From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 05/36] ARM i.MX: prepare external nand boot for SoC specific entry
Date: Sun, 3 Feb 2013 16:10:05 +0100 [thread overview]
Message-ID: <1359904236-11622-5-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1359904236-11622-1-git-send-email-plagnioj@jcrosoft.com>
From: Sascha Hauer <s.hauer@pengutronix.de>
i.MX will get SoC specific entry points for barebox. To find the
correct one we have to call these from the SoC specific
imx*_barebox_boot_nand_external functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/external-nand-boot.c | 73 +++++++++++++++++++++--------
arch/arm/mach-imx/include/mach/imx-nand.h | 1 -
2 files changed, 53 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-imx/external-nand-boot.c b/arch/arm/mach-imx/external-nand-boot.c
index 39ffb94..c97fec9 100644
--- a/arch/arm/mach-imx/external-nand-boot.c
+++ b/arch/arm/mach-imx/external-nand-boot.c
@@ -259,14 +259,19 @@ void __bare_init imx_nand_load_image(void *dest, int size)
}
/*
- * We are now running at the address we are linked at. Now load the image from
- * NAND to SDRAM and continue booting.
+ * This function assumes the currently running binary has been
+ * copied from its current position to an offset. It returns
+ * to the calling function - offset.
+ * NOTE: The calling function may not return itself since it still
+ * works on the old content of the lr register. Only call this
+ * from a __noreturn function.
*/
-static void __bare_init __naked insdram(void)
+static __bare_init __naked void jump_sdram(unsigned long offset)
{
- imx_nand_load_image((void *)_text, barebox_image_size);
-
- board_init_lowlevel_return();
+ __asm__ __volatile__ (
+ "sub lr, lr, %0;"
+ "mov pc, lr;" : : "r"(offset)
+ );
}
/*
@@ -274,7 +279,7 @@ static void __bare_init __naked insdram(void)
* running inside the NFC address space. If not, barebox is started from the
* currently running address without loading anything from NAND.
*/
-void __bare_init __noreturn imx_barebox_boot_nand_external(unsigned long nfc_base)
+void __bare_init imx_barebox_boot_nand_external(unsigned long nfc_base)
{
u32 r;
u32 *src, *trg;
@@ -283,7 +288,7 @@ void __bare_init __noreturn imx_barebox_boot_nand_external(unsigned long nfc_bas
/* skip NAND boot if not running from NFC space */
r = get_pc();
if (r < nfc_base || r > nfc_base + 0x800)
- board_init_lowlevel_return();
+ return;
src = (unsigned int *)nfc_base;
trg = (unsigned int *)_text;
@@ -291,13 +296,6 @@ void __bare_init __noreturn imx_barebox_boot_nand_external(unsigned long nfc_bas
/* Move ourselves out of NFC SRAM */
for (i = 0; i < 0x800 / sizeof(int); i++)
*trg++ = *src++;
-
- /* Jump to SDRAM */
- r = (unsigned int)&insdram;
- __asm__ __volatile__("mov pc, %0" : : "r"(r));
-
- /* not reached */
- while (1);
}
/*
@@ -306,30 +304,65 @@ void __bare_init __noreturn imx_barebox_boot_nand_external(unsigned long nfc_bas
* NAND. In this case the booting is continued without loading an image from
* NAND. This function needs a stack to be set up.
*/
+#ifdef CONFIG_ARCH_IMX21
void __bare_init __noreturn imx21_barebox_boot_nand_external(void)
{
- imx_barebox_boot_nand_external(MX21_NFC_BASE_ADDR);
+ unsigned long nfc_base = MX21_NFC_BASE_ADDR;
+
+ imx_barebox_boot_nand_external(nfc_base);
+ jump_sdram(nfc_base - (unsigned long)_text);
+ imx_nand_load_image((void *)_text, barebox_image_size);
+ board_init_lowlevel_return();
}
+#endif
+#ifdef CONFIG_ARCH_IMX25
void __bare_init __noreturn imx25_barebox_boot_nand_external(void)
{
- imx_barebox_boot_nand_external(MX25_NFC_BASE_ADDR);
+ unsigned long nfc_base = MX25_NFC_BASE_ADDR;
+
+ imx_barebox_boot_nand_external(nfc_base);
+ jump_sdram(nfc_base - (unsigned long)_text);
+ imx_nand_load_image((void *)_text, barebox_image_size);
+ board_init_lowlevel_return();
}
+#endif
+#ifdef CONFIG_ARCH_IMX27
void __bare_init __noreturn imx27_barebox_boot_nand_external(void)
{
- imx_barebox_boot_nand_external(MX27_NFC_BASE_ADDR);
+ unsigned long nfc_base = MX27_NFC_BASE_ADDR;
+
+ imx_barebox_boot_nand_external(nfc_base);
+ jump_sdram(nfc_base - (unsigned long)_text);
+ imx_nand_load_image((void *)_text, barebox_image_size);
+ board_init_lowlevel_return();
}
+#endif
+#ifdef CONFIG_ARCH_IMX31
void __bare_init __noreturn imx31_barebox_boot_nand_external(void)
{
- imx_barebox_boot_nand_external(MX31_NFC_BASE_ADDR);
+ unsigned long nfc_base = MX31_NFC_BASE_ADDR;
+
+ imx_barebox_boot_nand_external(nfc_base);
+ jump_sdram(nfc_base - (unsigned long)_text);
+ imx_nand_load_image((void *)_text, barebox_image_size);
+ board_init_lowlevel_return();
}
+#endif
+#ifdef CONFIG_ARCH_IMX35
void __bare_init __noreturn imx35_barebox_boot_nand_external(void)
{
- imx_barebox_boot_nand_external(MX35_NFC_BASE_ADDR);
+ unsigned long nfc_base = MX35_NFC_BASE_ADDR;
+
+ imx_barebox_boot_nand_external(nfc_base);
+ jump_sdram(nfc_base - (unsigned long)_text);
+ imx_nand_load_image((void *)_text, barebox_image_size);
+ board_init_lowlevel_return();
}
+#endif
#define CONFIG_NAND_IMX_BOOT_DEBUG
#ifdef CONFIG_NAND_IMX_BOOT_DEBUG
diff --git a/arch/arm/mach-imx/include/mach/imx-nand.h b/arch/arm/mach-imx/include/mach/imx-nand.h
index a1f209e..8352d79 100644
--- a/arch/arm/mach-imx/include/mach/imx-nand.h
+++ b/arch/arm/mach-imx/include/mach/imx-nand.h
@@ -3,7 +3,6 @@
#include <linux/mtd/mtd.h>
-void imx_nand_load_image(void *dest, int size);
void imx21_barebox_boot_nand_external(void);
void imx25_barebox_boot_nand_external(void);
void imx27_barebox_boot_nand_external(void);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-02-03 15:11 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-03 15:03 [PATCH v3] Add new ARM entry point for barebox Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 01/36] ARM: Add new " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 02/36] ARM: add __noreturn to board_init_lowlevel_return Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 03/36] ARM i.MX: Use SRAM stack in lowlevel code Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 04/36] ARM i.MX: Add i.MX specific entry point for barebox Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-02-03 15:10 ` [PATCH 06/36] ARM i.MX boards: switch to barebox_arm_entry Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 07/36] ARM MXS " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 08/36] ARM OMAP " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 09/36] ARM Samsung " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 10/36] ARM PXA " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 11/36] ARM ep93xx " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 12/36] ARM tegra " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 13/36] ARM nomadik " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 14/36] ARM versatile " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 15/36] ARM netx " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 16/36] ARM clep7212: " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 17/36] ARM raspberrypi: " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 18/36] ARM AT91: switch at91sam9 to barebox_arm_entry part1 Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 19/36] ARM AT91: switch at91rm9200 board to barebox_arm_entry Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 20/36] ARM AT91: switch at91sam9g45 " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 21/36] ARM AT91: switch at91sam9x5 " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 22/36] ARM AT91: switch at91sam9n12 " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 23/36] ARM AT91: switch sama5d3 " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 24/36] ARM: remove now unused MACH_[HAS|DO]_LOWLEVEL_INIT Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 25/36] ARM start-pbl: make board_init_lowlevel_return static Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 26/36] ARM start-pbl: call uncompressed binary with arguments Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 27/36] ARM start: pickup parameters from pbl Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 28/36] ARM: Setup stack at end of SDRAM Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 29/36] ARM pbl: Use dynamic parameters for early malloc space Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 30/36] ARM mmu: pickup already enabled mmu Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 31/36] ARM: Factor out early mmu code Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 32/36] ARM: Enable mmu early Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 33/36] ARM: Automatically determine malloc size Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 34/36] generic memory layout: fix deps for [MALLOC|STACK]_BASE Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 35/36] ARM: disable HAVE_CONFIGURABLE_MEMORY_LAYOUT Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 36/36] ARM pbl: inline decompress function Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359904236-11622-5-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox