootdevice may actually be mmcblk1p2 if a card +# is inserted to the back MMC slot +global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2" diff --git a/arch/arm/boards/efika-mx-smartbook/env/config b/arch/arm/boards/efika-mx-smartbook/env/config new file mode 100644 index 0000000..46aff49 --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/env/config @@ -0,0 +1,29 @@ +#!/bin/sh + +# change network settings in /env/network/eth0 +# change mtd partition settings and automountpoints in /env/init/* + +#global.hostname= + +# set to false if you do not want to have colors +global.allow_color=true + +# user (used for network filenames) +global.user=none + +# timeout in seconds before the default boot entry is started +global.autoboot_timeout=1 + +# default boot entry (one of /env/boot/*) +# (if not overwritten here, the bootdevice barebox comes from +# is used) +#global.boot.default=net + +# base bootargs +global.linux.bootargs.base="console=ttymxc0,115200 console=tty1" + +# suitable for 800MHz +global linux.bootargs.lpj="lpj=3997696" + +# speed up booting by being more quiet +global linux.bootargs.quiet="quiet" diff --git a/arch/arm/boards/efika-mx-smartbook/env/init/automount b/arch/arm/boards/efika-mx-smartbook/env/init/automount new file mode 100644 index 0000000..8cb5eaf --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/env/init/automount @@ -0,0 +1,29 @@ +#!/bin/sh + +if [ "$1" = menu ]; then + init-menu-add-entry "$0" "Automountpoints" + exit +fi + +# automount tftp server based on $eth0.serverip + +mkdir -p /mnt/tftp +automount /mnt/tftp 'ifup eth0 && mount -t tftp $eth0.serverip /mnt/tftp' + +# automount nfs server example + +# internal harddisk /boot partition +mkdir -p /mnt/internal-hd0.0 +automount -d /mnt/internal-hd0.0 'mount /dev/ata0.0 /mnt/internal-hd0.0' + +# internal harddisk rootfs +mkdir -p /mnt/internal-hd0.1 +automount -d /mnt/internal-hd0.1 'mount /dev/ata0.1 /mnt/internal-hd0.1' + +# left SD card slot, first partition +mkdir -p /mnt/mmc-left.0 +automount -d /mnt/mmc-left.0 'mount /dev/mmc_left.0 /mnt/mmc-left.0' + +# back SD card slot, first partition +mkdir -p /mnt/mmc-back.0 +automount -d /mnt/mmc-back.0 'mount /dev/mmc_back.0 /mnt/mmc-back.0' diff --git a/arch/arm/boards/efika-mx-smartbook/env/init/bootsource b/arch/arm/boards/efika-mx-smartbook/env/init/bootsource new file mode 100644 index 0000000..fb08469 --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/env/init/bootsource @@ -0,0 +1,10 @@ +#!/bin/sh + +# by default pick kernel from MMC card if booting from +# it, otherwise default to boot from internal harddisk + +if [ $barebox_loc = mmc ]; then + global.boot.default=mmc-left +else + global.boot.default=hd-internal +fi diff --git a/arch/arm/boards/efika-mx-smartbook/env/init/config-board b/arch/arm/boards/efika-mx-smartbook/env/init/config-board new file mode 100644 index 0000000..22993f9 --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/env/init/config-board @@ -0,0 +1,9 @@ +#!/bin/sh + +# board defaults, do not change in running system. Change /env/config +# instead + +global.hostname=efikasb +global.linux.bootargs.base="console=ttymxc0,115200" + +[ -f /env/config ] && /env/config diff --git a/arch/arm/boards/efika-mx-smartbook/env/network/eth0-discover b/arch/arm/boards/efika-mx-smartbook/env/network/eth0-discover new file mode 100644 index 0000000..f8368a5 --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/env/network/eth0-discover @@ -0,0 +1,4 @@ +#!/bin/sh + +usb +sleep 3 diff --git a/arch/arm/boards/efika-mx-smartbook/flash_header.c b/arch/arm/boards/efika-mx-smartbook/flash_header.c new file mode 100644 index 0000000..f3f1e4b --- /dev/null +++ b/arch/arm/boards/efika-mx-smartbook/flash_header.c @@ -0,0 +1,29 @@ +#include +#include +#include + +void __naked __flash_header_start go(void) +{ + barebox_arm_head(); +} + +#define DCD_NAME struct imx_dcd_entry __dcd_entry_section dcd_entry + +#include "dcd-data.h" + +#define APP_DEST 0x90000000 + +struct imx_flash_header __flash_header_section flash_header = { + .app_code_jump_vector = APP_DEST + 0x1000, + .app_code_barker = APP_CODE_BARKER, + .app_code_csf = 0, + .dcd_ptr_ptr = APP_DEST + 0x400 + offsetof(struct imx_flash_header, dcd), + .super_root_key = 0, + .dcd = APP_DEST + 0x400 + offsetof(struct imx_flash_header, dcd_barker), + .app_dest = APP_DEST, + .dcd_barker = DCD_BARKER, + .dcd_block_len = sizeof (dcd_entry), +}; + +unsigned long __image_len_section barebox_len = DCD_BAREBOX_SIZE; + diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ec4f864..ea67731 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -29,6 +29,7 @@ config ARCH_TEXT_BASE default 0x4fc00000 if MACH_SABRELITE default 0x8fe00000 if MACH_TX53 default 0x7fc00000 if MACH_GUF_VINCELL + default 0x97f00000 if MACH_EFIKA_MX_SMARTBOOK config BOARDINFO default "Eukrea CPUIMX25" if MACH_EUKREA_CPUIMX25 @@ -48,6 +49,7 @@ config BOARDINFO default "Freescale i.MX51 PDK" if MACH_FREESCALE_MX51_PDK default "Freescale i.MX53 LOCO" if MACH_FREESCALE_MX53_LOCO default "Freescale i.MX53 SMD" if MACH_FREESCALE_MX53_SMD + default "Efika MX smartbook" if MACH_EFIKA_MX_SMARTBOOK default "Garz+Fricke Cupid" if MACH_GUF_CUPID default "Ka-Ro tx25" if MACH_TX25 default "TQ tqma53" if MACH_TQMA53 @@ -428,6 +430,12 @@ config MACH_CCMX51_BASEBOARD This adds board specific devices that can be found on Digi evaluation board for CCMX51 module. +config MACH_EFIKA_MX_SMARTBOOK + bool "Efika MX smartbook" + select HAVE_DEFAULT_ENVIRONMENT_NEW + help + Choose this to compile barebox for the Efika MX Smartbook + endchoice endif diff --git a/defaultenv-2/base/boot/net b/defaultenv-2/base/boot/net index 90c25aa..0eac84b 100644 --- a/defaultenv-2/base/boot/net +++ b/defaultenv-2/base/boot/net @@ -8,7 +8,7 @@ fi path="/mnt/tftp" global.bootm.image="${path}/${global.user}-linux-${global.hostname}" -#global.bootm.oftree="${path}/${global.user}-oftree-${global.hostname}" +global.bootm.oftree="${path}/${global.user}-oftree-${global.hostname}" nfsroot="/home/${global.user}/nfsroot/${global.hostname}" bootargs-ip -global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp" +global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp rootwait" diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 9dc931b..3b147fb 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -454,14 +454,14 @@ static struct usb_device *usb_alloc_new_device(void) if (!usbdev) return NULL; - usbdev->devnum = dev_index + 1; + dev_index++; + + usbdev->devnum = dev_index; usbdev->maxchild = 0; usbdev->dev.bus = &usb_bus_type; usbdev->setup_packet = dma_alloc(sizeof(*usbdev->setup_packet)); usbdev->descriptor = dma_alloc(sizeof(*usbdev->descriptor)); - dev_index++; - return usbdev; } @@ -494,7 +494,7 @@ void usb_rescan(void) usb_new_device(dev); } - printf("%d USB Device(s) found\n", dev_index); + printf("%d USB Device(s) found\n", dev_index - 1); } /* diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index d6083e0..02ec714 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -33,6 +33,7 @@ #include "ehci.h" struct ehci_priv { + struct device_d *dev; int rootdev; struct ehci_hccr *hccr; struct ehci_hcor *hcor; @@ -610,7 +611,10 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, * usb 2.0 specification say 50 ms resets on * root */ + ehci_powerup_fixup(ehci->dev, ®); + wait_ms(50); + ehci->portreset |= 1 << le16_to_cpu(req->index); /* terminate the reset */ ehci_writel(status_reg, reg & ~EHCI_PS_PR); @@ -816,6 +820,8 @@ int ehci_register(struct device_d *dev, struct ehci_data *data) ehci = xzalloc(sizeof(struct ehci_priv)); host = &ehci->host; dev->priv = ehci; + ehci->dev = dev; + ehci->flags = data->flags; ehci->hccr = data->hccr; ehci->hcor = data->hcor; diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c index 61cbada..19f64e0 100644 --- a/drivers/usb/otg/ulpi.c +++ b/drivers/usb/otg/ulpi.c @@ -111,6 +111,23 @@ int ulpi_clear(u8 bits, int reg, void __iomem *view) } EXPORT_SYMBOL(ulpi_clear); +int ulpi_write(u8 bits, int reg, void __iomem *view) +{ + int ret; + + writel((ULPIVW_RUN | ULPIVW_WRITE | + (reg << ULPIVW_ADDR_SHIFT) | + ((bits & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), + view); + + /* wait for completion */ + ret = ulpi_poll(view, ULPIVW_RUN); + if (ret < 0) + return ret; + return 0; +} +EXPORT_SYMBOL(ulpi_write); + struct ulpi_info { uint32_t id; char *name; @@ -161,18 +178,18 @@ int ulpi_set_vbus(void __iomem *view, int on) int ret; if (on) { - ret = ulpi_set(DRV_VBUS_EXT | /* enable external Vbus */ - DRV_VBUS | /* enable internal Vbus */ - USE_EXT_VBUS_IND | /* use external indicator */ - CHRG_VBUS, /* charge Vbus */ + ret = ulpi_set(ULPI_OTG_DRV_VBUS_EXT | /* enable external Vbus */ + ULPI_OTG_DRV_VBUS | /* enable internal Vbus */ + ULPI_OTG_USE_EXT_VBUS_IND | /* use external indicator */ + ULPI_OTG_CHRG_VBUS, /* charge Vbus */ ULPI_OTGCTL, view); } else { - ret = ulpi_clear(DRV_VBUS_EXT | /* disable external Vbus */ - DRV_VBUS, /* disable internal Vbus */ + ret = ulpi_clear(ULPI_OTG_DRV_VBUS_EXT | /* disable external Vbus */ + ULPI_OTG_DRV_VBUS, /* disable internal Vbus */ ULPI_OTGCTL, view); - ret |= ulpi_set(USE_EXT_VBUS_IND | /* use external indicator */ - DISCHRG_VBUS, /* discharge Vbus */ + ret |= ulpi_set(ULPI_OTG_USE_EXT_VBUS_IND | /* use external indicator */ + ULPI_OTG_DISCHRG_VBUS, /* discharge Vbus */ ULPI_OTGCTL, view); } diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h index 542993c..e45ea6e 100644 --- a/include/usb/ulpi.h +++ b/include/usb/ulpi.h @@ -1,6 +1,7 @@ #ifndef __MACH_ULPI_H #define __MACH_ULPI_H +int ulpi_write(u8 bits, int reg, void __iomem *view); int ulpi_set(u8 bits, int reg, void __iomem *view); int ulpi_clear(u8 bits, int reg, void __iomem *view); int ulpi_read(int reg, void __iomem *view); @@ -11,6 +12,7 @@ int ulpi_setup(void __iomem *view, int on); #define ULPI_VID_HIGH 0x01 /* Vendor ID high */ #define ULPI_PID_LOW 0x02 /* Product ID low */ #define ULPI_PID_HIGH 0x03 /* Product ID high */ +#define ULPI_FUNCTION_CTRL 0x04 #define ULPI_ITFCTL 0x07 /* Interface Control */ #define ULPI_OTGCTL 0x0A /* OTG Control */ @@ -18,15 +20,40 @@ int ulpi_setup(void __iomem *view, int on); #define ULPI_REG_SET 0x01 #define ULPI_REG_CLEAR 0x02 +/* Function Control */ +#define ULPI_FC_XCVRSEL_MASK (3 << 0) +#define ULPI_FC_HIGH_SPEED (0 << 0) +#define ULPI_FC_FULL_SPEED (1 << 0) +#define ULPI_FC_LOW_SPEED (2 << 0) +#define ULPI_FC_FS4LS (3 << 0) +#define ULPI_FC_TERMSELECT (1 << 2) +#define ULPI_FC_OPMODE_MASK (3 << 3) +#define ULPI_FC_OPMODE_NORMAL (0 << 3) +#define ULPI_FC_OPMODE_NONDRIVING (1 << 3) +#define ULPI_FC_OPMODE_DISABLE_NRZI (2 << 3) +#define ULPI_FC_OPMODE_NOSYNC_NOEOP (3 << 3) +#define ULPI_FC_RESET (1 << 5) +#define ULPI_FC_SUSPENDM (1 << 6) + +/* Interface Control */ +#define ULPI_IFACE_6_PIN_SERIAL_MODE (1 << 0) +#define ULPI_IFACE_3_PIN_SERIAL_MODE (1 << 1) +#define ULPI_IFACE_CARKITMODE (1 << 2) +#define ULPI_IFACE_CLOCKSUSPENDM (1 << 3) +#define ULPI_IFACE_AUTORESUME (1 << 4) +#define ULPI_IFACE_EXTVBUS_COMPLEMENT (1 << 5) +#define ULPI_IFACE_PASSTHRU (1 << 6) +#define ULPI_IFACE_PROTECT_IFC_DISABLE (1 << 7) + /* ULPI OTG Control Register bits */ -#define USE_EXT_VBUS_IND (1 << 7) /* Use ext. Vbus indicator */ -#define DRV_VBUS_EXT (1 << 6) /* Drive Vbus external */ -#define DRV_VBUS (1 << 5) /* Drive Vbus */ -#define CHRG_VBUS (1 << 4) /* Charge Vbus */ -#define DISCHRG_VBUS (1 << 3) /* Discharge Vbus */ -#define DM_PULL_DOWN (1 << 2) /* enable DM Pull Down */ -#define DP_PULL_DOWN (1 << 1) /* enable DP Pull Down */ -#define ID_PULL_UP (1 << 0) /* enable ID Pull Up */ +#define ULPI_OTG_USE_EXT_VBUS_IND (1 << 7) /* Use ext. Vbus indicator */ +#define ULPI_OTG_DRV_VBUS_EXT (1 << 6) /* Drive Vbus external */ +#define ULPI_OTG_DRV_VBUS (1 << 5) /* Drive Vbus */ +#define ULPI_OTG_CHRG_VBUS (1 << 4) /* Charge Vbus */ +#define ULPI_OTG_DISCHRG_VBUS (1 << 3) /* Discharge Vbus */ +#define ULPI_OTG_DM_PULL_DOWN (1 << 2) /* enable DM Pull Down */ +#define ULPI_OTG_DP_PULL_DOWN (1 << 1) /* enable DP Pull Down */ +#define ULPI_OTG_ID_PULL_UP (1 << 0) /* enable ID Pull Up */ #endif /* __MACH_ULPI_H */ -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox