From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from 2.mo5.mail-out.ovh.net ([178.33.109.111] helo=mo5.mail-out.ovh.net) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TxEcQ-0003Np-M3 for barebox@lists.infradead.org; Mon, 21 Jan 2013 10:29:00 +0000 Received: from mail609.ha.ovh.net (b7.ovh.net [213.186.33.57]) by mo5.mail-out.ovh.net (Postfix) with SMTP id A90D5FFA927 for ; Mon, 21 Jan 2013 11:38:31 +0100 (CET) From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 21 Jan 2013 11:27:16 +0100 Message-Id: <1358764040-10690-6-git-send-email-plagnioj@jcrosoft.com> In-Reply-To: <1358764040-10690-1-git-send-email-plagnioj@jcrosoft.com> References: <20130121102319.GE26329@game.jcrosoft.org> <1358764040-10690-1-git-send-email-plagnioj@jcrosoft.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 06/10] at91: sam926x: switch lowlevel param to c code To: barebox@lists.infradead.org Instead of hardcode define use a struct that the board fill Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- arch/arm/boards/at91sam9263ek/Makefile | 5 + arch/arm/boards/at91sam9263ek/config.h | 99 +------------- arch/arm/boards/at91sam9263ek/lowlevel_init.c | 104 +++++++++++++++ arch/arm/boards/mmccpu/Makefile | 5 + arch/arm/boards/mmccpu/config.h | 130 +------------------ arch/arm/boards/mmccpu/lowlevel_init.c | 135 ++++++++++++++++++++ arch/arm/boards/pm9261/Makefile | 5 + arch/arm/boards/pm9261/config.h | 99 +------------- arch/arm/boards/pm9261/lowlevel_init.c | 102 +++++++++++++++ arch/arm/boards/pm9263/Makefile | 5 + arch/arm/boards/pm9263/config.h | 115 +---------------- arch/arm/boards/pm9263/lowlevel_init.c | 121 ++++++++++++++++++ arch/arm/mach-at91/at91sam926x_lowlevel_init.c | 64 ++++++---- .../mach-at91/include/mach/at91_lowlevel_init.h | 33 +++++ 14 files changed, 580 insertions(+), 442 deletions(-) rewrite arch/arm/boards/at91sam9263ek/config.h (95%) create mode 100644 arch/arm/boards/at91sam9263ek/lowlevel_init.c rewrite arch/arm/boards/mmccpu/config.h (97%) create mode 100644 arch/arm/boards/mmccpu/lowlevel_init.c rewrite arch/arm/boards/pm9261/config.h (95%) create mode 100644 arch/arm/boards/pm9261/lowlevel_init.c rewrite arch/arm/boards/pm9263/config.h (97%) create mode 100644 arch/arm/boards/pm9263/lowlevel_init.c create mode 100644 arch/arm/mach-at91/include/mach/at91_lowlevel_init.h diff --git a/arch/arm/boards/at91sam9263ek/Makefile b/arch/arm/boards/at91sam9263ek/Makefile index eb072c0..aecbc5a 100644 --- a/arch/arm/boards/at91sam9263ek/Makefile +++ b/arch/arm/boards/at91sam9263ek/Makefile @@ -1 +1,6 @@ obj-y += init.o + +lowlevel_init-y = lowlevel_init.o +obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y) + +pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y) diff --git a/arch/arm/boards/at91sam9263ek/config.h b/arch/arm/boards/at91sam9263ek/config.h dissimilarity index 95% index 14eb4fe..cc12040 100644 --- a/arch/arm/boards/at91sam9263ek/config.h +++ b/arch/arm/boards/at91sam9263ek/config.h @@ -1,93 +1,6 @@ -#ifndef __CONFIG_H -#define __CONFIG_H - -#define AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ - -#define MASTER_PLL_MUL 171 -#define MASTER_PLL_DIV 14 - -/* clocks */ -#define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOSCEN | \ - (255 << 8)) /* Main Oscillator Start-up Time */ -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ - AT91_PMC_OUT | \ - AT91_PMC_PLLCOUNT | /* PLL Counter */ \ - (2 << 28) | /* PLL Clock Frequency Range */ \ - ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) - -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_SLOW | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) - -/* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 -/* no pull-up for D[31:16] */ -#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 -/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ -#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \ - (AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V | \ - AT91_MATRIX_EBI0_CS1A_SDRAMC) - -/* SDRAM */ -/* SDRAMC_TR - Refresh Timer register */ -#define CONFIG_SYS_SDRC_TR_VAL1 0x13C -/* SDRAMC_CR - Configuration register*/ -#define CONFIG_SYS_SDRC_CR_VAL \ - (AT91_SDRAMC_NC_9 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_3 | \ - AT91_SDRAMC_DBW_32 | \ - (1 << 8) | /* Write Recovery Delay */ \ - (7 << 12) | /* Row Cycle Delay */ \ - (2 << 16) | /* Row Precharge Delay */ \ - (2 << 20) | /* Row to Column Delay */ \ - (5 << 24) | /* Active to Precharge Delay */ \ - (1 << 28)) /* Exit Self Refresh to Active Delay */ - -/* Memory Device Register -> SDRAM */ -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ - -/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ -#define CONFIG_SYS_SMC_CS 0 -#define CONFIG_SYS_SMC_SETUP_VAL \ - (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \ - AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10)) -#define CONFIG_SYS_SMC_PULSE_VAL \ - (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \ - AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11)) -#define CONFIG_SYS_SMC_CYCLE_VAL \ - (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22)) -#define CONFIG_SYS_SMC_MODE_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(6)) - -/* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ - (AT91_RSTC_KEY | \ - AT91_RSTC_PROCRST | \ - AT91_RSTC_RSTTYP_WAKEUP | \ - AT91_RSTC_RSTTYP_WATCHDOG) - -/* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ - AT91_WDT_WDV | \ - AT91_WDT_WDDIS | \ - AT91_WDT_WDD) - -#endif /* __CONFIG_H */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ + +#endif /* __CONFIG_H */ diff --git a/arch/arm/boards/at91sam9263ek/lowlevel_init.c b/arch/arm/boards/at91sam9263ek/lowlevel_init.c new file mode 100644 index 0000000..2f8b312 --- /dev/null +++ b/arch/arm/boards/at91sam9263ek/lowlevel_init.c @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD + * + * Under GPLv2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MASTER_PLL_MUL 171 +#define MASTER_PLL_DIV 14 + +void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg) +{ + /* Disable Watchdog */ + cfg->wdt_mr = + AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | + AT91_WDT_WDV | + AT91_WDT_WDDIS | + AT91_WDT_WDD; + + /* define PDC[31:16] as DATA[31:16] */ + cfg->ebi_pio_pdr = 0xFFFF0000; + /* no pull-up for D[31:16] */ + cfg->ebi_pio_ppudr = 0xFFFF0000; + /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ + cfg->ebi_csa = + AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V | + AT91_MATRIX_EBI0_CS1A_SDRAMC; + + cfg->smc_cs = 0; + cfg->smc_mode = + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_DBW_16 | + AT91_SMC_TDFMODE | + AT91_SMC_TDF_(6); + cfg->smc_cycle = + AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22); + cfg->smc_pulse = + AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | + AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11); + cfg->smc_setup = + AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | + AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10); + + cfg->pmc_mor = + AT91_PMC_MOSCEN | + (255 << 8); /* Main Oscillator Start-up Time */ + cfg->pmc_pllar = + AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ + AT91_PMC_OUT | + AT91_PMC_PLLCOUNT | /* PLL Counter */ + (2 << 28) | /* PLL Clock Frequency Range */ + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV); + /* PCK/2 = MCK Master Clock from PLLA */ + cfg->pmc_mckr1 = + AT91_PMC_CSS_SLOW | + AT91_PMC_PRES_1 | + AT91SAM9_PMC_MDIV_2 | + AT91_PMC_PDIV_1; + /* PCK/2 = MCK Master Clock from PLLA */ + cfg->pmc_mckr2 = + AT91_PMC_CSS_PLLA | + AT91_PMC_PRES_1 | + AT91SAM9_PMC_MDIV_2 | + AT91_PMC_PDIV_1; + + /* SDRAM */ + /* SDRAMC_TR - Refresh Timer register */ + cfg->sdrc_tr1 = 0x13C; + /* SDRAMC_CR - Configuration register*/ + cfg->sdrc_cr = + AT91_SDRAMC_NC_9 | + AT91_SDRAMC_NR_13 | + AT91_SDRAMC_NB_4 | + AT91_SDRAMC_CAS_3 | + AT91_SDRAMC_DBW_32 | + (1 << 8) | /* Write Recovery Delay */ + (7 << 12) | /* Row Cycle Delay */ + (2 << 16) | /* Row Precharge Delay */ + (2 << 20) | /* Row to Column Delay */ + (5 << 24) | /* Active to Precharge Delay */ + (1 << 28); /* Exit Self Refresh to Active Delay */ + + /* Memory Device Register -> SDRAM */ + cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM; + /* SDRAM_TR */ + cfg->sdrc_tr2 = 1200; + + /* user reset enable */ + cfg->rstc_rmr = + AT91_RSTC_KEY | + AT91_RSTC_PROCRST | + AT91_RSTC_RSTTYP_WAKEUP | + AT91_RSTC_RSTTYP_WATCHDOG; +} diff --git a/arch/arm/boards/mmccpu/Makefile b/arch/arm/boards/mmccpu/Makefile index eb072c0..aecbc5a 100644 --- a/arch/arm/boards/mmccpu/Makefile +++ b/arch/arm/boards/mmccpu/Makefile @@ -1 +1,6 @@ obj-y += init.o + +lowlevel_init-y = lowlevel_init.o +obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y) + +pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y) diff --git a/arch/arm/boards/mmccpu/config.h b/arch/arm/boards/mmccpu/config.h dissimilarity index 97% index e6215dc..c896a93 100644 --- a/arch/arm/boards/mmccpu/config.h +++ b/arch/arm/boards/mmccpu/config.h @@ -1,124 +1,6 @@ -#ifndef __CONFIG_H -#define __CONFIG_H - -#define AT91_MAIN_CLOCK 18432000 - -/* values */ -#define MASTER_PLL_MUL 54 -#define MASTER_PLL_DIV 4 - -/* clocks */ -#define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOSCEN | \ - (255 << 8)) /* Main Oscillator Start-up Time */ -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ - AT91_PMC_OUT | \ - AT91_PMC_PLLCOUNT | /* PLL Counter */ \ - (2 << 28) | /* PLL Clock Frequency Range */ \ - ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) - -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_SLOW | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) - -/* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 -/* no pull-up for D[31:16] */ -#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 -/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 1.8V memories */ -#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \ - (AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_1_8V | \ - AT91_MATRIX_EBI0_CS1A_SDRAMC | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA) - -/* SDRAM */ -/* SDRAMC_TR - Refresh Timer register */ -#define CONFIG_SYS_SDRC_TR_VAL1 0x13c -/* SDRAMC_CR - Configuration register*/ -#define CONFIG_SYS_SDRC_CR_VAL \ - (AT91_SDRAMC_NC_9 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_3 | \ - AT91_SDRAMC_DBW_32 | \ - (2 << 8) | /* tWR - Write Recovery Delay */ \ - (8 << 12) | /* tRC - Row Cycle Delay */ \ - (2 << 16) | /* tRP - Row Precharge Delay */ \ - (2 << 20) | /* tRCD - Row to Column Delay */ \ - (5 << 24) | /* tRAS - Active to Precharge Delay */ \ - (12 << 28)) /* tXSR - Exit Self Refresh to Active Delay */ - -/* Memory Device Register -> SDRAM */ -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_TR_VAL2 780 /* SDRAM_TR */ - -/* setup CS0 (NOR Flash) - 16-bit */ -#define CONFIG_SYS_SMC_CS 0 -#if 1 -#define CONFIG_SYS_SMC_SETUP_VAL \ - (AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(2) | \ - AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0)) -#define CONFIG_SYS_SMC_PULSE_VAL \ - (AT91_SMC_NWEPULSE_(5) | AT91_SMC_NCS_WRPULSE_(7) | \ - AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(13)) -#define CONFIG_SYS_SMC_CYCLE_VAL \ - (AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)) -#define CONFIG_SYS_SMC_MODE_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(6)) -#elif 0 /* slow setup */ -#define CONFIG_SYS_SMC_SETUP_VAL \ - (AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(2) | \ - AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0)) -#define CONFIG_SYS_SMC_PULSE_VAL \ - (AT91_SMC_NWEPULSE_(5) | AT91_SMC_NCS_WRPULSE_(7) | \ - AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(13)) -#define CONFIG_SYS_SMC_CYCLE_VAL \ - (AT91_SMC_NWECYCLE_(0xd00) | AT91_SMC_NRDCYCLE_(0xd00)) -#define CONFIG_SYS_SMC_MODE_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(1)) -#else /* RONETIX' original values */ -#define CONFIG_SYS_SMC_SETUP_VAL \ - (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \ - AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10)) -#define CONFIG_SYS_SMC_PULSE_VAL \ - (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \ - AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11)) -#define CONFIG_SYS_SMC_CYCLE_VAL \ - (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22)) -#define CONFIG_SYS_SMC_MODE_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(6)) -#endif - -/* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ - (AT91_RSTC_KEY | \ - AT91_RSTC_PROCRST | \ - AT91_RSTC_RSTTYP_WAKEUP | \ - AT91_RSTC_RSTTYP_WATCHDOG) - -/* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ - AT91_WDT_WDV | \ - AT91_WDT_WDDIS | \ - AT91_WDT_WDD) - -#endif /* __CONFIG_H */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define AT91_MAIN_CLOCK 18432000 + +#endif /* __CONFIG_H */ diff --git a/arch/arm/boards/mmccpu/lowlevel_init.c b/arch/arm/boards/mmccpu/lowlevel_init.c new file mode 100644 index 0000000..68c609f --- /dev/null +++ b/arch/arm/boards/mmccpu/lowlevel_init.c @@ -0,0 +1,135 @@ +/* + * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD + * + * Under GPLv2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MASTER_PLL_MUL 54 +#define MASTER_PLL_DIV 4 + +void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg) +{ + /* Disable Watchdog */ + cfg->wdt_mr = + AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | + AT91_WDT_WDV | + AT91_WDT_WDDIS | + AT91_WDT_WDD; + + /* define PDC[31:16] as DATA[31:16] */ + cfg->ebi_pio_pdr = 0xFFFF0000; + /* no pull-up for D[31:16] */ + cfg->ebi_pio_ppudr = 0xFFFF0000; + /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ + cfg->ebi_csa = + AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_1_8V | + AT91_MATRIX_EBI0_CS1A_SDRAMC | + AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA; + + cfg->smc_cs = 0; +#if 1 + cfg->smc_mode = + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_DBW_16 | + AT91_SMC_TDFMODE | + AT91_SMC_TDF_(6); + cfg->smc_cycle = + AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16); + cfg->smc_pulse = + AT91_SMC_NWEPULSE_(5) | AT91_SMC_NCS_WRPULSE_(7) | + AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(13); + cfg->smc_setup = + AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(2) | + AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0); +#elif 0 /* slow setup */ + cfg->smc_mode = + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_DBW_16 | + AT91_SMC_TDFMODE | + AT91_SMC_TDF_(1); + cfg->smc_cycle = + AT91_SMC_NWECYCLE_(0xd00) | AT91_SMC_NRDCYCLE_(0xd00); + cfg->smc_pulse = + AT91_SMC_NWEPULSE_(5) | AT91_SMC_NCS_WRPULSE_(7) | + AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(13); + cfg->smc_setup = + AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(2) | + AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0); +#else /* RONETIX' original values */ + cfg->smc_mode = + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_DBW_16 | + AT91_SMC_TDFMODE | + AT91_SMC_TDF_(6); + cfg->smc_cycle = + AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22); + cfg->smc_pulse = + AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | + AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11); + cfg->smc_setup = + AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | + AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10); +#endif + + cfg->pmc_mor = + AT91_PMC_MSCEN | + (255 << 8); /* Main Oscillator Start-up Time */ + cfg->pmc_pllar = + AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ + AT91_PMC_OUT | + AT91_PMC_PLLCOUNT | /* PLL Counter */ + (2 << 28) | /* PLL Clock Frequency Range */ + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV); + /* PCK/2 = MCK Master Clock from PLLA */ + cfg->pmc_mckr1 = + AT91_PMC_CSS_SLOW | + AT91_PMC_PRES_1 | + AT91SAM9_PMC_MDIV_2 | + AT91_PMC_PDIV_1; + /* PCK/2 = MCK Master Clock from PLLA */ + cfg->pmc_mckr2 = + AT91_PMC_CSS_PLLA | + AT91_PMC_PRES_1 | + AT91SAM9_PMC_MDIV_2 | + AT91_PMC_PDIV_1; + + /* SDRAM */ + /* SDRAMC_TR - Refresh Timer register */ + cfg->sdrc_tr1 = 0x13C; + /* SDRAMC_CR - Configuration register*/ + cfg->sdrc_cr = + AT91_SDRAMC_NC_9 | + AT91_SDRAMC_NR_13 | + AT91_SDRAMC_NB_4 | + AT91_SDRAMC_CAS_3 | + AT91_SDRAMC_DBW_32 | + (2 << 8) | /* tWR - Write Recovery Delay */ + (8 << 12) | /* tRC - Row Cycle Delay */ + (2 << 16) | /* tRP - Row Precharge Delay */ + (2 << 20) | /* tRCD - Row to Column Delay */ + (5 << 24) | /* tRAS - Active to Precharge Delay */ + (12 << 28); /* tXSR - Exit Self Refresh to Active Delay */ + + /* Memory Device Register -> SDRAM */ + cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM; + /* SDRAM_TR */ + cfg->sdrc_tr2 = 780; + + /* user reset enable */ + cfg->rstc_rmr = + AT91_RSTC_KEY | + AT91_RSTC_PROCRST | + AT91_RSTC_RSTTYP_WAKEUP | + AT91_RSTC_RSTTYP_WATCHDOG; +} diff --git a/arch/arm/boards/pm9261/Makefile b/arch/arm/boards/pm9261/Makefile index eb072c0..aecbc5a 100644 --- a/arch/arm/boards/pm9261/Makefile +++ b/arch/arm/boards/pm9261/Makefile @@ -1 +1,6 @@ obj-y += init.o + +lowlevel_init-y = lowlevel_init.o +obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y) + +pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y) diff --git a/arch/arm/boards/pm9261/config.h b/arch/arm/boards/pm9261/config.h dissimilarity index 95% index 4602aa7..006820c 100644 --- a/arch/arm/boards/pm9261/config.h +++ b/arch/arm/boards/pm9261/config.h @@ -1,93 +1,6 @@ -#ifndef __CONFIG_H -#define __CONFIG_H - -#define AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ - -#define MASTER_PLL_DIV 15 -#define MASTER_PLL_MUL 162 -#define MAIN_PLL_DIV 2 - -/* clocks */ -#define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOSCEN | \ - (255 << 8)) /* Main Oscillator Start-up Time */ -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ - AT91_PMC_OUT | \ - ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) - -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_SLOW | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) - -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) - -/* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 -/* no pull-up for D[31:16] */ -#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 - -/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ -#define CONFIG_SYS_MATRIX_EBICSA_VAL \ - (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC) - -/* SDRAM */ -/* SDRAMC_TR - Refresh Timer register */ -#define CONFIG_SYS_SDRC_TR_VAL1 0x13C -/* SDRAMC_CR - Configuration register*/ -#define CONFIG_SYS_SDRC_CR_VAL \ - (AT91_SDRAMC_NC_9 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_3 | \ - AT91_SDRAMC_DBW_32 | \ - (1 << 8) | /* Write Recovery Delay */ \ - (7 << 12) | /* Row Cycle Delay */ \ - (3 << 16) | /* Row Precharge Delay */ \ - (2 << 20) | /* Row to Column Delay */ \ - (5 << 24) | /* Active to Precharge Delay */ \ - (1 << 28)) /* Exit Self Refresh to Active Delay */ - -/* Memory Device Register -> SDRAM */ -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ - -/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ -#define CONFIG_SYS_SMC_CS 0 -#define CONFIG_SYS_SMC_SETUP_VAL \ - (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \ - AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10)) -#define CONFIG_SYS_SMC_PULSE_VAL \ - (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \ - AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11)) -#define CONFIG_SYS_SMC_CYCLE_VAL \ - (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22)) -#define CONFIG_SYS_SMC_MODE_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(6)) - -/* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ - (AT91_RSTC_KEY | \ - AT91_RSTC_PROCRST | \ - AT91_RSTC_RSTTYP_WAKEUP | \ - AT91_RSTC_RSTTYP_WATCHDOG) - -/* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ - AT91_WDT_WDV | \ - AT91_WDT_WDDIS | \ - AT91_WDT_WDD) - -#endif /* __CONFIG_H */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ + +#endif /* __CONFIG_H */ diff --git a/arch/arm/boards/pm9261/lowlevel_init.c b/arch/arm/boards/pm9261/lowlevel_init.c new file mode 100644 index 0000000..91a64b4 --- /dev/null +++ b/arch/arm/boards/pm9261/lowlevel_init.c @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD + * + * Under GPLv2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MASTER_PLL_DIV 15 +#define MASTER_PLL_MUL 162 +#define MAIN_PLL_DIV 2 + +void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg) +{ + /* Disable Watchdog */ + cfg->wdt_mr = + AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | + AT91_WDT_WDV | + AT91_WDT_WDDIS | + AT91_WDT_WDD; + + /* define PDC[31:16] as DATA[31:16] */ + cfg->ebi_pio_pdr = 0xFFFF0000; + /* no pull-up for D[31:16] */ + cfg->ebi_pio_ppudr = 0xFFFF0000; + /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ + cfg->ebi_csa = + AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC; + + cfg->smc_cs = 0; + cfg->smc_mode = + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_DBW_16 | + AT91_SMC_TDFMODE | + AT91_SMC_TDF_(6); + cfg->smc_cycle = + AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22); + cfg->smc_pulse = + AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | + AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11); + cfg->smc_setup = + AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | + AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10); + + cfg->pmc_mor = + AT91_PMC_MOSCEN | + (255 << 8); /* Main Oscillator Start-up Time */ + cfg->pmc_pllar = + AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ + AT91_PMC_OUT | + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV); + /* PCK/2 = MCK Master Clock from PLLA */ + cfg->pmc_mckr1 = + AT91_PMC_CSS_SLOW | + AT91_PMC_PRES_1 | + AT91SAM9_PMC_MDIV_2 | + AT91_PMC_PDIV_1; + /* PCK/2 = MCK Master Clock from PLLA */ + cfg->pmc_mckr2 = + AT91_PMC_CSS_PLLA | + AT91_PMC_PRES_1 | + AT91SAM9_PMC_MDIV_2 | + AT91_PMC_PDIV_1; + + /* SDRAM */ + /* SDRAMC_TR - Refresh Timer register */ + cfg->sdrc_tr1 = 0x13C; + /* SDRAMC_CR - Configuration register*/ + cfg->sdrc_cr = + AT91_SDRAMC_NC_9 | + AT91_SDRAMC_NR_13 | + AT91_SDRAMC_NB_4 | + AT91_SDRAMC_CAS_3 | + AT91_SDRAMC_DBW_32 | + (1 << 8) | /* Write Recovery Delay */ + (7 << 12) | /* Row Cycle Delay */ + (3 << 16) | /* Row Precharge Delay */ + (2 << 20) | /* Row to Column Delay */ + (5 << 24) | /* Active to Precharge Delay */ + (1 << 28); /* Exit Self Refresh to Active Delay */ + + /* Memory Device Register -> SDRAM */ + cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM; + /* SDRAM_TR */ + cfg->sdrc_tr2 = 1200; + + /* user reset enable */ + cfg->rstc_rmr = + AT91_RSTC_KEY | + AT91_RSTC_PROCRST | + AT91_RSTC_RSTTYP_WAKEUP | + AT91_RSTC_RSTTYP_WATCHDOG; +} diff --git a/arch/arm/boards/pm9263/Makefile b/arch/arm/boards/pm9263/Makefile index eb072c0..aecbc5a 100644 --- a/arch/arm/boards/pm9263/Makefile +++ b/arch/arm/boards/pm9263/Makefile @@ -1 +1,6 @@ obj-y += init.o + +lowlevel_init-y = lowlevel_init.o +obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y) + +pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y) diff --git a/arch/arm/boards/pm9263/config.h b/arch/arm/boards/pm9263/config.h dissimilarity index 97% index 322c1f3..9066613 100644 --- a/arch/arm/boards/pm9263/config.h +++ b/arch/arm/boards/pm9263/config.h @@ -1,109 +1,6 @@ -#ifndef __CONFIG_H -#define __CONFIG_H - -#define AT91_MAIN_CLOCK 18432000 - -#define MASTER_PLL_DIV 6 -#define MASTER_PLL_MUL 65 -#define MAIN_PLL_DIV 2 /* 2 or 4 */ - -/* clocks */ -#define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOSCEN | \ - (255 << 8)) /* Main Oscillator Start-up Time */ -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ - AT91_PMC_OUT | \ - AT91_PMC_PLLCOUNT | /* PLL Counter */ \ - (2 << 28) | /* PLL Clock Frequency Range */ \ - ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) - -#if (MAIN_PLL_DIV == 2) -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_SLOW | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) -#else -/* PCK/4 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_SLOW | \ - AT91_PMC_PRES_1 | \ - AT91RM9200_PMC_MDIV_3 | \ - AT91_PMC_PDIV_1) -/* PCK/4 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91RM9200_PMC_MDIV_3 | \ - AT91_PMC_PDIV_1) -#endif -/* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 -/* no pull-up for D[31:16] */ -#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 -/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ -#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \ - (AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V | \ - AT91_MATRIX_EBI0_CS1A_SDRAMC) - -/* SDRAM */ -/* SDRAMC_TR - Refresh Timer register */ -#define CONFIG_SYS_SDRC_TR_VAL1 0x3AA -/* SDRAMC_CR - Configuration register*/ -#define CONFIG_SYS_SDRC_CR_VAL \ - (AT91_SDRAMC_NC_9 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_2 | \ - AT91_SDRAMC_DBW_32 | \ - (2 << 8) | /* tWR - Write Recovery Delay */ \ - (7 << 12) | /* tRC - Row Cycle Delay */ \ - (2 << 16) | /* tRP - Row Precharge Delay */ \ - (2 << 20) | /* tRCD - Row to Column Delay */ \ - (5 << 24) | /* tRAS - Active to Precharge Delay */ \ - (8 << 28)) /* tXSR - Exit Self Refresh to Active Delay */ - -/* Memory Device Register -> SDRAM */ -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ - -/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ -#define CONFIG_SYS_SMC_CS 0 -#define CONFIG_SYS_SMC_SETUP_VAL \ - (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \ - AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10)) -#define CONFIG_SYS_SMC_PULSE_VAL \ - (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \ - AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11)) -#define CONFIG_SYS_SMC_CYCLE_VAL \ - (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22)) -#define CONFIG_SYS_SMC_MODE_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(6)) - -/* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ - (AT91_RSTC_KEY | \ - AT91_RSTC_PROCRST | \ - AT91_RSTC_RSTTYP_WAKEUP | \ - AT91_RSTC_RSTTYP_WATCHDOG) - -/* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ - AT91_WDT_WDV | \ - AT91_WDT_WDDIS | \ - AT91_WDT_WDD) - - -#endif /* __CONFIG_H */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define AT91_MAIN_CLOCK 18432000 + +#endif /* __CONFIG_H */ diff --git a/arch/arm/boards/pm9263/lowlevel_init.c b/arch/arm/boards/pm9263/lowlevel_init.c new file mode 100644 index 0000000..6336d51 --- /dev/null +++ b/arch/arm/boards/pm9263/lowlevel_init.c @@ -0,0 +1,121 @@ +/* + * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD + * + * Under GPLv2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MASTER_PLL_DIV 6 +#define MASTER_PLL_MUL 65 +#define MAIN_PLL_DIV 2 /* 2 or 4 */ + +void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg) +{ + /* Disable Watchdog */ + cfg->wdt_mr = + AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | + AT91_WDT_WDV | + AT91_WDT_WDDIS | + AT91_WDT_WDD; + + /* define PDC[31:16] as DATA[31:16] */ + cfg->ebi_pio_pdr = 0xFFFF0000; + /* no pull-up for D[31:16] */ + cfg->ebi_pio_ppudr = 0xFFFF0000; + /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ + cfg->ebi_csa = + AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V | + AT91_MATRIX_EBI0_CS1A_SDRAMC; + + cfg->smc_cs = 0; + cfg->smc_mode = + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_DBW_16 | + AT91_SMC_TDFMODE | + AT91_SMC_TDF_(6); + cfg->smc_cycle = + AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22); + cfg->smc_pulse = + AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | + AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11); + cfg->smc_setup = + AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | + AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10); + + cfg->pmc_mor = + AT91_PMC_MOSCEN | + (255 << 8); /* Main Oscillator Start-up Time */ + cfg->pmc_pllar = + AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ + AT91_PMC_OUT | + AT91_PMC_PLLCOUNT | /* PLL Counter */ + (2 << 28) | /* PLL Clock Frequency Range */ + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV); + + if (MAIN_PLL_DIV == 2) { + /* PCK/2 = MCK Master Clock from PLLA */ + cfg->pmc_mckr1 = + AT91_PMC_CSS_SLOW | + AT91_PMC_PRES_1 | + AT91SAM9_PMC_MDIV_2 | + AT91_PMC_PDIV_1; + /* PCK/2 = MCK Master Clock from PLLA */ + cfg->pmc_mckr2 = + AT91_PMC_CSS_PLLA | + AT91_PMC_PRES_1 | + AT91SAM9_PMC_MDIV_2 | + AT91_PMC_PDIV_1; + } else { + /* PCK/2 = MCK Master Clock from PLLA */ + cfg->pmc_mckr1 = + AT91_PMC_CSS_SLOW | + AT91_PMC_PRES_1 | + AT91RM9200_PMC_MDIV_3 | + AT91_PMC_PDIV_1; + /* PCK/2 = MCK Master Clock from PLLA */ + cfg->pmc_mckr2 = + AT91_PMC_CSS_PLLA | + AT91_PMC_PRES_1 | + AT91RM9200_PMC_MDIV_3 | + AT91_PMC_PDIV_1; + } + + /* SDRAM */ + /* SDRAMC_TR - Refresh Timer register */ + cfg->sdrc_tr1 = 0x3AA; + /* SDRAMC_CR - Configuration register*/ + cfg->sdrc_cr = + AT91_SDRAMC_NC_9 | + AT91_SDRAMC_NR_13 | + AT91_SDRAMC_NB_4 | + AT91_SDRAMC_CAS_2 | + AT91_SDRAMC_DBW_32 | + (2 << 8) | /* tWR - Write Recovery Delay */ + (7 << 12) | /* tRC - Row Cycle Delay */ + (2 << 16) | /* tRP - Row Precharge Delay */ + (2 << 20) | /* tRCD - Row to Column Delay */ + (5 << 24) | /* tRAS - Active to Precharge Delay */ + (8 << 28); /* tXSR - Exit Self Refresh to Active Delay */ + + /* Memory Device Register -> SDRAM */ + cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM; + /* SDRAM_TR */ + cfg->sdrc_tr2 = 1200; + + /* user reset enable */ + cfg->rstc_rmr = + AT91_RSTC_KEY | + AT91_RSTC_PROCRST | + AT91_RSTC_RSTTYP_WAKEUP | + AT91_RSTC_RSTTYP_WATCHDOG; +} diff --git a/arch/arm/mach-at91/at91sam926x_lowlevel_init.c b/arch/arm/mach-at91/at91sam926x_lowlevel_init.c index 4dec275..e7145b4 100644 --- a/arch/arm/mach-at91/at91sam926x_lowlevel_init.c +++ b/arch/arm/mach-at91/at91sam926x_lowlevel_init.c @@ -19,8 +19,10 @@ #include #include #include +#include #include #include +#include static void inline access_sdram(void) { @@ -44,40 +46,41 @@ static int inline running_in_sram(void) return addr == 0; } -void __naked __bare_init reset(void) +void __bare_init at91sam926x_lowlevel_init(void) { u32 r; int i; int in_sram = running_in_sram(); + struct at91sam926x_lowlevel_cfg cfg; - common_reset(); + at91sam926x_lowlevel_board_config(&cfg); - __raw_writel(CONFIG_SYS_WDTC_WDMR_VAL, AT91_BASE_WDT + AT91_WDT_MR); + __raw_writel(cfg.wdt_mr, AT91_BASE_WDT + AT91_WDT_MR); /* configure PIOx as EBI0 D[16-31] */ #ifdef CONFIG_ARCH_AT91SAM9263 - __raw_writel(CONFIG_SYS_PIOD_PDR_VAL1, AT91_BASE_PIOD + PIO_PDR); - __raw_writel(CONFIG_SYS_PIOD_PPUDR_VAL, AT91_BASE_PIOD + PIO_PUDR); - __raw_writel(CONFIG_SYS_PIOD_PPUDR_VAL, AT91_BASE_PIOD + PIO_ASR); + __raw_writel(cfg.ebi_pio_pdr, AT91_BASE_PIOD + PIO_PDR); + __raw_writel(cfg.ebi_pio_ppudr, AT91_BASE_PIOD + PIO_PUDR); + __raw_writel(cfg.ebi_pio_ppudr, AT91_BASE_PIOD + PIO_ASR); #else - __raw_writel(CONFIG_SYS_PIOC_PDR_VAL1, AT91_BASE_PIOC + PIO_PDR); - __raw_writel(CONFIG_SYS_PIOC_PPUDR_VAL, AT91_BASE_PIOC + PIO_PUDR); + __raw_writel(cfg.ebi_pio_pdr, AT91_BASE_PIOC + PIO_PDR); + __raw_writel(cfg.ebi_pio_ppudrL, AT91_BASE_PIOC + PIO_PUDR); #endif #if defined(AT91_MATRIX_EBI0CSA) - at91_sys_write(AT91_MATRIX_EBI0CSA, CONFIG_SYS_MATRIX_EBI0CSA_VAL); + at91_sys_write(AT91_MATRIX_EBI0CSA, cfg.ebi_csa); #else /* AT91_MATRIX_EBICSA */ - at91_sys_write(AT91_MATRIX_EBICSA, CONFIG_SYS_MATRIX_EBICSA_VAL); + at91_sys_write(AT91_MATRIX_EBICSA, cfg.ebi_csa); #endif /* flash */ - at91_smc_write(CONFIG_SYS_SMC_CS, AT91_SMC_MODE, CONFIG_SYS_SMC_MODE_VAL); + at91_smc_write(cfg.smc_cs, AT91_SMC_MODE, cfg.smc_mode); - at91_smc_write(CONFIG_SYS_SMC_CS, AT91_SMC_CYCLE, CONFIG_SYS_SMC_CYCLE_VAL); + at91_smc_write(cfg.smc_cs, AT91_SMC_CYCLE, cfg.smc_cycle); - at91_smc_write(CONFIG_SYS_SMC_CS, AT91_SMC_PULSE, CONFIG_SYS_SMC_PULSE_VAL); + at91_smc_write(cfg.smc_cs, AT91_SMC_PULSE, cfg.smc_pulse); - at91_smc_write(CONFIG_SYS_SMC_CS, AT91_SMC_SETUP, CONFIG_SYS_SMC_SETUP_VAL); + at91_smc_write(cfg.smc_cs, AT91_SMC_SETUP, cfg.smc_setup); /* * PMC Check if the PLL is already initialized @@ -89,7 +92,7 @@ void __naked __bare_init reset(void) /* * Enable the Main Oscillator */ - at91_pmc_write(AT91_CKGR_MOR, CONFIG_SYS_MOR_VAL); + at91_pmc_write(AT91_CKGR_MOR, cfg.pmc_mor); do { r = at91_pmc_read(AT91_PMC_SR); @@ -98,7 +101,7 @@ void __naked __bare_init reset(void) /* * PLLAR: x MHz for PCK */ - at91_pmc_write(AT91_CKGR_PLLAR, CONFIG_SYS_PLLAR_VAL); + at91_pmc_write(AT91_CKGR_PLLAR, cfg.pmc_pllar); do { r = at91_pmc_read(AT91_PMC_SR); @@ -107,14 +110,14 @@ void __naked __bare_init reset(void) /* * PCK/x = MCK Master Clock from SLOW */ - at91_pmc_write(AT91_PMC_MCKR, CONFIG_SYS_MCKR1_VAL); + at91_pmc_write(AT91_PMC_MCKR, cfg.pmc_mckr1); pmc_check_mckrdy(); /* * PCK/x = MCK Master Clock from PLLA */ - at91_pmc_write(AT91_PMC_MCKR, CONFIG_SYS_MCKR2_VAL); + at91_pmc_write(AT91_PMC_MCKR, cfg.pmc_mckr2); pmc_check_mckrdy(); @@ -133,13 +136,13 @@ void __naked __bare_init reset(void) at91_sys_write(AT91_SDRAMC_MR, AT91_SDRAMC_MODE_NORMAL); /* SDRAMC_TR - Refresh Timer register */ - at91_sys_write(AT91_SDRAMC_TR, CONFIG_SYS_SDRC_TR_VAL1); + at91_sys_write(AT91_SDRAMC_TR, cfg.sdrc_tr1); /* SDRAMC_CR - Configuration register*/ - at91_sys_write(AT91_SDRAMC_CR, CONFIG_SYS_SDRC_CR_VAL); + at91_sys_write(AT91_SDRAMC_CR, cfg.sdrc_cr); /* Memory Device Type */ - at91_sys_write(AT91_SDRAMC_MDR, CONFIG_SYS_SDRC_MDR_VAL); + at91_sys_write(AT91_SDRAMC_MDR, cfg.sdrc_mdr); /* SDRAMC_MR : Precharge All */ at91_sys_write(AT91_SDRAMC_MR, AT91_SDRAMC_MODE_PRECHARGE); @@ -167,13 +170,13 @@ void __naked __bare_init reset(void) access_sdram(); /* SDRAMC_TR : Refresh Timer Counter */ - at91_sys_write(AT91_SDRAMC_TR, CONFIG_SYS_SDRC_TR_VAL2); + at91_sys_write(AT91_SDRAMC_TR, cfg.sdrc_tr2); /* access SDRAM */ access_sdram(); /* User reset enable*/ - at91_sys_write(AT91_RSTC_MR, CONFIG_SYS_RSTC_RMR_VAL); + at91_sys_write(AT91_RSTC_MR, cfg.rstc_rmr); #ifdef CONFIG_SYS_MATRIX_MCFG_REMAP /* MATRIX_MCFG - REMAP all masters */ @@ -190,3 +193,18 @@ void __naked __bare_init reset(void) end: board_init_lowlevel_return(); } + +void __naked __bare_init reset(void) +{ + common_reset(); + +#ifdef CONFIG_ARCH_AT91SAM9263 + arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16); +#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10) + arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 16); +#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) + arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16); +#endif + + at91sam926x_lowlevel_init(); +} diff --git a/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h b/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h new file mode 100644 index 0000000..29d9628 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD + * + * Under GPLv2 + */ + +#ifndef __AT91_LOWLEVEL_INIT_H__ +#define __AT91_LOWLEVEL_INIT_H__ + +struct at91sam926x_lowlevel_cfg { + u32 wdt_mr; + u32 ebi_pio_pdr; + u32 ebi_pio_ppudr; + u32 ebi_csa; + u32 smc_cs; + u32 smc_mode; + u32 smc_cycle; + u32 smc_pulse; + u32 smc_setup; + u32 pmc_mor; + u32 pmc_pllar; + u32 pmc_mckr1; + u32 pmc_mckr2; + u32 sdrc_cr; + u32 sdrc_tr1; + u32 sdrc_mdr; + u32 sdrc_tr2; + u32 rstc_rmr; +}; + +void at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg); + +#endif /* __AT91_LOWLEVEL_INIT_H__ */ -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox