From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-ea0-f176.google.com ([209.85.215.176]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1U6IjF-0000ou-7D for barebox@lists.infradead.org; Fri, 15 Feb 2013 10:41:17 +0000 Received: by mail-ea0-f176.google.com with SMTP id a13so1438802eaa.35 for ; Fri, 15 Feb 2013 02:41:15 -0800 (PST) From: Fabio Porcedda Date: Fri, 15 Feb 2013 11:41:09 +0100 Message-Id: <1360924870-13979-2-git-send-email-fabio.porcedda@gmail.com> In-Reply-To: <1360924870-13979-1-git-send-email-fabio.porcedda@gmail.com> References: <1360924870-13979-1-git-send-email-fabio.porcedda@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 1/2] at91sam9260/9g20ek: use IS_ENABLED instead of #if/#ifdef To: barebox@lists.infradead.org Using IS_ENABLED instead of #if/#ifdef the compiler can check all the code. Using IS_ENABLED for configuring smc->mode is an optimization, reduce init.o text from 905 to 877. Signed-off-by: Fabio Porcedda Cc: Jean-Christophe PLAGNIOL-VILLARD --- arch/arm/boards/at91sam9260ek/init.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c index 06a53f2..bb0025d 100644 --- a/arch/arm/boards/at91sam9260ek/init.c +++ b/arch/arm/boards/at91sam9260ek/init.c @@ -37,9 +37,8 @@ static void ek_set_board_type(void) { if (machine_is_at91sam9g20ek()) { armlinux_set_architecture(MACH_TYPE_AT91SAM9G20EK); -#ifdef CONFIG_AT91_HAVE_2MMC - armlinux_set_revision(HAVE_2MMC); -#endif + if (IS_ENABLED(CONFIG_AT91_HAVE_2MMC)) + armlinux_set_revision(HAVE_2MMC); } else { armlinux_set_architecture(MACH_TYPE_AT91SAM9260EK); } @@ -107,10 +106,12 @@ static void ek_add_device_nand(void) smc = &ek_9260_nand_smc_config; /* setup bus-width (8 or 16) */ - if (nand_pdata.bus_width_16) + if (IS_ENABLED(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)) { + nand_pdata.bus_width_16 = 1; smc->mode |= AT91_SMC_DBW_16; - else + } else { smc->mode |= AT91_SMC_DBW_8; + } /* configure chip-select 3 (NAND) */ sam9_smc_configure(0, 3, smc); @@ -209,10 +210,10 @@ static void __init ek_add_led(void) { int i; -#ifdef CONFIG_AT91_HAVE_2MMC - leds[0].gpio = AT91_PIN_PB8; - leds[1].gpio = AT91_PIN_PB9; -#endif + if (IS_ENABLED(CONFIG_AT91_HAVE_2MMC)) { + leds[0].gpio = AT91_PIN_PB8; + leds[1].gpio = AT91_PIN_PB9; + } for (i = 0; i < ARRAY_SIZE(leds); i++) { at91_set_gpio_output(leds[i].gpio, leds[i].active_low); -- 1.8.1.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox