From: Fabio Estevam <festevam@gmail.com>
To: s.hauer@pengutronix.de
Cc: Fabio Estevam <fabio.estevam@freescale.com>, barebox@lists.infradead.org
Subject: [PATCH] mx6-sabrelite: Setup CCM_CCOSR register
Date: Wed, 17 Apr 2013 15:35:43 -0300 [thread overview]
Message-ID: <1366223743-29178-1-git-send-email-festevam@gmail.com> (raw)
From: Fabio Estevam <fabio.estevam@freescale.com>
Setup CCM_CCOSR register to provide a CKO1 clock frequency of 16.5 MHz.
CKO1 drives sgtl5000 codec clock on mx6qsabrelite and doing this setup in the
bootloader will allow us to remove a lot of code in arch/arm/mach-imx/mach-imx6q.c
from the mainline kernel.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
| 11 +++++++++++
1 file changed, 11 insertions(+)
--git a/arch/arm/boards/freescale-mx6-sabrelite/flash_header.c b/arch/arm/boards/freescale-mx6-sabrelite/flash_header.c
index 61d482b..49326e0 100644
--- a/arch/arm/boards/freescale-mx6-sabrelite/flash_header.c
+++ b/arch/arm/boards/freescale-mx6-sabrelite/flash_header.c
@@ -152,6 +152,17 @@ struct imx_dcd_v2_entry __dcd_entry_section dcd_entry[] = {
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DCD(MX6_IOMUXC_BASE_ADDR + 0x018, 0x007f007f),
DCD(MX6_IOMUXC_BASE_ADDR + 0x01c, 0x007f007f),
+
+ /*
+ * Setup CCM_CCOSR register as follows:
+ *
+ * cko1_en = 1 --> CKO1 enabled
+ * cko1_div = 111 --> divide by 8
+ * cko1_sel = 1011 --> ahb_clk_root
+ *
+ * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+ */
+ DCD(MX6_CCM_BASE_ADDR + 0x060, 0x000000fb),
};
#define APP_DEST CONFIG_TEXT_BASE
--
1.7.9.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2013-04-17 18:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-17 18:35 Fabio Estevam [this message]
2013-04-18 9:12 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366223743-29178-1-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=fabio.estevam@freescale.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox