From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/5] ARM i.MX6: Fix HSIC pad definitions
Date: Thu, 14 Feb 2013 10:07:23 +0100 [thread overview]
Message-ID: <1360832847-22414-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1360832847-22414-1-git-send-email-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/include/mach/iomux-mx6.h | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-imx/include/mach/iomux-mx6.h b/arch/arm/mach-imx/include/mach/iomux-mx6.h
index f50fd8a..57d1a3b 100644
--- a/arch/arm/mach-imx/include/mach/iomux-mx6.h
+++ b/arch/arm/mach-imx/include/mach/iomux-mx6.h
@@ -83,6 +83,9 @@
MX6_PAD_CTL_DSE_40ohm | MX6_PAD_CTL_HYS | \
MX6_PAD_CTL_ODE | MX6_PAD_CTL_SRE_FAST)
+#define MX6Q_USB_HSIC_PAD_CTRL (MX6_PAD_CTL_HYS | MX6_PAD_CTL_PKE | MX6_PAD_CTL_PUE | \
+ MX6_PAD_CTL_DSE_40ohm)
+
#define MX6Q_HIGH_DRV (MX6_PAD_CTL_DSE_120ohm)
#define _MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 \
@@ -135,7 +138,7 @@
IOMUX_PAD(0x0368, 0x0054, 7, 0x0000, 0, 0)
#define _MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA \
- IOMUX_PAD(0x036C, 0x0058, 0, 0x0000, 0, 0)
+ IOMUX_PAD(0x036C, 0x0058, IOMUX_CONFIG_SION, 0x0000, 0, 0)
#define _MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC \
IOMUX_PAD(0x036C, 0x0058, 1, 0x0000, 0, 0)
#define _MX6Q_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK \
@@ -188,7 +191,7 @@
IOMUX_PAD(0x037C, 0x0068, 6, 0x0000, 0, 0)
#define _MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA \
- IOMUX_PAD(0x0380, 0x006C, 0, 0x0000, 0, 0)
+ IOMUX_PAD(0x0380, 0x006C, IOMUX_CONFIG_SION, 0x0000, 0, 0)
#define _MX6Q_PAD_RGMII_RX_CTL__ENET_RGMII_RX_CTL \
IOMUX_PAD(0x0380, 0x006C, 1, 0x0858, 0, 0)
#define _MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 \
@@ -206,7 +209,7 @@
IOMUX_PAD(0x0384, 0x0070, 6, 0x0000, 0, 0)
#define _MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE \
- IOMUX_PAD(0x0388, 0x0074, 0, 0x0000, 0, 0)
+ IOMUX_PAD(0x0388, 0x0074, IOMUX_CONFIG_SION, 0x0000, 0, 0)
#define _MX6Q_PAD_RGMII_TX_CTL__ENET_RGMII_TX_CTL \
IOMUX_PAD(0x0388, 0x0074, 1, 0x0000, 0, 0)
#define _MX6Q_PAD_RGMII_TX_CTL__GPIO_6_26 \
@@ -246,7 +249,7 @@
IOMUX_PAD(0x0394, 0x0080, 6, 0x0000, 0, 0)
#define _MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE \
- IOMUX_PAD(0x0398, 0x0084, 0, 0x0000, 0, 0)
+ IOMUX_PAD(0x0398, 0x0084, IOMUX_CONFIG_SION, 0x0000, 0, 0)
#define _MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC \
IOMUX_PAD(0x0398, 0x0084, 1, 0x0844, 0, 0)
#define _MX6Q_PAD_RGMII_RXC__GPIO_6_30 \
@@ -3695,7 +3698,7 @@
#define MX6Q_PAD_SD2_DAT0__DCIC2_DCIC_OUT (_MX6Q_PAD_SD2_DAT0__DCIC2_DCIC_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX6Q_PAD_SD2_DAT0__ANATOP_ANATOP_TESTO_2 (_MX6Q_PAD_SD2_DAT0__ANATOP_ANATOP_TESTO_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA (_MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA (_MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA | MUX_PAD_CTRL(MX6Q_USB_HSIC_PAD_CTRL))
#define MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC (_MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL))
#define MX6Q_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK (_MX6Q_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX6Q_PAD_RGMII_TXC__GPIO_6_19 (_MX6Q_PAD_RGMII_TXC__GPIO_6_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -3724,7 +3727,7 @@
#define MX6Q_PAD_RGMII_TD3__GPIO_6_23 (_MX6Q_PAD_RGMII_TD3__GPIO_6_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX6Q_PAD_RGMII_TD3__MIPI_CORE_DPHY_TEST_IN_4 (_MX6Q_PAD_RGMII_TD3__MIPI_CORE_DPHY_TEST_IN_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA (_MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA (_MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA | MUX_PAD_CTRL(MX6Q_USB_HSIC_PAD_CTRL))
#define MX6Q_PAD_RGMII_RX_CTL__ENET_RGMII_RX_CTL (_MX6Q_PAD_RGMII_RX_CTL__ENET_RGMII_RX_CTL | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL))
#define MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 (_MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX6Q_PAD_RGMII_RX_CTL__MIPI_CORE_DPHY_TEST_IN_5 (_MX6Q_PAD_RGMII_RX_CTL__MIPI_CORE_DPHY_TEST_IN_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -3734,7 +3737,7 @@
#define MX6Q_PAD_RGMII_RD0__GPIO_6_25 (_MX6Q_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX6Q_PAD_RGMII_RD0__MIPI_CORE_DPHY_TEST_IN_6 (_MX6Q_PAD_RGMII_RD0__MIPI_CORE_DPHY_TEST_IN_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE (_MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE (_MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE | MUX_PAD_CTRL(MX6Q_USB_HSIC_PAD_CTRL))
#define MX6Q_PAD_RGMII_TX_CTL__ENET_RGMII_TX_CTL (_MX6Q_PAD_RGMII_TX_CTL__ENET_RGMII_TX_CTL | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL))
#define MX6Q_PAD_RGMII_TX_CTL__GPIO_6_26 (_MX6Q_PAD_RGMII_TX_CTL__GPIO_6_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX6Q_PAD_RGMII_TX_CTL__MIPI_CORE_DPHY_TEST_IN_7 (_MX6Q_PAD_RGMII_TX_CTL__MIPI_CORE_DPHY_TEST_IN_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -3756,7 +3759,7 @@
#define MX6Q_PAD_RGMII_RD3__GPIO_6_29 (_MX6Q_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX6Q_PAD_RGMII_RD3__MIPI_CORE_DPHY_TEST_IN_10 (_MX6Q_PAD_RGMII_RD3__MIPI_CORE_DPHY_TEST_IN_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE (_MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE (_MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE | MUX_PAD_CTRL(MX6Q_USB_HSIC_PAD_CTRL))
#define MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC (_MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL))
#define MX6Q_PAD_RGMII_RXC__GPIO_6_30 (_MX6Q_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX6Q_PAD_RGMII_RXC__MIPI_CORE_DPHY_TEST_IN_11 (_MX6Q_PAD_RGMII_RXC__MIPI_CORE_DPHY_TEST_IN_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-02-14 9:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-14 9:07 [PATCH] USB i.MX: Add i.MX6 HSIC support Sascha Hauer
2013-02-14 9:07 ` Sascha Hauer [this message]
2013-02-14 9:07 ` [PATCH 2/5] USB chipidea i.MX: Fix PTS mask for HSIC Sascha Hauer
2013-02-14 9:07 ` [PATCH 3/5] USB ehci: Add platform specific init calls Sascha Hauer
2013-02-14 9:07 ` [PATCH 4/5] USB i.MX chipidea: implement post init support Sascha Hauer
2013-02-14 9:07 ` [PATCH 5/5] USB i.MX6: Add HSIC support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360832847-22414-2-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox