mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 26/34] ARM: Setup stack at end of SDRAM
Date: Fri,  1 Feb 2013 08:59:39 +0100	[thread overview]
Message-ID: <1359705587-9762-27-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1359705587-9762-1-git-send-email-s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/cpu/cpu.c                 |   12 ++++++++++++
 arch/arm/cpu/start-pbl.c           |    4 +---
 arch/arm/cpu/start.c               |   18 +++++++++++++++++-
 arch/arm/include/asm/barebox-arm.h |    2 ++
 common/meminfo.c                   |    5 -----
 5 files changed, 32 insertions(+), 9 deletions(-)

diff --git a/arch/arm/cpu/cpu.c b/arch/arm/cpu/cpu.c
index 2ca871f..7761f5c 100644
--- a/arch/arm/cpu/cpu.c
+++ b/arch/arm/cpu/cpu.c
@@ -28,6 +28,7 @@
 #include <asm/mmu.h>
 #include <asm/system.h>
 #include <asm/memory.h>
+#include <asm-generic/memory_layout.h>
 #include <asm/system_info.h>
 #include <asm/cputype.h>
 #include <asm/cache.h>
@@ -91,6 +92,17 @@ void arch_shutdown(void)
 	__asm__ __volatile__("msr cpsr, %0" : : "r"(r));
 }
 
+extern unsigned long arm_stack_top;
+
+static int arm_request_stack(void)
+{
+	if (!request_sdram_region("stack", arm_stack_top - STACK_SIZE, STACK_SIZE))
+		pr_err("Error: Cannot request SDRAM region for stack\n");
+
+	return 0;
+}
+coredevice_initcall(arm_request_stack);
+
 #ifdef CONFIG_THUMB2_BAREBOX
 static void thumb2_execute(void *func, int argc, char *argv[])
 {
diff --git a/arch/arm/cpu/start-pbl.c b/arch/arm/cpu/start-pbl.c
index 64cd6ff..89839f0 100644
--- a/arch/arm/cpu/start-pbl.c
+++ b/arch/arm/cpu/start-pbl.c
@@ -174,8 +174,6 @@ static noinline __noreturn void __barebox_arm_entry(uint32_t membase,
  * be preserved and can be accessed later with barebox_arm_boarddata().
  *
  * -> membase + memsize
- *   ARM_RESERVE_MEM_SIZE    - reserved for board usage. Will not be touched
- *                             by barebox
  *   STACK_SIZE              - stack
  *   16KiB, aligned to 16KiB - First level page table if early MMU support
  *                             is enabled
@@ -188,7 +186,7 @@ static noinline __noreturn void __barebox_arm_entry(uint32_t membase,
 void __naked __noreturn barebox_arm_entry(uint32_t membase, uint32_t memsize,
 		uint32_t boarddata)
 {
-	arm_setup_stack(STACK_BASE + STACK_SIZE - 16);
+	arm_setup_stack(membase + memsize - 16);
 
 	__barebox_arm_entry(membase, memsize, boarddata);
 }
diff --git a/arch/arm/cpu/start.c b/arch/arm/cpu/start.c
index 9fd1e8d..a621161 100644
--- a/arch/arm/cpu/start.c
+++ b/arch/arm/cpu/start.c
@@ -26,11 +26,18 @@
 #include <asm/cache.h>
 #include <memory.h>
 
+unsigned long arm_stack_top;
+
 static noinline __noreturn void __start(uint32_t membase, uint32_t memsize,
 		uint32_t boarddata)
 {
+	unsigned long endmem = membase + memsize;
+
 	setup_c();
 
+	arm_stack_top = endmem;
+	endmem -= STACK_SIZE; /* Stack */
+
 	start_barebox();
 }
 
@@ -47,11 +54,20 @@ void __naked __section(.text_entry) start(void)
  * full SDRAM. The currently running binary can be inside or outside of this
  * region. TEXT_BASE can be inside or outside of this region. boarddata will
  * be preserved and can be accessed later with barebox_arm_boarddata().
+ *
+ * -> membase + memsize
+ *   STACK_SIZE              - stack
+ *   16KiB, aligned to 16KiB - First level page table if early MMU support
+ *                             is enabled
+ * -> maximum end of barebox binary
+ *
+ * Usually a TEXT_BASE of 1MiB below your lowest possible end of memory should
+ * be fine.
  */
 void __naked __noreturn barebox_arm_entry(uint32_t membase, uint32_t memsize,
                 uint32_t boarddata)
 {
-	arm_setup_stack(STACK_BASE + STACK_SIZE - 16);
+	arm_setup_stack(membase + memsize - 16);
 
 	__start(membase, memsize, boarddata);
 }
diff --git a/arch/arm/include/asm/barebox-arm.h b/arch/arm/include/asm/barebox-arm.h
index 42b7a3f..9c10e36 100644
--- a/arch/arm/include/asm/barebox-arm.h
+++ b/arch/arm/include/asm/barebox-arm.h
@@ -25,6 +25,8 @@
 #ifndef _BAREBOX_ARM_H_
 #define _BAREBOX_ARM_H_
 
+#include <sizes.h>
+
 /* cpu/.../cpu.c */
 int	cleanup_before_linux(void);
 
diff --git a/common/meminfo.c b/common/meminfo.c
index a09b2d2..5e3ff71 100644
--- a/common/meminfo.c
+++ b/common/meminfo.c
@@ -14,11 +14,6 @@ static int display_meminfo(void)
 	debug("bss segment:  0x%p -> 0x%p\n", __bss_start, __bss_stop - 1);
 	printf("malloc space: 0x%08lx -> 0x%08lx (size %s)\n",
 		mstart, mend, size_human_readable(msize));
-#ifdef CONFIG_ARM
-	printf("stack space:  0x%08x -> 0x%08x (size %s)\n",
-		STACK_BASE, STACK_BASE + STACK_SIZE - 1,
-		size_human_readable(STACK_SIZE));
-#endif
 	return 0;
 }
 late_initcall(display_meminfo);
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2013-02-01  8:00 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-01  7:59 [PATCH v2] Add new ARM entry point for barebox Sascha Hauer
2013-02-01  7:59 ` [PATCH 01/34] ARM: Add new " Sascha Hauer
2013-02-01  7:59 ` [PATCH 02/34] ARM: add __noreturn to board_init_lowlevel_return Sascha Hauer
2013-02-01  7:59 ` [PATCH 03/34] ARM i.MX: Use SRAM stack in lowlevel code Sascha Hauer
2013-02-01  7:59 ` [PATCH 04/34] ARM i.MX: Add i.MX specific entry point for barebox Sascha Hauer
2013-02-01  7:59 ` [PATCH 05/34] ARM i.MX: prepare external nand boot for SoC specific entry Sascha Hauer
2013-02-01  7:59 ` [PATCH 06/34] ARM i.MX boards: switch to barebox_arm_entry Sascha Hauer
2013-02-01  7:59 ` [PATCH 07/34] ARM MXS " Sascha Hauer
2013-02-01  7:59 ` [PATCH 08/34] ARM OMAP " Sascha Hauer
2013-02-01  7:59 ` [PATCH 09/34] ARM Samsung " Sascha Hauer
2013-02-01  7:59 ` [PATCH 10/34] ARM PXA " Sascha Hauer
2013-02-01  7:59 ` [PATCH 11/34] ARM ep93xx " Sascha Hauer
2013-02-01  7:59 ` [PATCH 12/34] ARM tegra " Sascha Hauer
2013-02-01  7:59 ` [PATCH 13/34] ARM nomadik " Sascha Hauer
2013-02-01  7:59 ` [PATCH 14/34] ARM versatile " Sascha Hauer
2013-02-01  7:59 ` [PATCH 15/34] ARM netx " Sascha Hauer
2013-02-01  7:59 ` [PATCH 16/34] ARM clep7212: " Sascha Hauer
2013-02-01  7:59 ` [PATCH 17/34] ARM raspberrypi: " Sascha Hauer
2013-02-01  7:59 ` [PATCH 18/34] ARM AT91: switch to barebox_arm_entry part1 Sascha Hauer
2013-02-01  8:11   ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 10:13     ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-01  7:59 ` [PATCH 19/34] ARM AT91: switch at91rm9200 board to barebox_arm_entry Sascha Hauer
2013-02-01  7:59 ` [PATCH 20/34] ARM AT91: switch sama5d3 " Sascha Hauer
2013-02-01  7:59 ` [PATCH 21/34] ARM AT91: switch remaining boards " Sascha Hauer
2013-02-01  8:12   ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-02 21:23   ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-01  7:59 ` [PATCH 22/34] ARM: remove now unused MACH_[HAS|DO]_LOWLEVEL_INIT Sascha Hauer
2013-02-01  7:59 ` [PATCH 23/34] ARM start-pbl: make board_init_lowlevel_return static Sascha Hauer
2013-02-01  7:59 ` [PATCH 24/34] ARM start-pbl: call uncompressed binary with arguments Sascha Hauer
2013-02-01  7:59 ` [PATCH 25/34] ARM start: pickup parameters from pbl Sascha Hauer
2013-02-01  7:59 ` Sascha Hauer [this message]
2013-02-01  7:59 ` [PATCH 27/34] ARM pbl: Use dynamic parameters for early malloc space Sascha Hauer
2013-02-01  7:59 ` [PATCH 28/34] ARM mmu: pickup already enabled mmu Sascha Hauer
2013-02-01  7:59 ` [PATCH 29/34] ARM: Factor out early mmu code Sascha Hauer
2013-02-01  7:59 ` [PATCH 30/34] ARM: Enable mmu early Sascha Hauer
2013-02-01  7:59 ` [PATCH 31/34] ARM: Automatically determine malloc size Sascha Hauer
2013-02-01  7:59 ` [PATCH 32/34] generic memory layout: fix deps for [MALLOC|STACK]_BASE Sascha Hauer
2013-02-01  7:59 ` [PATCH 33/34] ARM: disable HAVE_CONFIGURABLE_MEMORY_LAYOUT Sascha Hauer
2013-02-01  7:59 ` [PATCH 34/34] ARM pbl: inline decompress function Sascha Hauer
2013-02-01  8:15 ` [PATCH v2] Add new ARM entry point for barebox Jean-Christophe PLAGNIOL-VILLARD
  -- strict thread matches above, loose matches on Subject: below --
2013-01-27 10:46 [PATCH] " Sascha Hauer
2013-01-27 10:46 ` [PATCH 26/34] ARM: Setup stack at end of SDRAM Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359705587-9762-27-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox