From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1U2OsP-0006WN-57 for barebox@lists.infradead.org; Mon, 04 Feb 2013 16:26:39 +0000 Received: from dude.hi.pengutronix.de ([2001:6f8:1178:2:21e:67ff:fe11:9c5c]) by metis.ext.pengutronix.de with esmtp (Exim 4.72) (envelope-from ) id 1U2OsL-0001Nk-DL for barebox@lists.infradead.org; Mon, 04 Feb 2013 17:26:33 +0100 Received: from mgr by dude.hi.pengutronix.de with local (Exim 4.80) (envelope-from ) id 1U2OsL-000897-BN for barebox@lists.infradead.org; Mon, 04 Feb 2013 17:26:33 +0100 From: Michael Grzeschik Date: Mon, 4 Feb 2013 17:26:18 +0100 Message-Id: <1359995179-2519-3-git-send-email-m.grzeschik@pengutronix.de> In-Reply-To: <1359995179-2519-1-git-send-email-m.grzeschik@pengutronix.de> References: <1359995179-2519-1-git-send-email-m.grzeschik@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 2/3] mxs_spi: initial commit To: barebox@lists.infradead.org Signed-off-by: Michael Grzeschik --- arch/arm/mach-mxs/include/mach/ssp.h | 2 + drivers/spi/Kconfig | 5 + drivers/spi/Makefile | 1 + drivers/spi/mxs_spi.c | 306 ++++++++++++++++++++++++++++++++++ 4 files changed, 314 insertions(+) create mode 100644 drivers/spi/mxs_spi.c diff --git a/arch/arm/mach-mxs/include/mach/ssp.h b/arch/arm/mach-mxs/include/mach/ssp.h index f91770f..067cf12 100644 --- a/arch/arm/mach-mxs/include/mach/ssp.h +++ b/arch/arm/mach-mxs/include/mach/ssp.h @@ -23,6 +23,7 @@ #define SSP_CTRL0_BUS_WIDTH(x) (((x) & 0x3) << 22) #define SSP_CTRL0_WAIT_FOR_IRQ (1 << 21) #define SSP_CTRL0_WAIT_FOR_CMD (1 << 20) +#define SSP_CTRL0_SSP_ASSERT_OUT(x) (((x) & 0x3) << 20) #define SSP_CTRL0_LONG_RESP (1 << 19) #define SSP_CTRL0_GET_RESP (1 << 17) #define SSP_CTRL0_ENABLE (1 << 16) @@ -51,6 +52,7 @@ /* bit definition for register HW_SSP_CTRL1 */ #define SSP_CTRL1_POLARITY (1 << 9) #define SSP_CTRL1_PHASE (1 << 10) +#define SSP_CTRL1_DMA_ENABLE (1 << 13) #define SSP_CTRL1_WORD_LENGTH(x) (((x) & 0xf) << 4) #define SSP_CTRL1_SSP_MODE(x) ((x) & 0xf) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 10b8fea..218c2ff 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -33,6 +33,11 @@ config DRIVER_SPI_IMX_2_3 depends on ARCH_IMX51 || ARCH_IMX53 || ARCH_IMX6 default y +config DRIVER_SPI_MXS + bool "i.MX (23,28) SPI Master driver" + depends on ARCH_MXS + depends on SPI + config DRIVER_SPI_OMAP3 bool "OMAP3 McSPI Master driver" depends on ARCH_OMAP3 diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index b53061e..642b7ec 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_SPI) += spi.o obj-$(CONFIG_DRIVER_SPI_IMX) += imx_spi.o +obj-$(CONFIG_DRIVER_SPI_MXS) += mxs_spi.o obj-$(CONFIG_DRIVER_SPI_ALTERA) += altera_spi.o obj-$(CONFIG_DRIVER_SPI_ATMEL) += atmel_spi.o obj-$(CONFIG_DRIVER_SPI_OMAP3) += omap3_spi.o diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c new file mode 100644 index 0000000..6fb7f9c --- /dev/null +++ b/drivers/spi/mxs_spi.c @@ -0,0 +1,306 @@ +/* + * Freescale i.MX28 SPI driver + * + * Copyright (C) 2013 Michael Grzeschik + * + * Copyright (C) 2011 Marek Vasut + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MXS_SPI_MAX_TIMEOUT (10 * MSECOND) + +#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */ +#define SPI_XFER_END 0x02 /* Deassert CS after transfer */ + +struct mxs_spi { + struct spi_master master; + uint32_t max_khz; + uint32_t mode; + struct clk *clk; + void __iomem *regs; +}; + +static inline struct mxs_spi *to_mxs(struct spi_master *master) +{ + return container_of(master, struct mxs_spi, master); +} + +/* + * Set SSP/MMC bus frequency, in kHz + */ +static void imx_set_ssp_busclock(struct spi_master *master, uint32_t freq) +{ + struct mxs_spi *mxs = to_mxs(master); + const uint32_t sspclk = imx_get_sspclk(master->bus_num); + uint32_t val; + uint32_t divide, rate, tgtclk; + + /* + * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)), + * CLOCK_DIVIDE has to be an even value from 2 to 254, and + * CLOCK_RATE could be any integer from 0 to 255. + */ + for (divide = 2; divide < 254; divide += 2) { + rate = sspclk / freq / divide; + if (rate <= 256) + break; + } + + tgtclk = sspclk / divide / rate; + while (tgtclk > freq) { + rate++; + tgtclk = sspclk / divide / rate; + } + if (rate > 256) + rate = 256; + + /* Always set timeout the maximum */ + val = SSP_TIMING_TIMEOUT_MASK | + SSP_TIMING_CLOCK_DIVIDE(divide) | + SSP_TIMING_CLOCK_RATE(rate - 1); + writel(val, mxs->regs + HW_SSP_TIMING); + + debug("SPI%d: Set freq rate to %d KHz (requested %d KHz)\n", + bus, tgtclk, freq); +} + +static int mxs_spi_setup(struct spi_device *spi) +{ + struct spi_master *master = spi->master; + struct mxs_spi *mxs = to_mxs(master); + uint32_t val = 0; + + /* MXS SPI: 4 ports and 3 chip selects maximum */ + if (master->bus_num > 3 || spi->chip_select > 2) { + printf("mxs_spi: invalid bus %d / chip select %d\n", + master->bus_num, spi->chip_select); + return -EINVAL; + } + + mxs_reset_block(mxs->regs + HW_SSP_CTRL0, 0); + + val |= SSP_CTRL0_SSP_ASSERT_OUT(spi->chip_select); + val |= SSP_CTRL0_BUS_WIDTH(0); + writel(val, mxs->regs + HW_SSP_CTRL0 + BIT_SET); + + val = SSP_CTRL1_SSP_MODE(0) | SSP_CTRL1_WORD_LENGTH(7); + val |= (mxs->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0; + val |= (mxs->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0; + writel(val, mxs->regs + HW_SSP_CTRL1); + + writel(0x0, mxs->regs + HW_SSP_CMD0); + writel(0x0, mxs->regs + HW_SSP_CMD1); + + imx_set_ssp_busclock(master, spi->max_speed_hz); + + return 0; +} + +static void mxs_spi_start_xfer(struct mxs_spi *mxs) +{ + writel(SSP_CTRL0_LOCK_CS, mxs->regs + HW_SSP_CTRL0 + BIT_SET); + writel(SSP_CTRL0_IGNORE_CRC, mxs->regs + HW_SSP_CTRL0 + BIT_CLR); +} + +static void mxs_spi_end_xfer(struct mxs_spi *mxs) +{ + writel(SSP_CTRL0_LOCK_CS, mxs->regs + HW_SSP_CTRL0 + BIT_CLR); + writel(SSP_CTRL0_IGNORE_CRC, mxs->regs + HW_SSP_CTRL0 + BIT_SET); +} + +static uint32_t mxs_spi_cs_to_reg(unsigned cs) +{ + uint32_t select = 0; + + if (cs & 1) + select |= SSP_CTRL0_WAIT_FOR_CMD; + if (cs & 2) + select |= SSP_CTRL0_WAIT_FOR_IRQ; + + return select; +} + +static void mxs_spi_set_cs(struct spi_device *spi) +{ + const uint32_t mask = SSP_CTRL0_WAIT_FOR_CMD | SSP_CTRL0_WAIT_FOR_IRQ; + uint32_t select; + struct mxs_spi *mxs = to_mxs(spi->master); + + writel(mask, mxs->regs + HW_SSP_CTRL0 + BIT_CLR); + select = mxs_spi_cs_to_reg(spi->chip_select); + writel(select, mxs->regs + HW_SSP_CTRL0 + BIT_SET); +} + +static int mxs_spi_xfer_pio(struct spi_device *spi, + char *data, int length, int write, unsigned long flags) +{ + struct mxs_spi *mxs = to_mxs(spi->master); + + if (flags & SPI_XFER_BEGIN) + mxs_spi_start_xfer(mxs); + + mxs_spi_set_cs(spi); + + while (length--) { + if ((flags & SPI_XFER_END) && !length) + mxs_spi_end_xfer(mxs); + + /* We transfer 1 byte */ + writel(1, mxs->regs + HW_SSP_XFER_COUNT); + + if (write) + writel(SSP_CTRL0_READ, mxs->regs + HW_SSP_CTRL0 + BIT_CLR); + else + writel(SSP_CTRL0_READ, mxs->regs + HW_SSP_CTRL0 + BIT_SET); + + writel(SSP_CTRL0_RUN, mxs->regs + HW_SSP_CTRL0 + BIT_SET); + + if (wait_on_timeout(MXS_SPI_MAX_TIMEOUT, + (readl(mxs->regs + HW_SSP_CTRL0) & SSP_CTRL0_RUN) == SSP_CTRL0_RUN)) { + printf("MXS SPI: Timeout waiting for start\n"); + return -ETIMEDOUT; + } + + if (write) + writel(*data++, mxs->regs + HW_SSP_DATA); + + writel(SSP_CTRL0_DATA_XFER, mxs->regs + HW_SSP_CTRL0 + BIT_SET); + + if (!write) { + if (wait_on_timeout(MXS_SPI_MAX_TIMEOUT, + !(readl(mxs->regs + HW_SSP_STATUS) & SSP_STATUS_FIFO_EMPTY))) { + printf("MXS SPI: Timeout waiting for data\n"); + return -ETIMEDOUT; + } + + *data++ = readl(mxs->regs + HW_SSP_DATA) & 0xff; + } + + if (wait_on_timeout(MXS_SPI_MAX_TIMEOUT, + !(readl(mxs->regs + HW_SSP_CTRL0) & SSP_CTRL0_RUN))) { + printf("MXS SPI: Timeout waiting for finish\n"); + return -ETIMEDOUT; + } + } + + return 0; +} + +static int mxs_spi_transfer(struct spi_device *spi, struct spi_message *mesg) +{ + struct mxs_spi *mxs = to_mxs(spi->master); + struct spi_transfer *t = NULL; + char dummy; + unsigned long flags = 0; + int write = 0; + char *data = NULL; + int ret; + mesg->actual_length = 0; + + list_for_each_entry(t, &mesg->transfers, transfer_list) { + + flags = 0; + + if (t->tx_buf) { + data = (char *) t->tx_buf; + write = 1; + } else if (t->rx_buf) { + data = (char *) t->rx_buf; + write = 0; + } + + if (&t->transfer_list == mesg->transfers.next) + flags |= SPI_XFER_BEGIN; + + if (&t->transfer_list == mesg->transfers.prev) + flags |= SPI_XFER_END; + + if ((t->rx_buf && t->tx_buf)) { + printf("Cannot send and receive simultaneously \n"); + break; + } + + if ((!t->rx_buf && !t->tx_buf)) { + printf("No Data\n"); + break; + } + + if (t->len == 0) { + if (flags == SPI_XFER_END) { + t->len = 1; + t->rx_buf = (void *) &dummy; + } else { + return 0; + } + } + + writel(SSP_CTRL1_DMA_ENABLE, mxs->regs + HW_SSP_CTRL1 + BIT_CLR); + ret = mxs_spi_xfer_pio(spi, data, t->len, write, flags); + mesg->actual_length += t->len; + } + + return 0; +} + +static int mxs_spi_probe(struct device_d *dev) +{ + struct spi_master *master; + struct mxs_spi *mxs; + + mxs = xzalloc(sizeof(*mxs)); + if (!mxs) + return -ENOMEM; + + master = &mxs->master; + master->dev = dev; + + master->bus_num = dev->id; + master->setup = mxs_spi_setup; + master->transfer = mxs_spi_transfer; + master->num_chipselect = 3; + mxs->mode = SPI_CPOL | SPI_CPHA; + + mxs->regs = dev_request_mem_region(dev, 0); + + spi_register_master(master); + + return 0; +} + +static struct driver_d mxs_spi_driver = { + .name = "mxs_spi", + .probe = mxs_spi_probe, +}; + +static int __init mxs_spi_init(void) +{ + platform_driver_register(&mxs_spi_driver); + return 0; +} + +device_initcall(mxs_spi_init); + +MODULE_AUTHOR("Denx Software Engeneering and Michael Grzeschik"); +MODULE_DESCRIPTION("MXS SPI driver"); +MODULE_LICENSE("GPL"); -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox