From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-ee0-f42.google.com ([74.125.83.42]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1Tv6sl-0003xa-Br for barebox@lists.infradead.org; Tue, 15 Jan 2013 13:48:55 +0000 Received: by mail-ee0-f42.google.com with SMTP id b47so61403eek.15 for ; Tue, 15 Jan 2013 05:48:48 -0800 (PST) From: Alexander Aring Date: Tue, 15 Jan 2013 14:48:50 +0100 Message-Id: <1358257730-20579-9-git-send-email-alex.aring@gmail.com> In-Reply-To: <1358257730-20579-1-git-send-email-alex.aring@gmail.com> References: <1358257730-20579-1-git-send-email-alex.aring@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 8/8] memtest: add rewritten memtest command To: barebox@lists.infradead.org Rewrite memtest command: - Skip barebox sdram regions. - Uncache unused mem regions while testing. - Add iteration parameter. - Add parameter to do only bus testing. - Check start and end addresses. - Testing all banks if no start and end address are given. - Add sha changes (thanks): - fix calculation of regions to test. When we use PAGE_ALIGN on size, size can be to high. - start address has to be aligned up - end address has to be aligned down - then size can be calculated as end - start + 1 - Add ctrlc() to the longer loops - Add a progress bar to give some visual feedback that something issues still going on. - Change to use end element instead of size in region struct. - Fix some newline issues. - Add '-c' parameter if CONFIG_MMU enabled to test with enabled cache. - Fix some size calculation. - set start address to 0xffffffff Signed-off-by: Alexander Aring --- commands/Kconfig | 9 + commands/Makefile | 1 + commands/memtest.c | 698 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 708 insertions(+) create mode 100644 commands/memtest.c diff --git a/commands/Kconfig b/commands/Kconfig index fc0e448..f027a7e 100644 --- a/commands/Kconfig +++ b/commands/Kconfig @@ -496,6 +496,15 @@ config CMD_NANDTEST select PARTITION_NEED_MTD prompt "nandtest" +config CMD_MEMTEST + tristate + prompt "memtest" + help + This command enables a memtest to test installed memory. + During this test allocated iomem regions will be skipped. + If tested architecture has MMU with PTE flags support, + caching can be set enabled or disabled. + endmenu menu "video command" diff --git a/commands/Makefile b/commands/Makefile index 3145685..6b4d9cb 100644 --- a/commands/Makefile +++ b/commands/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_CMD_LOADY) += loadxy.o obj-$(CONFIG_CMD_LOADS) += loads.o obj-$(CONFIG_CMD_ECHO) += echo.o obj-$(CONFIG_CMD_MEMORY) += mem.o +obj-$(CONFIG_CMD_MEMTEST) += memtest.o obj-$(CONFIG_CMD_EDIT) += edit.o obj-$(CONFIG_CMD_EXEC) += exec.o obj-$(CONFIG_CMD_SLEEP) += sleep.o diff --git a/commands/memtest.c b/commands/memtest.c new file mode 100644 index 0000000..c31e553 --- /dev/null +++ b/commands/memtest.c @@ -0,0 +1,698 @@ +/* + * memtest - Perform a memory test + * + * (C) Copyright 2013 + * Alexander Aring + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static const vu_long bitpattern[] = { + 0x00000001, /* single bit */ + 0x00000003, /* two adjacent bits */ + 0x00000007, /* three adjacent bits */ + 0x0000000F, /* four adjacent bits */ + 0x00000005, /* two non-adjacent bits */ + 0x00000015, /* three non-adjacent bits */ + 0x00000055, /* four non-adjacent bits */ + 0xAAAAAAAA, /* alternating 1/0 */ +}; + +/* + * In CONFIG_MMU we have a special c flag. + */ +#ifdef CONFIG_MMU +static char optstr[] = "s:e:i:cb"; + +/* + * PTE flags variables to set cached and + * uncached regions. + */ +static uint32_t PTE_FLAGS_CACHED; +static uint32_t PTE_FLAGS_UNCACHED; +#else +static char optstr[] = "s:e:i:b"; +#endif + +/* + * Perform a memory test. The complete test + * loops until interrupted by ctrl-c. + */ +static int mem_test(vu_long _start, vu_long _end, + int bus_only) +{ + vu_long *start = (vu_long *)_start; + /* Point the dummy to start[1] */ + vu_long *dummy = start+1; + + vu_long val; + vu_long readback; + vu_long offset; + vu_long pattern; + vu_long test_offset; + vu_long temp; + vu_long anti_pattern; + vu_long num_words; + + int i; + int ret; + + if (!IS_ALIGNED(_end - _start + 1, sizeof(vu_long))) { + printf("Testing memarea size (0x%08lx) not a multiple" + "of size 0x%x, please change start or end address.", + _end - _start + 1, sizeof(vu_long)); + return -1; + } + + num_words = (_end - _start + 1)/sizeof(vu_long); + + printf("Starting data line test.\n"); + + /* + * Data line test: write a pattern to the first + * location, write the 1's complement to a 'parking' + * address (changes the state of the data bus so a + * floating bus doen't give a false OK), and then + * read the value back. Note that we read it back + * into a variable because the next time we read it, + * it might be right (been there, tough to explain to + * the quality guys why it prints a failure when the + * "is" and "should be" are obviously the same in the + * error message). + * + * Rather than exhaustively testing, we test some + * patterns by shifting '1' bits through a field of + * '0's and '0' bits through a field of '1's (i.e. + * pattern and ~pattern). + */ + for (i = 0; i < sizeof(bitpattern)/ + sizeof(bitpattern[0]); i++) { + ret = address_in_sdram_regions((vu_long)start); + if (ret) { + printf("WARNING (data line): " + "address 0x%08lx is in sdram regions.\n" + "Will skip this memory address.\n", + (vu_long)start); + break; + } + + ret = address_in_sdram_regions((vu_long)dummy); + if (ret) { + printf("WARNING (data line): " + "address 0x%08lx is in sdram regions.\n" + "Will skip this memory address.\n", + (vu_long)dummy); + break; + } + + val = bitpattern[i]; + + for (; val != 0; val <<= 1) { + *start = val; + /* clear the test data off of the bus */ + *dummy = ~val; + readback = *start; + + if (readback != val) { + printf("FAILURE (data line): " + "expected 0x%08lx, actual 0x%08lx at address 0x%08lx.\n", + val, readback, (vu_long)start); + return -1; + } + + *start = ~val; + *dummy = val; + readback = *start; + if (readback != ~val) { + printf("FAILURE (data line): " + "Is 0x%08lx, should be 0x%08lx at address 0x%08lx.\n", + readback, + ~val, (vu_long)start); + return -1; + } + } + } + + + /* + * Based on code whose Original Author and Copyright + * information follows: Copyright (c) 1998 by Michael + * Barr. This software is placed into the public + * domain and may be used for any purpose. However, + * this notice must not be changed or removed and no + * warranty is either expressed or implied by its + * publication or distribution. + */ + + /* + * Address line test + * + * Description: Test the address bus wiring in a + * memory region by performing a walking + * 1's test on the relevant bits of the + * address and checking for aliasing. + * This test will find single-bit + * address failures such as stuck -high, + * stuck-low, and shorted pins. The base + * address and size of the region are + * selected by the caller. + * + * Notes: For best results, the selected base + * address should have enough LSB 0's to + * guarantee single address bit changes. + * For example, to test a 64-Kbyte + * region, select a base address on a + * 64-Kbyte boundary. Also, select the + * region size as a power-of-two if at + * all possible. + * + * ## NOTE ## Be sure to specify start and end + * addresses such that num_words has + * lots of bits set. For example an + * address range of 01000000 02000000 is + * bad while a range of 01000000 + * 01ffffff is perfect. + */ + + pattern = 0xAAAAAAAA; + anti_pattern = 0x55555555; + + /* + * Write the default pattern at each of the + * power-of-two offsets. + */ + for (offset = 1; (offset & num_words) != 0; offset <<= 1) { + ret = address_in_sdram_regions((vu_long)&start[offset]); + if (ret) { + printf("WARNING (stuck high): " + "address 0x%08lx is in sdram regions.\n", + (vu_long)&start[offset]); + continue; + } + + start[offset] = pattern; + } + + printf("Check for address bits stuck high.\n"); + + /* + * Check for address bits stuck high. + */ + test_offset = 0; + + ret = address_in_sdram_regions((vu_long)&start[test_offset]); + if (ret) + printf("WARNING (stuck high): " + "address 0x%08lx is in sdram regions.\n", + (vu_long)&start[test_offset]); + else + start[test_offset] = anti_pattern; + + for (offset = 1; (offset & num_words) != 0; offset <<= 1) { + ret = address_in_sdram_regions((vu_long)&start[offset]); + if (ret) { + printf("WARNING (stuck high): " + "address 0x%08lx is in sdram regions.\n", + (vu_long)&start[offset]); + continue; + } + + temp = start[offset]; + + if (temp != pattern) { + printf("FAILURE: Address bit " + "stuck high @ 0x%08lx:" + " expected 0x%08lx, actual 0x%08lx.\n", + (vu_long)&start[offset], + pattern, temp); + return -1; + } + } + + ret = address_in_sdram_regions((vu_long)&start[test_offset]); + if (ret) + printf("WARNING (stuck high): " + "address 0x%08lx is in sdram regions.\n", + (vu_long)&start[test_offset]); + else + start[test_offset] = pattern; + + printf("Check for address bits stuck " + "low or shorted."); + + /* + * Check for address bits stuck low or shorted. + */ + for (test_offset = 1; + (test_offset & num_words) != 0; + test_offset <<= 1) { + ret = address_in_sdram_regions( + (vu_long)&start[test_offset]); + if (ret) { + printf("\nWARNING (low high): " + "address 0x%08lx is in barebox regions.\n", + (vu_long)&start[test_offset]); + continue; + } + + start[test_offset] = anti_pattern; + + for (offset = 1; (offset & num_words) != 0; offset <<= 1) { + ret = address_in_sdram_regions( + (vu_long)&start[offset]); + if (ret) { + printf("\nWARNING (low high): " + "address 0x%08lx is in barebox regions.\n", + (vu_long)&start[test_offset]); + continue; + } + + temp = start[offset]; + + if ((temp != pattern) && + (offset != test_offset)) { + printf("\nFAILURE: Address bit stuck" + " low or shorted @" + " 0x%08lx: expected 0x%08lx, actual 0x%08lx.\n", + (vu_long)&start[offset], + pattern, temp); + return -1; + } + } + start[test_offset] = pattern; + } + + /* We tested only the bus if != 0 + * leaving here */ + if (bus_only) + return 0; + + printf("\nStarting integrity check of physicaly ram.\n" + "Filling ram with patterns...\n"); + + /* + * Description: Test the integrity of a physical + * memory device by performing an + * increment/decrement test over the + * entire region. In the process every + * storage bit in the device is tested + * as a zero and a one. The base address + * and the size of the region are + * selected by the caller. + */ + + /* + * Fill memory with a known pattern. + */ + init_progression_bar(num_words); + for (offset = 0; offset < num_words; offset++) { + if (!(offset & 0xfff)) { + if (ctrlc()) + return -EINTR; + show_progress(offset); + } + + ret = address_in_sdram_regions((vu_long)&start[offset]); + if (ret) + continue; + + start[offset] = offset + 1; + } + + show_progress(offset); + + printf("\nCompare written patterns...\n"); + + /* + * Check each location and invert it for the second pass. + */ + init_progression_bar(num_words - 1); + for (offset = 0; offset < num_words; offset++) { + if (!(offset & 0xfff)) { + if (ctrlc()) + return -EINTR; + show_progress(offset); + } + + ret = address_in_sdram_regions((vu_long)&start[offset]); + if (ret) + continue; + + temp = start[offset]; + if (temp != (offset + 1)) { + printf("\nFAILURE (read/write) @ 0x%08lx:" + " expected 0x%08lx, actual 0x%08lx.\n", + (vu_long)&start[offset], + (offset + 1), temp); + return -1; + } + + anti_pattern = ~(offset + 1); + start[offset] = anti_pattern; + } + + show_progress(offset); + + printf("\nFilling ram with inverted pattern and compare it...\n"); + + /* + * Check each location for the inverted pattern and zero it. + */ + init_progression_bar(num_words - 1); + for (offset = 0; offset < num_words; offset++) { + if (!(offset & 0xfff)) { + if (ctrlc()) + return -EINTR; + show_progress(offset); + } + + ret = address_in_sdram_regions((vu_long)&start[offset]); + /* Step over barebox mem usage */ + if (ret) + continue; + + anti_pattern = ~(offset + 1); + temp = start[offset]; + + if (temp != anti_pattern) { + printf("\nFAILURE (read/write): @ 0x%08lx:" + " expected 0x%08lx, actual 0x%08lx.\n", + (vu_long)&start[offset], + anti_pattern, temp); + return -1; + } + + start[offset] = 0; + } + + show_progress(offset); + + return 0; +} + +#ifdef CONFIG_MMU +static void print_region(vu_long start, vu_long size, uint32_t flags) +{ + if (!size) + return; + + printf("\t0x%08lx - " + "0x%08lx (size 0x%08lx)\n", + start, start + size - 1, size); +} + +static void do_remap_range(struct memory_bank *bank, uint32_t flags) +{ + struct resource *r = NULL; + struct resource *r_prev = NULL; + + vu_long size; + vu_long start; + vu_long end; + + if (flags == PTE_FLAGS_UNCACHED) + printf("Set non caching regions:\n"); + else if (flags == PTE_FLAGS_CACHED) + printf("Set caching regions:\n"); + else + BUG(); + + /* We assume that the regions are sorted in this list */ + list_for_each_entry(r, &bank->res->children, sibling) { + /* Do on head element for bank boundary */ + if (r->sibling.prev == &bank->res->children) { + /* remember last used element */ + r_prev = r; + + start = PAGE_ALIGN(bank->start); + end = PAGE_ALIGN_DOWN(r->start) - 1; + if (start >= end) + continue; + size = end - start + 1; + + print_region(start, size, flags); + remap_range((void *)start, size, flags); + + continue; + } + /* Between used regions */ + start = PAGE_ALIGN(r_prev->end); + end = PAGE_ALIGN_DOWN(r->start) - 1; + if (start < end) { + size = end - start + 1; + print_region(start, size, flags); + remap_range((void *)start, size, flags); + } + + r_prev = r; + /* Do on head element for bank boundary */ + if (list_is_last(&r->sibling, &bank->res->children)) { + start = PAGE_ALIGN(r->end); + end = PAGE_ALIGN_DOWN(bank->start + bank->size) - 1; + if (start >= end) + continue; + size = end - start + 1; + + print_region(start, size, flags); + remap_range((void *)start, size, flags); + } + } +} +#endif + +static int do_mem_memtest(int argc, char *argv[]) +{ + /* Set start address to 0xffffffff which + * can't be. */ + vu_long start = 0xffffffff; + vu_long end = 0; + + uint i; + uint max_i = 1; + +#ifdef CONFIG_MMU + int cache = 0; +#endif + int bus_only = 0; + int err = 0; + int cnt = 0; + int opt; + + struct memory_bank *bank = NULL; + struct resource *r = NULL; + + while ((opt = getopt(argc, argv, optstr)) > 0) { + switch (opt) { + case 's': + start = simple_strtoul(optarg, NULL, 0); + break; + case 'e': + end = simple_strtoul(optarg, NULL, 0); + break; + case 'i': + max_i = simple_strtoul(optarg, NULL, 0); + break; +#ifdef CONFIG_MMU + case 'c': + cache = 1; + break; +#endif + case 'b': + bus_only = 1; + break; + default: + return COMMAND_ERROR_USAGE; + } + } + + if (optind > argc) + return COMMAND_ERROR_USAGE; + + /* Error if no end address */ + if (start != 0xffffffff && !end) { + printf("Please add an end address.\n"); + return 1; + } + + /* Error if no start address */ + if (end && start == 0xffffffff) { + printf("Please add a start address.\n"); + return 1; + } + + /* Check parameters */ + if (start != 0xffffffff && end) { + if (end <= start) { + printf("End address less than or" + " equal start address.\n"); + return 1; + } + + /* Check if given start and end address are in any banks */ + for_each_memory_bank(bank) { + if (ADDRESS_IN_REGIONS(start, bank->start, + bank->start + bank->size)) + cnt++; + + if (ADDRESS_IN_REGIONS(end, bank->start, + bank->start + bank->size)) + cnt++; + } + + if (cnt != 2) { + printf("Start or end addresses are" + " not in any ram bank.\n"); + return 1; + } + } + +#ifdef CONFIG_MMU + /* + * Get pte flags. Which are configured at + * runtime at booting. + */ + PTE_FLAGS_CACHED = mmu_get_pte_cached_flags(); + PTE_FLAGS_UNCACHED = mmu_get_pte_uncached_flags(); +#endif + + printf("Skipping regions:\n"); + for_each_memory_bank(bank) { + list_for_each_entry(r, &bank->res->children, sibling) + printf("\t0x%08x - " + "0x%08x (size 0x%08x) %s\n", + r->start, r->end, + r->end - r->start + 1, r->name); +#ifdef CONFIG_MMU + /* Disable or enable caching */ + if (cache) + do_remap_range(bank, PTE_FLAGS_CACHED); + else + do_remap_range(bank, PTE_FLAGS_UNCACHED); +#endif + } + + /* Do test if we set a start or end address */ + if (start != 0xffffffff && end) { + printf("Testing address range:\n\t0x%08lx - 0x%08lx" + " (size 0x%08lx)\n", + start, end, end - start + 1); + + for (i = 1; (i <= max_i) || !max_i; i++) { + printf("Iteration: %u\n", i); + + /* Do the memtest */ + err = mem_test(start, end, bus_only); + if (err == -EINTR) { + printf("\nTest interrupted.\n"); + goto err; + } + + if (err < 0) { + printf("\nTest failed.\n"); + goto err; + } + printf("\nTested %u iteration(s) without errors.\n", i); + } +#ifdef CONFIG_MMU + /* Renable caching */ + if (!cache) + for_each_memory_bank(bank) + do_remap_range(bank, PTE_FLAGS_CACHED); +#endif + printf("Memtest done.\n"); + + return 0; + } + + /* If we set no start or end address + * we do the test on all ram banks */ + for (i = 1; (i <= max_i) || !max_i; i++) { + for_each_memory_bank(bank) { + start = bank->start; + end = bank->start + bank->size - 1; + + printf("Iteration: %u\n", i); + + printf("Testing address range:\n\t0x%08lx - " + "0x%08lx (size 0x%08lx) on bank /dev/%s\n", + start, end, bank->size, + bank->res->name); + + err = mem_test(start, end, bus_only); + if (err == -EINTR) { + printf("\nTest interrupted.\n"); + goto err; + } + + if (err < 0) { + printf("\nTest on bank /dev/%s failed.\n", + bank->res->name); + goto err; + } + printf("\nTested %u iteration(s) without errors.\n", i); + } + } +#ifdef CONFIG_MMU + /* Renable caching */ + if (!cache) + for_each_memory_bank(bank) + do_remap_range(bank, PTE_FLAGS_CACHED); +#endif + printf("Memtest done.\n"); + + return 0; + +err: +#ifdef CONFIG_MMU + /* Enable caching */ + for_each_memory_bank(bank) + do_remap_range(bank, PTE_FLAGS_CACHED); +#endif + + return 1; +} + +static const __maybe_unused char cmd_memtest_help[] = +"Usage: memtest [OPTION]...\n" +"memtest related commands\n" +" -s start address to begin memtest.\n" +" -e end address to stop memtest.\n" +" -i iterations [default=1, endless=0].\n" +#ifdef CONFIG_MMU +" -c run test with enable cache.\n" +#endif +" -b only test bus datalines."; + +BAREBOX_CMD_START(memtest) + .cmd = do_mem_memtest, + .usage = "Memory Test", + BAREBOX_CMD_HELP(cmd_memtest_help) +BAREBOX_CMD_END -- 1.8.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox