From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from exprod5og118.obsmtp.com ([64.18.0.160]) by merlin.infradead.org with smtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Urtcv-0002NM-2v for barebox@lists.infradead.org; Wed, 26 Jun 2013 17:35:30 +0000 From: Renaud Barbier Date: Wed, 26 Jun 2013 18:33:46 +0100 Message-Id: <1372268027-15271-8-git-send-email-renaud.barbier@ge.com> In-Reply-To: <1372157137-7602-1-git-send-email-renaud.barbier@ge.com> References: <1372157137-7602-1-git-send-email-renaud.barbier@ge.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 7/8] ppc 8xxx: core DDR driver functions To: barebox@lists.infradead.org These files are the driver interface to handle the memory initialisation from reading the SPD data to writing the memory controller registers. This code is based on the equivalent files main.c in directory arch/powerpc/cpu/mpc8xxx/ddr and ddr-gen2.c in directory arch/powerpc/cpu/mpc85xx. Both are from U-Boot version git-a71d45d. Signed-off-by: Renaud Barbier --- arch/ppc/ddr-8xxx/ddr2_setctrl.c | 58 +++++++++ arch/ppc/ddr-8xxx/main.c | 238 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 296 insertions(+), 0 deletions(-) create mode 100644 arch/ppc/ddr-8xxx/ddr2_setctrl.c create mode 100644 arch/ppc/ddr-8xxx/main.c diff --git a/arch/ppc/ddr-8xxx/ddr2_setctrl.c b/arch/ppc/ddr-8xxx/ddr2_setctrl.c new file mode 100644 index 0000000..14571b0 --- /dev/null +++ b/arch/ppc/ddr-8xxx/ddr2_setctrl.c @@ -0,0 +1,58 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include "ddr.h" + +int fsl_ddr_set_memctl_regs(const struct fsl_ddr_info_s *info) +{ + uint32_t i; + void __iomem *ddr; + const struct fsl_ddr_cfg_regs_s *regs; + + regs = &info->fsl_ddr_config_reg; + ddr = info->board_info.ddr_base; + + if (in_be32(ddr + DDR_OFF(SDRAM_CFG)) & SDRAM_CFG_MEM_EN) + return 0; + + for (i = 0; i < info->board_info.cs_per_ctrl; i++) { + out_be32(ddr + DDR_OFF(CS0_BNDS) + (i << 3), regs->cs[i].bnds); + out_be32(ddr + DDR_OFF(CS0_CONFIG) + (i << 2), + regs->cs[i].config); + } + + out_be32(ddr + DDR_OFF(TIMING_CFG_3), regs->timing_cfg_3); + out_be32(ddr + DDR_OFF(TIMING_CFG_0), regs->timing_cfg_0); + out_be32(ddr + DDR_OFF(TIMING_CFG_1), regs->timing_cfg_1); + out_be32(ddr + DDR_OFF(TIMING_CFG_2), regs->timing_cfg_2); + out_be32(ddr + DDR_OFF(SDRAM_CFG_2), regs->ddr_sdram_cfg_2); + out_be32(ddr + DDR_OFF(SDRAM_MODE), regs->ddr_sdram_mode); + out_be32(ddr + DDR_OFF(SDRAM_MODE_2), regs->ddr_sdram_mode_2); + out_be32(ddr + DDR_OFF(SDRAM_MD_CNTL), regs->ddr_sdram_md_cntl); + out_be32(ddr + DDR_OFF(SDRAM_INTERVAL), regs->ddr_sdram_interval); + out_be32(ddr + DDR_OFF(SDRAM_DATA_INIT), regs->ddr_data_init); + out_be32(ddr + DDR_OFF(SDRAM_CLK_CNTL), regs->ddr_sdram_clk_cntl); + out_be32(ddr + DDR_OFF(SDRAM_INIT_ADDR), regs->ddr_init_addr); + out_be32(ddr + DDR_OFF(SDRAM_INIT_ADDR_EXT), regs->ddr_init_ext_addr); + + early_udelay(200); + asm volatile("sync;isync"); + + out_be32(ddr + DDR_OFF(SDRAM_CFG), regs->ddr_sdram_cfg); + + /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ + while (in_be32(ddr + DDR_OFF(SDRAM_CFG_2)) & SDRAM_CFG2_D_INIT) + early_udelay(10000); + + return 0; +} diff --git a/arch/ppc/ddr-8xxx/main.c b/arch/ppc/ddr-8xxx/main.c new file mode 100644 index 0000000..6e4a02d --- /dev/null +++ b/arch/ppc/ddr-8xxx/main.c @@ -0,0 +1,238 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +/* + * Generic driver for Freescale DDR2 memory controller. + * Based on code from spd_sdram.c + * Author: James Yang [at freescale.com] + */ + +#include +#include +#include +#include "ddr.h" + +static int get_spd(generic_spd_eeprom_t *spd, + struct ddr_board_info_s *bi, u8 i2c_address) +{ + int ret; + + fsl_i2c_init(bi->i2c_base, bi->i2c_speed, bi->i2c_slave); + ret = fsl_i2c_read(bi->i2c_base, i2c_address, 0, 1, (uchar *) spd, + sizeof(generic_spd_eeprom_t)); + fsl_i2c_stop(bi->i2c_base); + + return ret; +} + +int fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, + struct ddr_board_info_s *binfo) +{ + uint32_t i; + uint8_t i2c_address; + + for (i = 0; i < binfo->dimm_slots_per_ctrl; i++) { + if (binfo->spd_i2c_addr == NULL) + goto error; + i2c_address = binfo->spd_i2c_addr[i]; + if (get_spd(&(ctrl_dimms_spd[i]), binfo, i2c_address)) + goto error; + } + + return 0; +error: + return 1; +} + +static uint64_t step_assign_addresses(struct fsl_ddr_info_s *pinfo, + uint32_t dbw_cap_adj) +{ + uint64_t total_mem, current_mem_base, total_ctlr_mem, cap; + uint32_t ndimm, dw, j, found = 0; + + ndimm = pinfo->board_info.dimm_slots_per_ctrl; + /* + * If a reduced data width is requested, but the SPD + * specifies a physically wider device, adjust the + * computed dimm capacities accordingly before + * assigning addresses. + */ + switch (pinfo->memctl_opts.data_bus_width) { + case 2: + /* 16-bit */ + for (j = 0; j < ndimm; j++) { + if (!pinfo->dimm_params[j].n_ranks) + continue; + dw = pinfo->dimm_params[j].primary_sdram_width; + if ((dw == 72 || dw == 64)) { + dbw_cap_adj = 2; + break; + } else if ((dw == 40 || dw == 32)) { + dbw_cap_adj = 1; + break; + } + } + break; + case 1: + /* 32-bit */ + for (j = 0; j < ndimm; j++) { + dw = pinfo->dimm_params[j].data_width; + if (pinfo->dimm_params[j].n_ranks + && (dw == 72 || dw == 64)) { + /* + * FIXME: can't really do it + * like this because this just + * further reduces the memory + */ + found = 1; + break; + } + } + if (found) + dbw_cap_adj = 1; + break; + case 0: + /* 64-bit */ + break; + default: + return 1; + } + + current_mem_base = 0ull; + total_mem = 0; + total_ctlr_mem = 0; + pinfo->common_timing_params.base_address = current_mem_base; + + for (j = 0; j < ndimm; j++) { + cap = pinfo->dimm_params[j].capacity >> dbw_cap_adj; + pinfo->dimm_params[j].base_address = current_mem_base; + current_mem_base += cap; + total_ctlr_mem += cap; + + } + + pinfo->common_timing_params.total_mem = total_ctlr_mem; + total_mem += total_ctlr_mem; + + return total_mem; +} + +static uint32_t retrieve_max_size(struct fsl_ddr_cfg_regs_s *ddr_reg, + uint32_t ncs) +{ + uint32_t max_end = 0, end, i; + + for (i = 0; i < ncs; i++) + if (ddr_reg->cs[i].config & 0x80000000) { + end = ddr_reg->cs[i].bnds & 0xFFF; + if (end > max_end) + max_end = end; + } + + return max_end; +} + +static uint32_t compute_dimm_param(struct fsl_ddr_info_s *pinfo, uint32_t ndimm) +{ + struct dimm_params_s *pdimm; + generic_spd_eeprom_t *spd; + uint32_t i, retval; + + for (i = 0; i < ndimm; i++) { + spd = &(pinfo->spd_installed_dimms[i]); + pdimm = &(pinfo->dimm_params[i]); + + retval = compute_dimm_parameters(spd, pdimm); + + if (retval == 2) /* Fatal error */ + return 1; + } + + return 0; +} + +uint64_t fsl_ddr_compute(struct fsl_ddr_info_s *pinfo) +{ + uint64_t total_mem = 0; + uint32_t ncs, ndimm, max_end = 0; + struct fsl_ddr_cfg_regs_s *ddr_reg; + struct common_timing_params_s *timing_params; + /* data bus width capacity adjust shift amount */ + uint32_t dbw_capacity_adjust; + + ddr_reg = &pinfo->fsl_ddr_config_reg; + timing_params = &pinfo->common_timing_params; + ncs = pinfo->board_info.cs_per_ctrl; + ndimm = pinfo->board_info.dimm_slots_per_ctrl; + dbw_capacity_adjust = 0; + pinfo->memctl_opts.board_info = &pinfo->board_info; + + /* STEP 1: Gather all DIMM SPD data */ + if (fsl_ddr_get_spd(pinfo->spd_installed_dimms, + pinfo->memctl_opts.board_info)) + return 0; + + /* STEP 2: Compute DIMM parameters from SPD data */ + if (compute_dimm_param(pinfo, ndimm)) + return 0; + + /* + * STEP 3: Compute a common set of timing parameters + * suitable for all of the DIMMs on each memory controller + */ + compute_lowest_common_dimm_parameters(pinfo->dimm_params, + timing_params, ndimm); + + /* STEP 4: Gather configuration requirements from user */ + populate_memctl_options(timing_params->all_DIMMs_registered, + &pinfo->memctl_opts, + pinfo->dimm_params); + + /* STEP 5: Assign addresses to chip selects */ + total_mem = step_assign_addresses(pinfo, dbw_capacity_adjust); + + /* STEP 6: compute controller register values */ + if (timing_params->ndimms_present == 0) + memset(ddr_reg, 0, sizeof(struct fsl_ddr_cfg_regs_s)); + + compute_fsl_memctl_config_regs(&pinfo->memctl_opts, + ddr_reg, timing_params, + pinfo->dimm_params, + dbw_capacity_adjust); + + max_end = retrieve_max_size(ddr_reg, ncs); + total_mem = 1 + (((uint64_t)max_end << 24ULL) | 0xFFFFFFULL); + + return total_mem; +} + +/* + * fsl_ddr_sdram(): + * This is the main function to initialize the memory. + * + * It returns amount of memory configured in bytes. + */ +phys_size_t fsl_ddr_sdram(void) +{ + uint64_t total_memory; + struct fsl_ddr_info_s info; + + memset(&info, 0, sizeof(struct fsl_ddr_info_s)); + /* Gather board information on the memory controller and I2C bus. */ + fsl_ddr_board_info(&info.board_info); + + total_memory = fsl_ddr_compute(&info); + + if (info.common_timing_params.ndimms_present == 0) + return 0; + + fsl_ddr_set_memctl_regs(&info); + fsl_ddr_set_lawbar(&info.common_timing_params, LAW_TRGT_IF_DDR_1); + + return total_memory; +} -- 1.7.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox