* [PATCH v4 0/5] ARM: add support for Zynq
@ 2013-03-26 9:11 Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v3 1/5] serial: Add driver for Cadence UART Steffen Trumtrar
` (6 more replies)
0 siblings, 7 replies; 17+ messages in thread
From: Steffen Trumtrar @ 2013-03-26 9:11 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
Hi!
This is mostly a repost of v3. Only changes are in 4/5.
The final image now gets always piped through zynq_mkimage. This is needed
anyway, so do it always.
This tool will eventually replace all the flash_header linker stuff, although
it is pretty simple on the Zynq.
Regards,
Steffen
Steffen Trumtrar (5):
serial: Add driver for Cadence UART
ARM: zynq: Add new architecture zynq
ARM: zynq: add clk support for zynq7000
ARM: zynq: add zynq fsbl checksum script
ARM: zynq: Add support for the Avnet Zedboard
.gitignore | 1 +
arch/arm/Kconfig | 5 +
arch/arm/Makefile | 10 +
arch/arm/boards/avnet-zedboard/Makefile | 3 +
arch/arm/boards/avnet-zedboard/board.c | 38 ++
arch/arm/boards/avnet-zedboard/config.h | 4 +
.../boards/avnet-zedboard/env/init/config-board | 7 +
arch/arm/boards/avnet-zedboard/flash_header.c | 62 +++
arch/arm/boards/avnet-zedboard/lowlevel.c | 252 +++++++++++++
arch/arm/configs/zedboard_defconfig | 49 +++
arch/arm/mach-zynq/Kconfig | 38 ++
arch/arm/mach-zynq/Makefile | 1 +
arch/arm/mach-zynq/clk-zynq7000.c | 417 +++++++++++++++++++++
arch/arm/mach-zynq/devices.c | 8 +
arch/arm/mach-zynq/include/mach/barebox.lds.h | 8 +
arch/arm/mach-zynq/include/mach/clkdev.h | 6 +
arch/arm/mach-zynq/include/mach/debug_ll.h | 37 ++
arch/arm/mach-zynq/include/mach/devices.h | 13 +
.../arm/mach-zynq/include/mach/zynq-flash-header.h | 38 ++
arch/arm/mach-zynq/include/mach/zynq7000-regs.h | 132 +++++++
arch/arm/mach-zynq/zynq.c | 56 +++
drivers/serial/Kconfig | 5 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_cadence.c | 307 +++++++++++++++
include/asm-generic/barebox.lds.h | 3 +-
scripts/.gitignore | 1 +
scripts/Makefile | 1 +
scripts/zynq_mkimage.c | 86 +++++
28 files changed, 1588 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
create mode 100644 arch/arm/boards/avnet-zedboard/board.c
create mode 100644 arch/arm/boards/avnet-zedboard/config.h
create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
create mode 100644 arch/arm/configs/zedboard_defconfig
create mode 100644 arch/arm/mach-zynq/Kconfig
create mode 100644 arch/arm/mach-zynq/Makefile
create mode 100644 arch/arm/mach-zynq/clk-zynq7000.c
create mode 100644 arch/arm/mach-zynq/devices.c
create mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h
create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h
create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h
create mode 100644 arch/arm/mach-zynq/include/mach/devices.h
create mode 100644 arch/arm/mach-zynq/include/mach/zynq-flash-header.h
create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-regs.h
create mode 100644 arch/arm/mach-zynq/zynq.c
create mode 100644 drivers/serial/serial_cadence.c
create mode 100644 scripts/zynq_mkimage.c
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 1/5] serial: Add driver for Cadence UART
2013-03-26 9:11 [PATCH v4 0/5] ARM: add support for Zynq Steffen Trumtrar
@ 2013-03-26 9:11 ` Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v3 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
` (5 subsequent siblings)
6 siblings, 0 replies; 17+ messages in thread
From: Steffen Trumtrar @ 2013-03-26 9:11 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
Support for Cadence UART core.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
Changes since v2:
- remove superfluous Kconfig option
- add help text to Kconfig option
drivers/serial/Kconfig | 5 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_cadence.c | 307 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 313 insertions(+)
create mode 100644 drivers/serial/serial_cadence.c
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index f61d670..73cb9f8 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -113,4 +113,9 @@ config DRIVER_SERIAL_OMAP4_USBBOOT
help
Enable this to get console support over the usb bus used to boot an OMAP4
+config DRIVER_SERIAL_CADENCE
+ bool "Cadence UART driver"
+ help
+ Say Y here if you have a Cadence serial IP core.
+
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 893e282..963a7df 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_DRIVER_SERIAL_ALTERA) += serial_altera.o
obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG) += serial_altera_jtag.o
obj-$(CONFIG_DRIVER_SERIAL_PXA) += serial_pxa.o
obj-$(CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT) += serial_omap4_usbboot.o
+obj-$(CONFIG_DRIVER_SERIAL_CADENCE) += serial_cadence.o
diff --git a/drivers/serial/serial_cadence.c b/drivers/serial/serial_cadence.c
new file mode 100644
index 0000000..c29c391
--- /dev/null
+++ b/drivers/serial/serial_cadence.c
@@ -0,0 +1,307 @@
+/*
+ * (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <malloc.h>
+#include <notifier.h>
+#include <io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#define CADENCE_UART_CONTROL 0x00
+#define CADENCE_UART_MODE 0x04
+#define CADENCE_UART_BAUD_GEN 0x18
+#define CADENCE_UART_CHANNEL_STS 0x2C
+#define CADENCE_UART_RXTXFIFO 0x30
+#define CADENCE_UART_BAUD_DIV 0x34
+
+#define CADENCE_CTRL_RXRES (1 << 0)
+#define CADENCE_CTRL_TXRES (1 << 1)
+#define CADENCE_CTRL_RXEN (1 << 2)
+#define CADENCE_CTRL_RXDIS (1 << 3)
+#define CADENCE_CTRL_TXEN (1 << 4)
+#define CADENCE_CTRL_TXDIS (1 << 5)
+#define CADENCE_CTRL_RSTTO (1 << 6)
+#define CADENCE_CTRL_STTBRK (1 << 7)
+#define CADENCE_CTRL_STPBRK (1 << 8)
+
+#define CADENCE_MODE_CLK_REF (0 << 0)
+#define CADENCE_MODE_CLK_REF_DIV (1 << 0)
+#define CADENCE_MODE_CHRL_6 (3 << 1)
+#define CADENCE_MODE_CHRL_7 (2 << 1)
+#define CADENCE_MODE_CHRL_8 (0 << 1)
+#define CADENCE_MODE_PAR_EVEN (0 << 3)
+#define CADENCE_MODE_PAR_ODD (1 << 3)
+#define CADENCE_MODE_PAR_SPACE (2 << 3)
+#define CADENCE_MODE_PAR_MARK (3 << 3)
+#define CADENCE_MODE_PAR_NONE (4 << 3)
+
+#define CADENCE_STS_REMPTY (1 << 1)
+#define CADENCE_STS_RFUL (1 << 2)
+#define CADENCE_STS_TEMPTY (1 << 3)
+#define CADENCE_STS_TFUL (1 << 4)
+
+/*
+ * create default values for different platforms
+ */
+struct cadence_serial_devtype_data {
+ u32 ctrl;
+ u32 mode;
+};
+
+static struct cadence_serial_devtype_data cadence_r1p08_data = {
+ .ctrl = CADENCE_CTRL_RXEN | CADENCE_CTRL_TXEN,
+ .mode = CADENCE_MODE_CLK_REF | CADENCE_MODE_CHRL_8 | CADENCE_MODE_PAR_NONE,
+};
+
+struct cadence_serial_priv {
+ struct console_device cdev;
+ int baudrate;
+ struct notifier_block notify;
+ void __iomem *regs;
+ struct clk *clk;
+ struct cadence_serial_devtype_data *devtype;
+};
+
+static int cadence_serial_reset(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ /* Soft-Reset Tx/Rx paths */
+ writel(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES, priv->regs +
+ CADENCE_UART_CONTROL);
+
+ while (readl(priv->regs + CADENCE_UART_CONTROL) &
+ (CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES))
+ ;
+
+ return 0;
+}
+
+static int cadence_serial_setbaudrate(struct console_device *cdev, int baudrate)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+ unsigned int gen, div;
+ int calc_rate;
+ unsigned long clk;
+ int error;
+ int val;
+
+ clk = clk_get_rate(priv->clk);
+ priv->baudrate = baudrate;
+
+ /* disable transmitter and receiver */
+ val = readl(priv->regs + CADENCE_UART_CONTROL);
+ val &= ~CADENCE_CTRL_TXEN & ~CADENCE_CTRL_RXEN;
+ writel(val, priv->regs + CADENCE_UART_CONTROL);
+
+ /*
+ * clk
+ * rate = -----------
+ * gen*(div+1)
+ */
+
+ for (div = 4; div < 256; div++) {
+ gen = clk / (baudrate * (div + 1));
+
+ if (gen < 1 || gen > 65535)
+ continue;
+
+ calc_rate = clk / (gen * (div + 1));
+ error = baudrate - calc_rate;
+ if (error < 0)
+ error *= -1;
+ if (((error * 100) / baudrate) < 3)
+ break;
+ }
+
+ writel(gen, priv->regs + CADENCE_UART_BAUD_GEN);
+ writel(div, priv->regs + CADENCE_UART_BAUD_DIV);
+
+ /* Soft-Reset Tx/Rx paths */
+ writel(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES, priv->regs +
+ CADENCE_UART_CONTROL);
+
+ while (readl(priv->regs + CADENCE_UART_CONTROL) &
+ (CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES))
+ ;
+
+ /* Enable UART */
+ writel(priv->devtype->ctrl, priv->regs + CADENCE_UART_CONTROL);
+
+ return 0;
+}
+
+static int cadence_serial_init_port(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ cadence_serial_reset(cdev);
+
+ /* Enable UART */
+ writel(priv->devtype->ctrl, priv->regs + CADENCE_UART_CONTROL);
+ writel(priv->devtype->mode, priv->regs + CADENCE_UART_MODE);
+
+ return 0;
+}
+
+static void cadence_serial_putc(struct console_device *cdev, char c)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ while ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
+ CADENCE_STS_TFUL) != 0)
+ ;
+
+ writel(c, priv->regs + CADENCE_UART_RXTXFIFO);
+}
+
+static int cadence_serial_tstc(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ return ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
+ CADENCE_STS_REMPTY) == 0);
+}
+
+static int cadence_serial_getc(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ while (!cadence_serial_tstc(cdev))
+ ;
+
+ return readl(priv->regs + CADENCE_UART_RXTXFIFO);
+}
+
+static void cadence_serial_flush(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ while ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
+ CADENCE_STS_TEMPTY) != 0)
+ ;
+}
+
+static int cadence_clocksource_clock_change(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct cadence_serial_priv *priv = container_of(nb,
+ struct cadence_serial_priv, notify);
+
+ cadence_serial_setbaudrate(&priv->cdev, priv->baudrate);
+
+ return 0;
+}
+
+static int cadence_serial_probe(struct device_d *dev)
+{
+ struct console_device *cdev;
+ struct cadence_serial_priv *priv;
+ struct cadence_serial_devtype_data *devtype;
+ int ret;
+
+ ret = dev_get_drvdata(dev, (unsigned long *)&devtype);
+ if (ret)
+ return ret;
+
+ priv = xzalloc(sizeof(*priv));
+ priv->devtype = devtype;
+ cdev = &priv->cdev;
+ dev->priv = priv;
+
+ priv->clk = clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ ret = -ENODEV;
+ goto err_free;
+ }
+
+ if (devtype->mode & CADENCE_MODE_CLK_REF_DIV)
+ clk_set_rate(priv->clk, clk_get_rate(priv->clk) / 8);
+
+ priv->regs = dev_request_mem_region(dev, 0);
+ if (!priv->regs) {
+ ret = -EBUSY;
+ goto err_free;
+ }
+
+ cdev->dev = dev;
+ cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
+ cdev->tstc = cadence_serial_tstc;
+ cdev->putc = cadence_serial_putc;
+ cdev->getc = cadence_serial_getc;
+ cdev->flush = cadence_serial_flush;
+ cdev->setbrg = cadence_serial_setbaudrate;
+
+ cadence_serial_init_port(cdev);
+
+ console_register(cdev);
+ priv->notify.notifier_call = cadence_clocksource_clock_change;
+ clock_register_client(&priv->notify);
+
+ return 0;
+
+err_free:
+ free(priv);
+ return ret;
+}
+
+static void cadence_serial_remove(struct device_d *dev)
+{
+ struct cadence_serial_priv *priv = dev->priv;
+
+ console_unregister(&priv->cdev);
+ free(priv);
+}
+
+static __maybe_unused struct of_device_id cadence_serial_dt_ids[] = {
+ {
+ .compatible = "xlnx,xuartps",
+ .data = (unsigned long)&cadence_r1p08_data,
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct platform_device_id cadence_serial_ids[] = {
+ {
+ .name = "cadence-uart",
+ .driver_data = (unsigned long)&cadence_r1p08_data,
+ }, {
+ /* sentinel */
+ },
+};
+
+static struct driver_d cadence_serial_driver = {
+ .name = "cadence_serial",
+ .probe = cadence_serial_probe,
+ .remove = cadence_serial_remove,
+ .of_compatible = DRV_OF_COMPAT(cadence_serial_dt_ids),
+ .id_table = cadence_serial_ids,
+};
+
+static int cadence_serial_init(void)
+{
+ return platform_driver_register(&cadence_serial_driver);
+}
+console_initcall(cadence_serial_init);
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 2/5] ARM: zynq: Add new architecture zynq
2013-03-26 9:11 [PATCH v4 0/5] ARM: add support for Zynq Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v3 1/5] serial: Add driver for Cadence UART Steffen Trumtrar
@ 2013-03-26 9:11 ` Steffen Trumtrar
2013-03-26 13:19 ` Josh Cartwright
2013-03-26 9:11 ` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
` (4 subsequent siblings)
6 siblings, 1 reply; 17+ messages in thread
From: Steffen Trumtrar @ 2013-03-26 9:11 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
Add basic support for the Xilinx Zynq-7000 EPP architecture.
The Zynq-7000 is an embedded processing platform that combines a Cortex A9
dualcore MPSoC with an Artix-7 FPGA.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
Changes since v2:
- don't force serial driver in Kconfig
- remove MACH_HAS_LOWLEVEL_INIT
- use (void __iomem *) in debug_ll.h
- remove zynq_add_device inline function
- use resource_size_t instead of void *
- use __le32 consistently in zynq-flash-header.h
- remove useless flash_header_start section
arch/arm/Kconfig | 5 +
arch/arm/Makefile | 2 +
arch/arm/mach-zynq/Kconfig | 38 ++++++
arch/arm/mach-zynq/Makefile | 1 +
arch/arm/mach-zynq/devices.c | 8 ++
arch/arm/mach-zynq/include/mach/barebox.lds.h | 8 ++
arch/arm/mach-zynq/include/mach/debug_ll.h | 37 ++++++
arch/arm/mach-zynq/include/mach/devices.h | 13 ++
| 38 ++++++
arch/arm/mach-zynq/include/mach/zynq7000-regs.h | 132 +++++++++++++++++++++
arch/arm/mach-zynq/zynq.c | 56 +++++++++
include/asm-generic/barebox.lds.h | 3 +-
12 files changed, 340 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-zynq/Kconfig
create mode 100644 arch/arm/mach-zynq/Makefile
create mode 100644 arch/arm/mach-zynq/devices.c
create mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h
create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h
create mode 100644 arch/arm/mach-zynq/include/mach/devices.h
create mode 100644 arch/arm/mach-zynq/include/mach/zynq-flash-header.h
create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-regs.h
create mode 100644 arch/arm/mach-zynq/zynq.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 28332ec..8431fa8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -110,6 +110,10 @@ config ARCH_TEGRA
select CPU_ARM926T
select HAS_DEBUG_LL
+config ARCH_ZYNQ
+ bool "Xilinx Zynq-based boards"
+ select HAS_DEBUG_LL
+
endchoice
source arch/arm/cpu/Kconfig
@@ -126,6 +130,7 @@ source arch/arm/mach-pxa/Kconfig
source arch/arm/mach-samsung/Kconfig
source arch/arm/mach-versatile/Kconfig
source arch/arm/mach-tegra/Kconfig
+source arch/arm/mach-zynq/Kconfig
config ARM_ASM_UNIFIED
bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index fcb2969..ceb45dc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -64,6 +64,7 @@ machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_SAMSUNG) := samsung
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_TEGRA) := tegra
+machine-$(CONFIG_ARCH_ZYNQ) := zynq
# Board directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
@@ -157,6 +158,7 @@ board-$(CONFIG_MACH_SABRELITE) := freescale-mx6-sabrelite
board-$(CONFIG_MACH_TX53) := karo-tx53
board-$(CONFIG_MACH_GUF_VINCELL) := guf-vincell
board-$(CONFIG_MACH_EFIKA_MX_SMARTBOOK) := efika-mx-smartbook
+board-$(CONFIG_MACH_ZEDBOARD) := avnet-zedboard
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
new file mode 100644
index 0000000..5bbd648
--- /dev/null
+++ b/arch/arm/mach-zynq/Kconfig
@@ -0,0 +1,38 @@
+if ARCH_ZYNQ
+
+config ARCH_TEXT_BASE
+ hex
+ default 0x1ff00000 if MACH_ZEDBOARD
+
+config ZYNQ_DEBUG_LL_UART_BASE
+ hex
+ default 0xe0001000 if MACH_ZEDBOARD
+
+config BOARDINFO
+ default "ZedBoard" if MACH_ZEDBOARD
+
+choice
+ prompt "Xilinx Zynq type board"
+
+config ARCH_ZYNQ7000
+ bool "Zynq-7000"
+ select CPU_V7
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select ARM_SMP_TWD
+
+endchoice
+
+if ARCH_ZYNQ7000
+
+choice
+ prompt "Zynq-7000 Board Type"
+
+config MACH_ZEDBOARD
+ bool "Avnet Zynq-7000 ZedBoard"
+ select DRIVER_SERIAL_CADENCE
+
+endchoice
+endif
+
+endif
diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile
new file mode 100644
index 0000000..459c957
--- /dev/null
+++ b/arch/arm/mach-zynq/Makefile
@@ -0,0 +1 @@
+obj-y += zynq.o devices.o clk-zynq7000.o
diff --git a/arch/arm/mach-zynq/devices.c b/arch/arm/mach-zynq/devices.c
new file mode 100644
index 0000000..777bb87
--- /dev/null
+++ b/arch/arm/mach-zynq/devices.c
@@ -0,0 +1,8 @@
+#include <common.h>
+#include <driver.h>
+#include <mach/devices.h>
+
+struct device_d *zynq_add_uart(resource_size_t base, int id)
+{
+ return add_generic_device("cadence-uart", id, NULL, base, 0x1000, IORESOURCE_MEM, NULL);
+}
diff --git a/arch/arm/mach-zynq/include/mach/barebox.lds.h b/arch/arm/mach-zynq/include/mach/barebox.lds.h
new file mode 100644
index 0000000..3d35fe9
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/barebox.lds.h
@@ -0,0 +1,8 @@
+#define PRE_IMAGE \
+ .pre_image : { \
+ . = 0x20; \
+ KEEP(*(.flash_header_0x0*)) \
+ . = 0xa0; \
+ KEEP(*(.ps7reg_entry_0x0A0)) \
+ . = 0x8c0; \
+ }
diff --git a/arch/arm/mach-zynq/include/mach/debug_ll.h b/arch/arm/mach-zynq/include/mach/debug_ll.h
new file mode 100644
index 0000000..6c20dd5
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/debug_ll.h
@@ -0,0 +1,37 @@
+/*
+ * based on mach-imx/include/mach/debug_ll.h
+ */
+
+#ifndef __MACH_DEBUG_LL_H__
+#define __MACH_DEBUG_LL_H__
+
+#include <io.h>
+#include <mach/zynq7000-regs.h>
+
+#ifndef CONFIG_ZYNQ_DEBUG_LL_UART_BASE
+#warning define ZYNQ_DEBUG_LL_UART_BASE properly for debug_ll
+#define ZYNQ_DEBUG_LL_UART_BASE ZYNQ_UART1_BASE_ADDR
+#else
+#define ZYNQ_DEBUG_LL_UART_BASE CONFIG_ZYNQ_DEBUG_LL_UART_BASE
+#endif
+
+#define ZYNQ_UART_RXTXFIFO 0x30
+#define ZYNQ_UART_CHANNEL_STS 0x2C
+
+#define ZYNQ_UART_STS_TFUL (1 << 4)
+#define ZYNQ_UART_TXDIS (1 << 5)
+
+static inline void PUTC_LL(int c)
+{
+ void __iomem *base = (void __iomem *)ZYNQ_DEBUG_LL_UART_BASE;
+
+ if (readl(base) & ZYNQ_UART_TXDIS)
+ return;
+
+ while ((readl(base + ZYNQ_UART_CHANNEL_STS) & ZYNQ_UART_STS_TFUL) != 0)
+ ;
+
+ writel(c, base + ZYNQ_UART_RXTXFIFO);
+}
+
+#endif
diff --git a/arch/arm/mach-zynq/include/mach/devices.h b/arch/arm/mach-zynq/include/mach/devices.h
new file mode 100644
index 0000000..281d7c6
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/devices.h
@@ -0,0 +1,13 @@
+#include <mach/zynq7000-regs.h>
+
+struct device_d *zynq_add_uart(resource_size_t base, int id);
+
+static inline struct device_d *zynq_add_uart0(void)
+{
+ return zynq_add_uart((resource_size_t)ZYNQ_UART0_BASE_ADDR, 0);
+}
+
+static inline struct device_d *zynq_add_uart1(void)
+{
+ return zynq_add_uart((resource_size_t)ZYNQ_UART1_BASE_ADDR, 1);
+}
--git a/arch/arm/mach-zynq/include/mach/zynq-flash-header.h b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
new file mode 100644
index 0000000..3b67e55
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
@@ -0,0 +1,38 @@
+#ifndef __MACH_FLASH_HEADER_H
+#define __MACH_FLASH_HEADER_H
+
+#include <asm-generic/sections.h>
+
+#define __flash_header_section __section(.flash_header_0x0)
+#define __ps7reg_entry_section __section(.ps7reg_entry_0x0A0)
+#define __image_len_section __section(.image_len_0x08c0)
+#define FLASH_HEADER_OFFSET 0x0
+#define IMAGE_OFFSET 0x8c0
+
+#define DEST_BASE 0x8c0
+#define FLASH_HEADER_BASE (DEST_BASE + FLASH_HEADER_OFFSET)
+
+struct zynq_reg_entry {
+ __le32 addr;
+ __le32 val;
+};
+
+#define WIDTH_DETECTION_MAGIC 0xAA995566
+#define IMAGE_IDENTIFICATION 0x584C4E58 /* "XLNX" */
+
+struct zynq_flash_header {
+ __le32 width_det;
+ __le32 image_id;
+ __le32 enc_stat;
+ __le32 user;
+ __le32 flash_offset;
+ __le32 length;
+ __le32 res0;
+ __le32 start_of_exec;
+ __le32 total_len;
+ __le32 res1;
+ __le32 checksum;
+ __le32 res2;
+};
+
+#endif /* __MACH_FLASH_HEADER_H */
diff --git a/arch/arm/mach-zynq/include/mach/zynq7000-regs.h b/arch/arm/mach-zynq/include/mach/zynq7000-regs.h
new file mode 100644
index 0000000..f5ccbb0
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/zynq7000-regs.h
@@ -0,0 +1,132 @@
+/*
+ * (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define ZYNQ_UART0_BASE_ADDR 0xE0000000
+#define ZYNQ_UART1_BASE_ADDR 0xE0001000
+#define ZYNQ_I2C0_BASE_ADDR 0xE0004000
+#define ZYNQ_I2C1_BASE_ADDR 0xE0005000
+#define ZYNQ_SPI0_BASE_ADDR 0xE0006000
+#define ZYNQ_SPI1_BASE_ADDR 0xE0007000
+#define ZYNQ_CAN0_BASE_ADDR 0xE0008000
+#define ZYNQ_CAN1_BASE_ADDR 0xE0009000
+#define ZYNQ_GPIO_BASE_ADDR 0xE000A000
+
+#define ZYNQ_SLCR_BASE 0xF8000000
+#define ZYNQ_SLCR_SCL (ZYNQ_SLCR_BASE + 0x000)
+#define ZYNQ_SLCR_LOCK (ZYNQ_SLCR_BASE + 0x004)
+#define ZYNQ_SLCR_UNLOCK (ZYNQ_SLCR_BASE + 0x008)
+#define ZYNQ_SLCR_LOCKSTA (ZYNQ_SLCR_BASE + 0x00C)
+#define ZYNQ_CLOCK_CTRL_BASE (ZYNQ_SLCR_BASE + 0x100)
+#define ZYNQ_ARM_PLL_CTRL 0x000
+#define ZYNQ_DDR_PLL_CTRL 0x004
+#define ZYNQ_IO_PLL_CTRL 0x008
+#define ZYNQ_PLL_STATUS 0x00C
+#define ZYNQ_ARM_PLL_CFG 0x010
+#define ZYNQ_DDR_PLL_CFG 0x014
+#define ZYNQ_IO_PLL_CFG 0x018
+#define ZYNQ_ARM_CLK_CTRL 0x020
+#define ZYNQ_DDR_CLK_CTRL 0x024
+#define ZYNQ_DCI_CLK_CTRL 0x028
+#define ZYNQ_APER_CLK_CTRL 0x02C
+#define ZYNQ_USB0_CLK_CTRL 0x030
+#define ZYNQ_USB1_CLK_CTRL 0x034
+#define ZYNQ_GEM0_RCLK_CTRL 0x038
+#define ZYNQ_GEM1_RCLK_CTRL 0x03C
+#define ZYNQ_GEM0_CLK_CTRL 0x040
+#define ZYNQ_GEM1_CLK_CTRL 0x044
+#define ZYNQ_SMC_CLK_CTRL 0x048
+#define ZYNQ_LQSPI_CLK_CTRL 0x04C
+#define ZYNQ_SDIO_CLK_CTRL 0x050
+#define ZYNQ_UART_CLK_CTRL 0x054
+#define ZYNQ_SPI_CLK_CTRL 0x058
+#define ZYNQ_CAN_CLK_CTRL 0x05C
+#define ZYNQ_CAN_MIOCLK_CTRL 0x060
+#define ZYNQ_DBG_CLK_CTRL 0x064
+#define ZYNQ_PCAP_CLK_CTRL 0x068
+#define ZYNQ_TOPSW_CLK_CTRL 0x06C
+#define ZYNQ_FPGA0_CLK_CTRL 0x070
+#define ZYNQ_FPGA1_CLK_CTRL 0x080
+#define ZYNQ_FPGA2_CLK_CTRL 0x090
+#define ZYNQ_FPGA3_CLK_CTRL 0x0A0
+#define ZYNQ_CLK_621_TRUE 0x0C4
+#define ZYNQ_RST_CTRL_BASE (ZYNQ_SLCR_BASE + 0x200)
+#define ZYNQ_PSS_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x000)
+#define ZYNQ_DDR_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x004)
+#define ZYNQ_TOPSW_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x008)
+#define ZYNQ_DMAC_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x00C)
+#define ZYNQ_USB_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x010)
+#define ZYNQ_GEM_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x014)
+#define ZYNQ_SDIO_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x018)
+#define ZYNQ_SPI_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x01C)
+#define ZYNQ_CAN_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x020)
+#define ZYNQ_I2C_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x024)
+#define ZYNQ_UART_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x028)
+#define ZYNQ_GPIO_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x02C)
+#define ZYNQ_LQSPI_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x030)
+#define ZYNQ_SMC_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x034)
+#define ZYNQ_OCM_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x038)
+#define ZYNQ_DEVCI_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x03C)
+#define ZYNQ_FPGA_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x040)
+#define ZYNQ_A9_CPU_RST_CTRL (ZYNQ_RST_CTRL_BASE + 0x044)
+#define ZYNQ_RS_AWDT_CTRL (ZYNQ_RST_CTRL_BASE + 0x04C)
+#define ZYNQ_REBOOT_STATUS (ZYNQ_SLCR_BASE + 0x258)
+#define ZYNQ_BOOT_MODE (ZYNQ_SLCR_BASE + 0x25C)
+#define ZYNQ_APU_CTRL (ZYNQ_SLCR_BASE + 0x300)
+#define ZYNQ_WDT_CLK_SEL (ZYNQ_SLCR_BASE + 0x304)
+#define ZYNQ_PSS_IDCODE (ZYNQ_SLCR_BASE + 0x530)
+#define ZYNQ_DDR_URGENT (ZYNQ_SLCR_BASE + 0x600)
+#define ZYNQ_DDR_CAL_START (ZYNQ_SLCR_BASE + 0x60C)
+#define ZYNQ_DDR_REF_START (ZYNQ_SLCR_BASE + 0x614)
+#define ZYNQ_DDR_CMD_STA (ZYNQ_SLCR_BASE + 0x618)
+#define ZYNQ_DDR_URGENT_SEL (ZYNQ_SLCR_BASE + 0x61C)
+#define ZYNQ_DDR_DFI_STATUS (ZYNQ_SLCR_BASE + 0x620)
+#define ZYNQ_MIO_BASE (ZYNQ_SLCR_BASE + 0x700)
+#define ZYNQ_MIO_LOOPBACK (ZYNQ_MIO_BASE + 0x104)
+#define ZYNQ_MIO_MST_TRI0 (ZYNQ_MIO_BASE + 0x10C)
+#define ZYNQ_MIO_MST_TRI1 (ZYNQ_MIO_BASE + 0x110)
+#define ZYNQ_SD0_WP_SEL (ZYNQ_SLCR_BASE + 0x830)
+#define ZYNQ_SD1_WP_SEL (ZYNQ_SLCR_BASE + 0x834)
+#define ZYNQ_LVL_SHIFTR_EN (ZYNQ_SLCR_BASE + 0x900)
+#define ZYNQ_OCM_CFG (ZYNQ_SLCR_BASE + 0x910)
+#define ZYNQ_GPIOB_BASE (ZYNQ_SLCR_BASE + 0xB00)
+#define ZYNQ_GPIOB_CTRL (ZYNQ_GPIOB_BASE + 0x000)
+#define ZYNQ_GPIOB_CFG_CMOS18 (ZYNQ_GPIOB_BASE + 0x004)
+#define ZYNQ_GPIOB_CFG_CMOS25 (ZYNQ_GPIOB_BASE + 0x008)
+#define ZYNQ_GPIOB_CFG_CMOS33 (ZYNQ_GPIOB_BASE + 0x00C)
+#define ZYNQ_GPIOB_CFG_LVTTL (ZYNQ_GPIOB_BASE + 0x010)
+#define ZYNQ_GPIOB_CFG_HSTL (ZYNQ_GPIOB_BASE + 0x014)
+#define ZYNQ_GPIOB_DRV_BIAS_CTRL (ZYNQ_GPIOB_BASE + 0x018)
+#define ZYNQ_DDRIOB_BASE (ZYNQ_SLCR_BASE + 0xB40)
+#define ZYNQ_DDRIOB_ADDR0 (ZYNQ_DDRIOB_BASE + 0x000)
+#define ZYNQ_DDRIOB_ADDR1 (ZYNQ_DDRIOB_BASE + 0x004)
+#define ZYNQ_DDRIOB_DATA0 (ZYNQ_DDRIOB_BASE + 0x008)
+#define ZYNQ_DDRIOB_DATA1 (ZYNQ_DDRIOB_BASE + 0x00C)
+#define ZYNQ_DDRIOB_DIFF0 (ZYNQ_DDRIOB_BASE + 0x010)
+#define ZYNQ_DDRIOB_DIFF1 (ZYNQ_DDRIOB_BASE + 0x014)
+#define ZYNQ_DDRIOB_CLOCK (ZYNQ_DDRIOB_BASE + 0x018)
+#define ZYNQ_DDRIOB_DRIVE_SLEW_ADDR (ZYNQ_DDRIOB_BASE + 0x01C)
+#define ZYNQ_DDRIOB_DRIVE_SLEW_DATA (ZYNQ_DDRIOB_BASE + 0x020)
+#define ZYNQ_DDRIOB_DRIVE_SLEW_DIFF (ZYNQ_DDRIOB_BASE + 0x024)
+#define ZYNQ_DDRIOB_DRIVE_SLEW_CLOCK (ZYNQ_DDRIOB_BASE + 0x028)
+#define ZYNQ_DDRIOB_DDR_CTRL (ZYNQ_DDRIOB_BASE + 0x02C)
+#define ZYNQ_DDRIOB_DCI_CTRL (ZYNQ_DDRIOB_BASE + 0x030)
+#define ZYNQ_DDRIOB_DCI_STATUS (ZYNQ_DDRIOB_BASE + 0x034)
+
+#define ZYNQ_TTC0_BASE_ADDR 0xF8001000
+#define ZYNQ_TTC1_BASE_ADDR 0xF8002000
+
+#define ZYNQ_DDRC_BASE 0xF8006000
+
+#define CORTEXA9_SCU_TIMER_BASE_ADDR 0xF8F00600
diff --git a/arch/arm/mach-zynq/zynq.c b/arch/arm/mach-zynq/zynq.c
new file mode 100644
index 0000000..bd29e13
--- /dev/null
+++ b/arch/arm/mach-zynq/zynq.c
@@ -0,0 +1,56 @@
+/*
+ * (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/system.h>
+#include <asm-generic/io.h>
+#include <common.h>
+#include <init.h>
+#include <mach/zynq7000-regs.h>
+
+static int zynq_init(void)
+{
+ u32 val;
+
+ dsb();
+ isb();
+ writel(0xDF0D, ZYNQ_SLCR_UNLOCK);
+ /* remap ocm high */
+ writel(0x0000000F, 0xf8000910);
+ /* mpcore.filtering_start_address */
+ writel(0x00000000, 0xf8f00040);
+ /* mpcore.filtering_end_address */
+ writel(0xffe00000, 0xf8f00044);
+ val = readl(0xf8f00000);
+ val |= 0x2;
+ writel(val, 0xf8f00000);
+ dmb();
+
+ add_generic_device("zynq-clock", 0, NULL, ZYNQ_SLCR_BASE, 0x4000, IORESOURCE_MEM, NULL);
+ add_generic_device("smp_twd", 0, NULL, CORTEXA9_SCU_TIMER_BASE_ADDR,
+ 0x4000, IORESOURCE_MEM, NULL);
+ return 0;
+}
+postcore_initcall(zynq_init);
+
+void __noreturn reset_cpu(unsigned long addr)
+{
+ /* write unlock key to slcr */
+ writel(0xDF0D, ZYNQ_SLCR_UNLOCK);
+ /* reset */
+ writel(0x1, ZYNQ_PSS_RST_CTRL);
+
+ while (1)
+ ;
+}
diff --git a/include/asm-generic/barebox.lds.h b/include/asm-generic/barebox.lds.h
index b2bd19e..0b98c96 100644
--- a/include/asm-generic/barebox.lds.h
+++ b/include/asm-generic/barebox.lds.h
@@ -5,7 +5,8 @@
defined CONFIG_ARCH_IMX53 || \
defined CONFIG_ARCH_IMX6 || \
defined CONFIG_X86 || \
- defined CONFIG_ARCH_EP93XX
+ defined CONFIG_ARCH_EP93XX || \
+ defined CONFIG_ARCH_ZYNQ
#include <mach/barebox.lds.h>
#endif
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000
2013-03-26 9:11 [PATCH v4 0/5] ARM: add support for Zynq Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v3 1/5] serial: Add driver for Cadence UART Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v3 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
@ 2013-03-26 9:11 ` Steffen Trumtrar
2013-03-26 13:20 ` Josh Cartwright
2013-03-26 9:11 ` [PATCH v3 4/5] ARM: zynq: add zynq fsbl checksum script Steffen Trumtrar
` (3 subsequent siblings)
6 siblings, 1 reply; 17+ messages in thread
From: Steffen Trumtrar @ 2013-03-26 9:11 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
This adds support for the clocktree on zynq7000 SoCs.
The patch is based on clocks.c from the larger patch
ARM: zynq: add suppport for Zynq 7000 SoC
by Josh Cartwright.
The driver in that patch is converted to a platform_driver and code to
enable plls was added.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
arch/arm/mach-zynq/clk-zynq7000.c | 417 +++++++++++++++++++++++++++++++
arch/arm/mach-zynq/include/mach/clkdev.h | 6 +
2 files changed, 423 insertions(+)
create mode 100644 arch/arm/mach-zynq/clk-zynq7000.c
create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h
diff --git a/arch/arm/mach-zynq/clk-zynq7000.c b/arch/arm/mach-zynq/clk-zynq7000.c
new file mode 100644
index 0000000..1e03514
--- /dev/null
+++ b/arch/arm/mach-zynq/clk-zynq7000.c
@@ -0,0 +1,417 @@
+/*
+ * Copyright (c) 2013 Josh Cartwright <joshc@eso.teric.us>
+ * Copyright (c) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * Based on drivers/clk-zynq.c from Linux.
+ *
+ * Copyright (c) 2012 National Instruments
+ *
+ * Josh Cartwright <josh.cartwright@ni.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <mach/zynq7000-regs.h>
+#include <malloc.h>
+
+enum zynq_clks {
+ dummy, ps_clk, arm_pll, ddr_pll, io_pll, uart_clk, uart0, uart1,
+ cpu_clk, cpu_6x4x, cpu_3x2x, cpu_2x, cpu_1x, clks_max
+};
+
+enum zynq_pll_type {
+ ZYNQ_PLL_ARM,
+ ZYNQ_PLL_DDR,
+ ZYNQ_PLL_IO,
+};
+
+#define PLL_STATUS_ARM_PLL_LOCK (1 << 0)
+#define PLL_STATUS_DDR_PLL_LOCK (1 << 1)
+#define PLL_STATUS_IO_PLL_LOCK (1 << 2)
+#define PLL_STATUS_ARM_PLL_STABLE (1 << 0)
+#define PLL_STATUS_DDR_PLL_STABLE (1 << 1)
+#define PLL_STATUS_IO_PLL_STABLE (1 << 2)
+#define PLL_CTRL_BYPASS_FORCE (1 << 4)
+
+static struct clk *clks[clks_max];
+
+struct zynq_pll_clk {
+ struct clk clk;
+ u32 pll_lock;
+ void __iomem *pll_ctrl;
+};
+
+#define to_zynq_pll_clk(c) container_of(c, struct zynq_pll_clk, clk)
+
+#define PLL_CTRL_FDIV(x) (((x) >> 12) & 0x7F)
+
+static unsigned long zynq_pll_recalc_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ struct zynq_pll_clk *pll = to_zynq_pll_clk(clk);
+ return parent_rate * PLL_CTRL_FDIV(readl(pll->pll_ctrl));
+}
+
+static int zynq_pll_enable(struct clk *clk)
+{
+ struct zynq_pll_clk *pll = to_zynq_pll_clk(clk);
+ u32 val;
+ int timeout = 10000;
+
+ val = readl(pll->pll_ctrl);
+ val &= ~PLL_CTRL_BYPASS_FORCE;
+ writel(val, pll->pll_ctrl);
+
+ while (timeout--) {
+ if (readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & pll->pll_lock)
+ break;
+ }
+
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static struct clk_ops zynq_pll_clk_ops = {
+ .recalc_rate = zynq_pll_recalc_rate,
+ .enable = zynq_pll_enable,
+};
+
+static inline struct clk *zynq_pll_clk(enum zynq_pll_type type,
+ const char *name,
+ void __iomem *pll_ctrl)
+{
+ static const char *pll_parent = "ps_clk";
+ struct zynq_pll_clk *pll;
+ int ret;
+
+ pll = xzalloc(sizeof(*pll));
+ pll->pll_ctrl = pll_ctrl;
+ pll->clk.ops = &zynq_pll_clk_ops;
+ pll->clk.name = name;
+ pll->clk.parent_names = &pll_parent;
+ pll->clk.num_parents = 1;
+
+ switch(type) {
+ case ZYNQ_PLL_ARM:
+ pll->pll_lock = PLL_STATUS_ARM_PLL_LOCK;
+ break;
+ case ZYNQ_PLL_DDR:
+ pll->pll_lock = PLL_STATUS_DDR_PLL_LOCK;
+ break;
+ case ZYNQ_PLL_IO:
+ pll->pll_lock = PLL_STATUS_IO_PLL_LOCK;
+ break;
+ }
+
+ ret = clk_register(&pll->clk);
+ if (ret) {
+ free(pll);
+ return ERR_PTR(ret);
+ }
+
+ return &pll->clk;
+}
+
+struct zynq_periph_clk {
+ struct clk clk;
+ void __iomem *clk_ctrl;
+};
+
+#define to_zynq_periph_clk(c) container_of(c, struct zynq_periph_clk, c)
+
+static const u8 periph_clk_parent_map[] = {
+ 0, 0, 1, 2
+};
+#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4])
+#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8)
+
+static unsigned long zynq_periph_recalc_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ struct zynq_periph_clk *periph = to_zynq_periph_clk(clk);
+ return parent_rate / PERIPH_CLK_CTRL_DIV(readl(periph->clk_ctrl));
+}
+
+static int zynq_periph_get_parent(struct clk *clk)
+{
+ struct zynq_periph_clk *periph = to_zynq_periph_clk(clk);
+ return PERIPH_CLK_CTRL_SRC(readl(periph->clk_ctrl));
+}
+
+static const struct clk_ops zynq_periph_clk_ops = {
+ .recalc_rate = zynq_periph_recalc_rate,
+ .get_parent = zynq_periph_get_parent,
+};
+
+static struct clk *zynq_periph_clk(const char *name, void __iomem *clk_ctrl)
+{
+ static const char *peripheral_parents[] = {
+ "io_pll",
+ "arm_pll",
+ "ddr_pll",
+ };
+ struct zynq_periph_clk *periph;
+ int ret;
+
+ periph = xzalloc(sizeof(*periph));
+
+ periph->clk_ctrl = clk_ctrl;
+ periph->clk.name = name;
+ periph->clk.ops = &zynq_periph_clk_ops;
+ periph->clk.parent_names = peripheral_parents;
+ periph->clk.num_parents = ARRAY_SIZE(peripheral_parents);
+
+ ret = clk_register(&periph->clk);
+ if (ret) {
+ free(periph);
+ return ERR_PTR(ret);
+ }
+
+ return &periph->clk;
+}
+
+/* CPU Clock domain is modelled as a mux with 4 children subclks, whose
+ * derivative rates depend on CLK_621_TRUE
+ */
+
+struct zynq_cpu_clk {
+ struct clk clk;
+ void __iomem *clk_ctrl;
+};
+
+#define to_zynq_cpu_clk(c) container_of(c, struct zynq_cpu_clk, c)
+
+static const u8 zynq_cpu_clk_parent_map[] = {
+ 1, 1, 2, 0
+};
+#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)])
+#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8)
+
+static unsigned long zynq_cpu_clk_recalc_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(clk);
+ return parent_rate / CPU_CLK_CTRL_DIV(readl(cpuclk->clk_ctrl));
+}
+
+static int zynq_cpu_clk_get_parent(struct clk *clk)
+{
+ struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(clk);
+ return CPU_CLK_SRCSEL(readl(cpuclk->clk_ctrl));
+}
+
+static const struct clk_ops zynq_cpu_clk_ops = {
+ .get_parent = zynq_cpu_clk_get_parent,
+ .recalc_rate = zynq_cpu_clk_recalc_rate,
+};
+
+static struct clk *zynq_cpu_clk(const char *name, void __iomem *clk_ctrl)
+{
+ static const char *cpu_parents[] = {
+ "io_pll",
+ "arm_pll",
+ "ddr_pll",
+ };
+ struct zynq_cpu_clk *cpu;
+ int ret;
+
+ cpu = xzalloc(sizeof(*cpu));
+
+ cpu->clk_ctrl = clk_ctrl;
+ cpu->clk.ops = &zynq_cpu_clk_ops;
+ cpu->clk.name = name;
+ cpu->clk.parent_names = cpu_parents;
+ cpu->clk.num_parents = ARRAY_SIZE(cpu_parents);
+
+ ret = clk_register(&cpu->clk);
+ if (ret) {
+ free(cpu);
+ return ERR_PTR(ret);
+ }
+
+ return &cpu->clk;
+}
+
+enum zynq_cpu_subclk_which {
+ CPU_SUBCLK_6X4X,
+ CPU_SUBCLK_3X2X,
+ CPU_SUBCLK_2X,
+ CPU_SUBCLK_1X,
+};
+
+struct zynq_cpu_subclk {
+ struct clk clk;
+ void __iomem *clk_ctrl;
+ void __iomem *clk_621;
+ enum zynq_cpu_subclk_which which;
+};
+
+#define CLK_621_TRUE(x) ((x) & 1)
+
+#define to_zynq_cpu_subclk(c) container_of(c, struct zynq_cpu_subclk, c);
+
+static unsigned long zynq_cpu_subclk_recalc_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ unsigned long uninitialized_var(rate);
+ struct zynq_cpu_subclk *subclk;
+ bool is_621;
+
+ subclk = to_zynq_cpu_subclk(clk);
+ is_621 = CLK_621_TRUE(readl(subclk->clk_621));
+
+ switch (subclk->which) {
+ case CPU_SUBCLK_6X4X:
+ rate = parent_rate;
+ break;
+ case CPU_SUBCLK_3X2X:
+ rate = parent_rate / 2;
+ break;
+ case CPU_SUBCLK_2X:
+ rate = parent_rate / (is_621 ? 3 : 2);
+ break;
+ case CPU_SUBCLK_1X:
+ rate = parent_rate / (is_621 ? 6 : 4);
+ break;
+ };
+
+ return rate;
+}
+
+static int zynq_cpu_subclk_enable(struct clk *clk)
+{
+ struct zynq_cpu_subclk *subclk;
+ u32 tmp;
+
+ subclk = to_zynq_cpu_subclk(clk);
+
+ tmp = readl(subclk->clk_ctrl);
+ tmp |= 1 << (24 + subclk->which);
+ writel(tmp, subclk->clk_ctrl);
+
+ return 0;
+}
+
+static void zynq_cpu_subclk_disable(struct clk *clk)
+{
+ struct zynq_cpu_subclk *subclk;
+ u32 tmp;
+
+ subclk = to_zynq_cpu_subclk(clk);
+
+ tmp = readl(subclk->clk_ctrl);
+ tmp &= ~(1 << (24 + subclk->which));
+ writel(tmp, subclk->clk_ctrl);
+}
+
+static const struct clk_ops zynq_cpu_subclk_ops = {
+ .enable = zynq_cpu_subclk_enable,
+ .disable = zynq_cpu_subclk_disable,
+ .recalc_rate = zynq_cpu_subclk_recalc_rate,
+};
+
+static struct clk *zynq_cpu_subclk(const char *name,
+ enum zynq_cpu_subclk_which which,
+ void __iomem *clk_ctrl,
+ void __iomem *clk_621)
+{
+ static const char *subclk_parent = "cpu_clk";
+ struct zynq_cpu_subclk *subclk;
+ int ret;
+
+ subclk = xzalloc(sizeof(*subclk));
+
+ subclk->clk_ctrl = clk_ctrl;
+ subclk->clk_621 = clk_621;
+ subclk->which = which;
+ subclk->clk.name = name;
+ subclk->clk.ops = &zynq_cpu_subclk_ops;
+
+ subclk->clk.parent_names = &subclk_parent;
+ subclk->clk.num_parents = 1;
+
+ ret = clk_register(&subclk->clk);
+ if (ret) {
+ free(subclk);
+ return ERR_PTR(ret);
+ }
+
+ return &subclk->clk;
+}
+
+static int zynq_clock_probe(struct device_d *dev)
+{
+ void __iomem *slcr_base;
+ unsigned long ps_clk_rate = 33333330;
+
+ slcr_base = dev_request_mem_region(dev, 0);
+ if (!slcr_base)
+ return -EBUSY;
+
+ clks[ps_clk] = clk_fixed("ps_clk", ps_clk_rate);
+
+ clks[arm_pll] = zynq_pll_clk(ZYNQ_PLL_ARM, "arm_pll", slcr_base + 0x100);
+ clks[ddr_pll] = zynq_pll_clk(ZYNQ_PLL_DDR, "ddr_pll", slcr_base + 0x104);
+ clks[io_pll] = zynq_pll_clk(ZYNQ_PLL_IO, "io_pll", slcr_base + 0x108);
+
+ clks[uart_clk] = zynq_periph_clk("uart_clk", slcr_base + 0x154);
+
+ clks[uart0] = clk_gate("uart0", "uart_clk", slcr_base + 0x154, 0);
+ clks[uart1] = clk_gate("uart1", "uart_clk", slcr_base + 0x154, 1);
+
+ clks[cpu_clk] = zynq_cpu_clk("cpu_clk", slcr_base + 0x120);
+
+ clks[cpu_6x4x] = zynq_cpu_subclk("cpu_6x4x", CPU_SUBCLK_6X4X,
+ slcr_base + 0x120, slcr_base + 0x1C4);
+ clks[cpu_3x2x] = zynq_cpu_subclk("cpu_3x2x", CPU_SUBCLK_3X2X,
+ slcr_base + 0x120, slcr_base + 0x1C4);
+ clks[cpu_2x] = zynq_cpu_subclk("cpu_2x", CPU_SUBCLK_2X,
+ slcr_base + 0x120, slcr_base + 0x1C4);
+ clks[cpu_1x] = zynq_cpu_subclk("cpu_1x", CPU_SUBCLK_1X,
+ slcr_base + 0x120, slcr_base + 0x1C4);
+
+ clk_register_clkdev(clks[cpu_3x2x], NULL, "arm_smp_twd");
+ clk_register_clkdev(clks[uart0], NULL, "zynq_serial0");
+ clk_register_clkdev(clks[uart1], NULL, "zynq_serial1");
+
+ clkdev_add_physbase(clks[cpu_3x2x], CORTEXA9_SCU_TIMER_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[uart1], ZYNQ_UART1_BASE_ADDR, NULL);
+ return 0;
+}
+
+static __maybe_unused struct of_device_id zynq_clock_dt_ids[] = {
+ {
+ .compatible = "xlnx,zynq-clock",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d zynq_clock_driver = {
+ .probe = zynq_clock_probe,
+ .name = "zynq-clock",
+ .of_compatible = DRV_OF_COMPAT(zynq_clock_dt_ids),
+};
+
+static int zynq_clock_init(void)
+{
+ return platform_driver_register(&zynq_clock_driver);
+}
+postcore_initcall(zynq_clock_init);
diff --git a/arch/arm/mach-zynq/include/mach/clkdev.h b/arch/arm/mach-zynq/include/mach/clkdev.h
new file mode 100644
index 0000000..31f7035
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/clkdev.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+#endif
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 4/5] ARM: zynq: add zynq fsbl checksum script
2013-03-26 9:11 [PATCH v4 0/5] ARM: add support for Zynq Steffen Trumtrar
` (2 preceding siblings ...)
2013-03-26 9:11 ` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
@ 2013-03-26 9:11 ` Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v3 5/5] ARM: zynq: Add support for the Avnet Zedboard Steffen Trumtrar
` (2 subsequent siblings)
6 siblings, 0 replies; 17+ messages in thread
From: Steffen Trumtrar @ 2013-03-26 9:11 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
The bootrom only reads an image if the correct checksum is present in the
header. The calculation is pretty simple:
sum over all words from 0x20 to 0x44
Two of this words are the image length. That is why the checksum can not be
calculated until barebox_image_size is known.
The easiest solution is a program that has to be run after make.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
Changes since v2:
- rename to zynq_mkimage
- add to gitignores
- always pipe barebox through zynq_mkimage
- don't waste memory with malloc
- add license header
.gitignore | 1 +
arch/arm/Makefile | 8 +++++
scripts/.gitignore | 1 +
scripts/Makefile | 1 +
scripts/zynq_mkimage.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 97 insertions(+)
create mode 100644 scripts/zynq_mkimage.c
diff --git a/.gitignore b/.gitignore
index 064753d..d197196 100644
--- a/.gitignore
+++ b/.gitignore
@@ -36,6 +36,7 @@ barebox.netx
barebox.s5p
barebox.spi
barebox.ubl
+barebox.zynq
barebox.uimage
barebox.map
barebox-flash-image
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ceb45dc..5682e36 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -244,6 +244,14 @@ KBUILD_TARGET := barebox.spi
KBUILD_IMAGE := barebox.spi
endif
+barebox.zynq: $(KBUILD_BINARY)
+ $(Q)scripts/zynq_mkimage $< $@
+
+ifeq ($(machine-y),zynq)
+KBUILD_TARGET := barebox.zynq
+KBUILD_IMAGE := barebox.zynq
+endif
+
pbl := arch/arm/pbl
zbarebox.S zbarebox.bin zbarebox: barebox.bin
$(Q)$(MAKE) $(build)=$(pbl) $(pbl)/$@
diff --git a/scripts/.gitignore b/scripts/.gitignore
index 1ca6603..bff805d 100644
--- a/scripts/.gitignore
+++ b/scripts/.gitignore
@@ -7,3 +7,4 @@ mkimage
mkublheader
omap_signGP
omap4_usbboot
+zynq_mkimage
diff --git a/scripts/Makefile b/scripts/Makefile
index 08b325c..fd526e5 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -12,6 +12,7 @@ hostprogs-$(CONFIG_ARCH_NETX) += gen_netx_image
hostprogs-$(CONFIG_ARCH_OMAP) += omap_signGP mk-am35xx-spi-image
hostprogs-$(CONFIG_ARCH_S5PCxx) += s5p_cksum
hostprogs-$(CONFIG_ARCH_DAVINCI) += mkublheader
+hostprogs-$(CONFIG_ARCH_ZYNQ) += zynq_mkimage
HOSTLOADLIBES_omap4_usbboot = -lpthread
omap4_usbboot-objs := usb_linux.o omap4_usbboot.o
diff --git a/scripts/zynq_mkimage.c b/scripts/zynq_mkimage.c
new file mode 100644
index 0000000..a096b83
--- /dev/null
+++ b/scripts/zynq_mkimage.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <endian.h>
+#include <errno.h>
+#include <malloc.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/stat.h>
+
+static void usage(char *name)
+{
+ printf("Usage: %s barebox-flash-image <outfile>\n", name);
+}
+
+int main(int argc, char *argv[])
+{
+ FILE *ifile, *ofile;
+ unsigned int *buf;
+ const char *infile;
+ const char *outfile;
+ struct stat st;
+ unsigned int i;
+ unsigned long sum = 0;
+
+ if (argc != 3) {
+ usage(argv[0]);
+ exit(1);
+ }
+
+ infile = argv[1];
+ outfile = argv[2];
+
+ if (stat(infile, &st) == -1) {
+ perror("stat");
+ exit(EXIT_FAILURE);
+ }
+
+ buf = malloc(st.st_size);
+ if (!buf) {
+ fprintf(stderr, "Unable to allocate buffer\n");
+ return -1;
+ }
+ ifile = fopen(infile, "rb");
+ if (!ifile) {
+ fprintf(stderr, "Cannot open %s for reading\n",
+ infile);
+ free(buf);
+ exit(EXIT_FAILURE);
+ }
+ ofile = fopen(outfile, "wb");
+ if (!ofile) {
+ fprintf(stderr, "Cannot open %s for writing\n",
+ outfile);
+ fclose(ifile);
+ free(buf);
+ exit(EXIT_FAILURE);
+ }
+
+ fread(buf, 4, st.st_size, ifile);
+
+ for (i = 0x8; i < 0x12; i++)
+ sum += htole32(buf[i]);
+
+ sum = ~sum;
+ buf[i] = sum;
+
+ fwrite(buf, st.st_size / 4, 4, ofile);
+
+ fclose(ofile);
+ fclose(ifile);
+ free(buf);
+
+ return 0;
+}
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 5/5] ARM: zynq: Add support for the Avnet Zedboard
2013-03-26 9:11 [PATCH v4 0/5] ARM: add support for Zynq Steffen Trumtrar
` (3 preceding siblings ...)
2013-03-26 9:11 ` [PATCH v3 4/5] ARM: zynq: add zynq fsbl checksum script Steffen Trumtrar
@ 2013-03-26 9:11 ` Steffen Trumtrar
2013-03-26 9:21 ` [PATCH v4 0/5] ARM: add support for Zynq Michal Simek
2013-03-27 8:32 ` Sascha Hauer
6 siblings, 0 replies; 17+ messages in thread
From: Steffen Trumtrar @ 2013-03-26 9:11 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
The Avnet ZedBoard is an evalboard with a Zynq-7020 based MPSoC.
There is also a Digilent ZedBoard, that is the same but only for
academic customers.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
Changes since v2:
- use pbl image
- remove useless flash_header_start
arch/arm/boards/avnet-zedboard/Makefile | 3 +
arch/arm/boards/avnet-zedboard/board.c | 38 ++++
arch/arm/boards/avnet-zedboard/config.h | 4 +
.../boards/avnet-zedboard/env/init/config-board | 7 +
| 62 +++++
arch/arm/boards/avnet-zedboard/lowlevel.c | 252 +++++++++++++++++++++
arch/arm/configs/zedboard_defconfig | 49 ++++
7 files changed, 415 insertions(+)
create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
create mode 100644 arch/arm/boards/avnet-zedboard/board.c
create mode 100644 arch/arm/boards/avnet-zedboard/config.h
create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
create mode 100644 arch/arm/configs/zedboard_defconfig
diff --git a/arch/arm/boards/avnet-zedboard/Makefile b/arch/arm/boards/avnet-zedboard/Makefile
new file mode 100644
index 0000000..a2c3104
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/Makefile
@@ -0,0 +1,3 @@
+obj-y += board.o
+lwl-y += lowlevel.o
+lwl-y += flash_header.o
diff --git a/arch/arm/boards/avnet-zedboard/board.c b/arch/arm/boards/avnet-zedboard/board.c
new file mode 100644
index 0000000..4e3d5a5
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/board.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/armlinux.h>
+#include <common.h>
+#include <environment.h>
+#include <generated/mach-types.h>
+#include <init.h>
+#include <mach/devices.h>
+#include <mach/zynq7000-regs.h>
+#include <sizes.h>
+
+static int zedboard_mem_init(void)
+{
+ arm_add_mem_device("ram0", 0, SZ_512M);
+
+ return 0;
+}
+mem_initcall(zedboard_mem_init);
+
+static int zedboard_console_init(void)
+{
+ zynq_add_uart1();
+
+ return 0;
+}
+console_initcall(zedboard_console_init);
diff --git a/arch/arm/boards/avnet-zedboard/config.h b/arch/arm/boards/avnet-zedboard/config.h
new file mode 100644
index 0000000..ca15136
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/config.h
@@ -0,0 +1,4 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/avnet-zedboard/env/init/config-board b/arch/arm/boards/avnet-zedboard/env/init/config-board
new file mode 100644
index 0000000..9957653
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/env/init/config-board
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# board defaults, do not change in running system. Change /env/config
+# instead
+
+global.hostname=ZedBoard
+global.linux.bootargs.base="console=ttyPS1,115200"
--git a/arch/arm/boards/avnet-zedboard/flash_header.c b/arch/arm/boards/avnet-zedboard/flash_header.c
new file mode 100644
index 0000000..ea20524
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/flash_header.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/byteorder.h>
+#include <mach/zynq-flash-header.h>
+#include <mach/zynq7000-regs.h>
+#include <asm/barebox-arm-head.h>
+
+#define REG(a, v) { .addr = cpu_to_le32(a), .val = cpu_to_le32(v), }
+
+struct zynq_reg_entry __ps7reg_entry_section reg_entry[] = {
+ REG(ZYNQ_SLCR_UNLOCK, 0x0000DF0D),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_CLK_621_TRUE, 0x00000001),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_APER_CLK_CTRL, 0x01FC044D),
+
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028008),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CFG, 0x000FA220),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028010),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028011),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028010),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL, 0x00028000),
+
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E008),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CFG, 0x001452C0),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E010),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E011),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E010),
+ REG(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL, 0x0001E000),
+
+ REG(0xf8000150, 0x00000a03),
+
+ /* stop */
+ REG(0xFFFFFFFF, 0x00000000),
+};
+
+struct zynq_flash_header __flash_header_section flash_header = {
+ .width_det = WIDTH_DETECTION_MAGIC,
+ .image_id = IMAGE_IDENTIFICATION,
+ .enc_stat = 0x0,
+ .user = 0x0,
+ .flash_offset = 0x8c0,
+ .length = barebox_image_size,
+ .res0 = 0x0,
+ .start_of_exec = 0x0,
+ .total_len = barebox_image_size,
+ .res1 = 0x1,
+ .checksum = 0x0,
+ .res2 = 0x0,
+};
diff --git a/arch/arm/boards/avnet-zedboard/lowlevel.c b/arch/arm/boards/avnet-zedboard/lowlevel.c
new file mode 100644
index 0000000..b50886e
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/lowlevel.c
@@ -0,0 +1,252 @@
+/*
+ *
+ * (c) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <io.h>
+#include <asm/barebox-arm.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/zynq7000-regs.h>
+
+#define DCI_DONE (1 << 13)
+#define PLL_ARM_LOCK (1 << 0)
+#define PLL_DDR_LOCK (1 << 1)
+#define PLL_IO_LOCK (1 << 2)
+
+void __naked barebox_arm_reset_vector(void)
+{
+ /* open sesame */
+ writel(0x0000DF0D, ZYNQ_SLCR_UNLOCK);
+
+ /* turn on LD9 */
+ writel(0x00000200, 0xF800071C);
+ writel(0x00000080, 0xE000A204);
+ writel(0x00000080, 0xE000A000);
+
+ /* ps7_clock_init_data */
+ writel(0x1F000200, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_CLK_CTRL);
+ writel(0x00F00701, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DCI_CLK_CTRL);
+ writel(0x00002803, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_UART_CLK_CTRL);
+ writel(0x00000A03, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DBG_CLK_CTRL);
+ writel(0x00000501, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PCAP_CLK_CTRL);
+ writel(0x00000000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_TOPSW_CLK_CTRL);
+ writel(0x00100A00, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA0_CLK_CTRL);
+ writel(0x00100700, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA1_CLK_CTRL);
+ writel(0x00101400, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA2_CLK_CTRL);
+ writel(0x00101400, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_FPGA3_CLK_CTRL);
+ /* 6:2:1 mode */
+ writel(0x00000001, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_CLK_621_TRUE);
+ writel(0x01FC044D, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_APER_CLK_CTRL);
+
+ /* configure the PLLs */
+ /* ARM PLL */
+ writel(0x00028008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
+ writel(0x000FA220, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CFG);
+ writel(0x00028010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
+ writel(0x00028011, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
+ writel(0x00028010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
+
+ while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_ARM_LOCK))
+ ;
+ writel(0x00028000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_ARM_PLL_CTRL);
+
+ /* DDR PLL */
+ /* set to bypass mode */
+ writel(0x0001A018, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
+ /* assert reset */
+ writel(0x0001A019, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
+ /* set feedback divs */
+ writel(0x00020019, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
+ writel(0x0012C220, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CFG);
+ /* set ddr2xclk and ddr3xclk: 3,2 */
+ writel(0x0C200003, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_CLK_CTRL);
+ /* deassert reset */
+ writel(0x00020018, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
+ /* wait pll lock */
+ while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_DDR_LOCK))
+ ;
+ /* remove bypass mode */
+ writel(0x00020008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_DDR_PLL_CTRL);
+
+ /* IO PLL */
+ writel(0x0001E008, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
+ writel(0x001452C0, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CFG);
+ writel(0x0001E010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
+ writel(0x0001E011, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
+ writel(0x0001E010, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
+
+ while (!(readl(ZYNQ_CLOCK_CTRL_BASE + ZYNQ_PLL_STATUS) & PLL_IO_LOCK))
+ ;
+ writel(0x0001E000, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_IO_PLL_CTRL);
+
+ /*
+ * INP_TYPE[1:2] = {off, vref, diff, lvcmos}
+ * DCI_UPDATE[3], TERM_EN[4]
+ * DCI_TYPE[5:6] = {off, drive, res, term}
+ * IBUF_DISABLE_MODE[7] = {ibuf, ibuf_disable}
+ * TERM_DISABLE_MODE[8] = {always, dynamic}
+ * OUTPUT_EN[9:10] = {ibuf, res, res, obuf}
+ * PULLUP_EN[11]
+ */
+ writel(0x00000600, ZYNQ_DDRIOB_ADDR0);
+ writel(0x00000600, ZYNQ_DDRIOB_ADDR1);
+ writel(0x00000672, ZYNQ_DDRIOB_DATA0);
+ writel(0x00000672, ZYNQ_DDRIOB_DATA1);
+ writel(0x00000674, ZYNQ_DDRIOB_DIFF0);
+ writel(0x00000674, ZYNQ_DDRIOB_DIFF1);
+ writel(0x00000600, ZYNQ_DDRIOB_CLOCK);
+ /*
+ * Drive_P[0:6], Drive_N[7:13]
+ * Slew_P[14:18], Slew_N[19:23]
+ * GTL[24:26], RTerm[27:31]
+ */
+ writel(0x00D6861C, ZYNQ_DDRIOB_DRIVE_SLEW_ADDR);
+ writel(0x00F9861C, ZYNQ_DDRIOB_DRIVE_SLEW_DATA);
+ writel(0x00F9861C, ZYNQ_DDRIOB_DRIVE_SLEW_DIFF);
+ writel(0x00D6861C, ZYNQ_DDRIOB_DRIVE_SLEW_CLOCK);
+ /*
+ * VREF_INT_EN[0]
+ * VREF_SEL[1:4] = {0001=0.6V, 0100=0.75V, 1000=0.9V}
+ * VREF_EXT_EN[5:6] = {dis/dis, dis/en, en/dis, en/en}
+ * RES[7:8], REFIO_EN[9]
+ */
+ /* FIXME: Xilinx sets this to internal, but Zedboard should support
+ external VRef, too */
+ writel(0x00000E09, ZYNQ_DDRIOB_DDR_CTRL);
+ /*
+ * RESET[0], ENABLE[1]
+ * NREF_OPT1[6:7], NREF_OPT2[8:10], NREF_OPT4[11:13]
+ * PREF_OPT1[14:15], PREF_OPT2[17:19], UPDATE_CONTROL[20]
+ */
+ writel(0x00000021, ZYNQ_DDRIOB_DCI_CTRL);
+ writel(0x00000020, ZYNQ_DDRIOB_DCI_CTRL);
+ writel(0x00100823, ZYNQ_DDRIOB_DCI_CTRL);
+
+ while (!(readl(ZYNQ_DDRIOB_DCI_STATUS) & DCI_DONE))
+ ;
+
+ writel(0x0E00E07F, 0xF8007000);
+
+ /* ps7_ddr_init_data */
+ writel(0x00000080, 0XF8006000);
+ writel(0x00081081, 0XF8006004);
+ writel(0x03C0780F, 0XF8006008);
+ writel(0x02001001, 0XF800600C);
+ writel(0x00014001, 0XF8006010);
+ writel(0x0004159B, 0XF8006014);
+ writel(0x452460D2, 0XF8006018);
+ writel(0x720238E5, 0XF800601C);
+ writel(0x272872D0, 0XF8006020);
+ writel(0x0000003C, 0XF8006024);
+ writel(0x00002007, 0XF8006028);
+ writel(0x00000008, 0XF800602C);
+ writel(0x00040930, 0XF8006030);
+ writel(0x00010694, 0XF8006034);
+ writel(0x00000000, 0XF8006038);
+ writel(0x00000777, 0XF800603C);
+ writel(0xFFF00000, 0XF8006040);
+ writel(0x0FF66666, 0XF8006044);
+ writel(0x0003C248, 0XF8006048);
+ writel(0x77010800, 0XF8006050);
+ writel(0x00000101, 0XF8006058);
+ writel(0x00005003, 0XF800605C);
+ writel(0x0000003E, 0XF8006060);
+ writel(0x00020000, 0XF8006064);
+ writel(0x00284141, 0XF8006068);
+ writel(0x00001610, 0XF800606C);
+ writel(0x00008000, 0XF80060A0);
+ writel(0x10200802, 0XF80060A4);
+ writel(0x0690CB73, 0XF80060A8);
+ writel(0x000001FE, 0XF80060AC);
+ writel(0x1CFFFFFF, 0XF80060B0);
+ writel(0x00000200, 0XF80060B4);
+ writel(0x00200066, 0XF80060B8);
+ writel(0x00000000, 0XF80060BC);
+ writel(0x00000000, 0XF80060C4);
+ writel(0x00000000, 0XF80060C8);
+ writel(0x00000000, 0XF80060DC);
+ writel(0x00000000, 0XF80060F0);
+ writel(0x00000008, 0XF80060F4);
+ writel(0x00000000, 0XF8006114);
+ writel(0x40000001, 0XF8006118);
+ writel(0x40000001, 0XF800611C);
+ writel(0x40000001, 0XF8006120);
+ writel(0x40000001, 0XF8006124);
+ writel(0x00033C03, 0XF800612C);
+ writel(0x00034003, 0XF8006130);
+ writel(0x0002F400, 0XF8006134);
+ writel(0x00030400, 0XF8006138);
+ writel(0x00000035, 0XF8006140);
+ writel(0x00000035, 0XF8006144);
+ writel(0x00000035, 0XF8006148);
+ writel(0x00000035, 0XF800614C);
+ writel(0x00000083, 0XF8006154);
+ writel(0x00000083, 0XF8006158);
+ writel(0x0000007F, 0XF800615C);
+ writel(0x00000078, 0XF8006160);
+ writel(0x00000124, 0XF8006168);
+ writel(0x00000125, 0XF800616C);
+ writel(0x00000112, 0XF8006170);
+ writel(0x00000116, 0XF8006174);
+ writel(0x000000C3, 0XF800617C);
+ writel(0x000000C3, 0XF8006180);
+ writel(0x000000BF, 0XF8006184);
+ writel(0x000000B8, 0XF8006188);
+ writel(0x10040080, 0XF8006190);
+ writel(0x0001FC82, 0XF8006194);
+ writel(0x00000000, 0XF8006204);
+ writel(0x000803FF, 0XF8006208);
+ writel(0x000803FF, 0XF800620C);
+ writel(0x000803FF, 0XF8006210);
+ writel(0x000803FF, 0XF8006214);
+ writel(0x000003FF, 0XF8006218);
+ writel(0x000003FF, 0XF800621C);
+ writel(0x000003FF, 0XF8006220);
+ writel(0x000003FF, 0XF8006224);
+ writel(0x00000000, 0XF80062A8);
+ writel(0x00000000, 0XF80062AC);
+ writel(0x00005125, 0XF80062B0);
+ writel(0x000012A8, 0XF80062B4);
+ writel(0x00000081, 0XF8006000);
+
+ /* poor mans pinctrl */
+ writel(0x000002E0, ZYNQ_MIO_BASE + 0xC0);
+ writel(0x000002E1, ZYNQ_MIO_BASE + 0xC4);
+ /* UART1 pinmux */
+ writel(0x000002E1, ZYNQ_MIO_BASE + 0xC8);
+ writel(0x000002E0, ZYNQ_MIO_BASE + 0xCC);
+
+ /* poor mans clkctrl */
+ writel(0x00001403, ZYNQ_CLOCK_CTRL_BASE + ZYNQ_UART_CLK_CTRL);
+
+ writel(0x00000001, 0xf8000138);
+ writel(0x00100801, 0xf8000140);
+ writel(0x00000302, 0xf8000740);
+ writel(0x00000302, 0xf8000744);
+ writel(0x00000302, 0xf8000748);
+ writel(0x00000302, 0xf800074C);
+ writel(0x00000302, 0xf8000750);
+ writel(0x00000302, 0xf8000754);
+
+ writel(0x00000001, 0xf8000B00);
+
+ /* lock up. secure, secure */
+ writel(0x0000767B, ZYNQ_SLCR_LOCK);
+
+ arm_cpu_lowlevel_init();
+ barebox_arm_entry(0, SZ_512M, 0);
+}
diff --git a/arch/arm/configs/zedboard_defconfig b/arch/arm/configs/zedboard_defconfig
new file mode 100644
index 0000000..773177c
--- /dev/null
+++ b/arch/arm/configs/zedboard_defconfig
@@ -0,0 +1,49 @@
+CONFIG_ARCH_ZYNQ=y
+CONFIG_AEABI=y
+CONFIG_CMD_ARM_MMUINFO=y
+CONFIG_ARM_UNWIND=y
+CONFIG_PBL_IMAGE=y
+CONFIG_MMU=y
+CONFIG_STACK_SIZE=0xf000
+CONFIG_MALLOC_SIZE=0x8000000
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_LONGHELP=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/avnet-zedboard/env"
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_DIRNAME=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_READLINK=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_OFTREE_PROBE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_CLK=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+# CONFIG_SPI is not set
+CONFIG_FS_TFTP=y
+CONFIG_DIGEST=y
+CONFIG_MD5=y
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v4 0/5] ARM: add support for Zynq
2013-03-26 9:11 [PATCH v4 0/5] ARM: add support for Zynq Steffen Trumtrar
` (4 preceding siblings ...)
2013-03-26 9:11 ` [PATCH v3 5/5] ARM: zynq: Add support for the Avnet Zedboard Steffen Trumtrar
@ 2013-03-26 9:21 ` Michal Simek
2013-03-26 9:33 ` Steffen Trumtrar
2013-03-26 10:22 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-27 8:32 ` Sascha Hauer
6 siblings, 2 replies; 17+ messages in thread
From: Michal Simek @ 2013-03-26 9:21 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
Hi Steffen,
On 03/26/2013 10:11 AM, Steffen Trumtrar wrote:
> Hi!
>
> This is mostly a repost of v3. Only changes are in 4/5.
> The final image now gets always piped through zynq_mkimage. This is needed
> anyway, so do it always.
> This tool will eventually replace all the flash_header linker stuff, although
> it is pretty simple on the Zynq.
I have signed to barebox mailing list today and I see that in the right time.
It is little bit messy what you have sent.
It is mix of v2/v3/v4 patches where it is not clear which version I should try.
Can you please resend the whole patchset as v5?
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v4 0/5] ARM: add support for Zynq
2013-03-26 9:21 ` [PATCH v4 0/5] ARM: add support for Zynq Michal Simek
@ 2013-03-26 9:33 ` Steffen Trumtrar
2013-03-26 9:38 ` Michal Simek
2013-03-26 10:22 ` Jean-Christophe PLAGNIOL-VILLARD
1 sibling, 1 reply; 17+ messages in thread
From: Steffen Trumtrar @ 2013-03-26 9:33 UTC (permalink / raw)
To: Michal Simek; +Cc: barebox
On Tue, Mar 26, 2013 at 10:21:01AM +0100, Michal Simek wrote:
> Hi Steffen,
>
> On 03/26/2013 10:11 AM, Steffen Trumtrar wrote:
> >Hi!
> >
> >This is mostly a repost of v3. Only changes are in 4/5.
> >The final image now gets always piped through zynq_mkimage. This is needed
> >anyway, so do it always.
> >This tool will eventually replace all the flash_header linker stuff, although
> >it is pretty simple on the Zynq.
>
> I have signed to barebox mailing list today and I see that in the right time.
> It is little bit messy what you have sent.
> It is mix of v2/v3/v4 patches where it is not clear which version I should try.
>
> Can you please resend the whole patchset as v5?
>
Hi,
I'm actually not sure if I like the mix myself, but you gotta try stuff :-)
The series is the latest and greatest and some patches just didn't change.
But it seems to confuse more than it helps.
So, just take the series as is, please. Sascha is okay with the patches and
will take them (I hope he doesn't change his mind in the meantime :-))
Sorry for the confusion.
Regards,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v4 0/5] ARM: add support for Zynq
2013-03-26 9:33 ` Steffen Trumtrar
@ 2013-03-26 9:38 ` Michal Simek
0 siblings, 0 replies; 17+ messages in thread
From: Michal Simek @ 2013-03-26 9:38 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
2013/3/26 Steffen Trumtrar <s.trumtrar@pengutronix.de>:
> On Tue, Mar 26, 2013 at 10:21:01AM +0100, Michal Simek wrote:
>> Hi Steffen,
>>
>> On 03/26/2013 10:11 AM, Steffen Trumtrar wrote:
>> >Hi!
>> >
>> >This is mostly a repost of v3. Only changes are in 4/5.
>> >The final image now gets always piped through zynq_mkimage. This is needed
>> >anyway, so do it always.
>> >This tool will eventually replace all the flash_header linker stuff, although
>> >it is pretty simple on the Zynq.
>>
>> I have signed to barebox mailing list today and I see that in the right time.
>> It is little bit messy what you have sent.
>> It is mix of v2/v3/v4 patches where it is not clear which version I should try.
>>
>> Can you please resend the whole patchset as v5?
>>
>
> Hi,
>
> I'm actually not sure if I like the mix myself, but you gotta try stuff :-)
> The series is the latest and greatest and some patches just didn't change.
> But it seems to confuse more than it helps.
> So, just take the series as is, please. Sascha is okay with the patches and
> will take them (I hope he doesn't change his mind in the meantime :-))
> Sorry for the confusion.
Interesting working style. From my point of view this is really problematic
because you it is just confusing. But ok if others are ok with this workflow.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v4 0/5] ARM: add support for Zynq
2013-03-26 9:21 ` [PATCH v4 0/5] ARM: add support for Zynq Michal Simek
2013-03-26 9:33 ` Steffen Trumtrar
@ 2013-03-26 10:22 ` Jean-Christophe PLAGNIOL-VILLARD
1 sibling, 0 replies; 17+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-03-26 10:22 UTC (permalink / raw)
To: Michal Simek; +Cc: barebox, Steffen Trumtrar
On 10:21 Tue 26 Mar , Michal Simek wrote:
> Hi Steffen,
>
> On 03/26/2013 10:11 AM, Steffen Trumtrar wrote:
> >Hi!
> >
> >This is mostly a repost of v3. Only changes are in 4/5.
> >The final image now gets always piped through zynq_mkimage. This is needed
> >anyway, so do it always.
> >This tool will eventually replace all the flash_header linker stuff, although
> >it is pretty simple on the Zynq.
>
> I have signed to barebox mailing list today and I see that in the right time.
> It is little bit messy what you have sent.
> It is mix of v2/v3/v4 patches where it is not clear which version I should try.
>
> Can you please resend the whole patchset as v5?
agreed just send a v5 no mix
Best Regards,
J.
>
> Thanks,
> Michal
>
> --
> Michal Simek, Ing. (M.Eng)
> w: www.monstr.eu p: +42-0-721842854
> Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
> Microblaze U-BOOT custodian
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v3 2/5] ARM: zynq: Add new architecture zynq
2013-03-26 9:11 ` [PATCH v3 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
@ 2013-03-26 13:19 ` Josh Cartwright
2013-03-26 13:28 ` Steffen Trumtrar
0 siblings, 1 reply; 17+ messages in thread
From: Josh Cartwright @ 2013-03-26 13:19 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
A few comments below, but otherwise: nice work.
On Tue, Mar 26, 2013 at 10:11:23AM +0100, Steffen Trumtrar wrote:
> Add basic support for the Xilinx Zynq-7000 EPP architecture.
> The Zynq-7000 is an embedded processing platform that combines a Cortex A9
> dualcore MPSoC with an Artix-7 FPGA.
>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
>
> Changes since v2:
> - don't force serial driver in Kconfig
> - remove MACH_HAS_LOWLEVEL_INIT
> - use (void __iomem *) in debug_ll.h
> - remove zynq_add_device inline function
> - use resource_size_t instead of void *
> - use __le32 consistently in zynq-flash-header.h
> - remove useless flash_header_start section
[..]
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index fcb2969..ceb45dc 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -64,6 +64,7 @@ machine-$(CONFIG_ARCH_PXA) := pxa
> machine-$(CONFIG_ARCH_SAMSUNG) := samsung
> machine-$(CONFIG_ARCH_VERSATILE) := versatile
> machine-$(CONFIG_ARCH_TEGRA) := tegra
> +machine-$(CONFIG_ARCH_ZYNQ) := zynq
>
> # Board directory name. This list is sorted alphanumerically
> # by CONFIG_* macro name.
> @@ -157,6 +158,7 @@ board-$(CONFIG_MACH_SABRELITE) := freescale-mx6-sabrelite
> board-$(CONFIG_MACH_TX53) := karo-tx53
> board-$(CONFIG_MACH_GUF_VINCELL) := guf-vincell
> board-$(CONFIG_MACH_EFIKA_MX_SMARTBOOK) := efika-mx-smartbook
> +board-$(CONFIG_MACH_ZEDBOARD) := avnet-zedboard
> machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
>
> diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
> new file mode 100644
> index 0000000..5bbd648
> --- /dev/null
> +++ b/arch/arm/mach-zynq/Kconfig
> @@ -0,0 +1,38 @@
> +if ARCH_ZYNQ
Not sure how much we care here, but with the order of the patchset the
way it is, after this one, it will be possible to select the ZedBoard,
even though all of the other support files get added only in the last
patch.
> +
> +config ARCH_TEXT_BASE
> + hex
> + default 0x1ff00000 if MACH_ZEDBOARD
> +
> +config ZYNQ_DEBUG_LL_UART_BASE
> + hex
> + default 0xe0001000 if MACH_ZEDBOARD
> +
> +config BOARDINFO
> + default "ZedBoard" if MACH_ZEDBOARD
> +
> +choice
> + prompt "Xilinx Zynq type board"
> +
> +config ARCH_ZYNQ7000
> + bool "Zynq-7000"
> + select CPU_V7
> + select CLKDEV_LOOKUP
> + select COMMON_CLK
> + select ARM_SMP_TWD
> +
> +endchoice
> +
> +if ARCH_ZYNQ7000
> +
> +choice
> + prompt "Zynq-7000 Board Type"
> +
> +config MACH_ZEDBOARD
> + bool "Avnet Zynq-7000 ZedBoard"
> + select DRIVER_SERIAL_CADENCE
> +
> +endchoice
> +endif
> +
> +endif
[..]
> diff --git a/arch/arm/mach-zynq/include/mach/zynq-flash-header.h b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> new file mode 100644
> index 0000000..3b67e55
> --- /dev/null
> +++ b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> @@ -0,0 +1,38 @@
> +#ifndef __MACH_FLASH_HEADER_H
> +#define __MACH_FLASH_HEADER_H
> +
> +#include <asm-generic/sections.h>
> +
> +#define __flash_header_section __section(.flash_header_0x0)
> +#define __ps7reg_entry_section __section(.ps7reg_entry_0x0A0)
> +#define __image_len_section __section(.image_len_0x08c0)
> +#define FLASH_HEADER_OFFSET 0x0
> +#define IMAGE_OFFSET 0x8c0
> +
> +#define DEST_BASE 0x8c0
> +#define FLASH_HEADER_BASE (DEST_BASE + FLASH_HEADER_OFFSET)
> +
> +struct zynq_reg_entry {
> + __le32 addr;
> + __le32 val;
> +};
> +
> +#define WIDTH_DETECTION_MAGIC 0xAA995566
> +#define IMAGE_IDENTIFICATION 0x584C4E58 /* "XLNX" */
> +
> +struct zynq_flash_header {
> + __le32 width_det;
> + __le32 image_id;
> + __le32 enc_stat;
> + __le32 user;
> + __le32 flash_offset;
> + __le32 length;
> + __le32 res0;
> + __le32 start_of_exec;
> + __le32 total_len;
> + __le32 res1;
> + __le32 checksum;
> + __le32 res2;
> +};
One thing I found during my testing/debugging to be useful is to have a
way to turn off the flash header, to get a header-less barebox.bin I
could use JTAG to load on the board. (I realize I could have done used
it _with_ the flash header and set the PC up at 0x8c0, but this was
easier).
It would be nice if there was a headerless binary left as a build
artifact that could be used for this purpose.
Josh
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000
2013-03-26 9:11 ` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
@ 2013-03-26 13:20 ` Josh Cartwright
2013-03-26 13:25 ` Josh Cartwright
0 siblings, 1 reply; 17+ messages in thread
From: Josh Cartwright @ 2013-03-26 13:20 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On Tue, Mar 26, 2013 at 10:11:24AM +0100, Steffen Trumtrar wrote:
> This adds support for the clocktree on zynq7000 SoCs.
> The patch is based on clocks.c from the larger patch
> ARM: zynq: add suppport for Zynq 7000 SoC
> by Josh Cartwright.
>
> The driver in that patch is converted to a platform_driver and code to
> enable plls was added.
>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-off-by: Josh Cartwright <joshc@eso.teric.us>
> ---
> arch/arm/mach-zynq/clk-zynq7000.c | 417 +++++++++++++++++++++++++++++++
> arch/arm/mach-zynq/include/mach/clkdev.h | 6 +
> 2 files changed, 423 insertions(+)
> create mode 100644 arch/arm/mach-zynq/clk-zynq7000.c
> create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h
>
[..]
> diff --git a/arch/arm/mach-zynq/include/mach/clkdev.h b/arch/arm/mach-zynq/include/mach/clkdev.h
> new file mode 100644
> index 0000000..31f7035
> --- /dev/null
> +++ b/arch/arm/mach-zynq/include/mach/clkdev.h
> @@ -0,0 +1,6 @@
> +#ifndef __ASM_MACH_CLKDEV_H
> +#define __ASM_MACH_CLKDEV_H
> +
> +#define __clk_get(clk) ({ 1; })
> +#define __clk_put(clk) do { } while (0)
> +#endif
I saw Sascha posted a patch removing these, so depending on when this
lands this may need cleaned up.
Josh
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000
2013-03-26 13:20 ` Josh Cartwright
@ 2013-03-26 13:25 ` Josh Cartwright
2013-03-26 14:20 ` Michal Simek
0 siblings, 1 reply; 17+ messages in thread
From: Josh Cartwright @ 2013-03-26 13:25 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On Tue, Mar 26, 2013 at 08:20:15AM -0500, Josh Cartwright wrote:
> On Tue, Mar 26, 2013 at 10:11:24AM +0100, Steffen Trumtrar wrote:
> > This adds support for the clocktree on zynq7000 SoCs.
> > The patch is based on clocks.c from the larger patch
> > ARM: zynq: add suppport for Zynq 7000 SoC
> > by Josh Cartwright.
> >
> > The driver in that patch is converted to a platform_driver and code to
> > enable plls was added.
> >
> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
>
> Reviewed-off-by: Josh Cartwright <joshc@eso.teric.us>
Heh, clearly I meant Reviewed-by: . I should stop reading my email
before my morning coffee. :)
Josh
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v3 2/5] ARM: zynq: Add new architecture zynq
2013-03-26 13:19 ` Josh Cartwright
@ 2013-03-26 13:28 ` Steffen Trumtrar
0 siblings, 0 replies; 17+ messages in thread
From: Steffen Trumtrar @ 2013-03-26 13:28 UTC (permalink / raw)
To: Josh Cartwright; +Cc: barebox
On Tue, Mar 26, 2013 at 08:19:54AM -0500, Josh Cartwright wrote:
> A few comments below, but otherwise: nice work.
>
> On Tue, Mar 26, 2013 at 10:11:23AM +0100, Steffen Trumtrar wrote:
> > Add basic support for the Xilinx Zynq-7000 EPP architecture.
> > The Zynq-7000 is an embedded processing platform that combines a Cortex A9
> > dualcore MPSoC with an Artix-7 FPGA.
> >
> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > ---
> >
> > Changes since v2:
> > - don't force serial driver in Kconfig
> > - remove MACH_HAS_LOWLEVEL_INIT
> > - use (void __iomem *) in debug_ll.h
> > - remove zynq_add_device inline function
> > - use resource_size_t instead of void *
> > - use __le32 consistently in zynq-flash-header.h
> > - remove useless flash_header_start section
> [..]
> > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > index fcb2969..ceb45dc 100644
> > --- a/arch/arm/Makefile
> > +++ b/arch/arm/Makefile
> > @@ -64,6 +64,7 @@ machine-$(CONFIG_ARCH_PXA) := pxa
> > machine-$(CONFIG_ARCH_SAMSUNG) := samsung
> > machine-$(CONFIG_ARCH_VERSATILE) := versatile
> > machine-$(CONFIG_ARCH_TEGRA) := tegra
> > +machine-$(CONFIG_ARCH_ZYNQ) := zynq
> >
> > # Board directory name. This list is sorted alphanumerically
> > # by CONFIG_* macro name.
> > @@ -157,6 +158,7 @@ board-$(CONFIG_MACH_SABRELITE) := freescale-mx6-sabrelite
> > board-$(CONFIG_MACH_TX53) := karo-tx53
> > board-$(CONFIG_MACH_GUF_VINCELL) := guf-vincell
> > board-$(CONFIG_MACH_EFIKA_MX_SMARTBOOK) := efika-mx-smartbook
> > +board-$(CONFIG_MACH_ZEDBOARD) := avnet-zedboard
> > machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
> >
> > diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
> > new file mode 100644
> > index 0000000..5bbd648
> > --- /dev/null
> > +++ b/arch/arm/mach-zynq/Kconfig
> > @@ -0,0 +1,38 @@
> > +if ARCH_ZYNQ
>
> Not sure how much we care here, but with the order of the patchset the
> way it is, after this one, it will be possible to select the ZedBoard,
> even though all of the other support files get added only in the last
> patch.
>
> > +
> > +config ARCH_TEXT_BASE
> > + hex
> > + default 0x1ff00000 if MACH_ZEDBOARD
> > +
> > +config ZYNQ_DEBUG_LL_UART_BASE
> > + hex
> > + default 0xe0001000 if MACH_ZEDBOARD
> > +
> > +config BOARDINFO
> > + default "ZedBoard" if MACH_ZEDBOARD
> > +
> > +choice
> > + prompt "Xilinx Zynq type board"
> > +
> > +config ARCH_ZYNQ7000
> > + bool "Zynq-7000"
> > + select CPU_V7
> > + select CLKDEV_LOOKUP
> > + select COMMON_CLK
> > + select ARM_SMP_TWD
> > +
> > +endchoice
> > +
> > +if ARCH_ZYNQ7000
> > +
> > +choice
> > + prompt "Zynq-7000 Board Type"
> > +
> > +config MACH_ZEDBOARD
> > + bool "Avnet Zynq-7000 ZedBoard"
> > + select DRIVER_SERIAL_CADENCE
> > +
> > +endchoice
> > +endif
> > +
> > +endif
> [..]
> > diff --git a/arch/arm/mach-zynq/include/mach/zynq-flash-header.h b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> > new file mode 100644
> > index 0000000..3b67e55
> > --- /dev/null
> > +++ b/arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> > @@ -0,0 +1,38 @@
> > +#ifndef __MACH_FLASH_HEADER_H
> > +#define __MACH_FLASH_HEADER_H
> > +
> > +#include <asm-generic/sections.h>
> > +
> > +#define __flash_header_section __section(.flash_header_0x0)
> > +#define __ps7reg_entry_section __section(.ps7reg_entry_0x0A0)
> > +#define __image_len_section __section(.image_len_0x08c0)
> > +#define FLASH_HEADER_OFFSET 0x0
> > +#define IMAGE_OFFSET 0x8c0
> > +
> > +#define DEST_BASE 0x8c0
> > +#define FLASH_HEADER_BASE (DEST_BASE + FLASH_HEADER_OFFSET)
> > +
> > +struct zynq_reg_entry {
> > + __le32 addr;
> > + __le32 val;
> > +};
> > +
> > +#define WIDTH_DETECTION_MAGIC 0xAA995566
> > +#define IMAGE_IDENTIFICATION 0x584C4E58 /* "XLNX" */
> > +
> > +struct zynq_flash_header {
> > + __le32 width_det;
> > + __le32 image_id;
> > + __le32 enc_stat;
> > + __le32 user;
> > + __le32 flash_offset;
> > + __le32 length;
> > + __le32 res0;
> > + __le32 start_of_exec;
> > + __le32 total_len;
> > + __le32 res1;
> > + __le32 checksum;
> > + __le32 res2;
> > +};
>
> One thing I found during my testing/debugging to be useful is to have a
> way to turn off the flash header, to get a header-less barebox.bin I
> could use JTAG to load on the board. (I realize I could have done used
> it _with_ the flash header and set the PC up at 0x8c0, but this was
> easier).
>
> It would be nice if there was a headerless binary left as a build
> artifact that could be used for this purpose.
>
Yes. Sascha suggested to remove the flash_header and generate the whole
thing with the zynq_mkimage tool. But atm I don't really feel the need to
do so, as the header is simple in comparison to other SoCs. And as you
said, you can jump over the header.
Regards,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000
2013-03-26 13:25 ` Josh Cartwright
@ 2013-03-26 14:20 ` Michal Simek
0 siblings, 0 replies; 17+ messages in thread
From: Michal Simek @ 2013-03-26 14:20 UTC (permalink / raw)
To: Josh Cartwright; +Cc: barebox, Steffen Trumtrar
2013/3/26 Josh Cartwright <joshc@eso.teric.us>:
> On Tue, Mar 26, 2013 at 08:20:15AM -0500, Josh Cartwright wrote:
>> On Tue, Mar 26, 2013 at 10:11:24AM +0100, Steffen Trumtrar wrote:
>> > This adds support for the clocktree on zynq7000 SoCs.
>> > The patch is based on clocks.c from the larger patch
>> > ARM: zynq: add suppport for Zynq 7000 SoC
>> > by Josh Cartwright.
>> >
>> > The driver in that patch is converted to a platform_driver and code to
>> > enable plls was added.
>> >
>> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
>>
>> Reviewed-off-by: Josh Cartwright <joshc@eso.teric.us>
>
> Heh, clearly I meant Reviewed-by: . I should stop reading my email
> before my morning coffee. :)
:-)
M
--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v4 0/5] ARM: add support for Zynq
2013-03-26 9:11 [PATCH v4 0/5] ARM: add support for Zynq Steffen Trumtrar
` (5 preceding siblings ...)
2013-03-26 9:21 ` [PATCH v4 0/5] ARM: add support for Zynq Michal Simek
@ 2013-03-27 8:32 ` Sascha Hauer
6 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2013-03-27 8:32 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On Tue, Mar 26, 2013 at 10:11:21AM +0100, Steffen Trumtrar wrote:
> Hi!
>
> This is mostly a repost of v3. Only changes are in 4/5.
> The final image now gets always piped through zynq_mkimage. This is needed
> anyway, so do it always.
> This tool will eventually replace all the flash_header linker stuff, although
> it is pretty simple on the Zynq.
>
> Regards,
> Steffen
>
> Steffen Trumtrar (5):
> serial: Add driver for Cadence UART
> ARM: zynq: Add new architecture zynq
> ARM: zynq: add clk support for zynq7000
> ARM: zynq: add zynq fsbl checksum script
> ARM: zynq: Add support for the Avnet Zedboard
Applied, thanks.
The version numbers get lost while applying anyway, so I hope this won't
be an issue.
Sascha
>
> .gitignore | 1 +
> arch/arm/Kconfig | 5 +
> arch/arm/Makefile | 10 +
> arch/arm/boards/avnet-zedboard/Makefile | 3 +
> arch/arm/boards/avnet-zedboard/board.c | 38 ++
> arch/arm/boards/avnet-zedboard/config.h | 4 +
> .../boards/avnet-zedboard/env/init/config-board | 7 +
> arch/arm/boards/avnet-zedboard/flash_header.c | 62 +++
> arch/arm/boards/avnet-zedboard/lowlevel.c | 252 +++++++++++++
> arch/arm/configs/zedboard_defconfig | 49 +++
> arch/arm/mach-zynq/Kconfig | 38 ++
> arch/arm/mach-zynq/Makefile | 1 +
> arch/arm/mach-zynq/clk-zynq7000.c | 417 +++++++++++++++++++++
> arch/arm/mach-zynq/devices.c | 8 +
> arch/arm/mach-zynq/include/mach/barebox.lds.h | 8 +
> arch/arm/mach-zynq/include/mach/clkdev.h | 6 +
> arch/arm/mach-zynq/include/mach/debug_ll.h | 37 ++
> arch/arm/mach-zynq/include/mach/devices.h | 13 +
> .../arm/mach-zynq/include/mach/zynq-flash-header.h | 38 ++
> arch/arm/mach-zynq/include/mach/zynq7000-regs.h | 132 +++++++
> arch/arm/mach-zynq/zynq.c | 56 +++
> drivers/serial/Kconfig | 5 +
> drivers/serial/Makefile | 1 +
> drivers/serial/serial_cadence.c | 307 +++++++++++++++
> include/asm-generic/barebox.lds.h | 3 +-
> scripts/.gitignore | 1 +
> scripts/Makefile | 1 +
> scripts/zynq_mkimage.c | 86 +++++
> 28 files changed, 1588 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
> create mode 100644 arch/arm/boards/avnet-zedboard/board.c
> create mode 100644 arch/arm/boards/avnet-zedboard/config.h
> create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
> create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
> create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
> create mode 100644 arch/arm/configs/zedboard_defconfig
> create mode 100644 arch/arm/mach-zynq/Kconfig
> create mode 100644 arch/arm/mach-zynq/Makefile
> create mode 100644 arch/arm/mach-zynq/clk-zynq7000.c
> create mode 100644 arch/arm/mach-zynq/devices.c
> create mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h
> create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h
> create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h
> create mode 100644 arch/arm/mach-zynq/include/mach/devices.h
> create mode 100644 arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-regs.h
> create mode 100644 arch/arm/mach-zynq/zynq.c
> create mode 100644 drivers/serial/serial_cadence.c
> create mode 100644 scripts/zynq_mkimage.c
>
> --
> 1.8.2.rc2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 1/5] serial: Add driver for Cadence UART
2013-03-25 13:02 [PATCH v3 " Steffen Trumtrar
@ 2013-03-25 13:02 ` Steffen Trumtrar
0 siblings, 0 replies; 17+ messages in thread
From: Steffen Trumtrar @ 2013-03-25 13:02 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
Support for Cadence UART core.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
Changes since v2:
- remove superfluous Kconfig option
- add help text to Kconfig option
drivers/serial/Kconfig | 5 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_cadence.c | 307 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 313 insertions(+)
create mode 100644 drivers/serial/serial_cadence.c
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index f61d670..73cb9f8 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -113,4 +113,9 @@ config DRIVER_SERIAL_OMAP4_USBBOOT
help
Enable this to get console support over the usb bus used to boot an OMAP4
+config DRIVER_SERIAL_CADENCE
+ bool "Cadence UART driver"
+ help
+ Say Y here if you have a Cadence serial IP core.
+
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 893e282..963a7df 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_DRIVER_SERIAL_ALTERA) += serial_altera.o
obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG) += serial_altera_jtag.o
obj-$(CONFIG_DRIVER_SERIAL_PXA) += serial_pxa.o
obj-$(CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT) += serial_omap4_usbboot.o
+obj-$(CONFIG_DRIVER_SERIAL_CADENCE) += serial_cadence.o
diff --git a/drivers/serial/serial_cadence.c b/drivers/serial/serial_cadence.c
new file mode 100644
index 0000000..c29c391
--- /dev/null
+++ b/drivers/serial/serial_cadence.c
@@ -0,0 +1,307 @@
+/*
+ * (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <malloc.h>
+#include <notifier.h>
+#include <io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#define CADENCE_UART_CONTROL 0x00
+#define CADENCE_UART_MODE 0x04
+#define CADENCE_UART_BAUD_GEN 0x18
+#define CADENCE_UART_CHANNEL_STS 0x2C
+#define CADENCE_UART_RXTXFIFO 0x30
+#define CADENCE_UART_BAUD_DIV 0x34
+
+#define CADENCE_CTRL_RXRES (1 << 0)
+#define CADENCE_CTRL_TXRES (1 << 1)
+#define CADENCE_CTRL_RXEN (1 << 2)
+#define CADENCE_CTRL_RXDIS (1 << 3)
+#define CADENCE_CTRL_TXEN (1 << 4)
+#define CADENCE_CTRL_TXDIS (1 << 5)
+#define CADENCE_CTRL_RSTTO (1 << 6)
+#define CADENCE_CTRL_STTBRK (1 << 7)
+#define CADENCE_CTRL_STPBRK (1 << 8)
+
+#define CADENCE_MODE_CLK_REF (0 << 0)
+#define CADENCE_MODE_CLK_REF_DIV (1 << 0)
+#define CADENCE_MODE_CHRL_6 (3 << 1)
+#define CADENCE_MODE_CHRL_7 (2 << 1)
+#define CADENCE_MODE_CHRL_8 (0 << 1)
+#define CADENCE_MODE_PAR_EVEN (0 << 3)
+#define CADENCE_MODE_PAR_ODD (1 << 3)
+#define CADENCE_MODE_PAR_SPACE (2 << 3)
+#define CADENCE_MODE_PAR_MARK (3 << 3)
+#define CADENCE_MODE_PAR_NONE (4 << 3)
+
+#define CADENCE_STS_REMPTY (1 << 1)
+#define CADENCE_STS_RFUL (1 << 2)
+#define CADENCE_STS_TEMPTY (1 << 3)
+#define CADENCE_STS_TFUL (1 << 4)
+
+/*
+ * create default values for different platforms
+ */
+struct cadence_serial_devtype_data {
+ u32 ctrl;
+ u32 mode;
+};
+
+static struct cadence_serial_devtype_data cadence_r1p08_data = {
+ .ctrl = CADENCE_CTRL_RXEN | CADENCE_CTRL_TXEN,
+ .mode = CADENCE_MODE_CLK_REF | CADENCE_MODE_CHRL_8 | CADENCE_MODE_PAR_NONE,
+};
+
+struct cadence_serial_priv {
+ struct console_device cdev;
+ int baudrate;
+ struct notifier_block notify;
+ void __iomem *regs;
+ struct clk *clk;
+ struct cadence_serial_devtype_data *devtype;
+};
+
+static int cadence_serial_reset(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ /* Soft-Reset Tx/Rx paths */
+ writel(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES, priv->regs +
+ CADENCE_UART_CONTROL);
+
+ while (readl(priv->regs + CADENCE_UART_CONTROL) &
+ (CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES))
+ ;
+
+ return 0;
+}
+
+static int cadence_serial_setbaudrate(struct console_device *cdev, int baudrate)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+ unsigned int gen, div;
+ int calc_rate;
+ unsigned long clk;
+ int error;
+ int val;
+
+ clk = clk_get_rate(priv->clk);
+ priv->baudrate = baudrate;
+
+ /* disable transmitter and receiver */
+ val = readl(priv->regs + CADENCE_UART_CONTROL);
+ val &= ~CADENCE_CTRL_TXEN & ~CADENCE_CTRL_RXEN;
+ writel(val, priv->regs + CADENCE_UART_CONTROL);
+
+ /*
+ * clk
+ * rate = -----------
+ * gen*(div+1)
+ */
+
+ for (div = 4; div < 256; div++) {
+ gen = clk / (baudrate * (div + 1));
+
+ if (gen < 1 || gen > 65535)
+ continue;
+
+ calc_rate = clk / (gen * (div + 1));
+ error = baudrate - calc_rate;
+ if (error < 0)
+ error *= -1;
+ if (((error * 100) / baudrate) < 3)
+ break;
+ }
+
+ writel(gen, priv->regs + CADENCE_UART_BAUD_GEN);
+ writel(div, priv->regs + CADENCE_UART_BAUD_DIV);
+
+ /* Soft-Reset Tx/Rx paths */
+ writel(CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES, priv->regs +
+ CADENCE_UART_CONTROL);
+
+ while (readl(priv->regs + CADENCE_UART_CONTROL) &
+ (CADENCE_CTRL_RXRES | CADENCE_CTRL_TXRES))
+ ;
+
+ /* Enable UART */
+ writel(priv->devtype->ctrl, priv->regs + CADENCE_UART_CONTROL);
+
+ return 0;
+}
+
+static int cadence_serial_init_port(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ cadence_serial_reset(cdev);
+
+ /* Enable UART */
+ writel(priv->devtype->ctrl, priv->regs + CADENCE_UART_CONTROL);
+ writel(priv->devtype->mode, priv->regs + CADENCE_UART_MODE);
+
+ return 0;
+}
+
+static void cadence_serial_putc(struct console_device *cdev, char c)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ while ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
+ CADENCE_STS_TFUL) != 0)
+ ;
+
+ writel(c, priv->regs + CADENCE_UART_RXTXFIFO);
+}
+
+static int cadence_serial_tstc(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ return ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
+ CADENCE_STS_REMPTY) == 0);
+}
+
+static int cadence_serial_getc(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ while (!cadence_serial_tstc(cdev))
+ ;
+
+ return readl(priv->regs + CADENCE_UART_RXTXFIFO);
+}
+
+static void cadence_serial_flush(struct console_device *cdev)
+{
+ struct cadence_serial_priv *priv = container_of(cdev,
+ struct cadence_serial_priv, cdev);
+
+ while ((readl(priv->regs + CADENCE_UART_CHANNEL_STS) &
+ CADENCE_STS_TEMPTY) != 0)
+ ;
+}
+
+static int cadence_clocksource_clock_change(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct cadence_serial_priv *priv = container_of(nb,
+ struct cadence_serial_priv, notify);
+
+ cadence_serial_setbaudrate(&priv->cdev, priv->baudrate);
+
+ return 0;
+}
+
+static int cadence_serial_probe(struct device_d *dev)
+{
+ struct console_device *cdev;
+ struct cadence_serial_priv *priv;
+ struct cadence_serial_devtype_data *devtype;
+ int ret;
+
+ ret = dev_get_drvdata(dev, (unsigned long *)&devtype);
+ if (ret)
+ return ret;
+
+ priv = xzalloc(sizeof(*priv));
+ priv->devtype = devtype;
+ cdev = &priv->cdev;
+ dev->priv = priv;
+
+ priv->clk = clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ ret = -ENODEV;
+ goto err_free;
+ }
+
+ if (devtype->mode & CADENCE_MODE_CLK_REF_DIV)
+ clk_set_rate(priv->clk, clk_get_rate(priv->clk) / 8);
+
+ priv->regs = dev_request_mem_region(dev, 0);
+ if (!priv->regs) {
+ ret = -EBUSY;
+ goto err_free;
+ }
+
+ cdev->dev = dev;
+ cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
+ cdev->tstc = cadence_serial_tstc;
+ cdev->putc = cadence_serial_putc;
+ cdev->getc = cadence_serial_getc;
+ cdev->flush = cadence_serial_flush;
+ cdev->setbrg = cadence_serial_setbaudrate;
+
+ cadence_serial_init_port(cdev);
+
+ console_register(cdev);
+ priv->notify.notifier_call = cadence_clocksource_clock_change;
+ clock_register_client(&priv->notify);
+
+ return 0;
+
+err_free:
+ free(priv);
+ return ret;
+}
+
+static void cadence_serial_remove(struct device_d *dev)
+{
+ struct cadence_serial_priv *priv = dev->priv;
+
+ console_unregister(&priv->cdev);
+ free(priv);
+}
+
+static __maybe_unused struct of_device_id cadence_serial_dt_ids[] = {
+ {
+ .compatible = "xlnx,xuartps",
+ .data = (unsigned long)&cadence_r1p08_data,
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct platform_device_id cadence_serial_ids[] = {
+ {
+ .name = "cadence-uart",
+ .driver_data = (unsigned long)&cadence_r1p08_data,
+ }, {
+ /* sentinel */
+ },
+};
+
+static struct driver_d cadence_serial_driver = {
+ .name = "cadence_serial",
+ .probe = cadence_serial_probe,
+ .remove = cadence_serial_remove,
+ .of_compatible = DRV_OF_COMPAT(cadence_serial_dt_ids),
+ .id_table = cadence_serial_ids,
+};
+
+static int cadence_serial_init(void)
+{
+ return platform_driver_register(&cadence_serial_driver);
+}
+console_initcall(cadence_serial_init);
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2013-03-27 8:33 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-03-26 9:11 [PATCH v4 0/5] ARM: add support for Zynq Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v3 1/5] serial: Add driver for Cadence UART Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v3 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
2013-03-26 13:19 ` Josh Cartwright
2013-03-26 13:28 ` Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
2013-03-26 13:20 ` Josh Cartwright
2013-03-26 13:25 ` Josh Cartwright
2013-03-26 14:20 ` Michal Simek
2013-03-26 9:11 ` [PATCH v3 4/5] ARM: zynq: add zynq fsbl checksum script Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v3 5/5] ARM: zynq: Add support for the Avnet Zedboard Steffen Trumtrar
2013-03-26 9:21 ` [PATCH v4 0/5] ARM: add support for Zynq Michal Simek
2013-03-26 9:33 ` Steffen Trumtrar
2013-03-26 9:38 ` Michal Simek
2013-03-26 10:22 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-27 8:32 ` Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2013-03-25 13:02 [PATCH v3 " Steffen Trumtrar
2013-03-25 13:02 ` [PATCH v3 1/5] serial: Add driver for Cadence UART Steffen Trumtrar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox