mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Vicente Bergas <vicencb@gmail.com>
To: barebox@lists.infradead.org
Cc: Vicente Bergas <vicencb@gmail.com>
Subject: [PATCH] DeviceTree: add support for initrd in the DT
Date: Sun, 10 Feb 2013 16:22:06 +0100	[thread overview]
Message-ID: <1360509726-885-1-git-send-email-vicencb@gmail.com> (raw)

Add the initrd start and end address to the DT, code comes from u-boot.
Use this addition on the ArchosG9 board as an example.

Signed-off-by: Vicente Bergas <vicencb@gmail.com>
---
 arch/arm/boards/archosg9/env/config       |  1 +
 arch/arm/configs/archosg9_defconfig       |  4 ++
 arch/arm/configs/archosg9_xload_defconfig |  1 +
 arch/arm/lib/armlinux.c                   |  1 +
 common/oftree.c                           | 66 +++++++++++++++++++++++++++++++
 include/of.h                              |  1 +
 6 files changed, 74 insertions(+)

diff --git a/arch/arm/boards/archosg9/env/config b/arch/arm/boards/archosg9/env/config
index 8f3edb0..60467f6 100644
--- a/arch/arm/boards/archosg9/env/config
+++ b/arch/arm/boards/archosg9/env/config
@@ -1,3 +1,4 @@
 global.bootm.image="${TARGET_ROOT}/boot/zImage"
 global.bootm.initrd="${TARGET_ROOT}/boot/initrd"
+global.bootm.oftree="${TARGET_ROOT}/boot/omap4-archosg9.dtb"
 global.linux.bootargs.base="console=ttyO0,115200n8 root=/dev/ram0"
diff --git a/arch/arm/configs/archosg9_defconfig b/arch/arm/configs/archosg9_defconfig
index 9a051da..337a7b7 100644
--- a/arch/arm/configs/archosg9_defconfig
+++ b/arch/arm/configs/archosg9_defconfig
@@ -45,6 +45,9 @@ CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
 CONFIG_CMD_BOOTM_AIMAGE=y
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OF_NODE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_MAGICVAR=y
@@ -68,3 +71,4 @@ CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
 CONFIG_FS_FAT_LFN=y
 CONFIG_FS_OMAP4_USBBOOT=y
+CONFIG_OFDEVICE=y
diff --git a/arch/arm/configs/archosg9_xload_defconfig b/arch/arm/configs/archosg9_xload_defconfig
index 83743fa..b25778a 100644
--- a/arch/arm/configs/archosg9_xload_defconfig
+++ b/arch/arm/configs/archosg9_xload_defconfig
@@ -21,4 +21,5 @@ CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT=y
 # CONFIG_SPI is not set
 # CONFIG_FS_RAMFS is not set
 # CONFIG_FS_DEVFS is not set
+CONFIG_FS_FAT=y
 CONFIG_FS_OMAP4_USBBOOT=y
diff --git a/arch/arm/lib/armlinux.c b/arch/arm/lib/armlinux.c
index 40a63ea..166984a 100644
--- a/arch/arm/lib/armlinux.c
+++ b/arch/arm/lib/armlinux.c
@@ -266,6 +266,8 @@ void start_linux(void *adr, int swap, unsigned long initrd_address,
 
 	if (oftree) {
 		printf("booting Linux kernel with devicetree\n");
+		fdt_initrd(oftree, initrd_address,
+			initrd_address+initrd_size, 1);
 		params = oftree;
 	} else {
 		setup_tags(initrd_address, initrd_size, swap);
diff --git a/common/oftree.c b/common/oftree.c
index 0df5209..3ec6a63 100644
--- a/common/oftree.c
+++ b/common/oftree.c
@@ -246,6 +246,72 @@ int fdt_get_path_or_create(struct fdt_header *fdt, const char *path)
 	return nodeoffset;
 }
 
+int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
+{
+	int   nodeoffset;
+	int   err, j, total;
+	u32   tmp;
+	const char *path;
+	uint64_t addr, size;
+
+	/* Find the "chosen" node.  */
+	nodeoffset = fdt_path_offset(fdt, "/chosen");
+
+	/* If there is no "chosen" node in the blob return */
+	if (nodeoffset < 0) {
+		printf("fdt_initrd: %s\n", fdt_strerror(nodeoffset));
+		return nodeoffset;
+	}
+
+	/* just return if initrd_start/end aren't valid */
+	if ((initrd_start == 0) || (initrd_end == 0))
+		return 0;
+
+	total = fdt_num_mem_rsv(fdt);
+
+	/*
+	 * Look for an existing entry and update it.  If we don't find
+	 * the entry, we will j be the next available slot.
+	 */
+	for (j = 0; j < total; j++) {
+		err = fdt_get_mem_rsv(fdt, j, &addr, &size);
+		if (addr == initrd_start) {
+			fdt_del_mem_rsv(fdt, j);
+			break;
+		}
+	}
+
+	err = fdt_add_mem_rsv(fdt, initrd_start, initrd_end - initrd_start);
+	if (err < 0) {
+		printf("fdt_initrd: %s\n", fdt_strerror(err));
+		return err;
+	}
+
+	path = fdt_getprop(fdt, nodeoffset, "linux,initrd-start", NULL);
+	if ((path == NULL) || force) {
+		tmp = __cpu_to_be32(initrd_start);
+		err = fdt_setprop(fdt, nodeoffset,
+			"linux,initrd-start", &tmp, sizeof(tmp));
+		if (err < 0) {
+			printf("WARNING: "
+				"could not set linux,initrd-start %s.\n",
+				fdt_strerror(err));
+			return err;
+		}
+		tmp = __cpu_to_be32(initrd_end);
+		err = fdt_setprop(fdt, nodeoffset,
+			"linux,initrd-end", &tmp, sizeof(tmp));
+		if (err < 0) {
+			printf("WARNING: could not set linux,initrd-end %s.\n",
+				fdt_strerror(err));
+
+			return err;
+		}
+	}
+
+	return 0;
+}
+
 static int of_fixup_bootargs(struct fdt_header *fdt)
 {
 	int nodeoffset;
diff --git a/include/of.h b/include/of.h
index d3a310f..dcb4c4b 100644
--- a/include/of.h
+++ b/include/of.h
@@ -18,6 +18,7 @@ void do_fixup_by_path(struct fdt_header *fdt, const char *path, const char *prop
 void do_fixup_by_path_u32(struct fdt_header *fdt, const char *path, const char *prop,
 			  u32 val, int create);
 int fdt_get_path_or_create(struct fdt_header *fdt, const char *path);
+int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force);
 
 #define OF_BAD_ADDR      ((u64)-1)
 
-- 
1.8.1.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2013-02-10 15:22 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-10 15:22 Vicente Bergas [this message]
2013-02-10 16:01 ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1360509726-885-1-git-send-email-vicencb@gmail.com \
    --to=vicencb@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox