mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [RFC PATCH 1/1] omap: xload: switch to generic bootstrap
Date: Mon, 21 Jan 2013 15:38:01 +0100	[thread overview]
Message-ID: <1358779081-31836-1-git-send-email-plagnioj@jcrosoft.com> (raw)

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
Hi,

	just compiled not tested

Best Regards,
J.
 .../configs/am335x_beaglebone_mlo_small_defconfig  |    2 +
 arch/arm/configs/archosg9_xload_defconfig          |    2 +
 arch/arm/configs/omap3530_beagle_xload_defconfig   |    3 +
 arch/arm/configs/panda_xload_defconfig             |    2 +
 arch/arm/configs/pcm049_xload_defconfig            |    3 +
 arch/arm/configs/phycard_a_l1_xload_defconfig      |    3 +
 arch/arm/configs/phycard_a_xl2_xload_defconfig     |    3 +
 arch/arm/mach-omap/xload.c                         |  292 +++++---------------
 8 files changed, 88 insertions(+), 222 deletions(-)
 rewrite arch/arm/mach-omap/xload.c (70%)

diff --git a/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig b/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
index 886dad9..91c18a5 100644
--- a/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
+++ b/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
@@ -29,3 +29,5 @@ CONFIG_MCI_OMAP_HSMMC=y
 # CONFIG_FS_DEVFS is not set
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_LFN=y
+CONFIG_BOOTSTRAP=y
+CONFIG_BOOTSTRAP_DISK=y
diff --git a/arch/arm/configs/archosg9_xload_defconfig b/arch/arm/configs/archosg9_xload_defconfig
index 6c6782f..26de57e 100644
--- a/arch/arm/configs/archosg9_xload_defconfig
+++ b/arch/arm/configs/archosg9_xload_defconfig
@@ -22,3 +22,5 @@ CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT=y
 # CONFIG_FS_RAMFS is not set
 # CONFIG_FS_DEVFS is not set
 CONFIG_FS_OMAP4_USBBOOT=y
+CONFIG_BOOTSTRAP=y
+CONFIG_BOOTSTRAP_DISK=y
diff --git a/arch/arm/configs/omap3530_beagle_xload_defconfig b/arch/arm/configs/omap3530_beagle_xload_defconfig
index d951b1c..2164208 100644
--- a/arch/arm/configs/omap3530_beagle_xload_defconfig
+++ b/arch/arm/configs/omap3530_beagle_xload_defconfig
@@ -36,3 +36,6 @@ CONFIG_MCI_OMAP_HSMMC=y
 # CONFIG_FS_RAMFS is not set
 # CONFIG_FS_DEVFS is not set
 CONFIG_FS_FAT=y
+CONFIG_BOOTSTRAP=y
+CONFIG_BOOTSTRAP_DEVFS=y
+CONFIG_BOOTSTRAP_DISK=y
diff --git a/arch/arm/configs/panda_xload_defconfig b/arch/arm/configs/panda_xload_defconfig
index fec09ce..84cebbf 100644
--- a/arch/arm/configs/panda_xload_defconfig
+++ b/arch/arm/configs/panda_xload_defconfig
@@ -25,3 +25,5 @@ CONFIG_MCI_OMAP_HSMMC=y
 # CONFIG_FS_RAMFS is not set
 # CONFIG_FS_DEVFS is not set
 CONFIG_FS_FAT=y
+CONFIG_BOOTSTRAP=y
+CONFIG_BOOTSTRAP_DISK=y
diff --git a/arch/arm/configs/pcm049_xload_defconfig b/arch/arm/configs/pcm049_xload_defconfig
index b6d3a7a..44f9194 100644
--- a/arch/arm/configs/pcm049_xload_defconfig
+++ b/arch/arm/configs/pcm049_xload_defconfig
@@ -39,3 +39,6 @@ CONFIG_MCI_OMAP_HSMMC=y
 # CONFIG_FS_RAMFS is not set
 # CONFIG_FS_DEVFS is not set
 CONFIG_FS_FAT=y
+CONFIG_BOOTSTRAP=y
+CONFIG_BOOTSTRAP_DEVFS=y
+CONFIG_BOOTSTRAP_DISK=y
diff --git a/arch/arm/configs/phycard_a_l1_xload_defconfig b/arch/arm/configs/phycard_a_l1_xload_defconfig
index 30253cb..d1e3bed 100644
--- a/arch/arm/configs/phycard_a_l1_xload_defconfig
+++ b/arch/arm/configs/phycard_a_l1_xload_defconfig
@@ -41,3 +41,6 @@ CONFIG_MCI_OMAP_HSMMC=y
 # CONFIG_FS_RAMFS is not set
 # CONFIG_FS_DEVFS is not set
 CONFIG_FS_FAT=y
+CONFIG_BOOTSTRAP=y
+CONFIG_BOOTSTRAP_DEVFS=y
+CONFIG_BOOTSTRAP_DISK=y
diff --git a/arch/arm/configs/phycard_a_xl2_xload_defconfig b/arch/arm/configs/phycard_a_xl2_xload_defconfig
index 7975220..d6b5daa 100644
--- a/arch/arm/configs/phycard_a_xl2_xload_defconfig
+++ b/arch/arm/configs/phycard_a_xl2_xload_defconfig
@@ -39,3 +39,6 @@ CONFIG_MCI_OMAP_HSMMC=y
 # CONFIG_FS_RAMFS is not set
 # CONFIG_FS_DEVFS is not set
 CONFIG_FS_FAT=y
+CONFIG_BOOTSTRAP=y
+CONFIG_BOOTSTRAP_DEVFS=y
+CONFIG_BOOTSTRAP_DISK=y
diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
dissimilarity index 70%
index 41533a9..c02e37e 100644
--- a/arch/arm/mach-omap/xload.c
+++ b/arch/arm/mach-omap/xload.c
@@ -1,222 +1,70 @@
-#include <common.h>
-#include <partition.h>
-#include <nand.h>
-#include <init.h>
-#include <driver.h>
-#include <linux/mtd/mtd.h>
-#include <fs.h>
-#include <fcntl.h>
-#include <mach/xload.h>
-#include <sizes.h>
-#include <filetype.h>
-
-static void *read_image_head(const char *name)
-{
-	void *header = xmalloc(ARM_HEAD_SIZE);
-	struct cdev *cdev;
-	int ret;
-
-	cdev = cdev_open(name, O_RDONLY);
-	if (!cdev) {
-		printf("failed to open partition\n");
-		return NULL;
-	}
-
-	ret = cdev_read(cdev, header, ARM_HEAD_SIZE, 0, 0);
-	cdev_close(cdev);
-
-	if (ret != ARM_HEAD_SIZE) {
-		printf("failed to read from partition\n");
-		return NULL;
-	}
-
-	return header;
-}
-
-static unsigned int get_image_size(void *head)
-{
-	unsigned int ret = 0;
-	unsigned int *psize = head + ARM_HEAD_SIZE_OFFSET;
-
-	if (is_barebox_arm_head(head))
-		ret = *psize;
-	debug("Detected barebox image size %u\n", ret);
-
-	return ret;
-}
-
-static void *omap_xload_boot_nand(int offset)
-{
-	int ret;
-	int size;
-	void *to, *header;
-	struct cdev *cdev;
-
-	devfs_add_partition("nand0", offset, SZ_1M, DEVFS_PARTITION_FIXED, "x");
-	dev_add_bb_dev("x", "bbx");
-
-	header = read_image_head("bbx");
-	if (header == NULL)
-		return NULL;
-
-	size = get_image_size(header);
-	if (!size) {
-		printf("failed to get image size\n");
-		return NULL;
-	}
-
-	to = xmalloc(size);
-
-	cdev = cdev_open("bbx", O_RDONLY);
-	if (!cdev) {
-		printf("failed to open nand\n");
-		return NULL;
-	}
-
-	ret = cdev_read(cdev, to, size, 0, 0);
-	if (ret != size) {
-		printf("failed to read from nand\n");
-		return NULL;
-	}
-
-	return to;
-}
-
-static void *omap_xload_boot_mmc(void)
-{
-	int ret;
-	void *buf;
-	int len;
-	const char *diskdev = "disk0.0";
-
-	ret = mount(diskdev, "fat", "/");
-	if (ret) {
-		printf("Unable to mount %s (%d)\n", diskdev, ret);
-		return NULL;
-	}
-
-	buf = read_file("/barebox.bin", &len);
-	if (!buf) {
-		printf("could not read barebox.bin from sd card\n");
-		return NULL;
-	}
-
-	return buf;
-}
-
-static void *omap_xload_boot_spi(int offset)
-{
-	int ret;
-	int size;
-	void *to, *header;
-	struct cdev *cdev;
-
-	devfs_add_partition("m25p0", offset, SZ_1M, DEVFS_PARTITION_FIXED, "x");
-
-	header = read_image_head("x");
-	if (header == NULL)
-		return NULL;
-
-	size = get_image_size(header);
-	if (!size) {
-		printf("failed to get image size\n");
-		return NULL;
-	}
-
-	to = xmalloc(size);
-
-	cdev = cdev_open("x", O_RDONLY);
-	if (!cdev) {
-		printf("failed to open spi flash\n");
-		return NULL;
-	}
-
-	ret = cdev_read(cdev, to, size, 0, 0);
-	if (ret != size) {
-		printf("failed to read from spi flash\n");
-		return NULL;
-	}
-
-	return to;
-}
-
-static void *omap4_xload_boot_usb(void){
-	int ret;
-	void *buf;
-	int len;
-
-	ret = mount("omap4_usbboot", "omap4_usbbootfs", "/");
-	if (ret) {
-		printf("Unable to mount omap4_usbbootfs (%d)\n", ret);
-		return NULL;
-	}
-
-	buf = read_file("/barebox.bin", &len);
-	if (!buf)
-		printf("could not read barebox.bin from omap4_usbbootfs\n");
-
-	return buf;
-}
-
-enum omap_boot_src omap_bootsrc(void)
-{
-#if defined(CONFIG_ARCH_OMAP3)
-	return omap3_bootsrc();
-#elif defined(CONFIG_ARCH_OMAP4)
-	return omap4_bootsrc();
-#elif defined(CONFIG_ARCH_AM33XX)
-	return am33xx_bootsrc();
-#endif
-}
-
-/*
- * Replaces the default shell in xload configuration
- */
-static __noreturn int omap_xload(void)
-{
-	int (*func)(void) = NULL;
-
-	switch (omap_bootsrc())
-	{
-	case OMAP_BOOTSRC_MMC1:
-		printf("booting from MMC1\n");
-		func = omap_xload_boot_mmc();
-		break;
-	case OMAP_BOOTSRC_USB1:
-		if (IS_ENABLED(CONFIG_FS_OMAP4_USBBOOT)) {
-			printf("booting from USB1\n");
-			func = omap4_xload_boot_usb();
-			break;
-		} else {
-			printf("booting from usb1 not enabled\n");
-		}
-	case OMAP_BOOTSRC_UNKNOWN:
-		printf("unknown boot source. Fall back to nand\n");
-	case OMAP_BOOTSRC_NAND:
-		printf("booting from NAND\n");
-		func = omap_xload_boot_nand(SZ_128K);
-		break;
-	case OMAP_BOOTSRC_SPI1:
-		printf("booting from SPI1\n");
-		func = omap_xload_boot_spi(SZ_128K);
-		break;
-	}
-
-	if (!func) {
-		printf("booting failed\n");
-		while (1);
-	}
-
-	shutdown_barebox();
-	func();
-
-	while (1);
-}
-
-static int omap_set_xload(void)
-{
-	barebox_main = omap_xload;
-
-	return 0;
-}
-late_initcall(omap_set_xload);
+#include <common.h>
+#include <partition.h>
+#include <nand.h>
+#include <init.h>
+#include <driver.h>
+#include <linux/mtd/mtd.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <mach/xload.h>
+#include <sizes.h>
+#include <filetype.h>
+#include <bootstrap.h>
+
+enum omap_boot_src omap_bootsrc(void)
+{
+#if defined(CONFIG_ARCH_OMAP3)
+	return omap3_bootsrc();
+#elif defined(CONFIG_ARCH_OMAP4)
+	return omap4_bootsrc();
+#elif defined(CONFIG_ARCH_AM33XX)
+	return am33xx_bootsrc();
+#endif
+}
+
+/*
+ * Replaces the default shell in xload configuration
+ */
+static __noreturn int omap_xload(void)
+{
+	int (*func)(void) = NULL;
+
+	switch (omap_bootsrc())
+	{
+	case OMAP_BOOTSRC_MMC1:
+		printf("booting from MMC1\n");
+		func = bootstrap_read_disk("disk0.0", NULL);
+		break;
+	case OMAP_BOOTSRC_USB1:
+		if (IS_ENABLED(CONFIG_FS_OMAP4_USBBOOT)) {
+			printf("booting from USB1\n");
+			func = bootstrap_read_disk("omap4_usbboot", "omap4_usbbootfs");
+			break;
+		} else {
+			printf("booting from usb1 not enabled\n");
+		}
+	case OMAP_BOOTSRC_UNKNOWN:
+		printf("unknown boot source. Fall back to nand\n");
+	case OMAP_BOOTSRC_NAND:
+		printf("booting from NAND\n");
+		func = bootstrap_read_devfs("nand0", true, SZ_128K, SZ_256K, SZ_1M);
+		break;
+	case OMAP_BOOTSRC_SPI1:
+		printf("booting from SPI1\n");
+		func = bootstrap_read_devfs("m25p0", false, SZ_128K, SZ_256K, SZ_1M);
+		break;
+	}
+
+	bootstrap_boot(func, false);
+	bootstrap_err("... failed\n");
+
+	while (1);
+}
+
+static int omap_set_xload(void)
+{
+	barebox_main = omap_xload;
+
+	return 0;
+}
+late_initcall(omap_set_xload);
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2013-01-21 14:39 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-21 14:38 Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-01-22 14:36 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 22:13 ` Sascha Hauer
2013-01-31 13:16   ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-31 13:20   ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1358779081-31836-1-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox