From: "Alexander Shiyan" <shc_work@mail.ru>
To: "Eric B�nard" <eric@eukrea.com>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
barebox@lists.infradead.org
Subject: Re[3]: [PATCH 2/2] ARM: i.MX: Update MX51 iomux definitions
Date: Fri, 12 Apr 2013 14:36:09 +0400 [thread overview]
Message-ID: <1365762969.191898774@f250.mail.ru> (raw)
In-Reply-To: <1365519925.926164842@f101.mail.ru>
> > Le Tue, 09 Apr 2013 12:01:51 +0400,
> > Alexander Shiyan <shc_work@mail.ru> a écrit :
> >
> > > > > > On Sun, Apr 07, 2013 at 12:48:57PM +0400, Alexander Shiyan wrote:
> > > > > > > The patch updates MX51 iomux definitions from kernel.
> > > > > > >
> > > > > > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> > > > > >
> > > > > > This patch effectively reverts:
> > > > > >
> > > > > > commit 298d15571da8d1cb71e7fd87cc53cad3b2bf1d12
> > > > > > Author: Eric Bénard <eric@eukrea.com>
> > > > > > Date: Thu Sep 6 21:39:30 2012 +0200
> > > > > >
> > > > > > i.MX51: unbreak FEC iomux
> > > > > >
> > > > > > in commit 2bdc9f57a86dff41cfc1f87b644a2e53fdcce2b6 the iomux was synced
> > > > > > with the kernel but this leads to some changes in the PAD_CTRL of some
> > > > > > FEC pins leading to a non working FEC on our cpuimx51 board.
> > > > > >
> > > > > > This patch set back the PAD_CTRL of the missing pins to the initial
> > > > > > value.
> > > > > >
> > > > > > Signed-off-by: Eric Bénard <eric@eukrea.com>
> > > > > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > > > > >
> > > > > > You shouldn't do this.
> > > > >
> > > > > What about write a patch for the kernel for this?
> > > >
> > > > By the time I applied Erics patch I considered the days of the
> > > > traditional iomux support in the kernel counted. From that day on
> > > > we have to maintain our own versions anyway.
> > >
> > > OK. Maybe as temporary solution we can define eukrea_cpuimx51 FEC
> > > pins with NEW_PAD_CTRL macro? If so, I'll create a patch for this.
> > > This will keep iomux-mx51.h file synced.
> > >
> > Fine for me. Do you have a problem with these pads setting so that you
> > need to revert the change ?
> So, below is a temporary fixup.
>
> From 47d0d7b9c0355ba31e4c563891b2e9159dc07533 Mon Sep 17 00:00:00 2001
> From: Alexander Shiyan <shc_work@mail.ru>
> Date: Tue, 9 Apr 2013 19:01:40 +0400
> Subject: [PATCH] ARM: cpuimx51: Fix PAD_CTRLs for FEC
>
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
> arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c b/arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c
> index 5e77f90..523a805 100644
> --- a/arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c
> +++ b/arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c
> @@ -55,23 +55,23 @@ static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
> MX51_PAD_UART1_RTS__UART1_RTS,
> MX51_PAD_UART1_CTS__UART1_CTS,
> /* FEC */
> - MX51_PAD_DISP2_DAT1__FEC_RX_ER,
> + NEW_PAD_CTRL(MX51_PAD_DISP2_DAT1__FEC_RX_ER, MX51_PAD_CTRL_5),
> MX51_PAD_DISP2_DAT15__FEC_TDATA0,
> MX51_PAD_DISP2_DAT6__FEC_TDATA1,
> MX51_PAD_DISP2_DAT7__FEC_TDATA2,
> MX51_PAD_DISP2_DAT8__FEC_TDATA3,
> MX51_PAD_DISP2_DAT9__FEC_TX_EN,
> - MX51_PAD_DISP2_DAT10__FEC_COL,
> - MX51_PAD_DISP2_DAT11__FEC_RX_CLK,
> - MX51_PAD_DISP2_DAT12__FEC_RX_DV,
> + NEW_PAD_CTRL(MX51_PAD_DISP2_DAT10__FEC_COL, MX51_PAD_CTRL_5),
> + NEW_PAD_CTRL(MX51_PAD_DISP2_DAT11__FEC_RX_CLK, MX51_PAD_CTRL_5),
> + NEW_PAD_CTRL(MX51_PAD_DISP2_DAT12__FEC_RX_DV, MX51_PAD_CTRL_5),
> MX51_PAD_DISP2_DAT13__FEC_TX_CLK,
> MX51_PAD_DI2_PIN4__FEC_CRS,
> MX51_PAD_DI2_PIN2__FEC_MDC,
> - MX51_PAD_DI2_PIN3__FEC_MDIO,
> + NEW_PAD_CTRL(MX51_PAD_DI2_PIN3__FEC_MDIO, MX51_PAD_CTRL_5),
> MX51_PAD_DISP2_DAT14__FEC_RDATA0,
> MX51_PAD_DI2_DISP_CLK__FEC_RDATA1,
> - MX51_PAD_DI_GP4__FEC_RDATA2,
> - MX51_PAD_DISP2_DAT0__FEC_RDATA3,
> + NEW_PAD_CTRL(MX51_PAD_DI_GP4__FEC_RDATA2, MX51_PAD_CTRL_5),
> + NEW_PAD_CTRL(MX51_PAD_DISP2_DAT0__FEC_RDATA3, MX51_PAD_CTRL_5),
> MX51_PAD_DI_GP3__FEC_TX_ER,
> MX51_PAD_EIM_DTACK__GPIO2_31, /* LAN8700 reset pin */
> /* NAND */
> --
> 1.8.1.5
>
> ---
ping
---
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-04-12 10:36 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-07 8:48 [PATCH 1/2] ARM: i.MX: Update MX2x " Alexander Shiyan
2013-04-07 8:48 ` [PATCH 2/2] ARM: i.MX: Update MX51 " Alexander Shiyan
2013-04-09 6:49 ` Sascha Hauer
2013-04-09 6:52 ` Re[2]: " Alexander Shiyan
2013-04-09 7:31 ` Sascha Hauer
2013-04-09 8:01 ` Re[2]: " Alexander Shiyan
2013-04-09 8:03 ` Eric Bénard
2013-04-09 8:15 ` Re[2]: " Alexander Shiyan
2013-04-09 15:05 ` Alexander Shiyan
2013-04-12 10:36 ` Alexander Shiyan [this message]
2013-04-12 17:26 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365762969.191898774@f250.mail.ru \
--to=shc_work@mail.ru \
--cc=barebox@lists.infradead.org \
--cc=eric@eukrea.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox