mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Juergen Beisert <jbe@pengutronix.de>
Subject: [PATCH 01/17] clk: divider: Add onebased divider support
Date: Thu, 20 Jun 2013 08:54:05 +0200	[thread overview]
Message-ID: <1371711261-10039-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1371711261-10039-1-git-send-email-s.hauer@pengutronix.de>

In some dividers the register value matches the divider value. This
patch adds support for them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/clk-divider.c | 44 ++++++++++++++++++++++++++++++++------------
 include/linux/clk.h       | 15 +++++++++++++++
 2 files changed, 47 insertions(+), 12 deletions(-)

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 58a7ea5..3bf8105 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -20,13 +20,12 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-struct clk_divider {
-	struct clk clk;
-	u8 shift;
-	u8 width;
-	void __iomem *reg;
-	const char *parent;
-};
+static unsigned int clk_divider_maxdiv(struct clk_divider *div)
+{
+	if (div->flags & CLK_DIVIDER_ONE_BASED)
+                return (1 << div->width) - 1;
+	return 1 << div->width;
+}
 
 static int clk_divider_set_rate(struct clk *clk, unsigned long rate,
 		unsigned long parent_rate)
@@ -40,11 +39,11 @@ static int clk_divider_set_rate(struct clk *clk, unsigned long rate,
 		rate = 1;
 
 	divval = DIV_ROUND_UP(parent_rate, rate);
+	if (divval > clk_divider_maxdiv(div))
+		divval = clk_divider_maxdiv(div);
 
-	if (divval > (1 << div->width))
-		divval = 1 << (div->width);
-
-	divval--;
+	if (!(div->flags & CLK_DIVIDER_ONE_BASED))
+		divval--;
 
 	val = readl(div->reg);
 	val &= ~(((1 << div->width) - 1) << div->shift);
@@ -63,7 +62,12 @@ static unsigned long clk_divider_recalc_rate(struct clk *clk,
 	val = readl(div->reg) >> div->shift;
 	val &= (1 << div->width) - 1;
 
-	val++;
+	if (div->flags & CLK_DIVIDER_ONE_BASED) {
+		if (!val)
+			val++;
+	} else {
+		val++;
+	}
 
 	return parent_rate / val;
 }
@@ -96,3 +100,19 @@ struct clk *clk_divider(const char *name, const char *parent,
 
 	return &div->clk;
 }
+
+struct clk *clk_divider_one_based(const char *name, const char *parent,
+		void __iomem *reg, u8 shift, u8 width)
+{
+	struct clk_divider *div;
+	struct clk *clk;
+
+	clk = clk_divider(name, parent, reg, shift, width);
+	if (IS_ERR(clk))
+		return clk;
+
+	div = container_of(clk, struct clk_divider, clk);
+	div->flags |= CLK_DIVIDER_ONE_BASED;
+
+	return clk;
+}
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 37a4813..9c41cb8 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -188,8 +188,23 @@ struct clk_div_table {
 };
 
 struct clk *clk_fixed(const char *name, int rate);
+
+struct clk_divider {
+	struct clk clk;
+	u8 shift;
+	u8 width;
+	void __iomem *reg;
+	const char *parent;
+#define CLK_DIVIDER_ONE_BASED	(1 << 0)
+	unsigned flags;
+};
+
+extern struct clk_ops clk_divider_ops;
+
 struct clk *clk_divider(const char *name, const char *parent,
 		void __iomem *reg, u8 shift, u8 width);
+struct clk *clk_divider_one_based(const char *name, const char *parent,
+		void __iomem *reg, u8 shift, u8 width);
 struct clk *clk_divider_table(const char *name,
 		const char *parent, void __iomem *reg, u8 shift, u8 width,
 		const struct clk_div_table *table);
-- 
1.8.3.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-06-20  6:54 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-20  6:54 [PATCH] convert MXS to common clk Sascha Hauer
2013-06-20  6:54 ` Sascha Hauer [this message]
2013-06-20  6:54 ` [PATCH 02/17] clk: gate: Add inverted gate support Sascha Hauer
2013-06-20  6:54 ` [PATCH 03/17] clk: add prototype for clk_is_enabled Sascha Hauer
2013-06-20  6:54 ` [PATCH 04/17] ARM: MXS: Add MXS specific clk types Sascha Hauer
2013-06-21 12:14   ` Jürgen Beisert
2013-06-20  6:54 ` [PATCH 05/17] ARM: MXS: add clk drivers Sascha Hauer
2013-06-20  6:54 ` [PATCH 06/17] ARM: MXS: remove board specific clock setups Sascha Hauer
2013-06-20  6:54 ` [PATCH 07/17] mci: mxs: Use dev_* Sascha Hauer
2013-06-20  6:54 ` [PATCH 08/17] net: fec: Use clk API unconditionally Sascha Hauer
2013-06-20  6:54 ` [PATCH 09/17] mci: mxs: use common clk API Sascha Hauer
2013-06-20  6:54 ` [PATCH 10/17] mtd: gpmi-nand: switch to clk support Sascha Hauer
2013-06-20  6:54 ` [PATCH 11/17] serial: auart: Use " Sascha Hauer
2013-06-20  6:54 ` [PATCH 12/17] serial: stm: " Sascha Hauer
2013-06-20  6:54 ` [PATCH 13/17] spi: mxs: " Sascha Hauer
2013-06-20  6:54 ` [PATCH 14/17] ARM: MXS: octotp: switch to " Sascha Hauer
2013-06-20  6:54 ` [PATCH 15/17] ARM: MXS: remove imx_enable_enetclk Sascha Hauer
2013-06-20  6:54 ` [PATCH 16/17] video: stm: switch to clk support Sascha Hauer
2013-06-20  6:54 ` [PATCH 17/17] ARM: MXS: remove old clock support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371711261-10039-2-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=jbe@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox