From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/3] highbank: add xgmac support
Date: Mon, 11 Feb 2013 18:13:52 +0100 [thread overview]
Message-ID: <1360602834-12373-1-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20130211171031.GZ19322@game.jcrosoft.org>
Cc: Rob Herring <rob.herring@calxeda.com
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
drivers/net/Kconfig | 3 +
drivers/net/Makefile | 1 +
drivers/net/xgmac.c | 731 ++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 735 insertions(+)
create mode 100644 drivers/net/xgmac.c
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index cf6ceee..bcf245d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -27,6 +27,9 @@ menu "Network drivers"
source "drivers/net/phy/Kconfig"
+config DRIVER_NET_CALXEDA_XGMAC
+ bool "Calxeda xgmac"
+
config DRIVER_NET_CS8900
bool "cs8900 ethernet driver"
depends on HAS_CS8900
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6e1aeaa..42136f8 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_DRIVER_NET_CALXEDA_XGMAC) += xgmac.o
obj-$(CONFIG_DRIVER_NET_CS8900) += cs8900.o
obj-$(CONFIG_DRIVER_NET_CPSW) += cpsw.o
obj-$(CONFIG_DRIVER_NET_SMC911X) += smc911x.o
diff --git a/drivers/net/xgmac.c b/drivers/net/xgmac.c
new file mode 100644
index 0000000..04630b0
--- /dev/null
+++ b/drivers/net/xgmac.c
@@ -0,0 +1,731 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <net.h>
+#include <clock.h>
+#include <malloc.h>
+#include <xfuncs.h>
+#include <init.h>
+#include <errno.h>
+#include <io.h>
+#include <linux/err.h>
+#include <asm/mmu.h>
+
+#define TX_NUM_DESC 1
+#define RX_NUM_DESC 32
+
+#define ETH_BUF_SZ 2048
+#define TX_BUF_SZ (ETH_BUF_SZ * TX_NUM_DESC)
+#define RX_BUF_SZ (ETH_BUF_SZ * RX_NUM_DESC)
+
+/* XGMAC Register definitions */
+#define XGMAC_CONTROL 0x00000000 /* MAC Configuration */
+#define XGMAC_FRAME_FILTER 0x00000004 /* MAC Frame Filter */
+#define XGMAC_FLOW_CTRL 0x00000018 /* MAC Flow Control */
+#define XGMAC_VLAN_TAG 0x0000001C /* VLAN Tags */
+#define XGMAC_VERSION 0x00000020 /* Version */
+#define XGMAC_VLAN_INCL 0x00000024 /* VLAN tag for tx frames */
+#define XGMAC_LPI_CTRL 0x00000028 /* LPI Control and Status */
+#define XGMAC_LPI_TIMER 0x0000002C /* LPI Timers Control */
+#define XGMAC_TX_PACE 0x00000030 /* Transmit Pace and Stretch */
+#define XGMAC_VLAN_HASH 0x00000034 /* VLAN Hash Table */
+#define XGMAC_DEBUG 0x00000038 /* Debug */
+#define XGMAC_INT_STAT 0x0000003C /* Interrupt and Control */
+#define XGMAC_ADDR_HIGH(reg) (0x00000040 + ((reg) * 8))
+#define XGMAC_ADDR_LOW(reg) (0x00000044 + ((reg) * 8))
+#define XGMAC_HASH(n) (0x00000300 + (n) * 4) /* HASH table regs */
+#define XGMAC_NUM_HASH 16
+#define XGMAC_OMR 0x00000400
+#define XGMAC_REMOTE_WAKE 0x00000700 /* Remote Wake-Up Frm Filter */
+#define XGMAC_PMT 0x00000704 /* PMT Control and Status */
+#define XGMAC_MMC_CTRL 0x00000800 /* XGMAC MMC Control */
+#define XGMAC_MMC_INTR_RX 0x00000804 /* Recieve Interrupt */
+#define XGMAC_MMC_INTR_TX 0x00000808 /* Transmit Interrupt */
+#define XGMAC_MMC_INTR_MASK_RX 0x0000080c /* Recieve Interrupt Mask */
+#define XGMAC_MMC_INTR_MASK_TX 0x00000810 /* Transmit Interrupt Mask */
+
+
+/* Hardware TX Statistics Counters */
+#define XGMAC_MMC_TXOCTET_GB_LO 0x00000814
+#define XGMAC_MMC_TXOCTET_GB_HI 0x00000818
+#define XGMAC_MMC_TXFRAME_GB_LO 0x0000081C
+#define XGMAC_MMC_TXFRAME_GB_HI 0x00000820
+#define XGMAC_MMC_TXBCFRAME_G 0x00000824
+#define XGMAC_MMC_TXMCFRAME_G 0x0000082C
+#define XGMAC_MMC_TXUCFRAME_GB 0x00000864
+#define XGMAC_MMC_TXMCFRAME_GB 0x0000086C
+#define XGMAC_MMC_TXBCFRAME_GB 0x00000874
+#define XGMAC_MMC_TXUNDERFLOW 0x0000087C
+#define XGMAC_MMC_TXOCTET_G_LO 0x00000884
+#define XGMAC_MMC_TXOCTET_G_HI 0x00000888
+#define XGMAC_MMC_TXFRAME_G_LO 0x0000088C
+#define XGMAC_MMC_TXFRAME_G_HI 0x00000890
+#define XGMAC_MMC_TXPAUSEFRAME 0x00000894
+#define XGMAC_MMC_TXVLANFRAME 0x0000089C
+
+/* Hardware RX Statistics Counters */
+#define XGMAC_MMC_RXFRAME_GB_LO 0x00000900
+#define XGMAC_MMC_RXFRAME_GB_HI 0x00000904
+#define XGMAC_MMC_RXOCTET_GB_LO 0x00000908
+#define XGMAC_MMC_RXOCTET_GB_HI 0x0000090C
+#define XGMAC_MMC_RXOCTET_G_LO 0x00000910
+#define XGMAC_MMC_RXOCTET_G_HI 0x00000914
+#define XGMAC_MMC_RXBCFRAME_G 0x00000918
+#define XGMAC_MMC_RXMCFRAME_G 0x00000920
+#define XGMAC_MMC_RXCRCERR 0x00000928
+#define XGMAC_MMC_RXRUNT 0x00000930
+#define XGMAC_MMC_RXJABBER 0x00000934
+#define XGMAC_MMC_RXUCFRAME_G 0x00000970
+#define XGMAC_MMC_RXLENGTHERR 0x00000978
+#define XGMAC_MMC_RXPAUSEFRAME 0x00000988
+#define XGMAC_MMC_RXOVERFLOW 0x00000990
+#define XGMAC_MMC_RXVLANFRAME 0x00000998
+#define XGMAC_MMC_RXWATCHDOG 0x000009a0
+
+/* DMA Control and Status Registers */
+#define XGMAC_DMA_BUS_MODE 0x00000f00 /* Bus Mode */
+#define XGMAC_DMA_TX_POLL 0x00000f04 /* Transmit Poll Demand */
+#define XGMAC_DMA_RX_POLL 0x00000f08 /* Received Poll Demand */
+#define XGMAC_DMA_RX_BASE_ADDR 0x00000f0c /* Receive List Base */
+#define XGMAC_DMA_TX_BASE_ADDR 0x00000f10 /* Transmit List Base */
+#define XGMAC_DMA_STATUS 0x00000f14 /* Status Register */
+#define XGMAC_DMA_CONTROL 0x00000f18 /* Ctrl (Operational Mode) */
+#define XGMAC_DMA_INTR_ENA 0x00000f1c /* Interrupt Enable */
+#define XGMAC_DMA_MISS_FRAME_CTR 0x00000f20 /* Missed Frame Counter */
+#define XGMAC_DMA_RI_WDOG_TIMER 0x00000f24 /* RX Intr Watchdog Timer */
+#define XGMAC_DMA_AXI_BUS 0x00000f28 /* AXI Bus Mode */
+#define XGMAC_DMA_AXI_STATUS 0x00000f2C /* AXI Status */
+#define XGMAC_DMA_HW_FEATURE 0x00000f58 /* Enabled Hardware Features */
+
+#define XGMAC_ADDR_AE 0x80000000
+#define XGMAC_MAX_FILTER_ADDR 31
+
+/* PMT Control and Status */
+#define XGMAC_PMT_POINTER_RESET 0x80000000
+#define XGMAC_PMT_GLBL_UNICAST 0x00000200
+#define XGMAC_PMT_WAKEUP_RX_FRM 0x00000040
+#define XGMAC_PMT_MAGIC_PKT 0x00000020
+#define XGMAC_PMT_WAKEUP_FRM_EN 0x00000004
+#define XGMAC_PMT_MAGIC_PKT_EN 0x00000002
+#define XGMAC_PMT_POWERDOWN 0x00000001
+
+#define XGMAC_CONTROL_SPD 0x40000000 /* Speed control */
+#define XGMAC_CONTROL_SPD_MASK 0x60000000
+#define XGMAC_CONTROL_SPD_1G 0x60000000
+#define XGMAC_CONTROL_SPD_2_5G 0x40000000
+#define XGMAC_CONTROL_SPD_10G 0x00000000
+#define XGMAC_CONTROL_SARC 0x10000000 /* Source Addr Insert/Replace */
+#define XGMAC_CONTROL_SARK_MASK 0x18000000
+#define XGMAC_CONTROL_CAR 0x04000000 /* CRC Addition/Replacement */
+#define XGMAC_CONTROL_CAR_MASK 0x06000000
+#define XGMAC_CONTROL_DP 0x01000000 /* Disable Padding */
+#define XGMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on rx */
+#define XGMAC_CONTROL_JD 0x00400000 /* Jabber disable */
+#define XGMAC_CONTROL_JE 0x00100000 /* Jumbo frame */
+#define XGMAC_CONTROL_LM 0x00001000 /* Loop-back mode */
+#define XGMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */
+#define XGMAC_CONTROL_ACS 0x00000080 /* Automatic Pad/FCS Strip */
+#define XGMAC_CONTROL_DDIC 0x00000010 /* Disable Deficit Idle Count */
+#define XGMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */
+#define XGMAC_CONTROL_RE 0x00000004 /* Receiver Enable */
+
+/* XGMAC Frame Filter defines */
+#define XGMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */
+#define XGMAC_FRAME_FILTER_HUC 0x00000002 /* Hash Unicast */
+#define XGMAC_FRAME_FILTER_HMC 0x00000004 /* Hash Multicast */
+#define XGMAC_FRAME_FILTER_DAIF 0x00000008 /* DA Inverse Filtering */
+#define XGMAC_FRAME_FILTER_PM 0x00000010 /* Pass all multicast */
+#define XGMAC_FRAME_FILTER_DBF 0x00000020 /* Disable Broadcast frames */
+#define XGMAC_FRAME_FILTER_SAIF 0x00000100 /* Inverse Filtering */
+#define XGMAC_FRAME_FILTER_SAF 0x00000200 /* Source Address Filter */
+#define XGMAC_FRAME_FILTER_HPF 0x00000400 /* Hash or perfect Filter */
+#define XGMAC_FRAME_FILTER_VHF 0x00000800 /* VLAN Hash Filter */
+#define XGMAC_FRAME_FILTER_VPF 0x00001000 /* VLAN Perfect Filter */
+#define XGMAC_FRAME_FILTER_RA 0x80000000 /* Receive all mode */
+
+#define FIFO_MINUS_1K 0x0
+#define FIFO_MINUS_2K 0x1
+#define FIFO_MINUS_3K 0x2
+#define FIFO_MINUS_4K 0x3
+#define FIFO_MINUS_6K 0x4
+#define FIFO_MINUS_8K 0x5
+#define FIFO_MINUS_12K 0x6
+#define FIFO_MINUS_16K 0x7
+
+/* XGMAC FLOW CTRL defines */
+#define XGMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */
+#define XGMAC_FLOW_CTRL_PT_SHIFT 16
+#define XGMAC_FLOW_CTRL_DZQP 0x00000080 /* Disable Zero-Quanta Phase */
+#define XGMAC_FLOW_CTRL_PLT 0x00000020 /* Pause Low Threshhold */
+#define XGMAC_FLOW_CTRL_PLT_SHIFT 4
+#define XGMAC_FLOW_CTRL_PLT_MASK 0x00000030 /* PLT MASK */
+#define XGMAC_FLOW_CTRL_UP 0x00000008 /* Unicast Pause Frame Detect */
+#define XGMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */
+#define XGMAC_FLOW_CTRL_TFE 0x00000002 /* Tx Flow Control Enable */
+#define XGMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */
+
+/* XGMAC_INT_STAT reg */
+#define XGMAC_INT_STAT_PMT 0x0080 /* PMT Interrupt Status */
+#define XGMAC_INT_STAT_LPI 0x0040 /* LPI Interrupt Status */
+
+/* DMA Bus Mode register defines */
+#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */
+#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */
+#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */
+#define DMA_BUS_MODE_ATDS 0x00000080 /* Alternate Descriptor Size */
+
+/* Programmable burst length */
+#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */
+#define DMA_BUS_MODE_PBL_SHIFT 8
+#define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */
+#define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */
+#define DMA_BUS_MODE_RPBL_SHIFT 17
+#define DMA_BUS_MODE_USP 0x00800000
+#define DMA_BUS_MODE_8PBL 0x01000000
+#define DMA_BUS_MODE_AAL 0x02000000
+
+#define DMA_AXIMODE_ENLPI 0x80000000
+#define DMA_AXIMODE_MGK 0x40000000
+#define DMA_AXIMODE_WROSR 0x00100000
+#define DMA_AXIMODE_WROSR_MASK 0x00F00000
+#define DMA_AXIMODE_WROSR_SHIFT 20
+#define DMA_AXIMODE_RDOSR 0x00010000
+#define DMA_AXIMODE_RDOSR_MASK 0x000F0000
+#define DMA_AXIMODE_RDOSR_SHIFT 16
+#define DMA_AXIMODE_AAL 0x00001000
+#define DMA_AXIMODE_BLEN256 0x00000080
+#define DMA_AXIMODE_BLEN128 0x00000040
+#define DMA_AXIMODE_BLEN64 0x00000020
+#define DMA_AXIMODE_BLEN32 0x00000010
+#define DMA_AXIMODE_BLEN16 0x00000008
+#define DMA_AXIMODE_BLEN8 0x00000004
+#define DMA_AXIMODE_BLEN4 0x00000002
+#define DMA_AXIMODE_UNDEF 0x00000001
+
+/* DMA Bus Mode register defines */
+#define DMA_BUS_PR_RATIO_MASK 0x0000c000 /* Rx/Tx priority ratio */
+#define DMA_BUS_PR_RATIO_SHIFT 14
+#define DMA_BUS_FB 0x00010000 /* Fixed Burst */
+
+/* DMA Control register defines */
+#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */
+#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */
+#define DMA_CONTROL_DFF 0x01000000 /* Disable flush of rx frames */
+
+/* DMA Normal interrupt */
+#define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */
+#define DMA_INTR_ENA_AIE 0x00008000 /* Abnormal Summary */
+#define DMA_INTR_ENA_ERE 0x00004000 /* Early Receive */
+#define DMA_INTR_ENA_FBE 0x00002000 /* Fatal Bus Error */
+#define DMA_INTR_ENA_ETE 0x00000400 /* Early Transmit */
+#define DMA_INTR_ENA_RWE 0x00000200 /* Receive Watchdog */
+#define DMA_INTR_ENA_RSE 0x00000100 /* Receive Stopped */
+#define DMA_INTR_ENA_RUE 0x00000080 /* Receive Buffer Unavailable */
+#define DMA_INTR_ENA_RIE 0x00000040 /* Receive Interrupt */
+#define DMA_INTR_ENA_UNE 0x00000020 /* Tx Underflow */
+#define DMA_INTR_ENA_OVE 0x00000010 /* Receive Overflow */
+#define DMA_INTR_ENA_TJE 0x00000008 /* Transmit Jabber */
+#define DMA_INTR_ENA_TUE 0x00000004 /* Transmit Buffer Unavail */
+#define DMA_INTR_ENA_TSE 0x00000002 /* Transmit Stopped */
+#define DMA_INTR_ENA_TIE 0x00000001 /* Transmit Interrupt */
+
+#define DMA_INTR_NORMAL (DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \
+ DMA_INTR_ENA_TUE)
+
+#define DMA_INTR_ABNORMAL (DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \
+ DMA_INTR_ENA_RWE | DMA_INTR_ENA_RSE | \
+ DMA_INTR_ENA_RUE | DMA_INTR_ENA_UNE | \
+ DMA_INTR_ENA_OVE | DMA_INTR_ENA_TJE | \
+ DMA_INTR_ENA_TSE)
+
+/* DMA default interrupt mask */
+#define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
+
+/* DMA Status register defines */
+#define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */
+#define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int */
+#define DMA_STATUS_EB_MASK 0x00380000 /* Error Bits Mask */
+#define DMA_STATUS_EB_TX_ABORT 0x00080000 /* Error Bits - TX Abort */
+#define DMA_STATUS_EB_RX_ABORT 0x00100000 /* Error Bits - RX Abort */
+#define DMA_STATUS_TS_MASK 0x00700000 /* Transmit Process State */
+#define DMA_STATUS_TS_SHIFT 20
+#define DMA_STATUS_RS_MASK 0x000e0000 /* Receive Process State */
+#define DMA_STATUS_RS_SHIFT 17
+#define DMA_STATUS_NIS 0x00010000 /* Normal Interrupt Summary */
+#define DMA_STATUS_AIS 0x00008000 /* Abnormal Interrupt Summary */
+#define DMA_STATUS_ERI 0x00004000 /* Early Receive Interrupt */
+#define DMA_STATUS_FBI 0x00002000 /* Fatal Bus Error Interrupt */
+#define DMA_STATUS_ETI 0x00000400 /* Early Transmit Interrupt */
+#define DMA_STATUS_RWT 0x00000200 /* Receive Watchdog Timeout */
+#define DMA_STATUS_RPS 0x00000100 /* Receive Process Stopped */
+#define DMA_STATUS_RU 0x00000080 /* Receive Buffer Unavailable */
+#define DMA_STATUS_RI 0x00000040 /* Receive Interrupt */
+#define DMA_STATUS_UNF 0x00000020 /* Transmit Underflow */
+#define DMA_STATUS_OVF 0x00000010 /* Receive Overflow */
+#define DMA_STATUS_TJT 0x00000008 /* Transmit Jabber Timeout */
+#define DMA_STATUS_TU 0x00000004 /* Transmit Buffer Unavail */
+#define DMA_STATUS_TPS 0x00000002 /* Transmit Process Stopped */
+#define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */
+
+/* Common MAC defines */
+#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */
+#define MAC_ENABLE_RX 0x00000004 /* Receiver Enable */
+
+/* XGMAC Operation Mode Register */
+#define XGMAC_OMR_TSF 0x00200000 /* TX FIFO Store and Forward */
+#define XGMAC_OMR_FTF 0x00100000 /* Flush Transmit FIFO */
+#define XGMAC_OMR_TTC 0x00020000 /* Transmit Threshhold Ctrl */
+#define XGMAC_OMR_TTC_SHIFT 16
+#define XGMAC_OMR_TTC_MASK 0x00030000
+#define XGMAC_OMR_RFD 0x00006000 /* FC Deactivation Threshhold */
+#define XGMAC_OMR_RFD_SHIFT 12
+#define XGMAC_OMR_RFD_MASK 0x00007000 /* FC Deact Threshhold MASK */
+#define XGMAC_OMR_RFA 0x00000600 /* FC Activation Threshhold */
+#define XGMAC_OMR_RFA_SHIFT 9
+#define XGMAC_OMR_RFA_MASK 0x00000E00 /* FC Act Threshhold MASK */
+#define XGMAC_OMR_EFC 0x00000100 /* Enable Hardware FC */
+#define XGMAC_OMR_FEF 0x00000080 /* Forward Error Frames */
+#define XGMAC_OMR_DT 0x00000040 /* Drop TCP/IP csum Errors */
+#define XGMAC_OMR_RSF 0x00000020 /* RX FIFO Store and Forward */
+#define XGMAC_OMR_RTC_256 0x00000018 /* RX Threshhold Ctrl */
+#define XGMAC_OMR_RTC_MASK 0x00000018 /* RX Threshhold Ctrl MASK */
+
+/* XGMAC HW Features Register */
+#define DMA_HW_FEAT_TXCOESEL 0x00010000 /* TX Checksum offload */
+
+#define XGMAC_MMC_CTRL_CNT_FRZ 0x00000008
+
+/* XGMAC Descriptor Defines */
+#define MAX_DESC_BUF_SZ (0x2000 - 8)
+
+#define RXDESC_EXT_STATUS 0x00000001
+#define RXDESC_CRC_ERR 0x00000002
+#define RXDESC_RX_ERR 0x00000008
+#define RXDESC_RX_WDOG 0x00000010
+#define RXDESC_FRAME_TYPE 0x00000020
+#define RXDESC_GIANT_FRAME 0x00000080
+#define RXDESC_LAST_SEG 0x00000100
+#define RXDESC_FIRST_SEG 0x00000200
+#define RXDESC_VLAN_FRAME 0x00000400
+#define RXDESC_OVERFLOW_ERR 0x00000800
+#define RXDESC_LENGTH_ERR 0x00001000
+#define RXDESC_SA_FILTER_FAIL 0x00002000
+#define RXDESC_DESCRIPTOR_ERR 0x00004000
+#define RXDESC_ERROR_SUMMARY 0x00008000
+#define RXDESC_FRAME_LEN_OFFSET 16
+#define RXDESC_FRAME_LEN_MASK 0x3fff0000
+#define RXDESC_DA_FILTER_FAIL 0x40000000
+
+#define RXDESC1_END_RING 0x00008000
+
+#define RXDESC_IP_PAYLOAD_MASK 0x00000003
+#define RXDESC_IP_PAYLOAD_UDP 0x00000001
+#define RXDESC_IP_PAYLOAD_TCP 0x00000002
+#define RXDESC_IP_PAYLOAD_ICMP 0x00000003
+#define RXDESC_IP_HEADER_ERR 0x00000008
+#define RXDESC_IP_PAYLOAD_ERR 0x00000010
+#define RXDESC_IPV4_PACKET 0x00000040
+#define RXDESC_IPV6_PACKET 0x00000080
+#define TXDESC_UNDERFLOW_ERR 0x00000001
+#define TXDESC_JABBER_TIMEOUT 0x00000002
+#define TXDESC_LOCAL_FAULT 0x00000004
+#define TXDESC_REMOTE_FAULT 0x00000008
+#define TXDESC_VLAN_FRAME 0x00000010
+#define TXDESC_FRAME_FLUSHED 0x00000020
+#define TXDESC_IP_HEADER_ERR 0x00000040
+#define TXDESC_PAYLOAD_CSUM_ERR 0x00000080
+#define TXDESC_ERROR_SUMMARY 0x00008000
+#define TXDESC_SA_CTRL_INSERT 0x00040000
+#define TXDESC_SA_CTRL_REPLACE 0x00080000
+#define TXDESC_2ND_ADDR_CHAINED 0x00100000
+#define TXDESC_END_RING 0x00200000
+#define TXDESC_CSUM_IP 0x00400000
+#define TXDESC_CSUM_IP_PAYLD 0x00800000
+#define TXDESC_CSUM_ALL 0x00C00000
+#define TXDESC_CRC_EN_REPLACE 0x01000000
+#define TXDESC_CRC_EN_APPEND 0x02000000
+#define TXDESC_DISABLE_PAD 0x04000000
+#define TXDESC_FIRST_SEG 0x10000000
+#define TXDESC_LAST_SEG 0x20000000
+#define TXDESC_INTERRUPT 0x40000000
+
+#define DESC_OWN 0x80000000
+#define DESC_BUFFER1_SZ_MASK 0x00001fff
+#define DESC_BUFFER2_SZ_MASK 0x1fff0000
+#define DESC_BUFFER2_SZ_OFFSET 16
+
+struct xgmac_dma_desc {
+ __le32 flags;
+ __le32 buf_size;
+ __le32 buf1_addr; /* Buffer 1 Address Pointer */
+ __le32 buf2_addr; /* Buffer 2 Address Pointer */
+ __le32 ext_status;
+ __le32 res[3];
+};
+
+struct xgmac_priv {
+ struct xgmac_dma_desc *rx_chain;
+ struct xgmac_dma_desc *tx_chain;
+ char *rxbuffer;
+
+ u32 tx_currdesc;
+ u32 rx_currdesc;
+
+ void __iomem *base;
+
+ struct eth_device edev;
+ struct device_d *dev;
+};
+
+/* XGMAC Descriptor Access Helpers */
+static inline void desc_set_buf_len(struct xgmac_dma_desc *p, u32 buf_sz)
+{
+ if (buf_sz > MAX_DESC_BUF_SZ)
+ p->buf_size = cpu_to_le32(MAX_DESC_BUF_SZ |
+ (buf_sz - MAX_DESC_BUF_SZ) << DESC_BUFFER2_SZ_OFFSET);
+ else
+ p->buf_size = cpu_to_le32(buf_sz);
+}
+
+static inline int desc_get_buf_len(struct xgmac_dma_desc *p)
+{
+ u32 len = le32_to_cpu(p->buf_size);
+ return (len & DESC_BUFFER1_SZ_MASK) +
+ ((len & DESC_BUFFER2_SZ_MASK) >> DESC_BUFFER2_SZ_OFFSET);
+}
+
+static inline void desc_init_rx_desc(struct xgmac_dma_desc *p, int ring_size,
+ int buf_sz)
+{
+ struct xgmac_dma_desc *end = p + ring_size - 1;
+
+ memset(p, 0, sizeof(*p) * ring_size);
+
+ for (; p <= end; p++)
+ desc_set_buf_len(p, buf_sz);
+
+ end->buf_size |= cpu_to_le32(RXDESC1_END_RING);
+}
+
+static inline void desc_init_tx_desc(struct xgmac_dma_desc *p, u32 ring_size)
+{
+ memset(p, 0, sizeof(*p) * ring_size);
+ p[ring_size - 1].flags = cpu_to_le32(TXDESC_END_RING);
+}
+
+static inline int desc_get_owner(struct xgmac_dma_desc *p)
+{
+ return le32_to_cpu(p->flags) & DESC_OWN;
+}
+
+static inline void desc_set_rx_owner(struct xgmac_dma_desc *p)
+{
+ /* Clear all fields and set the owner */
+ p->flags = cpu_to_le32(DESC_OWN);
+}
+
+static inline void desc_set_tx_owner(struct xgmac_dma_desc *p, u32 flags)
+{
+ u32 tmpflags = le32_to_cpu(p->flags);
+ tmpflags &= TXDESC_END_RING;
+ tmpflags |= flags | DESC_OWN;
+ p->flags = cpu_to_le32(tmpflags);
+}
+
+static inline void *desc_get_buf_addr(struct xgmac_dma_desc *p)
+{
+ return (void *)le32_to_cpu(p->buf1_addr);
+}
+
+static inline void desc_set_buf_addr(struct xgmac_dma_desc *p,
+ void *paddr, int len)
+{
+ p->buf1_addr = cpu_to_le32(paddr);
+ if (len > MAX_DESC_BUF_SZ)
+ p->buf2_addr = cpu_to_le32(paddr + MAX_DESC_BUF_SZ);
+}
+
+static inline void desc_set_buf_addr_and_size(struct xgmac_dma_desc *p,
+ void *paddr, int len)
+{
+ desc_set_buf_len(p, len);
+ desc_set_buf_addr(p, paddr, len);
+}
+
+static inline int desc_get_rx_frame_len(struct xgmac_dma_desc *p)
+{
+ u32 data = le32_to_cpu(p->flags);
+ u32 len = (data & RXDESC_FRAME_LEN_MASK) >> RXDESC_FRAME_LEN_OFFSET;
+ if (data & RXDESC_FRAME_TYPE)
+ len -= 4;
+
+ return len;
+}
+
+/*
+ * Initialize a descriptor ring. Calxeda XGMAC is configured to use
+ * advanced descriptors.
+ */
+
+static void init_rx_desc(struct xgmac_priv *priv)
+{
+ struct xgmac_dma_desc *rxdesc = priv->rx_chain;
+ void *rxbuffer = priv->rxbuffer;
+ int i;
+
+ desc_init_rx_desc(rxdesc, RX_NUM_DESC, ETH_BUF_SZ);
+ writel((ulong)rxdesc, priv->base + XGMAC_DMA_RX_BASE_ADDR);
+
+ for (i = 0; i < RX_NUM_DESC; i++) {
+ desc_set_buf_addr(rxdesc + i, rxbuffer + (i * ETH_BUF_SZ),
+ ETH_BUF_SZ);
+ desc_set_rx_owner(rxdesc + i);
+ }
+}
+
+static void init_tx_desc(struct xgmac_priv *priv)
+{
+ desc_init_tx_desc(priv->tx_chain, TX_NUM_DESC);
+ writel((ulong)priv->tx_chain, priv->base + XGMAC_DMA_TX_BASE_ADDR);
+}
+
+static int xgmac_reset(struct eth_device *dev)
+{
+ struct xgmac_priv *priv = dev->priv;
+ int ret;
+ u32 value;
+
+ value = readl(priv->base + XGMAC_CONTROL) & XGMAC_CONTROL_SPD_MASK;
+
+ writel(DMA_BUS_MODE_SFT_RESET, priv->base + XGMAC_DMA_BUS_MODE);
+
+ ret = wait_on_timeout(100 * MSECOND,
+ !(readl(priv->base + XGMAC_DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
+
+ writel(value, priv->base + XGMAC_CONTROL);
+
+ return ret;
+}
+
+static int xgmac_open(struct eth_device *edev)
+{
+ struct xgmac_priv *priv = edev->priv;
+ int value;
+ int ret;
+
+ ret = xgmac_reset(edev);
+ if (ret)
+ return ret;
+
+ /* set the AXI bus modes */
+ value = DMA_BUS_MODE_ATDS |
+ (16 << DMA_BUS_MODE_PBL_SHIFT) |
+ DMA_BUS_MODE_FB | DMA_BUS_MODE_AAL;
+ writel(value, priv->base + XGMAC_DMA_BUS_MODE);
+
+ value = DMA_AXIMODE_AAL | DMA_AXIMODE_BLEN16 |
+ DMA_AXIMODE_BLEN8 | DMA_AXIMODE_BLEN4;
+ writel(value, priv->base + XGMAC_DMA_AXI_BUS);
+
+ /* set flow control parameters and store and forward mode */
+ value = (FIFO_MINUS_12K << XGMAC_OMR_RFD_SHIFT) |
+ (FIFO_MINUS_4K << XGMAC_OMR_RFA_SHIFT) |
+ XGMAC_OMR_EFC | XGMAC_OMR_TSF | XGMAC_OMR_RSF;
+ writel(value, priv->base + XGMAC_OMR);
+
+ /* enable pause frames */
+ value = (1024 << XGMAC_FLOW_CTRL_PT_SHIFT) |
+ (1 << XGMAC_FLOW_CTRL_PLT_SHIFT) |
+ XGMAC_FLOW_CTRL_UP | XGMAC_FLOW_CTRL_RFE | XGMAC_FLOW_CTRL_TFE;
+ writel(value, priv->base + XGMAC_FLOW_CTRL);
+
+ /* Initialize the descriptor chains */
+ init_rx_desc(priv);
+ init_tx_desc(priv);
+
+ /* must set to 0, or when started up will cause issues */
+ priv->tx_currdesc = 0;
+ priv->rx_currdesc = 0;
+
+ /* set default core values */
+ value = readl(priv->base + XGMAC_CONTROL);
+ value &= XGMAC_CONTROL_SPD_MASK;
+ value |= XGMAC_CONTROL_DDIC | XGMAC_CONTROL_ACS |
+ XGMAC_CONTROL_IPC | XGMAC_CONTROL_CAR;
+
+ /* Everything is ready enable both mac and DMA */
+ value |= XGMAC_CONTROL_RE | XGMAC_CONTROL_TE;
+ writel(value, priv->base + XGMAC_CONTROL);
+
+ value = readl(priv->base + XGMAC_DMA_CONTROL);
+ value |= DMA_CONTROL_SR | DMA_CONTROL_ST;
+ writel(value, priv->base + XGMAC_DMA_CONTROL);
+
+ return 0;
+}
+
+static int xgmac_send(struct eth_device *edev, void *packet, int length)
+{
+ struct xgmac_priv *priv = edev->priv;
+ u32 currdesc = priv->tx_currdesc;
+ struct xgmac_dma_desc *txdesc = &priv->tx_chain[currdesc];
+ int ret;
+
+ dma_flush_range((ulong) packet, (ulong)packet + length);
+ desc_set_buf_addr_and_size(txdesc, packet, length);
+ desc_set_tx_owner(txdesc, TXDESC_FIRST_SEG |
+ TXDESC_LAST_SEG | TXDESC_CRC_EN_APPEND);
+
+ /* write poll demand */
+ writel(1, priv->base + XGMAC_DMA_TX_POLL);
+
+ ret = wait_on_timeout(1 * SECOND, !desc_get_owner(txdesc));
+ if (ret) {
+ dev_err(priv->dev, "TX timeout\n");
+ return ret;
+ }
+
+ priv->tx_currdesc = (currdesc + 1) & (TX_NUM_DESC - 1);
+ return 0;
+}
+
+static int xgmac_recv(struct eth_device *edev)
+{
+ struct xgmac_priv *priv = edev->priv;
+ u32 currdesc = priv->rx_currdesc;
+ struct xgmac_dma_desc *rxdesc = &priv->rx_chain[currdesc];
+ int length = 0;
+
+ /* check if the host has the desc */
+ if (desc_get_owner(rxdesc))
+ return -1; /* something bad happened */
+
+ length = desc_get_rx_frame_len(rxdesc);
+
+ net_receive(desc_get_buf_addr(rxdesc), length);
+
+ /* set descriptor back to owned by XGMAC */
+ desc_set_rx_owner(rxdesc);
+ writel(1, priv->base + XGMAC_DMA_RX_POLL);
+
+ priv->rx_currdesc = (currdesc + 1) & (RX_NUM_DESC - 1);
+
+ return length;
+}
+
+static void xgmac_halt(struct eth_device *edev)
+{
+ struct xgmac_priv *priv = edev->priv;
+ int value;
+
+ /* Disable TX/RX */
+ value = readl(priv->base + XGMAC_CONTROL);
+ value &= ~(XGMAC_CONTROL_RE | XGMAC_CONTROL_TE);
+ writel(value, priv->base + XGMAC_CONTROL);
+
+ /* Disable DMA */
+ value = readl(priv->base + XGMAC_DMA_CONTROL);
+ value &= ~(DMA_CONTROL_SR | DMA_CONTROL_ST);
+ writel(value, priv->base + XGMAC_DMA_CONTROL);
+
+ /* must set to 0, or when started up will cause issues */
+ priv->tx_currdesc = 0;
+ priv->rx_currdesc = 0;
+}
+
+static int xgmac_get_ethaddr(struct eth_device *edev, unsigned char *addr)
+{
+ struct xgmac_priv *priv = edev->priv;
+ u32 hi_addr, lo_addr;
+
+ /* Read the MAC address from the hardware */
+ hi_addr = readl(priv->base + XGMAC_ADDR_HIGH(0));
+ lo_addr = readl(priv->base + XGMAC_ADDR_LOW(0));
+
+ /* Extract the MAC address from the high and low words */
+ addr[0] = lo_addr & 0xff;
+ addr[1] = (lo_addr >> 8) & 0xff;
+ addr[2] = (lo_addr >> 16) & 0xff;
+ addr[3] = (lo_addr >> 24) & 0xff;
+ addr[4] = hi_addr & 0xff;
+ addr[5] = (hi_addr >> 8) & 0xff;
+
+ return 0;
+}
+
+static int xgmac_set_ethaddr(struct eth_device *dev, unsigned char *addr)
+{
+ struct xgmac_priv *priv = dev->priv;
+ u32 data;
+
+ data = (addr[5] << 8) | addr[4];
+ writel(data, priv->base + XGMAC_ADDR_HIGH(0));
+ data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
+ writel(data, priv->base + XGMAC_ADDR_LOW(0));
+
+ return 0;
+}
+
+static int hb_xgmac_probe(struct device_d *dev)
+{
+ struct eth_device *edev;
+ struct xgmac_priv *priv;
+ void __iomem *base;
+
+ base = dev_request_mem_region(dev, 0);
+
+ /* check hardware version */
+ if (readl(base + XGMAC_VERSION) != 0x1012)
+ return -EINVAL;
+
+ priv = xzalloc(sizeof(*priv));
+
+ priv->dev = dev;
+ priv->base = base;
+
+ priv->rxbuffer = dma_alloc_coherent(RX_BUF_SZ);
+ priv->rx_chain = dma_alloc_coherent(RX_NUM_DESC * sizeof(struct xgmac_dma_desc));
+ priv->tx_chain = dma_alloc_coherent(TX_NUM_DESC * sizeof(struct xgmac_dma_desc));
+
+ edev = &priv->edev;
+ edev->priv = priv;
+
+ edev->open = xgmac_open;
+ edev->send = xgmac_send;
+ edev->recv = xgmac_recv;
+ edev->halt = xgmac_halt;
+ edev->get_ethaddr = xgmac_get_ethaddr;
+ edev->set_ethaddr = xgmac_set_ethaddr;
+ edev->parent = dev;
+
+ eth_register(edev);
+
+ return 0;
+}
+
+static struct driver_d hb_xgmac_driver = {
+ .name = "hb-xgmac",
+ .probe = hb_xgmac_probe,
+};
+
+static int hb_xgmac_driver_init(void)
+{
+ debug("%s\n", __func__);
+ return platform_driver_register(&hb_xgmac_driver);
+}
+device_initcall(hb_xgmac_driver_init);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-02-11 17:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-11 17:10 [PATCH 0/3] arm: add Calxeda Highbank support Jean-Christophe PLAGNIOL-VILLARD
2013-02-11 17:13 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-02-11 17:13 ` [PATCH 2/3] arm: add highbank support Jean-Christophe PLAGNIOL-VILLARD
2013-02-11 17:13 ` [PATCH 3/3] highbank: add l2x0 support Jean-Christophe PLAGNIOL-VILLARD
2013-02-11 19:06 [PATCH 0/3 v2] arm: add Calxeda Highbank support Jean-Christophe PLAGNIOL-VILLARD
2013-02-11 19:08 ` [PATCH 1/3] highbank: add xgmac support Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360602834-12373-1-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox