From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from exprod5og118.obsmtp.com ([64.18.0.160]) by merlin.infradead.org with smtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UiSc3-0006sb-Jn for barebox@lists.infradead.org; Fri, 31 May 2013 16:55:37 +0000 From: Renaud Barbier Date: Fri, 31 May 2013 17:54:03 +0100 Message-Id: <1370019244-7873-8-git-send-email-renaud.barbier@ge.com> In-Reply-To: <1370019244-7873-1-git-send-email-renaud.barbier@ge.com> References: <1370019244-7873-1-git-send-email-renaud.barbier@ge.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 7/8] ppc 8xxx: core DDR driver functions To: barebox@lists.infradead.org This file is imported from U-Boot as is. This code provides the 8xxx memory controller core driver interface. Signed-off-by: Renaud Barbier --- arch/ppc/ddr-8xxx/main.c | 667 ++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 667 insertions(+), 0 deletions(-) create mode 100644 arch/ppc/ddr-8xxx/main.c diff --git a/arch/ppc/ddr-8xxx/main.c b/arch/ppc/ddr-8xxx/main.c new file mode 100644 index 0000000..7a8636d --- /dev/null +++ b/arch/ppc/ddr-8xxx/main.c @@ -0,0 +1,667 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +/* + * Generic driver for Freescale DDR/DDR2/DDR3 memory controller. + * Based on code from spd_sdram.c + * Author: James Yang [at freescale.com] + */ + +#include +#include +#include +#include + +#include "ddr.h" + +void fsl_ddr_set_lawbar( + const common_timing_params_t *memctl_common_params, + unsigned int memctl_interleaved, + unsigned int ctrl_num); +void fsl_ddr_set_intl3r(const unsigned int granule_size); + +/* processor specific function */ +extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, + unsigned int ctrl_num); + +#if defined(SPD_EEPROM_ADDRESS) || \ + defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \ + defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4) +#if (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS, +}; +#elif (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ + [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */ +}; +#elif (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ + [1][0] = SPD_EEPROM_ADDRESS2, /* controller 2 */ +}; +#elif (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ + [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */ + [1][0] = SPD_EEPROM_ADDRESS3, /* controller 2 */ + [1][1] = SPD_EEPROM_ADDRESS4, /* controller 2 */ +}; +#elif (CONFIG_NUM_DDR_CONTROLLERS == 3) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ + [1][0] = SPD_EEPROM_ADDRESS2, /* controller 2 */ + [2][0] = SPD_EEPROM_ADDRESS3, /* controller 3 */ +}; +#elif (CONFIG_NUM_DDR_CONTROLLERS == 3) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ + [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */ + [1][0] = SPD_EEPROM_ADDRESS3, /* controller 2 */ + [1][1] = SPD_EEPROM_ADDRESS4, /* controller 2 */ + [2][0] = SPD_EEPROM_ADDRESS5, /* controller 3 */ + [2][1] = SPD_EEPROM_ADDRESS6, /* controller 3 */ +}; + +#endif + +static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) +{ + int ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, + sizeof(generic_spd_eeprom_t)); + + if (ret) { + if (i2c_address == +#ifdef SPD_EEPROM_ADDRESS + SPD_EEPROM_ADDRESS +#elif defined(SPD_EEPROM_ADDRESS1) + SPD_EEPROM_ADDRESS1 +#endif + ) { + printf("DDR: failed to read SPD from address %u\n", + i2c_address); + } else { + debug("DDR: failed to read SPD from address %u\n", + i2c_address); + } + memset(spd, 0, sizeof(generic_spd_eeprom_t)); + } +} + +__attribute__((weak, alias("__get_spd"))) +void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address); + +void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ + unsigned int i; + unsigned int i2c_address = 0; + + if (ctrl_num >= CONFIG_NUM_DDR_CONTROLLERS) { + printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); + return; + } + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + i2c_address = spd_i2c_addr[ctrl_num][i]; + get_spd(&(ctrl_dimms_spd[i]), i2c_address); + } +} +#else +void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ +} +#endif /* SPD_EEPROM_ADDRESSx */ + +/* + * ASSUMPTIONS: + * - Same number of CONFIG_DIMM_SLOTS_PER_CTLR on each controller + * - Same memory data bus width on all controllers + * + * NOTES: + * + * The memory controller and associated documentation use confusing + * terminology when referring to the orgranization of DRAM. + * + * Here is a terminology translation table: + * + * memory controller/documention |industry |this code |signals + * -------------------------------|-----------|-----------|----------------- + * physical bank/bank |rank |rank |chip select (CS) + * logical bank/sub-bank |bank |bank |bank address (BA) + * page/row |row |page |row address + * ??? |column |column |column address + * + * The naming confusion is further exacerbated by the descriptions of the + * memory controller interleaving feature, where accesses are interleaved + * _BETWEEN_ two seperate memory controllers. This is configured only in + * CS0_CONFIG[INTLV_CTL] of each memory controller. + * + * memory controller documentation | number of chip selects + * | per memory controller supported + * --------------------------------|----------------------------------------- + * cache line interleaving | 1 (CS0 only) + * page interleaving | 1 (CS0 only) + * bank interleaving | 1 (CS0 only) + * superbank interleraving | depends on bank (chip select) + * | interleraving [rank interleaving] + * | mode used on every memory controller + * + * Even further confusing is the existence of the interleaving feature + * _WITHIN_ each memory controller. The feature is referred to in + * documentation as chip select interleaving or bank interleaving, + * although it is configured in the DDR_SDRAM_CFG field. + * + * Name of field | documentation name | this code + * -----------------------------|-----------------------|------------------ + * DDR_SDRAM_CFG[BA_INTLV_CTL] | Bank (chip select) | rank interleaving + * | interleaving + */ + +const char *step_string_tbl[] = { + "STEP_GET_SPD", + "STEP_COMPUTE_DIMM_PARMS", + "STEP_COMPUTE_COMMON_PARMS", + "STEP_GATHER_OPTS", + "STEP_ASSIGN_ADDRESSES", + "STEP_COMPUTE_REGS", + "STEP_PROGRAM_REGS", + "STEP_ALL" +}; + +const char * step_to_string(unsigned int step) { + + unsigned int s = __ilog2(step); + + if ((1 << s) != step) + return step_string_tbl[7]; + + return step_string_tbl[s]; +} + +static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo, + unsigned int dbw_cap_adj[]) +{ + int i, j; + unsigned long long total_mem, current_mem_base, total_ctlr_mem; + unsigned long long rank_density, ctlr_density = 0; + + /* + * If a reduced data width is requested, but the SPD + * specifies a physically wider device, adjust the + * computed dimm capacities accordingly before + * assigning addresses. + */ + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + unsigned int found = 0; + + switch (pinfo->memctl_opts[i].data_bus_width) { + case 2: + /* 16-bit */ + for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { + unsigned int dw; + if (!pinfo->dimm_params[i][j].n_ranks) + continue; + dw = pinfo->dimm_params[i][j].primary_sdram_width; + if ((dw == 72 || dw == 64)) { + dbw_cap_adj[i] = 2; + break; + } else if ((dw == 40 || dw == 32)) { + dbw_cap_adj[i] = 1; + break; + } + } + break; + + case 1: + /* 32-bit */ + for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { + unsigned int dw; + dw = pinfo->dimm_params[i][j].data_width; + if (pinfo->dimm_params[i][j].n_ranks + && (dw == 72 || dw == 64)) { + /* + * FIXME: can't really do it + * like this because this just + * further reduces the memory + */ + found = 1; + break; + } + } + if (found) { + dbw_cap_adj[i] = 1; + } + break; + + case 0: + /* 64-bit */ + break; + + default: + printf("unexpected data bus width " + "specified controller %u\n", i); + return 1; + } + debug("dbw_cap_adj[%d]=%d\n", i, dbw_cap_adj[i]); + } + + current_mem_base = 0ull; + total_mem = 0; + if (pinfo->memctl_opts[0].memctl_interleaving) { + rank_density = pinfo->dimm_params[0][0].rank_density >> + dbw_cap_adj[0]; + switch (pinfo->memctl_opts[0].ba_intlv_ctl & + FSL_DDR_CS0_CS1_CS2_CS3) { + case FSL_DDR_CS0_CS1_CS2_CS3: + ctlr_density = 4 * rank_density; + break; + case FSL_DDR_CS0_CS1: + case FSL_DDR_CS0_CS1_AND_CS2_CS3: + ctlr_density = 2 * rank_density; + break; + case FSL_DDR_CS2_CS3: + default: + ctlr_density = rank_density; + break; + } + debug("rank density is 0x%llx, ctlr density is 0x%llx\n", + rank_density, ctlr_density); + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + if (pinfo->memctl_opts[i].memctl_interleaving) { + switch (pinfo->memctl_opts[i].memctl_interleaving_mode) { + case FSL_DDR_CACHE_LINE_INTERLEAVING: + case FSL_DDR_PAGE_INTERLEAVING: + case FSL_DDR_BANK_INTERLEAVING: + case FSL_DDR_SUPERBANK_INTERLEAVING: + total_ctlr_mem = 2 * ctlr_density; + break; + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + total_ctlr_mem = 3 * ctlr_density; + break; + case FSL_DDR_4WAY_1KB_INTERLEAVING: + case FSL_DDR_4WAY_4KB_INTERLEAVING: + case FSL_DDR_4WAY_8KB_INTERLEAVING: + total_ctlr_mem = 4 * ctlr_density; + break; + default: + panic("Unknown interleaving mode"); + } + pinfo->common_timing_params[i].base_address = + current_mem_base; + pinfo->common_timing_params[i].total_mem = + total_ctlr_mem; + total_mem = current_mem_base + total_ctlr_mem; + debug("ctrl %d base 0x%llx\n", i, current_mem_base); + debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem); + } else { + /* when 3rd controller not interleaved */ + current_mem_base = total_mem; + total_ctlr_mem = 0; + pinfo->common_timing_params[i].base_address = + current_mem_base; + for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { + unsigned long long cap = + pinfo->dimm_params[i][j].capacity >> dbw_cap_adj[i]; + pinfo->dimm_params[i][j].base_address = + current_mem_base; + debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base); + current_mem_base += cap; + total_ctlr_mem += cap; + } + debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem); + pinfo->common_timing_params[i].total_mem = + total_ctlr_mem; + total_mem += total_ctlr_mem; + } + } + } else { + /* + * Simple linear assignment if memory + * controllers are not interleaved. + */ + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + total_ctlr_mem = 0; + pinfo->common_timing_params[i].base_address = + current_mem_base; + for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { + /* Compute DIMM base addresses. */ + unsigned long long cap = + pinfo->dimm_params[i][j].capacity >> dbw_cap_adj[i]; + pinfo->dimm_params[i][j].base_address = + current_mem_base; + debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base); + current_mem_base += cap; + total_ctlr_mem += cap; + } + debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem); + pinfo->common_timing_params[i].total_mem = + total_ctlr_mem; + total_mem += total_ctlr_mem; + } + } + debug("Total mem by %s is 0x%llx\n", __func__, total_mem); + + return total_mem; +} + +/* Use weak function to allow board file to override the address assignment */ +__attribute__((weak, alias("__step_assign_addresses"))) +unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo, + unsigned int dbw_cap_adj[]); + +unsigned long long +fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, + unsigned int size_only) +{ + unsigned int i, j; + unsigned long long total_mem = 0; + + fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg; + common_timing_params_t *timing_params = pinfo->common_timing_params; + + /* data bus width capacity adjust shift amount */ + unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS]; + + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + dbw_capacity_adjust[i] = 0; + } + + debug("starting at step %u (%s)\n", + start_step, step_to_string(start_step)); + + switch (start_step) { + case STEP_GET_SPD: +#if defined(CONFIG_DDR_SPD) || defined(CONFIG_SPD_EEPROM) + /* STEP 1: Gather all DIMM SPD data */ + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i); + } + + case STEP_COMPUTE_DIMM_PARMS: + /* STEP 2: Compute DIMM parameters from SPD data */ + + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { + unsigned int retval; + generic_spd_eeprom_t *spd = + &(pinfo->spd_installed_dimms[i][j]); + dimm_params_t *pdimm = + &(pinfo->dimm_params[i][j]); + + retval = compute_dimm_parameters(spd, pdimm, i); +#ifdef CONFIG_SYS_DDR_RAW_TIMING + if (!i && !j && retval) { + printf("SPD error on controller %d! " + "Trying fallback to raw timing " + "calculation\n", i); + fsl_ddr_get_dimm_params(pdimm, i, j); + } +#else + if (retval == 2) { + printf("Error: compute_dimm_parameters" + " non-zero returned FATAL value " + "for memctl=%u dimm=%u\n", i, j); + return 0; + } +#endif + if (retval) { + debug("Warning: compute_dimm_parameters" + " non-zero return value for memctl=%u " + "dimm=%u\n", i, j); + } + } + } + +#elif defined(CONFIG_SYS_DDR_RAW_TIMING) + case STEP_COMPUTE_DIMM_PARMS: + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { + dimm_params_t *pdimm = + &(pinfo->dimm_params[i][j]); + fsl_ddr_get_dimm_params(pdimm, i, j); + } + } + debug("Filling dimm parameters from board specific file\n"); +#endif + case STEP_COMPUTE_COMMON_PARMS: + /* + * STEP 3: Compute a common set of timing parameters + * suitable for all of the DIMMs on each memory controller + */ + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + debug("Computing lowest common DIMM" + " parameters for memctl=%u\n", i); + compute_lowest_common_dimm_parameters( + pinfo->dimm_params[i], + &timing_params[i], + CONFIG_DIMM_SLOTS_PER_CTLR); + } + + case STEP_GATHER_OPTS: + /* STEP 4: Gather configuration requirements from user */ + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + debug("Reloading memory controller " + "configuration options for memctl=%u\n", i); + /* + * This "reloads" the memory controller options + * to defaults. If the user "edits" an option, + * next_step points to the step after this, + * which is currently STEP_ASSIGN_ADDRESSES. + */ + populate_memctl_options( + timing_params[i].all_DIMMs_registered, + &pinfo->memctl_opts[i], + pinfo->dimm_params[i], i); + } + case STEP_ASSIGN_ADDRESSES: + /* STEP 5: Assign addresses to chip selects */ + check_interleaving_options(pinfo); + total_mem = step_assign_addresses(pinfo, dbw_capacity_adjust); + + case STEP_COMPUTE_REGS: + /* STEP 6: compute controller register values */ + debug("FSL Memory ctrl register computation\n"); + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + if (timing_params[i].ndimms_present == 0) { + memset(&ddr_reg[i], 0, + sizeof(fsl_ddr_cfg_regs_t)); + continue; + } + + compute_fsl_memctl_config_regs( + &pinfo->memctl_opts[i], + &ddr_reg[i], &timing_params[i], + pinfo->dimm_params[i], + dbw_capacity_adjust[i], + size_only); + } + + default: + break; + } + + { + /* + * Compute the amount of memory available just by + * looking for the highest valid CSn_BNDS value. + * This allows us to also experiment with using + * only CS0 when using dual-rank DIMMs. + */ + unsigned int max_end = 0; + + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (j = 0; j < CONFIG_CHIP_SELECTS_PER_CTRL; j++) { + fsl_ddr_cfg_regs_t *reg = &ddr_reg[i]; + if (reg->cs[j].config & 0x80000000) { + unsigned int end; + end = reg->cs[j].bnds & 0xFFF; + if (end > max_end) { + max_end = end; + } + } + } + } + + total_mem = 1 + (((unsigned long long)max_end << 24ULL) + | 0xFFFFFFULL); + } + + return total_mem; +} + +/* + * fsl_ddr_sdram() -- this is the main function to be called by + * initdram() in the board file. + * + * It returns amount of memory configured in bytes. + */ +phys_size_t fsl_ddr_sdram(void) +{ + unsigned int i; + unsigned int law_memctl = LAW_TRGT_IF_DDR_1; + unsigned long long total_memory; + fsl_ddr_info_t info; + + /* Reset info structure. */ + memset(&info, 0, sizeof(fsl_ddr_info_t)); + + /* Compute it once normally. */ +#ifdef CONFIG_FSL_DDR_INTERACTIVE + if (tstc() && (getc() == 'd')) { /* we got a key press of 'd' */ + total_memory = fsl_ddr_interactive(&info, 0); + } else if (fsl_ddr_interactive_env_var_exists()) { + total_memory = fsl_ddr_interactive(&info, 1); + } else +#endif + total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0); + + /* setup 3-way interleaving before enabling DDRC */ + if (info.memctl_opts[0].memctl_interleaving) { + switch (info.memctl_opts[0].memctl_interleaving_mode) { + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + fsl_ddr_set_intl3r( + info.memctl_opts[0].memctl_interleaving_mode); + break; + default: + break; + } + } + + /* Program configuration registers. */ + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + debug("Programming controller %u\n", i); + if (info.common_timing_params[i].ndimms_present == 0) { + debug("No dimms present on controller %u; " + "skipping programming\n", i); + continue; + } + + fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i); + } + + /* program LAWs */ + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + if (info.memctl_opts[i].memctl_interleaving) { + switch (info.memctl_opts[i].memctl_interleaving_mode) { + case FSL_DDR_CACHE_LINE_INTERLEAVING: + case FSL_DDR_PAGE_INTERLEAVING: + case FSL_DDR_BANK_INTERLEAVING: + case FSL_DDR_SUPERBANK_INTERLEAVING: + if (i == 0) { + law_memctl = LAW_TRGT_IF_DDR_INTRLV; + fsl_ddr_set_lawbar(&info.common_timing_params[i], + law_memctl, i); + } else if (i == 2) { + law_memctl = LAW_TRGT_IF_DDR_INTLV_34; + fsl_ddr_set_lawbar(&info.common_timing_params[i], + law_memctl, i); + } + break; + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + law_memctl = LAW_TRGT_IF_DDR_INTLV_123; + if (i == 0) { + fsl_ddr_set_lawbar(&info.common_timing_params[i], + law_memctl, i); + } + break; + case FSL_DDR_4WAY_1KB_INTERLEAVING: + case FSL_DDR_4WAY_4KB_INTERLEAVING: + case FSL_DDR_4WAY_8KB_INTERLEAVING: + law_memctl = LAW_TRGT_IF_DDR_INTLV_1234; + if (i == 0) + fsl_ddr_set_lawbar(&info.common_timing_params[i], + law_memctl, i); + /* place holder for future 4-way interleaving */ + break; + default: + break; + } + } else { + switch (i) { + case 0: + law_memctl = LAW_TRGT_IF_DDR_1; + break; + case 1: + law_memctl = LAW_TRGT_IF_DDR_2; + break; + case 2: + law_memctl = LAW_TRGT_IF_DDR_3; + break; + case 3: + law_memctl = LAW_TRGT_IF_DDR_4; + break; + default: + break; + } + fsl_ddr_set_lawbar(&info.common_timing_params[i], + law_memctl, i); + } + } + + debug("total_memory by %s = %llu\n", __func__, total_memory); + +#if !defined(CONFIG_PHYS_64BIT) + /* Check for 4G or more. Bad. */ + if (total_memory >= (1ull << 32)) { + printf("Detected %lld MB of memory\n", total_memory >> 20); + printf(" This U-Boot only supports < 4G of DDR\n"); + printf(" You could rebuild it with CONFIG_PHYS_64BIT\n"); + printf(" "); /* re-align to match init_func_ram print */ + total_memory = CONFIG_MAX_MEM_MAPPED; + } +#endif + + return total_memory; +} + +/* + * fsl_ddr_sdram_size() - This function only returns the size of the total + * memory without setting ddr control registers. + */ +phys_size_t +fsl_ddr_sdram_size(void) +{ + fsl_ddr_info_t info; + unsigned long long total_memory = 0; + + memset(&info, 0 , sizeof(fsl_ddr_info_t)); + + /* Compute it once normally. */ + total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 1); + + return total_memory; +} -- 1.7.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox