From: Alexander Shiyan <shc_work@mail.ru>
To: barebox@lists.infradead.org
Subject: [PATCH 09/13] ARM: clps711x: Migrate to using DEFINE_RES_MEM macro
Date: Mon, 11 Mar 2013 13:26:39 +0400 [thread overview]
Message-ID: <1362994003-22653-9-git-send-email-shc_work@mail.ru> (raw)
In-Reply-To: <1362994003-22653-1-git-send-email-shc_work@mail.ru>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/mach-clps711x/devices.c | 108 ++++++-------------------------------
1 files changed, 18 insertions(+), 90 deletions(-)
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
index f94b584..fba0159 100644
--- a/arch/arm/mach-clps711x/devices.c
+++ b/arch/arm/mach-clps711x/devices.c
@@ -51,49 +51,17 @@ void clps711x_setup_memcfg(int bank, u32 val)
}
static struct resource uart0_resources[] = {
- {
- .start = UBRLCR1,
- .end = UBRLCR1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SYSCON1,
- .end = SYSCON1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SYSFLG1,
- .end = SYSFLG1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = UARTDR1,
- .end = UARTDR1,
- .flags = IORESOURCE_MEM,
- },
+ DEFINE_RES_MEM(UBRLCR1, SZ_4),
+ DEFINE_RES_MEM(SYSCON1, SZ_4),
+ DEFINE_RES_MEM(SYSFLG1, SZ_4),
+ DEFINE_RES_MEM(UARTDR1, SZ_4),
};
static struct resource uart1_resources[] = {
- {
- .start = UBRLCR2,
- .end = UBRLCR2,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SYSCON2,
- .end = SYSCON2,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SYSFLG2,
- .end = SYSFLG2,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = UARTDR2,
- .end = UARTDR2,
- .flags = IORESOURCE_MEM,
- },
+ DEFINE_RES_MEM(UBRLCR2, SZ_4),
+ DEFINE_RES_MEM(SYSCON2, SZ_4),
+ DEFINE_RES_MEM(SYSFLG2, SZ_4),
+ DEFINE_RES_MEM(UARTDR2, SZ_4),
};
void clps711x_add_uart(unsigned int id)
@@ -113,68 +81,28 @@ void clps711x_add_uart(unsigned int id)
}
static struct resource gpio0_resources[] = {
- {
- .start = PADR,
- .end = PADR,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PADDR,
- .end = PADDR,
- .flags = IORESOURCE_MEM,
- },
+ DEFINE_RES_MEM(PADR, SZ_1),
+ DEFINE_RES_MEM(PADDR, SZ_1),
};
static struct resource gpio1_resources[] = {
- {
- .start = PBDR,
- .end = PBDR,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PBDDR,
- .end = PBDDR,
- .flags = IORESOURCE_MEM,
- },
+ DEFINE_RES_MEM(PBDR, SZ_1),
+ DEFINE_RES_MEM(PBDDR, SZ_1),
};
static struct resource gpio2_resources[] = {
- {
- .start = PCDR,
- .end = PCDR,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PCDDR,
- .end = PCDDR,
- .flags = IORESOURCE_MEM,
- },
+ DEFINE_RES_MEM(PCDR, SZ_1),
+ DEFINE_RES_MEM(PCDDR, SZ_1),
};
static struct resource gpio3_resources[] = {
- {
- .start = PDDR,
- .end = PDDR,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PDDDR,
- .end = PDDDR,
- .flags = IORESOURCE_MEM,
- },
+ DEFINE_RES_MEM(PDDR, SZ_1),
+ DEFINE_RES_MEM(PDDDR, SZ_1),
};
static struct resource gpio4_resources[] = {
- {
- .start = PEDR,
- .end = PEDR,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PEDDR,
- .end = PEDDR,
- .flags = IORESOURCE_MEM,
- },
+ DEFINE_RES_MEM(PEDR, SZ_1),
+ DEFINE_RES_MEM(PEDDR, SZ_1),
};
static __init int clps711x_gpio_init(void)
--
1.7.3.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-03-11 9:27 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-11 9:26 [PATCH 01/13] ARM: clep7212: Migrate to config-board Alexander Shiyan
2013-03-11 9:26 ` [PATCH 02/13] ARM: clps711x: Fix setup bus wait state scaling factor for 13Mhz mode Alexander Shiyan
2013-03-11 9:26 ` [PATCH 03/13] ARM: clps711x: Replace numeric PLL option with boolean for raise CPU frequency Alexander Shiyan
2013-03-11 9:26 ` [PATCH 04/13] ARM: clps711x: Add clocksource driver Alexander Shiyan
2013-03-11 11:01 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-11 11:10 ` Sascha Hauer
2013-03-11 16:22 ` Re[2]: " Alexander Shiyan
2013-03-11 18:00 ` Sascha Hauer
2013-03-11 18:17 ` Re[2]: " Alexander Shiyan
2013-03-11 9:26 ` [PATCH 05/13] ARM: clps711x: Using COMMON_CLK Alexander Shiyan
2013-03-11 11:00 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-11 11:26 ` Re[2]: " Alexander Shiyan
2013-03-11 11:58 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-11 9:26 ` [PATCH 06/13] Add Generic GPIO driver Alexander Shiyan
2013-03-11 9:26 ` [PATCH 07/13] ARM: clps711x: Add " Alexander Shiyan
2013-03-11 9:26 ` [PATCH 08/13] Add helpers to define resources Alexander Shiyan
2013-03-11 9:26 ` Alexander Shiyan [this message]
2013-03-11 9:26 ` [PATCH 10/13] ARM: clps711x: Limit chipselect setup up to CS5 Alexander Shiyan
2013-03-11 9:26 ` [PATCH 11/13] Add system controller register driver (SYSCON) Alexander Shiyan
2013-03-11 9:26 ` [PATCH 12/13] ARM: clps711x: Export system-wide registers through SYSCON driver Alexander Shiyan
2013-03-11 9:26 ` [PATCH 13/13] serial: clps711x: Migrate to using " Alexander Shiyan
2013-03-11 21:18 ` [PATCH 01/13] ARM: clep7212: Migrate to config-board Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362994003-22653-9-git-send-email-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox