* (no subject)
@ 2013-04-02 6:19 Lucas Stach
2013-04-02 6:19 ` [PATCH v3 01/10] tegra: pull in iomap.h from the Linux kernel Lucas Stach
` (9 more replies)
0 siblings, 10 replies; 24+ messages in thread
From: Lucas Stach @ 2013-04-02 6:19 UTC (permalink / raw)
To: barebox
From dc699f96a6f4305793f737c18ded63fea926b675 Mon Sep 17 00:00:00 2001
From: Lucas Stach <dev@lynxeye.de>
Date: Tue, 2 Apr 2013 07:50:22 +0200
Subject: [PATCH v3 00/10] Rework current Tegra support
Round 3 of the Tegra rework. A bit beefier this time, as I folded in
some real advancements. Most notable a working GPIO driver and
the 1st stage loading support. Barebox is now aware of the CPU it's
running on and boots the Tegra main CPU cluster if needed. Don't get
too exited yet, you most likely won't see anything when running first
stage, as the pinmux stays in reset state and there is no driver to
switch it to the state needed for your board. 2nd stage loading
should work as before from the same binary.
I've also converted Tegra to builtin DTB, as I would like to
follow the kernel and go a DT only way. Let's see how this works out,
but as U-Boot isn't far away from defining Tegra boards only through
the DT I'm almost sure we can make it work in barebox.
A note for the review: I won't split patches just for the sake of
it. I'm actively working on this code as long as it isn't pulled into
the basebox repo and it's already hard enough to keep track of which
hunks of code should go into the individual patches.
Antony: I've converted the serial and ramsize detection to the
standard used in U-Boot and Linux. Please test if this works for
your board. If not it's not really a barebox error, as your ODMdata
is most likely wrong in this case, but please let me know anyway as
I would like to avoid breaking existing boards.
Lucas Stach (10):
tegra: pull in iomap.h from the Linux kernel
tegra: define TEGRA20 arch type
tegra: switch to DT only
tegra: add driver for the clock and reset module
tegra: add T20 timer driver
tegra: add T20 power management controller driver
tegra: add common lowlevel startup
tegra: add generic debug UART support
tegra: add generic meminit
tegra: add GPIO controller driver
arch/arm/Kconfig | 10 +-
arch/arm/boards/toshiba-ac100/Makefile | 2 -
arch/arm/boards/toshiba-ac100/board.c | 8 -
arch/arm/boards/toshiba-ac100/lowlevel.c | 10 --
arch/arm/boards/toshiba-ac100/serial.c | 39 -----
arch/arm/configs/toshiba_ac100_defconfig | 9 +-
arch/arm/dts/tegra20-paz00.dts | 12 ++
arch/arm/dts/tegra20.dtsi | 41 +++++
arch/arm/mach-tegra/Kconfig | 20 ++-
arch/arm/mach-tegra/Makefile | 8 +-
arch/arm/mach-tegra/clock.c | 56 ------
arch/arm/mach-tegra/include/mach/clkdev.h | 7 +
arch/arm/mach-tegra/include/mach/gpio.h | 1 +
arch/arm/mach-tegra/include/mach/iomap.h | 65 +++----
arch/arm/mach-tegra/include/mach/lowlevel.h | 147 ++++++++++++++++
arch/arm/mach-tegra/include/mach/tegra20-car.h | 179 +++++++++++++++++++
arch/arm/mach-tegra/include/mach/tegra20-pmc.h | 67 ++++++++
arch/arm/mach-tegra/reset.c | 39 -----
arch/arm/mach-tegra/tegra20-car.c | 121 +++++++++++++
arch/arm/mach-tegra/tegra20-pmc.c | 68 ++++++++
arch/arm/mach-tegra/tegra20-timer.c | 120 +++++++++++++
arch/arm/mach-tegra/tegra20.c | 50 ++++++
arch/arm/mach-tegra/tegra_avp_init.c | 228 +++++++++++++++++++++++++
arch/arm/mach-tegra/tegra_maincomplex_init.c | 46 +++++
drivers/gpio/Kconfig | 7 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-tegra.c | 226 ++++++++++++++++++++++++
27 files changed, 1380 insertions(+), 207 deletions(-)
delete mode 100644 arch/arm/boards/toshiba-ac100/lowlevel.c
delete mode 100644 arch/arm/boards/toshiba-ac100/serial.c
create mode 100644 arch/arm/dts/tegra20-paz00.dts
create mode 100644 arch/arm/dts/tegra20.dtsi
delete mode 100644 arch/arm/mach-tegra/clock.c
create mode 100644 arch/arm/mach-tegra/include/mach/clkdev.h
create mode 100644 arch/arm/mach-tegra/include/mach/gpio.h
create mode 100644 arch/arm/mach-tegra/include/mach/lowlevel.h
create mode 100644 arch/arm/mach-tegra/include/mach/tegra20-car.h
create mode 100644 arch/arm/mach-tegra/include/mach/tegra20-pmc.h
delete mode 100644 arch/arm/mach-tegra/reset.c
create mode 100644 arch/arm/mach-tegra/tegra20-car.c
create mode 100644 arch/arm/mach-tegra/tegra20-pmc.c
create mode 100644 arch/arm/mach-tegra/tegra20-timer.c
create mode 100644 arch/arm/mach-tegra/tegra20.c
create mode 100644 arch/arm/mach-tegra/tegra_avp_init.c
create mode 100644 arch/arm/mach-tegra/tegra_maincomplex_init.c
create mode 100644 drivers/gpio/gpio-tegra.c
--
1.8.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v3 01/10] tegra: pull in iomap.h from the Linux kernel
2013-04-02 6:19 Lucas Stach
@ 2013-04-02 6:19 ` Lucas Stach
2013-04-02 6:19 ` [PATCH v3 02/10] tegra: define TEGRA20 arch type Lucas Stach
` (8 subsequent siblings)
9 siblings, 0 replies; 24+ messages in thread
From: Lucas Stach @ 2013-04-02 6:19 UTC (permalink / raw)
To: barebox
This synchronizes the Tegra iomap.h with the latest Linux kernel code.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/mach-tegra/include/mach/iomap.h | 64 ++++++++++----------------------
1 file changed, 19 insertions(+), 45 deletions(-)
diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h
index ba478e7..6ca6504 100644
--- a/arch/arm/mach-tegra/include/mach/iomap.h
+++ b/arch/arm/mach-tegra/include/mach/iomap.h
@@ -62,47 +62,35 @@
#define TEGRA_RES_SEMA_BASE 0x60001000
#define TEGRA_RES_SEMA_SIZE SZ_4K
-#define TEGRA_HDMI_BASE 0x54280000
-#define TEGRA_HDMI_SIZE SZ_256K
-
-#define TEGRA_GART_BASE 0x58000000
-#define TEGRA_GART_SIZE SZ_32M
-
-#define TEGRA_RES_SEMA_BASE 0x60001000
-#define TEGRA_RES_SEMA_SIZE SZ_4K
-
-#define TEGRA_ARB_SEMA_BASE 0x60002000
-#define TEGRA_ARB_SEMA_SIZE SZ_4K
-
#define TEGRA_PRIMARY_ICTLR_BASE 0x60004000
-#define TEGRA_PRIMARY_ICTLR_SIZE 64
-
-#define TEGRA_ARBGNT_ICTLR_BASE 0x60004040
-#define TEGRA_ARBGNT_ICTLR_SIZE 192
+#define TEGRA_PRIMARY_ICTLR_SIZE SZ_64
#define TEGRA_SECONDARY_ICTLR_BASE 0x60004100
-#define TEGRA_SECONDARY_ICTLR_SIZE 64
+#define TEGRA_SECONDARY_ICTLR_SIZE SZ_64
#define TEGRA_TERTIARY_ICTLR_BASE 0x60004200
-#define TEGRA_TERTIARY_ICTLR_SIZE 64
+#define TEGRA_TERTIARY_ICTLR_SIZE SZ_64
#define TEGRA_QUATERNARY_ICTLR_BASE 0x60004300
-#define TEGRA_QUATERNARY_ICTLR_SIZE 64
+#define TEGRA_QUATERNARY_ICTLR_SIZE SZ_64
+
+#define TEGRA_QUINARY_ICTLR_BASE 0x60004400
+#define TEGRA_QUINARY_ICTLR_SIZE SZ_64
#define TEGRA_TMR1_BASE 0x60005000
-#define TEGRA_TMR1_SIZE 8
+#define TEGRA_TMR1_SIZE SZ_8
#define TEGRA_TMR2_BASE 0x60005008
-#define TEGRA_TMR2_SIZE 8
+#define TEGRA_TMR2_SIZE SZ_8
#define TEGRA_TMRUS_BASE 0x60005010
-#define TEGRA_TMRUS_SIZE 64
+#define TEGRA_TMRUS_SIZE SZ_64
#define TEGRA_TMR3_BASE 0x60005050
-#define TEGRA_TMR3_SIZE 8
+#define TEGRA_TMR3_SIZE SZ_8
#define TEGRA_TMR4_BASE 0x60005058
-#define TEGRA_TMR4_SIZE 8
+#define TEGRA_TMR4_SIZE SZ_8
#define TEGRA_CLK_RESET_BASE 0x60006000
#define TEGRA_CLK_RESET_SIZE SZ_4K
@@ -125,17 +113,17 @@
#define TEGRA_AHB_GIZMO_BASE 0x6000C004
#define TEGRA_AHB_GIZMO_SIZE 0x10C
+#define TEGRA_SB_BASE 0x6000C200
+#define TEGRA_SB_SIZE 256
+
#define TEGRA_STATMON_BASE 0x6000C400
#define TEGRA_STATMON_SIZE SZ_1K
#define TEGRA_GPIO_BASE 0x6000D000
#define TEGRA_GPIO_SIZE SZ_4K
-#define TEGRA_EXCEPTION_VECTORS_BASE 0x6000F000
-#define TEGRA_EXCEPTION_VECTORS_SIZE SZ_4K
-
-#define TEGRA_VDE_BASE 0x6001A000
-#define TEGRA_VDE_SIZE (SZ_8K + SZ_4K - SZ_256)
+#define TEGRA_EXCEPTION_VECTORS_BASE 0x6000F000
+#define TEGRA_EXCEPTION_VECTORS_SIZE SZ_4K
#define TEGRA_APB_MISC_BASE 0x70000000
#define TEGRA_APB_MISC_SIZE SZ_4K
@@ -156,10 +144,10 @@
#define TEGRA_I2S2_SIZE SZ_256
#define TEGRA_UARTA_BASE 0x70006000
-#define TEGRA_UARTA_SIZE 64
+#define TEGRA_UARTA_SIZE SZ_64
#define TEGRA_UARTB_BASE 0x70006040
-#define TEGRA_UARTB_SIZE 64
+#define TEGRA_UARTB_SIZE SZ_64
#define TEGRA_UARTC_BASE 0x70006200
#define TEGRA_UARTC_SIZE SZ_256
@@ -275,18 +263,4 @@
#define TEGRA_SDMMC4_BASE 0xC8000600
#define TEGRA_SDMMC4_SIZE SZ_512
-#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
-# define TEGRA_DEBUG_UART_BASE 0
-#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTA_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTB_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTC_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTD_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTE_BASE
-#endif
-
#endif
--
1.8.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v3 02/10] tegra: define TEGRA20 arch type
2013-04-02 6:19 Lucas Stach
2013-04-02 6:19 ` [PATCH v3 01/10] tegra: pull in iomap.h from the Linux kernel Lucas Stach
@ 2013-04-02 6:19 ` Lucas Stach
2013-04-02 13:09 ` Antony Pavlov
2013-04-04 20:43 ` antonynpavlov
2013-04-02 6:19 ` [PATCH v3 03/10] tegra: switch to DT only Lucas Stach
` (7 subsequent siblings)
9 siblings, 2 replies; 24+ messages in thread
From: Lucas Stach @ 2013-04-02 6:19 UTC (permalink / raw)
To: barebox
Tegra is not a single arch type, but a collection of different
generations. Define TEGAR20 arch type to differentiate between the
generations. Switch to ARMv7 cpu type for all Tegras.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/Kconfig | 4 ++--
arch/arm/mach-tegra/Kconfig | 20 ++++++++++++++++++--
2 files changed, 20 insertions(+), 4 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bb9b47b..7d42826 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -136,8 +136,8 @@ config ARCH_VEXPRESS
select COMMON_CLK
config ARCH_TEGRA
- bool "Nvidia Tegra-based boards"
- select CPU_ARM926T
+ bool "Nvidia Tegra"
+ select CPU_V7
select HAS_DEBUG_LL
config ARCH_ZYNQ
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index eda786b..0adf4be 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,11 +1,23 @@
if ARCH_TEGRA
+
+choice
+ prompt "Tegra processor type"
+
+config MACH_TEGRA20
+ bool "Tegra 20"
+
+endchoice
+
+# ---------------------------------------------------------
+
+if MACH_TEGRA20
config ARCH_TEXT_BASE
hex
- default 0x31fc0000
+ default 0x00108000
choice
- prompt "Tegra Board Type"
+ prompt "Tegra 20 Board Type"
config MACH_TOSHIBA_AC100
bool "Toshiba AC100"
@@ -16,4 +28,8 @@ endchoice
source arch/arm/boards/toshiba-ac100/Kconfig
+endif #MACH_TEGRA20
+
+# ---------------------------------------------------------
+
endif
--
1.8.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v3 03/10] tegra: switch to DT only
2013-04-02 6:19 Lucas Stach
2013-04-02 6:19 ` [PATCH v3 01/10] tegra: pull in iomap.h from the Linux kernel Lucas Stach
2013-04-02 6:19 ` [PATCH v3 02/10] tegra: define TEGRA20 arch type Lucas Stach
@ 2013-04-02 6:19 ` Lucas Stach
2013-04-02 11:42 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-04 20:39 ` antonynpavlov
2013-04-02 6:19 ` [PATCH v3 04/10] tegra: add driver for the clock and reset module Lucas Stach
` (6 subsequent siblings)
9 siblings, 2 replies; 24+ messages in thread
From: Lucas Stach @ 2013-04-02 6:19 UTC (permalink / raw)
To: barebox
We will follow the Linux kernel and go devicetree only for Tegra. This
doesn't prevent specific code for certain boards, but always requires a
valid DTB for all boards.
Also regenerate the AC100 defconfig to reflect this change.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/Kconfig | 2 ++
arch/arm/configs/toshiba_ac100_defconfig | 9 ++++++---
arch/arm/dts/tegra20-paz00.dts | 12 ++++++++++++
arch/arm/dts/tegra20.dtsi | 5 +++++
4 files changed, 25 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/dts/tegra20-paz00.dts
create mode 100644 arch/arm/dts/tegra20.dtsi
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7d42826..8f37d12 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -139,6 +139,8 @@ config ARCH_TEGRA
bool "Nvidia Tegra"
select CPU_V7
select HAS_DEBUG_LL
+ select BUILTIN_DTB
+ select OFTREE
config ARCH_ZYNQ
bool "Xilinx Zynq-based boards"
diff --git a/arch/arm/configs/toshiba_ac100_defconfig b/arch/arm/configs/toshiba_ac100_defconfig
index 065189d..b44fd26 100644
--- a/arch/arm/configs/toshiba_ac100_defconfig
+++ b/arch/arm/configs/toshiba_ac100_defconfig
@@ -1,4 +1,5 @@
-CONFIG_ARCH_TEGRA=y
+CONFIG_BUILTIN_DTB=y
+CONFIG_BUILTIN_DTB_NAME="tegra20-paz00"
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_TEXT_BASE=0x01000000
CONFIG_BROKEN=y
@@ -14,6 +15,7 @@ CONFIG_ENABLE_DEVICE_NOISE=y
CONFIG_CMD_SLEEP=y
# CONFIG_CMD_TRUE is not set
# CONFIG_CMD_FALSE is not set
+CONFIG_CMD_TFTP=y
CONFIG_CMD_LOADB=y
CONFIG_CMD_LOADY=y
CONFIG_CMD_LOADS=y
@@ -23,12 +25,12 @@ CONFIG_CMD_SHA1SUM=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_FS_TFTP=y
CONFIG_NET_NETCONSOLE=y
+CONFIG_OFDEVICE=y
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_NET_USB=y
CONFIG_NET_USB_ASIX=y
@@ -36,4 +38,5 @@ CONFIG_NET_USB_ASIX=y
CONFIG_USB=y
CONFIG_USB_EHCI=y
CONFIG_USB_STORAGE=y
+CONFIG_FS_TFTP=y
CONFIG_FS_FAT=y
diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts
new file mode 100644
index 0000000..09ccb8b
--- /dev/null
+++ b/arch/arm/dts/tegra20-paz00.dts
@@ -0,0 +1,12 @@
+/dts-v1/;
+
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "Toshiba AC100 / Dynabook AZ";
+ compatible = "compal,paz00", "nvidia,tegra20";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+};
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
new file mode 100644
index 0000000..9f8860b
--- /dev/null
+++ b/arch/arm/dts/tegra20.dtsi
@@ -0,0 +1,5 @@
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "nvidia,tegra20";
+};
--
1.8.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v3 04/10] tegra: add driver for the clock and reset module
2013-04-02 6:19 Lucas Stach
` (2 preceding siblings ...)
2013-04-02 6:19 ` [PATCH v3 03/10] tegra: switch to DT only Lucas Stach
@ 2013-04-02 6:19 ` Lucas Stach
2013-04-02 6:19 ` [PATCH v3 05/10] tegra: add T20 timer driver Lucas Stach
` (5 subsequent siblings)
9 siblings, 0 replies; 24+ messages in thread
From: Lucas Stach @ 2013-04-02 6:19 UTC (permalink / raw)
To: barebox
Only a basic set of clocks is supported. This is a temporary solution
and will go away as soon as the port of the Tegra common clock code from
the Linux kernel is ready to go.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/Kconfig | 2 +
arch/arm/dts/tegra20.dtsi | 6 ++
arch/arm/mach-tegra/Makefile | 1 +
arch/arm/mach-tegra/include/mach/clkdev.h | 7 ++
arch/arm/mach-tegra/include/mach/tegra20-car.h | 22 +++++
arch/arm/mach-tegra/tegra20-car.c | 117 +++++++++++++++++++++++++
6 files changed, 155 insertions(+)
create mode 100644 arch/arm/mach-tegra/include/mach/clkdev.h
create mode 100644 arch/arm/mach-tegra/include/mach/tegra20-car.h
create mode 100644 arch/arm/mach-tegra/tegra20-car.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8f37d12..e163e18 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -140,6 +140,8 @@ config ARCH_TEGRA
select CPU_V7
select HAS_DEBUG_LL
select BUILTIN_DTB
+ select COMMON_CLK
+ select CLKDEV_LOOKUP
select OFTREE
config ARCH_ZYNQ
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index 9f8860b..2edfda1 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -2,4 +2,10 @@
/ {
compatible = "nvidia,tegra20";
+
+ tegra_car: clock {
+ compatible = "nvidia,tegra20-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ };
};
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 11915e5..9aa7725 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -1,2 +1,3 @@
obj-y += clock.o
obj-y += reset.o
+obj-y += tegra20-car.o
diff --git a/arch/arm/mach-tegra/include/mach/clkdev.h b/arch/arm/mach-tegra/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/tegra20-car.h b/arch/arm/mach-tegra/include/mach/tegra20-car.h
new file mode 100644
index 0000000..43ed059
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/tegra20-car.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Register definitions */
+#define CRC_OSC_CTRL 0x050
+#define CRC_OSC_CTRL_OSC_FREQ_SHIFT 30
+#define CRC_OSC_CTRL_OSC_FREQ_MASK (0x3 << CRC_OSC_CTRL_OSC_FREQ_SHIFT)
+#define CRC_OSC_CTRL_PLL_REF_DIV_SHIFT 28
+#define CRC_OSC_CTRL_PLL_REF_DIV_MASK (0x3 << CRC_OSC_CTRL_PLL_REF_DIV_SHIFT)
diff --git a/arch/arm/mach-tegra/tegra20-car.c b/arch/arm/mach-tegra/tegra20-car.c
new file mode 100644
index 0000000..63c6ca5
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra20-car.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+ * @file
+ * @brief Device driver for the Tegra 20 clock and reset (CAR) controller
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <mach/iomap.h>
+
+#include <mach/tegra20-car.h>
+
+static void __iomem *car_base;
+
+enum tegra20_clks {
+ cpu, ac97 = 3, rtc, timer, uarta, gpio = 8, sdmmc2, i2s1 = 11, i2c1,
+ ndflash, sdmmc1, sdmmc4, twc, pwm, i2s2, epp, gr2d = 21, usbd, isp,
+ gr3d, ide, disp2, disp1, host1x, vcp, cache2 = 31, mem, ahbdma, apbdma,
+ kbc = 36, stat_mon, pmc, fuse, kfuse, sbc1, nor, spi, sbc2, xio, sbc3,
+ dvc, dsi, mipi = 50, hdmi, csi, tvdac, i2c2, uartc, emc = 57, usb2,
+ usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3,
+ pex, owr, afi, csite, pcie_xclk, avpucq = 75, la, irama = 84, iramb,
+ iramc, iramd, cram2, audio_2x, clk_d, csus = 92, cdev1, cdev2,
+ uartb = 96, vfir, spdif_in, spdif_out, vi, vi_sensor, tvo, cve,
+ osc, clk_32k, clk_m, sclk, cclk, hclk, pclk, blink, pll_a, pll_a_out0,
+ pll_c, pll_c_out1, pll_d, pll_d_out0, pll_e, pll_m, pll_m_out1,
+ pll_p, pll_p_out1, pll_p_out2, pll_p_out3, pll_p_out4, pll_u,
+ pll_x, audio, pll_ref, twd, clk_max,
+};
+
+static struct clk *clks[clk_max];
+
+static unsigned long get_osc_frequency(void)
+{
+ u32 osc_ctrl = readl(car_base + CRC_OSC_CTRL);
+
+ switch ((osc_ctrl & CRC_OSC_CTRL_OSC_FREQ_MASK) >>
+ CRC_OSC_CTRL_OSC_FREQ_SHIFT)
+ {
+ case 0:
+ return 13000000;
+ case 1:
+ return 19200000;
+ case 2:
+ return 12000000;
+ case 3:
+ return 26000000;
+ default:
+ return 0;
+ }
+}
+
+static unsigned int get_pll_ref_div(void)
+{
+ u32 osc_ctrl = readl(car_base + CRC_OSC_CTRL);
+
+ return 1U << ((osc_ctrl & CRC_OSC_CTRL_PLL_REF_DIV_MASK) >>
+ CRC_OSC_CTRL_PLL_REF_DIV_SHIFT);
+}
+
+static int tegra20_car_probe(struct device_d *dev)
+{
+ car_base = dev_request_mem_region(dev, 0);
+ if (!car_base)
+ return -EBUSY;
+
+ /* primary clocks */
+ clks[clk_m] = clk_fixed("clk_m", get_osc_frequency());
+ clks[clk_32k] = clk_fixed("clk_32k", 32768);
+
+ clks[pll_ref] = clk_fixed_factor("pll_ref", "clk_m", 1,
+ get_pll_ref_div());
+
+ /* derived clocks */
+ /* timer is a gate, but as it's enabled by BOOTROM we needn't worry */
+ clks[timer] = clk_fixed_factor("timer", "clk_m", 1, 1);
+
+ return 0;
+}
+
+static __maybe_unused struct of_device_id tegra20_car_dt_ids[] = {
+ {
+ .compatible = "nvidia,tegra20-car",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d tegra20_car_driver = {
+ .probe = tegra20_car_probe,
+ .name = "tegra20-car",
+ .of_compatible = DRV_OF_COMPAT(tegra20_car_dt_ids),
+};
+
+static int tegra20_car_init(void)
+{
+ return platform_driver_register(&tegra20_car_driver);
+}
+postcore_initcall(tegra20_car_init);
--
1.8.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v3 05/10] tegra: add T20 timer driver
2013-04-02 6:19 Lucas Stach
` (3 preceding siblings ...)
2013-04-02 6:19 ` [PATCH v3 04/10] tegra: add driver for the clock and reset module Lucas Stach
@ 2013-04-02 6:19 ` Lucas Stach
2013-04-02 6:19 ` [PATCH v3 06/10] tegra: add T20 power management controller driver Lucas Stach
` (4 subsequent siblings)
9 siblings, 0 replies; 24+ messages in thread
From: Lucas Stach @ 2013-04-02 6:19 UTC (permalink / raw)
To: barebox
Replace the ad-hoc clocksource implementation with a proper driver for
the Tegra 20 timer. This driver is able to do the required hardware
initialisation itself.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/dts/tegra20.dtsi | 9 +++
arch/arm/mach-tegra/Makefile | 2 +-
arch/arm/mach-tegra/clock.c | 56 -----------------
arch/arm/mach-tegra/tegra20-car.c | 4 ++
arch/arm/mach-tegra/tegra20-timer.c | 120 ++++++++++++++++++++++++++++++++++++
5 files changed, 134 insertions(+), 57 deletions(-)
delete mode 100644 arch/arm/mach-tegra/clock.c
create mode 100644 arch/arm/mach-tegra/tegra20-timer.c
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index 2edfda1..cc76527 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -3,6 +3,15 @@
/ {
compatible = "nvidia,tegra20";
+ timer@60005000 {
+ compatible = "nvidia,tegra20-timer";
+ reg = <0x60005000 0x60>;
+ interrupts = <0 0 0x04
+ 0 1 0x04
+ 0 41 0x04
+ 0 42 0x04>;
+ };
+
tegra_car: clock {
compatible = "nvidia,tegra20-car";
reg = <0x60006000 0x1000>;
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 9aa7725..1112d11 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -1,3 +1,3 @@
-obj-y += clock.o
obj-y += reset.o
obj-y += tegra20-car.o
+obj-y += tegra20-timer.o
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
deleted file mode 100644
index 82065ee..0000000
--- a/arch/arm/mach-tegra/clock.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2011 Antony Pavlov <antonynpavlov@gmail.com>
- *
- * This file is part of barebox.
- * See file CREDITS for list of people who contributed to this project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-/**
- * @file
- * @brief Clocksource based on Tegra internal timer
- */
-
-#include <common.h>
-#include <clock.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <init.h>
-#include <asm/io.h>
-#include <mach/iomap.h>
-
-static void __iomem *timer_reg_base = (void __iomem *) (TEGRA_TMR1_BASE);
-
-#define timer_writel(value, reg) \
- __raw_writel(value, (u32)timer_reg_base + (reg))
-#define timer_readl(reg) \
- __raw_readl((u32)timer_reg_base + (reg))
-
-static uint64_t tegra_clocksource_read(void)
-{
- return timer_readl(0x10);
-}
-
-static struct clocksource cs = {
- .read = tegra_clocksource_read,
- .mask = 0xffffffff,
-};
-
-/* FIXME: here we have no initialization. All initialization made by U-Boot */
-static int clocksource_init(void)
-{
- cs.mult = clocksource_hz2mult(1000000, cs.shift);
- init_clock(&cs);
-
- return 0;
-}
-core_initcall(clocksource_init);
diff --git a/arch/arm/mach-tegra/tegra20-car.c b/arch/arm/mach-tegra/tegra20-car.c
index 63c6ca5..08033d7 100644
--- a/arch/arm/mach-tegra/tegra20-car.c
+++ b/arch/arm/mach-tegra/tegra20-car.c
@@ -23,6 +23,7 @@
#include <init.h>
#include <io.h>
#include <linux/clk.h>
+#include <linux/clkdev.h>
#include <linux/err.h>
#include <mach/iomap.h>
@@ -93,6 +94,9 @@ static int tegra20_car_probe(struct device_d *dev)
/* timer is a gate, but as it's enabled by BOOTROM we needn't worry */
clks[timer] = clk_fixed_factor("timer", "clk_m", 1, 1);
+ /* device to clock links */
+ clkdev_add_physbase(clks[timer], TEGRA_TMR1_BASE, NULL);
+
return 0;
}
diff --git a/arch/arm/mach-tegra/tegra20-timer.c b/arch/arm/mach-tegra/tegra20-timer.c
new file mode 100644
index 0000000..6c1d302
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra20-timer.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+ * @file
+ * @brief Device driver for the Tegra 20 timer, which exposes a clocksource.
+ */
+
+#include <common.h>
+#include <clock.h>
+#include <init.h>
+#include <io.h>
+#include <linux/clk.h>
+
+/* register definitions */
+#define TIMERUS_CNTR_1US 0x10
+#define TIMERUS_USEC_CFG 0x14
+
+static void __iomem *timer_base;
+
+static uint64_t tegra20_timer_cs_read(void)
+{
+ return readl(timer_base + TIMERUS_CNTR_1US);
+}
+
+static struct clocksource cs = {
+ .read = tegra20_timer_cs_read,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+static int tegra20_timer_probe(struct device_d *dev)
+{
+ struct clk *timer_clk;
+ unsigned long rate;
+ u32 reg;
+
+ /* use only one timer */
+ if (timer_base)
+ return -EBUSY;
+
+ timer_base = dev_request_mem_region(dev, 0);
+ if (!timer_base) {
+ dev_err(dev, "could not get memory region\n");
+ return -ENODEV;
+ }
+
+ timer_clk = clk_get(dev, NULL);
+ if (!timer_clk) {
+ dev_err(dev, "could not get clock\n");
+ return -ENODEV;
+ }
+
+ clk_enable(timer_clk);
+
+ /*
+ * calibrate timer to run at 1MHz
+ * TIMERUS_USEC_CFG selects the scale down factor with bits [0:7]
+ * representing the divisor and bits [8:15] representing the dividend
+ * each in n+1 form.
+ */
+ rate = clk_get_rate(timer_clk);
+ switch (rate) {
+ case 12000000:
+ reg = 0x000b;
+ break;
+ case 13000000:
+ reg = 0x000c;
+ break;
+ case 19200000:
+ reg = 0x045f;
+ break;
+ case 26000000:
+ reg = 0x0019;
+ break;
+ default:
+ reg = 0;
+ dev_warn(dev, "unknown timer clock rate\n");
+ break;
+ }
+ writel(reg, timer_base + TIMERUS_USEC_CFG);
+
+ cs.mult = clocksource_hz2mult(1000000, cs.shift);
+ init_clock(&cs);
+
+ return 0;
+}
+
+static __maybe_unused struct of_device_id tegra20_timer_dt_ids[] = {
+ {
+ .compatible = "nvidia,tegra20-timer",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d tegra20_timer_driver = {
+ .probe = tegra20_timer_probe,
+ .name = "tegra20-timer",
+ .of_compatible = DRV_OF_COMPAT(tegra20_timer_dt_ids),
+};
+
+static int tegra20_timer_init(void)
+{
+ return platform_driver_register(&tegra20_timer_driver);
+}
+
+coredevice_initcall(tegra20_timer_init);
--
1.8.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v3 06/10] tegra: add T20 power management controller driver
2013-04-02 6:19 Lucas Stach
` (4 preceding siblings ...)
2013-04-02 6:19 ` [PATCH v3 05/10] tegra: add T20 timer driver Lucas Stach
@ 2013-04-02 6:19 ` Lucas Stach
2013-04-02 6:19 ` [PATCH v3 07/10] tegra: add common lowlevel startup Lucas Stach
` (3 subsequent siblings)
9 siblings, 0 replies; 24+ messages in thread
From: Lucas Stach @ 2013-04-02 6:19 UTC (permalink / raw)
To: barebox
Currently only implements system wide reset functionality.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/dts/tegra20.dtsi | 5 ++
arch/arm/mach-tegra/Makefile | 2 +-
arch/arm/mach-tegra/include/mach/tegra20-pmc.h | 37 ++++++++++++++
arch/arm/mach-tegra/reset.c | 39 ---------------
arch/arm/mach-tegra/tegra20-pmc.c | 68 ++++++++++++++++++++++++++
5 files changed, 111 insertions(+), 40 deletions(-)
create mode 100644 arch/arm/mach-tegra/include/mach/tegra20-pmc.h
delete mode 100644 arch/arm/mach-tegra/reset.c
create mode 100644 arch/arm/mach-tegra/tegra20-pmc.c
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index cc76527..91858ec 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -17,4 +17,9 @@
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
};
+
+ pmc {
+ compatible = "nvidia,tegra20-pmc";
+ reg = <0x7000e400 0x400>;
+ };
};
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 1112d11..131a1d9 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -1,3 +1,3 @@
-obj-y += reset.o
obj-y += tegra20-car.o
+obj-y += tegra20-pmc.o
obj-y += tegra20-timer.o
diff --git a/arch/arm/mach-tegra/include/mach/tegra20-pmc.h b/arch/arm/mach-tegra/include/mach/tegra20-pmc.h
new file mode 100644
index 0000000..a905399
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/tegra20-pmc.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* register definitions */
+#define PMC_CNTRL 0x000
+#define PMC_CNTRL_FUSE_OVERRIDE (1 << 18)
+#define PMC_CNTRL_INTR_POLARITY (1 << 17)
+#define PMC_CNTRL_CPUPWRREQ_OE (1 << 16)
+#define PMC_CNTRL_CPUPWRREQ_POLARITY (1 << 15)
+#define PMC_CNTRL_SIDE_EFFECT_LP0 (1 << 14)
+#define PMC_CNTRL_AOINIT (1 << 13)
+#define PMC_CNTRL_PWRGATE_DIS (1 << 12)
+#define PMC_CNTRL_SYSCLK_OE (1 << 11)
+#define PMC_CNTRL_SYSCLK_POLARITY (1 << 10)
+#define PMC_CNTRL_PWRREQ_OE (1 << 9)
+#define PMC_CNTRL_PWRREQ_POLARITY (1 << 8)
+#define PMC_CNTRL_BLINK_EN (1 << 7)
+#define PMC_CNTRL_GLITCHDET_DIS (1 << 6)
+#define PMC_CNTRL_LATCHWAKE_EN (1 << 5)
+#define PMC_CNTRL_MAIN_RST (1 << 4)
+#define PMC_CNTRL_KBC_RST (1 << 3)
+#define PMC_CNTRL_RTC_RST (1 << 2)
+#define PMC_CNTRL_RTC_CLK_DIS (1 << 1)
+#define PMC_CNTRL_KBC_CLK_DIS (1 << 0)
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
deleted file mode 100644
index 91f9b3b..0000000
--- a/arch/arm/mach-tegra/reset.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2011 Antony Pavlov <antonynpavlov@gmail.com>
- *
- * This file is part of barebox.
- * See file CREDITS for list of people who contributed to this project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-/**
- * @file
- * @brief Resetting an malta board
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <mach/iomap.h>
-
-#define PRM_RSTCTRL TEGRA_PMC_BASE
-
-void __noreturn reset_cpu(ulong addr)
-{
- int rstctrl;
-
- rstctrl = __raw_readl((char *)PRM_RSTCTRL);
- rstctrl |= 0x10;
- __raw_writel(rstctrl, (char *)PRM_RSTCTRL);
-
- unreachable();
-}
-EXPORT_SYMBOL(reset_cpu);
diff --git a/arch/arm/mach-tegra/tegra20-pmc.c b/arch/arm/mach-tegra/tegra20-pmc.c
new file mode 100644
index 0000000..b7d84d8
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra20-pmc.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+ * @file
+ * @brief Device driver for the Tegra 20 power management controller.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+
+#include <mach/tegra20-pmc.h>
+
+static void __iomem *pmc_base;
+
+/* main SoC reset trigger */
+void __noreturn reset_cpu(ulong addr)
+{
+ writel(PMC_CNTRL_MAIN_RST, pmc_base + PMC_CNTRL);
+
+ unreachable();
+}
+EXPORT_SYMBOL(reset_cpu);
+
+static int tegra20_pmc_probe(struct device_d *dev)
+{
+ pmc_base = dev_request_mem_region(dev, 0);
+ if (!pmc_base) {
+ dev_err(dev, "could not get memory region\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static __maybe_unused struct of_device_id tegra20_pmc_dt_ids[] = {
+ {
+ .compatible = "nvidia,tegra20-pmc",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d tegra20_pmc_driver = {
+ .probe = tegra20_pmc_probe,
+ .name = "tegra20-pmc",
+ .of_compatible = DRV_OF_COMPAT(tegra20_pmc_dt_ids),
+};
+
+static int tegra20_pmc_init(void)
+{
+ return platform_driver_register(&tegra20_pmc_driver);
+}
+coredevice_initcall(tegra20_pmc_init);
--
1.8.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v3 07/10] tegra: add common lowlevel startup
2013-04-02 6:19 Lucas Stach
` (5 preceding siblings ...)
2013-04-02 6:19 ` [PATCH v3 06/10] tegra: add T20 power management controller driver Lucas Stach
@ 2013-04-02 6:19 ` Lucas Stach
2013-04-02 6:19 ` [PATCH v3 08/10] tegra: add generic debug UART support Lucas Stach
` (2 subsequent siblings)
9 siblings, 0 replies; 24+ messages in thread
From: Lucas Stach @ 2013-04-02 6:19 UTC (permalink / raw)
To: barebox
All Tegra20 boards have a common startup sequence. Also there is an
agreement on how to find out about the installed amount of RAM and other
information needed by early startup. So as there is really no need to do
any lowlevel stuff per board, we can just do it at the ARCH level.
This also enables the first stage loading of barebox by detecting the
currently running CPU and booting the main CPU cluster if neccesary.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/boards/toshiba-ac100/Makefile | 1 -
arch/arm/boards/toshiba-ac100/lowlevel.c | 10 --
arch/arm/mach-tegra/Makefile | 3 +
arch/arm/mach-tegra/include/mach/iomap.h | 3 +
arch/arm/mach-tegra/include/mach/lowlevel.h | 113 ++++++++++++
arch/arm/mach-tegra/include/mach/tegra20-car.h | 157 +++++++++++++++++
arch/arm/mach-tegra/include/mach/tegra20-pmc.h | 30 ++++
arch/arm/mach-tegra/tegra_avp_init.c | 228 +++++++++++++++++++++++++
arch/arm/mach-tegra/tegra_maincomplex_init.c | 46 +++++
9 files changed, 580 insertions(+), 11 deletions(-)
delete mode 100644 arch/arm/boards/toshiba-ac100/lowlevel.c
create mode 100644 arch/arm/mach-tegra/include/mach/lowlevel.h
create mode 100644 arch/arm/mach-tegra/tegra_avp_init.c
create mode 100644 arch/arm/mach-tegra/tegra_maincomplex_init.c
diff --git a/arch/arm/boards/toshiba-ac100/Makefile b/arch/arm/boards/toshiba-ac100/Makefile
index 4d321e1..9e14763 100644
--- a/arch/arm/boards/toshiba-ac100/Makefile
+++ b/arch/arm/boards/toshiba-ac100/Makefile
@@ -1,3 +1,2 @@
obj-y += board.o
obj-$(CONFIG_DRIVER_SERIAL_NS16550) += serial.o
-lwl-y += lowlevel.o
diff --git a/arch/arm/boards/toshiba-ac100/lowlevel.c b/arch/arm/boards/toshiba-ac100/lowlevel.c
deleted file mode 100644
index 2f99d70..0000000
--- a/arch/arm/boards/toshiba-ac100/lowlevel.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <common.h>
-#include <sizes.h>
-#include <asm/barebox-arm-head.h>
-#include <asm/barebox-arm.h>
-
-void __naked barebox_arm_reset_vector(void)
-{
- arm_cpu_lowlevel_init();
- barebox_arm_entry(0x0, SZ_512M, 0);
-}
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 131a1d9..0807af6 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -1,3 +1,6 @@
+CFLAGS_tegra_avp_init.o := -mcpu=arm7tdmi -march=armv4t
+lwl-y += tegra_avp_init.o
+lwl-y += tegra_maincomplex_init.o
obj-y += tegra20-car.o
obj-y += tegra20-pmc.o
obj-y += tegra20-timer.o
diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h
index 6ca6504..70eebb4 100644
--- a/arch/arm/mach-tegra/include/mach/iomap.h
+++ b/arch/arm/mach-tegra/include/mach/iomap.h
@@ -59,6 +59,9 @@
#define TEGRA_GART_BASE 0x58000000
#define TEGRA_GART_SIZE SZ_32M
+#define TEGRA_UP_TAG_BASE 0x60000000
+#define TEGRA_UP_TAG_SIZE SZ_4K
+
#define TEGRA_RES_SEMA_BASE 0x60001000
#define TEGRA_RES_SEMA_SIZE SZ_4K
diff --git a/arch/arm/mach-tegra/include/mach/lowlevel.h b/arch/arm/mach-tegra/include/mach/lowlevel.h
new file mode 100644
index 0000000..bd1a8db
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/lowlevel.h
@@ -0,0 +1,113 @@
+/*
+ * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+ * @file
+ * @brief Boot informations provided by the Tegra SoC and it's BootROM. All
+ * accessor functions are a header only implementations, as they are meant to
+ * be used by both the main CPU complex (ARMv7) and the AVP (ARMv4).
+ */
+
+#include <sizes.h>
+#include <io.h>
+#include <mach/iomap.h>
+
+/* Bootinfotable */
+
+#define NV_BIT_BCTSIZE 0x38 /* size of the BCT in IRAM */
+#define NV_BIT_BCTPTR 0x3C /* location of the BCT in IRAM */
+
+/* ODM data */
+#define BCT_ODMDATA_OFFSET 12 /* offset from the _end_ of the BCT */
+
+#define T20_ODMDATA_RAMSIZE_SHIFT 28
+#define T20_ODMDATA_RAMSIZE_MASK (3 << T20_ODMDATA_RAMSIZE_SHIFT)
+
+static inline u32 tegra_get_odmdata(void)
+{
+ u32 bctsize, bctptr, odmdata;
+
+ bctsize = cpu_readl(TEGRA_IRAM_BASE + NV_BIT_BCTSIZE);
+ bctptr = cpu_readl(TEGRA_IRAM_BASE + NV_BIT_BCTPTR);
+
+ odmdata = cpu_readl(bctptr + bctsize - BCT_ODMDATA_OFFSET);
+
+ return odmdata;
+}
+
+/* chip ID */
+#define APB_MISC_HIDREV 0x804
+#define HIDREV_CHIPID_SHIFT 8
+#define HIDREV_CHIPID_MASK (0xff << HIDREV_CHIPID_SHIFT)
+
+enum tegra_chiptype {
+ TEGRA_UNK_REV = -1,
+ TEGRA20 = 0,
+};
+
+static inline enum tegra_chiptype tegra_get_chiptype(void)
+{
+ u32 hidrev;
+
+ hidrev = readl(TEGRA_APB_MISC_BASE + APB_MISC_HIDREV);
+
+ switch ((hidrev & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT) {
+ case 0x20:
+ return TEGRA20;
+ default:
+ return TEGRA_UNK_REV;
+ }
+}
+
+static inline int tegra_get_num_cores(void)
+{
+ switch (tegra_get_chiptype()) {
+ case TEGRA20:
+ return 2;
+ break;
+ default:
+ return 0;
+ break;
+ }
+}
+
+/* Runtime data */
+static inline int tegra_cpu_is_maincomplex(void)
+{
+ u32 tag0;
+
+ tag0 = readl(TEGRA_UP_TAG_BASE);
+
+ return (tag0 & 0xff) == 0x55;
+}
+
+static inline uint32_t tegra20_get_ramsize(void)
+{
+ switch ((tegra_get_odmdata() & T20_ODMDATA_RAMSIZE_MASK) >>
+ T20_ODMDATA_RAMSIZE_SHIFT)
+ {
+ case 1:
+ return SZ_256M;
+ default:
+ case 2:
+ return SZ_512M;
+ case 3:
+ return SZ_1G;
+ }
+}
+
+/* reset vector for the main CPU complex */
+void tegra_maincomplex_entry(void);
diff --git a/arch/arm/mach-tegra/include/mach/tegra20-car.h b/arch/arm/mach-tegra/include/mach/tegra20-car.h
index 43ed059..5669732 100644
--- a/arch/arm/mach-tegra/include/mach/tegra20-car.h
+++ b/arch/arm/mach-tegra/include/mach/tegra20-car.h
@@ -15,8 +15,165 @@
*/
/* Register definitions */
+#define CRC_CLK_OUT_ENB_L 0x010
+#define CRC_CLK_OUT_ENB_L_CACHE2 (1 << 31)
+#define CRC_CLK_OUT_ENB_L_VCP (1 << 29)
+#define CRC_CLK_OUT_ENB_L_HOST1X (1 << 28)
+#define CRC_CLK_OUT_ENB_L_DISP1 (1 << 27)
+#define CRC_CLK_OUT_ENB_L_DISP2 (1 << 26)
+#define CRC_CLK_OUT_ENB_L_IDE (1 << 25)
+#define CRC_CLK_OUT_ENB_L_3D (1 << 24)
+#define CRC_CLK_OUT_ENB_L_ISP (1 << 23)
+#define CRC_CLK_OUT_ENB_L_USBD (1 << 22)
+#define CRC_CLK_OUT_ENB_L_2D (1 << 21)
+#define CRC_CLK_OUT_ENB_L_VI (1 << 20)
+#define CRC_CLK_OUT_ENB_L_EPP (1 << 19)
+#define CRC_CLK_OUT_ENB_L_I2S2 (1 << 18)
+#define CRC_CLK_OUT_ENB_L_PWM (1 << 17)
+#define CRC_CLK_OUT_ENB_L_TWC (1 << 16)
+#define CRC_CLK_OUT_ENB_L_SDMMC4 (1 << 15)
+#define CRC_CLK_OUT_ENB_L_SDMMC1 (1 << 14)
+#define CRC_CLK_OUT_ENB_L_NDFLASH (1 << 13)
+#define CRC_CLK_OUT_ENB_L_I2C1 (1 << 12)
+#define CRC_CLK_OUT_ENB_L_I2S1 (1 << 11)
+#define CRC_CLK_OUT_ENB_L_SPDIF (1 << 10)
+#define CRC_CLK_OUT_ENB_L_SDMMC2 (1 << 9)
+#define CRC_CLK_OUT_ENB_L_GPIO (1 << 8)
+#define CRC_CLK_OUT_ENB_L_UART2 (1 << 7)
+#define CRC_CLK_OUT_ENB_L_UART1 (1 << 6)
+#define CRC_CLK_OUT_ENB_L_TMR (1 << 5)
+#define CRC_CLK_OUT_ENB_L_RTC (1 << 4)
+#define CRC_CLK_OUT_ENB_L_AC97 (1 << 3)
+#define CRC_CLK_OUT_ENB_L_CPU (1 << 0)
+
+#define CRC_SCLK_BURST_POLICY 0x028
+#define CRC_SCLK_BURST_POLICY_SYS_STATE_SHIFT 28
+#define CRC_SCLK_BURST_POLICY_SYS_STATE_FIQ 8
+#define CRC_SCLK_BURST_POLICY_SYS_STATE_IRQ 4
+#define CRC_SCLK_BURST_POLICY_SYS_STATE_RUN 2
+#define CRC_SCLK_BURST_POLICY_SYS_STATE_IDLE 1
+#define CRC_SCLK_BURST_POLICY_SYS_STATE_STDBY 0
+
+#define CRC_SUPER_SCLK_DIV 0x02c
+#define CRC_SUPER_SDIV_ENB (1 << 31)
+#define CRC_SUPER_SDIV_DIS_FROM_COP_FIQ (1 << 27)
+#define CRC_SUPER_SDIV_DIS_FROM_CPU_FIQ (1 << 26)
+#define CRC_SUPER_SDIV_DIS_FROM_COP_IRQ (1 << 25)
+#define CRC_SUPER_SDIV_DIS_FROM_CPU_IRQ (1 << 24)
+#define CRC_SUPER_SDIV_DIVIDEND_SHIFT 8
+#define CRC_SUPER_SDIV_DIVIDEND_MASK (0xff << CRC_SUPER_SDIV_DIVIDEND_SHIFT)
+#define CRC_SUPER_SDIV_DIVISOR_SHIFT 0
+#define CRC_SUPER_SDIV_DIVISOR_MASK (0xff << CRC_SUPER_SDIV_DIVISOR_SHIFT)
+
+#define CRC_CLK_CPU_CMPLX 0x04c
+#define CRC_CLK_CPU_CMPLX_CPU3_CLK_STP (1 << 11)
+#define CRC_CLK_CPU_CMPLX_CPU2_CLK_STP (1 << 10)
+#define CRC_CLK_CPU_CMPLX_CPU1_CLK_STP (1 << 9)
+#define CRC_CLK_CPU_CMPLX_CPU0_CLK_STP (1 << 8)
+#define CRC_CLK_CPU_CMPLX_CPU_BRIDGE_DIV_SHIFT 0
+#define CRC_CLK_CPU_CMPLX_CPU_BRIDGE_DIV_4 3
+#define CRC_CLK_CPU_CMPLX_CPU_BRIDGE_DIV_3 2
+#define CRC_CLK_CPU_CMPLX_CPU_BRIDGE_DIV_2 1
+#define CRC_CLK_CPU_CMPLX_CPU_BRIDGE_DIV_1 0
+
#define CRC_OSC_CTRL 0x050
#define CRC_OSC_CTRL_OSC_FREQ_SHIFT 30
#define CRC_OSC_CTRL_OSC_FREQ_MASK (0x3 << CRC_OSC_CTRL_OSC_FREQ_SHIFT)
#define CRC_OSC_CTRL_PLL_REF_DIV_SHIFT 28
#define CRC_OSC_CTRL_PLL_REF_DIV_MASK (0x3 << CRC_OSC_CTRL_PLL_REF_DIV_SHIFT)
+
+#define CRC_PLLX_BASE 0x0e0
+#define CRC_PLLX_BASE_BYPASS (1 << 31)
+#define CRC_PLLX_BASE_ENABLE (1 << 30)
+#define CRC_PLLX_BASE_REF_DIS (1 << 29)
+#define CRC_PLLX_BASE_LOCK (1 << 27)
+#define CRC_PLLX_BASE_DIVP_SHIFT 20
+#define CRC_PLLX_BASE_DIVP_MASK (0x7 << CRC_PLLX_BASE_DIVP_SHIFT)
+#define CRC_PLLX_BASE_DIVN_SHIFT 8
+#define CRC_PLLX_BASE_DIVN_MASK (0x3ff << CRC_PLLX_BASE_DIVN_SHIFT)
+#define CRC_PLLX_BASE_DIVM_SHIFT 0
+#define CRC_PLLX_BASE_DIVM_MASK (0xf << CRC_PLLX_BASE_DIVM_SHIFT)
+
+#define CRC_PLLX_MISC 0x0e4
+#define CRC_PLLX_MISC_SETUP_SHIFT 24
+#define CRC_PLLX_MISC_SETUP_MASK (0xf << CRC_PLLX_MISC_SETUP_SHIFT)
+#define CRC_PLLX_MISC_PTS_SHIFT 22
+#define CRC_PLLX_MISC_PTS_MASK (0x3 << CRC_PLLX_MISC_PTS_SHIFT)
+#define CRC_PLLX_MISC_DCCON (1 << 20)
+#define CRC_PLLX_MISC_LOCK_ENABLE (1 << 18)
+#define CRC_PLLX_MISC_LOCK_SEL_SHIFT 12
+#define CRC_PLLX_MISC_LOCK_SEL_MASK (0x3f << CRC_PLLX_MISC_LOCK_SEL_SHIFT)
+#define CRC_PLLX_MISC_CPCON_SHIFT 8
+#define CRC_PLLX_MISC_CPCON_MASK (0xf << CRC_PLLX_MISC_CPCON_SHIFT)
+#define CRC_PLLX_MISC_LFCON_SHIFT 4
+#define CRC_PLLX_MISC_LFCON_MASK (0xf << CRC_PLLX_MISC_LFCON_SHIFT)
+#define CRC_PLLX_MISC_VCOCON_SHIFT 0
+#define CRC_PLLX_MISC_VCOCON_MASK (0xf << CRC_PLLX_MISC_VCOCON_SHIFT)
+
+#define CRC_RST_DEV_L_SET 0x300
+#define CRC_RST_DEV_L_SET_CACHE2 (1 << 31)
+#define CRC_RST_DEV_L_SET_VCP (1 << 29)
+#define CRC_RST_DEV_L_SET_HOST1X (1 << 28)
+#define CRC_RST_DEV_L_SET_DISP1 (1 << 27)
+#define CRC_RST_DEV_L_SET_DISP2 (1 << 26)
+#define CRC_RST_DEV_L_SET_IDE (1 << 25)
+#define CRC_RST_DEV_L_SET_3D (1 << 24)
+#define CRC_RST_DEV_L_SET_ISP (1 << 23)
+#define CRC_RST_DEV_L_SET_USBD (1 << 22)
+#define CRC_RST_DEV_L_SET_2D (1 << 21)
+#define CRC_RST_DEV_L_SET_VI (1 << 20)
+#define CRC_RST_DEV_L_SET_EPP (1 << 19)
+#define CRC_RST_DEV_L_SET_I2S2 (1 << 18)
+#define CRC_RST_DEV_L_SET_PWM (1 << 17)
+#define CRC_RST_DEV_L_SET_TWC (1 << 16)
+#define CRC_RST_DEV_L_SET_SDMMC4 (1 << 15)
+#define CRC_RST_DEV_L_SET_SDMMC1 (1 << 14)
+#define CRC_RST_DEV_L_SET_NDFLASH (1 << 13)
+#define CRC_RST_DEV_L_SET_I2C1 (1 << 12)
+#define CRC_RST_DEV_L_SET_I2S1 (1 << 11)
+#define CRC_RST_DEV_L_SET_SPDIF (1 << 10)
+#define CRC_RST_DEV_L_SET_SDMMC2 (1 << 9)
+#define CRC_RST_DEV_L_SET_GPIO (1 << 8)
+#define CRC_RST_DEV_L_SET_UART2 (1 << 7)
+#define CRC_RST_DEV_L_SET_UART1 (1 << 6)
+#define CRC_RST_DEV_L_SET_TMR (1 << 5)
+#define CRC_RST_DEV_L_SET_AC97 (1 << 3)
+#define CRC_RST_DEV_L_SET_SYS (1 << 2)
+#define CRC_RST_DEV_L_SET_COP (1 << 1)
+#define CRC_RST_DEV_L_SET_CPU (1 << 0)
+
+#define CRC_RST_DEV_L_CLR 0x304
+#define CRC_RST_DEV_L_CLR_CACHE2 (1 << 31)
+#define CRC_RST_DEV_L_CLR_VCP (1 << 29)
+#define CRC_RST_DEV_L_CLR_HOST1X (1 << 28)
+#define CRC_RST_DEV_L_CLR_DISP1 (1 << 27)
+#define CRC_RST_DEV_L_CLR_DISP2 (1 << 26)
+#define CRC_RST_DEV_L_CLR_IDE (1 << 25)
+#define CRC_RST_DEV_L_CLR_3D (1 << 24)
+#define CRC_RST_DEV_L_CLR_ISP (1 << 23)
+#define CRC_RST_DEV_L_CLR_USBD (1 << 22)
+#define CRC_RST_DEV_L_CLR_2D (1 << 21)
+#define CRC_RST_DEV_L_CLR_VI (1 << 20)
+#define CRC_RST_DEV_L_CLR_EPP (1 << 19)
+#define CRC_RST_DEV_L_CLR_I2S2 (1 << 18)
+#define CRC_RST_DEV_L_CLR_PWM (1 << 17)
+#define CRC_RST_DEV_L_CLR_TWC (1 << 16)
+#define CRC_RST_DEV_L_CLR_SDMMC4 (1 << 15)
+#define CRC_RST_DEV_L_CLR_SDMMC1 (1 << 14)
+#define CRC_RST_DEV_L_CLR_NDFLASH (1 << 13)
+#define CRC_RST_DEV_L_CLR_I2C1 (1 << 12)
+#define CRC_RST_DEV_L_CLR_I2S1 (1 << 11)
+#define CRC_RST_DEV_L_CLR_SPDIF (1 << 10)
+#define CRC_RST_DEV_L_CLR_SDMMC2 (1 << 9)
+#define CRC_RST_DEV_L_CLR_GPIO (1 << 8)
+#define CRC_RST_DEV_L_CLR_UART2 (1 << 7)
+#define CRC_RST_DEV_L_CLR_UART1 (1 << 6)
+#define CRC_RST_DEV_L_CLR_TMR (1 << 5)
+#define CRC_RST_DEV_L_CLR_AC97 (1 << 3)
+#define CRC_RST_DEV_L_CLR_SYS (1 << 2)
+#define CRC_RST_DEV_L_CLR_COP (1 << 1)
+#define CRC_RST_DEV_L_CLR_CPU (1 << 0)
+
+#define CRC_RST_CPU_CMPLX_SET 0x340
+
+#define CRC_RST_CPU_CMPLX_CLR 0x344
diff --git a/arch/arm/mach-tegra/include/mach/tegra20-pmc.h b/arch/arm/mach-tegra/include/mach/tegra20-pmc.h
index a905399..d56b845 100644
--- a/arch/arm/mach-tegra/include/mach/tegra20-pmc.h
+++ b/arch/arm/mach-tegra/include/mach/tegra20-pmc.h
@@ -35,3 +35,33 @@
#define PMC_CNTRL_RTC_RST (1 << 2)
#define PMC_CNTRL_RTC_CLK_DIS (1 << 1)
#define PMC_CNTRL_KBC_CLK_DIS (1 << 0)
+
+#define PMC_PWRGATE_TOGGLE 0x030
+#define PMC_PWRGATE_TOGGLE_PARTID_SHIFT 0
+#define PMC_PWRGATE_TOGGLE_PARTID_MASK (0x3 << PMC_PWRGATE_TOGGLE_PARTID_SHIFT)
+#define PMC_PWRGATE_TOGGLE_PARTID_CPU 0
+#define PMC_PWRGATE_TOGGLE_PARTID_TD 1
+#define PMC_PWRGATE_TOGGLE_PARTID_VE 2
+#define PMC_PWRGATE_TOGGLE_PARTID_PCX 3
+#define PMC_PWRGATE_TOGGLE_PARTID_VDE 4
+#define PMC_PWRGATE_TOGGLE_PARTID_L2C 5
+#define PMC_PWRGATE_TOGGLE_PARTID_MPE 6
+#define PMC_PWRGATE_TOGGLE_START (1 << 8)
+
+#define PMC_REMOVE_CLAMPING_CMD 0x034
+#define PMC_REMOVE_CLAMPING_CMD_MPE (1 << 6)
+#define PMC_REMOVE_CLAMPING_CMD_L2C (1 << 5)
+#define PMC_REMOVE_CLAMPING_CMD_PCX (1 << 4)
+#define PMC_REMOVE_CLAMPING_CMD_VDE (1 << 3)
+#define PMC_REMOVE_CLAMPING_CMD_VE (1 << 2)
+#define PMC_REMOVE_CLAMPING_CMD_TD (1 << 1)
+#define PMC_REMOVE_CLAMPING_CMD_CPU (1 << 0)
+
+#define PMC_PWRGATE_STATUS 0x038
+#define PMC_PWRGATE_STATUS_MPE (1 << 6)
+#define PMC_PWRGATE_STATUS_L2C (1 << 5)
+#define PMC_PWRGATE_STATUS_VDE (1 << 4)
+#define PMC_PWRGATE_STATUS_PCX (1 << 3)
+#define PMC_PWRGATE_STATUS_VE (1 << 2)
+#define PMC_PWRGATE_STATUS_TD (1 << 1)
+#define PMC_PWRGATE_STATUS_CPU (1 << 0)
diff --git a/arch/arm/mach-tegra/tegra_avp_init.c b/arch/arm/mach-tegra/tegra_avp_init.c
new file mode 100644
index 0000000..76164b5
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra_avp_init.c
@@ -0,0 +1,228 @@
+/*
+ * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * Partly based on code (C) Copyright 2010-2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/lowlevel.h>
+#include <mach/tegra20-car.h>
+#include <mach/tegra20-pmc.h>
+
+static inline void tegra_cpu_lowlevel_setup(void)
+{
+ uint32_t r;
+
+ /* set the cpu to SVC32 mode */
+ __asm__ __volatile__("mrs %0, cpsr":"=r"(r));
+ r &= ~0x1f;
+ r |= 0xd3;
+ __asm__ __volatile__("msr cpsr, %0" : : "r"(r));
+}
+
+/* instruct the PMIC to enable the CPU power rail */
+static void enable_maincomplex_powerrail(void)
+{
+ u32 reg;
+
+ reg = readl(TEGRA_PMC_BASE + PMC_CNTRL);
+ reg |= PMC_CNTRL_CPUPWRREQ_OE;
+ writel(reg, TEGRA_PMC_BASE);
+}
+
+/* put every core in the main CPU complex into reset state */
+static void assert_maincomplex_reset(int num_cores)
+{
+ u32 mask = 0;
+ int i;
+
+ for (i = 0; i < num_cores; i++) {
+ mask |= 0x1111 << i;
+ }
+
+ writel(mask, TEGRA_CLK_RESET_BASE + CRC_RST_CPU_CMPLX_SET);
+ writel(CRC_RST_DEV_L_SET_CPU, TEGRA_CLK_RESET_BASE + CRC_RST_DEV_L_SET);
+}
+
+/* release reset state of the first core of the main CPU complex */
+static void deassert_cpu0_reset(void)
+{
+ writel(0x1111, TEGRA_CLK_RESET_BASE + CRC_RST_CPU_CMPLX_CLR);
+ writel(CRC_RST_DEV_L_CLR_CPU, TEGRA_CLK_RESET_BASE + CRC_RST_DEV_L_CLR);
+}
+
+/* stop all internal and external clocks to the main CPU complex */
+static void stop_maincomplex_clocks(int num_cores)
+{
+ u32 reg;
+ int i;
+
+ reg = readl(TEGRA_CLK_RESET_BASE + CRC_CLK_CPU_CMPLX);
+ for (i = 0; i < num_cores; i++) {
+ reg |= 0x1 << (8 + i);
+ }
+ writel(reg, TEGRA_CLK_RESET_BASE + CRC_CLK_CPU_CMPLX);
+
+ reg = readl(TEGRA_CLK_RESET_BASE + CRC_CLK_OUT_ENB_L);
+ reg &= ~CRC_CLK_OUT_ENB_L_CPU;
+ writel(reg, TEGRA_CLK_RESET_BASE + CRC_CLK_OUT_ENB_L);
+}
+
+struct pll_config {
+ u16 divn;
+ u16 divm;
+ u16 divp;
+ u16 cpcon;
+};
+
+static struct pll_config pllx_config_table[][4] = {
+ {
+ {1000, 13, 0, 12}, /* OSC 13.0 MHz */
+ {625, 12, 0, 8 }, /* OSC 19.2 MHz */
+ {1000, 12, 0, 12}, /* OSC 12.0 MHz */
+ {1000, 26, 0, 12}, /* OSC 26.0 MHz */
+ }, /* TEGRA 20 */
+};
+
+static void init_pllx(void)
+{
+ struct pll_config *conf;
+ enum tegra_chiptype chiptype;
+ u8 osc_freq;
+ u32 reg;
+
+ /* If PLLX is already enabled, just return */
+ if (readl(TEGRA_CLK_RESET_BASE + CRC_PLLX_BASE) & CRC_PLLX_BASE_ENABLE)
+ return;
+
+ chiptype = tegra_get_chiptype();
+ if (chiptype < 0)
+ BUG();
+
+ osc_freq = (readl(TEGRA_CLK_RESET_BASE + CRC_OSC_CTRL) &
+ CRC_OSC_CTRL_OSC_FREQ_MASK) >> CRC_OSC_CTRL_OSC_FREQ_SHIFT;
+
+ conf = &pllx_config_table[chiptype][osc_freq];
+
+ /* set PLL bypass and frequency parameters */
+ reg = CRC_PLLX_BASE_BYPASS;
+ reg |= (conf->divm << CRC_PLLX_BASE_DIVM_SHIFT) &
+ CRC_PLLX_BASE_DIVM_MASK;
+ reg |= (conf->divn << CRC_PLLX_BASE_DIVN_SHIFT) &
+ CRC_PLLX_BASE_DIVN_MASK;
+ reg |= (conf->divp << CRC_PLLX_BASE_DIVP_SHIFT) &
+ CRC_PLLX_BASE_DIVP_MASK;
+ writel(reg, TEGRA_CLK_RESET_BASE + CRC_PLLX_BASE);
+
+ /* set chargepump parameters */
+ reg = (conf->cpcon << CRC_PLLX_MISC_CPCON_SHIFT) &
+ CRC_PLLX_MISC_CPCON_MASK;
+ if (conf->divn > 600)
+ reg |= CRC_PLLX_MISC_DCCON;
+ writel(reg, TEGRA_CLK_RESET_BASE + CRC_PLLX_MISC);
+
+ /* enable PLL and disable bypass */
+ reg = readl(TEGRA_CLK_RESET_BASE + CRC_PLLX_BASE);
+ reg |= CRC_PLLX_BASE_ENABLE;
+ reg &= ~CRC_PLLX_BASE_BYPASS;
+ writel(reg, TEGRA_CLK_RESET_BASE + CRC_PLLX_BASE);
+
+ /* enable PLL lock */
+ reg = readl(TEGRA_CLK_RESET_BASE + CRC_PLLX_MISC);
+ reg |= CRC_PLLX_MISC_LOCK_ENABLE;
+ writel(reg, TEGRA_CLK_RESET_BASE + CRC_PLLX_MISC);
+}
+
+/* start internal and external clocks to core 0 of the main CPU complex */
+static void start_cpu0_clocks(void)
+{
+ u32 reg;
+
+ /* setup PLLX */
+ init_pllx();
+
+ /* setup super CLK */
+ writel(CRC_SCLK_BURST_POLICY_SYS_STATE_RUN <<
+ CRC_SCLK_BURST_POLICY_SYS_STATE_SHIFT,
+ TEGRA_CLK_RESET_BASE + CRC_SCLK_BURST_POLICY);
+ writel(CRC_SUPER_SDIV_ENB, TEGRA_CLK_RESET_BASE + CRC_SUPER_SCLK_DIV);
+
+ /* deassert clock stop for cpu 0 */
+ reg = readl(TEGRA_CLK_RESET_BASE + CRC_CLK_CPU_CMPLX);
+ reg &= ~CRC_CLK_CPU_CMPLX_CPU0_CLK_STP;
+ writel(reg, TEGRA_CLK_RESET_BASE + CRC_CLK_CPU_CMPLX);
+
+ /* enable main CPU complex clock */
+ reg = readl(TEGRA_CLK_RESET_BASE + CRC_CLK_OUT_ENB_L);
+ reg |= CRC_CLK_OUT_ENB_L_CPU;
+ writel(reg, TEGRA_CLK_RESET_BASE + CRC_CLK_OUT_ENB_L);
+}
+
+static void maincomplex_powerup(void)
+{
+ u32 reg;
+
+ if (!(readl(TEGRA_PMC_BASE + PMC_PWRGATE_STATUS) &
+ PMC_PWRGATE_STATUS_CPU)) {
+ writel(PMC_PWRGATE_TOGGLE_START | PMC_PWRGATE_TOGGLE_PARTID_CPU,
+ TEGRA_PMC_BASE + PMC_PWRGATE_TOGGLE);
+
+ while (!(readl(TEGRA_PMC_BASE + PMC_PWRGATE_STATUS) &
+ PMC_PWRGATE_STATUS_CPU));
+
+ reg = readl(TEGRA_PMC_BASE + PMC_REMOVE_CLAMPING_CMD);
+ reg |= PMC_REMOVE_CLAMPING_CMD_CPU;
+ writel(reg, TEGRA_PMC_BASE + PMC_REMOVE_CLAMPING_CMD);
+ }
+}
+void barebox_arm_reset_vector(void)
+{
+ int num_cores;
+
+ /* minimal initialization, OK for both ARMv4 and ARMv7 */
+ tegra_cpu_lowlevel_setup();
+
+ /*
+ * If we are already running on the main CPU complex jump straight
+ * to the maincomplex entry point.
+ */
+ if (tegra_cpu_is_maincomplex())
+ tegra_maincomplex_entry();
+
+ /* get the number of cores in the main CPU complex of the current SoC */
+ num_cores = tegra_get_num_cores();
+ if (!num_cores)
+ BUG();
+
+ /* bring down main CPU complex (this may be a warm boot) */
+ enable_maincomplex_powerrail();
+ assert_maincomplex_reset(num_cores);
+ stop_maincomplex_clocks(num_cores);
+
+ /* set start address for the main CPU complex processors */
+ writel(barebox_arm_head, TEGRA_EXCEPTION_VECTORS_BASE + 0x100);
+
+ /* bring up main CPU complex */
+ start_cpu0_clocks();
+ maincomplex_powerup();
+ deassert_cpu0_reset();
+
+ /* assert AVP reset to stop execution here */
+ writel(CRC_RST_DEV_L_SET_COP, TEGRA_CLK_RESET_BASE + CRC_RST_DEV_L_SET);
+
+ unreachable();
+}
diff --git a/arch/arm/mach-tegra/tegra_maincomplex_init.c b/arch/arm/mach-tegra/tegra_maincomplex_init.c
new file mode 100644
index 0000000..dea9c91
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra_maincomplex_init.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <sizes.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+#include <mach/lowlevel.h>
+
+void tegra_maincomplex_entry(void)
+{
+ uint32_t rambase, ramsize;
+
+ arm_cpu_lowlevel_init();
+
+ switch (tegra_get_chiptype()) {
+ case TEGRA20:
+ rambase = 0x0;
+ ramsize = tegra20_get_ramsize();
+ break;
+ default:
+ /* If we don't know the chiptype, better bail out */
+ BUG();
+ }
+
+ /*
+ * The standard load address for Tegra systems is 0x10800 which means
+ * the barebox binary will always be below the malloc area for all
+ * reasonable malloc area sizes. We offset the RAM base address by 8MB
+ * to pretend barebox is in another bank.
+ */
+ barebox_arm_entry(rambase + SZ_8M, ramsize - SZ_8M, 0);
+}
--
1.8.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v3 08/10] tegra: add generic debug UART support
2013-04-02 6:19 Lucas Stach
` (6 preceding siblings ...)
2013-04-02 6:19 ` [PATCH v3 07/10] tegra: add common lowlevel startup Lucas Stach
@ 2013-04-02 6:19 ` Lucas Stach
2013-04-04 20:32 ` antonynpavlov
2013-04-02 6:19 ` [PATCH v3 09/10] tegra: add generic meminit Lucas Stach
2013-04-02 6:19 ` [PATCH v3 10/10] tegra: add GPIO controller driver Lucas Stach
9 siblings, 1 reply; 24+ messages in thread
From: Lucas Stach @ 2013-04-02 6:19 UTC (permalink / raw)
To: barebox
ODMdata tells us which UART to use for debugging purposes. This is
agreed upon in both the upstream Linux kernel and U-Boot, so do it the
same way in barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/boards/toshiba-ac100/Makefile | 1 -
arch/arm/boards/toshiba-ac100/serial.c | 39 ---------------------------
arch/arm/mach-tegra/include/mach/lowlevel.h | 34 ++++++++++++++++++++++++
arch/arm/mach-tegra/tegra20.c | 41 +++++++++++++++++++++++++++++
4 files changed, 75 insertions(+), 40 deletions(-)
delete mode 100644 arch/arm/boards/toshiba-ac100/serial.c
create mode 100644 arch/arm/mach-tegra/tegra20.c
diff --git a/arch/arm/boards/toshiba-ac100/Makefile b/arch/arm/boards/toshiba-ac100/Makefile
index 9e14763..dcfc293 100644
--- a/arch/arm/boards/toshiba-ac100/Makefile
+++ b/arch/arm/boards/toshiba-ac100/Makefile
@@ -1,2 +1 @@
obj-y += board.o
-obj-$(CONFIG_DRIVER_SERIAL_NS16550) += serial.o
diff --git a/arch/arm/boards/toshiba-ac100/serial.c b/arch/arm/boards/toshiba-ac100/serial.c
deleted file mode 100644
index 880270d..0000000
--- a/arch/arm/boards/toshiba-ac100/serial.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2011 Antony Pavlov <antonynpavlov@gmail.com>
- *
- * This file is part of barebox.
- * See file CREDITS for list of people who contributed to this project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <common.h>
-#include <types.h>
-#include <driver.h>
-#include <init.h>
-#include <ns16550.h>
-#include <asm/io.h>
-#include <asm/common.h>
-#include <mach/iomap.h>
-
-static struct NS16550_plat serial_plat = {
- .clock = 0x75 * 115200 * 16 /* MODE_X_DIV */,
- .shift = 2,
-};
-
-static int ac100_serial_console_init(void)
-{
- /* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, TEGRA_UARTA_BASE, 8 << serial_plat.shift,
- IORESOURCE_MEM_8BIT, &serial_plat);
-
- return 0;
-}
-console_initcall(ac100_serial_console_init);
diff --git a/arch/arm/mach-tegra/include/mach/lowlevel.h b/arch/arm/mach-tegra/include/mach/lowlevel.h
index bd1a8db..a24b8c2 100644
--- a/arch/arm/mach-tegra/include/mach/lowlevel.h
+++ b/arch/arm/mach-tegra/include/mach/lowlevel.h
@@ -35,6 +35,10 @@
#define T20_ODMDATA_RAMSIZE_SHIFT 28
#define T20_ODMDATA_RAMSIZE_MASK (3 << T20_ODMDATA_RAMSIZE_SHIFT)
+#define T20_ODMDATA_UARTTYPE_SHIFT 18
+#define T20_ODMDATA_UARTTYPE_MASK (3 << T20_ODMDATA_UARTTYPE_SHIFT)
+#define T20_ODMDATA_UARTID_SHIFT 15
+#define T20_ODMDATA_UARTID_MASK (7 << T20_ODMDATA_UARTID_SHIFT)
static inline u32 tegra_get_odmdata(void)
{
@@ -109,5 +113,35 @@ static inline uint32_t tegra20_get_ramsize(void)
}
}
+static long uart_id_to_base[] = {
+ TEGRA_UARTA_BASE,
+ TEGRA_UARTB_BASE,
+ TEGRA_UARTC_BASE,
+ TEGRA_UARTD_BASE,
+ TEGRA_UARTE_BASE,
+};
+
+static inline long tegra20_get_debuguart_base(void)
+{
+ u32 odmdata;
+ int id;
+
+ odmdata = tegra_get_odmdata();
+
+ /*
+ * Get type, we accept both "2" and "3", as they both demark a UART,
+ * depending on the board type.
+ */
+ if (!(((odmdata & T20_ODMDATA_UARTTYPE_MASK) >>
+ T20_ODMDATA_UARTTYPE_SHIFT) & 0x2))
+ return 0;
+
+ id = (odmdata & T20_ODMDATA_UARTID_MASK) >> T20_ODMDATA_UARTID_SHIFT;
+ if (id > ARRAY_SIZE(uart_id_to_base))
+ return 0;
+
+ return uart_id_to_base[id];
+}
+
/* reset vector for the main CPU complex */
void tegra_maincomplex_entry(void);
diff --git a/arch/arm/mach-tegra/tegra20.c b/arch/arm/mach-tegra/tegra20.c
new file mode 100644
index 0000000..9104c3b
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra20.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <ns16550.h>
+#include <mach/iomap.h>
+#include <mach/lowlevel.h>
+
+static struct NS16550_plat debug_uart = {
+ .clock = 216000000, /* pll_p rate */
+ .shift = 2,
+};
+
+static int tegra20_add_debug_console(void)
+{
+ unsigned long base;
+
+ base = tegra20_get_debuguart_base();
+ if (!base)
+ return -ENODEV;
+
+ add_ns16550_device(DEVICE_ID_DYNAMIC, base, TEGRA_UARTA_SIZE,
+ IORESOURCE_MEM_8BIT, &debug_uart);
+
+ return 0;
+}
+console_initcall(tegra20_add_debug_console);
--
1.8.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v3 09/10] tegra: add generic meminit
2013-04-02 6:19 Lucas Stach
` (7 preceding siblings ...)
2013-04-02 6:19 ` [PATCH v3 08/10] tegra: add generic debug UART support Lucas Stach
@ 2013-04-02 6:19 ` Lucas Stach
2013-04-02 6:19 ` [PATCH v3 10/10] tegra: add GPIO controller driver Lucas Stach
9 siblings, 0 replies; 24+ messages in thread
From: Lucas Stach @ 2013-04-02 6:19 UTC (permalink / raw)
To: barebox
ODMdata tells us how much RAM is installed, so no need to define this at
the board level.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/boards/toshiba-ac100/board.c | 8 --------
arch/arm/mach-tegra/tegra20.c | 9 +++++++++
2 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boards/toshiba-ac100/board.c b/arch/arm/boards/toshiba-ac100/board.c
index 0eb85c5..51232ef 100644
--- a/arch/arm/boards/toshiba-ac100/board.c
+++ b/arch/arm/boards/toshiba-ac100/board.c
@@ -23,14 +23,6 @@
#include <usb/ehci.h>
#include <mach/iomap.h>
-static int ac100_mem_init(void)
-{
- arm_add_mem_device("ram0", 0x0, SZ_512M);
-
- return 0;
-}
-mem_initcall(ac100_mem_init);
-
static struct ehci_platform_data ehci_pdata = {
.flags = EHCI_HAS_TT,
};
diff --git a/arch/arm/mach-tegra/tegra20.c b/arch/arm/mach-tegra/tegra20.c
index 9104c3b..2b95994 100644
--- a/arch/arm/mach-tegra/tegra20.c
+++ b/arch/arm/mach-tegra/tegra20.c
@@ -17,6 +17,7 @@
#include <common.h>
#include <init.h>
#include <ns16550.h>
+#include <asm/memory.h>
#include <mach/iomap.h>
#include <mach/lowlevel.h>
@@ -39,3 +40,11 @@ static int tegra20_add_debug_console(void)
return 0;
}
console_initcall(tegra20_add_debug_console);
+
+static int tegra20_mem_init(void)
+{
+ arm_add_mem_device("ram0", 0x0, tegra20_get_ramsize());
+
+ return 0;
+}
+mem_initcall(tegra20_mem_init);
--
1.8.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v3 10/10] tegra: add GPIO controller driver
2013-04-02 6:19 Lucas Stach
` (8 preceding siblings ...)
2013-04-02 6:19 ` [PATCH v3 09/10] tegra: add generic meminit Lucas Stach
@ 2013-04-02 6:19 ` Lucas Stach
2013-04-08 3:51 ` antonynpavlov
9 siblings, 1 reply; 24+ messages in thread
From: Lucas Stach @ 2013-04-02 6:19 UTC (permalink / raw)
To: barebox
Taken from the Linux kernel, simplified and reworked to match barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/Kconfig | 2 +
arch/arm/dts/tegra20.dtsi | 16 +++
arch/arm/mach-tegra/include/mach/gpio.h | 1 +
drivers/gpio/Kconfig | 7 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-tegra.c | 226 ++++++++++++++++++++++++++++++++
6 files changed, 253 insertions(+)
create mode 100644 arch/arm/mach-tegra/include/mach/gpio.h
create mode 100644 drivers/gpio/gpio-tegra.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e163e18..9151e66 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -142,6 +142,8 @@ config ARCH_TEGRA
select BUILTIN_DTB
select COMMON_CLK
select CLKDEV_LOOKUP
+ select GPIOLIB
+ select GPIO_TEGRA
select OFTREE
config ARCH_ZYNQ
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index 91858ec..b7d1e27 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -18,6 +18,22 @@
#clock-cells = <1>;
};
+ gpio: gpio {
+ compatible = "nvidia,tegra20-gpio";
+ reg = <0x6000d000 0x1000>;
+ interrupts = <0 32 0x04
+ 0 33 0x04
+ 0 34 0x04
+ 0 35 0x04
+ 0 55 0x04
+ 0 87 0x04
+ 0 89 0x04>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
pmc {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h
new file mode 100644
index 0000000..306ab4c
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/gpio.h
@@ -0,0 +1 @@
+#include <asm-generic/gpio.h>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ea07028..d5e0ed1 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -36,6 +36,13 @@ config GPIO_PL061
config GPIO_STMPE
depends on MFD_STMPE
bool "STMPE GPIO Expander"
+
+config GPIO_TEGRA
+ bool "GPIO support for the Tegra SoCs"
+ depends on ARCH_TEGRA
+ help
+ Say yes here to include the driver for the GPIO controller found on the
+ Tegra line of SoCs.
endmenu
endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 00acb68..5dcb6c8 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
+obj-$(CONFIG_GPIO_TEGRA) += gpio-tegra.o
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
new file mode 100644
index 0000000..55276f6
--- /dev/null
+++ b/drivers/gpio/gpio-tegra.c
@@ -0,0 +1,226 @@
+/* *
+ * Copyright (C) 2010 Erik Gilling <konkers@google.com>, Google, Inc
+ * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <gpio.h>
+#include <init.h>
+#include <io.h>
+#include <linux/err.h>
+
+#define GPIO_BANK(x) ((x) >> 5)
+#define GPIO_PORT(x) (((x) >> 3) & 0x3)
+#define GPIO_BIT(x) ((x) & 0x7)
+
+#define GPIO_REG(x) (GPIO_BANK(x) * config->bank_stride + \
+ GPIO_PORT(x) * 4)
+
+#define GPIO_CNF(x) (GPIO_REG(x) + 0x00)
+#define GPIO_OE(x) (GPIO_REG(x) + 0x10)
+#define GPIO_OUT(x) (GPIO_REG(x) + 0x20)
+#define GPIO_IN(x) (GPIO_REG(x) + 0x30)
+#define GPIO_INT_ENB(x) (GPIO_REG(x) + 0x50)
+
+#define GPIO_MSK_CNF(x) (GPIO_REG(x) + config->upper_offset + 0x00)
+#define GPIO_MSK_OE(x) (GPIO_REG(x) + config->upper_offset + 0x10)
+#define GPIO_MSK_OUT(x) (GPIO_REG(x) + config->upper_offset + 0X20)
+
+struct tegra_gpio_bank {
+ int bank;
+ int irq;
+};
+
+struct tegra_gpio_soc_config {
+ u32 bank_stride;
+ u32 upper_offset;
+ u32 bank_count;
+};
+
+static void __iomem *gpio_base;
+static struct tegra_gpio_soc_config *config;
+
+static inline void tegra_gpio_writel(u32 val, u32 reg)
+{
+ writel(val, gpio_base + reg);
+}
+
+static inline u32 tegra_gpio_readl(u32 reg)
+{
+ return readl(gpio_base + reg);
+}
+
+static int tegra_gpio_compose(int bank, int port, int bit)
+{
+ return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7);
+}
+
+static void tegra_gpio_mask_write(u32 reg, int gpio, int value)
+{
+ u32 val;
+
+ val = 0x100 << GPIO_BIT(gpio);
+ if (value)
+ val |= 1 << GPIO_BIT(gpio);
+ tegra_gpio_writel(val, reg);
+}
+
+static void tegra_gpio_enable(int gpio)
+{
+ tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1);
+}
+
+static void tegra_gpio_disable(int gpio)
+{
+ tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0);
+}
+
+static int tegra_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return 0;
+}
+
+static void tegra_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ tegra_gpio_disable(offset);
+}
+
+static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ tegra_gpio_mask_write(GPIO_MSK_OUT(offset), offset, value);
+}
+
+static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ /* If gpio is in output mode then read from the out value */
+ if ((tegra_gpio_readl(GPIO_OE(offset)) >> GPIO_BIT(offset)) & 1) {
+ printf("GPIO output mode\n");
+ return (tegra_gpio_readl(GPIO_OUT(offset)) >>
+ GPIO_BIT(offset)) & 0x1;
+ }
+
+ printf("GPIO input mode\n");
+ return (tegra_gpio_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
+}
+
+static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 0);
+ tegra_gpio_enable(offset);
+ return 0;
+}
+
+static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ tegra_gpio_set(chip, offset, value);
+ tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 1);
+ tegra_gpio_enable(offset);
+ return 0;
+}
+
+static struct gpio_ops tegra_gpio_ops = {
+ .request = tegra_gpio_request,
+ .free = tegra_gpio_free,
+ .direction_input = tegra_gpio_direction_input,
+ .direction_output = tegra_gpio_direction_output,
+ .get = tegra_gpio_get,
+ .set = tegra_gpio_set,
+};
+
+static struct gpio_chip tegra_gpio_chip = {
+ .ops = &tegra_gpio_ops,
+ .base = 0,
+};
+
+static int tegra_gpio_probe(struct device_d *dev)
+{
+ int i, j, ret;
+
+ ret = dev_get_drvdata(dev, (unsigned long *)&config);
+ if (ret) {
+ dev_err(dev, "dev_get_drvdata failed: %d\n", ret);
+ return ret;
+ }
+
+ gpio_base = dev_request_mem_region(dev, 0);
+ if (!gpio_base) {
+ dev_err(dev, "could not get memory region\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < config->bank_count; i++) {
+ for (j = 0; j < 4; j++) {
+ int gpio = tegra_gpio_compose(i, j, 0);
+ tegra_gpio_writel(0x00, GPIO_INT_ENB(gpio));
+ }
+ }
+
+ tegra_gpio_chip.ngpio = config->bank_count * 32;
+ tegra_gpio_chip.dev = dev;
+
+ gpiochip_add(&tegra_gpio_chip);
+
+ return 0;
+}
+
+static struct tegra_gpio_soc_config tegra20_gpio_config = {
+ .bank_stride = 0x80,
+ .upper_offset = 0x800,
+ .bank_count = 7,
+};
+
+static struct tegra_gpio_soc_config tegra30_gpio_config = {
+ .bank_stride = 0x100,
+ .upper_offset = 0x80,
+ .bank_count = 8,
+};
+
+static struct platform_device_id tegra_gpio_ids[] = {
+ {
+ .name = "tegra20-gpio",
+ .driver_data = (unsigned long)&tegra20_gpio_config,
+ }, {
+ .name = "tegra30-gpio",
+ .driver_data = (unsigned long)&tegra30_gpio_config,
+ }, {
+ /* sentinel */
+ },
+};
+
+static __maybe_unused struct of_device_id tegra_gpio_dt_ids[] = {
+ {
+ .compatible = "nvidia,tegra30-gpio",
+ .data = (unsigned long)&tegra30_gpio_config
+ }, {
+ .compatible = "nvidia,tegra20-gpio",
+ .data = (unsigned long)&tegra20_gpio_config
+ }, {
+ /* sentinel */
+ },
+};
+
+static struct driver_d tegra_gpio_driver = {
+ .name = "tegra-gpio",
+ .id_table = tegra_gpio_ids,
+ .of_compatible = DRV_OF_COMPAT(tegra_gpio_dt_ids),
+ .probe = tegra_gpio_probe,
+};
+
+static int __init tegra_gpio_init(void)
+{
+ return platform_driver_register(&tegra_gpio_driver);
+}
+coredevice_initcall(tegra_gpio_init);
--
1.8.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 03/10] tegra: switch to DT only
2013-04-02 6:19 ` [PATCH v3 03/10] tegra: switch to DT only Lucas Stach
@ 2013-04-02 11:42 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-04 20:39 ` antonynpavlov
1 sibling, 0 replies; 24+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-04-02 11:42 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On 08:19 Tue 02 Apr , Lucas Stach wrote:
> We will follow the Linux kernel and go devicetree only for Tegra. This
> doesn't prevent specific code for certain boards, but always requires a
> valid DTB for all boards.
>
> Also regenerate the AC100 defconfig to reflect this change.
>
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> ---
> arch/arm/Kconfig | 2 ++
> arch/arm/configs/toshiba_ac100_defconfig | 9 ++++++---
> arch/arm/dts/tegra20-paz00.dts | 12 ++++++++++++
> arch/arm/dts/tegra20.dtsi | 5 +++++
> 4 files changed, 25 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm/dts/tegra20-paz00.dts
> create mode 100644 arch/arm/dts/tegra20.dtsi
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 7d42826..8f37d12 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -139,6 +139,8 @@ config ARCH_TEGRA
> bool "Nvidia Tegra"
> select CPU_V7
> select HAS_DEBUG_LL
> + select BUILTIN_DTB
where does this come from>?
> + select OFTREE
>
> config ARCH_ZYNQ
> bool "Xilinx Zynq-based boards"
> diff --git a/arch/arm/configs/toshiba_ac100_defconfig b/arch/arm/configs/toshiba_ac100_defconfig
> index 065189d..b44fd26 100644
> --- a/arch/arm/configs/toshiba_ac100_defconfig
> +++ b/arch/arm/configs/toshiba_ac100_defconfig
> @@ -1,4 +1,5 @@
> -CONFIG_ARCH_TEGRA=y
> +CONFIG_BUILTIN_DTB=y
> +CONFIG_BUILTIN_DTB_NAME="tegra20-paz00"
> CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> CONFIG_TEXT_BASE=0x01000000
> CONFIG_BROKEN=y
> @@ -14,6 +15,7 @@ CONFIG_ENABLE_DEVICE_NOISE=y
> CONFIG_CMD_SLEEP=y
> # CONFIG_CMD_TRUE is not set
> # CONFIG_CMD_FALSE is not set
> +CONFIG_CMD_TFTP=y
> CONFIG_CMD_LOADB=y
> CONFIG_CMD_LOADY=y
> CONFIG_CMD_LOADS=y
> @@ -23,12 +25,12 @@ CONFIG_CMD_SHA1SUM=y
> CONFIG_CMD_BOOTM_SHOW_TYPE=y
> CONFIG_CMD_RESET=y
> CONFIG_CMD_GO=y
> +CONFIG_CMD_OFTREE=y
> CONFIG_NET=y
> CONFIG_NET_DHCP=y
> CONFIG_NET_PING=y
> -CONFIG_CMD_TFTP=y
> -CONFIG_FS_TFTP=y
> CONFIG_NET_NETCONSOLE=y
> +CONFIG_OFDEVICE=y
> CONFIG_DRIVER_SERIAL_NS16550=y
> CONFIG_NET_USB=y
> CONFIG_NET_USB_ASIX=y
> @@ -36,4 +38,5 @@ CONFIG_NET_USB_ASIX=y
> CONFIG_USB=y
> CONFIG_USB_EHCI=y
> CONFIG_USB_STORAGE=y
> +CONFIG_FS_TFTP=y
> CONFIG_FS_FAT=y
> diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts
> new file mode 100644
> index 0000000..09ccb8b
> --- /dev/null
> +++ b/arch/arm/dts/tegra20-paz00.dts
> @@ -0,0 +1,12 @@
> +/dts-v1/;
> +
> +/include/ "tegra20.dtsi"
> +
> +/ {
> + model = "Toshiba AC100 / Dynabook AZ";
> + compatible = "compal,paz00", "nvidia,tegra20";
> +
> + memory {
> + reg = <0x00000000 0x20000000>;
> + };
> +};
> diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
> new file mode 100644
> index 0000000..9f8860b
> --- /dev/null
> +++ b/arch/arm/dts/tegra20.dtsi
> @@ -0,0 +1,5 @@
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + compatible = "nvidia,tegra20";
> +};
> --
> 1.8.1.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 02/10] tegra: define TEGRA20 arch type
2013-04-02 6:19 ` [PATCH v3 02/10] tegra: define TEGRA20 arch type Lucas Stach
@ 2013-04-02 13:09 ` Antony Pavlov
2013-04-04 20:43 ` antonynpavlov
1 sibling, 0 replies; 24+ messages in thread
From: Antony Pavlov @ 2013-04-02 13:09 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On 02/04/2013, Lucas Stach <dev@lynxeye.de> wrote:
> Tegra is not a single arch type, but a collection of different
> generations. Define TEGAR20 arch type to differentiate between the
> generations. Switch to ARMv7 cpu type for all Tegras.
>
Actually you introduce at least four __INDEPENDENT___ changes in this patch:
1. CPU_ARM926T -> CPU_V7
2. bool "Nvidia Tegra-based boards" -> bool "Nvidia Tegra" (change
comment, unifyx with linux kernel --- very good;
3. Define TEGAR20;
4. change default ARCH_TEXT_BASE.
Can you split this commit, please?
Also I propose to use ARCH_TEGRA_2x_SOC (like in Linux kernel) instead
of MACH_TEGRA20.
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> ---
> arch/arm/Kconfig | 4 ++--
> arch/arm/mach-tegra/Kconfig | 20 ++++++++++++++++++--
> 2 files changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index bb9b47b..7d42826 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -136,8 +136,8 @@ config ARCH_VEXPRESS
> select COMMON_CLK
>
> config ARCH_TEGRA
> - bool "Nvidia Tegra-based boards"
> - select CPU_ARM926T
> + bool "Nvidia Tegra"
> + select CPU_V7
> select HAS_DEBUG_LL
>
> config ARCH_ZYNQ
> diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
> index eda786b..0adf4be 100644
> --- a/arch/arm/mach-tegra/Kconfig
> +++ b/arch/arm/mach-tegra/Kconfig
> @@ -1,11 +1,23 @@
> if ARCH_TEGRA
> +
> +choice
> + prompt "Tegra processor type"
> +
> +config MACH_TEGRA20
> + bool "Tegra 20"
> +
> +endchoice
> +
> +# ---------------------------------------------------------
> +
> +if MACH_TEGRA20
>
> config ARCH_TEXT_BASE
> hex
> - default 0x31fc0000
> + default 0x00108000
>
> choice
> - prompt "Tegra Board Type"
> + prompt "Tegra 20 Board Type"
>
> config MACH_TOSHIBA_AC100
> bool "Toshiba AC100"
> @@ -16,4 +28,8 @@ endchoice
>
> source arch/arm/boards/toshiba-ac100/Kconfig
>
> +endif #MACH_TEGRA20
> +
> +# ---------------------------------------------------------
> +
> endif
> --
> 1.8.1.4
>
>
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 08/10] tegra: add generic debug UART support
2013-04-02 6:19 ` [PATCH v3 08/10] tegra: add generic debug UART support Lucas Stach
@ 2013-04-04 20:32 ` antonynpavlov
2013-04-08 10:57 ` Lucas Stach
0 siblings, 1 reply; 24+ messages in thread
From: antonynpavlov @ 2013-04-04 20:32 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Tue, 2 Apr 2013 08:19:10 +0200
Lucas Stach <dev@lynxeye.de> wrote:
> ODMdata tells us which UART to use for debugging purposes. This is
> agreed upon in both the upstream Linux kernel and U-Boot, so do it the
> same way in barebox.
This patch disables serial console on my Toshiba AC100.
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> ---
> arch/arm/boards/toshiba-ac100/Makefile | 1 -
> arch/arm/boards/toshiba-ac100/serial.c | 39 ---------------------------
> arch/arm/mach-tegra/include/mach/lowlevel.h | 34 ++++++++++++++++++++++++
> arch/arm/mach-tegra/tegra20.c | 41 +++++++++++++++++++++++++++++
> 4 files changed, 75 insertions(+), 40 deletions(-)
> delete mode 100644 arch/arm/boards/toshiba-ac100/serial.c
> create mode 100644 arch/arm/mach-tegra/tegra20.c
>
> diff --git a/arch/arm/boards/toshiba-ac100/Makefile b/arch/arm/boards/toshiba-ac100/Makefile
> index 9e14763..dcfc293 100644
> --- a/arch/arm/boards/toshiba-ac100/Makefile
> +++ b/arch/arm/boards/toshiba-ac100/Makefile
> @@ -1,2 +1 @@
> obj-y += board.o
> -obj-$(CONFIG_DRIVER_SERIAL_NS16550) += serial.o
> diff --git a/arch/arm/boards/toshiba-ac100/serial.c b/arch/arm/boards/toshiba-ac100/serial.c
> deleted file mode 100644
> index 880270d..0000000
> --- a/arch/arm/boards/toshiba-ac100/serial.c
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -/*
> - * Copyright (C) 2011 Antony Pavlov <antonynpavlov@gmail.com>
> - *
> - * This file is part of barebox.
> - * See file CREDITS for list of people who contributed to this project.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2
> - * as published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - */
> -
> -#include <common.h>
> -#include <types.h>
> -#include <driver.h>
> -#include <init.h>
> -#include <ns16550.h>
> -#include <asm/io.h>
> -#include <asm/common.h>
> -#include <mach/iomap.h>
> -
> -static struct NS16550_plat serial_plat = {
> - .clock = 0x75 * 115200 * 16 /* MODE_X_DIV */,
> - .shift = 2,
> -};
> -
> -static int ac100_serial_console_init(void)
> -{
> - /* Register the serial port */
> - add_ns16550_device(DEVICE_ID_DYNAMIC, TEGRA_UARTA_BASE, 8 << serial_plat.shift,
> - IORESOURCE_MEM_8BIT, &serial_plat);
> -
> - return 0;
> -}
> -console_initcall(ac100_serial_console_init);
> diff --git a/arch/arm/mach-tegra/include/mach/lowlevel.h b/arch/arm/mach-tegra/include/mach/lowlevel.h
> index bd1a8db..a24b8c2 100644
> --- a/arch/arm/mach-tegra/include/mach/lowlevel.h
> +++ b/arch/arm/mach-tegra/include/mach/lowlevel.h
> @@ -35,6 +35,10 @@
>
> #define T20_ODMDATA_RAMSIZE_SHIFT 28
> #define T20_ODMDATA_RAMSIZE_MASK (3 << T20_ODMDATA_RAMSIZE_SHIFT)
> +#define T20_ODMDATA_UARTTYPE_SHIFT 18
> +#define T20_ODMDATA_UARTTYPE_MASK (3 << T20_ODMDATA_UARTTYPE_SHIFT)
> +#define T20_ODMDATA_UARTID_SHIFT 15
> +#define T20_ODMDATA_UARTID_MASK (7 << T20_ODMDATA_UARTID_SHIFT)
>
> static inline u32 tegra_get_odmdata(void)
> {
> @@ -109,5 +113,35 @@ static inline uint32_t tegra20_get_ramsize(void)
> }
> }
>
> +static long uart_id_to_base[] = {
> + TEGRA_UARTA_BASE,
> + TEGRA_UARTB_BASE,
> + TEGRA_UARTC_BASE,
> + TEGRA_UARTD_BASE,
> + TEGRA_UARTE_BASE,
> +};
> +
> +static inline long tegra20_get_debuguart_base(void)
> +{
> + u32 odmdata;
> + int id;
> +
> + odmdata = tegra_get_odmdata();
> +
> + /*
> + * Get type, we accept both "2" and "3", as they both demark a UART,
> + * depending on the board type.
> + */
> + if (!(((odmdata & T20_ODMDATA_UARTTYPE_MASK) >>
> + T20_ODMDATA_UARTTYPE_SHIFT) & 0x2))
> + return 0;
> +
> + id = (odmdata & T20_ODMDATA_UARTID_MASK) >> T20_ODMDATA_UARTID_SHIFT;
> + if (id > ARRAY_SIZE(uart_id_to_base))
> + return 0;
> +
> + return uart_id_to_base[id];
> +}
> +
> /* reset vector for the main CPU complex */
> void tegra_maincomplex_entry(void);
> diff --git a/arch/arm/mach-tegra/tegra20.c b/arch/arm/mach-tegra/tegra20.c
> new file mode 100644
> index 0000000..9104c3b
> --- /dev/null
> +++ b/arch/arm/mach-tegra/tegra20.c
> @@ -0,0 +1,41 @@
> +/*
> + * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <ns16550.h>
> +#include <mach/iomap.h>
> +#include <mach/lowlevel.h>
> +
> +static struct NS16550_plat debug_uart = {
> + .clock = 216000000, /* pll_p rate */
> + .shift = 2,
> +};
> +
> +static int tegra20_add_debug_console(void)
> +{
> + unsigned long base;
> +
> + base = tegra20_get_debuguart_base();
> + if (!base)
> + return -ENODEV;
> +
> + add_ns16550_device(DEVICE_ID_DYNAMIC, base, TEGRA_UARTA_SIZE,
> + IORESOURCE_MEM_8BIT, &debug_uart);
> +
> + return 0;
> +}
> +console_initcall(tegra20_add_debug_console);
> --
> 1.8.1.4
>
--
antonynpavlov@gmail.com <antonynpavlov@gmail.com>
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 03/10] tegra: switch to DT only
2013-04-02 6:19 ` [PATCH v3 03/10] tegra: switch to DT only Lucas Stach
2013-04-02 11:42 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2013-04-04 20:39 ` antonynpavlov
1 sibling, 0 replies; 24+ messages in thread
From: antonynpavlov @ 2013-04-04 20:39 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Tue, 2 Apr 2013 08:19:05 +0200
Lucas Stach <dev@lynxeye.de> wrote:
> We will follow the Linux kernel and go devicetree only for Tegra. This
> doesn't prevent specific code for certain boards, but always requires a
> valid DTB for all boards.
>
> Also regenerate the AC100 defconfig to reflect this change.
>
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> ---
> arch/arm/Kconfig | 2 ++
> arch/arm/configs/toshiba_ac100_defconfig | 9 ++++++---
> arch/arm/dts/tegra20-paz00.dts | 12 ++++++++++++
> arch/arm/dts/tegra20.dtsi | 5 +++++
> 4 files changed, 25 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm/dts/tegra20-paz00.dts
> create mode 100644 arch/arm/dts/tegra20.dtsi
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 7d42826..8f37d12 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -139,6 +139,8 @@ config ARCH_TEGRA
> bool "Nvidia Tegra"
> select CPU_V7
> select HAS_DEBUG_LL
> + select BUILTIN_DTB
> + select OFTREE
>
> config ARCH_ZYNQ
> bool "Xilinx Zynq-based boards"
> diff --git a/arch/arm/configs/toshiba_ac100_defconfig b/arch/arm/configs/toshiba_ac100_defconfig
> index 065189d..b44fd26 100644
> --- a/arch/arm/configs/toshiba_ac100_defconfig
> +++ b/arch/arm/configs/toshiba_ac100_defconfig
> @@ -1,4 +1,5 @@
> -CONFIG_ARCH_TEGRA=y
Why?
We will get this after 'make toshiba_ac100_defconfig':
CONFIG_ARCH_AT91=y
...
# CONFIG_ARCH_TEGRA is not set
> +CONFIG_BUILTIN_DTB=y
> +CONFIG_BUILTIN_DTB_NAME="tegra20-paz00"
> CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> CONFIG_TEXT_BASE=0x01000000
> CONFIG_BROKEN=y
> @@ -14,6 +15,7 @@ CONFIG_ENABLE_DEVICE_NOISE=y
> CONFIG_CMD_SLEEP=y
> # CONFIG_CMD_TRUE is not set
> # CONFIG_CMD_FALSE is not set
> +CONFIG_CMD_TFTP=y
> CONFIG_CMD_LOADB=y
> CONFIG_CMD_LOADY=y
> CONFIG_CMD_LOADS=y
> @@ -23,12 +25,12 @@ CONFIG_CMD_SHA1SUM=y
> CONFIG_CMD_BOOTM_SHOW_TYPE=y
> CONFIG_CMD_RESET=y
> CONFIG_CMD_GO=y
> +CONFIG_CMD_OFTREE=y
> CONFIG_NET=y
> CONFIG_NET_DHCP=y
> CONFIG_NET_PING=y
> -CONFIG_CMD_TFTP=y
> -CONFIG_FS_TFTP=y
> CONFIG_NET_NETCONSOLE=y
> +CONFIG_OFDEVICE=y
> CONFIG_DRIVER_SERIAL_NS16550=y
> CONFIG_NET_USB=y
> CONFIG_NET_USB_ASIX=y
> @@ -36,4 +38,5 @@ CONFIG_NET_USB_ASIX=y
> CONFIG_USB=y
> CONFIG_USB_EHCI=y
> CONFIG_USB_STORAGE=y
> +CONFIG_FS_TFTP=y
> CONFIG_FS_FAT=y
> diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts
> new file mode 100644
> index 0000000..09ccb8b
> --- /dev/null
> +++ b/arch/arm/dts/tegra20-paz00.dts
> @@ -0,0 +1,12 @@
> +/dts-v1/;
> +
> +/include/ "tegra20.dtsi"
> +
> +/ {
> + model = "Toshiba AC100 / Dynabook AZ";
> + compatible = "compal,paz00", "nvidia,tegra20";
> +
> + memory {
> + reg = <0x00000000 0x20000000>;
> + };
> +};
> diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
> new file mode 100644
> index 0000000..9f8860b
> --- /dev/null
> +++ b/arch/arm/dts/tegra20.dtsi
> @@ -0,0 +1,5 @@
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + compatible = "nvidia,tegra20";
> +};
> --
> 1.8.1.4
>
--
antonynpavlov@gmail.com <antonynpavlov@gmail.com>
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 02/10] tegra: define TEGRA20 arch type
2013-04-02 6:19 ` [PATCH v3 02/10] tegra: define TEGRA20 arch type Lucas Stach
2013-04-02 13:09 ` Antony Pavlov
@ 2013-04-04 20:43 ` antonynpavlov
1 sibling, 0 replies; 24+ messages in thread
From: antonynpavlov @ 2013-04-04 20:43 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Tue, 2 Apr 2013 08:19:04 +0200
Lucas Stach <dev@lynxeye.de> wrote:
> Tegra is not a single arch type, but a collection of different
> generations. Define TEGAR20 arch type to differentiate between the
> generations. Switch to ARMv7 cpu type for all Tegras.
>
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> ---
> arch/arm/Kconfig | 4 ++--
> arch/arm/mach-tegra/Kconfig | 20 ++++++++++++++++++--
> 2 files changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index bb9b47b..7d42826 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -136,8 +136,8 @@ config ARCH_VEXPRESS
> select COMMON_CLK
>
> config ARCH_TEGRA
> - bool "Nvidia Tegra-based boards"
> - select CPU_ARM926T
> + bool "Nvidia Tegra"
> + select CPU_V7
> select HAS_DEBUG_LL
>
> config ARCH_ZYNQ
> diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
> index eda786b..0adf4be 100644
> --- a/arch/arm/mach-tegra/Kconfig
> +++ b/arch/arm/mach-tegra/Kconfig
> @@ -1,11 +1,23 @@
> if ARCH_TEGRA
> +
Trailing whitespace here.
> +choice
> + prompt "Tegra processor type"
> +
> +config MACH_TEGRA20
> + bool "Tegra 20"
> +
> +endchoice
> +
> +# ---------------------------------------------------------
> +
> +if MACH_TEGRA20
>
> config ARCH_TEXT_BASE
> hex
> - default 0x31fc0000
> + default 0x00108000
>
> choice
> - prompt "Tegra Board Type"
> + prompt "Tegra 20 Board Type"
>
> config MACH_TOSHIBA_AC100
> bool "Toshiba AC100"
> @@ -16,4 +28,8 @@ endchoice
>
> source arch/arm/boards/toshiba-ac100/Kconfig
>
> +endif #MACH_TEGRA20
> +
> +# ---------------------------------------------------------
> +
> endif
> --
> 1.8.1.4
>
--
antonynpavlov@gmail.com <antonynpavlov@gmail.com>
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 10/10] tegra: add GPIO controller driver
2013-04-02 6:19 ` [PATCH v3 10/10] tegra: add GPIO controller driver Lucas Stach
@ 2013-04-08 3:51 ` antonynpavlov
0 siblings, 0 replies; 24+ messages in thread
From: antonynpavlov @ 2013-04-08 3:51 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Tue, 2 Apr 2013 08:19:12 +0200
Lucas Stach <dev@lynxeye.de> wrote:
> Taken from the Linux kernel, simplified and reworked to match barebox.
>
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> ---
> arch/arm/Kconfig | 2 +
> arch/arm/dts/tegra20.dtsi | 16 +++
> arch/arm/mach-tegra/include/mach/gpio.h | 1 +
> drivers/gpio/Kconfig | 7 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-tegra.c | 226 ++++++++++++++++++++++++++++++++
> 6 files changed, 253 insertions(+)
> create mode 100644 arch/arm/mach-tegra/include/mach/gpio.h
> create mode 100644 drivers/gpio/gpio-tegra.c
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index e163e18..9151e66 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -142,6 +142,8 @@ config ARCH_TEGRA
> select BUILTIN_DTB
> select COMMON_CLK
> select CLKDEV_LOOKUP
> + select GPIOLIB
> + select GPIO_TEGRA
> select OFTREE
>
> config ARCH_ZYNQ
> diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
> index 91858ec..b7d1e27 100644
> --- a/arch/arm/dts/tegra20.dtsi
> +++ b/arch/arm/dts/tegra20.dtsi
> @@ -18,6 +18,22 @@
> #clock-cells = <1>;
> };
>
> + gpio: gpio {
> + compatible = "nvidia,tegra20-gpio";
> + reg = <0x6000d000 0x1000>;
> + interrupts = <0 32 0x04
> + 0 33 0x04
> + 0 34 0x04
> + 0 35 0x04
> + 0 55 0x04
> + 0 87 0x04
> + 0 89 0x04>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + };
> +
> pmc {
> compatible = "nvidia,tegra20-pmc";
> reg = <0x7000e400 0x400>;
> diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h
> new file mode 100644
> index 0000000..306ab4c
> --- /dev/null
> +++ b/arch/arm/mach-tegra/include/mach/gpio.h
> @@ -0,0 +1 @@
> +#include <asm-generic/gpio.h>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index ea07028..d5e0ed1 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -36,6 +36,13 @@ config GPIO_PL061
> config GPIO_STMPE
> depends on MFD_STMPE
> bool "STMPE GPIO Expander"
> +
> +config GPIO_TEGRA
> + bool "GPIO support for the Tegra SoCs"
> + depends on ARCH_TEGRA
> + help
> + Say yes here to include the driver for the GPIO controller found on the
> + Tegra line of SoCs.
> endmenu
>
> endif
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 00acb68..5dcb6c8 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
> obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
> obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
> obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
> +obj-$(CONFIG_GPIO_TEGRA) += gpio-tegra.o
> diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
> new file mode 100644
> index 0000000..55276f6
> --- /dev/null
> +++ b/drivers/gpio/gpio-tegra.c
> @@ -0,0 +1,226 @@
> +/* *
> + * Copyright (C) 2010 Erik Gilling <konkers@google.com>, Google, Inc
> + * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <common.h>
> +#include <gpio.h>
> +#include <init.h>
> +#include <io.h>
> +#include <linux/err.h>
> +
> +#define GPIO_BANK(x) ((x) >> 5)
> +#define GPIO_PORT(x) (((x) >> 3) & 0x3)
> +#define GPIO_BIT(x) ((x) & 0x7)
> +
> +#define GPIO_REG(x) (GPIO_BANK(x) * config->bank_stride + \
> + GPIO_PORT(x) * 4)
> +
> +#define GPIO_CNF(x) (GPIO_REG(x) + 0x00)
> +#define GPIO_OE(x) (GPIO_REG(x) + 0x10)
> +#define GPIO_OUT(x) (GPIO_REG(x) + 0x20)
> +#define GPIO_IN(x) (GPIO_REG(x) + 0x30)
> +#define GPIO_INT_ENB(x) (GPIO_REG(x) + 0x50)
> +
> +#define GPIO_MSK_CNF(x) (GPIO_REG(x) + config->upper_offset + 0x00)
> +#define GPIO_MSK_OE(x) (GPIO_REG(x) + config->upper_offset + 0x10)
> +#define GPIO_MSK_OUT(x) (GPIO_REG(x) + config->upper_offset + 0X20)
> +
> +struct tegra_gpio_bank {
> + int bank;
> + int irq;
> +};
> +
> +struct tegra_gpio_soc_config {
> + u32 bank_stride;
> + u32 upper_offset;
> + u32 bank_count;
> +};
> +
> +static void __iomem *gpio_base;
> +static struct tegra_gpio_soc_config *config;
> +
> +static inline void tegra_gpio_writel(u32 val, u32 reg)
> +{
> + writel(val, gpio_base + reg);
> +}
> +
> +static inline u32 tegra_gpio_readl(u32 reg)
> +{
> + return readl(gpio_base + reg);
> +}
> +
> +static int tegra_gpio_compose(int bank, int port, int bit)
> +{
> + return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7);
> +}
> +
> +static void tegra_gpio_mask_write(u32 reg, int gpio, int value)
> +{
> + u32 val;
> +
> + val = 0x100 << GPIO_BIT(gpio);
> + if (value)
> + val |= 1 << GPIO_BIT(gpio);
> + tegra_gpio_writel(val, reg);
> +}
> +
> +static void tegra_gpio_enable(int gpio)
> +{
> + tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1);
> +}
> +
> +static void tegra_gpio_disable(int gpio)
> +{
> + tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0);
> +}
> +
> +static int tegra_gpio_request(struct gpio_chip *chip, unsigned offset)
> +{
> + return 0;
> +}
> +
> +static void tegra_gpio_free(struct gpio_chip *chip, unsigned offset)
> +{
> + tegra_gpio_disable(offset);
> +}
> +
> +static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
> +{
> + tegra_gpio_mask_write(GPIO_MSK_OUT(offset), offset, value);
> +}
> +
> +static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
> +{
> + /* If gpio is in output mode then read from the out value */
> + if ((tegra_gpio_readl(GPIO_OE(offset)) >> GPIO_BIT(offset)) & 1) {
> + printf("GPIO output mode\n");
> + return (tegra_gpio_readl(GPIO_OUT(offset)) >>
> + GPIO_BIT(offset)) & 0x1;
> + }
> +
> + printf("GPIO input mode\n");
> + return (tegra_gpio_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
> +}
> +
> +static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
> +{
> + tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 0);
> + tegra_gpio_enable(offset);
> + return 0;
> +}
> +
> +static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
> + int value)
> +{
> + tegra_gpio_set(chip, offset, value);
> + tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 1);
> + tegra_gpio_enable(offset);
> + return 0;
> +}
> +
> +static struct gpio_ops tegra_gpio_ops = {
> + .request = tegra_gpio_request,
> + .free = tegra_gpio_free,
> + .direction_input = tegra_gpio_direction_input,
> + .direction_output = tegra_gpio_direction_output,
> + .get = tegra_gpio_get,
> + .set = tegra_gpio_set,
> +};
> +
> +static struct gpio_chip tegra_gpio_chip = {
> + .ops = &tegra_gpio_ops,
> + .base = 0,
> +};
> +
> +static int tegra_gpio_probe(struct device_d *dev)
> +{
> + int i, j, ret;
> +
> + ret = dev_get_drvdata(dev, (unsigned long *)&config);
> + if (ret) {
> + dev_err(dev, "dev_get_drvdata failed: %d\n", ret);
> + return ret;
> + }
> +
> + gpio_base = dev_request_mem_region(dev, 0);
> + if (!gpio_base) {
> + dev_err(dev, "could not get memory region\n");
> + return -ENODEV;
> + }
> +
> + for (i = 0; i < config->bank_count; i++) {
> + for (j = 0; j < 4; j++) {
> + int gpio = tegra_gpio_compose(i, j, 0);
> + tegra_gpio_writel(0x00, GPIO_INT_ENB(gpio));
> + }
> + }
> +
> + tegra_gpio_chip.ngpio = config->bank_count * 32;
> + tegra_gpio_chip.dev = dev;
> +
> + gpiochip_add(&tegra_gpio_chip);
> +
> + return 0;
> +}
> +
> +static struct tegra_gpio_soc_config tegra20_gpio_config = {
> + .bank_stride = 0x80,
> + .upper_offset = 0x800,
> + .bank_count = 7,
> +};
> +
> +static struct tegra_gpio_soc_config tegra30_gpio_config = {
> + .bank_stride = 0x100,
> + .upper_offset = 0x80,
> + .bank_count = 8,
> +};
Hmmm, tegra30 support here... But we don't have tegra30 boards yet.
> +
> +static struct platform_device_id tegra_gpio_ids[] = {
> + {
> + .name = "tegra20-gpio",
> + .driver_data = (unsigned long)&tegra20_gpio_config,
> + }, {
> + .name = "tegra30-gpio",
> + .driver_data = (unsigned long)&tegra30_gpio_config,
and here ...
> + }, {
> + /* sentinel */
> + },
> +};
> +
> +static __maybe_unused struct of_device_id tegra_gpio_dt_ids[] = {
> + {
> + .compatible = "nvidia,tegra30-gpio",
> + .data = (unsigned long)&tegra30_gpio_config
> + }, {
and here.
> + .compatible = "nvidia,tegra20-gpio",
> + .data = (unsigned long)&tegra20_gpio_config
> + }, {
> + /* sentinel */
> + },
> +};
> +
> +static struct driver_d tegra_gpio_driver = {
> + .name = "tegra-gpio",
> + .id_table = tegra_gpio_ids,
> + .of_compatible = DRV_OF_COMPAT(tegra_gpio_dt_ids),
> + .probe = tegra_gpio_probe,
> +};
> +
> +static int __init tegra_gpio_init(void)
> +{
> + return platform_driver_register(&tegra_gpio_driver);
> +}
> +coredevice_initcall(tegra_gpio_init);
> --
> 1.8.1.4
>
--
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 08/10] tegra: add generic debug UART support
2013-04-04 20:32 ` antonynpavlov
@ 2013-04-08 10:57 ` Lucas Stach
2013-04-08 11:46 ` antonynpavlov
0 siblings, 1 reply; 24+ messages in thread
From: Lucas Stach @ 2013-04-08 10:57 UTC (permalink / raw)
To: antonynpavlov; +Cc: barebox
Hi Antony,
Am Freitag, den 05.04.2013, 00:32 +0400 schrieb antonynpavlov@gmail.com:
> On Tue, 2 Apr 2013 08:19:10 +0200
> Lucas Stach <dev@lynxeye.de> wrote:
>
> > ODMdata tells us which UART to use for debugging purposes. This is
> > agreed upon in both the upstream Linux kernel and U-Boot, so do it the
> > same way in barebox.
>
> This patch disables serial console on my Toshiba AC100.
>
Hm that's unfortunate, but I already suspected that your ODMdata might
be wrong.
What happens if you don't remove the serial init in your board? Do you
get a duplicate serial, or just your board defined one? If it still
works for you this way, we might take this as a compromise for now.
Regards,
Lucas
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 08/10] tegra: add generic debug UART support
2013-04-08 10:57 ` Lucas Stach
@ 2013-04-08 11:46 ` antonynpavlov
2013-04-08 12:24 ` Lucas Stach
0 siblings, 1 reply; 24+ messages in thread
From: antonynpavlov @ 2013-04-08 11:46 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Mon, 08 Apr 2013 12:57:26 +0200
Lucas Stach <dev@lynxeye.de> wrote:
> Hi Antony,
>
> Am Freitag, den 05.04.2013, 00:32 +0400 schrieb antonynpavlov@gmail.com:
> > On Tue, 2 Apr 2013 08:19:10 +0200
> > Lucas Stach <dev@lynxeye.de> wrote:
> >
> > > ODMdata tells us which UART to use for debugging purposes. This is
> > > agreed upon in both the upstream Linux kernel and U-Boot, so do it the
> > > same way in barebox.
> >
> > This patch disables serial console on my Toshiba AC100.
> >
> Hm that's unfortunate, but I already suspected that your ODMdata might
> be wrong.
> What happens if you don't remove the serial init in your board? Do you
> get a duplicate serial, or just your board defined one? If it still
> works for you this way, we might take this as a compromise for now.
IMHO, the right way is to get of_serial.c from linux and put some records
like this
uarta: serial@70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
nvidia,dma-request-selector = <&apbdma 8>;
clocks = <&tegra_car 6>;
status = "disabled";
};
to arch/arm/dts/tegra20.dtsi.
--
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 08/10] tegra: add generic debug UART support
2013-04-08 11:46 ` antonynpavlov
@ 2013-04-08 12:24 ` Lucas Stach
2013-04-08 13:03 ` antonynpavlov
0 siblings, 1 reply; 24+ messages in thread
From: Lucas Stach @ 2013-04-08 12:24 UTC (permalink / raw)
To: antonynpavlov; +Cc: barebox
Am Montag, den 08.04.2013, 15:46 +0400 schrieb antonynpavlov@gmail.com:
> On Mon, 08 Apr 2013 12:57:26 +0200
> Lucas Stach <dev@lynxeye.de> wrote:
>
> > Hi Antony,
> >
> > Am Freitag, den 05.04.2013, 00:32 +0400 schrieb antonynpavlov@gmail.com:
> > > On Tue, 2 Apr 2013 08:19:10 +0200
> > > Lucas Stach <dev@lynxeye.de> wrote:
> > >
> > > > ODMdata tells us which UART to use for debugging purposes. This is
> > > > agreed upon in both the upstream Linux kernel and U-Boot, so do it the
> > > > same way in barebox.
> > >
> > > This patch disables serial console on my Toshiba AC100.
> > >
> > Hm that's unfortunate, but I already suspected that your ODMdata might
> > be wrong.
> > What happens if you don't remove the serial init in your board? Do you
> > get a duplicate serial, or just your board defined one? If it still
> > works for you this way, we might take this as a compromise for now.
>
> IMHO, the right way is to get of_serial.c from linux and put some records
> like this
> uarta: serial@70006000 {
> compatible = "nvidia,tegra20-uart";
> reg = <0x70006000 0x40>;
> reg-shift = <2>;
> interrupts = <0 36 0x04>;
> nvidia,dma-request-selector = <&apbdma 8>;
> clocks = <&tegra_car 6>;
> status = "disabled";
> };
>
> to arch/arm/dts/tegra20.dtsi.
>
No, this doesn't help with the decision which UART barebox should use
for it's output. This is a configuration option and therefore not
allowed to reside in the DT, so NVIDIA decided to put this information
into the ODMdata. Both U-Boot and the Linux kernel(for earlyconsole) use
the information stored in this location.
You can always activate more consoles from board code or DT, but the
first/debug console should IMHO be handled the same way it's done in
Linux.
Regards,
Lucas
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 08/10] tegra: add generic debug UART support
2013-04-08 12:24 ` Lucas Stach
@ 2013-04-08 13:03 ` antonynpavlov
2013-04-08 13:34 ` Lucas Stach
2013-04-10 9:18 ` Lucas Stach
0 siblings, 2 replies; 24+ messages in thread
From: antonynpavlov @ 2013-04-08 13:03 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Mon, 08 Apr 2013 14:24:06 +0200
Lucas Stach <dev@lynxeye.de> wrote:
> Am Montag, den 08.04.2013, 15:46 +0400 schrieb antonynpavlov@gmail.com:
> > On Mon, 08 Apr 2013 12:57:26 +0200
> > Lucas Stach <dev@lynxeye.de> wrote:
> >
> > > Hi Antony,
> > >
> > > Am Freitag, den 05.04.2013, 00:32 +0400 schrieb antonynpavlov@gmail.com:
> > > > On Tue, 2 Apr 2013 08:19:10 +0200
> > > > Lucas Stach <dev@lynxeye.de> wrote:
> > > >
> > > > > ODMdata tells us which UART to use for debugging purposes. This is
> > > > > agreed upon in both the upstream Linux kernel and U-Boot, so do it the
> > > > > same way in barebox.
> > > >
> > > > This patch disables serial console on my Toshiba AC100.
> > > >
> > > Hm that's unfortunate, but I already suspected that your ODMdata might
> > > be wrong.
> > > What happens if you don't remove the serial init in your board? Do you
> > > get a duplicate serial, or just your board defined one? If it still
> > > works for you this way, we might take this as a compromise for now.
> >
> > IMHO, the right way is to get of_serial.c from linux and put some records
> > like this
> > uarta: serial@70006000 {
> > compatible = "nvidia,tegra20-uart";
> > reg = <0x70006000 0x40>;
> > reg-shift = <2>;
> > interrupts = <0 36 0x04>;
> > nvidia,dma-request-selector = <&apbdma 8>;
> > clocks = <&tegra_car 6>;
> > status = "disabled";
> > };
> >
> > to arch/arm/dts/tegra20.dtsi.
> >
>
> No, this doesn't help with the decision which UART barebox should use
> for it's output. This is a configuration option and therefore not
> allowed to reside in the DT, so NVIDIA decided to put this information
> into the ODMdata. Both U-Boot and the Linux kernel(for earlyconsole) use
> the information stored in this location.
>
> You can always activate more consoles from board code or DT, but the
> first/debug console should IMHO be handled the same way it's done in
> Linux.
Yes, this doesn't help to select the console UART, but it provide the
information about platform available UARTs.
The selection of console port is board-dependent (e.g. the chip can have
many UARTs, but the board can use only one of them), so let's move this
selection to board configuration section.
Moreother, Toshiba AC100 is a netbook (or smartbook :), in normal mode it
use keyboard and LCD screen for user interaction, not UART.
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 08/10] tegra: add generic debug UART support
2013-04-08 13:03 ` antonynpavlov
@ 2013-04-08 13:34 ` Lucas Stach
2013-04-10 9:18 ` Lucas Stach
1 sibling, 0 replies; 24+ messages in thread
From: Lucas Stach @ 2013-04-08 13:34 UTC (permalink / raw)
To: antonynpavlov; +Cc: barebox
Am Montag, den 08.04.2013, 17:03 +0400 schrieb antonynpavlov@gmail.com:
> On Mon, 08 Apr 2013 14:24:06 +0200
> Lucas Stach <dev@lynxeye.de> wrote:
>
> > Am Montag, den 08.04.2013, 15:46 +0400 schrieb antonynpavlov@gmail.com:
> > > On Mon, 08 Apr 2013 12:57:26 +0200
> > > Lucas Stach <dev@lynxeye.de> wrote:
> > >
> > > > Hi Antony,
> > > >
> > > > Am Freitag, den 05.04.2013, 00:32 +0400 schrieb antonynpavlov@gmail.com:
> > > > > On Tue, 2 Apr 2013 08:19:10 +0200
> > > > > Lucas Stach <dev@lynxeye.de> wrote:
> > > > >
> > > > > > ODMdata tells us which UART to use for debugging purposes. This is
> > > > > > agreed upon in both the upstream Linux kernel and U-Boot, so do it the
> > > > > > same way in barebox.
> > > > >
> > > > > This patch disables serial console on my Toshiba AC100.
> > > > >
> > > > Hm that's unfortunate, but I already suspected that your ODMdata might
> > > > be wrong.
> > > > What happens if you don't remove the serial init in your board? Do you
> > > > get a duplicate serial, or just your board defined one? If it still
> > > > works for you this way, we might take this as a compromise for now.
> > >
> > > IMHO, the right way is to get of_serial.c from linux and put some records
> > > like this
> > > uarta: serial@70006000 {
> > > compatible = "nvidia,tegra20-uart";
> > > reg = <0x70006000 0x40>;
> > > reg-shift = <2>;
> > > interrupts = <0 36 0x04>;
> > > nvidia,dma-request-selector = <&apbdma 8>;
> > > clocks = <&tegra_car 6>;
> > > status = "disabled";
> > > };
> > >
> > > to arch/arm/dts/tegra20.dtsi.
> > >
> >
> > No, this doesn't help with the decision which UART barebox should use
> > for it's output. This is a configuration option and therefore not
> > allowed to reside in the DT, so NVIDIA decided to put this information
> > into the ODMdata. Both U-Boot and the Linux kernel(for earlyconsole) use
> > the information stored in this location.
> >
> > You can always activate more consoles from board code or DT, but the
> > first/debug console should IMHO be handled the same way it's done in
> > Linux.
>
> Yes, this doesn't help to select the console UART, but it provide the
> information about platform available UARTs.
> The selection of console port is board-dependent (e.g. the chip can have
> many UARTs, but the board can use only one of them), so let's move this
> selection to board configuration section.
>
I see your point. Still I would like to be able to use the ODMdata on
boards that have a usable config there. I'll rework this patch to go the
same route as Linux earlyconsole config with a Kconfig select for the
DebugUART, where you can also opt to use the ODMdata defined one. I
think this will make everyone happy.
Regards,
Lucas
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 08/10] tegra: add generic debug UART support
2013-04-08 13:03 ` antonynpavlov
2013-04-08 13:34 ` Lucas Stach
@ 2013-04-10 9:18 ` Lucas Stach
2013-04-10 20:44 ` antonynpavlov
1 sibling, 1 reply; 24+ messages in thread
From: Lucas Stach @ 2013-04-10 9:18 UTC (permalink / raw)
To: antonynpavlov; +Cc: barebox
Am Montag, den 08.04.2013, 17:03 +0400 schrieb antonynpavlov@gmail.com:
> On Mon, 08 Apr 2013 14:24:06 +0200
> Lucas Stach <dev@lynxeye.de> wrote:
>
> > Am Montag, den 08.04.2013, 15:46 +0400 schrieb antonynpavlov@gmail.com:
> > > On Mon, 08 Apr 2013 12:57:26 +0200
> > > Lucas Stach <dev@lynxeye.de> wrote:
> > >
> > > > Hi Antony,
> > > >
> > > > Am Freitag, den 05.04.2013, 00:32 +0400 schrieb antonynpavlov@gmail.com:
> > > > > On Tue, 2 Apr 2013 08:19:10 +0200
> > > > > Lucas Stach <dev@lynxeye.de> wrote:
> > > > >
> > > > > > ODMdata tells us which UART to use for debugging purposes. This is
> > > > > > agreed upon in both the upstream Linux kernel and U-Boot, so do it the
> > > > > > same way in barebox.
> > > > >
> > > > > This patch disables serial console on my Toshiba AC100.
> > > > >
> > > > Hm that's unfortunate, but I already suspected that your ODMdata might
> > > > be wrong.
> > > > What happens if you don't remove the serial init in your board? Do you
> > > > get a duplicate serial, or just your board defined one? If it still
> > > > works for you this way, we might take this as a compromise for now.
> > >
> > > IMHO, the right way is to get of_serial.c from linux and put some records
> > > like this
> > > uarta: serial@70006000 {
> > > compatible = "nvidia,tegra20-uart";
> > > reg = <0x70006000 0x40>;
> > > reg-shift = <2>;
> > > interrupts = <0 36 0x04>;
> > > nvidia,dma-request-selector = <&apbdma 8>;
> > > clocks = <&tegra_car 6>;
> > > status = "disabled";
> > > };
> > >
> > > to arch/arm/dts/tegra20.dtsi.
> > >
> >
> > No, this doesn't help with the decision which UART barebox should use
> > for it's output. This is a configuration option and therefore not
> > allowed to reside in the DT, so NVIDIA decided to put this information
> > into the ODMdata. Both U-Boot and the Linux kernel(for earlyconsole) use
> > the information stored in this location.
> >
> > You can always activate more consoles from board code or DT, but the
> > first/debug console should IMHO be handled the same way it's done in
> > Linux.
>
> Yes, this doesn't help to select the console UART, but it provide the
> information about platform available UARTs.
> The selection of console port is board-dependent (e.g. the chip can have
> many UARTs, but the board can use only one of them), so let's move this
> selection to board configuration section.
>
> Moreother, Toshiba AC100 is a netbook (or smartbook :), in normal mode it
> use keyboard and LCD screen for user interaction, not UART.
>
The generic serial patch in the series v4 now introduces a Kconfig to
override the ODMdata value. I folded in the right config into the ac100
defconfig, so this patch should no longer break your console.
Also I fixed a bug that may lead to wrong ODMdata console detection, so
could you please test if it maybe also works with the automatic
detection for you now?
Regards,
Lucas
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 08/10] tegra: add generic debug UART support
2013-04-10 9:18 ` Lucas Stach
@ 2013-04-10 20:44 ` antonynpavlov
0 siblings, 0 replies; 24+ messages in thread
From: antonynpavlov @ 2013-04-10 20:44 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Wed, 10 Apr 2013 11:18:01 +0200
Lucas Stach <dev@lynxeye.de> wrote:
> Am Montag, den 08.04.2013, 17:03 +0400 schrieb antonynpavlov@gmail.com:
> > On Mon, 08 Apr 2013 14:24:06 +0200
> > Lucas Stach <dev@lynxeye.de> wrote:
> >
> > > Am Montag, den 08.04.2013, 15:46 +0400 schrieb antonynpavlov@gmail.com:
> > > > On Mon, 08 Apr 2013 12:57:26 +0200
> > > > Lucas Stach <dev@lynxeye.de> wrote:
> > > >
> > > > > Hi Antony,
> > > > >
> > > > > Am Freitag, den 05.04.2013, 00:32 +0400 schrieb antonynpavlov@gmail.com:
> > > > > > On Tue, 2 Apr 2013 08:19:10 +0200
> > > > > > Lucas Stach <dev@lynxeye.de> wrote:
> > > > > >
> > > > > > > ODMdata tells us which UART to use for debugging purposes. This is
> > > > > > > agreed upon in both the upstream Linux kernel and U-Boot, so do it the
> > > > > > > same way in barebox.
> > > > > >
> > > > > > This patch disables serial console on my Toshiba AC100.
> > > > > >
> > > > > Hm that's unfortunate, but I already suspected that your ODMdata might
> > > > > be wrong.
> > > > > What happens if you don't remove the serial init in your board? Do you
> > > > > get a duplicate serial, or just your board defined one? If it still
> > > > > works for you this way, we might take this as a compromise for now.
> > > >
> > > > IMHO, the right way is to get of_serial.c from linux and put some records
> > > > like this
> > > > uarta: serial@70006000 {
> > > > compatible = "nvidia,tegra20-uart";
> > > > reg = <0x70006000 0x40>;
> > > > reg-shift = <2>;
> > > > interrupts = <0 36 0x04>;
> > > > nvidia,dma-request-selector = <&apbdma 8>;
> > > > clocks = <&tegra_car 6>;
> > > > status = "disabled";
> > > > };
> > > >
> > > > to arch/arm/dts/tegra20.dtsi.
> > > >
> > >
> > > No, this doesn't help with the decision which UART barebox should use
> > > for it's output. This is a configuration option and therefore not
> > > allowed to reside in the DT, so NVIDIA decided to put this information
> > > into the ODMdata. Both U-Boot and the Linux kernel(for earlyconsole) use
> > > the information stored in this location.
> > >
> > > You can always activate more consoles from board code or DT, but the
> > > first/debug console should IMHO be handled the same way it's done in
> > > Linux.
> >
> > Yes, this doesn't help to select the console UART, but it provide the
> > information about platform available UARTs.
> > The selection of console port is board-dependent (e.g. the chip can have
> > many UARTs, but the board can use only one of them), so let's move this
> > selection to board configuration section.
> >
> > Moreother, Toshiba AC100 is a netbook (or smartbook :), in normal mode it
> > use keyboard and LCD screen for user interaction, not UART.
> >
> The generic serial patch in the series v4 now introduces a Kconfig to
> override the ODMdata value. I folded in the right config into the ac100
> defconfig, so this patch should no longer break your console.
>
> Also I fixed a bug that may lead to wrong ODMdata console detection, so
> could you please test if it maybe also works with the automatic
> detection for you now?
I have just checked your patches with
CONFIG_TEGRA_UART_ODMDATA=y
and with
CONFIG_TEGRA_UART_A=y
Both configurations work fine!
There is a very small issues (see my next messages), but IMHO, the patches are ready for commiting.
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2013-04-10 20:45 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-04-02 6:19 Lucas Stach
2013-04-02 6:19 ` [PATCH v3 01/10] tegra: pull in iomap.h from the Linux kernel Lucas Stach
2013-04-02 6:19 ` [PATCH v3 02/10] tegra: define TEGRA20 arch type Lucas Stach
2013-04-02 13:09 ` Antony Pavlov
2013-04-04 20:43 ` antonynpavlov
2013-04-02 6:19 ` [PATCH v3 03/10] tegra: switch to DT only Lucas Stach
2013-04-02 11:42 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-04 20:39 ` antonynpavlov
2013-04-02 6:19 ` [PATCH v3 04/10] tegra: add driver for the clock and reset module Lucas Stach
2013-04-02 6:19 ` [PATCH v3 05/10] tegra: add T20 timer driver Lucas Stach
2013-04-02 6:19 ` [PATCH v3 06/10] tegra: add T20 power management controller driver Lucas Stach
2013-04-02 6:19 ` [PATCH v3 07/10] tegra: add common lowlevel startup Lucas Stach
2013-04-02 6:19 ` [PATCH v3 08/10] tegra: add generic debug UART support Lucas Stach
2013-04-04 20:32 ` antonynpavlov
2013-04-08 10:57 ` Lucas Stach
2013-04-08 11:46 ` antonynpavlov
2013-04-08 12:24 ` Lucas Stach
2013-04-08 13:03 ` antonynpavlov
2013-04-08 13:34 ` Lucas Stach
2013-04-10 9:18 ` Lucas Stach
2013-04-10 20:44 ` antonynpavlov
2013-04-02 6:19 ` [PATCH v3 09/10] tegra: add generic meminit Lucas Stach
2013-04-02 6:19 ` [PATCH v3 10/10] tegra: add GPIO controller driver Lucas Stach
2013-04-08 3:51 ` antonynpavlov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox