[PATCH 1/5] ARM: at91: dt: use #include for all device trees

mail archive of the barebox mailing list
 help / color / mirror / Atom feed

* [PATCH 1/5] ARM: at91: dt: use #include for all device trees
       [not found] <20130515135821.GG22508@game.jcrosoft.org>
@ 2013-05-15 13:59 ` Jean-Christophe PLAGNIOL-VILLARD
  2013-05-15 13:59   ` [PATCH 2/5] ARM: at91: dt: switch to standard GPIO flag defines Jean-Christophe PLAGNIOL-VILLARD
                     ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-05-15 13:59 UTC (permalink / raw)
  To: barebox

to prepare the switch to the macro.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boot/dts/aks-cdu.dts               |    2 +-
 arch/arm/boot/dts/animeo_ip.dts             |    2 +-
 arch/arm/boot/dts/at91-ariag25.dts          |    2 +-
 arch/arm/boot/dts/at91rm9200.dtsi           |    2 +-
 arch/arm/boot/dts/at91rm9200ek.dts          |    2 +-
 arch/arm/boot/dts/at91sam9260.dtsi          |    2 +-
 arch/arm/boot/dts/at91sam9263.dtsi          |    2 +-
 arch/arm/boot/dts/at91sam9263ek.dts         |    2 +-
 arch/arm/boot/dts/at91sam9g15.dtsi          |    2 +-
 arch/arm/boot/dts/at91sam9g15ek.dts         |    4 ++--
 arch/arm/boot/dts/at91sam9g20.dtsi          |    2 +-
 arch/arm/boot/dts/at91sam9g20ek.dts         |    2 +-
 arch/arm/boot/dts/at91sam9g20ek_2mmc.dts    |    2 +-
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi |    2 +-
 arch/arm/boot/dts/at91sam9g25.dtsi          |    2 +-
 arch/arm/boot/dts/at91sam9g25ek.dts         |    4 ++--
 arch/arm/boot/dts/at91sam9g35.dtsi          |    2 +-
 arch/arm/boot/dts/at91sam9g35ek.dts         |    4 ++--
 arch/arm/boot/dts/at91sam9g45.dtsi          |    2 +-
 arch/arm/boot/dts/at91sam9m10g45ek.dts      |    2 +-
 arch/arm/boot/dts/at91sam9n12.dtsi          |    2 +-
 arch/arm/boot/dts/at91sam9n12ek.dts         |    2 +-
 arch/arm/boot/dts/at91sam9x25.dtsi          |    2 +-
 arch/arm/boot/dts/at91sam9x25ek.dts         |    4 ++--
 arch/arm/boot/dts/at91sam9x35.dtsi          |    2 +-
 arch/arm/boot/dts/at91sam9x35ek.dts         |    4 ++--
 arch/arm/boot/dts/at91sam9x5.dtsi           |    2 +-
 arch/arm/boot/dts/at91sam9x5ek.dtsi         |    2 +-
 arch/arm/boot/dts/ethernut5.dts             |    2 +-
 arch/arm/boot/dts/evk-pro3.dts              |    4 ++--
 arch/arm/boot/dts/ge863-pro3.dtsi           |    2 +-
 arch/arm/boot/dts/kizbox.dts                |    4 ++--
 arch/arm/boot/dts/mpa1600.dts               |    2 +-
 arch/arm/boot/dts/pm9g45.dts                |    2 +-
 arch/arm/boot/dts/sama5d3.dtsi              |    2 +-
 arch/arm/boot/dts/sama5d31ek.dts            |    4 ++--
 arch/arm/boot/dts/sama5d33ek.dts            |    4 ++--
 arch/arm/boot/dts/sama5d34ek.dts            |    4 ++--
 arch/arm/boot/dts/sama5d35ek.dts            |    2 +-
 arch/arm/boot/dts/sama5d3xcm.dtsi           |    2 +-
 arch/arm/boot/dts/sama5d3xmb.dtsi           |    2 +-
 arch/arm/boot/dts/tny_a9260.dts             |    4 ++--
 arch/arm/boot/dts/tny_a9263.dts             |    2 +-
 arch/arm/boot/dts/tny_a9g20.dts             |    4 ++--
 arch/arm/boot/dts/usb_a9260.dts             |    4 ++--
 arch/arm/boot/dts/usb_a9263.dts             |    2 +-
 arch/arm/boot/dts/usb_a9g20.dts             |    4 ++--
 47 files changed, 61 insertions(+), 61 deletions(-)

diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
index 29b9f15..08b82a4 100644
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ b/arch/arm/boot/dts/aks-cdu.dts
@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-/include/ "ge863-pro3.dtsi"
+#include "ge863-pro3.dtsi"
 
 / {
 	chosen {
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 5160210..b765892 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -7,7 +7,7 @@
  */
 
 /dts-v1/;
-/include/ "at91sam9260.dtsi"
+#include "at91sam9260.dtsi"
 
 / {
 	model = "Somfy Animeo IP";
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index c7aebba..09beeb4 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -7,7 +7,7 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9g25.dtsi"
+#include "at91sam9g25.dtsi"
 
 / {
 	model = "Acme Systems Aria G25";
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 5d3ed5a..6329679 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -10,7 +10,7 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	model = "Atmel AT91RM9200 family SoC";
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index e586d85..5dffeb3 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -6,7 +6,7 @@
  * Licensed under GPLv2 only
  */
 /dts-v1/;
-/include/ "at91rm9200.dtsi"
+#include "at91rm9200.dtsi"
 
 / {
 	model = "Atmel AT91RM9200 evaluation kit";
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 70b5ccb..b130b3e 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -8,7 +8,7 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	model = "Atmel AT91SAM9260 family SoC";
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 94b58ab..89f4e94 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -6,7 +6,7 @@
  * Licensed under GPLv2 only.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	model = "Atmel AT91SAM9263 family SoC";
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 3b82d91..6b646d4 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -6,7 +6,7 @@
  * Licensed under GPLv2 only
  */
 /dts-v1/;
-/include/ "at91sam9263.dtsi"
+#include "at91sam9263.dtsi"
 
 / {
 	model = "Atmel at91sam9263ek";
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
index 28467fd..cfd7044 100644
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 
-/include/ "at91sam9x5.dtsi"
+#include "at91sam9x5.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G15 SoC";
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts
index 5427b2d..26b0444 100644
--- a/arch/arm/boot/dts/at91sam9g15ek.dts
+++ b/arch/arm/boot/dts/at91sam9g15ek.dts
@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9g15.dtsi"
-/include/ "at91sam9x5ek.dtsi"
+#include "at91sam9g15.dtsi"
+#include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G15-EK";
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 75ce6e7..b8e7946 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 
-/include/ "at91sam9260.dtsi"
+#include "at91sam9260.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G20 family SoC";
diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts
index e5324bf..3f15a3f 100644
--- a/arch/arm/boot/dts/at91sam9g20ek.dts
+++ b/arch/arm/boot/dts/at91sam9g20ek.dts
@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-/include/ "at91sam9g20ek_common.dtsi"
+#include "at91sam9g20ek_common.dtsi"
 
 / {
 	model = "Atmel at91sam9g20ek";
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
index 66467b1..942aa10 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
+++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-/include/ "at91sam9g20ek_common.dtsi"
+#include "at91sam9g20ek_common.dtsi"
 
 / {
 	model = "Atmel at91sam9g20ek 2 mmc";
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 6a92c5b..253960f 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -5,7 +5,7 @@
  *
  * Licensed under GPLv2.
  */
-/include/ "at91sam9g20.dtsi"
+#include "at91sam9g20.dtsi"
 
 / {
 
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
index 5fd32df..b4ec6fe 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 
-/include/ "at91sam9x5.dtsi"
+#include "at91sam9x5.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G25 SoC";
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index a1c511f..1e4c49c 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9g25.dtsi"
-/include/ "at91sam9x5ek.dtsi"
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G25-EK";
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index d6fa8af..bebf9f5 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 
-/include/ "at91sam9x5.dtsi"
+#include "at91sam9x5.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G35 SoC";
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts
index 6f58ab8..641a9bf 100644
--- a/arch/arm/boot/dts/at91sam9g35ek.dts
+++ b/arch/arm/boot/dts/at91sam9g35ek.dts
@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9g35.dtsi"
-/include/ "at91sam9x5ek.dtsi"
+#include "at91sam9g35.dtsi"
+#include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G35-EK";
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index bf18a73..18ea761 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -9,7 +9,7 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G45 family SoC";
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 51d9251b5..ba1205d 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -7,7 +7,7 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9g45.dtsi"
+#include "at91sam9g45.dtsi"
 
 / {
 	model = "Atmel AT91SAM9M10G45-EK";
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 3de8e6d..e848870 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -7,7 +7,7 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	model = "Atmel AT91SAM9N12 SoC";
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index d30e48b..b9e300e 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -7,7 +7,7 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9n12.dtsi"
+#include "at91sam9n12.dtsi"
 
 / {
 	model = "Atmel AT91SAM9N12-EK";
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
index 9ac2bc2..3f78d9b 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 
-/include/ "at91sam9x5.dtsi"
+#include "at91sam9x5.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X25 SoC";
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index 3b40d11..8ddbce0 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9x25.dtsi"
-/include/ "at91sam9x5ek.dtsi"
+#include "at91sam9x25.dtsi"
+#include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G25-EK";
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index ba67d83..1a3d525 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 
-/include/ "at91sam9x5.dtsi"
+#include "at91sam9x5.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X35 SoC";
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
index 6ad19a0..343d328 100644
--- a/arch/arm/boot/dts/at91sam9x35ek.dts
+++ b/arch/arm/boot/dts/at91sam9x35ek.dts
@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9x35.dtsi"
-/include/ "at91sam9x5ek.dtsi"
+#include "at91sam9x35.dtsi"
+#include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X35-EK";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 1145ac3..69b386f 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -9,7 +9,7 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	model = "Atmel AT91SAM9x5 family SoC";
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 1fa48d2..24781f2 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -6,7 +6,7 @@
  *
  * Licensed under GPLv2 or later.
  */
-/include/ "at91sam9x5cm.dtsi"
+#include "at91sam9x5cm.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X5-EK";
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
index 1ea9d34..2067c66 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-/include/ "at91sam9260.dtsi"
+#include "at91sam9260.dtsi"
 
 / {
 	model = "Ethernut 5";
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
index 96e50f5..eae2cd7 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-/include/ "ge863-pro3.dtsi"
+#include "ge863-pro3.dtsi"
 
 / {
 	model = "Telit EVK-PRO3 for Telit GE863-PRO3";
@@ -50,4 +50,4 @@
 		status = "okay";
 	};
 
-};
\ No newline at end of file
+};
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
index 17136fc..230099b 100644
--- a/arch/arm/boot/dts/ge863-pro3.dtsi
+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
@@ -7,7 +7,7 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "at91sam9260.dtsi"
+#include "at91sam9260.dtsi"
 
 / {
 	clocks {
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
index b4dc3ed..8328fed 100644
--- a/arch/arm/boot/dts/kizbox.dts
+++ b/arch/arm/boot/dts/kizbox.dts
@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-/include/ "at91sam9g20.dtsi"
+#include "at91sam9g20.dtsi"
 
 / {
 
@@ -137,4 +137,4 @@
 			gpio-key,wakeup;
 		};
 	};
-};
\ No newline at end of file
+};
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
index 3173008..f1b54a2 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/mpa1600.dts
@@ -6,7 +6,7 @@
  * Licensed under GPLv2 only
  */
 /dts-v1/;
-/include/ "at91rm9200.dtsi"
+#include "at91rm9200.dtsi"
 
 / {
 	model = "Phontech MPA 1600";
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
index 387fedb..639410b 100644
--- a/arch/arm/boot/dts/pm9g45.dts
+++ b/arch/arm/boot/dts/pm9g45.dts
@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-/include/ "at91sam9g45.dtsi"
+#include "at91sam9g45.dtsi"
 
 / {
 	model = "Ronetix pm9g45";
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 2e643ea..2293fa1 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -8,7 +8,7 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	model = "Atmel SAMA5D3 family SoC";
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts
index fa5d216..5bffd66 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/sama5d31ek.dts
@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "sama5d3xmb.dtsi"
-/include/ "sama5d3xdm.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D31-EK";
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts
index c38c943..99bd0c8 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/sama5d33ek.dts
@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "sama5d3xmb.dtsi"
-/include/ "sama5d3xdm.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D33-EK";
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
index 6bebfcd..d88ff72 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "sama5d3xmb.dtsi"
-/include/ "sama5d3xdm.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D34-EK";
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index a488fc4..3c364d2 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -7,7 +7,7 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "sama5d3xmb.dtsi"
+#include "sama5d3xmb.dtsi"
 
 / {
 	model = "Atmel SAMA5D35-EK";
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 1f8ed40..b552917 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -6,7 +6,7 @@
  *
  * Licensed under GPLv2 or later.
  */
-/include/ "sama5d3.dtsi"
+#include "sama5d3.dtsi"
 
 / {
 	compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 661d7ca..a5e7131 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -6,7 +6,7 @@
  *
  * Licensed under GPLv2 or later.
  */
-/include/ "sama5d3xcm.dtsi"
+#include "sama5d3xcm.dtsi"
 
 / {
 	compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts
index 367a16d..dabe232 100644
--- a/arch/arm/boot/dts/tny_a9260.dts
+++ b/arch/arm/boot/dts/tny_a9260.dts
@@ -6,8 +6,8 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-/include/ "at91sam9260.dtsi"
-/include/ "tny_a9260_common.dtsi"
+#include "at91sam9260.dtsi"
+#include "tny_a9260_common.dtsi"
 
 / {
 	model = "Calao TNY A9260";
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
index dee9c57..45f059b 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -6,7 +6,7 @@
  * Licensed under GPLv2 only
  */
 /dts-v1/;
-/include/ "at91sam9263.dtsi"
+#include "at91sam9263.dtsi"
 
 / {
 	model = "Calao TNY A9263";
diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts
index e1ab64c..8456d70 100644
--- a/arch/arm/boot/dts/tny_a9g20.dts
+++ b/arch/arm/boot/dts/tny_a9g20.dts
@@ -6,8 +6,8 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-/include/ "at91sam9g20.dtsi"
-/include/ "tny_a9260_common.dtsi"
+#include "at91sam9g20.dtsi"
+#include "tny_a9260_common.dtsi"
 
 / {
 	model = "Calao TNY A9G20";
diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts
index 2962160..a604107 100644
--- a/arch/arm/boot/dts/usb_a9260.dts
+++ b/arch/arm/boot/dts/usb_a9260.dts
@@ -6,8 +6,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9260.dtsi"
-/include/ "usb_a9260_common.dtsi"
+#include "at91sam9260.dtsi"
+#include "usb_a9260_common.dtsi"
 
 / {
 	model = "Calao USB A9260";
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 6fe05cc..82e204a 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -6,7 +6,7 @@
  * Licensed under GPLv2 only
  */
 /dts-v1/;
-/include/ "at91sam9263.dtsi"
+#include "at91sam9263.dtsi"
 
 / {
 	model = "Calao USB A9263";
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index 2dacb16c..c979c06 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -6,8 +6,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9g20.dtsi"
-/include/ "usb_a9260_common.dtsi"
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
 
 / {
 	model = "Calao USB A9G20";
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 2/5] ARM: at91: dt: switch to standard GPIO flag defines.
  2013-05-15 13:59 ` [PATCH 1/5] ARM: at91: dt: use #include for all device trees Jean-Christophe PLAGNIOL-VILLARD
@ 2013-05-15 13:59   ` Jean-Christophe PLAGNIOL-VILLARD
  2013-05-15 13:59   ` [PATCH 3/5] ARM: at91: dt: add pinctrl pre-processor define Jean-Christophe PLAGNIOL-VILLARD
                     ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-05-15 13:59 UTC (permalink / raw)
  To: barebox

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boot/dts/aks-cdu.dts               |   10 ++++-----
 arch/arm/boot/dts/animeo_ip.dts             |   16 +++++++-------
 arch/arm/boot/dts/at91-ariag25.dts          |    4 ++--
 arch/arm/boot/dts/at91rm9200.dtsi           |    9 ++++----
 arch/arm/boot/dts/at91rm9200ek.dts          |    8 +++----
 arch/arm/boot/dts/at91sam9260.dtsi          |    9 ++++----
 arch/arm/boot/dts/at91sam9263.dtsi          |    9 ++++----
 arch/arm/boot/dts/at91sam9263ek.dts         |   18 ++++++++--------
 arch/arm/boot/dts/at91sam9g20ek.dts         |    4 ++--
 arch/arm/boot/dts/at91sam9g20ek_2mmc.dts    |    6 +++---
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi |    8 +++----
 arch/arm/boot/dts/at91sam9g45.dtsi          |    9 ++++----
 arch/arm/boot/dts/at91sam9m10g45ek.dts      |   30 +++++++++++++--------------
 arch/arm/boot/dts/at91sam9n12.dtsi          |    9 ++++----
 arch/arm/boot/dts/at91sam9n12ek.dts         |   10 ++++-----
 arch/arm/boot/dts/at91sam9x5.dtsi           |   17 ++++++++-------
 arch/arm/boot/dts/at91sam9x5cm.dtsi         |    6 +++---
 arch/arm/boot/dts/at91sam9x5ek.dtsi         |    8 +++----
 arch/arm/boot/dts/ethernut5.dts             |    4 ++--
 arch/arm/boot/dts/evk-pro3.dts              |    2 +-
 arch/arm/boot/dts/kizbox.dts                |   12 +++++------
 arch/arm/boot/dts/mpa1600.dts               |    2 +-
 arch/arm/boot/dts/pm9g45.dts                |   14 ++++++-------
 arch/arm/boot/dts/sama5d3.dtsi              |    1 +
 arch/arm/boot/dts/sama5d31ek.dts            |    2 +-
 arch/arm/boot/dts/sama5d34ek.dts            |    2 +-
 arch/arm/boot/dts/sama5d35ek.dts            |    2 +-
 arch/arm/boot/dts/sama5d3xcm.dtsi           |    2 +-
 arch/arm/boot/dts/sama5d3xmb.dtsi           |   12 +++++------
 arch/arm/boot/dts/tny_a9263.dts             |    2 +-
 arch/arm/boot/dts/usb_a9260_common.dtsi     |    6 +++---
 arch/arm/boot/dts/usb_a9263.dts             |    6 +++---
 arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi    |   22 ++++++++++----------
 33 files changed, 144 insertions(+), 137 deletions(-)

diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
index 08b82a4..54cb5cf 100644
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ b/arch/arm/boot/dts/aks-cdu.dts
@@ -46,7 +46,7 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 15 0>;
+				atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 		};
@@ -90,23 +90,23 @@
 		compatible = "gpio-leds";
 
 		red {
-			gpios = <&pioC 10 0>;
+			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "none";
 		};
 
 		green {
-			gpios = <&pioA 5 1>;
+			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		yellow {
-			gpios = <&pioB 20 1>;
+			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
 		blue {
-			gpios = <&pioB 21 1>;
+			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 	};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index b765892..3a1de9e 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -123,7 +123,7 @@
 
 		usb0: ohci@00500000 {
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioB 15 1>;
+			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
 			status = "okay";
 		};
 	};
@@ -133,23 +133,23 @@
 
 		power_green {
 			label = "power_green";
-			gpios = <&pioC 17 0>;
+			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		power_red {
 			label = "power_red";
-			gpios = <&pioA 2 0>;
+			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		tx_green {
 			label = "tx_green";
-			gpios = <&pioC 19 0>;
+			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
 		};
 
 		tx_red {
 			label = "tx_red";
-			gpios = <&pioC 18 0>;
+			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -160,21 +160,21 @@
 
 		keyswitch_in {
 			label = "keyswitch_in";
-			gpios = <&pioB 1 0>;
+			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <28>;
 			gpio-key,wakeup;
 		};
 
 		error_in {
 			label = "error_in";
-			gpios = <&pioB 2 0>;
+			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <29>;
 			gpio-key,wakeup;
 		};
 
 		btn {
 			label = "btn";
-			gpios = <&pioC 23 0>;
+			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
 			linux,code = <31>;
 			gpio-key,wakeup;
 		};
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index 09beeb4..5ede767 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -156,7 +156,7 @@
 		/* little green LED in middle of Aria G25 module */
 		aria_led {
 			label = "aria_led";
-			gpios = <&pioB 8 0>; /* PB8 */
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
 			linux,default-trigger = "heartbeat";
 		};
 
@@ -164,7 +164,7 @@
 
 	onewire@0 {
 		compatible = "w1-gpio";
-		gpios = <&pioA 21 1>;
+		gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_w1_0>;
 	};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 6329679..7ebfe6c 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -11,6 +11,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel AT91RM9200 family SoC";
@@ -503,9 +504,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			nand-ecc-mode = "soft";
-			gpios = <&pioC 2 0
+			gpios = <&pioC 2 GPIO_ACTIVE_HIGH
 				 0
-				 &pioB 1 0
+				 &pioB 1 GPIO_ACTIVE_HIGH
 				>;
 			status = "disabled";
 		};
@@ -520,8 +521,8 @@
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 25 0 /* sda */
-			 &pioA 26 0 /* scl */
+		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index 5dffeb3..1405812 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -50,7 +50,7 @@
 			};
 
 			usb1: gadget@fffb0000 {
-				atmel,vbus-gpio = <&pioD 4 0>;
+				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 		};
@@ -66,19 +66,19 @@
 
 		ds2 {
 			label = "green";
-			gpios = <&pioB 0 0x1>;
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
 		ds4 {
 			label = "yellow";
-			gpios = <&pioB 1 0x1>;
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		ds6 {
 			label = "red";
-			gpios = <&pioB 2 0x1>;
+			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index b130b3e..717625d 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -9,6 +9,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel AT91SAM9260 family SoC";
@@ -567,8 +568,8 @@
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioC 13 0
-				 &pioC 14 0
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH
+				 &pioC 14 GPIO_ACTIVE_HIGH
 				 0
 				>;
 			status = "disabled";
@@ -584,8 +585,8 @@
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 23 0 /* sda */
-			 &pioA 24 0 /* scl */
+		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 89f4e94..5edfadf 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel AT91SAM9263 family SoC";
@@ -515,8 +516,8 @@
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioA 22 0
-				 &pioD 15 0
+			gpios = <&pioA 22 GPIO_ACTIVE_HIGH
+				 &pioD 15 GPIO_ACTIVE_HIGH
 				 0
 				>;
 			status = "disabled";
@@ -532,8 +533,8 @@
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioB 4 0 /* sda */
-			 &pioB 5 0 /* scl */
+		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
+			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 6b646d4..e1942ec 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -51,7 +51,7 @@
 			};
 
 			usb1: gadget@fff78000 {
-				atmel,vbus-gpio = <&pioA 25 0>;
+				atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
@@ -65,8 +65,8 @@
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioE 18 0>;
-					wp-gpios = <&pioE 19 0>;
+					cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -141,8 +141,8 @@
 		usb0: ohci@00a00000 {
 			num-ports = <2>;
 			status = "okay";
-			atmel,vbus-gpio = <&pioA 24 0
-					   &pioA 21 0
+			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
+					   &pioA 21 GPIO_ACTIVE_HIGH
 					  >;
 		};
 	};
@@ -152,13 +152,13 @@
 
 		d3 {
 			label = "d3";
-			gpios = <&pioB 7 0>;
+			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		d2 {
 			label = "d2";
-			gpios = <&pioC 29 1>;
+			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 	};
@@ -168,14 +168,14 @@
 
 		left_click {
 			label = "left_click";
-			gpios = <&pioC 5 1>;
+			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			gpio-key,wakeup;
 		};
 
 		right_click {
 			label = "right_click";
-			gpios = <&pioC 4 1>;
+			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			gpio-key,wakeup;
 		};
diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts
index 3f15a3f..bbfd753 100644
--- a/arch/arm/boot/dts/at91sam9g20ek.dts
+++ b/arch/arm/boot/dts/at91sam9g20ek.dts
@@ -17,13 +17,13 @@
 
 		ds1 {
 			label = "ds1";
-			gpios = <&pioA 9 0>;
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		ds5 {
 			label = "ds5";
-			gpios = <&pioA 6 1>;
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
index 942aa10..ec108b9 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
+++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
@@ -23,7 +23,7 @@
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioC 2 0>;
+					cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -43,13 +43,13 @@
 
 		ds1 {
 			label = "ds1";
-			gpios = <&pioB 9 0>;
+			gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		ds5 {
 			label = "ds5";
-			gpios = <&pioB 8 1>;
+			gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 253960f..7933839 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -65,7 +65,7 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
@@ -79,7 +79,7 @@
 				slot@1 {
 					reg = <1>;
 					bus-width = <4>;
-					cd-gpios = <&pioC 9 0>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -180,14 +180,14 @@
 
 		btn3 {
 			label = "Button 3";
-			gpios = <&pioA 30 1>;
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
 			gpio-key,wakeup;
 		};
 
 		btn4 {
 			label = "Button 4";
-			gpios = <&pioA 31 1>;
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
 			gpio-key,wakeup;
 		};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 18ea761..5d7c1f7 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel AT91SAM9G45 family SoC";
@@ -592,8 +593,8 @@
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioC 8 0
-				 &pioC 14 0
+			gpios = <&pioC 8 GPIO_ACTIVE_HIGH
+				 &pioC 14 GPIO_ACTIVE_HIGH
 				 0
 				>;
 			status = "disabled";
@@ -616,8 +617,8 @@
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 20 0 /* sda */
-			 &pioA 21 0 /* scl */
+		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index ba1205d..85e9c5e 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -68,7 +68,7 @@
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 10 0>;
+					cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -81,8 +81,8 @@
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 11 0>;
-					wp-gpios = <&pioD 29 0>;
+					cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -139,8 +139,8 @@
 		usb0: ohci@00700000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 1 1
-					   &pioD 3 1>;
+			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
+					   &pioD 3 GPIO_ACTIVE_LOW>;
 		};
 
 		usb1: ehci@00800000 {
@@ -153,19 +153,19 @@
 
 		d8 {
 			label = "d8";
-			gpios = <&pioD 30 0>;
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		d6 {
 			label = "d6";
-			gpios = <&pioD 0 1>;
+			gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		d7 {
 			label = "d7";
-			gpios = <&pioD 31 1>;
+			gpios = <&pioD 31 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 	};
@@ -175,45 +175,45 @@
 
 		left_click {
 			label = "left_click";
-			gpios = <&pioB 6 1>;
+			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			gpio-key,wakeup;
 		};
 
 		right_click {
 			label = "right_click";
-			gpios = <&pioB 7 1>;
+			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			gpio-key,wakeup;
 		};
 
 		left {
 			label = "Joystick Left";
-			gpios = <&pioB 14 1>;
+			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
 			linux,code = <105>;
 		};
 
 		right {
 			label = "Joystick Right";
-			gpios = <&pioB 15 1>;
+			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
 			linux,code = <106>;
 		};
 
 		up {
 			label = "Joystick Up";
-			gpios = <&pioB 16 1>;
+			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
 			linux,code = <103>;
 		};
 
 		down {
 			label = "Joystick Down";
-			gpios = <&pioB 17 1>;
+			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
 			linux,code = <108>;
 		};
 
 		enter {
 			label = "Joystick Press";
-			gpios = <&pioB 18 1>;
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index e848870..5205403 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -8,6 +8,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel AT91SAM9N12 SoC";
@@ -438,8 +439,8 @@
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioD 5 0
-				 &pioD 4 0
+			gpios = <&pioD 5 GPIO_ACTIVE_HIGH
+				 &pioD 4 GPIO_ACTIVE_HIGH
 				 0
 				>;
 			status = "disabled";
@@ -455,8 +456,8 @@
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 30 0 /* sda */
-			 &pioA 31 0 /* scl */
+		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index b9e300e..8eece27 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -55,7 +55,7 @@
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioA 7 0>;
+					cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -95,19 +95,19 @@
 
 		d8 {
 			label = "d8";
-			gpios = <&pioB 4 1>;
+			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
 		d9 {
 			label = "d6";
-			gpios = <&pioB 5 1>;
+			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		d10 {
 			label = "d7";
-			gpios = <&pioB 6 0>;
+			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -117,7 +117,7 @@
 
 		enter {
 			label = "Enter";
-			gpios = <&pioB 4 1>;
+			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
 			gpio-key,wakeup;
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 69b386f..949b8ea 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel AT91SAM9x5 family SoC";
@@ -664,8 +665,8 @@
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioD 5 0
-				 &pioD 4 0
+			gpios = <&pioD 5 GPIO_ACTIVE_HIGH
+				 &pioD 4 GPIO_ACTIVE_HIGH
 				 0
 				>;
 			status = "disabled";
@@ -688,8 +689,8 @@
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 30 0 /* sda */
-			 &pioA 31 0 /* scl */
+		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
@@ -703,8 +704,8 @@
 
 	i2c@1 {
 		compatible = "i2c-gpio";
-		gpios = <&pioC 0 0 /* sda */
-			 &pioC 1 0 /* scl */
+		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
+			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
@@ -718,8 +719,8 @@
 
 	i2c@2 {
 		compatible = "i2c-gpio";
-		gpios = <&pioB 4 0 /* sda */
-			 &pioB 5 0 /* scl */
+		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
+			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 347a74a..94723c3 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -75,19 +75,19 @@
 
 		pb18 {
 			label = "pb18";
-			gpios = <&pioB 18 1>;
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		pd21 {
 			label = "pd21";
-			gpios = <&pioD 21 0>;
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	1wire_cm {
 		compatible = "w1-gpio";
-		gpios = <&pioB 18 0>;
+		gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
 		linux,open-drain;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_1wire_cm>;
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 24781f2..95f88c7 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -27,7 +27,7 @@
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 15 0>;
+					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -40,7 +40,7 @@
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 14 0>;
+					cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -86,8 +86,8 @@
 		usb0: ohci@00600000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 1
-					   &pioD 20 1
+			atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW
+					   &pioD 20 GPIO_ACTIVE_LOW
 					  >;
 		};
 
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
index 2067c66..143b6d2 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -40,7 +40,7 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 		};
@@ -52,7 +52,7 @@
 			status = "okay";
 
 			gpios = <0
-				 &pioC 14 0
+				 &pioC 14 GPIO_ACTIVE_HIGH
 				 0
 				>;
 
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
index eae2cd7..4d82968 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -31,7 +31,7 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
index 8328fed..02df191 100644
--- a/arch/arm/boot/dts/kizbox.dts
+++ b/arch/arm/boot/dts/kizbox.dts
@@ -94,26 +94,26 @@
 
 		led1g {
 			label = "led1:green";
-			gpios = <&pioB 0 1>;
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
 		led1r {
 			label = "led1:red";
-			gpios = <&pioB 1 1>;
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
 		led2g {
 			label = "led2:green";
-			gpios = <&pioB 2 1>;
+			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		led2r {
 			label = "led2:red";
-			gpios = <&pioB 3 1>;
+			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 	};
@@ -125,14 +125,14 @@
 
 		reset {
 			label = "reset";
-			gpios = <&pioB 30 1>;
+			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
 			gpio-key,wakeup;
 		};
 
 		mode {
 			label = "mode";
-			gpios = <&pioB 31 1>;
+			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
 			linux,code = <0x101>;
 			gpio-key,wakeup;
 		};
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
index f1b54a2..ccf9ea2 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/mpa1600.dts
@@ -62,7 +62,7 @@
 
 		monitor_mute {
 			label = "Monitor mute";
-			gpios = <&pioC 1 1>;
+			gpios = <&pioC 1 GPIO_ACTIVE_LOW>;
 			linux,code = <113>;
 		};
 	};
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
index 639410b..315d927 100644
--- a/arch/arm/boot/dts/pm9g45.dts
+++ b/arch/arm/boot/dts/pm9g45.dts
@@ -64,7 +64,7 @@
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 6 0>;
+					cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -81,8 +81,8 @@
 			nand-on-flash-bbt;
 			pinctrl-0 = <&pinctrl_board_nand>;
 
-			gpios = <&pioD 3 0
-				 &pioC 14 0
+			gpios = <&pioD 3 GPIO_ACTIVE_HIGH
+				 &pioC 14 GPIO_ACTIVE_HIGH
 				 0
 				>;
 
@@ -134,13 +134,13 @@
 
 		led0 {
 			label = "led0";
-			gpios = <&pioD 0 1>;
+			gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		led1 {
 			label = "led1";
-			gpios = <&pioD 31 0>;
+			gpios = <&pioD 31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -152,13 +152,13 @@
 
 		right {
 			label = "SW4";
-			gpios = <&pioE 7 1>;
+			gpios = <&pioE 7 GPIO_ACTIVE_LOW>;
 			linux,code = <106>;
 		};
 
 		up {
 			label = "SW3";
-			gpios = <&pioE 8 1>;
+			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
 			linux,code = <103>;
 		};
 	};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 2293fa1..0d65e3d 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -9,6 +9,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel SAMA5D3 family SoC";
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts
index 5bffd66..027bac7 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/sama5d31ek.dts
@@ -41,7 +41,7 @@
 	leds {
 		d3 {
 			label = "d3";
-			gpios = <&pioE 24 0>;
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
index d88ff72..fb8ee11 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -51,7 +51,7 @@
 	leds {
 		d3 {
 			label = "d3";
-			gpios = <&pioE 24 0>;
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index 3c364d2..509a53d 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -48,7 +48,7 @@
 
 		pb_user1 {
 			label = "pb_user1";
-			gpios = <&pioE 27 0>;
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
 			gpio-key,wakeup;
 		};
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index b552917..60637e4 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -85,7 +85,7 @@
 
 		d2 {
 			label = "d2";
-			gpios = <&pioE 25 1>;	/* PE25, conflicts with A25, RXD2 */
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index a5e7131..205e64c 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -20,7 +20,7 @@
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 17 0>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -62,7 +62,7 @@
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 18 0>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -127,7 +127,7 @@
 		};
 
 		usb0: gadget@00500000 {
-			atmel,vbus-gpio = <&pioD 29 0>;
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
@@ -135,9 +135,9 @@
 
 		usb1: ohci@00600000 {
 			num-ports = <3>;
-			atmel,vbus-gpio = <&pioD 25 0
-					   &pioD 26 1
-					   &pioD 27 1
+			atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
+					   &pioD 26 GPIO_ACTIVE_LOW
+					   &pioD 27 GPIO_ACTIVE_LOW
 					  >;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
index 45f059b..0751a6a9 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -38,7 +38,7 @@
 			};
 
 			usb1: gadget@fff78000 {
-				atmel,vbus-gpio = <&pioB 11 0>;
+				atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 		};
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
index e70d229..2859776 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -30,7 +30,7 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 		};
@@ -93,7 +93,7 @@
 
 		user_led {
 			label = "user_led";
-			gpios = <&pioB 21 1>;
+			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -105,7 +105,7 @@
 
 		user_pb {
 			label = "user_pb";
-			gpios = <&pioB 10 1>;
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
 			gpio-key,wakeup;
 		};
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 82e204a..f8ec36c 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -43,7 +43,7 @@
 			};
 
 			usb1: gadget@fff78000 {
-				atmel,vbus-gpio = <&pioB 11 0>;
+				atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
@@ -107,7 +107,7 @@
 
 		user_led {
 			label = "user_led";
-			gpios = <&pioB 21 0>;
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -119,7 +119,7 @@
 
 		user_pb {
 			label = "user_pb";
-			gpios = <&pioB 10 1>;
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
 			gpio-key,wakeup;
 		};
diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
index ad3eca1..5b0ffc1 100644
--- a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
+++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
@@ -28,39 +28,39 @@
 
 		user_led1 {
 			label = "user_led1";
-			gpios = <&pioB 20 1>;
+			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
 		};
 
 /*
 * led already used by mother board but active as high
 *		user_led2 {
 *			label = "user_led2";
-*			gpios = <&pioB 21 1>;
+*			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
 *		};
 */
 		user_led3 {
 			label = "user_led3";
-			gpios = <&pioB 22 1>;
+			gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
 		};
 
 		user_led4 {
 			label = "user_led4";
-			gpios = <&pioB 23 1>;
+			gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
 		};
 
 		red {
 			label = "red";
-			gpios = <&pioB 24 1>;
+			gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
 		};
 
 		orange {
 			label = "orange";
-			gpios = <&pioB 30 1>;
+			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
 		};
 
 		green {
 			label = "green";
-			gpios = <&pioB 31 1>;
+			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -71,25 +71,25 @@
 
 		user_pb1 {
 			label = "user_pb1";
-			gpios = <&pioB 25 1>;
+			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
 		};
 
 		user_pb2 {
 			label = "user_pb2";
-			gpios = <&pioB 13 1>;
+			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
 			linux,code = <0x101>;
 		};
 
 		user_pb3 {
 			label = "user_pb3";
-			gpios = <&pioA 26 1>;
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 		};
 
 		user_pb4 {
 			label = "user_pb4";
-			gpios = <&pioC 9 1>;
+			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
 		};
 	};
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 3/5] ARM: at91: dt: add pinctrl pre-processor define
  2013-05-15 13:59 ` [PATCH 1/5] ARM: at91: dt: use #include for all device trees Jean-Christophe PLAGNIOL-VILLARD
  2013-05-15 13:59   ` [PATCH 2/5] ARM: at91: dt: switch to standard GPIO flag defines Jean-Christophe PLAGNIOL-VILLARD
@ 2013-05-15 13:59   ` Jean-Christophe PLAGNIOL-VILLARD
  2013-05-15 13:59   ` [PATCH 5/5] ARM: at91: dt: switch to standard IRQ flag defines Jean-Christophe PLAGNIOL-VILLARD
  2013-05-15 14:03   ` [PATCH 1/5] ARM: at91: dt: use #include for all device trees Jean-Christophe PLAGNIOL-VILLARD
  3 siblings, 0 replies; 5+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-05-15 13:59 UTC (permalink / raw)
  To: barebox

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 include/dt-bindings/pinctrl/at91.h |   35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 include/dt-bindings/pinctrl/at91.h

diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h
new file mode 100644
index 0000000..d7988b4
--- /dev/null
+++ b/include/dt-bindings/pinctrl/at91.h
@@ -0,0 +1,35 @@
+/*
+ * This header provides constants for most at91 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * GPLv2 only
+ */
+
+#ifndef __DT_BINDINGS_AT91_PINCTRL_H__
+#define __DT_BINDINGS_AT91_PINCTRL_H__
+
+#define AT91_PINCTRL_NONE		(0 << 0)
+#define AT91_PINCTRL_PULL_UP		(1 << 0)
+#define AT91_PINCTRL_MULTI_DRIVE	(1 << 1)
+#define AT91_PINCTRL_DEGLITCH		(1 << 2)
+#define AT91_PINCTRL_PULL_DOWN		(1 << 3)
+#define AT91_PINCTRL_DIS_SCHMIT		(1 << 4)
+#define AT91_PINCTRL_DEBOUNCE		(1 << 16)
+#define AT91_PINCTRL_DEBOUNCE_VA(x)	(x << 17)
+
+#define AT91_PINCTRL_PULL_UP_DEGLITCH	(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH)
+
+#define AT91_PIOA	0
+#define AT91_PIOB	1
+#define AT91_PIOC	2
+#define AT91_PIOD	3
+#define AT91_PIOE	4
+
+#define AT91_PERIPH_GPIO	0
+#define AT91_PERIPH_A		1
+#define AT91_PERIPH_B		2
+#define AT91_PERIPH_C		3
+#define AT91_PERIPH_D		4
+
+#endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 5/5] ARM: at91: dt: switch to standard IRQ flag defines
  2013-05-15 13:59 ` [PATCH 1/5] ARM: at91: dt: use #include for all device trees Jean-Christophe PLAGNIOL-VILLARD
  2013-05-15 13:59   ` [PATCH 2/5] ARM: at91: dt: switch to standard GPIO flag defines Jean-Christophe PLAGNIOL-VILLARD
  2013-05-15 13:59   ` [PATCH 3/5] ARM: at91: dt: add pinctrl pre-processor define Jean-Christophe PLAGNIOL-VILLARD
@ 2013-05-15 13:59   ` Jean-Christophe PLAGNIOL-VILLARD
  2013-05-15 14:03   ` [PATCH 1/5] ARM: at91: dt: use #include for all device trees Jean-Christophe PLAGNIOL-VILLARD
  3 siblings, 0 replies; 5+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-05-15 13:59 UTC (permalink / raw)
  To: barebox

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boot/dts/at91rm9200.dtsi  |   45 +++++++++++---------
 arch/arm/boot/dts/at91sam9260.dtsi |   49 ++++++++++++----------
 arch/arm/boot/dts/at91sam9263.dtsi |   43 ++++++++++----------
 arch/arm/boot/dts/at91sam9g45.dtsi |   49 +++++++++++-----------
 arch/arm/boot/dts/at91sam9n12.dtsi |   41 ++++++++++---------
 arch/arm/boot/dts/at91sam9x5.dtsi  |   55 +++++++++++++------------
 arch/arm/boot/dts/sama5d3.dtsi     |   79 ++++++++++++++++++------------------
 7 files changed, 188 insertions(+), 173 deletions(-)

diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 361a957..4aad0d9 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -12,6 +12,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -79,25 +80,29 @@
 			st: timer@fffffd00 {
 				compatible = "atmel,at91rm9200-st";
 				reg = <0xfffffd00 0x100>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
 			tcb0: timer@fffa0000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffa0000 0x100>;
-				interrupts = <17 4 0 18 4 0 19 4 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
+					      18 IRQ_TYPE_LEVEL_HIGH 0
+					      19 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			tcb1: timer@fffa4000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffa4000 0x100>;
-				interrupts = <20 4 0 21 4 0 22 4 0>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
+					      21 IRQ_TYPE_LEVEL_HIGH 0
+					      22 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			i2c0: i2c@fffb8000 {
 				compatible = "atmel,at91rm9200-i2c";
 				reg = <0xfffb8000 0x4000>;
-				interrupts = <12 4 6>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_twi>;
 				#address-cells = <1>;
@@ -108,7 +113,7 @@
 			mmc0: mmc@fffb4000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfffb4000 0x4000>;
-				interrupts = <10 4 0>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -117,7 +122,7 @@
 			ssc0: ssc@fffd0000 {
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfffd0000 0x4000>;
-				interrupts = <14 4 5>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disable";
@@ -126,7 +131,7 @@
 			ssc1: ssc@fffd4000 {
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfffd4000 0x4000>;
-				interrupts = <15 4 5>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disable";
@@ -135,7 +140,7 @@
 			ssc2: ssc@fffd8000 {
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfffd8000 0x4000>;
-				interrupts = <16 4 5>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
 				status = "disable";
@@ -144,7 +149,7 @@
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at91rm9200-emac", "cdns,emac";
 				reg = <0xfffbc000 0x4000>;
-				interrupts = <24 4 3>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
 				phy-mode = "rmii";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
@@ -396,7 +401,7 @@
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
-					interrupts = <2 4 1>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -406,7 +411,7 @@
 				pioB: gpio@fffff600 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff600 0x200>;
-					interrupts = <3 4 1>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -416,7 +421,7 @@
 				pioC: gpio@fffff800 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff800 0x200>;
-					interrupts = <4 4 1>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -426,7 +431,7 @@
 				pioD: gpio@fffffa00 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffffa00 0x200>;
-					interrupts = <5 4 1>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -437,7 +442,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffff200 0x200>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
@@ -446,7 +451,7 @@
 			usart0: serial@fffc0000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc0000 0x200>;
-				interrupts = <6 4 5>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -457,7 +462,7 @@
 			usart1: serial@fffc4000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc4000 0x200>;
-				interrupts = <7 4 5>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -468,7 +473,7 @@
 			usart2: serial@fffc8000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc8000 0x200>;
-				interrupts = <8 4 5>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -479,7 +484,7 @@
 			usart3: serial@fffcc000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffcc000 0x200>;
-				interrupts = <23 4 5>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -490,7 +495,7 @@
 			usb1: gadget@fffb0000 {
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffb0000 0x4000>;
-				interrupts = <11 4 2>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
 				status = "disabled";
 			};
 		};
@@ -515,7 +520,7 @@
 		usb0: ohci@00300000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00300000 0x100000>;
-			interrupts = <23 4 2>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 7edadf3..a776f50 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -10,6 +10,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -86,19 +87,23 @@
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
 			tcb0: timer@fffa0000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffa0000 0x100>;
-				interrupts = <17 4 0 18 4 0 19 4 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
+					      18 IRQ_TYPE_LEVEL_HIGH 0
+					      19 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			tcb1: timer@fffdc000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffdc000 0x100>;
-				interrupts = <26 4 0 27 4 0 28 4 0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
+					      27 IRQ_TYPE_LEVEL_HIGH 0
+					      28 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			pinctrl@fffff400 {
@@ -345,7 +350,7 @@
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
-					interrupts = <2 4 1>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -355,7 +360,7 @@
 				pioB: gpio@fffff600 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff600 0x200>;
-					interrupts = <3 4 1>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -365,7 +370,7 @@
 				pioC: gpio@fffff800 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff800 0x200>;
-					interrupts = <4 4 1>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -376,7 +381,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
@@ -385,7 +390,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
-				interrupts = <6 4 5>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -396,7 +401,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
-				interrupts = <7 4 5>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -407,7 +412,7 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
-				interrupts = <8 4 5>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -418,7 +423,7 @@
 			usart3: serial@fffd0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd0000 0x200>;
-				interrupts = <23 4 5>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -429,7 +434,7 @@
 			uart0: serial@fffd4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd4000 0x200>;
-				interrupts = <24 4 5>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -440,7 +445,7 @@
 			uart1: serial@fffd8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd8000 0x200>;
-				interrupts = <25 4 5>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -451,7 +456,7 @@
 			macb0: ethernet@fffc4000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffc4000 0x100>;
-				interrupts = <21 4 3>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
 				status = "disabled";
@@ -460,14 +465,14 @@
 			usb1: gadget@fffa4000 {
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffa4000 0x4000>;
-				interrupts = <10 4 2>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
 				status = "disabled";
 			};
 
 			i2c0: i2c@fffac000 {
 				compatible = "atmel,at91sam9260-i2c";
 				reg = <0xfffac000 0x100>;
-				interrupts = <11 4 6>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -476,7 +481,7 @@
 			mmc0: mmc@fffa8000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfffa8000 0x600>;
-				interrupts = <9 4 0>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -485,7 +490,7 @@
 			ssc0: ssc@fffbc000 {
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfffbc000 0x4000>;
-				interrupts = <14 4 5>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
@@ -496,7 +501,7 @@
 				#size-cells = <0>;
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xfffc8000 0x200>;
-				interrupts = <12 4 3>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
 				status = "disabled";
@@ -507,7 +512,7 @@
 				#size-cells = <0>;
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xfffcc000 0x200>;
-				interrupts = <13 4 3>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
 				status = "disabled";
@@ -516,7 +521,7 @@
 			adc0: adc@fffe0000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffe0000 0x100>;
-				interrupts = <5 4 0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
 				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xf>;
 				atmel,adc-vref = <3300>;
@@ -579,7 +584,7 @@
 		usb0: ohci@00500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
-			interrupts = <20 4 2>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index bb4d7ca..d9cf51a 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -8,6 +8,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -74,13 +75,13 @@
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
 			tcb0: timer@fff7c000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfff7c000 0x100>;
-				interrupts = <19 4 0>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			rstc@fffffd00 {
@@ -326,7 +327,7 @@
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
-					interrupts = <2 4 1>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -336,7 +337,7 @@
 				pioB: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
-					interrupts = <3 4 1>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -346,7 +347,7 @@
 				pioC: gpio@fffff600 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff600 0x200>;
-					interrupts = <4 4 1>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -356,7 +357,7 @@
 				pioD: gpio@fffff800 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff800 0x200>;
-					interrupts = <4 4 1>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -366,7 +367,7 @@
 				pioE: gpio@fffffa00 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffffa00 0x200>;
-					interrupts = <4 4 1>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -377,7 +378,7 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
@@ -386,7 +387,7 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
-				interrupts = <7 4 5>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -397,7 +398,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
-				interrupts = <8 4 5>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -408,7 +409,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
-				interrupts = <9 4 5>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -419,7 +420,7 @@
 			ssc0: ssc@fff98000 {
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff98000 0x4000>;
-				interrupts = <16 4 5>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
@@ -428,7 +429,7 @@
 			ssc1: ssc@fff9c000 {
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff9c000 0x4000>;
-				interrupts = <17 4 5>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disabled";
@@ -437,7 +438,7 @@
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;
-				interrupts = <21 4 3>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
 				status = "disabled";
@@ -446,14 +447,14 @@
 			usb1: gadget@fff78000 {
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfff78000 0x4000>;
-				interrupts = <24 4 2>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
 				status = "disabled";
 			};
 
 			i2c0: i2c@fff88000 {
 				compatible = "atmel,at91sam9263-i2c";
 				reg = <0xfff88000 0x100>;
-				interrupts = <13 4 6>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -462,7 +463,7 @@
 			mmc0: mmc@fff80000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
-				interrupts = <10 4 0>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -471,7 +472,7 @@
 			mmc1: mmc@fff84000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfff84000 0x600>;
-				interrupts = <11 4 0>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -488,7 +489,7 @@
 				#size-cells = <0>;
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xfffa4000 0x200>;
-				interrupts = <14 4 3>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
 				status = "disabled";
@@ -499,7 +500,7 @@
 				#size-cells = <0>;
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xfffa8000 0x200>;
-				interrupts = <15 4 3>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
 				status = "disabled";
@@ -527,7 +528,7 @@
 		usb0: ohci@00a00000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00a00000 0x100000>;
-			interrupts = <29 4 2>;
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 8ba4c71..f0091af 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -11,6 +11,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -85,7 +86,7 @@
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
 
@@ -97,19 +98,19 @@
 			tcb0: timer@fff7c000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfff7c000 0x100>;
-				interrupts = <18 4 0>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			tcb1: timer@fffd4000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffd4000 0x100>;
-				interrupts = <18 4 0>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			dma: dma-controller@ffffec00 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
-				interrupts = <21 4 0>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
 			};
 
@@ -346,7 +347,7 @@
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
-					interrupts = <2 4 1>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -356,7 +357,7 @@
 				pioB: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
-					interrupts = <3 4 1>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -366,7 +367,7 @@
 				pioC: gpio@fffff600 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff600 0x200>;
-					interrupts = <4 4 1>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -376,7 +377,7 @@
 				pioD: gpio@fffff800 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff800 0x200>;
-					interrupts = <5 4 1>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -386,7 +387,7 @@
 				pioE: gpio@fffffa00 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffffa00 0x200>;
-					interrupts = <5 4 1>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -397,7 +398,7 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
@@ -406,7 +407,7 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
-				interrupts = <7 4 5>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -417,7 +418,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
-				interrupts = <8 4 5>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -428,7 +429,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
-				interrupts = <9 4 5>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -439,7 +440,7 @@
 			usart3: serial@fff98000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff98000 0x200>;
-				interrupts = <10 4 5>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -450,7 +451,7 @@
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;
-				interrupts = <25 4 3>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
 				status = "disabled";
@@ -459,7 +460,7 @@
 			i2c0: i2c@fff84000 {
 				compatible = "atmel,at91sam9g10-i2c";
 				reg = <0xfff84000 0x100>;
-				interrupts = <12 4 6>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -468,7 +469,7 @@
 			i2c1: i2c@fff88000 {
 				compatible = "atmel,at91sam9g10-i2c";
 				reg = <0xfff88000 0x100>;
-				interrupts = <13 4 6>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -477,7 +478,7 @@
 			ssc0: ssc@fff9c000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfff9c000 0x4000>;
-				interrupts = <16 4 5>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
@@ -486,7 +487,7 @@
 			ssc1: ssc@fffa0000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfffa0000 0x4000>;
-				interrupts = <17 4 5>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disabled";
@@ -495,7 +496,7 @@
 			adc0: adc@fffb0000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffb0000 0x100>;
-				interrupts = <20 4 0>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xff>;
 				atmel,adc-vref = <3300>;
@@ -535,7 +536,7 @@
 			mmc0: mmc@fff80000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
-				interrupts = <11 4 0>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma 1 0>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -546,7 +547,7 @@
 			mmc1: mmc@fffd0000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfffd0000 0x600>;
-				interrupts = <29 4 0>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma 1 13>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -604,14 +605,14 @@
 		usb0: ohci@00700000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00700000 0x100000>;
-			interrupts = <22 4 2>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 
 		usb1: ehci@00800000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
-			interrupts = <22 4 2>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index e166e0c..566af32 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -9,6 +9,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -79,7 +80,7 @@
 			pit: timer@fffffe30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
 			shdwc@fffffe10 {
@@ -90,7 +91,7 @@
 			mmc0: mmc@f0008000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
-				interrupts = <12 4 0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma 1 0>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -101,19 +102,19 @@
 			tcb0: timer@f8008000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
-				interrupts = <17 4 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			tcb1: timer@f800c000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf800c000 0x100>;
-				interrupts = <17 4 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			dma: dma-controller@ffffec00 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
-				interrupts = <20 4 0>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
 			};
 
@@ -287,7 +288,7 @@
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
-					interrupts = <2 4 1>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -297,7 +298,7 @@
 				pioB: gpio@fffff600 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff600 0x200>;
-					interrupts = <2 4 1>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -307,7 +308,7 @@
 				pioC: gpio@fffff800 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff800 0x200>;
-					interrupts = <3 4 1>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -317,7 +318,7 @@
 				pioD: gpio@fffffa00 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffffa00 0x200>;
-					interrupts = <3 4 1>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -328,7 +329,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
@@ -337,7 +338,7 @@
 			ssc0: ssc@f0010000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0010000 0x4000>;
-				interrupts = <28 4 5>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
@@ -346,7 +347,7 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;
-				interrupts = <5 4 5>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
@@ -355,7 +356,7 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x4000>;
-				interrupts = <6 4 5>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
@@ -364,7 +365,7 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x4000>;
-				interrupts = <7 4 5>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
@@ -373,7 +374,7 @@
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x4000>;
-				interrupts = <8 4 5>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
 				status = "disabled";
@@ -382,7 +383,7 @@
 			i2c0: i2c@f8010000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8010000 0x100>;
-				interrupts = <9 4 6>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma 1 13>,
 				       <&dma 1 14>;
 				dma-names = "tx", "rx";
@@ -394,7 +395,7 @@
 			i2c1: i2c@f8014000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8014000 0x100>;
-				interrupts = <10 4 6>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma 1 15>,
 				       <&dma 1 16>;
 				dma-names = "tx", "rx";
@@ -408,7 +409,7 @@
 				#size-cells = <0>;
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xf0000000 0x100>;
-				interrupts = <13 4 3>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
 				status = "disabled";
@@ -419,7 +420,7 @@
 				#size-cells = <0>;
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xf0004000 0x100>;
-				interrupts = <14 4 3>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
 				status = "disabled";
@@ -450,7 +451,7 @@
 		usb0: ohci@00500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x00100000>;
-			interrupts = <22 4 2>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index cfbf923..af91599 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -11,6 +11,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -87,32 +88,32 @@
 			pit: timer@fffffe30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
 			tcb0: timer@f8008000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
-				interrupts = <17 4 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			tcb1: timer@f800c000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf800c000 0x100>;
-				interrupts = <17 4 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			dma0: dma-controller@ffffec00 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
-				interrupts = <20 4 0>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
 			};
 
 			dma1: dma-controller@ffffee00 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffee00 0x200>;
-				interrupts = <21 4 0>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
 			};
 
@@ -416,7 +417,7 @@
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
-					interrupts = <2 4 1>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -426,7 +427,7 @@
 				pioB: gpio@fffff600 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff600 0x200>;
-					interrupts = <2 4 1>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					#gpio-lines = <19>;
@@ -437,7 +438,7 @@
 				pioC: gpio@fffff800 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff800 0x200>;
-					interrupts = <3 4 1>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -447,7 +448,7 @@
 				pioD: gpio@fffffa00 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffffa00 0x200>;
-					interrupts = <3 4 1>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					#gpio-lines = <22>;
@@ -459,7 +460,7 @@
 			ssc0: ssc@f0010000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0010000 0x4000>;
-				interrupts = <28 4 5>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
@@ -468,7 +469,7 @@
 			mmc0: mmc@f0008000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
-				interrupts = <12 4 0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma0 1 0>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -479,7 +480,7 @@
 			mmc1: mmc@f000c000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf000c000 0x600>;
-				interrupts = <26 4 0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 1 0>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -490,7 +491,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
@@ -499,7 +500,7 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x200>;
-				interrupts = <5 4 5>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
@@ -508,7 +509,7 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x200>;
-				interrupts = <6 4 5>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
@@ -517,7 +518,7 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x200>;
-				interrupts = <7 4 5>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
@@ -526,7 +527,7 @@
 			macb0: ethernet@f802c000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
-				interrupts = <24 4 3>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_rmii>;
 				status = "disabled";
@@ -535,14 +536,14 @@
 			macb1: ethernet@f8030000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf8030000 0x100>;
-				interrupts = <27 4 3>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
 				status = "disabled";
 			};
 
 			i2c0: i2c@f8010000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8010000 0x100>;
-				interrupts = <9 4 6>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma0 1 7>,
 				       <&dma0 1 8>;
 				dma-names = "tx", "rx";
@@ -556,7 +557,7 @@
 			i2c1: i2c@f8014000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8014000 0x100>;
-				interrupts = <10 4 6>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma1 1 5>,
 				       <&dma1 1 6>;
 				dma-names = "tx", "rx";
@@ -570,7 +571,7 @@
 			i2c2: i2c@f8018000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8018000 0x100>;
-				interrupts = <11 4 6>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma0 1 9>,
 				       <&dma0 1 10>;
 				dma-names = "tx", "rx";
@@ -584,7 +585,7 @@
 			adc0: adc@f804c000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xf804c000 0x100>;
-				interrupts = <19 4 0>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
 				atmel,adc-use-external;
 				atmel,adc-channels-used = <0xffff>;
 				atmel,adc-vref = <3300>;
@@ -627,7 +628,7 @@
 				#size-cells = <0>;
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xf0000000 0x100>;
-				interrupts = <13 4 3>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
 				status = "disabled";
@@ -638,7 +639,7 @@
 				#size-cells = <0>;
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xf0004000 0x100>;
-				interrupts = <14 4 3>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
 				status = "disabled";
@@ -647,7 +648,7 @@
 			rtc@fffffeb0 {
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffeb0 0x40>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				status = "disabled";
 			};
 		};
@@ -676,14 +677,14 @@
 		usb0: ohci@00600000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
-			interrupts = <22 4 2>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 
 		usb1: ehci@00700000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
-			interrupts = <22 4 2>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 05a3380..c00e158 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -10,6 +10,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -61,7 +62,7 @@
 			mmc0: mmc@f0000000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf0000000 0x600>;
-				interrupts = <21 4 0>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma0 2 0>;
 				dma-names = "rxtx";
 				pinctrl-names = "default";
@@ -76,7 +77,7 @@
 				#size-cells = <0>;
 				compatible = "atmel,at91sam9x5-spi";
 				reg = <0xf0004000 0x100>;
-				interrupts = <24 4 3>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
 				cs-gpios = <&pioD 13 0
 					    &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
 					    &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
@@ -90,7 +91,7 @@
 			ssc0: ssc@f0008000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0008000 0x4000>;
-				interrupts = <38 4 4>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
@@ -99,7 +100,7 @@
 			can0: can@f000c000 {
 				compatible = "atmel,at91sam9x5-can";
 				reg = <0xf000c000 0x300>;
-				interrupts = <40 4 3>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can0_rx_tx>;
 				status = "disabled";
@@ -108,13 +109,13 @@
 			tcb0: timer@f0010000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf0010000 0x100>;
-				interrupts = <26 4 0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			i2c0: i2c@f0014000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf0014000 0x4000>;
-				interrupts = <18 4 6>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma0 2 7>,
 				       <&dma0 2 8>;
 				dma-names = "tx", "rx";
@@ -128,7 +129,7 @@
 			i2c1: i2c@f0018000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf0018000 0x4000>;
-				interrupts = <19 4 6>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma0 2 9>,
 				       <&dma0 2 10>;
 				dma-names = "tx", "rx";
@@ -142,7 +143,7 @@
 			usart0: serial@f001c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf001c000 0x100>;
-				interrupts = <12 4 5>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
@@ -151,7 +152,7 @@
 			usart1: serial@f0020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0020000 0x100>;
-				interrupts = <13 4 5>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
@@ -160,7 +161,7 @@
 			macb0: ethernet@f0028000 {
 				compatible = "cnds,pc302-gem", "cdns,gem";
 				reg = <0xf0028000 0x100>;
-				interrupts = <34 4 3>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
 				status = "disabled";
@@ -169,14 +170,14 @@
 			isi: isi@f0034000 {
 				compatible = "atmel,at91sam9g45-isi";
 				reg = <0xf0034000 0x4000>;
-				interrupts = <37 4 5>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
 				status = "disabled";
 			};
 
 			mmc1: mmc@f8000000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf8000000 0x600>;
-				interrupts = <22 4 0>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 2 0>;
 				dma-names = "rxtx";
 				pinctrl-names = "default";
@@ -189,7 +190,7 @@
 			mmc2: mmc@f8004000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf8004000 0x600>;
-				interrupts = <23 4 0>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 2 1>;
 				dma-names = "rxtx";
 				pinctrl-names = "default";
@@ -204,7 +205,7 @@
 				#size-cells = <0>;
 				compatible = "atmel,at91sam9x5-spi";
 				reg = <0xf8008000 0x100>;
-				interrupts = <25 4 3>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
 				cs-gpios = <&pioC 25 0
 					    &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
 					    &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
@@ -218,7 +219,7 @@
 			ssc1: ssc@f800c000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf800c000 0x4000>;
-				interrupts = <39 4 4>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disabled";
@@ -227,7 +228,7 @@
 			can1: can@f8010000 {
 				compatible = "atmel,at91sam9x5-can";
 				reg = <0xf8010000 0x300>;
-				interrupts = <41 4 3>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can1_rx_tx>;
 			};
@@ -235,13 +236,13 @@
 			tcb1: timer@f8014000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8014000 0x100>;
-				interrupts = <27 4 0>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			adc0: adc@f8018000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xf8018000 0x100>;
-				interrupts = <29 4 5>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <
 					&pinctrl_adc0_adtrg
@@ -295,7 +296,7 @@
 			tsadcc: tsadcc@f8018000 {
 				compatible = "atmel,at91sam9x5-tsadcc";
 				reg = <0xf8018000 0x4000>;
-				interrupts = <29 4 5>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,tsadcc_clock = <300000>;
 				atmel,filtering_average = <0x03>;
 				atmel,pendet_debounce = <0x08>;
@@ -307,7 +308,7 @@
 			i2c2: i2c@f801c000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf801c000 0x4000>;
-				interrupts = <20 4 6>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma1 2 11>,
 				       <&dma1 2 12>;
 				dma-names = "tx", "rx";
@@ -319,7 +320,7 @@
 			usart2: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x100>;
-				interrupts = <14 4 5>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
@@ -328,7 +329,7 @@
 			usart3: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x100>;
-				interrupts = <15 4 5>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
 				status = "disabled";
@@ -337,7 +338,7 @@
 			macb1: ethernet@f802c000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
-				interrupts = <35 4 3>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb1_rmii>;
 				status = "disabled";
@@ -346,7 +347,7 @@
 			sha@f8034000 {
 				compatible = "atmel,sam9g46-sha";
 				reg = <0xf8034000 0x100>;
-				interrupts = <42 4 0>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			aes@f8038000 {
@@ -358,20 +359,20 @@
 			tdes@f803c000 {
 				compatible = "atmel,sam9g46-tdes";
 				reg = <0xf803c000 0x100>;
-				interrupts = <44 4 0>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			dma0: dma-controller@ffffe600 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe600 0x200>;
-				interrupts = <30 4 0>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
 			};
 
 			dma1: dma-controller@ffffe800 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe800 0x200>;
-				interrupts = <31 4 0>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
 			};
 
@@ -383,7 +384,7 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
-				interrupts = <2 4 7>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
@@ -817,7 +818,7 @@
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x100>;
-					interrupts = <6 4 1>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -827,7 +828,7 @@
 				pioB: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x100>;
-					interrupts = <7 4 1>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -837,7 +838,7 @@
 				pioC: gpio@fffff600 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff600 0x100>;
-					interrupts = <8 4 1>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -847,7 +848,7 @@
 				pioD: gpio@fffff800 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff800 0x100>;
-					interrupts = <9 4 1>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -857,7 +858,7 @@
 				pioE: gpio@fffffa00 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffffa00 0x100>;
-					interrupts = <10 4 1>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -878,7 +879,7 @@
 			pit: timer@fffffe30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
-				interrupts = <3 4 5>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
 			};
 
 			watchdog@fffffe40 {
@@ -890,7 +891,7 @@
 			rtc@fffffeb0 {
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffeb0 0x30>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 		};
 
@@ -900,7 +901,7 @@
 			compatible = "atmel,at91sam9rl-udc";
 			reg = <0x00500000 0x100000
 			       0xf8030000 0x4000>;
-			interrupts = <33 4 2>;
+			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 
 			ep0 {
@@ -1012,14 +1013,14 @@
 		usb1: ohci@00600000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
-			interrupts = <32 4 2>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 
 		usb2: ehci@00700000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
-			interrupts = <32 4 2>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 
@@ -1035,7 +1036,7 @@
 				0xffffc000 0x00000070	/* NFC HSMC regs */
 				0x00200000 0x00100000	/* NFC SRAM banks */
 				>;
-			interrupts = <5 4 6>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 1/5] ARM: at91: dt: use #include for all device trees
  2013-05-15 13:59 ` [PATCH 1/5] ARM: at91: dt: use #include for all device trees Jean-Christophe PLAGNIOL-VILLARD
                     ` (2 preceding siblings ...)
  2013-05-15 13:59   ` [PATCH 5/5] ARM: at91: dt: switch to standard IRQ flag defines Jean-Christophe PLAGNIOL-VILLARD
@ 2013-05-15 14:03   ` Jean-Christophe PLAGNIOL-VILLARD
  3 siblings, 0 replies; 5+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-05-15 14:03 UTC (permalink / raw)
  To: barebox

On 15:59 Wed 15 May     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> to prepare the switch to the macro.

sorry wrong ML
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2013-05-15 14:08 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20130515135821.GG22508@game.jcrosoft.org>
2013-05-15 13:59 ` [PATCH 1/5] ARM: at91: dt: use #include for all device trees Jean-Christophe PLAGNIOL-VILLARD
2013-05-15 13:59   ` [PATCH 2/5] ARM: at91: dt: switch to standard GPIO flag defines Jean-Christophe PLAGNIOL-VILLARD
2013-05-15 13:59   ` [PATCH 3/5] ARM: at91: dt: add pinctrl pre-processor define Jean-Christophe PLAGNIOL-VILLARD
2013-05-15 13:59   ` [PATCH 5/5] ARM: at91: dt: switch to standard IRQ flag defines Jean-Christophe PLAGNIOL-VILLARD
2013-05-15 14:03   ` [PATCH 1/5] ARM: at91: dt: use #include for all device trees Jean-Christophe PLAGNIOL-VILLARD

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox