mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 6/6] sama5d3xek: add lcd support
Date: Thu, 31 Jan 2013 00:20:17 +0100	[thread overview]
Message-ID: <1359588017-20045-6-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1359588017-20045-1-git-send-email-plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/sama5d3xek/init.c     |   45 +++++++++++++++++++++++++++++++++
 arch/arm/configs/sama5d3xek_defconfig |    4 +++
 2 files changed, 49 insertions(+)

diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c
index ae23a31..d58bf44 100644
--- a/arch/arm/boards/sama5d3xek/init.c
+++ b/arch/arm/boards/sama5d3xek/init.c
@@ -153,6 +153,50 @@ static void ek_add_device_eth(void)
 static void ek_add_device_eth(void) {}
 #endif
 
+#if defined(CONFIG_DRIVER_VIDEO_ATMEL_HLCD)
+/*
+ * LCD Controller
+ */
+static struct fb_videomode at91_tft_vga_modes[] = {
+	{
+		.name		= "LG",
+		.refresh	= 60,
+		.xres		= 800,		.yres		= 480,
+		.pixclock	= KHZ2PICOS(33260),
+
+		.left_margin	= 88,		.right_margin	= 168,
+		.upper_margin	= 8,		.lower_margin	= 37,
+		.hsync_len	= 128,		.vsync_len	= 2,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+/* Default output mode is TFT 24 bit */
+#define BPP_OUT_DEFAULT_LCDCFG5	(LCDC_LCDCFG5_MODE_OUTPUT_24BPP)
+
+/* Driver datas */
+static struct atmel_lcdfb_platform_data ek_lcdc_data = {
+	.lcdcon_is_backlight		= true,
+	.default_bpp			= 16,
+	.default_dmacon			= ATMEL_LCDC_DMAEN,
+	.default_lcdcon2		= BPP_OUT_DEFAULT_LCDCFG5,
+	.guard_time			= 9,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+	.mode_list			= at91_tft_vga_modes,
+	.num_modes			= ARRAY_SIZE(at91_tft_vga_modes),
+};
+
+static void ek_add_device_lcdc(void)
+{
+	at91_add_device_lcdc(&ek_lcdc_data);
+}
+
+#else
+static void ek_add_device_lcdc(void) {}
+#endif
+
 #if defined(CONFIG_MCI_ATMEL)
 /*
  * MCI (SD/MMC)
@@ -333,6 +377,7 @@ static int at91sama5d3xek_devices_init(void)
 	ek_add_device_eth();
 	ek_add_device_spi();
 	ek_add_device_mci();
+	ek_add_device_lcdc();
 
 	armlinux_set_bootparams((void *)(SAMA5_DDRCS + 0x100));
 
diff --git a/arch/arm/configs/sama5d3xek_defconfig b/arch/arm/configs/sama5d3xek_defconfig
index c94419a..970ded5 100644
--- a/arch/arm/configs/sama5d3xek_defconfig
+++ b/arch/arm/configs/sama5d3xek_defconfig
@@ -43,6 +43,7 @@ CONFIG_CMD_GO=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_MTEST=y
 CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_SPLASH=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_GPIO=y
@@ -71,6 +72,8 @@ CONFIG_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_NAND_ATMEL_PMECC=y
 CONFIG_UBI=y
+CONFIG_VIDEO=y
+CONFIG_DRIVER_VIDEO_ATMEL_HLCD=y
 CONFIG_MCI=y
 CONFIG_MCI_STARTUP=y
 CONFIG_MCI_ATMEL=y
@@ -89,3 +92,4 @@ CONFIG_FS_TFTP=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
 CONFIG_FS_FAT_LFN=y
+CONFIG_PNG=y
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2013-01-30 23:21 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-30 23:08 [PATCH 0/6] atmel: add Atmel HLCDC support and boards Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 23:20 ` [PATCH 1/6] atmel_lcdfb: factorise common code between lcdc and new hlcdc IP Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 23:20   ` [PATCH 2/6] video: add Atmel HLCD support Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 23:20   ` [PATCH 3/6] at91sam9x5: add lcd support Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 23:20   ` [PATCH 4/6] at91sam9x5ek: " Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 23:20   ` [PATCH 5/6] sama5d3: " Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 23:20   ` Jean-Christophe PLAGNIOL-VILLARD [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359588017-20045-6-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox