mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Teresa Gámez" <t.gamez@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH] AM33xx: Make OSC frequency board depended
Date: Tue, 20 Aug 2013 14:10:04 +0200	[thread overview]
Message-ID: <1377000604-26071-1-git-send-email-t.gamez@phytec.de> (raw)

The oscillator frequency varies on different AM33xx boards.
Pass the osc frequency from lowlevel board code
to set the correct one on every board.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
---
 arch/arm/boards/beaglebone/lowlevel.c          |    2 +-
 arch/arm/boards/pcm051/lowlevel.c              |    2 +-
 arch/arm/mach-omap/am33xx_clock.c              |   26 ++++++++++++------------
 arch/arm/mach-omap/include/mach/am33xx-clock.h |    8 +------
 4 files changed, 16 insertions(+), 22 deletions(-)

diff --git a/arch/arm/boards/beaglebone/lowlevel.c b/arch/arm/boards/beaglebone/lowlevel.c
index d871ca1..2f3b3df 100644
--- a/arch/arm/boards/beaglebone/lowlevel.c
+++ b/arch/arm/boards/beaglebone/lowlevel.c
@@ -198,7 +198,7 @@ void beaglebone_sram_init(void)
 	u32 regVal, uart_base;
 
 	/* Setup the PLLs and the clocks for the peripherals */
-	pll_init(MPUPLL_M_500);
+	pll_init(MPUPLL_M_500, 24);
 
 	beaglebone_config_ddr();
 
diff --git a/arch/arm/boards/pcm051/lowlevel.c b/arch/arm/boards/pcm051/lowlevel.c
index f4a1742..dd06c6a 100644
--- a/arch/arm/boards/pcm051/lowlevel.c
+++ b/arch/arm/boards/pcm051/lowlevel.c
@@ -159,7 +159,7 @@ void pcm051_sram_init(void)
 	u32 regVal, uart_base;
 
 	/* Setup the PLLs and the clocks for the peripherals */
-	pll_init(MPUPLL_M_600);
+	pll_init(MPUPLL_M_600, 25);
 
 	pcm051_config_ddr();
 
diff --git a/arch/arm/mach-omap/am33xx_clock.c b/arch/arm/mach-omap/am33xx_clock.c
index 9928e9f..c6cae42 100644
--- a/arch/arm/mach-omap/am33xx_clock.c
+++ b/arch/arm/mach-omap/am33xx_clock.c
@@ -156,7 +156,7 @@ static void per_clocks_enable(void)
 	while (__raw_readl(CM_PER_SPI1_CLKCTRL) != PRCM_MOD_EN);
 }
 
-static void mpu_pll_config(int mpupll_M)
+static void mpu_pll_config(int mpupll_M, int osc)
 {
 	u32 clkmode, clksel, div_m2;
 
@@ -170,7 +170,7 @@ static void mpu_pll_config(int mpupll_M)
 	while(__raw_readl(CM_IDLEST_DPLL_MPU) != 0x00000100);
 
 	clksel = clksel & (~0x7ffff);
-	clksel = clksel | ((mpupll_M << 0x8) | MPUPLL_N);
+	clksel = clksel | ((mpupll_M << 0x8) | (osc - 1));
 	__raw_writel(clksel, CM_CLKSEL_DPLL_MPU);
 
 	div_m2 = div_m2 & ~0x1f;
@@ -183,7 +183,7 @@ static void mpu_pll_config(int mpupll_M)
 	while(__raw_readl(CM_IDLEST_DPLL_MPU) != 0x1);
 }
 
-static void core_pll_config(void)
+static void core_pll_config(int osc)
 {
 	u32 clkmode, clksel, div_m4, div_m5, div_m6;
 
@@ -199,7 +199,7 @@ static void core_pll_config(void)
 	while(__raw_readl(CM_IDLEST_DPLL_CORE) != 0x00000100);
 
 	clksel = clksel & (~0x7ffff);
-	clksel = clksel | ((COREPLL_M << 0x8) | COREPLL_N);
+	clksel = clksel | ((COREPLL_M << 0x8) | (osc - 1));
 	__raw_writel(clksel, CM_CLKSEL_DPLL_CORE);
 
 	div_m4 = div_m4 & ~0x1f;
@@ -221,7 +221,7 @@ static void core_pll_config(void)
 	while(__raw_readl(CM_IDLEST_DPLL_CORE) != 0x1);
 }
 
-static void per_pll_config(void)
+static void per_pll_config(int osc)
 {
 	u32 clkmode, clksel, div_m2;
 
@@ -235,7 +235,7 @@ static void per_pll_config(void)
 	while(__raw_readl(CM_IDLEST_DPLL_PER) != 0x00000100);
 
 	clksel = clksel & (~0x7ffff);
-	clksel = clksel | ((PERPLL_M << 0x8) | PERPLL_N);
+	clksel = clksel | ((PERPLL_M << 0x8) | (osc - 1));
 	__raw_writel(clksel, CM_CLKSEL_DPLL_PER);
 
 	div_m2 = div_m2 & ~0x7f;
@@ -248,7 +248,7 @@ static void per_pll_config(void)
 	while(__raw_readl(CM_IDLEST_DPLL_PER) != 0x1);
 }
 
-static void ddr_pll_config(void)
+static void ddr_pll_config(int osc)
 {
 	u32 clkmode, clksel, div_m2;
 
@@ -263,7 +263,7 @@ static void ddr_pll_config(void)
 	while ((__raw_readl(CM_IDLEST_DPLL_DDR) & 0x00000100) != 0x00000100);
 
 	clksel = clksel & (~0x7ffff);
-	clksel = clksel | ((DDRPLL_M << 0x8) | DDRPLL_N);
+	clksel = clksel | ((DDRPLL_M << 0x8) | (osc - 1));
 	__raw_writel(clksel, CM_CLKSEL_DPLL_DDR);
 
 	div_m2 = div_m2 & 0xFFFFFFE0;
@@ -294,12 +294,12 @@ void enable_ddr_clocks(void)
 /*
  * Configure the PLL/PRCM for necessary peripherals
  */
-void pll_init(int mpupll_M)
+void pll_init(int mpupll_M, int osc)
 {
-	mpu_pll_config(mpupll_M);
-	core_pll_config();
-	per_pll_config();
-	ddr_pll_config();
+	mpu_pll_config(mpupll_M, osc);
+	core_pll_config(osc);
+	per_pll_config(osc);
+	ddr_pll_config(osc);
 	/* Enable the required interconnect clocks */
 	interface_clocks_enable();
 	/* Enable power domain transition */
diff --git a/arch/arm/mach-omap/include/mach/am33xx-clock.h b/arch/arm/mach-omap/include/mach/am33xx-clock.h
index 968509e..6035da6 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-clock.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-clock.h
@@ -23,20 +23,16 @@
 
 /* Put the pll config values over here */
 
-#define OSC	24
-
 /* MAIN PLL Fdll = 1 GHZ, */
 #define MPUPLL_M_500	500	/* 125 * n */
 #define MPUPLL_M_550	550	/* 125 * n */
 #define MPUPLL_M_600	600	/* 125 * n */
 #define MPUPLL_M_720	720	/* 125 * n */
 
-#define MPUPLL_N	(OSC - 1)
 #define MPUPLL_M2	1
 
 /* Core PLL Fdll = 1 GHZ, */
 #define COREPLL_M	1000	/* 125 * n */
-#define COREPLL_N	(OSC - 1)
 
 #define COREPLL_M4	10	/* CORE_CLKOUTM4 = 200 MHZ */
 #define COREPLL_M5	8	/* CORE_CLKOUTM5 = 250 MHZ */
@@ -48,13 +44,11 @@
  * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below
  */
 #define PERPLL_M	960
-#define PERPLL_N	(OSC - 1)
 #define PERPLL_M2	5
 
 /* DDR Freq is 266 MHZ for now*/
 /* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */
 #define DDRPLL_M	266
-#define DDRPLL_N	(OSC - 1)
 #define DDRPLL_M2	1
 
 /* PRCM */
@@ -187,7 +181,7 @@
 
 #define CM_ALWON_GPMC_CLKCTRL           CM_PER_GPMC_CLKCTRL
 
-extern void pll_init(int mpupll_M);
+extern void pll_init(int mpupll_M, int osc);
 extern void enable_ddr_clocks(void);
 
 #endif  /* endif _AM33XX_CLOCKS_H_ */
-- 
1.7.0.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2013-08-20 12:10 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-20 12:10 Teresa Gámez [this message]
2013-08-20 13:27 ` Jan Lübbe
2013-08-22  7:04 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1377000604-26071-1-git-send-email-t.gamez@phytec.de \
    --to=t.gamez@phytec.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox