mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 03/13] at91: factoryse PMC address as it's the same on every soc
Date: Fri, 28 Dec 2012 20:16:04 +0100	[thread overview]
Message-ID: <1356722174-22598-3-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1356722174-22598-1-git-send-email-plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/include/mach/at91rm9200.h  |    1 -
 arch/arm/mach-at91/include/mach/at91sam9260.h |    1 -
 arch/arm/mach-at91/include/mach/at91sam9261.h |    1 -
 arch/arm/mach-at91/include/mach/at91sam9263.h |    1 -
 arch/arm/mach-at91/include/mach/at91sam9g45.h |    1 -
 arch/arm/mach-at91/include/mach/at91sam9n12.h |    1 -
 arch/arm/mach-at91/include/mach/at91sam9x5.h  |    1 -
 arch/arm/mach-at91/include/mach/hardware.h    |    2 ++
 8 files changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index 2850f0d..69ebaab 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -84,7 +84,6 @@
  */
 #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
 #define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
 #define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
 #define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
 #define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index be07e57..e1ec7e5 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -87,7 +87,6 @@
 #define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
 #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
 #define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
 #define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index d51673e..17a3949 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -73,7 +73,6 @@
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
 #define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
 #define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index c8374a7..c887b38 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -87,7 +87,6 @@
 #define AT91_CCFG	(0xffffed10 - AT91_BASE_SYS)
 #define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
 #define AT91_RTT0	(0xfffffd20 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 10f3170..1c98491 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -97,7 +97,6 @@
 #define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
 #define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h b/arch/arm/mach-at91/include/mach/at91sam9n12.h
index dcbdb1b..afe0034 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9n12.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9n12.h
@@ -93,7 +93,6 @@
 #define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
 #define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC	(0xfffffe00 - AT91_BASE_SYS)
 #define AT91_SHDWC	(0xfffffe10 - AT91_BASE_SYS)
 #define AT91_PIT	(0xfffffe30 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
index 2240710..ca778fb 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -100,7 +100,6 @@
 #define AT91_DMA1	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
 #define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC	(0xfffffe00 - AT91_BASE_SYS)
 #define AT91_SHDWC	(0xfffffe10 - AT91_BASE_SYS)
 #define AT91_PIT	(0xfffffe30 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 64efb2a..b4e24af 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -20,6 +20,8 @@
 /* 9263, 9g45 */
 #define AT91_BASE_DBGU1	0xffffee00
 
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+
 #if defined(CONFIG_ARCH_AT91RM9200)
 #include <mach/at91rm9200.h>
 #elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-12-28 19:17 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-28 19:13 [PATCH 00/13] at91: cleanup and switch core driver to device/driver Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16 ` [PATCH 01/13] at91: factorise dbgu address Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 02/13] at91: enable clock via clock framework Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:58     ` Sascha Hauer
2012-12-28 19:16   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-01-02 11:00     ` [PATCH 03/13] at91: factoryse PMC address as it's the same on every soc Sascha Hauer
2012-12-28 19:16   ` [PATCH 04/13] at91: pmc: drop AT91_BASE_SYS Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 05/13] at91: introduce Kconfig to select the dbgu for lowlevel debug Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 06/13] at91: sync with the kernel address base Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 07/13] at91: at91sam9: provide its own clkdev for pit Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 08/13] at91: PIT: switch to platfrom_driver Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:59     ` Sascha Hauer
2012-12-28 19:16   ` [PATCH 09/13] at91: autodetect the soc one time at postcore_initcall Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 10/13] at91: SMC: switch to platfrom_driver Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:59     ` Sascha Hauer
2012-12-28 19:16   ` [PATCH 11/13] at91: wdt: drop AT91_SYS_BASE Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 12/13] at91: introduce AT91SAM9_SMC and AT91SAM9_TIMER Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 13/13] at91: drop AT91_BASE_PIOx for soc specific one for none boot code Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:07 ` [PATCH 00/13] at91: cleanup and switch core driver to device/driver Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1356722174-22598-3-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox