mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Subject: [PATCH v3 1/5] serial: Add driver for Cadence UART
Date: Mon, 25 Mar 2013 14:02:46 +0100	[thread overview]
Message-ID: <1364216570-18315-2-git-send-email-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <1364216570-18315-1-git-send-email-s.trumtrar@pengutronix.de>

Support for Cadence UART core.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---

Changes since v2:
	- remove superfluous Kconfig option
	- add help text to Kconfig option

 drivers/serial/Kconfig          |   5 +
 drivers/serial/Makefile         |   1 +
 drivers/serial/serial_cadence.c | 307 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 313 insertions(+)
 create mode 100644 drivers/serial/serial_cadence.c

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index f61d670..73cb9f8 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -113,4 +113,9 @@ config DRIVER_SERIAL_OMAP4_USBBOOT
 	help
 	  Enable this to get console support over the usb bus used to boot an OMAP4
 
+config DRIVER_SERIAL_CADENCE
+	bool "Cadence UART driver"
+	help
+	  Say Y here if you have a Cadence serial IP core.
+
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 893e282..963a7df 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_DRIVER_SERIAL_ALTERA)		+= serial_altera.o
 obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG)		+= serial_altera_jtag.o
 obj-$(CONFIG_DRIVER_SERIAL_PXA)			+= serial_pxa.o
 obj-$(CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT)	+= serial_omap4_usbboot.o
+obj-$(CONFIG_DRIVER_SERIAL_CADENCE)		+= serial_cadence.o
diff --git a/drivers/serial/serial_cadence.c b/drivers/serial/serial_cadence.c
new file mode 100644
index 0000000..c29c391
--- /dev/null
+++ b/drivers/serial/serial_cadence.c
@@ -0,0 +1,307 @@
+/*
+ * (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <malloc.h>
+#include <notifier.h>
+#include <io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#define CADENCE_UART_CONTROL		0x00
+#define CADENCE_UART_MODE		0x04
+#define CADENCE_UART_BAUD_GEN		0x18
+#define CADENCE_UART_CHANNEL_STS	0x2C
+#define CADENCE_UART_RXTXFIFO		0x30
+#define CADENCE_UART_BAUD_DIV		0x34
+
+#define CADENCE_CTRL_RXRES		(1 << 0)
+#define CADENCE_CTRL_TXRES		(1 << 1)
+#define CADENCE_CTRL_RXEN		(1 << 2)
+#define CADENCE_CTRL_RXDIS		(1 << 3)
+#define CADENCE_CTRL_TXEN		(1 << 4)
+#define CADENCE_CTRL_TXDIS		(1 << 5)
+#define CADENCE_CTRL_RSTTO		(1 << 6)
+#define CADENCE_CTRL_STTBRK		(1 << 7)
+#define CADENCE_CTRL_STPBRK		(1 << 8)
+
+#define CADENCE_MODE_CLK_REF		(0 << 0)
+#define CADENCE_MODE_CLK_REF_DIV	(1 << 0)
+#define CADENCE_MODE_CHRL_6		(3 << 1)
+#define CADENCE_MODE_CHRL_7		(2 << 1)
+#define CADENCE_MODE_CHRL_8		(0 << 1)
+#define CADENCE_MODE_PAR_EVEN		(0 << 3)
+#define CADENCE_MODE_PAR_ODD		(1 << 3)
+#define CADENCE_MODE_PAR_SPACE		(2 << 3)
+#define CADENCE_MODE_PAR_MARK		(3 << 3)
+#define CADENCE_MODE_PAR_NONE		(4 << 3)
+
+#define CADENCE_STS_REMPTY		(1 << 1)
+#define CADENCE_STS_RFUL		(1 << 2)
+#define CADENCE_STS_TEMPTY		(1 << 3)
+#define CADENCE_STS_TFUL		(1 << 4)
+
+/*
+ * create default values for different platforms
+ */
+struct cadence_serial_devtype_data {
+	u32 ctrl;
+	u32 mode;
+};
+
+static struct cadence_serial_devtype_data cadence_r1p08_data = {
+	.ctrl = CADENCE_CTRL_RXEN | CADENCE_CTRL_TXEN,
+	.mode = CADENCE_MODE_CLK_REF | CADENCE_MODE_CHRL_8 | CADENCE_MODE_PAR_NONE,
+};
+
+struct cadence_serial_priv {
+	struct console_device cdev;
+	int baudrate;
+	struct notifier_block notify;
+	void __iomem *regs;
+	struct clk *clk;
+	struct cadence_serial_devtype_data *devtype;
+};
+
+static int cadence_serial_reset(struct console_device *cdev)
+{
+	struct cadence_serial_priv *priv = container_of(cdev,
+					struct cadence_serial_priv, cdev);
+
+	/* Soft-Reset Tx/Rx paths */
+	writel(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES, priv->regs +
+		CADENCE_UART_CONTROL);
+
+	while (readl(priv->regs + CADENCE_UART_CONTROL) &
+		(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES))
+		;
+
+	return 0;
+}
+
+static int cadence_serial_setbaudrate(struct console_device *cdev, int baudrate)
+{
+	struct cadence_serial_priv *priv = container_of(cdev,
+					struct cadence_serial_priv, cdev);
+	unsigned int gen, div;
+	int calc_rate;
+	unsigned long clk;
+	int error;
+	int val;
+
+	clk = clk_get_rate(priv->clk);
+	priv->baudrate = baudrate;
+
+	/* disable transmitter and receiver */
+	val = readl(priv->regs + CADENCE_UART_CONTROL);
+	val &= ~CADENCE_CTRL_TXEN & ~CADENCE_CTRL_RXEN;
+	writel(val, priv->regs + CADENCE_UART_CONTROL);
+
+	/*
+	 *	      clk
+	 * rate = -----------
+	 *	  gen*(div+1)
+	 */
+
+	for (div = 4; div < 256; div++) {
+		gen = clk / (baudrate * (div + 1));
+
+		if (gen < 1 || gen > 65535)
+			continue;
+
+		calc_rate = clk / (gen * (div + 1));
+		error = baudrate - calc_rate;
+		if (error < 0)
+			error *= -1;
+		if (((error * 100) / baudrate) < 3)
+			break;
+	}
+
+	writel(gen, priv->regs + CADENCE_UART_BAUD_GEN);
+	writel(div, priv->regs + CADENCE_UART_BAUD_DIV);
+
+	/* Soft-Reset Tx/Rx paths */
+	writel(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES, priv->regs +
+		CADENCE_UART_CONTROL);
+
+	while (readl(priv->regs + CADENCE_UART_CONTROL) &
+		(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES))
+		;
+
+	/* Enable UART */
+	writel(priv->devtype->ctrl, priv->regs + CADENCE_UART_CONTROL);
+
+	return 0;
+}
+
+static int cadence_serial_init_port(struct console_device *cdev)
+{
+	struct cadence_serial_priv *priv = container_of(cdev,
+					struct cadence_serial_priv, cdev);
+
+	cadence_serial_reset(cdev);
+
+	/* Enable UART */
+	writel(priv->devtype->ctrl, priv->regs + CADENCE_UART_CONTROL);
+	writel(priv->devtype->mode, priv->regs + CADENCE_UART_MODE);
+
+	return 0;
+}
+
+static void cadence_serial_putc(struct console_device *cdev, char c)
+{
+	struct cadence_serial_priv *priv = container_of(cdev,
+					struct cadence_serial_priv, cdev);
+
+	while ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
+		CADENCE_STS_TFUL) != 0)
+		;
+
+	writel(c, priv->regs + CADENCE_UART_RXTXFIFO);
+}
+
+static int cadence_serial_tstc(struct console_device *cdev)
+{
+	struct cadence_serial_priv *priv = container_of(cdev,
+					struct cadence_serial_priv, cdev);
+
+	return ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
+		 CADENCE_STS_REMPTY) == 0);
+}
+
+static int cadence_serial_getc(struct console_device *cdev)
+{
+	struct cadence_serial_priv *priv = container_of(cdev,
+					struct cadence_serial_priv, cdev);
+
+	while (!cadence_serial_tstc(cdev))
+		;
+
+	return readl(priv->regs + CADENCE_UART_RXTXFIFO);
+}
+
+static void cadence_serial_flush(struct console_device *cdev)
+{
+	struct cadence_serial_priv *priv = container_of(cdev,
+					struct cadence_serial_priv, cdev);
+
+	while ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
+		CADENCE_STS_TEMPTY) != 0)
+		;
+}
+
+static int cadence_clocksource_clock_change(struct notifier_block *nb,
+			unsigned long event, void *data)
+{
+	struct cadence_serial_priv *priv = container_of(nb,
+					struct cadence_serial_priv, notify);
+
+	cadence_serial_setbaudrate(&priv->cdev, priv->baudrate);
+
+	return 0;
+}
+
+static int cadence_serial_probe(struct device_d *dev)
+{
+	struct console_device *cdev;
+	struct cadence_serial_priv *priv;
+	struct cadence_serial_devtype_data *devtype;
+	int ret;
+
+	ret = dev_get_drvdata(dev, (unsigned long *)&devtype);
+	if (ret)
+		return ret;
+
+	priv = xzalloc(sizeof(*priv));
+	priv->devtype = devtype;
+	cdev = &priv->cdev;
+	dev->priv = priv;
+
+	priv->clk = clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		ret = -ENODEV;
+		goto err_free;
+	}
+
+	if (devtype->mode & CADENCE_MODE_CLK_REF_DIV)
+		clk_set_rate(priv->clk, clk_get_rate(priv->clk) / 8);
+
+	priv->regs = dev_request_mem_region(dev, 0);
+	if (!priv->regs) {
+		ret = -EBUSY;
+		goto err_free;
+	}
+
+	cdev->dev = dev;
+	cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
+	cdev->tstc = cadence_serial_tstc;
+	cdev->putc = cadence_serial_putc;
+	cdev->getc = cadence_serial_getc;
+	cdev->flush = cadence_serial_flush;
+	cdev->setbrg = cadence_serial_setbaudrate;
+
+	cadence_serial_init_port(cdev);
+
+	console_register(cdev);
+	priv->notify.notifier_call = cadence_clocksource_clock_change;
+	clock_register_client(&priv->notify);
+
+	return 0;
+
+err_free:
+	free(priv);
+	return ret;
+}
+
+static void cadence_serial_remove(struct device_d *dev)
+{
+	struct cadence_serial_priv *priv = dev->priv;
+
+	console_unregister(&priv->cdev);
+	free(priv);
+}
+
+static __maybe_unused struct of_device_id cadence_serial_dt_ids[] = {
+	{
+		.compatible = "xlnx,xuartps",
+		.data = (unsigned long)&cadence_r1p08_data,
+	}, {
+		/* sentinel */
+	}
+};
+
+static struct platform_device_id cadence_serial_ids[] = {
+	{
+		.name = "cadence-uart",
+		.driver_data = (unsigned long)&cadence_r1p08_data,
+	}, {
+		/* sentinel */
+	},
+};
+
+static struct driver_d cadence_serial_driver = {
+	.name   = "cadence_serial",
+	.probe  = cadence_serial_probe,
+	.remove = cadence_serial_remove,
+	.of_compatible = DRV_OF_COMPAT(cadence_serial_dt_ids),
+	.id_table = cadence_serial_ids,
+};
+
+static int cadence_serial_init(void)
+{
+	return platform_driver_register(&cadence_serial_driver);
+}
+console_initcall(cadence_serial_init);
-- 
1.8.2.rc2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-03-25 13:03 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-25 13:02 [PATCH v3 0/5] ARM: add support for Zynq Steffen Trumtrar
2013-03-25 13:02 ` Steffen Trumtrar [this message]
2013-03-25 13:02 ` [PATCH v3 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
2013-03-25 13:02 ` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
2013-03-25 13:02 ` [PATCH v2 4/5] ARM: zynq: add zynq fsbl checksum script Steffen Trumtrar
2013-03-25 13:02 ` [PATCH v3 5/5] ARM: zynq: Add support for the Avnet Zedboard Steffen Trumtrar
2013-03-26  9:11 [PATCH v4 0/5] ARM: add support for Zynq Steffen Trumtrar
2013-03-26  9:11 ` [PATCH v3 1/5] serial: Add driver for Cadence UART Steffen Trumtrar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1364216570-18315-2-git-send-email-s.trumtrar@pengutronix.de \
    --to=s.trumtrar@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox