mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Renaud Barbier <renaud.barbier@ge.com>
To: barebox@lists.infradead.org
Subject: [PATCH 6/8] ppx 8xxx: DDR registers value calculation
Date: Tue, 25 Jun 2013 11:45:35 +0100	[thread overview]
Message-ID: <1372157137-7602-7-git-send-email-renaud.barbier@ge.com> (raw)
In-Reply-To: <1370019244-7873-1-git-send-email-renaud.barbier@ge.com>

The functions in this file calculate and store the value for each
register of the memory controller.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
---
 arch/ppc/ddr-8xxx/ctrl_regs.c |  425 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 425 insertions(+), 0 deletions(-)
 create mode 100644 arch/ppc/ddr-8xxx/ctrl_regs.c

diff --git a/arch/ppc/ddr-8xxx/ctrl_regs.c b/arch/ppc/ddr-8xxx/ctrl_regs.c
new file mode 100644
index 0000000..3f8ecf7
--- /dev/null
+++ b/arch/ppc/ddr-8xxx/ctrl_regs.c
@@ -0,0 +1,425 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Generic driver for Freescale DDR2 memory controller.
+ * Based on code from spd_sdram.c
+ * Author: James Yang [at freescale.com]
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+#include "ddr.h"
+
+static void set_csn_config(int dimm_number, int i,
+			   struct fsl_ddr_cfg_regs_s *ddr,
+			   const struct memctl_options_s *popts,
+			   const struct dimm_params_s *dimm)
+{
+	uint32_t cs_n_en = 0, ap_n_en = 0, odt_rd_cfg = 0, odt_wr_cfg = 0,
+		 ba_bits_cs_n = 0, row_bits_cs_n = 0, col_bits_cs_n = 0,
+		 n_banks_per_sdram_device;
+	int go_config = 0;
+
+	switch (i) {
+	case 0:
+		if (dimm[dimm_number].n_ranks > 0)
+			go_config = 1;
+		break;
+	case 1:
+		if ((dimm_number == 0 && dimm[0].n_ranks > 1) ||
+		    (dimm_number == 1 && dimm[1].n_ranks > 0))
+			go_config = 1;
+		break;
+	case 2:
+		if ((dimm_number == 0 && dimm[0].n_ranks > 2) ||
+		    (dimm_number >= 1 && dimm[dimm_number].n_ranks > 0))
+			go_config = 1;
+		break;
+	case 3:
+		if ((dimm_number == 0 && dimm[0].n_ranks > 3) ||
+		    (dimm_number == 1 && dimm[1].n_ranks > 1) ||
+		    (dimm_number == 3 && dimm[3].n_ranks > 0))
+			go_config = 1;
+		break;
+	default:
+		break;
+	}
+
+	if (go_config) {
+		/* Chip Select enable */
+		cs_n_en = 1;
+		/* CSn auto-precharge enable */
+		ap_n_en = popts->cs_local_opts[i].auto_precharge;
+		/* ODT for reads configuration */
+		odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg;
+		/* ODT for writes configuration */
+		odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg;
+		/* Num of bank bits for SDRAM on CSn */
+		n_banks_per_sdram_device =
+			dimm[dimm_number].n_banks_per_sdram_device;
+		ba_bits_cs_n = __ilog2(n_banks_per_sdram_device) - 2;
+		/* Num of row bits for SDRAM on CSn */
+		row_bits_cs_n = dimm[dimm_number].n_row_addr - 12;
+		/* Num of ocl bits for SDRAM on CSn */
+		col_bits_cs_n = dimm[dimm_number].n_col_addr - 8;
+	}
+
+	ddr->cs[i].config = (((cs_n_en & 0x1) << 31)
+			     | ((ap_n_en & 0x1) << 23)
+			     | ((odt_rd_cfg & 0x7) << 20)
+			     | ((odt_wr_cfg & 0x7) << 16)
+			     | ((ba_bits_cs_n & 0x3) << 14)
+			     | ((row_bits_cs_n & 0x7) << 8)
+			     | ((col_bits_cs_n & 0x7) << 0));
+}
+
+static void set_timing_cfg_0(struct fsl_ddr_cfg_regs_s *ddr,
+			     const struct memctl_options_s *popts)
+{
+	uint32_t trwt_mclk = 0;
+
+	if (popts->trwt_override)
+		trwt_mclk = popts->trwt;
+
+	ddr->timing_cfg_0 = (((trwt_mclk & 0x3) << 30)
+			     | ((popts->txard & 0x7) << 20)
+			     | ((popts->txp & 0xF) << 16)
+			     | ((popts->taxpd & 0xf) << 8)
+			     | ((popts->tmrd & 0xf) << 0));
+}
+
+static void set_timing_cfg_3(struct fsl_ddr_cfg_regs_s *ddr,
+			     const struct common_timing_params_s *dimm,
+			     uint32_t cas_latency)
+{
+	uint32_t ext_pretoact, ext_acttopre, ext_acttorw, ext_refrec;
+
+	ext_pretoact = picos_to_mclk(dimm->tRP_ps) >> 4;
+	ext_acttopre = picos_to_mclk(dimm->tRAS_ps) >> 4;
+	ext_acttorw = picos_to_mclk(dimm->tRCD_ps) >> 4;
+	cas_latency = ((cas_latency << 1) - 1) >> 4;
+	ext_refrec = (picos_to_mclk(dimm->tRFC_ps) - 8) >> 4;
+
+	ddr->timing_cfg_3 = (((ext_pretoact & 0x1) << 28)
+			     | ((ext_acttopre & 0x2) << 24)
+			     | ((ext_acttorw & 0x1) << 22)
+			     | ((ext_refrec & 0x1F) << 16)
+			     | ((cas_latency & 0x3) << 12));
+}
+
+static void set_timing_cfg_1(struct fsl_ddr_cfg_regs_s *ddr,
+			     const struct common_timing_params_s *dimm,
+			     uint32_t cas_latency)
+{
+	uint32_t pretoact_mclk, acttopre_mclk, acttorw_mclk, refrec_ctrl,
+		 wrrec_mclk, acttoact_mclk, wrtord_mclk;
+	/* DDR_SDRAM_MODE doesn't support 9,11,13,15 */
+	static const u8 wrrec_table[] = {
+		1, 2, 3, 4, 5, 6, 7, 8, 10, 10, 12, 12, 14, 14, 0, 0
+	};
+
+	pretoact_mclk = picos_to_mclk(dimm->tRP_ps);
+	acttopre_mclk = picos_to_mclk(dimm->tRAS_ps);
+	acttorw_mclk = picos_to_mclk(dimm->tRCD_ps);
+
+	/*
+	 * Translate CAS Latency to a DDR controller field value:
+	 *
+	 *      CAS Lat DDR II  Ctrl
+	 *      Clocks  SPD Bit Value
+	 *      ------- ------- ------
+	 *      1.0             0001
+	 *      1.5             0010
+	 *      2.0     2       0011
+	 *      2.5             0100
+	 *      3.0     3       0101
+	 *      3.5             0110
+	 *      4.0     4       0111
+	 *      4.5             1000
+	 *      5.0     5       1001
+	 */
+	cas_latency = (cas_latency << 1) - 1;
+	refrec_ctrl = picos_to_mclk(dimm->tRFC_ps) - 8;
+	acttoact_mclk = picos_to_mclk(dimm->tRRD_ps);
+
+	wrrec_mclk = picos_to_mclk(dimm->tWR_ps);
+	if (wrrec_mclk <= 16)
+		wrrec_mclk = wrrec_table[wrrec_mclk - 1];
+
+	wrtord_mclk = picos_to_mclk(dimm->tWTR_ps);
+	if (wrtord_mclk < 2)
+		wrtord_mclk = 2;
+
+	ddr->timing_cfg_1 = (((pretoact_mclk & 0x0F) << 28)
+			     | ((acttopre_mclk & 0x0F) << 24)
+			     | ((acttorw_mclk & 0xF) << 20)
+			     | ((cas_latency & 0xF) << 16)
+			     | ((refrec_ctrl & 0xF) << 12)
+			     | ((wrrec_mclk & 0x0F) << 8)
+			     | ((acttoact_mclk & 0x0F) << 4)
+			     | ((wrtord_mclk & 0x0F) << 0));
+}
+
+static void set_timing_cfg_2(struct fsl_ddr_cfg_regs_s *ddr,
+			     const struct memctl_options_s *popts,
+			     const struct common_timing_params_s *dimm,
+			     uint32_t cas_latency, uint32_t additive_latency)
+{
+	uint32_t cpo, rd_to_pre, wr_data_delay, cke_pls, four_act;
+
+	cpo = popts->cpo_override;
+	rd_to_pre = picos_to_mclk(dimm->tRTP_ps);
+	if (rd_to_pre < 2)
+		rd_to_pre = 2;
+
+	if (additive_latency)
+		rd_to_pre += additive_latency;
+
+	wr_data_delay = popts->write_data_delay;
+	cke_pls = picos_to_mclk(popts->tCKE_clock_pulse_width_ps);
+	four_act = picos_to_mclk(popts->tFAW_window_four_activates_ps);
+
+	ddr->timing_cfg_2 = (((additive_latency & 0xf) << 28)
+			     | ((cpo & 0x1f) << 23)
+			     | (((cas_latency - 1) & 0xf) << 19)
+			     | ((rd_to_pre & 7) << 13)
+			     | ((wr_data_delay & 7) << 10)
+			     | ((cke_pls & 0x7) << 6)
+			     | ((four_act & 0x3f) << 0));
+}
+
+static void set_ddr_sdram_cfg(struct fsl_ddr_cfg_regs_s *ddr,
+			      const struct memctl_options_s *popts,
+			      const struct common_timing_params_s *dimm)
+{
+	uint32_t mem_en, sren, ecc_en, sdram_type, dyn_pwr, dbw, twoT_en, hse;
+
+	mem_en = 1;
+	sren = popts->self_refresh_in_sleep;
+	if (dimm->all_DIMMs_ECC_capable)
+		ecc_en = popts->ECC_mode;
+	else
+		ecc_en = 0;
+
+	if (popts->sdram_type)
+		sdram_type = popts->sdram_type;
+	else
+		sdram_type = FSL_SDRAM_TYPE;
+
+	twoT_en = popts->twoT_en;
+	dyn_pwr = popts->dynamic_power;
+	dbw = popts->data_bus_width;
+	hse = popts->half_strength_driver_enable;
+
+	ddr->ddr_sdram_cfg = (((mem_en & 0x1) << 31)
+			      | ((sren & 0x1) << 30)
+			      | ((ecc_en & 0x1) << 29)
+			      | ((sdram_type & 0x7) << 24)
+			      | ((dyn_pwr & 0x1) << 21)
+			      | ((dbw & 0x3) << 19)
+			      | ((twoT_en & 0x1) << 15)
+			      | ((hse & 0x1) << 3));
+}
+
+static void set_ddr_sdram_cfg_2(struct fsl_ddr_cfg_regs_s *ddr,
+				const struct memctl_options_s *popts)
+{
+	struct ddr_board_info_s *bi = popts->board_info;
+	uint32_t i, dll_rst_dis, dqs_cfg, odt_cfg = 0, num_pr, d_init = 0;
+
+	dll_rst_dis = popts->dll_rst_dis;
+	dqs_cfg = popts->DQS_config;
+
+	/*
+	 * Check for On-Die Termination options and
+	 * assert ODT only during reads to DRAM.
+	 */
+	for (i = 0; i < bi->cs_per_ctrl; i++)
+		if (popts->cs_local_opts[i].odt_rd_cfg ||
+				popts->cs_local_opts[i].odt_wr_cfg) {
+			odt_cfg = SDRAM_CFG2_ODT_ONLY_READ;
+			break;
+		}
+
+	/* Default number of posted refresh */
+	num_pr = 1;
+
+	if (popts->ECC_init_using_memctl) {
+		d_init = 1;
+		ddr->ddr_data_init = popts->data_init;
+	}
+
+	ddr->ddr_sdram_cfg_2 = (((dll_rst_dis & 0x1) << 29)
+				| ((dqs_cfg & 0x3) << 26)
+				| ((odt_cfg & 0x3) << 21)
+				| ((num_pr & 0xf) << 12)
+				| ((d_init & 0x1) << 4));
+}
+
+static void
+set_ddr_sdram_interval(struct fsl_ddr_cfg_regs_s *ddr,
+		const struct memctl_options_s *popts,
+		const struct common_timing_params_s *dimm)
+{
+	uint32_t refint, bstopre;
+
+	refint = picos_to_mclk(dimm->refresh_rate_ps);
+	/* Precharge interval */
+	bstopre = popts->bstopre;
+
+	ddr->ddr_sdram_interval = (((refint & 0xFFFF) << 16)
+				   | ((bstopre & 0x3FFF) << 0));
+}
+
+static void set_ddr_sdram_mode(struct fsl_ddr_cfg_regs_s *ddr,
+			       const struct memctl_options_s *popts,
+			       const struct common_timing_params_s *dimm,
+			       uint32_t cas_latency,
+			       uint32_t additive_latency)
+{
+	uint16_t esdmode, sdmode;
+	uint32_t dqs_en, rtt, al, wr, bl;
+	const uint32_t mclk_ps = get_memory_clk_period_ps();
+
+	/* DQS# Enable: 0=enable, 1=disable */
+	dqs_en = !popts->DQS_config;
+	/* Posted CAS# additive latency (AL) */
+	al = additive_latency;
+	/* Internal Termination Resistor */
+	if (popts->rtt_override)
+		rtt = popts->rtt_override_value;
+	else
+		rtt = popts->cs_local_opts[0].odt_rtt_norm;
+
+	/*
+	 * Extended SDRAM mode.
+	 * The variable also selects:
+	 * - OCD set to exit mode
+	 * - all outputs bit i.e DQ, DQS, RDQS output enabled
+	 * - RDQS ball disabled
+	 * - DQS ball enabled
+	 * - DLL enabled
+	 * - Output drive strength: full strength.
+	 */
+	esdmode = (((dqs_en & 0x1) << 10)
+		   | ((rtt & 0x2) << 5)
+		   | ((al & 0x7) << 3)
+		   | ((rtt & 0x1) << 2));
+
+	/* Write recovery */
+	wr = (dimm->tWR_ps + mclk_ps - 1) / (mclk_ps - 1);
+
+	switch (popts->burst_length) {
+	case DDR_BL4:
+		bl = 2;
+		break;
+	case DDR_BL8:
+		bl = 3;
+		break;
+	default:
+		bl = 2;
+		break;
+	}
+
+	/* SDRAM mode
+	 * The variable also selects:
+	 * - power down mode: fast exit (normal)
+	 * - DLL reset disabled.
+	 * - burst type: sequential
+	 */
+	sdmode = (((wr & 0x7) << 9)
+		  | ((cas_latency & 0x7) << 4)
+		  | ((bl & 0x7) << 0));
+
+	ddr->ddr_sdram_mode = (((esdmode & 0xFFFF) << 16)
+			       | ((sdmode & 0xFFFF) << 0));
+}
+
+uint32_t check_fsl_memctl_config_regs(const struct fsl_ddr_cfg_regs_s *ddr)
+{
+	/*
+	 * DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN should not
+	 * be set at the same time.
+	 */
+	if ((ddr->ddr_sdram_cfg & 0x10000000) &&
+			(ddr->ddr_sdram_cfg & 0x00008000))
+		return 1;
+
+	return 0;
+}
+
+uint32_t
+compute_fsl_memctl_config_regs(const struct memctl_options_s *popts,
+			       struct fsl_ddr_cfg_regs_s *ddr,
+			       const struct common_timing_params_s *dimm,
+			       const struct dimm_params_s *dimmp,
+			       uint32_t dbw_cap_adj)
+{
+	struct ddr_board_info_s *binfo = popts->board_info;
+	uint32_t cas_latency, additive_latency, i, cs_per_dimm,
+		 dimm_number;
+	uint64_t ea, sa, rank_density;
+
+	if (dimm == NULL)
+		return 1;
+
+	memset(ddr, 0, sizeof(struct fsl_ddr_cfg_regs_s));
+
+	/* Process overrides first.  */
+	if (popts->cas_latency_override)
+		cas_latency = popts->cas_latency_override_value;
+	else
+		cas_latency =  dimm->lowest_common_SPD_caslat;
+
+	if (popts->additive_latency_override)
+		additive_latency = popts->additive_latency_override_value;
+	else
+		additive_latency = dimm->additive_latency;
+
+	/* Chip Select Memory Bounds (CSn_BNDS) */
+	for (i = 0; i < binfo->cs_per_ctrl; i++) {
+		cs_per_dimm = binfo->cs_per_ctrl / binfo->dimm_slots_per_ctrl;
+		dimm_number = i / cs_per_dimm;
+		rank_density =
+			dimmp[dimm_number].rank_density >> dbw_cap_adj;
+
+		if (dimmp[dimm_number].n_ranks == 0)
+			continue;
+
+		sa = dimmp[dimm_number].base_address;
+		ea = sa + rank_density - 1;
+		if (dimmp[dimm_number].n_ranks > (i % cs_per_dimm)) {
+			sa += (i % cs_per_dimm) * rank_density;
+			ea += (i % cs_per_dimm) * rank_density;
+		} else {
+			sa = 0;
+			ea = 0;
+		}
+		sa >>= 24;
+		ea >>= 24;
+
+		ddr->cs[i].bnds = (((sa & 0xFFF) << 16) | ((ea & 0xFFF) << 0));
+		set_csn_config(dimm_number, i, ddr, popts, dimmp);
+	}
+
+	set_timing_cfg_0(ddr, popts);
+	set_timing_cfg_3(ddr, dimm, cas_latency);
+	set_timing_cfg_1(ddr, dimm, cas_latency);
+	set_timing_cfg_2(ddr, popts, dimm, cas_latency, additive_latency);
+	set_ddr_sdram_cfg(ddr, popts, dimm);
+	set_ddr_sdram_cfg_2(ddr, popts);
+	set_ddr_sdram_mode(ddr, popts, dimm, cas_latency, additive_latency);
+	set_ddr_sdram_interval(ddr, popts, dimm);
+
+	ddr->ddr_data_init = popts->data_init;
+	ddr->ddr_sdram_clk_cntl = (popts->clk_adjust & 0xF) << 23;
+
+	return check_fsl_memctl_config_regs(ddr);
+}
-- 
1.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2013-06-25 10:47 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-31 16:53 [PATCH 0/8] U-Boot DDR initialisation import Renaud Barbier
2013-05-31 16:53 ` [PATCH 1/8] ppc 8xxx: DDR headers Renaud Barbier
2013-05-31 16:53 ` [PATCH 2/8] ppc 8xxx: memory controller register manipulation functions Renaud Barbier
2013-05-31 16:53 ` [PATCH 3/8] ppc 8xxx: dimm parameters calculation Renaud Barbier
2013-05-31 16:54 ` [PATCH 4/8] ppc 8xxx: lowest common dimm parameters Renaud Barbier
2013-05-31 16:54 ` [PATCH 5/8] ppc 8xxx: DDR utility functions Renaud Barbier
2013-05-31 16:54 ` [PATCH 6/8] ppc 8xxx: DDR specific options Renaud Barbier
2013-05-31 16:54 ` [PATCH 7/8] ppc 8xxx: core DDR driver functions Renaud Barbier
2013-06-02 15:44   ` Sascha Hauer
2013-06-12 14:51     ` Renaud Barbier
2013-05-31 16:54 ` [PATCH 8/8] ppc 8xxx: remove interactive debugging Renaud Barbier
2013-06-25 10:45 ` [PATCH v2 0/8] DDR2 memory initialisaion Renaud Barbier
2013-06-26  6:34   ` Sascha Hauer
2013-06-26 17:33   ` [PATCH v3 0/8] DDR2 memory initialisation Renaud Barbier
2013-06-27  6:39     ` Sascha Hauer
2013-06-26 17:33   ` [PATCH 1/8] common: DDR2 SPD checksum Renaud Barbier
2013-06-26 17:33   ` [PATCH 2/8] ppc asm: DDR headers Renaud Barbier
2013-06-26 17:33   ` [PATCH 3/8] ppc 8xxx: " Renaud Barbier
2013-06-26 17:33   ` [PATCH 4/8] ppc 8xxx: DIMM parameters calculation Renaud Barbier
2013-06-26 17:33   ` [PATCH 5/8] ppc 8xxx: DDR utility and memory options Renaud Barbier
2013-06-26 17:33   ` [PATCH 6/8] ppx 8xxx: DDR registers value calculation Renaud Barbier
2013-06-26 17:33   ` [PATCH 7/8] ppc 8xxx: core DDR driver functions Renaud Barbier
2013-06-26 17:33   ` [PATCH 8/8] ppc 85xx: early I2C support Renaud Barbier
2013-06-25 10:45 ` [PATCH 1/8] common: DDR2 SPD checksum Renaud Barbier
2013-06-26  6:26   ` Sascha Hauer
2013-06-25 10:45 ` [PATCH 2/8] ppc asm: DDR headers Renaud Barbier
2013-06-25 10:45 ` [PATCH 3/8] ppc 8xxx: " Renaud Barbier
2013-06-25 10:45 ` [PATCH 4/8] ppc 8xxx: DIMM parameters calculation Renaud Barbier
2013-06-25 10:45 ` [PATCH 5/8] ppc 8xxx: DDR utility and memory options Renaud Barbier
2013-06-25 10:45 ` Renaud Barbier [this message]
2013-06-25 10:45 ` [PATCH 7/8] ppc 8xxx: core DDR driver functions Renaud Barbier
2013-06-25 10:45 ` [PATCH 8/8] ppc 85xx: early I2C support Renaud Barbier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1372157137-7602-7-git-send-email-renaud.barbier@ge.com \
    --to=renaud.barbier@ge.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox