* [PATCH v2 0/5] ARM: add support for Zynq
@ 2013-03-19 9:21 Steffen Trumtrar
2013-03-19 9:21 ` [PATCH v2 1/5] serial: Add driver for Cadence UART Steffen Trumtrar
` (5 more replies)
0 siblings, 6 replies; 21+ messages in thread
From: Steffen Trumtrar @ 2013-03-19 9:21 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
Hi!
Still nothing fancy. Boots a little faster from SD and has a console.
For ethernet the macb-driver works fine, but needs to be "freed" from its
at91 heritage (meaning: the struct at91_ether_platform_data should be
renamed first and defined someplace else than a board.h)
Changelog:
- addressed all comments by Sascha and Josh
(some uart stuff, defines, endianess, ...)
- squashed a little
Regards,
Steffen
Steffen Trumtrar (5):
serial: Add driver for Cadence UART
ARM: zynq: Add new architecture zynq
ARM: zynq: add clk support for zynq7000
ARM: zynq: add zynq fsbl checksum script
ARM: zynq: Add support for the Avnet Zedboard
arch/arm/Kconfig | 5 +
arch/arm/Makefile | 2 +
arch/arm/boards/avnet-zedboard/Makefile | 1 +
arch/arm/boards/avnet-zedboard/board.c | 38 ++
arch/arm/boards/avnet-zedboard/config.h | 4 +
.../boards/avnet-zedboard/env/init/config-board | 7 +
arch/arm/boards/avnet-zedboard/flash_header.c | 76 ++++
arch/arm/boards/avnet-zedboard/lowlevel.c | 252 +++++++++++++
arch/arm/configs/zedboard_defconfig | 45 +++
arch/arm/mach-zynq/Kconfig | 39 ++
arch/arm/mach-zynq/Makefile | 1 +
arch/arm/mach-zynq/clk-zynq7000.c | 417 +++++++++++++++++++++
arch/arm/mach-zynq/devices.c | 14 +
arch/arm/mach-zynq/include/mach/barebox.lds.h | 9 +
arch/arm/mach-zynq/include/mach/clkdev.h | 6 +
arch/arm/mach-zynq/include/mach/debug_ll.h | 37 ++
arch/arm/mach-zynq/include/mach/devices.h | 13 +
.../arm/mach-zynq/include/mach/zynq-flash-header.h | 40 ++
arch/arm/mach-zynq/include/mach/zynq7000-regs.h | 132 +++++++
arch/arm/mach-zynq/zynq.c | 56 +++
drivers/serial/Kconfig | 4 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_cadence.c | 307 +++++++++++++++
include/asm-generic/barebox.lds.h | 3 +-
scripts/Makefile | 1 +
scripts/zynq_checksum.c | 72 ++++
26 files changed, 1581 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
create mode 100644 arch/arm/boards/avnet-zedboard/board.c
create mode 100644 arch/arm/boards/avnet-zedboard/config.h
create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
create mode 100644 arch/arm/configs/zedboard_defconfig
create mode 100644 arch/arm/mach-zynq/Kconfig
create mode 100644 arch/arm/mach-zynq/Makefile
create mode 100644 arch/arm/mach-zynq/clk-zynq7000.c
create mode 100644 arch/arm/mach-zynq/devices.c
create mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h
create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h
create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h
create mode 100644 arch/arm/mach-zynq/include/mach/devices.h
create mode 100644 arch/arm/mach-zynq/include/mach/zynq-flash-header.h
create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-regs.h
create mode 100644 arch/arm/mach-zynq/zynq.c
create mode 100644 drivers/serial/serial_cadence.c
create mode 100644 scripts/zynq_checksum.c
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 1/5] serial: Add driver for Cadence UART
2013-03-19 9:21 [PATCH v2 0/5] ARM: add support for Zynq Steffen Trumtrar
@ 2013-03-19 9:21 ` Steffen Trumtrar
2013-03-19 15:22 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-19 9:21 ` [PATCH v2 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
` (4 subsequent siblings)
5 siblings, 1 reply; 21+ messages in thread
From: Steffen Trumtrar @ 2013-03-19 9:21 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
Support for Cadence UART core.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
drivers/serial/Kconfig | 4 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_cadence.c | 307 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 312 insertions(+)
create mode 100644 drivers/serial/serial_cadence.c
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index f61d670..a51510e 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -113,4 +113,8 @@ config DRIVER_SERIAL_OMAP4_USBBOOT
help
Enable this to get console support over the usb bus used to boot an OMAP4
+config DRIVER_SERIAL_CADENCE
+ default n
+ bool "Cadence UART driver"
+
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 893e282..963a7df 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_DRIVER_SERIAL_ALTERA) += serial_altera.o
obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG) += serial_altera_jtag.o
obj-$(CONFIG_DRIVER_SERIAL_PXA) += serial_pxa.o
obj-$(CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT) += serial_omap4_usbboot.o
+obj-$(CONFIG_DRIVER_SERIAL_CADENCE) += serial_cadence.o
diff --git a/drivers/serial/serial_cadence.c b/drivers/serial/serial_cadence.c
new file mode 100644
index 0000000..c29c391
--- /dev/null
+++ b/drivers/serial/serial_cadence.c
@@ -0,0 +1,307 @@
+/*
+ * (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <malloc.h>
+#include <notifier.h>
+#include <io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#define CADENCE_UART_CONTROL 0x00
+#define CADENCE_UART_MODE 0x04
+#define CADENCE_UART_BAUD_GEN 0x18
+#define CADENCE_UART_CHANNEL_STS 0x2C
+#define CADENCE_UART_RXTXFIFO 0x30
+#define CADENCE_UART_BAUD_DIV 0x34
+
+#define CADENCE_CTRL_RXRES (1 << 0)
+#define CADENCE_CTRL_TXRES (1 << 1)
+#define CADENCE_CTRL_RXEN (1 << 2)
+#define CADENCE_CTRL_RXDIS (1 << 3)
+#define CADENCE_CTRL_TXEN (1 << 4)
+#define CADENCE_CTRL_TXDIS (1 << 5)
+#define CADENCE_CTRL_RSTTO (1 << 6)
+#define CADENCE_CTRL_STTBRK (1 << 7)
+#define CADENCE_CTRL_STPBRK (1 << 8)
+
+#define CADENCE_MODE_CLK_REF (0 << 0)
+#define CADENCE_MODE_CLK_REF_DIV (1 << 0)
+#define CADENCE_MODE_CHRL_6 (3 << 1)
+#define CADENCE_MODE_CHRL_7 (2 << 1)
+#define CADENCE_MODE_CHRL_8 (0 << 1)
+#define CADENCE_MODE_PAR_EVEN (0 << 3)
+#define CADENCE_MODE_PAR_ODD (1 << 3)
+#define CADENCE_MODE_PAR_SPACE (2 << 3)
+#define CADENCE_MODE_PAR_MARK (3 << 3)
+#define CADENCE_MODE_PAR_NONE (4 << 3)
+
+#define CADENCE_STS_REMPTY (1 << 1)
+#define CADENCE_STS_RFUL (1 << 2)
+#define CADENCE_STS_TEMPTY (1 << 3)
+#define CADENCE_STS_TFUL (1 << 4)
+
+/*
+ * create default values for different platforms
+ */
+struct cadence_serial_devtype_data {
+ u32 ctrl;
+ u32 mode;
+};
+
+static struct cadence_serial_devtype_data cadence_r1p08_data = {
+ .ctrl = CADENCE_CTRL_RXEN | CADENCE_CTRL_TXEN,
+ .mode = CADENCE_MODE_CLK_REF | CADENCE_MODE_CHRL_8 | CADENCE_MODE_PAR_NONE,
+};
+
+struct cadence_serial_priv {
+ struct console_device cdev;
+ int baudrate;
+ struct notifier_block notify;
+ void __iomem *regs;
+ struct clk *clk;
+ struct cadence_serial_devtype_data *devtype;
+};
+
+static int cadence_serial_reset(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ /* Soft-Reset Tx/Rx paths */
+ writel(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES, priv->regs +
+ CADENCE_UART_CONTROL);
+
+ while (readl(priv->regs + CADENCE_UART_CONTROL) &
+ (CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES))
+ ;
+
+ return 0;
+}
+
+static int cadence_serial_setbaudrate(struct console_device *cdev, int baudrate)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+ unsigned int gen, div;
+ int calc_rate;
+ unsigned long clk;
+ int error;
+ int val;
+
+ clk = clk_get_rate(priv->clk);
+ priv->baudrate = baudrate;
+
+ /* disable transmitter and receiver */
+ val = readl(priv->regs + CADENCE_UART_CONTROL);
+ val &= ~CADENCE_CTRL_TXEN & ~CADENCE_CTRL_RXEN;
+ writel(val, priv->regs + CADENCE_UART_CONTROL);
+
+ /*
+ * clk
+ * rate = -----------
+ * gen*(div+1)
+ */
+
+ for (div = 4; div < 256; div++) {
+ gen = clk / (baudrate * (div + 1));
+
+ if (gen < 1 || gen > 65535)
+ continue;
+
+ calc_rate = clk / (gen * (div + 1));
+ error = baudrate - calc_rate;
+ if (error < 0)
+ error *= -1;
+ if (((error * 100) / baudrate) < 3)
+ break;
+ }
+
+ writel(gen, priv->regs + CADENCE_UART_BAUD_GEN);
+ writel(div, priv->regs + CADENCE_UART_BAUD_DIV);
+
+ /* Soft-Reset Tx/Rx paths */
+ writel(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES, priv->regs +
+ CADENCE_UART_CONTROL);
+
+ while (readl(priv->regs + CADENCE_UART_CONTROL) &
+ (CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES))
+ ;
+
+ /* Enable UART */
+ writel(priv->devtype->ctrl, priv->regs + CADENCE_UART_CONTROL);
+
+ return 0;
+}
+
+static int cadence_serial_init_port(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ cadence_serial_reset(cdev);
+
+ /* Enable UART */
+ writel(priv->devtype->ctrl, priv->regs + CADENCE_UART_CONTROL);
+ writel(priv->devtype->mode, priv->regs + CADENCE_UART_MODE);
+
+ return 0;
+}
+
+static void cadence_serial_putc(struct console_device *cdev, char c)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ while ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
+ CADENCE_STS_TFUL) != 0)
+ ;
+
+ writel(c, priv->regs + CADENCE_UART_RXTXFIFO);
+}
+
+static int cadence_serial_tstc(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ return ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
+ CADENCE_STS_REMPTY) == 0);
+}
+
+static int cadence_serial_getc(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ while (!cadence_serial_tstc(cdev))
+ ;
+
+ return readl(priv->regs + CADENCE_UART_RXTXFIFO);
+}
+
+static void cadence_serial_flush(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ while ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
+ CADENCE_STS_TEMPTY) != 0)
+ ;
+}
+
+static int cadence_clocksource_clock_change(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct cadence_serial_priv *priv = container_of(nb,
+ struct cadence_serial_priv, notify);
+
+ cadence_serial_setbaudrate(&priv->cdev, priv->baudrate);
+
+ return 0;
+}
+
+static int cadence_serial_probe(struct device_d *dev)
+{
+ struct console_device *cdev;
+ struct cadence_serial_priv *priv;
+ struct cadence_serial_devtype_data *devtype;
+ int ret;
+
+ ret = dev_get_drvdata(dev, (unsigned long *)&devtype);
+ if (ret)
+ return ret;
+
+ priv = xzalloc(sizeof(*priv));
+ priv->devtype = devtype;
+ cdev = &priv->cdev;
+ dev->priv = priv;
+
+ priv->clk = clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ ret = -ENODEV;
+ goto err_free;
+ }
+
+ if (devtype->mode & CADENCE_MODE_CLK_REF_DIV)
+ clk_set_rate(priv->clk, clk_get_rate(priv->clk) / 8);
+
+ priv->regs = dev_request_mem_region(dev, 0);
+ if (!priv->regs) {
+ ret = -EBUSY;
+ goto err_free;
+ }
+
+ cdev->dev = dev;
+ cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
+ cdev->tstc = cadence_serial_tstc;
+ cdev->putc = cadence_serial_putc;
+ cdev->getc = cadence_serial_getc;
+ cdev->flush = cadence_serial_flush;
+ cdev->setbrg = cadence_serial_setbaudrate;
+
+ cadence_serial_init_port(cdev);
+
+ console_register(cdev);
+ priv->notify.notifier_call = cadence_clocksource_clock_change;
+ clock_register_client(&priv->notify);
+
+ return 0;
+
+err_free:
+ free(priv);
+ return ret;
+}
+
+static void cadence_serial_remove(struct device_d *dev)
+{
+ struct cadence_serial_priv *priv = dev->priv;
+
+ console_unregister(&priv->cdev);
+ free(priv);
+}
+
+static __maybe_unused struct of_device_id cadence_serial_dt_ids[] = {
+ {
+ .compatible = "xlnx,xuartps",
+ .data = (unsigned long)&cadence_r1p08_data,
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct platform_device_id cadence_serial_ids[] = {
+ {
+ .name = "cadence-uart",
+ .driver_data = (unsigned long)&cadence_r1p08_data,
+ }, {
+ /* sentinel */
+ },
+};
+
+static struct driver_d cadence_serial_driver = {
+ .name = "cadence_serial",
+ .probe = cadence_serial_probe,
+ .remove = cadence_serial_remove,
+ .of_compatible = DRV_OF_COMPAT(cadence_serial_dt_ids),
+ .id_table = cadence_serial_ids,
+};
+
+static int cadence_serial_init(void)
+{
+ return platform_driver_register(&cadence_serial_driver);
+}
+console_initcall(cadence_serial_init);
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 2/5] ARM: zynq: Add new architecture zynq
2013-03-19 9:21 [PATCH v2 0/5] ARM: add support for Zynq Steffen Trumtrar
2013-03-19 9:21 ` [PATCH v2 1/5] serial: Add driver for Cadence UART Steffen Trumtrar
@ 2013-03-19 9:21 ` Steffen Trumtrar
2013-03-19 13:05 ` Josh Cartwright
` (2 more replies)
2013-03-19 9:21 ` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
` (3 subsequent siblings)
5 siblings, 3 replies; 21+ messages in thread
From: Steffen Trumtrar @ 2013-03-19 9:21 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
Add basic support for the Xilinx Zynq-7000 EPP architecture.
The Zynq-7000 is an embedded processing platform that combines a Cortex A9
dualcore MPSoC with an Artix-7 FPGA.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
arch/arm/Kconfig | 5 +
arch/arm/Makefile | 2 +
arch/arm/mach-zynq/Kconfig | 39 ++++++
arch/arm/mach-zynq/Makefile | 1 +
arch/arm/mach-zynq/devices.c | 14 +++
arch/arm/mach-zynq/include/mach/barebox.lds.h | 9 ++
arch/arm/mach-zynq/include/mach/debug_ll.h | 37 ++++++
arch/arm/mach-zynq/include/mach/devices.h | 13 ++
| 40 +++++++
arch/arm/mach-zynq/include/mach/zynq7000-regs.h | 132 +++++++++++++++++++++
arch/arm/mach-zynq/zynq.c | 56 +++++++++
include/asm-generic/barebox.lds.h | 3 +-
12 files changed, 350 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-zynq/Kconfig
create mode 100644 arch/arm/mach-zynq/Makefile
create mode 100644 arch/arm/mach-zynq/devices.c
create mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h
create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h
create mode 100644 arch/arm/mach-zynq/include/mach/devices.h
create mode 100644 arch/arm/mach-zynq/include/mach/zynq-flash-header.h
create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-regs.h
create mode 100644 arch/arm/mach-zynq/zynq.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 28332ec..8431fa8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -110,6 +110,10 @@ config ARCH_TEGRA
select CPU_ARM926T
select HAS_DEBUG_LL
+config ARCH_ZYNQ
+ bool "Xilinx Zynq-based boards"
+ select HAS_DEBUG_LL
+
endchoice
source arch/arm/cpu/Kconfig
@@ -126,6 +130,7 @@ source arch/arm/mach-pxa/Kconfig
source arch/arm/mach-samsung/Kconfig
source arch/arm/mach-versatile/Kconfig
source arch/arm/mach-tegra/Kconfig
+source arch/arm/mach-zynq/Kconfig
config ARM_ASM_UNIFIED
bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index fcb2969..ceb45dc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -64,6 +64,7 @@ machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_SAMSUNG) := samsung
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_TEGRA) := tegra
+machine-$(CONFIG_ARCH_ZYNQ) := zynq
# Board directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
@@ -157,6 +158,7 @@ board-$(CONFIG_MACH_SABRELITE) := freescale-mx6-sabrelite
board-$(CONFIG_MACH_TX53) := karo-tx53
board-$(CONFIG_MACH_GUF_VINCELL) := guf-vincell
board-$(CONFIG_MACH_EFIKA_MX_SMARTBOOK) := efika-mx-smartbook
+board-$(CONFIG_MACH_ZEDBOARD) := avnet-zedboard
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
new file mode 100644
index 0000000..3965ad4
--- /dev/null
+++ b/arch/arm/mach-zynq/Kconfig
@@ -0,0 +1,39 @@
+if ARCH_ZYNQ
+
+config ARCH_TEXT_BASE
+ hex
+ default 0x1ff00000 if MACH_ZEDBOARD
+
+config ZYNQ_DEBUG_LL_UART_BASE
+ hex
+ default 0xe0001000 if MACH_ZEDBOARD
+
+config BOARDINFO
+ default "ZedBoard" if MACH_ZEDBOARD
+
+choice
+ prompt "Xilinx Zynq type board"
+
+config ARCH_ZYNQ7000
+ bool "Zynq-7000"
+ select CPU_V7
+ select DRIVER_SERIAL_CADENCE
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select ARM_SMP_TWD
+
+endchoice
+
+if ARCH_ZYNQ7000
+
+choice
+ prompt "Zynq-7000 Board Type"
+
+config MACH_ZEDBOARD
+ bool "Avnet Zynq-7000 ZedBoard"
+ select MACH_HAS_LOWLEVEL_INIT
+
+endchoice
+endif
+
+endif
diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile
new file mode 100644
index 0000000..459c957
--- /dev/null
+++ b/arch/arm/mach-zynq/Makefile
@@ -0,0 +1 @@
+obj-y += zynq.o devices.o clk-zynq7000.o
diff --git a/arch/arm/mach-zynq/devices.c b/arch/arm/mach-zynq/devices.c
new file mode 100644
index 0000000..2bb3c92
--- /dev/null
+++ b/arch/arm/mach-zynq/devices.c
@@ -0,0 +1,14 @@
+#include <common.h>
+#include <driver.h>
+#include <mach/devices.h>
+
+static inline struct device_d *zynq_add_device(char *name, int id, void *base, int size, void *pdata)
+{
+ return add_generic_device(name, id, NULL, (resource_size_t)base, size,
+ IORESOURCE_MEM, pdata);
+}
+
+struct device_d *zynq_add_uart(void *base, int id)
+{
+ return zynq_add_device("cadence-uart", id, base, 0x1000, NULL);
+}
diff --git a/arch/arm/mach-zynq/include/mach/barebox.lds.h b/arch/arm/mach-zynq/include/mach/barebox.lds.h
new file mode 100644
index 0000000..674a4ac
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/barebox.lds.h
@@ -0,0 +1,9 @@
+#define PRE_IMAGE \
+ .pre_image : { \
+ KEEP(*(.flash_header_start*)) \
+ . = 0x20; \
+ KEEP(*(.flash_header_0x0*)) \
+ . = 0xa0; \
+ KEEP(*(.ps7reg_entry_0x0A0)) \
+ . = 0x8c0; \
+ }
diff --git a/arch/arm/mach-zynq/include/mach/debug_ll.h b/arch/arm/mach-zynq/include/mach/debug_ll.h
new file mode 100644
index 0000000..478a9f0
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/debug_ll.h
@@ -0,0 +1,37 @@
+/*
+ * based on mach-imx/include/mach/debug_ll.h
+ */
+
+#ifndef __MACH_DEBUG_LL_H__
+#define __MACH_DEBUG_LL_H__
+
+#include <io.h>
+#include <mach/zynq7000-regs.h>
+
+#ifndef CONFIG_ZYNQ_DEBUG_LL_UART_BASE
+#warning define ZYNQ_DEBUG_LL_UART_BASE properly for debug_ll
+#define ZYNQ_DEBUG_LL_UART_BASE ZYNQ_UART1_BASE_ADDR
+#else
+#define ZYNQ_DEBUG_LL_UART_BASE CONFIG_ZYNQ_DEBUG_LL_UART_BASE
+#endif
+
+#define ZYNQ_UART_RXTXFIFO 0x30
+#define ZYNQ_UART_CHANNEL_STS 0x2C
+
+#define ZYNQ_UART_STS_TFUL (1 << 4)
+#define ZYNQ_UART_TXDIS (1 << 5)
+
+static inline void PUTC_LL(int c)
+{
+ void __iomem *base = (void *)ZYNQ_DEBUG_LL_UART_BASE;
+
+ if (readl(base) & ZYNQ_UART_TXDIS)
+ return;
+
+ while ((readl(base + ZYNQ_UART_CHANNEL_STS) & ZYNQ_UART_STS_TFUL) != 0)
+ ;
+
+ writel(c, base + ZYNQ_UART_RXTXFIFO);
+}
+
+#endif
diff --git a/arch/arm/mach-zynq/include/mach/devices.h b/arch/arm/mach-zynq/include/mach/devices.h
new file mode 100644
index 0000000..7085aeb
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/devices.h
@@ -0,0 +1,13 @@
+#include <mach/zynq7000-regs.h>
+
+struct device_d *zynq_add_uart(void *base, int id);
+
+static inline struct device_d *zynq_add_uart0(void)
+{
+ return zynq_add_uart((void *)ZYNQ_UART0_BASE_ADDR, 0);
+}
+
+static inline struct device_d *zynq_add_uart1(void)
+{
+ return zynq_add_uart((void *)ZYNQ_UART1_BASE_ADDR, 1);
+}
--git a/arch/arm/mach-zynq/include/mach/zynq-flash-header.h b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
new file mode 100644
index 0000000..a0251cb
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
@@ -0,0 +1,40 @@
+#ifndef __MACH_FLASH_HEADER_H
+#define __MACH_FLASH_HEADER_H
+
+#include <asm-generic/sections.h>
+
+#define __flash_header_start __section(.flash_header_start)
+
+#define __flash_header_section __section(.flash_header_0x0)
+#define __ps7reg_entry_section __section(.ps7reg_entry_0x0A0)
+#define __image_len_section __section(.image_len_0x08c0)
+#define FLASH_HEADER_OFFSET 0x0
+#define IMAGE_OFFSET 0x8c0
+
+#define DEST_BASE 0x8c0
+#define FLASH_HEADER_BASE (DEST_BASE + FLASH_HEADER_OFFSET)
+
+struct zynq_reg_entry {
+ __le32 addr;
+ __le32 val;
+};
+
+#define WIDTH_DETECTION_MAGIC 0xAA995566
+#define IMAGE_IDENTIFICATION 0x584C4E58 /* "XLNX" */
+
+struct zynq_flash_header {
+ uint32_t width_det;
+ uint32_t image_id;
+ uint32_t enc_stat;
+ uint32_t user;
+ uint32_t flash_offset;
+ uint32_t length;
+ uint32_t res0;
+ uint32_t start_of_exec;
+ uint32_t total_len;
+ uint32_t res1;
+ uint32_t checksum;
+ uint32_t res2;
+};
+
+#endif /* __MACH_FLASH_HEADER_H */
diff --git a/arch/arm/mach-zynq/include/mach/zynq7000-regs.h b/arch/arm/mach-zynq/include/mach/zynq7000-regs.h
new file mode 100644
index 0000000..f5ccbb0
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/zynq7000-regs.h
@@ -0,0 +1,132 @@
+/*
+ * (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define ZYNQ_UART0_BASE_ADDR 0xE0000000
+#define ZYNQ_UART1_BASE_ADDR 0xE0001000
+#define ZYNQ_I2C0_BASE_ADDR 0xE0004000
+#define ZYNQ_I2C1_BASE_ADDR 0xE0005000
+#define ZYNQ_SPI0_BASE_ADDR 0xE0006000
+#define ZYNQ_SPI1_BASE_ADDR 0xE0007000
+#define ZYNQ_CAN0_BASE_ADDR 0xE0008000
+#define ZYNQ_CAN1_BASE_ADDR 0xE0009000
+#define ZYNQ_GPIO_BASE_ADDR 0xE000A000
+
+#define ZYNQ_SLCR_BASE 0xF8000000
+#define ZYNQ_SLCR_SCL (ZYNQ_SLCR_BASE + 0x000)
+#define ZYNQ_SLCR_LOCK (ZYNQ_SLCR_BASE + 0x004)
+#define ZYNQ_SLCR_UNLOCK (ZYNQ_SLCR_BASE + 0x008)
+#define ZYNQ_SLCR_LOCKSTA (ZYNQ_SLCR_BASE + 0x00C)
+#define ZYNQ_CLOCK_CTRL_BASE (ZYNQ_SLCR_BASE + 0x100)
+#define ZYNQ_ARM_PLL_CTRL 0x000
+#define ZYNQ_DDR_PLL_CTRL 0x004
+#define ZYNQ_IO_PLL_CTRL 0x008
+#define ZYNQ_PLL_STATUS 0x00C
+#define ZYNQ_ARM_PLL_CFG 0x010
+#define ZYNQ_DDR_PLL_CFG 0x014
+#define ZYNQ_IO_PLL_CFG 0x018
+#define ZYNQ_ARM_CLK_CTRL 0x020
+#define ZYNQ_DDR_CLK_CTRL 0x024
+#define ZYNQ_DCI_CLK_CTRL 0x028
+#define ZYNQ_APER_CLK_CTRL 0x02C
+#define ZYNQ_USB0_CLK_CTRL 0x030
+#define ZYNQ_USB1_CLK_CTRL 0x034
+#define ZYNQ_GEM0_RCLK_CTRL 0x038
+#define ZYNQ_GEM1_RCLK_CTRL 0x03C
+#define ZYNQ_GEM0_CLK_CTRL 0x040
+#define ZYNQ_GEM1_CLK_CTRL 0x044
+#define ZYNQ_SMC_CLK_CTRL 0x048
+#define ZYNQ_LQSPI_CLK_CTRL 0x04C
+#define ZYNQ_SDIO_CLK_CTRL 0x050
+#define ZYNQ_UART_CLK_CTRL 0x054
+#define ZYNQ_SPI_CLK_CTRL 0x058
+#define ZYNQ_CAN_CLK_CTRL 0x05C
+#define ZYNQ_CAN_MIOCLK_CTRL 0x060
+#define ZYNQ_DBG_CLK_CTRL 0x064
+#define ZYNQ_PCAP_CLK_CTRL 0x068
+#define ZYNQ_TOPSW_CLK_CTRL 0x06C
+#define ZYNQ_FPGA0_CLK_CTRL 0x070
+#define ZYNQ_FPGA1_CLK_CTRL 0x080
+#define ZYNQ_FPGA2_CLK_CTRL 0x090
+#define ZYNQ_FPGA3_CLK_CTRL 0x0A0
+#define ZYNQ_CLK_621_TRUE 0x0C4
+#define ZYNQ_RST_CTRL_BASE (ZYNQ_SLCR_BASE + 0x200)
+#define ZYNQ_PSS_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x000)
+#define ZYNQ_DDR_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x004)
+#define ZYNQ_TOPSW_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x008)
+#define ZYNQ_DMAC_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x00C)
+#define ZYNQ_USB_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x010)
+#define ZYNQ_GEM_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x014)
+#define ZYNQ_SDIO_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x018)
+#define ZYNQ_SPI_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x01C)
+#define ZYNQ_CAN_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x020)
+#define ZYNQ_I2C_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x024)
+#define ZYNQ_UART_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x028)
+#define ZYNQ_GPIO_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x02C)
+#define ZYNQ_LQSPI_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x030)
+#define ZYNQ_SMC_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x034)
+#define ZYNQ_OCM_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x038)
+#define ZYNQ_DEVCI_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x03C)
+#define ZYNQ_FPGA_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x040)
+#define ZYNQ_A9_CPU_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x044)
+#define ZYNQ_RS_AWDT_CTRL (ZYNQ_RST_CTRL_BASE + 0x04C)
+#define ZYNQ_REBOOT_STATUS (ZYNQ_SLCR_BASE + 0x258)
+#define ZYNQ_BOOT_MODE (ZYNQ_SLCR_BASE + 0x25C)
+#define ZYNQ_APU_CTRL (ZYNQ_SLCR_BASE + 0x300)
+#define ZYNQ_WDT_CLK_SEL (ZYNQ_SLCR_BASE + 0x304)
+#define ZYNQ_PSS_IDCODE (ZYNQ_SLCR_BASE + 0x530)
+#define ZYNQ_DDR_URGENT (ZYNQ_SLCR_BASE + 0x600)
+#define ZYNQ_DDR_CAL_START (ZYNQ_SLCR_BASE + 0x60C)
+#define ZYNQ_DDR_REF_START (ZYNQ_SLCR_BASE + 0x614)
+#define ZYNQ_DDR_CMD_STA (ZYNQ_SLCR_BASE + 0x618)
+#define ZYNQ_DDR_URGENT_SEL (ZYNQ_SLCR_BASE + 0x61C)
+#define ZYNQ_DDR_DFI_STATUS (ZYNQ_SLCR_BASE + 0x620)
+#define ZYNQ_MIO_BASE (ZYNQ_SLCR_BASE + 0x700)
+#define ZYNQ_MIO_LOOPBACK (ZYNQ_MIO_BASE + 0x104)
+#define ZYNQ_MIO_MST_TRI0 (ZYNQ_MIO_BASE + 0x10C)
+#define ZYNQ_MIO_MST_TRI1 (ZYNQ_MIO_BASE + 0x110)
+#define ZYNQ_SD0_WP_SEL (ZYNQ_SLCR_BASE + 0x830)
+#define ZYNQ_SD1_WP_SEL (ZYNQ_SLCR_BASE + 0x834)
+#define ZYNQ_LVL_SHIFTR_EN (ZYNQ_SLCR_BASE + 0x900)
+#define ZYNQ_OCM_CFG (ZYNQ_SLCR_BASE + 0x910)
+#define ZYNQ_GPIOB_BASE (ZYNQ_SLCR_BASE + 0xB00)
+#define ZYNQ_GPIOB_CTRL (ZYNQ_GPIOB_BASE + 0x000)
+#define ZYNQ_GPIOB_CFG_CMOS18 (ZYNQ_GPIOB_BASE + 0x004)
+#define ZYNQ_GPIOB_CFG_CMOS25 (ZYNQ_GPIOB_BASE + 0x008)
+#define ZYNQ_GPIOB_CFG_CMOS33 (ZYNQ_GPIOB_BASE + 0x00C)
+#define ZYNQ_GPIOB_CFG_LVTTL (ZYNQ_GPIOB_BASE + 0x010)
+#define ZYNQ_GPIOB_CFG_HSTL (ZYNQ_GPIOB_BASE + 0x014)
+#define ZYNQ_GPIOB_DRV_BIAS_CTRL (ZYNQ_GPIOB_BASE + 0x018)
+#define ZYNQ_DDRIOB_BASE (ZYNQ_SLCR_BASE + 0xB40)
+#define ZYNQ_DDRIOB_ADDR0 (ZYNQ_DDRIOB_BASE + 0x000)
+#define ZYNQ_DDRIOB_ADDR1 (ZYNQ_DDRIOB_BASE + 0x004)
+#define ZYNQ_DDRIOB_DATA0 (ZYNQ_DDRIOB_BASE + 0x008)
+#define ZYNQ_DDRIOB_DATA1 (ZYNQ_DDRIOB_BASE + 0x00C)
+#define ZYNQ_DDRIOB_DIFF0 (ZYNQ_DDRIOB_BASE + 0x010)
+#define ZYNQ_DDRIOB_DIFF1 (ZYNQ_DDRIOB_BASE + 0x014)
+#define ZYNQ_DDRIOB_CLOCK (ZYNQ_DDRIOB_BASE + 0x018)
+#define ZYNQ_DDRIOB_DRIVE_SLEW_ADDR (ZYNQ_DDRIOB_BASE + 0x01C)
+#define ZYNQ_DDRIOB_DRIVE_SLEW_DATA (ZYNQ_DDRIOB_BASE + 0x020)
+#define ZYNQ_DDRIOB_DRIVE_SLEW_DIFF (ZYNQ_DDRIOB_BASE + 0x024)
+#define ZYNQ_DDRIOB_DRIVE_SLEW_CLOCK (ZYNQ_DDRIOB_BASE + 0x028)
+#define ZYNQ_DDRIOB_DDR_CTRL (ZYNQ_DDRIOB_BASE + 0x02C)
+#define ZYNQ_DDRIOB_DCI_CTRL (ZYNQ_DDRIOB_BASE + 0x030)
+#define ZYNQ_DDRIOB_DCI_STATUS (ZYNQ_DDRIOB_BASE + 0x034)
+
+#define ZYNQ_TTC0_BASE_ADDR 0xF8001000
+#define ZYNQ_TTC1_BASE_ADDR 0xF8002000
+
+#define ZYNQ_DDRC_BASE 0xF8006000
+
+#define CORTEXA9_SCU_TIMER_BASE_ADDR 0xF8F00600
diff --git a/arch/arm/mach-zynq/zynq.c b/arch/arm/mach-zynq/zynq.c
new file mode 100644
index 0000000..bd29e13
--- /dev/null
+++ b/arch/arm/mach-zynq/zynq.c
@@ -0,0 +1,56 @@
+/*
+ * (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/system.h>
+#include <asm-generic/io.h>
+#include <common.h>
+#include <init.h>
+#include <mach/zynq7000-regs.h>
+
+static int zynq_init(void)
+{
+ u32 val;
+
+ dsb();
+ isb();
+ writel(0xDF0D, ZYNQ_SLCR_UNLOCK);
+ /* remap ocm high */
+ writel(0x0000000F, 0xf8000910);
+ /* mpcore.filtering_start_address */
+ writel(0x00000000, 0xf8f00040);
+ /* mpcore.filtering_end_address */
+ writel(0xffe00000, 0xf8f00044);
+ val = readl(0xf8f00000);
+ val |= 0x2;
+ writel(val, 0xf8f00000);
+ dmb();
+
+ add_generic_device("zynq-clock", 0, NULL, ZYNQ_SLCR_BASE, 0x4000, IORESOURCE_MEM, NULL);
+ add_generic_device("smp_twd", 0, NULL, CORTEXA9_SCU_TIMER_BASE_ADDR,
+ 0x4000, IORESOURCE_MEM, NULL);
+ return 0;
+}
+postcore_initcall(zynq_init);
+
+void __noreturn reset_cpu(unsigned long addr)
+{
+ /* write unlock key to slcr */
+ writel(0xDF0D, ZYNQ_SLCR_UNLOCK);
+ /* reset */
+ writel(0x1, ZYNQ_PSS_RST_CTRL);
+
+ while (1)
+ ;
+}
diff --git a/include/asm-generic/barebox.lds.h b/include/asm-generic/barebox.lds.h
index b2bd19e..0b98c96 100644
--- a/include/asm-generic/barebox.lds.h
+++ b/include/asm-generic/barebox.lds.h
@@ -5,7 +5,8 @@
defined CONFIG_ARCH_IMX53 || \
defined CONFIG_ARCH_IMX6 || \
defined CONFIG_X86 || \
- defined CONFIG_ARCH_EP93XX
+ defined CONFIG_ARCH_EP93XX || \
+ defined CONFIG_ARCH_ZYNQ
#include <mach/barebox.lds.h>
#endif
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000
2013-03-19 9:21 [PATCH v2 0/5] ARM: add support for Zynq Steffen Trumtrar
2013-03-19 9:21 ` [PATCH v2 1/5] serial: Add driver for Cadence UART Steffen Trumtrar
2013-03-19 9:21 ` [PATCH v2 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
@ 2013-03-19 9:21 ` Steffen Trumtrar
2013-03-19 13:29 ` Josh Cartwright
2013-03-19 9:21 ` [PATCH v2 4/5] ARM: zynq: add zynq fsbl checksum script Steffen Trumtrar
` (2 subsequent siblings)
5 siblings, 1 reply; 21+ messages in thread
From: Steffen Trumtrar @ 2013-03-19 9:21 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
This adds support for the clocktree on zynq7000 SoCs.
The patch is based on clocks.c from the larger patch
ARM: zynq: add suppport for Zynq 7000 SoC
by Josh Cartwright.
The driver in that patch is converted to a platform_driver and code to
enable plls was added.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
arch/arm/mach-zynq/clk-zynq7000.c | 417 +++++++++++++++++++++++++++++++
arch/arm/mach-zynq/include/mach/clkdev.h | 6 +
2 files changed, 423 insertions(+)
create mode 100644 arch/arm/mach-zynq/clk-zynq7000.c
create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h
diff --git a/arch/arm/mach-zynq/clk-zynq7000.c b/arch/arm/mach-zynq/clk-zynq7000.c
new file mode 100644
index 0000000..1e03514
--- /dev/null
+++ b/arch/arm/mach-zynq/clk-zynq7000.c
@@ -0,0 +1,417 @@
+/*
+ * Copyright (c) 2013 Josh Cartwright <joshc@eso.teric.us>
+ * Copyright (c) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * Based on drivers/clk-zynq.c from Linux.
+ *
+ * Copyright (c) 2012 National Instruments
+ *
+ * Josh Cartwright <josh.cartwright@ni.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <mach/zynq7000-regs.h>
+#include <malloc.h>
+
+enum zynq_clks {
+ dummy, ps_clk, arm_pll, ddr_pll, io_pll, uart_clk, uart0, uart1,
+ cpu_clk, cpu_6x4x, cpu_3x2x, cpu_2x, cpu_1x, clks_max
+};
+
+enum zynq_pll_type {
+ ZYNQ_PLL_ARM,
+ ZYNQ_PLL_DDR,
+ ZYNQ_PLL_IO,
+};
+
+#define PLL_STATUS_ARM_PLL_LOCK (1 << 0)
+#define PLL_STATUS_DDR_PLL_LOCK (1 << 1)
+#define PLL_STATUS_IO_PLL_LOCK (1 << 2)
+#define PLL_STATUS_ARM_PLL_STABLE (1 << 0)
+#define PLL_STATUS_DDR_PLL_STABLE (1 << 1)
+#define PLL_STATUS_IO_PLL_STABLE (1 << 2)
+#define PLL_CTRL_BYPASS_FORCE (1 << 4)
+
+static struct clk *clks[clks_max];
+
+struct zynq_pll_clk {
+ struct clk clk;
+ u32 pll_lock;
+ void __iomem *pll_ctrl;
+};
+
+#define to_zynq_pll_clk(c) container_of(c, struct zynq_pll_clk, clk)
+
+#define PLL_CTRL_FDIV(x) (((x) >> 12) & 0x7F)
+
+static unsigned long zynq_pll_recalc_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ struct zynq_pll_clk *pll = to_zynq_pll_clk(clk);
+ return parent_rate * PLL_CTRL_FDIV(readl(pll->pll_ctrl));
+}
+
+static int zynq_pll_enable(struct clk *clk)
+{
+ struct zynq_pll_clk *pll = to_zynq_pll_clk(clk);
+ u32 val;
+ int timeout = 10000;
+
+ val = readl(pll->pll_ctrl);
+ val &= ~PLL_CTRL_BYPASS_FORCE;
+ writel(val, pll->pll_ctrl);
+
+ while (timeout--) {
+ if (readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & pll->pll_lock)
+ break;
+ }
+
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static struct clk_ops zynq_pll_clk_ops = {
+ .recalc_rate = zynq_pll_recalc_rate,
+ .enable = zynq_pll_enable,
+};
+
+static inline struct clk *zynq_pll_clk(enum zynq_pll_type type,
+ const char *name,
+ void __iomem *pll_ctrl)
+{
+ static const char *pll_parent = "ps_clk";
+ struct zynq_pll_clk *pll;
+ int ret;
+
+ pll = xzalloc(sizeof(*pll));
+ pll->pll_ctrl = pll_ctrl;
+ pll->clk.ops = &zynq_pll_clk_ops;
+ pll->clk.name = name;
+ pll->clk.parent_names = &pll_parent;
+ pll->clk.num_parents = 1;
+
+ switch(type) {
+ case ZYNQ_PLL_ARM:
+ pll->pll_lock = PLL_STATUS_ARM_PLL_LOCK;
+ break;
+ case ZYNQ_PLL_DDR:
+ pll->pll_lock = PLL_STATUS_DDR_PLL_LOCK;
+ break;
+ case ZYNQ_PLL_IO:
+ pll->pll_lock = PLL_STATUS_IO_PLL_LOCK;
+ break;
+ }
+
+ ret = clk_register(&pll->clk);
+ if (ret) {
+ free(pll);
+ return ERR_PTR(ret);
+ }
+
+ return &pll->clk;
+}
+
+struct zynq_periph_clk {
+ struct clk clk;
+ void __iomem *clk_ctrl;
+};
+
+#define to_zynq_periph_clk(c) container_of(c, struct zynq_periph_clk, c)
+
+static const u8 periph_clk_parent_map[] = {
+ 0, 0, 1, 2
+};
+#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4])
+#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8)
+
+static unsigned long zynq_periph_recalc_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ struct zynq_periph_clk *periph = to_zynq_periph_clk(clk);
+ return parent_rate / PERIPH_CLK_CTRL_DIV(readl(periph->clk_ctrl));
+}
+
+static int zynq_periph_get_parent(struct clk *clk)
+{
+ struct zynq_periph_clk *periph = to_zynq_periph_clk(clk);
+ return PERIPH_CLK_CTRL_SRC(readl(periph->clk_ctrl));
+}
+
+static const struct clk_ops zynq_periph_clk_ops = {
+ .recalc_rate = zynq_periph_recalc_rate,
+ .get_parent = zynq_periph_get_parent,
+};
+
+static struct clk *zynq_periph_clk(const char *name, void __iomem *clk_ctrl)
+{
+ static const char *peripheral_parents[] = {
+ "io_pll",
+ "arm_pll",
+ "ddr_pll",
+ };
+ struct zynq_periph_clk *periph;
+ int ret;
+
+ periph = xzalloc(sizeof(*periph));
+
+ periph->clk_ctrl = clk_ctrl;
+ periph->clk.name = name;
+ periph->clk.ops = &zynq_periph_clk_ops;
+ periph->clk.parent_names = peripheral_parents;
+ periph->clk.num_parents = ARRAY_SIZE(peripheral_parents);
+
+ ret = clk_register(&periph->clk);
+ if (ret) {
+ free(periph);
+ return ERR_PTR(ret);
+ }
+
+ return &periph->clk;
+}
+
+/* CPU Clock domain is modelled as a mux with 4 children subclks, whose
+ * derivative rates depend on CLK_621_TRUE
+ */
+
+struct zynq_cpu_clk {
+ struct clk clk;
+ void __iomem *clk_ctrl;
+};
+
+#define to_zynq_cpu_clk(c) container_of(c, struct zynq_cpu_clk, c)
+
+static const u8 zynq_cpu_clk_parent_map[] = {
+ 1, 1, 2, 0
+};
+#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)])
+#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8)
+
+static unsigned long zynq_cpu_clk_recalc_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(clk);
+ return parent_rate / CPU_CLK_CTRL_DIV(readl(cpuclk->clk_ctrl));
+}
+
+static int zynq_cpu_clk_get_parent(struct clk *clk)
+{
+ struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(clk);
+ return CPU_CLK_SRCSEL(readl(cpuclk->clk_ctrl));
+}
+
+static const struct clk_ops zynq_cpu_clk_ops = {
+ .get_parent = zynq_cpu_clk_get_parent,
+ .recalc_rate = zynq_cpu_clk_recalc_rate,
+};
+
+static struct clk *zynq_cpu_clk(const char *name, void __iomem *clk_ctrl)
+{
+ static const char *cpu_parents[] = {
+ "io_pll",
+ "arm_pll",
+ "ddr_pll",
+ };
+ struct zynq_cpu_clk *cpu;
+ int ret;
+
+ cpu = xzalloc(sizeof(*cpu));
+
+ cpu->clk_ctrl = clk_ctrl;
+ cpu->clk.ops = &zynq_cpu_clk_ops;
+ cpu->clk.name = name;
+ cpu->clk.parent_names = cpu_parents;
+ cpu->clk.num_parents = ARRAY_SIZE(cpu_parents);
+
+ ret = clk_register(&cpu->clk);
+ if (ret) {
+ free(cpu);
+ return ERR_PTR(ret);
+ }
+
+ return &cpu->clk;
+}
+
+enum zynq_cpu_subclk_which {
+ CPU_SUBCLK_6X4X,
+ CPU_SUBCLK_3X2X,
+ CPU_SUBCLK_2X,
+ CPU_SUBCLK_1X,
+};
+
+struct zynq_cpu_subclk {
+ struct clk clk;
+ void __iomem *clk_ctrl;
+ void __iomem *clk_621;
+ enum zynq_cpu_subclk_which which;
+};
+
+#define CLK_621_TRUE(x) ((x) & 1)
+
+#define to_zynq_cpu_subclk(c) container_of(c, struct zynq_cpu_subclk, c);
+
+static unsigned long zynq_cpu_subclk_recalc_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ unsigned long uninitialized_var(rate);
+ struct zynq_cpu_subclk *subclk;
+ bool is_621;
+
+ subclk = to_zynq_cpu_subclk(clk);
+ is_621 = CLK_621_TRUE(readl(subclk->clk_621));
+
+ switch (subclk->which) {
+ case CPU_SUBCLK_6X4X:
+ rate = parent_rate;
+ break;
+ case CPU_SUBCLK_3X2X:
+ rate = parent_rate / 2;
+ break;
+ case CPU_SUBCLK_2X:
+ rate = parent_rate / (is_621 ? 3 : 2);
+ break;
+ case CPU_SUBCLK_1X:
+ rate = parent_rate / (is_621 ? 6 : 4);
+ break;
+ };
+
+ return rate;
+}
+
+static int zynq_cpu_subclk_enable(struct clk *clk)
+{
+ struct zynq_cpu_subclk *subclk;
+ u32 tmp;
+
+ subclk = to_zynq_cpu_subclk(clk);
+
+ tmp = readl(subclk->clk_ctrl);
+ tmp |= 1 << (24 + subclk->which);
+ writel(tmp, subclk->clk_ctrl);
+
+ return 0;
+}
+
+static void zynq_cpu_subclk_disable(struct clk *clk)
+{
+ struct zynq_cpu_subclk *subclk;
+ u32 tmp;
+
+ subclk = to_zynq_cpu_subclk(clk);
+
+ tmp = readl(subclk->clk_ctrl);
+ tmp &= ~(1 << (24 + subclk->which));
+ writel(tmp, subclk->clk_ctrl);
+}
+
+static const struct clk_ops zynq_cpu_subclk_ops = {
+ .enable = zynq_cpu_subclk_enable,
+ .disable = zynq_cpu_subclk_disable,
+ .recalc_rate = zynq_cpu_subclk_recalc_rate,
+};
+
+static struct clk *zynq_cpu_subclk(const char *name,
+ enum zynq_cpu_subclk_which which,
+ void __iomem *clk_ctrl,
+ void __iomem *clk_621)
+{
+ static const char *subclk_parent = "cpu_clk";
+ struct zynq_cpu_subclk *subclk;
+ int ret;
+
+ subclk = xzalloc(sizeof(*subclk));
+
+ subclk->clk_ctrl = clk_ctrl;
+ subclk->clk_621 = clk_621;
+ subclk->which = which;
+ subclk->clk.name = name;
+ subclk->clk.ops = &zynq_cpu_subclk_ops;
+
+ subclk->clk.parent_names = &subclk_parent;
+ subclk->clk.num_parents = 1;
+
+ ret = clk_register(&subclk->clk);
+ if (ret) {
+ free(subclk);
+ return ERR_PTR(ret);
+ }
+
+ return &subclk->clk;
+}
+
+static int zynq_clock_probe(struct device_d *dev)
+{
+ void __iomem *slcr_base;
+ unsigned long ps_clk_rate = 33333330;
+
+ slcr_base = dev_request_mem_region(dev, 0);
+ if (!slcr_base)
+ return -EBUSY;
+
+ clks[ps_clk] = clk_fixed("ps_clk", ps_clk_rate);
+
+ clks[arm_pll] = zynq_pll_clk(ZYNQ_PLL_ARM, "arm_pll", slcr_base + 0x100);
+ clks[ddr_pll] = zynq_pll_clk(ZYNQ_PLL_DDR, "ddr_pll", slcr_base + 0x104);
+ clks[io_pll] = zynq_pll_clk(ZYNQ_PLL_IO, "io_pll", slcr_base + 0x108);
+
+ clks[uart_clk] = zynq_periph_clk("uart_clk", slcr_base + 0x154);
+
+ clks[uart0] = clk_gate("uart0", "uart_clk", slcr_base + 0x154, 0);
+ clks[uart1] = clk_gate("uart1", "uart_clk", slcr_base + 0x154, 1);
+
+ clks[cpu_clk] = zynq_cpu_clk("cpu_clk", slcr_base + 0x120);
+
+ clks[cpu_6x4x] = zynq_cpu_subclk("cpu_6x4x", CPU_SUBCLK_6X4X,
+ slcr_base + 0x120, slcr_base + 0x1C4);
+ clks[cpu_3x2x] = zynq_cpu_subclk("cpu_3x2x", CPU_SUBCLK_3X2X,
+ slcr_base + 0x120, slcr_base + 0x1C4);
+ clks[cpu_2x] = zynq_cpu_subclk("cpu_2x", CPU_SUBCLK_2X,
+ slcr_base + 0x120, slcr_base + 0x1C4);
+ clks[cpu_1x] = zynq_cpu_subclk("cpu_1x", CPU_SUBCLK_1X,
+ slcr_base + 0x120, slcr_base + 0x1C4);
+
+ clk_register_clkdev(clks[cpu_3x2x], NULL, "arm_smp_twd");
+ clk_register_clkdev(clks[uart0], NULL, "zynq_serial0");
+ clk_register_clkdev(clks[uart1], NULL, "zynq_serial1");
+
+ clkdev_add_physbase(clks[cpu_3x2x], CORTEXA9_SCU_TIMER_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[uart1], ZYNQ_UART1_BASE_ADDR, NULL);
+ return 0;
+}
+
+static __maybe_unused struct of_device_id zynq_clock_dt_ids[] = {
+ {
+ .compatible = "xlnx,zynq-clock",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d zynq_clock_driver = {
+ .probe = zynq_clock_probe,
+ .name = "zynq-clock",
+ .of_compatible = DRV_OF_COMPAT(zynq_clock_dt_ids),
+};
+
+static int zynq_clock_init(void)
+{
+ return platform_driver_register(&zynq_clock_driver);
+}
+postcore_initcall(zynq_clock_init);
diff --git a/arch/arm/mach-zynq/include/mach/clkdev.h b/arch/arm/mach-zynq/include/mach/clkdev.h
new file mode 100644
index 0000000..31f7035
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/clkdev.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+#endif
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 4/5] ARM: zynq: add zynq fsbl checksum script
2013-03-19 9:21 [PATCH v2 0/5] ARM: add support for Zynq Steffen Trumtrar
` (2 preceding siblings ...)
2013-03-19 9:21 ` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
@ 2013-03-19 9:21 ` Steffen Trumtrar
2013-03-19 9:22 ` [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard Steffen Trumtrar
2013-03-19 12:59 ` [PATCH v2 0/5] ARM: add support for Zynq Josh Cartwright
5 siblings, 0 replies; 21+ messages in thread
From: Steffen Trumtrar @ 2013-03-19 9:21 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
The bootrom only reads an image if the correct checksum is present in the
header. The calculation is pretty simple:
sum over all words from 0x20 to 0x44
Two of this words are the image length. That is why the checksum can not be
calculated until barebox_image_size is known.
The easiest solution is a program that has to be run after make.
Maybe this can be replaced with some linker-fu.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
scripts/Makefile | 1 +
scripts/zynq_checksum.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 73 insertions(+)
create mode 100644 scripts/zynq_checksum.c
diff --git a/scripts/Makefile b/scripts/Makefile
index 08b325c..41c892e 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -12,6 +12,7 @@ hostprogs-$(CONFIG_ARCH_NETX) += gen_netx_image
hostprogs-$(CONFIG_ARCH_OMAP) += omap_signGP mk-am35xx-spi-image
hostprogs-$(CONFIG_ARCH_S5PCxx) += s5p_cksum
hostprogs-$(CONFIG_ARCH_DAVINCI) += mkublheader
+hostprogs-$(CONFIG_ARCH_ZYNQ) += zynq_checksum
HOSTLOADLIBES_omap4_usbboot = -lpthread
omap4_usbboot-objs := usb_linux.o omap4_usbboot.o
diff --git a/scripts/zynq_checksum.c b/scripts/zynq_checksum.c
new file mode 100644
index 0000000..f32db61
--- /dev/null
+++ b/scripts/zynq_checksum.c
@@ -0,0 +1,72 @@
+#include <endian.h>
+#include <errno.h>
+#include <malloc.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/stat.h>
+
+static void usage(char *name)
+{
+ printf("Usage: %s barebox.bin <outfile>\n", name);
+}
+
+int main(int argc, char *argv[])
+{
+ FILE *ifile, *ofile;
+ unsigned int *buf;
+ const char *infile;
+ const char *outfile;
+ struct stat st;
+ unsigned int i;
+ unsigned long sum = 0;
+
+ if (argc != 3) {
+ usage(argv[0]);
+ exit(1);
+ }
+
+ infile = argv[1];
+ outfile = argv[2];
+
+ if (stat(infile, &st) == -1) {
+ perror("stat");
+ exit(EXIT_FAILURE);
+ }
+
+ buf = malloc(sizeof(*buf) * st.st_size);
+ if (!buf) {
+ fprintf(stderr, "Unable to allocate buffer\n");
+ return -1;
+ }
+ ifile = fopen(infile, "rb");
+ if (!ifile) {
+ fprintf(stderr, "Cannot open %s for reading\n",
+ infile);
+ free(buf);
+ exit(EXIT_FAILURE);
+ }
+ ofile = fopen(outfile, "wb");
+ if (!ofile) {
+ fprintf(stderr, "Cannot open %s for writing\n",
+ outfile);
+ fclose(ifile);
+ free(buf);
+ exit(EXIT_FAILURE);
+ }
+
+ fread(buf, 4, st.st_size, ifile);
+
+ for (i = 0x8; i < 0x12; i++)
+ sum += htole32(buf[i]);
+
+ sum = ~sum;
+ buf[i] = sum;
+
+ fwrite(buf, st.st_size / 4, 4, ofile);
+
+ fclose(ofile);
+ fclose(ifile);
+ free(buf);
+
+ return 0;
+}
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard
2013-03-19 9:21 [PATCH v2 0/5] ARM: add support for Zynq Steffen Trumtrar
` (3 preceding siblings ...)
2013-03-19 9:21 ` [PATCH v2 4/5] ARM: zynq: add zynq fsbl checksum script Steffen Trumtrar
@ 2013-03-19 9:22 ` Steffen Trumtrar
2013-03-19 13:40 ` Josh Cartwright
2013-03-19 15:28 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-19 12:59 ` [PATCH v2 0/5] ARM: add support for Zynq Josh Cartwright
5 siblings, 2 replies; 21+ messages in thread
From: Steffen Trumtrar @ 2013-03-19 9:22 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
The Avnet ZedBoard is an evalboard with a Zynq-7020 based MPSoC.
There is also a Digilent ZedBoard, that is the same but only for
academic customers.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
arch/arm/boards/avnet-zedboard/Makefile | 1 +
arch/arm/boards/avnet-zedboard/board.c | 38 ++++
arch/arm/boards/avnet-zedboard/config.h | 4 +
.../boards/avnet-zedboard/env/init/config-board | 7 +
| 76 +++++++
arch/arm/boards/avnet-zedboard/lowlevel.c | 252 +++++++++++++++++++++
arch/arm/configs/zedboard_defconfig | 45 ++++
7 files changed, 423 insertions(+)
create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
create mode 100644 arch/arm/boards/avnet-zedboard/board.c
create mode 100644 arch/arm/boards/avnet-zedboard/config.h
create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
create mode 100644 arch/arm/configs/zedboard_defconfig
diff --git a/arch/arm/boards/avnet-zedboard/Makefile b/arch/arm/boards/avnet-zedboard/Makefile
new file mode 100644
index 0000000..5c05544
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/Makefile
@@ -0,0 +1 @@
+obj-y += board.o lowlevel.o flash_header.o
diff --git a/arch/arm/boards/avnet-zedboard/board.c b/arch/arm/boards/avnet-zedboard/board.c
new file mode 100644
index 0000000..4e3d5a5
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/board.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/armlinux.h>
+#include <common.h>
+#include <environment.h>
+#include <generated/mach-types.h>
+#include <init.h>
+#include <mach/devices.h>
+#include <mach/zynq7000-regs.h>
+#include <sizes.h>
+
+static int zedboard_mem_init(void)
+{
+ arm_add_mem_device("ram0", 0, SZ_512M);
+
+ return 0;
+}
+mem_initcall(zedboard_mem_init);
+
+static int zedboard_console_init(void)
+{
+ zynq_add_uart1();
+
+ return 0;
+}
+console_initcall(zedboard_console_init);
diff --git a/arch/arm/boards/avnet-zedboard/config.h b/arch/arm/boards/avnet-zedboard/config.h
new file mode 100644
index 0000000..ca15136
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/config.h
@@ -0,0 +1,4 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/avnet-zedboard/env/init/config-board b/arch/arm/boards/avnet-zedboard/env/init/config-board
new file mode 100644
index 0000000..9957653
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/env/init/config-board
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# board defaults, do not change in running system. Change /env/config
+# instead
+
+global.hostname=ZedBoard
+global.linux.bootargs.base="console=ttyPS1,115200"
--git a/arch/arm/boards/avnet-zedboard/flash_header.c b/arch/arm/boards/avnet-zedboard/flash_header.c
new file mode 100644
index 0000000..e7e2f8d
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/flash_header.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/byteorder.h>
+#include <mach/zynq-flash-header.h>
+#include <mach/zynq7000-regs.h>
+#include <asm/barebox-arm-head.h>
+
+void __naked __flash_header_start go(void)
+{
+ __asm__ __volatile__ (
+ "b barebox_arm_reset_vector\n"
+ "1: b 1b\n"
+ "1: b 1b\n"
+ "1: b 1b\n"
+ "1: b 1b\n"
+ "1: b 1b\n"
+ "1: b 1b\n"
+ "1: b 1b\n"
+ );
+}
+
+#define REG(a, v) { .addr = cpu_to_le32(a), .val = cpu_to_le32(v), }
+
+struct zynq_reg_entry __ps7reg_entry_section reg_entry[] = {
+ REG(ZYNQ_SLCR_UNLOCK, 0x0000DF0D),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_CLK_621_TRUE, 0x00000001),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_APER_CLK_CTRL, 0x01FC044D),
+
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028008),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CFG, 0x000FA220),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028010),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028011),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028010),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028000),
+
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E008),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CFG, 0x001452C0),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E010),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E011),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E010),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E000),
+
+ REG(0xf8000150, 0x00000a03),
+
+ /* stop */
+ REG(0xFFFFFFFF, 0x00000000),
+};
+
+struct zynq_flash_header __flash_header_section flash_header = {
+ .width_det = WIDTH_DETECTION_MAGIC,
+ .image_id = IMAGE_IDENTIFICATION,
+ .enc_stat = 0x0,
+ .user = 0x0,
+ .flash_offset = 0x8c0,
+ .length = barebox_image_size,
+ .res0 = 0x0,
+ .start_of_exec = 0x0,
+ .total_len = barebox_image_size,
+ .res1 = 0x1,
+ .checksum = 0x0,
+ .res2 = 0x0,
+};
diff --git a/arch/arm/boards/avnet-zedboard/lowlevel.c b/arch/arm/boards/avnet-zedboard/lowlevel.c
new file mode 100644
index 0000000..b50886e
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/lowlevel.c
@@ -0,0 +1,252 @@
+/*
+ *
+ * (c) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <io.h>
+#include <asm/barebox-arm.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/zynq7000-regs.h>
+
+#define DCI_DONE (1 << 13)
+#define PLL_ARM_LOCK (1 << 0)
+#define PLL_DDR_LOCK (1 << 1)
+#define PLL_IO_LOCK (1 << 2)
+
+void __naked barebox_arm_reset_vector(void)
+{
+ /* open sesame */
+ writel(0x0000DF0D, ZYNQ_SLCR_UNLOCK);
+
+ /* turn on LD9 */
+ writel(0x00000200, 0xF800071C);
+ writel(0x00000080, 0xE000A204);
+ writel(0x00000080, 0xE000A000);
+
+ /* ps7_clock_init_data */
+ writel(0x1F000200, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_CLK_CTRL);
+ writel(0x00F00701, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DCI_CLK_CTRL);
+ writel(0x00002803, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_UART_CLK_CTRL);
+ writel(0x00000A03, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DBG_CLK_CTRL);
+ writel(0x00000501, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PCAP_CLK_CTRL);
+ writel(0x00000000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_TOPSW_CLK_CTRL);
+ writel(0x00100A00, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA0_CLK_CTRL);
+ writel(0x00100700, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA1_CLK_CTRL);
+ writel(0x00101400, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA2_CLK_CTRL);
+ writel(0x00101400, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA3_CLK_CTRL);
+ /* 6:2:1 mode */
+ writel(0x00000001, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_CLK_621_TRUE);
+ writel(0x01FC044D, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_APER_CLK_CTRL);
+
+ /* configure the PLLs */
+ /* ARM PLL */
+ writel(0x00028008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
+ writel(0x000FA220, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CFG);
+ writel(0x00028010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
+ writel(0x00028011, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
+ writel(0x00028010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
+
+ while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_ARM_LOCK))
+ ;
+ writel(0x00028000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
+
+ /* DDR PLL */
+ /* set to bypass mode */
+ writel(0x0001A018, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
+ /* assert reset */
+ writel(0x0001A019, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
+ /* set feedback divs */
+ writel(0x00020019, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
+ writel(0x0012C220, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CFG);
+ /* set ddr2xclk and ddr3xclk: 3,2 */
+ writel(0x0C200003, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_CLK_CTRL);
+ /* deassert reset */
+ writel(0x00020018, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
+ /* wait pll lock */
+ while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_DDR_LOCK))
+ ;
+ /* remove bypass mode */
+ writel(0x00020008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
+
+ /* IO PLL */
+ writel(0x0001E008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
+ writel(0x001452C0, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CFG);
+ writel(0x0001E010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
+ writel(0x0001E011, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
+ writel(0x0001E010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
+
+ while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_IO_LOCK))
+ ;
+ writel(0x0001E000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
+
+ /*
+ * INP_TYPE[1:2] = {off, vref, diff, lvcmos}
+ * DCI_UPDATE[3], TERM_EN[4]
+ * DCI_TYPE[5:6] = {off, drive, res, term}
+ * IBUF_DISABLE_MODE[7] = {ibuf, ibuf_disable}
+ * TERM_DISABLE_MODE[8] = {always, dynamic}
+ * OUTPUT_EN[9:10] = {ibuf, res, res, obuf}
+ * PULLUP_EN[11]
+ */
+ writel(0x00000600, ZYNQ_DDRIOB_ADDR0);
+ writel(0x00000600, ZYNQ_DDRIOB_ADDR1);
+ writel(0x00000672, ZYNQ_DDRIOB_DATA0);
+ writel(0x00000672, ZYNQ_DDRIOB_DATA1);
+ writel(0x00000674, ZYNQ_DDRIOB_DIFF0);
+ writel(0x00000674, ZYNQ_DDRIOB_DIFF1);
+ writel(0x00000600, ZYNQ_DDRIOB_CLOCK);
+ /*
+ * Drive_P[0:6], Drive_N[7:13]
+ * Slew_P[14:18], Slew_N[19:23]
+ * GTL[24:26], RTerm[27:31]
+ */
+ writel(0x00D6861C, ZYNQ_DDRIOB_DRIVE_SLEW_ADDR);
+ writel(0x00F9861C, ZYNQ_DDRIOB_DRIVE_SLEW_DATA);
+ writel(0x00F9861C, ZYNQ_DDRIOB_DRIVE_SLEW_DIFF);
+ writel(0x00D6861C, ZYNQ_DDRIOB_DRIVE_SLEW_CLOCK);
+ /*
+ * VREF_INT_EN[0]
+ * VREF_SEL[1:4] = {0001=0.6V, 0100=0.75V, 1000=0.9V}
+ * VREF_EXT_EN[5:6] = {dis/dis, dis/en, en/dis, en/en}
+ * RES[7:8], REFIO_EN[9]
+ */
+ /* FIXME: Xilinx sets this to internal, but Zedboard should support
+ external VRef, too */
+ writel(0x00000E09, ZYNQ_DDRIOB_DDR_CTRL);
+ /*
+ * RESET[0], ENABLE[1]
+ * NREF_OPT1[6:7], NREF_OPT2[8:10], NREF_OPT4[11:13]
+ * PREF_OPT1[14:15], PREF_OPT2[17:19], UPDATE_CONTROL[20]
+ */
+ writel(0x00000021, ZYNQ_DDRIOB_DCI_CTRL);
+ writel(0x00000020, ZYNQ_DDRIOB_DCI_CTRL);
+ writel(0x00100823, ZYNQ_DDRIOB_DCI_CTRL);
+
+ while (!(readl(ZYNQ_DDRIOB_DCI_STATUS) & DCI_DONE))
+ ;
+
+ writel(0x0E00E07F, 0xF8007000);
+
+ /* ps7_ddr_init_data */
+ writel(0x00000080, 0XF8006000);
+ writel(0x00081081, 0XF8006004);
+ writel(0x03C0780F, 0XF8006008);
+ writel(0x02001001, 0XF800600C);
+ writel(0x00014001, 0XF8006010);
+ writel(0x0004159B, 0XF8006014);
+ writel(0x452460D2, 0XF8006018);
+ writel(0x720238E5, 0XF800601C);
+ writel(0x272872D0, 0XF8006020);
+ writel(0x0000003C, 0XF8006024);
+ writel(0x00002007, 0XF8006028);
+ writel(0x00000008, 0XF800602C);
+ writel(0x00040930, 0XF8006030);
+ writel(0x00010694, 0XF8006034);
+ writel(0x00000000, 0XF8006038);
+ writel(0x00000777, 0XF800603C);
+ writel(0xFFF00000, 0XF8006040);
+ writel(0x0FF66666, 0XF8006044);
+ writel(0x0003C248, 0XF8006048);
+ writel(0x77010800, 0XF8006050);
+ writel(0x00000101, 0XF8006058);
+ writel(0x00005003, 0XF800605C);
+ writel(0x0000003E, 0XF8006060);
+ writel(0x00020000, 0XF8006064);
+ writel(0x00284141, 0XF8006068);
+ writel(0x00001610, 0XF800606C);
+ writel(0x00008000, 0XF80060A0);
+ writel(0x10200802, 0XF80060A4);
+ writel(0x0690CB73, 0XF80060A8);
+ writel(0x000001FE, 0XF80060AC);
+ writel(0x1CFFFFFF, 0XF80060B0);
+ writel(0x00000200, 0XF80060B4);
+ writel(0x00200066, 0XF80060B8);
+ writel(0x00000000, 0XF80060BC);
+ writel(0x00000000, 0XF80060C4);
+ writel(0x00000000, 0XF80060C8);
+ writel(0x00000000, 0XF80060DC);
+ writel(0x00000000, 0XF80060F0);
+ writel(0x00000008, 0XF80060F4);
+ writel(0x00000000, 0XF8006114);
+ writel(0x40000001, 0XF8006118);
+ writel(0x40000001, 0XF800611C);
+ writel(0x40000001, 0XF8006120);
+ writel(0x40000001, 0XF8006124);
+ writel(0x00033C03, 0XF800612C);
+ writel(0x00034003, 0XF8006130);
+ writel(0x0002F400, 0XF8006134);
+ writel(0x00030400, 0XF8006138);
+ writel(0x00000035, 0XF8006140);
+ writel(0x00000035, 0XF8006144);
+ writel(0x00000035, 0XF8006148);
+ writel(0x00000035, 0XF800614C);
+ writel(0x00000083, 0XF8006154);
+ writel(0x00000083, 0XF8006158);
+ writel(0x0000007F, 0XF800615C);
+ writel(0x00000078, 0XF8006160);
+ writel(0x00000124, 0XF8006168);
+ writel(0x00000125, 0XF800616C);
+ writel(0x00000112, 0XF8006170);
+ writel(0x00000116, 0XF8006174);
+ writel(0x000000C3, 0XF800617C);
+ writel(0x000000C3, 0XF8006180);
+ writel(0x000000BF, 0XF8006184);
+ writel(0x000000B8, 0XF8006188);
+ writel(0x10040080, 0XF8006190);
+ writel(0x0001FC82, 0XF8006194);
+ writel(0x00000000, 0XF8006204);
+ writel(0x000803FF, 0XF8006208);
+ writel(0x000803FF, 0XF800620C);
+ writel(0x000803FF, 0XF8006210);
+ writel(0x000803FF, 0XF8006214);
+ writel(0x000003FF, 0XF8006218);
+ writel(0x000003FF, 0XF800621C);
+ writel(0x000003FF, 0XF8006220);
+ writel(0x000003FF, 0XF8006224);
+ writel(0x00000000, 0XF80062A8);
+ writel(0x00000000, 0XF80062AC);
+ writel(0x00005125, 0XF80062B0);
+ writel(0x000012A8, 0XF80062B4);
+ writel(0x00000081, 0XF8006000);
+
+ /* poor mans pinctrl */
+ writel(0x000002E0, ZYNQ_MIO_BASE + 0xC0);
+ writel(0x000002E1, ZYNQ_MIO_BASE + 0xC4);
+ /* UART1 pinmux */
+ writel(0x000002E1, ZYNQ_MIO_BASE + 0xC8);
+ writel(0x000002E0, ZYNQ_MIO_BASE + 0xCC);
+
+ /* poor mans clkctrl */
+ writel(0x00001403, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_UART_CLK_CTRL);
+
+ writel(0x00000001, 0xf8000138);
+ writel(0x00100801, 0xf8000140);
+ writel(0x00000302, 0xf8000740);
+ writel(0x00000302, 0xf8000744);
+ writel(0x00000302, 0xf8000748);
+ writel(0x00000302, 0xf800074C);
+ writel(0x00000302, 0xf8000750);
+ writel(0x00000302, 0xf8000754);
+
+ writel(0x00000001, 0xf8000B00);
+
+ /* lock up. secure, secure */
+ writel(0x0000767B, ZYNQ_SLCR_LOCK);
+
+ arm_cpu_lowlevel_init();
+ barebox_arm_entry(0, SZ_512M, 0);
+}
diff --git a/arch/arm/configs/zedboard_defconfig b/arch/arm/configs/zedboard_defconfig
new file mode 100644
index 0000000..978689f
--- /dev/null
+++ b/arch/arm/configs/zedboard_defconfig
@@ -0,0 +1,45 @@
+CONFIG_ARCH_ZYNQ=y
+CONFIG_AEABI=y
+CONFIG_CMD_ARM_MMUINFO=y
+CONFIG_ARM_UNWIND=y
+CONFIG_MMU=y
+CONFIG_STACK_SIZE=0xf000
+CONFIG_MALLOC_SIZE=0x8000000
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/avnet-zedboard/env"
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_DIRNAME=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_READLINK=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_OFTREE_PROBE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+# CONFIG_CMD_HELP is not set
+CONFIG_CMD_CLK=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+# CONFIG_SPI is not set
+CONFIG_FS_TFTP=y
+CONFIG_DIGEST=y
+CONFIG_MD5=y
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 0/5] ARM: add support for Zynq
2013-03-19 9:21 [PATCH v2 0/5] ARM: add support for Zynq Steffen Trumtrar
` (4 preceding siblings ...)
2013-03-19 9:22 ` [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard Steffen Trumtrar
@ 2013-03-19 12:59 ` Josh Cartwright
2013-03-19 13:57 ` Steffen Trumtrar
5 siblings, 1 reply; 21+ messages in thread
From: Josh Cartwright @ 2013-03-19 12:59 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On Tue, Mar 19, 2013 at 10:21:55AM +0100, Steffen Trumtrar wrote:
> Hi!
>
> Still nothing fancy. Boots a little faster from SD and has a console.
> For ethernet the macb-driver works fine,
I've also found the macb driver works, but it does require a change to
prevent byteswapping during DMA, have you run into this on the ZedBoard?
(patch below).
Also, have you thought about how you'll handle the OCM mapping? For my
testing, I'm using a PBL image (which contains the lowlevel init), but I
still need some hook into the decompressed image to remove the OCM
mapping from the lower address space. This can't be done during the
execution of the PBL image, since it's running from OCM.
As far as I could tell, there was no good way to hook in early to the
decompressed image.
I ran into this trying to boot the 14.4 release uImage, since it has a
load address of 0x8000, and spans the 'hole' at 0x30000 configured out
of BootROM to be 'Reserved' (writes to here trigger a Data Abort).
> but needs to be "freed" from its at91 heritage (meaning: the struct
> at91_ether_platform_data should be renamed first and defined someplace
> else than a board.h)
I'm assuming you've done this, but if not, I've made this change in my
tree. For what it's worth, I went with 'struct macb_platform_data' and
moved it into include/platform_data/macb.h.
>
> Changelog:
> - addressed all comments by Sascha and Josh
> (some uart stuff, defines, endianess, ...)
> - squashed a little
>
> Regards,
> Steffen
-- 8< --
Subject: [PATCH] macb: disable byte-order translation through DMA
Packet data already exists in memory in network byte-order. Prevent the
GEM from performing endianness translation through DMA.
Signed-off-by: Josh Cartwright <joshc@eso.teric.us>
---
drivers/net/macb.c | 1 +
drivers/net/macb.h | 2 ++
2 files changed, 3 insertions(+)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 14a0689..25d1b9f 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -307,6 +307,7 @@ static void macb_configure_dma(struct macb_device *bp)
dmacfg |= GEM_BF(FBLDO, 16);
dmacfg |= GEM_BIT(TXPBMS) | GEM_BF(RXBMS, -1L);
dmacfg |= GEM_BIT(DDRP);
+ dmacfg &= ~GEM_BIT(ENDIAN);
gem_writel(bp, DMACFG, dmacfg);
}
}
diff --git a/drivers/net/macb.h b/drivers/net/macb.h
index cadd561..fc4d1a9 100644
--- a/drivers/net/macb.h
+++ b/drivers/net/macb.h
@@ -168,6 +168,8 @@
/* Bitfields in DMACFG. */
#define GEM_FBLDO_OFFSET 0
#define GEM_FBLDO_SIZE 5
+#define GEM_ENDIAN_OFFSET 7
+#define GEM_ENDIAN_SIZE 1
#define GEM_RXBMS_OFFSET 8
#define GEM_RXBMS_SIZE 2
#define GEM_TXPBMS_OFFSET 10
--
1.8.1.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/5] ARM: zynq: Add new architecture zynq
2013-03-19 9:21 ` [PATCH v2 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
@ 2013-03-19 13:05 ` Josh Cartwright
2013-03-19 13:18 ` Josh Cartwright
2013-03-19 15:26 ` Jean-Christophe PLAGNIOL-VILLARD
2 siblings, 0 replies; 21+ messages in thread
From: Josh Cartwright @ 2013-03-19 13:05 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On Tue, Mar 19, 2013 at 10:21:57AM +0100, Steffen Trumtrar wrote:
> Add basic support for the Xilinx Zynq-7000 EPP architecture.
> The Zynq-7000 is an embedded processing platform that combines a Cortex A9
> dualcore MPSoC with an Artix-7 FPGA.
>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
[..]
> +static int zynq_init(void)
> +{
> + u32 val;
> +
> + dsb();
> + isb();
> + writel(0xDF0D, ZYNQ_SLCR_UNLOCK);
> + /* remap ocm high */
> + writel(0x0000000F, 0xf8000910);
> + /* mpcore.filtering_start_address */
> + writel(0x00000000, 0xf8f00040);
> + /* mpcore.filtering_end_address */
> + writel(0xffe00000, 0xf8f00044);
> + val = readl(0xf8f00000);
> + val |= 0x2;
> + writel(val, 0xf8f00000);
> + dmb();
Doh! I should have read this before replying! This is what I was
looking for!
I think this will work nicely.
Josh
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/5] ARM: zynq: Add new architecture zynq
2013-03-19 9:21 ` [PATCH v2 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
2013-03-19 13:05 ` Josh Cartwright
@ 2013-03-19 13:18 ` Josh Cartwright
2013-03-19 13:31 ` Steffen Trumtrar
2013-03-19 15:26 ` Jean-Christophe PLAGNIOL-VILLARD
2 siblings, 1 reply; 21+ messages in thread
From: Josh Cartwright @ 2013-03-19 13:18 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On Tue, Mar 19, 2013 at 10:21:57AM +0100, Steffen Trumtrar wrote:
> Add basic support for the Xilinx Zynq-7000 EPP architecture.
> The Zynq-7000 is an embedded processing platform that combines a Cortex A9
> dualcore MPSoC with an Artix-7 FPGA.
>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
[..]
> diff --git a/arch/arm/mach-zynq/include/mach/zynq-flash-header.h b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> new file mode 100644
> index 0000000..a0251cb
> --- /dev/null
> +++ b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> @@ -0,0 +1,40 @@
> +#ifndef __MACH_FLASH_HEADER_H
> +#define __MACH_FLASH_HEADER_H
> +
> +#include <asm-generic/sections.h>
> +
> +#define __flash_header_start __section(.flash_header_start)
> +
> +#define __flash_header_section __section(.flash_header_0x0)
> +#define __ps7reg_entry_section __section(.ps7reg_entry_0x0A0)
> +#define __image_len_section __section(.image_len_0x08c0)
> +#define FLASH_HEADER_OFFSET 0x0
> +#define IMAGE_OFFSET 0x8c0
> +
> +#define DEST_BASE 0x8c0
> +#define FLASH_HEADER_BASE (DEST_BASE + FLASH_HEADER_OFFSET)
> +
> +struct zynq_reg_entry {
> + __le32 addr;
> + __le32 val;
> +};
> +
> +#define WIDTH_DETECTION_MAGIC 0xAA995566
> +#define IMAGE_IDENTIFICATION 0x584C4E58 /* "XLNX" */
> +
> +struct zynq_flash_header {
> + uint32_t width_det;
> + uint32_t image_id;
> + uint32_t enc_stat;
> + uint32_t user;
> + uint32_t flash_offset;
> + uint32_t length;
> + uint32_t res0;
> + uint32_t start_of_exec;
> + uint32_t total_len;
> + uint32_t res1;
> + uint32_t checksum;
> + uint32_t res2;
> +};
Did you disagree with my suggestion last time around of merging the
flash_header and ps7reg_entry sections? At the very least, it seems
inconsistent that the zynq_reg_entrys have type __le32, and the members
of zynq_flash_header are uint32_t (even though they have the same
endianness requirement).
I still maintain you should move the REG macro currently in the board
flash_header.c here.
Josh
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000
2013-03-19 9:21 ` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
@ 2013-03-19 13:29 ` Josh Cartwright
2013-03-19 13:35 ` Steffen Trumtrar
0 siblings, 1 reply; 21+ messages in thread
From: Josh Cartwright @ 2013-03-19 13:29 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On Tue, Mar 19, 2013 at 10:21:58AM +0100, Steffen Trumtrar wrote:
> This adds support for the clocktree on zynq7000 SoCs.
> The patch is based on clocks.c from the larger patch
> ARM: zynq: add suppport for Zynq 7000 SoC
> by Josh Cartwright.
>
> The driver in that patch is converted to a platform_driver and code to
> enable plls was added.
>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
[..]
> +
> +static int zynq_clock_probe(struct device_d *dev)
> +{
> + void __iomem *slcr_base;
> + unsigned long ps_clk_rate = 33333330;
My version of the patchset had this ^ configurable, since it's possible
a different osc could be used on the board. Any reason why you've
hardcoded this instead?
Josh
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/5] ARM: zynq: Add new architecture zynq
2013-03-19 13:18 ` Josh Cartwright
@ 2013-03-19 13:31 ` Steffen Trumtrar
0 siblings, 0 replies; 21+ messages in thread
From: Steffen Trumtrar @ 2013-03-19 13:31 UTC (permalink / raw)
To: Josh Cartwright; +Cc: barebox
On Tue, Mar 19, 2013 at 08:18:02AM -0500, Josh Cartwright wrote:
> On Tue, Mar 19, 2013 at 10:21:57AM +0100, Steffen Trumtrar wrote:
> > Add basic support for the Xilinx Zynq-7000 EPP architecture.
> > The Zynq-7000 is an embedded processing platform that combines a Cortex A9
> > dualcore MPSoC with an Artix-7 FPGA.
> >
> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > ---
> [..]
> > diff --git a/arch/arm/mach-zynq/include/mach/zynq-flash-header.h b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> > new file mode 100644
> > index 0000000..a0251cb
> > --- /dev/null
> > +++ b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> > @@ -0,0 +1,40 @@
> > +#ifndef __MACH_FLASH_HEADER_H
> > +#define __MACH_FLASH_HEADER_H
> > +
> > +#include <asm-generic/sections.h>
> > +
> > +#define __flash_header_start __section(.flash_header_start)
> > +
> > +#define __flash_header_section __section(.flash_header_0x0)
> > +#define __ps7reg_entry_section __section(.ps7reg_entry_0x0A0)
> > +#define __image_len_section __section(.image_len_0x08c0)
> > +#define FLASH_HEADER_OFFSET 0x0
> > +#define IMAGE_OFFSET 0x8c0
> > +
> > +#define DEST_BASE 0x8c0
> > +#define FLASH_HEADER_BASE (DEST_BASE + FLASH_HEADER_OFFSET)
> > +
> > +struct zynq_reg_entry {
> > + __le32 addr;
> > + __le32 val;
> > +};
> > +
> > +#define WIDTH_DETECTION_MAGIC 0xAA995566
> > +#define IMAGE_IDENTIFICATION 0x584C4E58 /* "XLNX" */
> > +
> > +struct zynq_flash_header {
> > + uint32_t width_det;
> > + uint32_t image_id;
> > + uint32_t enc_stat;
> > + uint32_t user;
> > + uint32_t flash_offset;
> > + uint32_t length;
> > + uint32_t res0;
> > + uint32_t start_of_exec;
> > + uint32_t total_len;
> > + uint32_t res1;
> > + uint32_t checksum;
> > + uint32_t res2;
> > +};
>
> Did you disagree with my suggestion last time around of merging the
> flash_header and ps7reg_entry sections? At the very least, it seems
> inconsistent that the zynq_reg_entrys have type __le32, and the members
> of zynq_flash_header are uint32_t (even though they have the same
> endianness requirement).
Actually, I seem to have missed that comment.
The types should be the same. Yes. I have to fix that.
>
> I still maintain you should move the REG macro currently in the board
> flash_header.c here.
>
Hm, ok. I will do that.
Regards,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000
2013-03-19 13:29 ` Josh Cartwright
@ 2013-03-19 13:35 ` Steffen Trumtrar
2013-03-19 13:48 ` Josh Cartwright
0 siblings, 1 reply; 21+ messages in thread
From: Steffen Trumtrar @ 2013-03-19 13:35 UTC (permalink / raw)
To: Josh Cartwright; +Cc: barebox
On Tue, Mar 19, 2013 at 08:29:54AM -0500, Josh Cartwright wrote:
> On Tue, Mar 19, 2013 at 10:21:58AM +0100, Steffen Trumtrar wrote:
> > This adds support for the clocktree on zynq7000 SoCs.
> > The patch is based on clocks.c from the larger patch
> > ARM: zynq: add suppport for Zynq 7000 SoC
> > by Josh Cartwright.
> >
> > The driver in that patch is converted to a platform_driver and code to
> > enable plls was added.
> >
> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > ---
> [..]
> > +
> > +static int zynq_clock_probe(struct device_d *dev)
> > +{
> > + void __iomem *slcr_base;
> > + unsigned long ps_clk_rate = 33333330;
>
> My version of the patchset had this ^ configurable, since it's possible
> a different osc could be used on the board. Any reason why you've
> hardcoded this instead?
>
Hm, not really any good reason. But the plan is to get this from the
devicetree instead. I didn't get around to actually doing that.
Do your boards have another osc or would a hardcoded value suffice for
the moment?
str
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard
2013-03-19 9:22 ` [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard Steffen Trumtrar
@ 2013-03-19 13:40 ` Josh Cartwright
2013-03-19 13:47 ` Steffen Trumtrar
2013-03-19 15:28 ` Jean-Christophe PLAGNIOL-VILLARD
1 sibling, 1 reply; 21+ messages in thread
From: Josh Cartwright @ 2013-03-19 13:40 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On Tue, Mar 19, 2013 at 10:22:00AM +0100, Steffen Trumtrar wrote:
> The Avnet ZedBoard is an evalboard with a Zynq-7020 based MPSoC.
> There is also a Digilent ZedBoard, that is the same but only for
> academic customers.
>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
> arch/arm/boards/avnet-zedboard/Makefile | 1 +
> arch/arm/boards/avnet-zedboard/board.c | 38 ++++
> arch/arm/boards/avnet-zedboard/config.h | 4 +
> .../boards/avnet-zedboard/env/init/config-board | 7 +
> arch/arm/boards/avnet-zedboard/flash_header.c | 76 +++++++
> arch/arm/boards/avnet-zedboard/lowlevel.c | 252 +++++++++++++++++++++
> arch/arm/configs/zedboard_defconfig | 45 ++++
> 7 files changed, 423 insertions(+)
> create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
> create mode 100644 arch/arm/boards/avnet-zedboard/board.c
> create mode 100644 arch/arm/boards/avnet-zedboard/config.h
> create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
> create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
> create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
> create mode 100644 arch/arm/configs/zedboard_defconfig
>
> diff --git a/arch/arm/boards/avnet-zedboard/Makefile b/arch/arm/boards/avnet-zedboard/Makefile
> new file mode 100644
> index 0000000..5c05544
> --- /dev/null
> +++ b/arch/arm/boards/avnet-zedboard/Makefile
> @@ -0,0 +1 @@
> +obj-y += board.o lowlevel.o flash_header.o
Should lowlevel.o and flash_header.o only be built into the PBL image?
[..]
> diff --git a/arch/arm/boards/avnet-zedboard/flash_header.c b/arch/arm/boards/avnet-zedboard/flash_header.c
> new file mode 100644
> index 0000000..e7e2f8d
> --- /dev/null
> +++ b/arch/arm/boards/avnet-zedboard/flash_header.c
> @@ -0,0 +1,76 @@
[..]
> +#define REG(a, v) { .addr = cpu_to_le32(a), .val = cpu_to_le32(v), }
> +
> +struct zynq_reg_entry __ps7reg_entry_section reg_entry[] = {
> + REG(ZYNQ_SLCR_UNLOCK, 0x0000DF0D),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_CLK_621_TRUE, 0x00000001),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_APER_CLK_CTRL, 0x01FC044D),
> +
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028008),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CFG, 0x000FA220),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028010),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028011),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028010),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028000),
> +
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E008),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CFG, 0x001452C0),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E010),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E011),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E010),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E000),
> +
> + REG(0xf8000150, 0x00000a03),
> +
> + /* stop */
> + REG(0xFFFFFFFF, 0x00000000),
> +};
> +
[..]
> diff --git a/arch/arm/boards/avnet-zedboard/lowlevel.c b/arch/arm/boards/avnet-zedboard/lowlevel.c
> new file mode 100644
> index 0000000..b50886e
> --- /dev/null
> +++ b/arch/arm/boards/avnet-zedboard/lowlevel.c
[..]
> +void __naked barebox_arm_reset_vector(void)
> +{
> + /* open sesame */
> + writel(0x0000DF0D, ZYNQ_SLCR_UNLOCK);
> +
> + /* turn on LD9 */
> + writel(0x00000200, 0xF800071C);
> + writel(0x00000080, 0xE000A204);
> + writel(0x00000080, 0xE000A000);
> +
> + /* ps7_clock_init_data */
> + writel(0x1F000200, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_CLK_CTRL);
> + writel(0x00F00701, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DCI_CLK_CTRL);
> + writel(0x00002803, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_UART_CLK_CTRL);
> + writel(0x00000A03, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DBG_CLK_CTRL);
> + writel(0x00000501, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PCAP_CLK_CTRL);
> + writel(0x00000000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_TOPSW_CLK_CTRL);
> + writel(0x00100A00, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA0_CLK_CTRL);
> + writel(0x00100700, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA1_CLK_CTRL);
> + writel(0x00101400, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA2_CLK_CTRL);
> + writel(0x00101400, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA3_CLK_CTRL);
> + /* 6:2:1 mode */
> + writel(0x00000001, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_CLK_621_TRUE);
> + writel(0x01FC044D, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_APER_CLK_CTRL);
> +
> + /* configure the PLLs */
> + /* ARM PLL */
> + writel(0x00028008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> + writel(0x000FA220, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CFG);
> + writel(0x00028010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> + writel(0x00028011, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> + writel(0x00028010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
Any particular reason why you are configuring the ARM and IO PLLs twice?
(once in the ps7_reg section in the flash header, and once here?)
> +
> + while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_ARM_LOCK))
> + ;
> + writel(0x00028000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> +
> + /* DDR PLL */
> + /* set to bypass mode */
> + writel(0x0001A018, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> + /* assert reset */
> + writel(0x0001A019, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> + /* set feedback divs */
> + writel(0x00020019, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> + writel(0x0012C220, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CFG);
> + /* set ddr2xclk and ddr3xclk: 3,2 */
> + writel(0x0C200003, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_CLK_CTRL);
> + /* deassert reset */
> + writel(0x00020018, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> + /* wait pll lock */
> + while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_DDR_LOCK))
> + ;
> + /* remove bypass mode */
> + writel(0x00020008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> +
> + /* IO PLL */
> + writel(0x0001E008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> + writel(0x001452C0, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CFG);
> + writel(0x0001E010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> + writel(0x0001E011, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> + writel(0x0001E010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> +
> + while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_IO_LOCK))
> + ;
> + writel(0x0001E000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> +
> + /*
> + * INP_TYPE[1:2] = {off, vref, diff, lvcmos}
> + * DCI_UPDATE[3], TERM_EN[4]
> + * DCI_TYPE[5:6] = {off, drive, res, term}
> + * IBUF_DISABLE_MODE[7] = {ibuf, ibuf_disable}
> + * TERM_DISABLE_MODE[8] = {always, dynamic}
> + * OUTPUT_EN[9:10] = {ibuf, res, res, obuf}
> + * PULLUP_EN[11]
> + */
> + writel(0x00000600, ZYNQ_DDRIOB_ADDR0);
> + writel(0x00000600, ZYNQ_DDRIOB_ADDR1);
> + writel(0x00000672, ZYNQ_DDRIOB_DATA0);
> + writel(0x00000672, ZYNQ_DDRIOB_DATA1);
> + writel(0x00000674, ZYNQ_DDRIOB_DIFF0);
> + writel(0x00000674, ZYNQ_DDRIOB_DIFF1);
> + writel(0x00000600, ZYNQ_DDRIOB_CLOCK);
> + /*
> + * Drive_P[0:6], Drive_N[7:13]
> + * Slew_P[14:18], Slew_N[19:23]
> + * GTL[24:26], RTerm[27:31]
> + */
> + writel(0x00D6861C, ZYNQ_DDRIOB_DRIVE_SLEW_ADDR);
> + writel(0x00F9861C, ZYNQ_DDRIOB_DRIVE_SLEW_DATA);
> + writel(0x00F9861C, ZYNQ_DDRIOB_DRIVE_SLEW_DIFF);
> + writel(0x00D6861C, ZYNQ_DDRIOB_DRIVE_SLEW_CLOCK);
> + /*
> + * VREF_INT_EN[0]
> + * VREF_SEL[1:4] = {0001=0.6V, 0100=0.75V, 1000=0.9V}
> + * VREF_EXT_EN[5:6] = {dis/dis, dis/en, en/dis, en/en}
> + * RES[7:8], REFIO_EN[9]
> + */
> + /* FIXME: Xilinx sets this to internal, but Zedboard should support
> + external VRef, too */
> + writel(0x00000E09, ZYNQ_DDRIOB_DDR_CTRL);
> + /*
> + * RESET[0], ENABLE[1]
> + * NREF_OPT1[6:7], NREF_OPT2[8:10], NREF_OPT4[11:13]
> + * PREF_OPT1[14:15], PREF_OPT2[17:19], UPDATE_CONTROL[20]
> + */
> + writel(0x00000021, ZYNQ_DDRIOB_DCI_CTRL);
> + writel(0x00000020, ZYNQ_DDRIOB_DCI_CTRL);
> + writel(0x00100823, ZYNQ_DDRIOB_DCI_CTRL);
> +
> + while (!(readl(ZYNQ_DDRIOB_DCI_STATUS) & DCI_DONE))
> + ;
> +
> + writel(0x0E00E07F, 0xF8007000);
> +
> + /* ps7_ddr_init_data */
> + writel(0x00000080, 0XF8006000);
> + writel(0x00081081, 0XF8006004);
> + writel(0x03C0780F, 0XF8006008);
> + writel(0x02001001, 0XF800600C);
> + writel(0x00014001, 0XF8006010);
> + writel(0x0004159B, 0XF8006014);
> + writel(0x452460D2, 0XF8006018);
> + writel(0x720238E5, 0XF800601C);
> + writel(0x272872D0, 0XF8006020);
[..]
> + writel(0x000003FF, 0XF800621C);
> + writel(0x000003FF, 0XF8006220);
> + writel(0x000003FF, 0XF8006224);
> + writel(0x00000000, 0XF80062A8);
> + writel(0x00000000, 0XF80062AC);
> + writel(0x00005125, 0XF80062B0);
> + writel(0x000012A8, 0XF80062B4);
> + writel(0x00000081, 0XF8006000);
Interestingly, this data is identical for the zc702.
Josh
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard
2013-03-19 13:40 ` Josh Cartwright
@ 2013-03-19 13:47 ` Steffen Trumtrar
0 siblings, 0 replies; 21+ messages in thread
From: Steffen Trumtrar @ 2013-03-19 13:47 UTC (permalink / raw)
To: Josh Cartwright; +Cc: barebox
On Tue, Mar 19, 2013 at 08:40:42AM -0500, Josh Cartwright wrote:
> On Tue, Mar 19, 2013 at 10:22:00AM +0100, Steffen Trumtrar wrote:
> > The Avnet ZedBoard is an evalboard with a Zynq-7020 based MPSoC.
> > There is also a Digilent ZedBoard, that is the same but only for
> > academic customers.
> >
> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > ---
> > arch/arm/boards/avnet-zedboard/Makefile | 1 +
> > arch/arm/boards/avnet-zedboard/board.c | 38 ++++
> > arch/arm/boards/avnet-zedboard/config.h | 4 +
> > .../boards/avnet-zedboard/env/init/config-board | 7 +
> > arch/arm/boards/avnet-zedboard/flash_header.c | 76 +++++++
> > arch/arm/boards/avnet-zedboard/lowlevel.c | 252 +++++++++++++++++++++
> > arch/arm/configs/zedboard_defconfig | 45 ++++
> > 7 files changed, 423 insertions(+)
> > create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
> > create mode 100644 arch/arm/boards/avnet-zedboard/board.c
> > create mode 100644 arch/arm/boards/avnet-zedboard/config.h
> > create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
> > create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
> > create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
> > create mode 100644 arch/arm/configs/zedboard_defconfig
> >
> > diff --git a/arch/arm/boards/avnet-zedboard/Makefile b/arch/arm/boards/avnet-zedboard/Makefile
> > new file mode 100644
> > index 0000000..5c05544
> > --- /dev/null
> > +++ b/arch/arm/boards/avnet-zedboard/Makefile
> > @@ -0,0 +1 @@
> > +obj-y += board.o lowlevel.o flash_header.o
>
> Should lowlevel.o and flash_header.o only be built into the PBL image?
>
I didn't get around to using PBL. But, yes.
> [..]
> > diff --git a/arch/arm/boards/avnet-zedboard/flash_header.c b/arch/arm/boards/avnet-zedboard/flash_header.c
> > new file mode 100644
> > index 0000000..e7e2f8d
> > --- /dev/null
> > +++ b/arch/arm/boards/avnet-zedboard/flash_header.c
> > @@ -0,0 +1,76 @@
> [..]
> > +#define REG(a, v) { .addr = cpu_to_le32(a), .val = cpu_to_le32(v), }
> > +
> > +struct zynq_reg_entry __ps7reg_entry_section reg_entry[] = {
> > + REG(ZYNQ_SLCR_UNLOCK, 0x0000DF0D),
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_CLK_621_TRUE, 0x00000001),
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_APER_CLK_CTRL, 0x01FC044D),
> > +
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028008),
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CFG, 0x000FA220),
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028010),
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028011),
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028010),
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028000),
> > +
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E008),
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CFG, 0x001452C0),
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E010),
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E011),
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E010),
> > + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E000),
> > +
> > + REG(0xf8000150, 0x00000a03),
> > +
> > + /* stop */
> > + REG(0xFFFFFFFF, 0x00000000),
> > +};
> > +
> [..]
> > diff --git a/arch/arm/boards/avnet-zedboard/lowlevel.c b/arch/arm/boards/avnet-zedboard/lowlevel.c
> > new file mode 100644
> > index 0000000..b50886e
> > --- /dev/null
> > +++ b/arch/arm/boards/avnet-zedboard/lowlevel.c
> [..]
> > +void __naked barebox_arm_reset_vector(void)
> > +{
> > + /* open sesame */
> > + writel(0x0000DF0D, ZYNQ_SLCR_UNLOCK);
> > +
> > + /* turn on LD9 */
> > + writel(0x00000200, 0xF800071C);
> > + writel(0x00000080, 0xE000A204);
> > + writel(0x00000080, 0xE000A000);
> > +
> > + /* ps7_clock_init_data */
> > + writel(0x1F000200, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_CLK_CTRL);
> > + writel(0x00F00701, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DCI_CLK_CTRL);
> > + writel(0x00002803, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_UART_CLK_CTRL);
> > + writel(0x00000A03, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DBG_CLK_CTRL);
> > + writel(0x00000501, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PCAP_CLK_CTRL);
> > + writel(0x00000000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_TOPSW_CLK_CTRL);
> > + writel(0x00100A00, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA0_CLK_CTRL);
> > + writel(0x00100700, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA1_CLK_CTRL);
> > + writel(0x00101400, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA2_CLK_CTRL);
> > + writel(0x00101400, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA3_CLK_CTRL);
> > + /* 6:2:1 mode */
> > + writel(0x00000001, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_CLK_621_TRUE);
> > + writel(0x01FC044D, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_APER_CLK_CTRL);
> > +
> > + /* configure the PLLs */
> > + /* ARM PLL */
> > + writel(0x00028008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> > + writel(0x000FA220, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CFG);
> > + writel(0x00028010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> > + writel(0x00028011, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> > + writel(0x00028010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
>
> Any particular reason why you are configuring the ARM and IO PLLs twice?
> (once in the ps7_reg section in the flash header, and once here?)
>
I'm trying around with boot performance. With the configuration in the
flash header I am at 3-4 secs which is pretty sad (on other SoCs you can start
linux in the time the BootRom needs to copy barebox to ocm), but way better than
what u-boot achieves.
The pll configs in lowlevel_init will hopefully vanish and be handled by the
clkdev driver. But at the moment this is done twice, yeah. The flash_header
part should be useless.
> > +
> > + while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_ARM_LOCK))
> > + ;
> > + writel(0x00028000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> > +
> > + /* DDR PLL */
> > + /* set to bypass mode */
> > + writel(0x0001A018, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> > + /* assert reset */
> > + writel(0x0001A019, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> > + /* set feedback divs */
> > + writel(0x00020019, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> > + writel(0x0012C220, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CFG);
> > + /* set ddr2xclk and ddr3xclk: 3,2 */
> > + writel(0x0C200003, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_CLK_CTRL);
> > + /* deassert reset */
> > + writel(0x00020018, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> > + /* wait pll lock */
> > + while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_DDR_LOCK))
> > + ;
> > + /* remove bypass mode */
> > + writel(0x00020008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> > +
> > + /* IO PLL */
> > + writel(0x0001E008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> > + writel(0x001452C0, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CFG);
> > + writel(0x0001E010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> > + writel(0x0001E011, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> > + writel(0x0001E010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> > +
> > + while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_IO_LOCK))
> > + ;
> > + writel(0x0001E000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> > +
> > + /*
> > + * INP_TYPE[1:2] = {off, vref, diff, lvcmos}
> > + * DCI_UPDATE[3], TERM_EN[4]
> > + * DCI_TYPE[5:6] = {off, drive, res, term}
> > + * IBUF_DISABLE_MODE[7] = {ibuf, ibuf_disable}
> > + * TERM_DISABLE_MODE[8] = {always, dynamic}
> > + * OUTPUT_EN[9:10] = {ibuf, res, res, obuf}
> > + * PULLUP_EN[11]
> > + */
> > + writel(0x00000600, ZYNQ_DDRIOB_ADDR0);
> > + writel(0x00000600, ZYNQ_DDRIOB_ADDR1);
> > + writel(0x00000672, ZYNQ_DDRIOB_DATA0);
> > + writel(0x00000672, ZYNQ_DDRIOB_DATA1);
> > + writel(0x00000674, ZYNQ_DDRIOB_DIFF0);
> > + writel(0x00000674, ZYNQ_DDRIOB_DIFF1);
> > + writel(0x00000600, ZYNQ_DDRIOB_CLOCK);
> > + /*
> > + * Drive_P[0:6], Drive_N[7:13]
> > + * Slew_P[14:18], Slew_N[19:23]
> > + * GTL[24:26], RTerm[27:31]
> > + */
> > + writel(0x00D6861C, ZYNQ_DDRIOB_DRIVE_SLEW_ADDR);
> > + writel(0x00F9861C, ZYNQ_DDRIOB_DRIVE_SLEW_DATA);
> > + writel(0x00F9861C, ZYNQ_DDRIOB_DRIVE_SLEW_DIFF);
> > + writel(0x00D6861C, ZYNQ_DDRIOB_DRIVE_SLEW_CLOCK);
> > + /*
> > + * VREF_INT_EN[0]
> > + * VREF_SEL[1:4] = {0001=0.6V, 0100=0.75V, 1000=0.9V}
> > + * VREF_EXT_EN[5:6] = {dis/dis, dis/en, en/dis, en/en}
> > + * RES[7:8], REFIO_EN[9]
> > + */
> > + /* FIXME: Xilinx sets this to internal, but Zedboard should support
> > + external VRef, too */
> > + writel(0x00000E09, ZYNQ_DDRIOB_DDR_CTRL);
> > + /*
> > + * RESET[0], ENABLE[1]
> > + * NREF_OPT1[6:7], NREF_OPT2[8:10], NREF_OPT4[11:13]
> > + * PREF_OPT1[14:15], PREF_OPT2[17:19], UPDATE_CONTROL[20]
> > + */
> > + writel(0x00000021, ZYNQ_DDRIOB_DCI_CTRL);
> > + writel(0x00000020, ZYNQ_DDRIOB_DCI_CTRL);
> > + writel(0x00100823, ZYNQ_DDRIOB_DCI_CTRL);
> > +
> > + while (!(readl(ZYNQ_DDRIOB_DCI_STATUS) & DCI_DONE))
> > + ;
> > +
> > + writel(0x0E00E07F, 0xF8007000);
> > +
> > + /* ps7_ddr_init_data */
> > + writel(0x00000080, 0XF8006000);
> > + writel(0x00081081, 0XF8006004);
> > + writel(0x03C0780F, 0XF8006008);
> > + writel(0x02001001, 0XF800600C);
> > + writel(0x00014001, 0XF8006010);
> > + writel(0x0004159B, 0XF8006014);
> > + writel(0x452460D2, 0XF8006018);
> > + writel(0x720238E5, 0XF800601C);
> > + writel(0x272872D0, 0XF8006020);
> [..]
> > + writel(0x000003FF, 0XF800621C);
> > + writel(0x000003FF, 0XF8006220);
> > + writel(0x000003FF, 0XF8006224);
> > + writel(0x00000000, 0XF80062A8);
> > + writel(0x00000000, 0XF80062AC);
> > + writel(0x00005125, 0XF80062B0);
> > + writel(0x000012A8, 0XF80062B4);
> > + writel(0x00000081, 0XF8006000);
>
> Interestingly, this data is identical for the zc702.
>
Interesting. I would have guessed the RAM to be a likely difference.
str
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000
2013-03-19 13:35 ` Steffen Trumtrar
@ 2013-03-19 13:48 ` Josh Cartwright
0 siblings, 0 replies; 21+ messages in thread
From: Josh Cartwright @ 2013-03-19 13:48 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On Tue, Mar 19, 2013 at 02:35:33PM +0100, Steffen Trumtrar wrote:
> On Tue, Mar 19, 2013 at 08:29:54AM -0500, Josh Cartwright wrote:
> > On Tue, Mar 19, 2013 at 10:21:58AM +0100, Steffen Trumtrar wrote:
> > > This adds support for the clocktree on zynq7000 SoCs.
> > > The patch is based on clocks.c from the larger patch
> > > ARM: zynq: add suppport for Zynq 7000 SoC
> > > by Josh Cartwright.
> > >
> > > The driver in that patch is converted to a platform_driver and code to
> > > enable plls was added.
> > >
> > > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > > ---
> > [..]
> > > +
> > > +static int zynq_clock_probe(struct device_d *dev)
> > > +{
> > > + void __iomem *slcr_base;
> > > + unsigned long ps_clk_rate = 33333330;
> >
> > My version of the patchset had this ^ configurable, since it's possible
> > a different osc could be used on the board. Any reason why you've
> > hardcoded this instead?
> >
>
> Hm, not really any good reason. But the plan is to get this from the
> devicetree instead. I didn't get around to actually doing that.
> Do your boards have another osc or would a hardcoded value suffice for
> the moment?
I agree that we should be leveraging the device tree here, so maybe it's
worth dropping until we get sorted out. I'm fine with a hardcoded value
for now.
Josh
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 0/5] ARM: add support for Zynq
2013-03-19 12:59 ` [PATCH v2 0/5] ARM: add support for Zynq Josh Cartwright
@ 2013-03-19 13:57 ` Steffen Trumtrar
2013-03-19 15:08 ` Josh Cartwright
0 siblings, 1 reply; 21+ messages in thread
From: Steffen Trumtrar @ 2013-03-19 13:57 UTC (permalink / raw)
To: Josh Cartwright; +Cc: barebox
On Tue, Mar 19, 2013 at 07:59:27AM -0500, Josh Cartwright wrote:
> On Tue, Mar 19, 2013 at 10:21:55AM +0100, Steffen Trumtrar wrote:
> > Hi!
> >
> > Still nothing fancy. Boots a little faster from SD and has a console.
> > For ethernet the macb-driver works fine,
>
> I've also found the macb driver works, but it does require a change to
> prevent byteswapping during DMA, have you run into this on the ZedBoard?
> (patch below).
I already sent the same patch :-)
Xilinx decided to use a different reset default than Cadence uses.
>
> Also, have you thought about how you'll handle the OCM mapping? For my
> testing, I'm using a PBL image (which contains the lowlevel init), but I
> still need some hook into the decompressed image to remove the OCM
> mapping from the lower address space. This can't be done during the
> execution of the PBL image, since it's running from OCM.
>
> As far as I could tell, there was no good way to hook in early to the
> decompressed image.
>
> I ran into this trying to boot the 14.4 release uImage, since it has a
> load address of 0x8000, and spans the 'hole' at 0x30000 configured out
> of BootROM to be 'Reserved' (writes to here trigger a Data Abort).
>
You also need that for the mainline kernel. Or it won't even uncompress.
> > but needs to be "freed" from its at91 heritage (meaning: the struct
> > at91_ether_platform_data should be renamed first and defined someplace
> > else than a board.h)
>
> I'm assuming you've done this, but if not, I've made this change in my
> tree. For what it's worth, I went with 'struct macb_platform_data' and
> moved it into include/platform_data/macb.h.
>
Actually, I haven't. If you have a series that renames tree-wide please
post that.
> >
> > Changelog:
> > - addressed all comments by Sascha and Josh
> > (some uart stuff, defines, endianess, ...)
> > - squashed a little
> >
> > Regards,
> > Steffen
>
> -- 8< --
> Subject: [PATCH] macb: disable byte-order translation through DMA
>
> Packet data already exists in memory in network byte-order. Prevent the
> GEM from performing endianness translation through DMA.
>
> Signed-off-by: Josh Cartwright <joshc@eso.teric.us>
> ---
> drivers/net/macb.c | 1 +
> drivers/net/macb.h | 2 ++
> 2 files changed, 3 insertions(+)
>
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 14a0689..25d1b9f 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -307,6 +307,7 @@ static void macb_configure_dma(struct macb_device *bp)
> dmacfg |= GEM_BF(FBLDO, 16);
> dmacfg |= GEM_BIT(TXPBMS) | GEM_BF(RXBMS, -1L);
> dmacfg |= GEM_BIT(DDRP);
> + dmacfg &= ~GEM_BIT(ENDIAN);
> gem_writel(bp, DMACFG, dmacfg);
> }
> }
> diff --git a/drivers/net/macb.h b/drivers/net/macb.h
> index cadd561..fc4d1a9 100644
> --- a/drivers/net/macb.h
> +++ b/drivers/net/macb.h
> @@ -168,6 +168,8 @@
> /* Bitfields in DMACFG. */
> #define GEM_FBLDO_OFFSET 0
> #define GEM_FBLDO_SIZE 5
> +#define GEM_ENDIAN_OFFSET 7
> +#define GEM_ENDIAN_SIZE 1
> #define GEM_RXBMS_OFFSET 8
> #define GEM_RXBMS_SIZE 2
> #define GEM_TXPBMS_OFFSET 10
> --
> 1.8.1.5
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 0/5] ARM: add support for Zynq
2013-03-19 13:57 ` Steffen Trumtrar
@ 2013-03-19 15:08 ` Josh Cartwright
0 siblings, 0 replies; 21+ messages in thread
From: Josh Cartwright @ 2013-03-19 15:08 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On Tue, Mar 19, 2013 at 02:57:58PM +0100, Steffen Trumtrar wrote:
> On Tue, Mar 19, 2013 at 07:59:27AM -0500, Josh Cartwright wrote:
> > On Tue, Mar 19, 2013 at 10:21:55AM +0100, Steffen Trumtrar wrote:
> > > Hi!
> > >
> > > Still nothing fancy. Boots a little faster from SD and has a console.
> > > For ethernet the macb-driver works fine,
> >
> > I've also found the macb driver works, but it does require a change to
> > prevent byteswapping during DMA, have you run into this on the ZedBoard?
> > (patch below).
>
> I already sent the same patch :-)
> Xilinx decided to use a different reset default than Cadence uses.
So you did! Nearly identical, too :).
> > Also, have you thought about how you'll handle the OCM mapping? For my
> > testing, I'm using a PBL image (which contains the lowlevel init), but I
> > still need some hook into the decompressed image to remove the OCM
> > mapping from the lower address space. This can't be done during the
> > execution of the PBL image, since it's running from OCM.
> >
> > As far as I could tell, there was no good way to hook in early to the
> > decompressed image.
> >
> > I ran into this trying to boot the 14.4 release uImage, since it has a
> > load address of 0x8000, and spans the 'hole' at 0x30000 configured out
> > of BootROM to be 'Reserved' (writes to here trigger a Data Abort).
> >
>
> You also need that for the mainline kernel. Or it won't even uncompress.
I haven't yet got to the point that I can boot a kernel, but I just got
to the point where it will at least decompress last night.
> > > but needs to be "freed" from its at91 heritage (meaning: the struct
> > > at91_ether_platform_data should be renamed first and defined someplace
> > > else than a board.h)
> >
> > I'm assuming you've done this, but if not, I've made this change in my
> > tree. For what it's worth, I went with 'struct macb_platform_data' and
> > moved it into include/platform_data/macb.h.
> >
>
> Actually, I haven't. If you have a series that renames tree-wide please
> post that.
Okay, will do.
Josh
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 1/5] serial: Add driver for Cadence UART
2013-03-19 9:21 ` [PATCH v2 1/5] serial: Add driver for Cadence UART Steffen Trumtrar
@ 2013-03-19 15:22 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 0 replies; 21+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-03-19 15:22 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On 10:21 Tue 19 Mar , Steffen Trumtrar wrote:
> Support for Cadence UART core.
>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
> drivers/serial/Kconfig | 4 +
> drivers/serial/Makefile | 1 +
> drivers/serial/serial_cadence.c | 307 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 312 insertions(+)
> create mode 100644 drivers/serial/serial_cadence.c
>
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index f61d670..a51510e 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -113,4 +113,8 @@ config DRIVER_SERIAL_OMAP4_USBBOOT
> help
> Enable this to get console support over the usb bus used to boot an OMAP4
>
> +config DRIVER_SERIAL_CADENCE
> + default n
no need it's already n
> + bool "Cadence UART driver"
> +
> endmenu
> diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> index 893e282..963a7df 100644
> --- a/drivers/serial/Makefile
> +++ b/drivers/serial/Makefile
> @@ -21,3 +21,4 @@ obj-$(CONFIG_DRIVER_SERIAL_ALTERA) += serial_altera.o
> obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG) += serial_altera_jtag.o
> obj-$(CONFIG_DRIVER_SERIAL_PXA) += serial_pxa.o
> obj-$(CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT) += serial_omap4_usbboot.o
> +obj-$(CONFIG_DRIVER_SERIAL_CADENCE) += serial_cadence.o
> diff --git a/drivers/serial/serial_cadence.c b/drivers/serial/serial_cadence.c
> new file mode 100644
> index 0000000..c29c391
> --- /dev/null
> +++ b/drivers/serial/serial_cadence.c
> @@ -0,0 +1,307 @@
> +/*
> + * (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <common.h>
> +#include <driver.h>
> +#include <init.h>
> +#include <malloc.h>
> +#include <notifier.h>
> +#include <io.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +
> +#define CADENCE_UART_CONTROL 0x00
> +#define CADENCE_UART_MODE 0x04
> +#define CADENCE_UART_BAUD_GEN 0x18
> +#define CADENCE_UART_CHANNEL_STS 0x2C
> +#define CADENCE_UART_RXTXFIFO 0x30
> +#define CADENCE_UART_BAUD_DIV 0x34
> +
> +#define CADENCE_CTRL_RXRES (1 << 0)
> +#define CADENCE_CTRL_TXRES (1 << 1)
> +#define CADENCE_CTRL_RXEN (1 << 2)
> +#define CADENCE_CTRL_RXDIS (1 << 3)
> +#define CADENCE_CTRL_TXEN (1 << 4)
> +#define CADENCE_CTRL_TXDIS (1 << 5)
> +#define CADENCE_CTRL_RSTTO (1 << 6)
> +#define CADENCE_CTRL_STTBRK (1 << 7)
> +#define CADENCE_CTRL_STPBRK (1 << 8)
> +
> +#define CADENCE_MODE_CLK_REF (0 << 0)
> +#define CADENCE_MODE_CLK_REF_DIV (1 << 0)
> +#define CADENCE_MODE_CHRL_6 (3 << 1)
> +#define CADENCE_MODE_CHRL_7 (2 << 1)
> +#define CADENCE_MODE_CHRL_8 (0 << 1)
> +#define CADENCE_MODE_PAR_EVEN (0 << 3)
> +#define CADENCE_MODE_PAR_ODD (1 << 3)
> +#define CADENCE_MODE_PAR_SPACE (2 << 3)
> +#define CADENCE_MODE_PAR_MARK (3 << 3)
> +#define CADENCE_MODE_PAR_NONE (4 << 3)
> +
> +#define CADENCE_STS_REMPTY (1 << 1)
> +#define CADENCE_STS_RFUL (1 << 2)
> +#define CADENCE_STS_TEMPTY (1 << 3)
> +#define CADENCE_STS_TFUL (1 << 4)
move this to an include as we will use them for debug_ll
> +
> +/*
> + * create default values for different platforms
> + */
> +struct cadence_serial_devtype_data {
> + u32 ctrl;
> + u32 mode;
> +};
> +
> +static struct cadence_serial_devtype_data cadence_r1p08_data = {
> + .ctrl = CADENCE_CTRL_RXEN | CADENCE_CTRL_TXEN,
> + .mode = CADENCE_MODE_CLK_REF | CADENCE_MODE_CHRL_8 | CADENCE_MODE_PAR_NONE,
> +};
> +
> +struct cadence_serial_priv {
> + struct console_device cdev;
> + int baudrate;
> + struct notifier_block notify;
> + void __iomem *regs;
> + struct clk *clk;
> + struct cadence_serial_devtype_data *devtype;
> +};
> +
> +static int cadence_serial_reset(struct console_device *cdev)
> +{
> + struct cadence_serial_priv *priv = container_of(cdev,
> + struct cadence_serial_priv, cdev);
> +
> + /* Soft-Reset Tx/Rx paths */
> + writel(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES, priv->regs +
> + CADENCE_UART_CONTROL);
> +
> + while (readl(priv->regs + CADENCE_UART_CONTROL) &
> + (CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES))
> + ;
> +
> + return 0;
> +}
> +
> +static int cadence_serial_setbaudrate(struct console_device *cdev, int baudrate)
> +{
> + struct cadence_serial_priv *priv = container_of(cdev,
> + struct cadence_serial_priv, cdev);
> + unsigned int gen, div;
> + int calc_rate;
> + unsigned long clk;
> + int error;
> + int val;
> +
> + clk = clk_get_rate(priv->clk);
> + priv->baudrate = baudrate;
> +
> + /* disable transmitter and receiver */
> + val = readl(priv->regs + CADENCE_UART_CONTROL);
> + val &= ~CADENCE_CTRL_TXEN & ~CADENCE_CTRL_RXEN;
> + writel(val, priv->regs + CADENCE_UART_CONTROL);
> +
> + /*
> + * clk
> + * rate = -----------
> + * gen*(div+1)
> + */
> +
> + for (div = 4; div < 256; div++) {
> + gen = clk / (baudrate * (div + 1));
> +
> + if (gen < 1 || gen > 65535)
> + continue;
> +
> + calc_rate = clk / (gen * (div + 1));
> + error = baudrate - calc_rate;
> + if (error < 0)
> + error *= -1;
> + if (((error * 100) / baudrate) < 3)
> + break;
> + }
> +
> + writel(gen, priv->regs + CADENCE_UART_BAUD_GEN);
> + writel(div, priv->regs + CADENCE_UART_BAUD_DIV);
> +
> + /* Soft-Reset Tx/Rx paths */
> + writel(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES, priv->regs +
> + CADENCE_UART_CONTROL);
> +
> + while (readl(priv->regs + CADENCE_UART_CONTROL) &
> + (CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES))
> + ;
> +
> + /* Enable UART */
> + writel(priv->devtype->ctrl, priv->regs + CADENCE_UART_CONTROL);
> +
> + return 0;
> +}
> +
> +static int cadence_serial_init_port(struct console_device *cdev)
> +{
> + struct cadence_serial_priv *priv = container_of(cdev,
> + struct cadence_serial_priv, cdev);
> +
> + cadence_serial_reset(cdev);
> +
> + /* Enable UART */
> + writel(priv->devtype->ctrl, priv->regs + CADENCE_UART_CONTROL);
> + writel(priv->devtype->mode, priv->regs + CADENCE_UART_MODE);
> +
> + return 0;
> +}
> +
> +static void cadence_serial_putc(struct console_device *cdev, char c)
> +{
> + struct cadence_serial_priv *priv = container_of(cdev,
> + struct cadence_serial_priv, cdev);
> +
> + while ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
> + CADENCE_STS_TFUL) != 0)
> + ;
> +
> + writel(c, priv->regs + CADENCE_UART_RXTXFIFO);
> +}
> +
> +static int cadence_serial_tstc(struct console_device *cdev)
> +{
> + struct cadence_serial_priv *priv = container_of(cdev,
> + struct cadence_serial_priv, cdev);
> +
> + return ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
> + CADENCE_STS_REMPTY) == 0);
> +}
> +
> +static int cadence_serial_getc(struct console_device *cdev)
> +{
> + struct cadence_serial_priv *priv = container_of(cdev,
> + struct cadence_serial_priv, cdev);
> +
> + while (!cadence_serial_tstc(cdev))
> + ;
> +
> + return readl(priv->regs + CADENCE_UART_RXTXFIFO);
> +}
> +
> +static void cadence_serial_flush(struct console_device *cdev)
> +{
> + struct cadence_serial_priv *priv = container_of(cdev,
> + struct cadence_serial_priv, cdev);
> +
> + while ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
> + CADENCE_STS_TEMPTY) != 0)
> + ;
> +}
> +
> +static int cadence_clocksource_clock_change(struct notifier_block *nb,
> + unsigned long event, void *data)
> +{
> + struct cadence_serial_priv *priv = container_of(nb,
> + struct cadence_serial_priv, notify);
> +
> + cadence_serial_setbaudrate(&priv->cdev, priv->baudrate);
> +
> + return 0;
> +}
> +
> +static int cadence_serial_probe(struct device_d *dev)
> +{
> + struct console_device *cdev;
> + struct cadence_serial_priv *priv;
> + struct cadence_serial_devtype_data *devtype;
> + int ret;
> +
> + ret = dev_get_drvdata(dev, (unsigned long *)&devtype);
> + if (ret)
> + return ret;
> +
> + priv = xzalloc(sizeof(*priv));
> + priv->devtype = devtype;
> + cdev = &priv->cdev;
> + dev->priv = priv;
> +
> + priv->clk = clk_get(dev, NULL);
> + if (IS_ERR(priv->clk)) {
> + ret = -ENODEV;
> + goto err_free;
> + }
> +
> + if (devtype->mode & CADENCE_MODE_CLK_REF_DIV)
> + clk_set_rate(priv->clk, clk_get_rate(priv->clk) / 8);
> +
> + priv->regs = dev_request_mem_region(dev, 0);
> + if (!priv->regs) {
> + ret = -EBUSY;
> + goto err_free;
> + }
> +
> + cdev->dev = dev;
> + cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
> + cdev->tstc = cadence_serial_tstc;
> + cdev->putc = cadence_serial_putc;
> + cdev->getc = cadence_serial_getc;
> + cdev->flush = cadence_serial_flush;
> + cdev->setbrg = cadence_serial_setbaudrate;
> +
> + cadence_serial_init_port(cdev);
> +
> + console_register(cdev);
> + priv->notify.notifier_call = cadence_clocksource_clock_change;
> + clock_register_client(&priv->notify);
> +
> + return 0;
> +
> +err_free:
> + free(priv);
> + return ret;
> +}
> +
> +static void cadence_serial_remove(struct device_d *dev)
> +{
> + struct cadence_serial_priv *priv = dev->priv;
> +
> + console_unregister(&priv->cdev);
> + free(priv);
> +}
> +
> +static __maybe_unused struct of_device_id cadence_serial_dt_ids[] = {
> + {
> + .compatible = "xlnx,xuartps",
> + .data = (unsigned long)&cadence_r1p08_data,
> + }, {
> + /* sentinel */
> + }
> +};
> +
> +static struct platform_device_id cadence_serial_ids[] = {
> + {
> + .name = "cadence-uart",
> + .driver_data = (unsigned long)&cadence_r1p08_data,
> + }, {
> + /* sentinel */
> + },
> +};
> +
> +static struct driver_d cadence_serial_driver = {
> + .name = "cadence_serial",
> + .probe = cadence_serial_probe,
> + .remove = cadence_serial_remove,
don't do so
otherwise no uncompress in the kernel
> + .of_compatible = DRV_OF_COMPAT(cadence_serial_dt_ids),
> + .id_table = cadence_serial_ids,
> +};
> +
> +static int cadence_serial_init(void)
> +{
> + return platform_driver_register(&cadence_serial_driver);
> +}
> +console_initcall(cadence_serial_init);
> --
> 1.8.2.rc2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/5] ARM: zynq: Add new architecture zynq
2013-03-19 9:21 ` [PATCH v2 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
2013-03-19 13:05 ` Josh Cartwright
2013-03-19 13:18 ` Josh Cartwright
@ 2013-03-19 15:26 ` Jean-Christophe PLAGNIOL-VILLARD
2 siblings, 0 replies; 21+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-03-19 15:26 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On 10:21 Tue 19 Mar , Steffen Trumtrar wrote:
> Add basic support for the Xilinx Zynq-7000 EPP architecture.
> The Zynq-7000 is an embedded processing platform that combines a Cortex A9
> dualcore MPSoC with an Artix-7 FPGA.
>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
> arch/arm/Kconfig | 5 +
> arch/arm/Makefile | 2 +
> arch/arm/mach-zynq/Kconfig | 39 ++++++
> arch/arm/mach-zynq/Makefile | 1 +
> arch/arm/mach-zynq/devices.c | 14 +++
> arch/arm/mach-zynq/include/mach/barebox.lds.h | 9 ++
> arch/arm/mach-zynq/include/mach/debug_ll.h | 37 ++++++
> arch/arm/mach-zynq/include/mach/devices.h | 13 ++
> .../arm/mach-zynq/include/mach/zynq-flash-header.h | 40 +++++++
> arch/arm/mach-zynq/include/mach/zynq7000-regs.h | 132 +++++++++++++++++++++
> arch/arm/mach-zynq/zynq.c | 56 +++++++++
> include/asm-generic/barebox.lds.h | 3 +-
> 12 files changed, 350 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/mach-zynq/Kconfig
> create mode 100644 arch/arm/mach-zynq/Makefile
> create mode 100644 arch/arm/mach-zynq/devices.c
> create mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h
> create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h
> create mode 100644 arch/arm/mach-zynq/include/mach/devices.h
> create mode 100644 arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-regs.h
> create mode 100644 arch/arm/mach-zynq/zynq.c
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 28332ec..8431fa8 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -110,6 +110,10 @@ config ARCH_TEGRA
> select CPU_ARM926T
> select HAS_DEBUG_LL
>
> +config ARCH_ZYNQ
> + bool "Xilinx Zynq-based boards"
> + select HAS_DEBUG_LL
> +
> endchoice
>
> source arch/arm/cpu/Kconfig
> @@ -126,6 +130,7 @@ source arch/arm/mach-pxa/Kconfig
> source arch/arm/mach-samsung/Kconfig
> source arch/arm/mach-versatile/Kconfig
> source arch/arm/mach-tegra/Kconfig
> +source arch/arm/mach-zynq/Kconfig
>
> config ARM_ASM_UNIFIED
> bool
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index fcb2969..ceb45dc 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -64,6 +64,7 @@ machine-$(CONFIG_ARCH_PXA) := pxa
> machine-$(CONFIG_ARCH_SAMSUNG) := samsung
> machine-$(CONFIG_ARCH_VERSATILE) := versatile
> machine-$(CONFIG_ARCH_TEGRA) := tegra
> +machine-$(CONFIG_ARCH_ZYNQ) := zynq
>
> # Board directory name. This list is sorted alphanumerically
> # by CONFIG_* macro name.
> @@ -157,6 +158,7 @@ board-$(CONFIG_MACH_SABRELITE) := freescale-mx6-sabrelite
> board-$(CONFIG_MACH_TX53) := karo-tx53
> board-$(CONFIG_MACH_GUF_VINCELL) := guf-vincell
> board-$(CONFIG_MACH_EFIKA_MX_SMARTBOOK) := efika-mx-smartbook
> +board-$(CONFIG_MACH_ZEDBOARD) := avnet-zedboard
>
> machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
>
> diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
> new file mode 100644
> index 0000000..3965ad4
> --- /dev/null
> +++ b/arch/arm/mach-zynq/Kconfig
> @@ -0,0 +1,39 @@
> +if ARCH_ZYNQ
> +
> +config ARCH_TEXT_BASE
> + hex
> + default 0x1ff00000 if MACH_ZEDBOARD
> +
> +config ZYNQ_DEBUG_LL_UART_BASE
> + hex
> + default 0xe0001000 if MACH_ZEDBOARD
> +
> +config BOARDINFO
> + default "ZedBoard" if MACH_ZEDBOARD
> +
> +choice
> + prompt "Xilinx Zynq type board"
> +
> +config ARCH_ZYNQ7000
> + bool "Zynq-7000"
> + select CPU_V7
> + select DRIVER_SERIAL_CADENCE
don't force it we may want NO serial support
> + select CLKDEV_LOOKUP
> + select COMMON_CLK
> + select ARM_SMP_TWD
> +
> +endchoice
> +
> +if ARCH_ZYNQ7000
> +
> +choice
> + prompt "Zynq-7000 Board Type"
> +
> +config MACH_ZEDBOARD
> + bool "Avnet Zynq-7000 ZedBoard"
> + select MACH_HAS_LOWLEVEL_INIT
???
> +
> +endchoice
> +endif
> +
> +endif
> diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile
> new file mode 100644
> index 0000000..459c957
> --- /dev/null
> +++ b/arch/arm/mach-zynq/Makefile
> @@ -0,0 +1 @@
> +obj-y += zynq.o devices.o clk-zynq7000.o
> diff --git a/arch/arm/mach-zynq/devices.c b/arch/arm/mach-zynq/devices.c
> new file mode 100644
> index 0000000..2bb3c92
> --- /dev/null
> +++ b/arch/arm/mach-zynq/devices.c
> @@ -0,0 +1,14 @@
> +#include <common.h>
> +#include <driver.h>
> +#include <mach/devices.h>
> +
> +static inline struct device_d *zynq_add_device(char *name, int id, void *base, int size, void *pdata)
> +{
> + return add_generic_device(name, id, NULL, (resource_size_t)base, size,
> + IORESOURCE_MEM, pdata);
> +}
drop it useless
> +
> +struct device_d *zynq_add_uart(void *base, int id)
> +{
> + return zynq_add_device("cadence-uart", id, base, 0x1000, NULL);
> +}
> diff --git a/arch/arm/mach-zynq/include/mach/barebox.lds.h b/arch/arm/mach-zynq/include/mach/barebox.lds.h
> new file mode 100644
> index 0000000..674a4ac
> --- /dev/null
> +++ b/arch/arm/mach-zynq/include/mach/barebox.lds.h
> @@ -0,0 +1,9 @@
> +#define PRE_IMAGE \
> + .pre_image : { \
> + KEEP(*(.flash_header_start*)) \
> + . = 0x20; \
> + KEEP(*(.flash_header_0x0*)) \
> + . = 0xa0; \
> + KEEP(*(.ps7reg_entry_0x0A0)) \
> + . = 0x8c0; \
> + }
> diff --git a/arch/arm/mach-zynq/include/mach/debug_ll.h b/arch/arm/mach-zynq/include/mach/debug_ll.h
> new file mode 100644
> index 0000000..478a9f0
> --- /dev/null
> +++ b/arch/arm/mach-zynq/include/mach/debug_ll.h
> @@ -0,0 +1,37 @@
> +/*
> + * based on mach-imx/include/mach/debug_ll.h
> + */
> +
> +#ifndef __MACH_DEBUG_LL_H__
> +#define __MACH_DEBUG_LL_H__
> +
> +#include <io.h>
> +#include <mach/zynq7000-regs.h>
> +
> +#ifndef CONFIG_ZYNQ_DEBUG_LL_UART_BASE
> +#warning define ZYNQ_DEBUG_LL_UART_BASE properly for debug_ll
> +#define ZYNQ_DEBUG_LL_UART_BASE ZYNQ_UART1_BASE_ADDR
> +#else
> +#define ZYNQ_DEBUG_LL_UART_BASE CONFIG_ZYNQ_DEBUG_LL_UART_BASE
> +#endif
> +
> +#define ZYNQ_UART_RXTXFIFO 0x30
> +#define ZYNQ_UART_CHANNEL_STS 0x2C
> +
> +#define ZYNQ_UART_STS_TFUL (1 << 4)
> +#define ZYNQ_UART_TXDIS (1 << 5)
> +
> +static inline void PUTC_LL(int c)
> +{
> + void __iomem *base = (void *)ZYNQ_DEBUG_LL_UART_BASE;
IOMEM()
> +
> + if (readl(base) & ZYNQ_UART_TXDIS)
> + return;
> +
> + while ((readl(base + ZYNQ_UART_CHANNEL_STS) & ZYNQ_UART_STS_TFUL) != 0)
> + ;
> +
> + writel(c, base + ZYNQ_UART_RXTXFIFO);
> +}
> +
> +#endif
> diff --git a/arch/arm/mach-zynq/include/mach/devices.h b/arch/arm/mach-zynq/include/mach/devices.h
> new file mode 100644
> index 0000000..7085aeb
> --- /dev/null
> +++ b/arch/arm/mach-zynq/include/mach/devices.h
> @@ -0,0 +1,13 @@
> +#include <mach/zynq7000-regs.h>
> +
> +struct device_d *zynq_add_uart(void *base, int id);
no we use resource_size_t use it here too
> +
> +static inline struct device_d *zynq_add_uart0(void)
> +{
> + return zynq_add_uart((void *)ZYNQ_UART0_BASE_ADDR, 0);
> +}
> +
> +static inline struct device_d *zynq_add_uart1(void)
> +{
> + return zynq_add_uart((void *)ZYNQ_UART1_BASE_ADDR, 1);
> +}
> diff --git a/arch/arm/mach-zynq/include/mach/zynq-flash-header.h b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> new file mode 100644
> index 0000000..a0251cb
> --- /dev/null
> +++ b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> @@ -0,0 +1,40 @@
> +#ifndef __MACH_FLASH_HEADER_H
> +#define __MACH_FLASH_HEADER_H
> +
> +#include <asm-generic/sections.h>
> +
> +#define __flash_header_start __section(.flash_header_start)
> +
> +#define __flash_header_section __section(.flash_header_0x0)
> +#define __ps7reg_entry_section __section(.ps7reg_entry_0x0A0)
> +#define __image_len_section __section(.image_len_0x08c0)
> +#define FLASH_HEADER_OFFSET 0x0
> +#define IMAGE_OFFSET 0x8c0
> +
> +#define DEST_BASE 0x8c0
> +#define FLASH_HEADER_BASE (DEST_BASE + FLASH_HEADER_OFFSET)
> +
> +struct zynq_reg_entry {
> + __le32 addr;
> + __le32 val;
> +};
> +
> +#define WIDTH_DETECTION_MAGIC 0xAA995566
> +#define IMAGE_IDENTIFICATION 0x584C4E58 /* "XLNX" */
> +
> +struct zynq_flash_header {
> + uint32_t width_det;
> + uint32_t image_id;
> + uint32_t enc_stat;
> + uint32_t user;
> + uint32_t flash_offset;
> + uint32_t length;
> + uint32_t res0;
> + uint32_t start_of_exec;
> + uint32_t total_len;
> + uint32_t res1;
> + uint32_t checksum;
> + uint32_t res2;
> +};
> +
> +#endif /* __MACH_FLASH_HEADER_H */
> diff --git a/arch/arm/mach-zynq/include/mach/zynq7000-regs.h b/arch/arm/mach-zynq/include/mach/zynq7000-regs.h
> new file mode 100644
> index 0000000..f5ccbb0
> --- /dev/null
> +++ b/arch/arm/mach-zynq/include/mach/zynq7000-regs.h
> @@ -0,0 +1,132 @@
> +/*
> + * (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#define ZYNQ_UART0_BASE_ADDR 0xE0000000
> +#define ZYNQ_UART1_BASE_ADDR 0xE0001000
> +#define ZYNQ_I2C0_BASE_ADDR 0xE0004000
> +#define ZYNQ_I2C1_BASE_ADDR 0xE0005000
> +#define ZYNQ_SPI0_BASE_ADDR 0xE0006000
> +#define ZYNQ_SPI1_BASE_ADDR 0xE0007000
> +#define ZYNQ_CAN0_BASE_ADDR 0xE0008000
> +#define ZYNQ_CAN1_BASE_ADDR 0xE0009000
> +#define ZYNQ_GPIO_BASE_ADDR 0xE000A000
> +
> +#define ZYNQ_SLCR_BASE 0xF8000000
> +#define ZYNQ_SLCR_SCL (ZYNQ_SLCR_BASE + 0x000)
> +#define ZYNQ_SLCR_LOCK (ZYNQ_SLCR_BASE + 0x004)
> +#define ZYNQ_SLCR_UNLOCK (ZYNQ_SLCR_BASE + 0x008)
> +#define ZYNQ_SLCR_LOCKSTA (ZYNQ_SLCR_BASE + 0x00C)
> +#define ZYNQ_CLOCK_CTRL_BASE (ZYNQ_SLCR_BASE + 0x100)
> +#define ZYNQ_ARM_PLL_CTRL 0x000
> +#define ZYNQ_DDR_PLL_CTRL 0x004
> +#define ZYNQ_IO_PLL_CTRL 0x008
> +#define ZYNQ_PLL_STATUS 0x00C
> +#define ZYNQ_ARM_PLL_CFG 0x010
> +#define ZYNQ_DDR_PLL_CFG 0x014
> +#define ZYNQ_IO_PLL_CFG 0x018
> +#define ZYNQ_ARM_CLK_CTRL 0x020
> +#define ZYNQ_DDR_CLK_CTRL 0x024
> +#define ZYNQ_DCI_CLK_CTRL 0x028
> +#define ZYNQ_APER_CLK_CTRL 0x02C
> +#define ZYNQ_USB0_CLK_CTRL 0x030
> +#define ZYNQ_USB1_CLK_CTRL 0x034
> +#define ZYNQ_GEM0_RCLK_CTRL 0x038
> +#define ZYNQ_GEM1_RCLK_CTRL 0x03C
> +#define ZYNQ_GEM0_CLK_CTRL 0x040
> +#define ZYNQ_GEM1_CLK_CTRL 0x044
> +#define ZYNQ_SMC_CLK_CTRL 0x048
> +#define ZYNQ_LQSPI_CLK_CTRL 0x04C
> +#define ZYNQ_SDIO_CLK_CTRL 0x050
> +#define ZYNQ_UART_CLK_CTRL 0x054
> +#define ZYNQ_SPI_CLK_CTRL 0x058
> +#define ZYNQ_CAN_CLK_CTRL 0x05C
> +#define ZYNQ_CAN_MIOCLK_CTRL 0x060
> +#define ZYNQ_DBG_CLK_CTRL 0x064
> +#define ZYNQ_PCAP_CLK_CTRL 0x068
> +#define ZYNQ_TOPSW_CLK_CTRL 0x06C
> +#define ZYNQ_FPGA0_CLK_CTRL 0x070
> +#define ZYNQ_FPGA1_CLK_CTRL 0x080
> +#define ZYNQ_FPGA2_CLK_CTRL 0x090
> +#define ZYNQ_FPGA3_CLK_CTRL 0x0A0
> +#define ZYNQ_CLK_621_TRUE 0x0C4
> +#define ZYNQ_RST_CTRL_BASE (ZYNQ_SLCR_BASE + 0x200)
> +#define ZYNQ_PSS_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x000)
> +#define ZYNQ_DDR_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x004)
> +#define ZYNQ_TOPSW_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x008)
> +#define ZYNQ_DMAC_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x00C)
> +#define ZYNQ_USB_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x010)
> +#define ZYNQ_GEM_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x014)
> +#define ZYNQ_SDIO_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x018)
> +#define ZYNQ_SPI_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x01C)
> +#define ZYNQ_CAN_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x020)
> +#define ZYNQ_I2C_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x024)
> +#define ZYNQ_UART_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x028)
> +#define ZYNQ_GPIO_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x02C)
> +#define ZYNQ_LQSPI_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x030)
> +#define ZYNQ_SMC_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x034)
> +#define ZYNQ_OCM_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x038)
> +#define ZYNQ_DEVCI_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x03C)
> +#define ZYNQ_FPGA_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x040)
> +#define ZYNQ_A9_CPU_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x044)
> +#define ZYNQ_RS_AWDT_CTRL (ZYNQ_RST_CTRL_BASE + 0x04C)
> +#define ZYNQ_REBOOT_STATUS (ZYNQ_SLCR_BASE + 0x258)
> +#define ZYNQ_BOOT_MODE (ZYNQ_SLCR_BASE + 0x25C)
> +#define ZYNQ_APU_CTRL (ZYNQ_SLCR_BASE + 0x300)
> +#define ZYNQ_WDT_CLK_SEL (ZYNQ_SLCR_BASE + 0x304)
> +#define ZYNQ_PSS_IDCODE (ZYNQ_SLCR_BASE + 0x530)
> +#define ZYNQ_DDR_URGENT (ZYNQ_SLCR_BASE + 0x600)
> +#define ZYNQ_DDR_CAL_START (ZYNQ_SLCR_BASE + 0x60C)
> +#define ZYNQ_DDR_REF_START (ZYNQ_SLCR_BASE + 0x614)
> +#define ZYNQ_DDR_CMD_STA (ZYNQ_SLCR_BASE + 0x618)
> +#define ZYNQ_DDR_URGENT_SEL (ZYNQ_SLCR_BASE + 0x61C)
> +#define ZYNQ_DDR_DFI_STATUS (ZYNQ_SLCR_BASE + 0x620)
> +#define ZYNQ_MIO_BASE (ZYNQ_SLCR_BASE + 0x700)
> +#define ZYNQ_MIO_LOOPBACK (ZYNQ_MIO_BASE + 0x104)
> +#define ZYNQ_MIO_MST_TRI0 (ZYNQ_MIO_BASE + 0x10C)
> +#define ZYNQ_MIO_MST_TRI1 (ZYNQ_MIO_BASE + 0x110)
> +#define ZYNQ_SD0_WP_SEL (ZYNQ_SLCR_BASE + 0x830)
> +#define ZYNQ_SD1_WP_SEL (ZYNQ_SLCR_BASE + 0x834)
> +#define ZYNQ_LVL_SHIFTR_EN (ZYNQ_SLCR_BASE + 0x900)
> +#define ZYNQ_OCM_CFG (ZYNQ_SLCR_BASE + 0x910)
> +#define ZYNQ_GPIOB_BASE (ZYNQ_SLCR_BASE + 0xB00)
> +#define ZYNQ_GPIOB_CTRL (ZYNQ_GPIOB_BASE + 0x000)
> +#define ZYNQ_GPIOB_CFG_CMOS18 (ZYNQ_GPIOB_BASE + 0x004)
> +#define ZYNQ_GPIOB_CFG_CMOS25 (ZYNQ_GPIOB_BASE + 0x008)
> +#define ZYNQ_GPIOB_CFG_CMOS33 (ZYNQ_GPIOB_BASE + 0x00C)
> +#define ZYNQ_GPIOB_CFG_LVTTL (ZYNQ_GPIOB_BASE + 0x010)
> +#define ZYNQ_GPIOB_CFG_HSTL (ZYNQ_GPIOB_BASE + 0x014)
> +#define ZYNQ_GPIOB_DRV_BIAS_CTRL (ZYNQ_GPIOB_BASE + 0x018)
> +#define ZYNQ_DDRIOB_BASE (ZYNQ_SLCR_BASE + 0xB40)
> +#define ZYNQ_DDRIOB_ADDR0 (ZYNQ_DDRIOB_BASE + 0x000)
> +#define ZYNQ_DDRIOB_ADDR1 (ZYNQ_DDRIOB_BASE + 0x004)
> +#define ZYNQ_DDRIOB_DATA0 (ZYNQ_DDRIOB_BASE + 0x008)
> +#define ZYNQ_DDRIOB_DATA1 (ZYNQ_DDRIOB_BASE + 0x00C)
> +#define ZYNQ_DDRIOB_DIFF0 (ZYNQ_DDRIOB_BASE + 0x010)
> +#define ZYNQ_DDRIOB_DIFF1 (ZYNQ_DDRIOB_BASE + 0x014)
> +#define ZYNQ_DDRIOB_CLOCK (ZYNQ_DDRIOB_BASE + 0x018)
> +#define ZYNQ_DDRIOB_DRIVE_SLEW_ADDR (ZYNQ_DDRIOB_BASE + 0x01C)
> +#define ZYNQ_DDRIOB_DRIVE_SLEW_DATA (ZYNQ_DDRIOB_BASE + 0x020)
> +#define ZYNQ_DDRIOB_DRIVE_SLEW_DIFF (ZYNQ_DDRIOB_BASE + 0x024)
> +#define ZYNQ_DDRIOB_DRIVE_SLEW_CLOCK (ZYNQ_DDRIOB_BASE + 0x028)
> +#define ZYNQ_DDRIOB_DDR_CTRL (ZYNQ_DDRIOB_BASE + 0x02C)
> +#define ZYNQ_DDRIOB_DCI_CTRL (ZYNQ_DDRIOB_BASE + 0x030)
> +#define ZYNQ_DDRIOB_DCI_STATUS (ZYNQ_DDRIOB_BASE + 0x034)
> +
> +#define ZYNQ_TTC0_BASE_ADDR 0xF8001000
> +#define ZYNQ_TTC1_BASE_ADDR 0xF8002000
> +
> +#define ZYNQ_DDRC_BASE 0xF8006000
> +
> +#define CORTEXA9_SCU_TIMER_BASE_ADDR 0xF8F00600
> diff --git a/arch/arm/mach-zynq/zynq.c b/arch/arm/mach-zynq/zynq.c
> new file mode 100644
> index 0000000..bd29e13
> --- /dev/null
> +++ b/arch/arm/mach-zynq/zynq.c
> @@ -0,0 +1,56 @@
> +/*
> + * (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <asm/system.h>
> +#include <asm-generic/io.h>
> +#include <common.h>
> +#include <init.h>
> +#include <mach/zynq7000-regs.h>
> +
> +static int zynq_init(void)
> +{
> + u32 val;
> +
> + dsb();
> + isb();
> + writel(0xDF0D, ZYNQ_SLCR_UNLOCK);
> + /* remap ocm high */
> + writel(0x0000000F, 0xf8000910);
> + /* mpcore.filtering_start_address */
> + writel(0x00000000, 0xf8f00040);
> + /* mpcore.filtering_end_address */
> + writel(0xffe00000, 0xf8f00044);
> + val = readl(0xf8f00000);
> + val |= 0x2;
> + writel(val, 0xf8f00000);
> + dmb();
please avoir those magic
> +
> + add_generic_device("zynq-clock", 0, NULL, ZYNQ_SLCR_BASE, 0x4000, IORESOURCE_MEM, NULL);
> + add_generic_device("smp_twd", 0, NULL, CORTEXA9_SCU_TIMER_BASE_ADDR,
> + 0x4000, IORESOURCE_MEM, NULL);
> + return 0;
> +}
> +postcore_initcall(zynq_init);
> +
> +void __noreturn reset_cpu(unsigned long addr)
> +{
> + /* write unlock key to slcr */
> + writel(0xDF0D, ZYNQ_SLCR_UNLOCK);
> + /* reset */
> + writel(0x1, ZYNQ_PSS_RST_CTRL);
> +
> + while (1)
> + ;
> +}
> diff --git a/include/asm-generic/barebox.lds.h b/include/asm-generic/barebox.lds.h
> index b2bd19e..0b98c96 100644
> --- a/include/asm-generic/barebox.lds.h
> +++ b/include/asm-generic/barebox.lds.h
> @@ -5,7 +5,8 @@
> defined CONFIG_ARCH_IMX53 || \
> defined CONFIG_ARCH_IMX6 || \
> defined CONFIG_X86 || \
> - defined CONFIG_ARCH_EP93XX
> + defined CONFIG_ARCH_EP93XX || \
> + defined CONFIG_ARCH_ZYNQ
we need to drop it and use a proper Kconfig
> #include <mach/barebox.lds.h>
> #endif
>
> --
> 1.8.2.rc2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard
2013-03-19 9:22 ` [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard Steffen Trumtrar
2013-03-19 13:40 ` Josh Cartwright
@ 2013-03-19 15:28 ` Jean-Christophe PLAGNIOL-VILLARD
1 sibling, 0 replies; 21+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-03-19 15:28 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On 10:22 Tue 19 Mar , Steffen Trumtrar wrote:
> The Avnet ZedBoard is an evalboard with a Zynq-7020 based MPSoC.
> There is also a Digilent ZedBoard, that is the same but only for
> academic customers.
>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
> arch/arm/boards/avnet-zedboard/Makefile | 1 +
> arch/arm/boards/avnet-zedboard/board.c | 38 ++++
> arch/arm/boards/avnet-zedboard/config.h | 4 +
> .../boards/avnet-zedboard/env/init/config-board | 7 +
> arch/arm/boards/avnet-zedboard/flash_header.c | 76 +++++++
> arch/arm/boards/avnet-zedboard/lowlevel.c | 252 +++++++++++++++++++++
> arch/arm/configs/zedboard_defconfig | 45 ++++
> 7 files changed, 423 insertions(+)
> create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
> create mode 100644 arch/arm/boards/avnet-zedboard/board.c
> create mode 100644 arch/arm/boards/avnet-zedboard/config.h
> create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
> create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
> create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
> create mode 100644 arch/arm/configs/zedboard_defconfig
>
> diff --git a/arch/arm/boards/avnet-zedboard/Makefile b/arch/arm/boards/avnet-zedboard/Makefile
> new file mode 100644
> index 0000000..5c05544
> --- /dev/null
> +++ b/arch/arm/boards/avnet-zedboard/Makefile
> @@ -0,0 +1 @@
> +obj-y += board.o lowlevel.o flash_header.o
> diff --git a/arch/arm/boards/avnet-zedboard/board.c b/arch/arm/boards/avnet-zedboard/board.c
> new file mode 100644
> index 0000000..4e3d5a5
> --- /dev/null
> +++ b/arch/arm/boards/avnet-zedboard/board.c
> @@ -0,0 +1,38 @@
> +/*
> + * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <asm/armlinux.h>
> +#include <common.h>
> +#include <environment.h>
> +#include <generated/mach-types.h>
> +#include <init.h>
> +#include <mach/devices.h>
> +#include <mach/zynq7000-regs.h>
> +#include <sizes.h>
> +
> +static int zedboard_mem_init(void)
> +{
> + arm_add_mem_device("ram0", 0, SZ_512M);
> +
> + return 0;
> +}
> +mem_initcall(zedboard_mem_init);
> +
> +static int zedboard_console_init(void)
> +{
> + zynq_add_uart1();
> +
> + return 0;
> +}
> +console_initcall(zedboard_console_init);
> diff --git a/arch/arm/boards/avnet-zedboard/config.h b/arch/arm/boards/avnet-zedboard/config.h
> new file mode 100644
> index 0000000..ca15136
> --- /dev/null
> +++ b/arch/arm/boards/avnet-zedboard/config.h
> @@ -0,0 +1,4 @@
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#endif /* __CONFIG_H */
> diff --git a/arch/arm/boards/avnet-zedboard/env/init/config-board b/arch/arm/boards/avnet-zedboard/env/init/config-board
> new file mode 100644
> index 0000000..9957653
> --- /dev/null
> +++ b/arch/arm/boards/avnet-zedboard/env/init/config-board
> @@ -0,0 +1,7 @@
> +#!/bin/sh
> +
> +# board defaults, do not change in running system. Change /env/config
> +# instead
> +
> +global.hostname=ZedBoard
> +global.linux.bootargs.base="console=ttyPS1,115200"
> diff --git a/arch/arm/boards/avnet-zedboard/flash_header.c b/arch/arm/boards/avnet-zedboard/flash_header.c
> new file mode 100644
> index 0000000..e7e2f8d
> --- /dev/null
> +++ b/arch/arm/boards/avnet-zedboard/flash_header.c
> @@ -0,0 +1,76 @@
> +/*
> + * Copyright (C) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <common.h>
> +#include <asm/byteorder.h>
> +#include <mach/zynq-flash-header.h>
> +#include <mach/zynq7000-regs.h>
> +#include <asm/barebox-arm-head.h>
> +
> +void __naked __flash_header_start go(void)
> +{
> + __asm__ __volatile__ (
> + "b barebox_arm_reset_vector\n"
> + "1: b 1b\n"
> + "1: b 1b\n"
> + "1: b 1b\n"
> + "1: b 1b\n"
> + "1: b 1b\n"
> + "1: b 1b\n"
> + "1: b 1b\n"
> + );
> +}
> +
> +#define REG(a, v) { .addr = cpu_to_le32(a), .val = cpu_to_le32(v), }
> +
> +struct zynq_reg_entry __ps7reg_entry_section reg_entry[] = {
> + REG(ZYNQ_SLCR_UNLOCK, 0x0000DF0D),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_CLK_621_TRUE, 0x00000001),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_APER_CLK_CTRL, 0x01FC044D),
> +
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028008),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CFG, 0x000FA220),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028010),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028011),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028010),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028000),
> +
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E008),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CFG, 0x001452C0),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E010),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E011),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E010),
> + REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E000),
> +
> + REG(0xf8000150, 0x00000a03),
> +
> + /* stop */
> + REG(0xFFFFFFFF, 0x00000000),
> +};
> +
> +struct zynq_flash_header __flash_header_section flash_header = {
> + .width_det = WIDTH_DETECTION_MAGIC,
> + .image_id = IMAGE_IDENTIFICATION,
> + .enc_stat = 0x0,
> + .user = 0x0,
> + .flash_offset = 0x8c0,
> + .length = barebox_image_size,
> + .res0 = 0x0,
> + .start_of_exec = 0x0,
> + .total_len = barebox_image_size,
> + .res1 = 0x1,
> + .checksum = 0x0,
> + .res2 = 0x0,
> +};
> diff --git a/arch/arm/boards/avnet-zedboard/lowlevel.c b/arch/arm/boards/avnet-zedboard/lowlevel.c
> new file mode 100644
> index 0000000..b50886e
> --- /dev/null
> +++ b/arch/arm/boards/avnet-zedboard/lowlevel.c
> @@ -0,0 +1,252 @@
> +/*
> + *
> + * (c) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <common.h>
> +#include <io.h>
> +#include <asm/barebox-arm.h>
> +#include <asm/barebox-arm-head.h>
> +#include <mach/zynq7000-regs.h>
> +
> +#define DCI_DONE (1 << 13)
> +#define PLL_ARM_LOCK (1 << 0)
> +#define PLL_DDR_LOCK (1 << 1)
> +#define PLL_IO_LOCK (1 << 2)
> +
> +void __naked barebox_arm_reset_vector(void)
> +{
> + /* open sesame */
> + writel(0x0000DF0D, ZYNQ_SLCR_UNLOCK);
> +
> + /* turn on LD9 */
> + writel(0x00000200, 0xF800071C);
> + writel(0x00000080, 0xE000A204);
> + writel(0x00000080, 0xE000A000);
> +
> + /* ps7_clock_init_data */
> + writel(0x1F000200, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_CLK_CTRL);
> + writel(0x00F00701, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DCI_CLK_CTRL);
> + writel(0x00002803, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_UART_CLK_CTRL);
> + writel(0x00000A03, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DBG_CLK_CTRL);
> + writel(0x00000501, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PCAP_CLK_CTRL);
> + writel(0x00000000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_TOPSW_CLK_CTRL);
> + writel(0x00100A00, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA0_CLK_CTRL);
> + writel(0x00100700, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA1_CLK_CTRL);
> + writel(0x00101400, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA2_CLK_CTRL);
> + writel(0x00101400, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA3_CLK_CTRL);
> + /* 6:2:1 mode */
> + writel(0x00000001, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_CLK_621_TRUE);
> + writel(0x01FC044D, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_APER_CLK_CTRL);
> +
> + /* configure the PLLs */
> + /* ARM PLL */
> + writel(0x00028008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> + writel(0x000FA220, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CFG);
> + writel(0x00028010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> + writel(0x00028011, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> + writel(0x00028010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> +
> + while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_ARM_LOCK))
> + ;
> + writel(0x00028000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
> +
> + /* DDR PLL */
> + /* set to bypass mode */
> + writel(0x0001A018, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> + /* assert reset */
> + writel(0x0001A019, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> + /* set feedback divs */
> + writel(0x00020019, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> + writel(0x0012C220, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CFG);
> + /* set ddr2xclk and ddr3xclk: 3,2 */
> + writel(0x0C200003, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_CLK_CTRL);
> + /* deassert reset */
> + writel(0x00020018, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> + /* wait pll lock */
> + while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_DDR_LOCK))
> + ;
> + /* remove bypass mode */
> + writel(0x00020008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
> +
> + /* IO PLL */
> + writel(0x0001E008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> + writel(0x001452C0, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CFG);
> + writel(0x0001E010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> + writel(0x0001E011, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> + writel(0x0001E010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> +
> + while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_IO_LOCK))
> + ;
> + writel(0x0001E000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
> +
> + /*
> + * INP_TYPE[1:2] = {off, vref, diff, lvcmos}
> + * DCI_UPDATE[3], TERM_EN[4]
> + * DCI_TYPE[5:6] = {off, drive, res, term}
> + * IBUF_DISABLE_MODE[7] = {ibuf, ibuf_disable}
> + * TERM_DISABLE_MODE[8] = {always, dynamic}
> + * OUTPUT_EN[9:10] = {ibuf, res, res, obuf}
> + * PULLUP_EN[11]
> + */
> + writel(0x00000600, ZYNQ_DDRIOB_ADDR0);
> + writel(0x00000600, ZYNQ_DDRIOB_ADDR1);
> + writel(0x00000672, ZYNQ_DDRIOB_DATA0);
> + writel(0x00000672, ZYNQ_DDRIOB_DATA1);
> + writel(0x00000674, ZYNQ_DDRIOB_DIFF0);
> + writel(0x00000674, ZYNQ_DDRIOB_DIFF1);
> + writel(0x00000600, ZYNQ_DDRIOB_CLOCK);
> + /*
> + * Drive_P[0:6], Drive_N[7:13]
> + * Slew_P[14:18], Slew_N[19:23]
> + * GTL[24:26], RTerm[27:31]
> + */
> + writel(0x00D6861C, ZYNQ_DDRIOB_DRIVE_SLEW_ADDR);
> + writel(0x00F9861C, ZYNQ_DDRIOB_DRIVE_SLEW_DATA);
> + writel(0x00F9861C, ZYNQ_DDRIOB_DRIVE_SLEW_DIFF);
> + writel(0x00D6861C, ZYNQ_DDRIOB_DRIVE_SLEW_CLOCK);
> + /*
> + * VREF_INT_EN[0]
> + * VREF_SEL[1:4] = {0001=0.6V, 0100=0.75V, 1000=0.9V}
> + * VREF_EXT_EN[5:6] = {dis/dis, dis/en, en/dis, en/en}
> + * RES[7:8], REFIO_EN[9]
> + */
> + /* FIXME: Xilinx sets this to internal, but Zedboard should support
> + external VRef, too */
> + writel(0x00000E09, ZYNQ_DDRIOB_DDR_CTRL);
> + /*
> + * RESET[0], ENABLE[1]
> + * NREF_OPT1[6:7], NREF_OPT2[8:10], NREF_OPT4[11:13]
> + * PREF_OPT1[14:15], PREF_OPT2[17:19], UPDATE_CONTROL[20]
> + */
> + writel(0x00000021, ZYNQ_DDRIOB_DCI_CTRL);
> + writel(0x00000020, ZYNQ_DDRIOB_DCI_CTRL);
> + writel(0x00100823, ZYNQ_DDRIOB_DCI_CTRL);
> +
> + while (!(readl(ZYNQ_DDRIOB_DCI_STATUS) & DCI_DONE))
> + ;
> +
> + writel(0x0E00E07F, 0xF8007000);
> +
> + /* ps7_ddr_init_data */
> + writel(0x00000080, 0XF8006000);
> + writel(0x00081081, 0XF8006004);
> + writel(0x03C0780F, 0XF8006008);
> + writel(0x02001001, 0XF800600C);
> + writel(0x00014001, 0XF8006010);
> + writel(0x0004159B, 0XF8006014);
> + writel(0x452460D2, 0XF8006018);
> + writel(0x720238E5, 0XF800601C);
> + writel(0x272872D0, 0XF8006020);
> + writel(0x0000003C, 0XF8006024);
> + writel(0x00002007, 0XF8006028);
> + writel(0x00000008, 0XF800602C);
> + writel(0x00040930, 0XF8006030);
> + writel(0x00010694, 0XF8006034);
> + writel(0x00000000, 0XF8006038);
> + writel(0x00000777, 0XF800603C);
> + writel(0xFFF00000, 0XF8006040);
> + writel(0x0FF66666, 0XF8006044);
> + writel(0x0003C248, 0XF8006048);
> + writel(0x77010800, 0XF8006050);
> + writel(0x00000101, 0XF8006058);
> + writel(0x00005003, 0XF800605C);
> + writel(0x0000003E, 0XF8006060);
> + writel(0x00020000, 0XF8006064);
> + writel(0x00284141, 0XF8006068);
> + writel(0x00001610, 0XF800606C);
> + writel(0x00008000, 0XF80060A0);
> + writel(0x10200802, 0XF80060A4);
> + writel(0x0690CB73, 0XF80060A8);
> + writel(0x000001FE, 0XF80060AC);
> + writel(0x1CFFFFFF, 0XF80060B0);
> + writel(0x00000200, 0XF80060B4);
> + writel(0x00200066, 0XF80060B8);
> + writel(0x00000000, 0XF80060BC);
> + writel(0x00000000, 0XF80060C4);
> + writel(0x00000000, 0XF80060C8);
> + writel(0x00000000, 0XF80060DC);
> + writel(0x00000000, 0XF80060F0);
> + writel(0x00000008, 0XF80060F4);
> + writel(0x00000000, 0XF8006114);
> + writel(0x40000001, 0XF8006118);
> + writel(0x40000001, 0XF800611C);
> + writel(0x40000001, 0XF8006120);
> + writel(0x40000001, 0XF8006124);
> + writel(0x00033C03, 0XF800612C);
> + writel(0x00034003, 0XF8006130);
> + writel(0x0002F400, 0XF8006134);
> + writel(0x00030400, 0XF8006138);
> + writel(0x00000035, 0XF8006140);
> + writel(0x00000035, 0XF8006144);
> + writel(0x00000035, 0XF8006148);
> + writel(0x00000035, 0XF800614C);
> + writel(0x00000083, 0XF8006154);
> + writel(0x00000083, 0XF8006158);
> + writel(0x0000007F, 0XF800615C);
> + writel(0x00000078, 0XF8006160);
> + writel(0x00000124, 0XF8006168);
> + writel(0x00000125, 0XF800616C);
> + writel(0x00000112, 0XF8006170);
> + writel(0x00000116, 0XF8006174);
> + writel(0x000000C3, 0XF800617C);
> + writel(0x000000C3, 0XF8006180);
> + writel(0x000000BF, 0XF8006184);
> + writel(0x000000B8, 0XF8006188);
> + writel(0x10040080, 0XF8006190);
> + writel(0x0001FC82, 0XF8006194);
> + writel(0x00000000, 0XF8006204);
> + writel(0x000803FF, 0XF8006208);
> + writel(0x000803FF, 0XF800620C);
> + writel(0x000803FF, 0XF8006210);
> + writel(0x000803FF, 0XF8006214);
> + writel(0x000003FF, 0XF8006218);
> + writel(0x000003FF, 0XF800621C);
> + writel(0x000003FF, 0XF8006220);
> + writel(0x000003FF, 0XF8006224);
> + writel(0x00000000, 0XF80062A8);
> + writel(0x00000000, 0XF80062AC);
> + writel(0x00005125, 0XF80062B0);
> + writel(0x000012A8, 0XF80062B4);
> + writel(0x00000081, 0XF8006000);
> +
> + /* poor mans pinctrl */
> + writel(0x000002E0, ZYNQ_MIO_BASE + 0xC0);
> + writel(0x000002E1, ZYNQ_MIO_BASE + 0xC4);
> + /* UART1 pinmux */
> + writel(0x000002E1, ZYNQ_MIO_BASE + 0xC8);
> + writel(0x000002E0, ZYNQ_MIO_BASE + 0xCC);
> +
> + /* poor mans clkctrl */
> + writel(0x00001403, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_UART_CLK_CTRL);
> +
> + writel(0x00000001, 0xf8000138);
> + writel(0x00100801, 0xf8000140);
> + writel(0x00000302, 0xf8000740);
> + writel(0x00000302, 0xf8000744);
> + writel(0x00000302, 0xf8000748);
> + writel(0x00000302, 0xf800074C);
> + writel(0x00000302, 0xf8000750);
> + writel(0x00000302, 0xf8000754);
> +
> + writel(0x00000001, 0xf8000B00);
> +
> + /* lock up. secure, secure */
> + writel(0x0000767B, ZYNQ_SLCR_LOCK);
why so many ocde htat early
> +
> + arm_cpu_lowlevel_init();
> + barebox_arm_entry(0, SZ_512M, 0);
> +}
> diff --git a/arch/arm/configs/zedboard_defconfig b/arch/arm/configs/zedboard_defconfig
> new file mode 100644
> index 0000000..978689f
> --- /dev/null
> +++ b/arch/arm/configs/zedboard_defconfig
> @@ -0,0 +1,45 @@
> +CONFIG_ARCH_ZYNQ=y
> +CONFIG_AEABI=y
> +CONFIG_CMD_ARM_MMUINFO=y
> +CONFIG_ARM_UNWIND=y
> +CONFIG_MMU=y
> +CONFIG_STACK_SIZE=0xf000
> +CONFIG_MALLOC_SIZE=0x8000000
> +CONFIG_MALLOC_TLSF=y
> +CONFIG_KALLSYMS=y
> +CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_MENU=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/avnet-zedboard/env"
> +CONFIG_DEBUG_INFO=y
> +CONFIG_DEBUG_LL=y
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_MENU=y
> +CONFIG_CMD_MENU_MANAGEMENT=y
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_DIRNAME=y
> +CONFIG_CMD_LN=y
> +CONFIG_CMD_READLINK=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_BOOTM_VERBOSE=y
> +CONFIG_CMD_BOOTM_OFTREE=y
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_OFTREE=y
> +CONFIG_CMD_OFTREE_PROBE=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_PARTITION=y
> +# CONFIG_CMD_HELP is not set
> +CONFIG_CMD_CLK=y
> +CONFIG_NET=y
> +CONFIG_NET_DHCP=y
> +# CONFIG_SPI is not set
> +CONFIG_FS_TFTP=y
> +CONFIG_DIGEST=y
> +CONFIG_MD5=y
> --
> 1.8.2.rc2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 4/5] ARM: zynq: add zynq fsbl checksum script
2013-03-25 13:02 [PATCH v3 " Steffen Trumtrar
@ 2013-03-25 13:02 ` Steffen Trumtrar
0 siblings, 0 replies; 21+ messages in thread
From: Steffen Trumtrar @ 2013-03-25 13:02 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
The bootrom only reads an image if the correct checksum is present in the
header. The calculation is pretty simple:
sum over all words from 0x20 to 0x44
Two of this words are the image length. That is why the checksum can not be
calculated until barebox_image_size is known.
The easiest solution is a program that has to be run after make.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
scripts/Makefile | 1 +
scripts/zynq_checksum.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 73 insertions(+)
create mode 100644 scripts/zynq_checksum.c
diff --git a/scripts/Makefile b/scripts/Makefile
index 08b325c..41c892e 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -12,6 +12,7 @@ hostprogs-$(CONFIG_ARCH_NETX) += gen_netx_image
hostprogs-$(CONFIG_ARCH_OMAP) += omap_signGP mk-am35xx-spi-image
hostprogs-$(CONFIG_ARCH_S5PCxx) += s5p_cksum
hostprogs-$(CONFIG_ARCH_DAVINCI) += mkublheader
+hostprogs-$(CONFIG_ARCH_ZYNQ) += zynq_checksum
HOSTLOADLIBES_omap4_usbboot = -lpthread
omap4_usbboot-objs := usb_linux.o omap4_usbboot.o
diff --git a/scripts/zynq_checksum.c b/scripts/zynq_checksum.c
new file mode 100644
index 0000000..f32db61
--- /dev/null
+++ b/scripts/zynq_checksum.c
@@ -0,0 +1,72 @@
+#include <endian.h>
+#include <errno.h>
+#include <malloc.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/stat.h>
+
+static void usage(char *name)
+{
+ printf("Usage: %s barebox.bin <outfile>\n", name);
+}
+
+int main(int argc, char *argv[])
+{
+ FILE *ifile, *ofile;
+ unsigned int *buf;
+ const char *infile;
+ const char *outfile;
+ struct stat st;
+ unsigned int i;
+ unsigned long sum = 0;
+
+ if (argc != 3) {
+ usage(argv[0]);
+ exit(1);
+ }
+
+ infile = argv[1];
+ outfile = argv[2];
+
+ if (stat(infile, &st) == -1) {
+ perror("stat");
+ exit(EXIT_FAILURE);
+ }
+
+ buf = malloc(sizeof(*buf) * st.st_size);
+ if (!buf) {
+ fprintf(stderr, "Unable to allocate buffer\n");
+ return -1;
+ }
+ ifile = fopen(infile, "rb");
+ if (!ifile) {
+ fprintf(stderr, "Cannot open %s for reading\n",
+ infile);
+ free(buf);
+ exit(EXIT_FAILURE);
+ }
+ ofile = fopen(outfile, "wb");
+ if (!ofile) {
+ fprintf(stderr, "Cannot open %s for writing\n",
+ outfile);
+ fclose(ifile);
+ free(buf);
+ exit(EXIT_FAILURE);
+ }
+
+ fread(buf, 4, st.st_size, ifile);
+
+ for (i = 0x8; i < 0x12; i++)
+ sum += htole32(buf[i]);
+
+ sum = ~sum;
+ buf[i] = sum;
+
+ fwrite(buf, st.st_size / 4, 4, ofile);
+
+ fclose(ofile);
+ fclose(ifile);
+ free(buf);
+
+ return 0;
+}
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2013-03-25 13:03 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-03-19 9:21 [PATCH v2 0/5] ARM: add support for Zynq Steffen Trumtrar
2013-03-19 9:21 ` [PATCH v2 1/5] serial: Add driver for Cadence UART Steffen Trumtrar
2013-03-19 15:22 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-19 9:21 ` [PATCH v2 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
2013-03-19 13:05 ` Josh Cartwright
2013-03-19 13:18 ` Josh Cartwright
2013-03-19 13:31 ` Steffen Trumtrar
2013-03-19 15:26 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-19 9:21 ` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
2013-03-19 13:29 ` Josh Cartwright
2013-03-19 13:35 ` Steffen Trumtrar
2013-03-19 13:48 ` Josh Cartwright
2013-03-19 9:21 ` [PATCH v2 4/5] ARM: zynq: add zynq fsbl checksum script Steffen Trumtrar
2013-03-19 9:22 ` [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard Steffen Trumtrar
2013-03-19 13:40 ` Josh Cartwright
2013-03-19 13:47 ` Steffen Trumtrar
2013-03-19 15:28 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-19 12:59 ` [PATCH v2 0/5] ARM: add support for Zynq Josh Cartwright
2013-03-19 13:57 ` Steffen Trumtrar
2013-03-19 15:08 ` Josh Cartwright
2013-03-25 13:02 [PATCH v3 " Steffen Trumtrar
2013-03-25 13:02 ` [PATCH v2 4/5] ARM: zynq: add zynq fsbl checksum script Steffen Trumtrar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox