From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Subject: [PATCH 0/9] ARM: add support for Zynq
Date: Mon, 11 Mar 2013 10:14:57 +0100 [thread overview]
Message-ID: <1362993306-19262-1-git-send-email-s.trumtrar@pengutronix.de> (raw)
Hi!
This series adds basic support for Xilinx Zynq based SoCs.
Atm one can boot first stage from SD card and ... that is it.
Ethernet support is on its way, but not functional as of yet.
Regards,
str
Josh Cartwright (1):
ARM: zynq: add clk support for zynq7000
Steffen Trumtrar (8):
serial: Add driver for Cadence UART
ARM: Zynq: Add new architecture zynq
ARM: zynq: add zynq fsbl checksum script
ARM: zynq: Add support for the Avnet Zedboard
ARM: zynq: clk: replace define with header
ARM: zynq: clk: add pll type
ARM: zynq: clk: convert to platform driver
ARM: zynq: remove clocksource
arch/arm/Kconfig | 5 +
arch/arm/Makefile | 2 +
arch/arm/boards/avnet-zedboard/Makefile | 1 +
arch/arm/boards/avnet-zedboard/board.c | 38 ++
arch/arm/boards/avnet-zedboard/config.h | 4 +
.../boards/avnet-zedboard/env/init/config-board | 7 +
arch/arm/boards/avnet-zedboard/flash_header.c | 56 +++
arch/arm/boards/avnet-zedboard/lowlevel.c | 249 +++++++++++++
arch/arm/configs/zedboard_defconfig | 360 +++++++++++++++++++
arch/arm/mach-zynq/Kconfig | 35 ++
arch/arm/mach-zynq/Makefile | 1 +
arch/arm/mach-zynq/clk-zynq7000.c | 393 +++++++++++++++++++++
arch/arm/mach-zynq/devices.c | 14 +
arch/arm/mach-zynq/include/mach/barebox.lds.h | 9 +
arch/arm/mach-zynq/include/mach/clkdev.h | 6 +
arch/arm/mach-zynq/include/mach/debug_ll.h | 34 ++
arch/arm/mach-zynq/include/mach/devices.h | 13 +
.../arm/mach-zynq/include/mach/zynq-flash-header.h | 40 +++
arch/arm/mach-zynq/include/mach/zynq7000-regs.h | 132 +++++++
arch/arm/mach-zynq/zynq.c | 39 ++
drivers/serial/Kconfig | 4 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_cadence.c | 299 ++++++++++++++++
include/asm-generic/barebox.lds.h | 3 +-
scripts/Makefile | 1 +
scripts/zynq_checksum.c | 55 +++
26 files changed, 1800 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
create mode 100644 arch/arm/boards/avnet-zedboard/board.c
create mode 100644 arch/arm/boards/avnet-zedboard/config.h
create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
create mode 100644 arch/arm/configs/zedboard_defconfig
create mode 100644 arch/arm/mach-zynq/Kconfig
create mode 100644 arch/arm/mach-zynq/Makefile
create mode 100644 arch/arm/mach-zynq/clk-zynq7000.c
create mode 100644 arch/arm/mach-zynq/devices.c
create mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h
create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h
create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h
create mode 100644 arch/arm/mach-zynq/include/mach/devices.h
create mode 100644 arch/arm/mach-zynq/include/mach/zynq-flash-header.h
create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-regs.h
create mode 100644 arch/arm/mach-zynq/zynq.c
create mode 100644 drivers/serial/serial_cadence.c
create mode 100644 scripts/zynq_checksum.c
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2013-03-11 9:15 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-11 9:14 Steffen Trumtrar [this message]
2013-03-11 9:14 ` [PATCH 1/9] serial: Add driver for Cadence UART Steffen Trumtrar
2013-03-11 9:56 ` Sascha Hauer
2013-03-11 9:14 ` [PATCH 2/9] ARM: Zynq: Add new architecture zynq Steffen Trumtrar
2013-03-11 10:04 ` Sascha Hauer
2013-03-11 18:13 ` Josh Cartwright
2013-03-12 13:42 ` Josh Cartwright
2013-03-11 9:15 ` [PATCH 3/9] ARM: zynq: add zynq fsbl checksum script Steffen Trumtrar
2013-03-11 10:05 ` Sascha Hauer
2013-03-11 9:15 ` [PATCH 4/9] ARM: zynq: Add support for the Avnet Zedboard Steffen Trumtrar
2013-03-11 10:06 ` Sascha Hauer
2013-03-11 9:15 ` [PATCH 5/9] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
2013-03-11 9:15 ` [PATCH 6/9] ARM: zynq: clk: replace define with header Steffen Trumtrar
2013-03-11 18:29 ` Josh Cartwright
2013-03-11 18:55 ` Steffen Trumtrar
2013-03-11 9:15 ` [PATCH 7/9] ARM: zynq: clk: add pll type Steffen Trumtrar
2013-03-11 18:28 ` Josh Cartwright
2013-03-11 18:59 ` Steffen Trumtrar
2013-03-11 9:15 ` [PATCH 8/9] ARM: zynq: clk: convert to platform driver Steffen Trumtrar
2013-03-11 9:15 ` [PATCH 9/9] ARM: zynq: remove clocksource Steffen Trumtrar
2013-03-11 18:17 ` Josh Cartwright
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362993306-19262-1-git-send-email-s.trumtrar@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox