* [PATCH 01/22] console: fix console without CONFIG_PARAMETER
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 02/22] mci: omap: advertise 8 bit support Sascha Hauer
` (20 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
From: Jan Luebbe <jlu@pengutronix.de>
If CONFIG_PARAMETER is not set, dev_set_param() does not call the setter
function. Call it directly instead in this case.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
common/console.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/common/console.c b/common/console.c
index 402dcf5..1518ed8 100644
--- a/common/console.c
+++ b/common/console.c
@@ -171,8 +171,12 @@ int console_register(struct console_device *newcdev)
list_add_tail(&newcdev->list, &console_list);
- if (activate)
- dev_set_param(dev, "active", "ioe");
+ if (activate) {
+ if (IS_ENABLED(CONFIG_PARAMETER))
+ dev_set_param(dev, "active", "ioe");
+ else
+ console_std_set(dev, NULL, "ioe");
+ }
return 0;
}
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 02/22] mci: omap: advertise 8 bit support
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
2013-08-26 6:55 ` [PATCH 01/22] console: fix console without CONFIG_PARAMETER Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 03/22] mci: omap: implement device detect callback Sascha Hauer
` (19 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
The driver is already capable of 8 bit buswidth support, so advertise
it to actually make use of it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/mci/omap_hsmmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mci/omap_hsmmc.c b/drivers/mci/omap_hsmmc.c
index 62c79e1..014cb47 100644
--- a/drivers/mci/omap_hsmmc.c
+++ b/drivers/mci/omap_hsmmc.c
@@ -593,7 +593,7 @@ static int omap_mmc_probe(struct device_d *dev)
hsmmc->mci.set_ios = mmc_set_ios;
hsmmc->mci.init = mmc_init_setup;
hsmmc->mci.host_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_MMC_HIGHSPEED;
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_8_BIT_DATA;
hsmmc->mci.hw_dev = dev;
hsmmc->iobase = dev_request_mem_region(dev, 0);
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 03/22] mci: omap: implement device detect callback
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
2013-08-26 6:55 ` [PATCH 01/22] console: fix console without CONFIG_PARAMETER Sascha Hauer
2013-08-26 6:55 ` [PATCH 02/22] mci: omap: advertise 8 bit support Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 04/22] mci: omap: Allow to set mmc devname via platformdata Sascha Hauer
` (18 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/mci/omap_hsmmc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mci/omap_hsmmc.c b/drivers/mci/omap_hsmmc.c
index 014cb47..bb976e1 100644
--- a/drivers/mci/omap_hsmmc.c
+++ b/drivers/mci/omap_hsmmc.c
@@ -574,6 +574,13 @@ static void mmc_set_ios(struct mci_host *mci, struct mci_ios *ios)
writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
}
+static int omap_mmc_detect(struct device_d *dev)
+{
+ struct omap_hsmmc *hsmmc = dev->priv;
+
+ return mci_detect_card(&hsmmc->mci);
+}
+
static int omap_mmc_probe(struct device_d *dev)
{
struct omap_hsmmc *hsmmc;
@@ -609,6 +616,9 @@ static int omap_mmc_probe(struct device_d *dev)
else
hsmmc->mci.f_max = 52000000;
+ dev->priv = hsmmc;
+ dev->detect = omap_mmc_detect,
+
mci_register(&hsmmc->mci);
return 0;
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 04/22] mci: omap: Allow to set mmc devname via platformdata
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (2 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 03/22] mci: omap: implement device detect callback Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 05/22] ARM: omap: Allow to set mmc devname used for booting Sascha Hauer
` (17 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
To be able to get persistent names for the sd/mmc devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/omap_hsmmc.h | 1 +
drivers/mci/omap_hsmmc.c | 14 ++++++++++----
2 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap/include/mach/omap_hsmmc.h b/arch/arm/mach-omap/include/mach/omap_hsmmc.h
index 2055ccc..19942df 100644
--- a/arch/arm/mach-omap/include/mach/omap_hsmmc.h
+++ b/arch/arm/mach-omap/include/mach/omap_hsmmc.h
@@ -21,5 +21,6 @@
/** omapmmc platform data structure */
struct omap_hsmmc_platform_data {
unsigned f_max; /* host interface upper limit */
+ char *devname; /* The mci device name, optional */
};
#endif /* __ASM_OMAP_HSMMC_H */
diff --git a/drivers/mci/omap_hsmmc.c b/drivers/mci/omap_hsmmc.c
index bb976e1..a2cd3fe 100644
--- a/drivers/mci/omap_hsmmc.c
+++ b/drivers/mci/omap_hsmmc.c
@@ -611,10 +611,16 @@ static int omap_mmc_probe(struct device_d *dev)
hsmmc->mci.f_min = 400000;
pdata = (struct omap_hsmmc_platform_data *)dev->platform_data;
- if (pdata && pdata->f_max)
- hsmmc->mci.f_max = pdata->f_max;
- else
- hsmmc->mci.f_max = 52000000;
+ if (pdata) {
+ if (pdata->f_max)
+ hsmmc->mci.f_max = pdata->f_max;
+ else
+ hsmmc->mci.f_max = 52000000;
+
+ if (pdata->devname)
+ hsmmc->mci.devname = pdata->devname;
+ }
+
dev->priv = hsmmc;
dev->detect = omap_mmc_detect,
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 05/22] ARM: omap: Allow to set mmc devname used for booting
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (3 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 04/22] mci: omap: Allow to set mmc devname via platformdata Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 06/22] ARM: omap: fix omap_save_bootinfo Sascha Hauer
` (16 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
This adds a omap_set_bootmmc_devname function which can be used
to specify the MMC boot device. In an xload configuration this
is then used to load the next stage. In a regular build this is
used to mount /boot.
Also a device_detect_by_name is added to allow to disable probing
for sd/mmc cards during startup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/generic.h | 8 ++++++++
arch/arm/mach-omap/omap_generic.c | 31 ++++++++++++++++++++++++++++---
arch/arm/mach-omap/xload.c | 19 ++++++++++++++++---
3 files changed, 52 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap/include/mach/generic.h b/arch/arm/mach-omap/include/mach/generic.h
index 3314faf..ee711ee 100644
--- a/arch/arm/mach-omap/include/mach/generic.h
+++ b/arch/arm/mach-omap/include/mach/generic.h
@@ -42,14 +42,22 @@ struct omap_barebox_part {
#ifdef CONFIG_SHELL_NONE
int omap_set_barebox_part(struct omap_barebox_part *part);
+int omap_set_mmc_dev(const char *mmcdev);
#else
static inline int omap_set_barebox_part(struct omap_barebox_part *part)
{
return 0;
}
+static inline int omap_set_mmc_dev(const char *mmcdev)
+{
+ return 0;
+}
#endif
extern uint32_t omap_bootinfo[3];
void omap_save_bootinfo(void);
+void omap_set_bootmmc_devname(const char *devname);
+const char *omap_get_bootmmc_devname(void);
+
#endif
diff --git a/arch/arm/mach-omap/omap_generic.c b/arch/arm/mach-omap/omap_generic.c
index cfd3dec..e7ca821 100644
--- a/arch/arm/mach-omap/omap_generic.c
+++ b/arch/arm/mach-omap/omap_generic.c
@@ -18,19 +18,44 @@
#include <init.h>
#include <io.h>
#include <fs.h>
+#include <malloc.h>
#include <linux/stat.h>
-#if defined(CONFIG_DEFAULT_ENVIRONMENT) && defined(CONFIG_MCI_STARTUP)
+static char *omap_bootmmc_dev;
+
+void omap_set_bootmmc_devname(char *devname)
+{
+ omap_bootmmc_dev = devname;
+}
+
+const char *omap_get_bootmmc_devname(void)
+{
+ return omap_bootmmc_dev;
+}
+
+#if defined(CONFIG_DEFAULT_ENVIRONMENT)
static int omap_env_init(void)
{
struct stat s;
- char *diskdev = "/dev/disk0.0";
+ char *diskdev, *partname;
int ret;
if (bootsource_get() != BOOTSOURCE_MMC)
return 0;
- ret = stat(diskdev, &s);
+ if (omap_bootmmc_dev)
+ diskdev = omap_bootmmc_dev;
+ else
+ diskdev = "disk0";
+
+ device_detect_by_name(diskdev);
+
+ partname = asprintf("/dev/%s.0", diskdev);
+
+ ret = stat(partname, &s);
+
+ free(partname);
+
if (ret) {
printf("no %s. using default env\n", diskdev);
return 0;
diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
index 76746e2..b4d1b55 100644
--- a/arch/arm/mach-omap/xload.c
+++ b/arch/arm/mach-omap/xload.c
@@ -8,6 +8,7 @@
#include <fs.h>
#include <fcntl.h>
#include <sizes.h>
+#include <malloc.h>
#include <filetype.h>
#include <mach/generic.h>
@@ -98,11 +99,23 @@ static void *omap_xload_boot_mmc(void)
int ret;
void *buf;
int len;
- const char *diskdev = "disk0.0";
+ const char *diskdev;
+ char *partname;
+
+ diskdev = omap_get_bootmmc_devname();
+ if (!diskdev)
+ diskdev = "disk0";
+
+ device_detect_by_name(diskdev);
+
+ partname = asprintf("%s.0", diskdev);
+
+ ret = mount(partname, "fat", "/");
+
+ free(partname);
- ret = mount(diskdev, "fat", "/");
if (ret) {
- printf("Unable to mount %s (%d)\n", diskdev, ret);
+ printf("Unable to mount %s (%d)\n", partname, ret);
return NULL;
}
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 06/22] ARM: omap: fix omap_save_bootinfo
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (4 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 05/22] ARM: omap: Allow to set mmc devname used for booting Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 12:00 ` Teresa Gamez
2013-08-26 6:55 ` [PATCH 07/22] ARM: omap: rename INIT_LL to omap_uart_lowlevel_init Sascha Hauer
` (15 subsequent siblings)
21 siblings, 1 reply; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
omap_save_bootinfo derefences the argument passed to barebox without
checking it for validity. This breaks 2nd stage booting where r0
is undefined. The best we can do is to check whether the pointer is
somewhere in SRAM and is word aligned. This at least makes sure that
we do not oops. This introduces SoC specific xxx_save_bootinfo variants
since the SRAM addresses/sizes differ between SoCs.
Additionally fix the prototype for omap_save_bootinfo. It uses r0, so
it must be passed this variable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/archosg9/lowlevel.c | 3 ++-
arch/arm/boards/beagle/lowlevel.c | 3 ++-
arch/arm/boards/beaglebone/lowlevel.c | 3 ++-
arch/arm/boards/omap343xdsp/lowlevel.c | 3 ++-
arch/arm/boards/omap3evm/lowlevel.c | 3 ++-
arch/arm/boards/panda/lowlevel.c | 3 ++-
arch/arm/boards/pcm049/lowlevel.c | 3 ++-
arch/arm/boards/pcm051/lowlevel.c | 2 +-
arch/arm/boards/phycard-a-l1/lowlevel.c | 3 ++-
arch/arm/boards/phycard-a-xl2/lowlevel.c | 3 ++-
arch/arm/mach-omap/include/mach/am33xx-generic.h | 17 +++++++++++++++++
arch/arm/mach-omap/include/mach/am33xx-silicon.h | 7 ++++---
arch/arm/mach-omap/include/mach/generic.h | 2 +-
arch/arm/mach-omap/include/mach/omap3-generic.h | 21 +++++++++++++++++++++
arch/arm/mach-omap/include/mach/omap4-generic.h | 21 +++++++++++++++++++++
15 files changed, 83 insertions(+), 14 deletions(-)
create mode 100644 arch/arm/mach-omap/include/mach/omap3-generic.h
create mode 100644 arch/arm/mach-omap/include/mach/omap4-generic.h
diff --git a/arch/arm/boards/archosg9/lowlevel.c b/arch/arm/boards/archosg9/lowlevel.c
index 8be345b..6c93992 100644
--- a/arch/arm/boards/archosg9/lowlevel.c
+++ b/arch/arm/boards/archosg9/lowlevel.c
@@ -17,6 +17,7 @@
#include <mach/generic.h>
#include <mach/omap4-mux.h>
#include <mach/omap4-silicon.h>
+#include <mach/omap4-generic.h>
#include <mach/omap4-clock.h>
#include <mach/syslib.h>
#include <asm/barebox-arm.h>
@@ -67,7 +68,7 @@ static noinline void archosg9_init_lowlevel(void)
void __naked __bare_init barebox_arm_reset_vector(uint32_t *data)
{
- omap_save_bootinfo();
+ omap4_save_bootinfo(data);
arm_cpu_lowlevel_init();
diff --git a/arch/arm/boards/beagle/lowlevel.c b/arch/arm/boards/beagle/lowlevel.c
index ef7e3c0..ad46386 100644
--- a/arch/arm/boards/beagle/lowlevel.c
+++ b/arch/arm/boards/beagle/lowlevel.c
@@ -6,6 +6,7 @@
#include <mach/control.h>
#include <mach/generic.h>
#include <mach/omap3-silicon.h>
+#include <mach/omap3-generic.h>
#include <mach/omap3-mux.h>
#include <mach/sdrc.h>
#include <mach/syslib.h>
@@ -182,7 +183,7 @@ static int beagle_board_init(void)
void __naked __bare_init barebox_arm_reset_vector(uint32_t *data)
{
- omap_save_bootinfo();
+ omap3_save_bootinfo(data);
arm_cpu_lowlevel_init();
diff --git a/arch/arm/boards/beaglebone/lowlevel.c b/arch/arm/boards/beaglebone/lowlevel.c
index 2f3b3df..be775a8 100644
--- a/arch/arm/boards/beaglebone/lowlevel.c
+++ b/arch/arm/boards/beaglebone/lowlevel.c
@@ -10,6 +10,7 @@
#include <mach/sys_info.h>
#include <mach/syslib.h>
#include <mach/am33xx-mux.h>
+#include <mach/am33xx-generic.h>
#include <mach/wdt.h>
/* UART Defines */
@@ -251,7 +252,7 @@ static int beaglebone_board_init(void)
void __bare_init __naked barebox_arm_reset_vector(uint32_t *data)
{
- omap_save_bootinfo();
+ am33xx_save_bootinfo(data);
arm_cpu_lowlevel_init();
diff --git a/arch/arm/boards/omap343xdsp/lowlevel.c b/arch/arm/boards/omap343xdsp/lowlevel.c
index 61b7f99..fcb9571 100644
--- a/arch/arm/boards/omap343xdsp/lowlevel.c
+++ b/arch/arm/boards/omap343xdsp/lowlevel.c
@@ -10,6 +10,7 @@
#include <mach/control.h>
#include <mach/syslib.h>
#include <mach/omap3-silicon.h>
+#include <mach/omap3-generic.h>
#include <mach/sys_info.h>
/**
@@ -549,7 +550,7 @@ static int sdp343x_board_init(void)
void __naked __bare_init barebox_arm_reset_vector(uint32_t *data)
{
- omap_save_bootinfo();
+ omap3_save_bootinfo(data);
arm_cpu_lowlevel_init();
diff --git a/arch/arm/boards/omap3evm/lowlevel.c b/arch/arm/boards/omap3evm/lowlevel.c
index ea92835..98f1476 100644
--- a/arch/arm/boards/omap3evm/lowlevel.c
+++ b/arch/arm/boards/omap3evm/lowlevel.c
@@ -9,6 +9,7 @@
#include <mach/control.h>
#include <mach/syslib.h>
#include <mach/omap3-silicon.h>
+#include <mach/omap3-generic.h>
#include <mach/sys_info.h>
@@ -162,7 +163,7 @@ static int omap3_evm_board_init(void)
void __naked __bare_init barebox_arm_reset_vector(uint32_t *data)
{
- omap_save_bootinfo();
+ omap3_save_bootinfo(data);
arm_cpu_lowlevel_init();
diff --git a/arch/arm/boards/panda/lowlevel.c b/arch/arm/boards/panda/lowlevel.c
index a21d559..205aaaf 100644
--- a/arch/arm/boards/panda/lowlevel.c
+++ b/arch/arm/boards/panda/lowlevel.c
@@ -23,6 +23,7 @@
#include <mach/generic.h>
#include <mach/omap4-mux.h>
#include <mach/omap4-silicon.h>
+#include <mach/omap4-generic.h>
#include <mach/omap4-clock.h>
#include <mach/syslib.h>
#include <asm/barebox-arm.h>
@@ -80,7 +81,7 @@ static void noinline panda_init_lowlevel(void)
void __bare_init __naked barebox_arm_reset_vector(uint32_t *data)
{
- omap_save_bootinfo();
+ omap4_save_bootinfo(data);
arm_cpu_lowlevel_init();
diff --git a/arch/arm/boards/pcm049/lowlevel.c b/arch/arm/boards/pcm049/lowlevel.c
index 07cc1d7..4f39600 100644
--- a/arch/arm/boards/pcm049/lowlevel.c
+++ b/arch/arm/boards/pcm049/lowlevel.c
@@ -23,6 +23,7 @@
#include <mach/generic.h>
#include <mach/omap4-mux.h>
#include <mach/omap4-silicon.h>
+#include <mach/omap4-generic.h>
#include <mach/omap4-clock.h>
#include <mach/syslib.h>
#include <asm/barebox-arm.h>
@@ -110,7 +111,7 @@ static void noinline pcm049_init_lowlevel(void)
void __bare_init __naked barebox_arm_reset_vector(uint32_t *data)
{
- omap_save_bootinfo();
+ omap4_save_bootinfo(data);
arm_cpu_lowlevel_init();
diff --git a/arch/arm/boards/pcm051/lowlevel.c b/arch/arm/boards/pcm051/lowlevel.c
index dd06c6a..3a637cf 100644
--- a/arch/arm/boards/pcm051/lowlevel.c
+++ b/arch/arm/boards/pcm051/lowlevel.c
@@ -210,7 +210,7 @@ static int pcm051_board_init(void)
void __naked __bare_init barebox_arm_reset_vector(uint32_t *data)
{
- omap_save_bootinfo();
+ am33xx_save_bootinfo(data);
arm_cpu_lowlevel_init();
diff --git a/arch/arm/boards/phycard-a-l1/lowlevel.c b/arch/arm/boards/phycard-a-l1/lowlevel.c
index 7855040..353b58f 100644
--- a/arch/arm/boards/phycard-a-l1/lowlevel.c
+++ b/arch/arm/boards/phycard-a-l1/lowlevel.c
@@ -10,6 +10,7 @@
#include <mach/control.h>
#include <mach/syslib.h>
#include <mach/omap3-silicon.h>
+#include <mach/omap3-generic.h>
#include <mach/sys_info.h>
/* Slower full frequency range default timings for x32 operation */
@@ -253,7 +254,7 @@ static int pcaal1_board_init(void)
void __bare_init __naked barebox_arm_reset_vector(uint32_t *data)
{
- omap_save_bootinfo();
+ omap3_save_bootinfo(data);
arm_cpu_lowlevel_init();
diff --git a/arch/arm/boards/phycard-a-xl2/lowlevel.c b/arch/arm/boards/phycard-a-xl2/lowlevel.c
index 9a794b7..1ddf8a0 100644
--- a/arch/arm/boards/phycard-a-xl2/lowlevel.c
+++ b/arch/arm/boards/phycard-a-xl2/lowlevel.c
@@ -23,6 +23,7 @@
#include <mach/generic.h>
#include <mach/omap4-mux.h>
#include <mach/omap4-silicon.h>
+#include <mach/omap4-generic.h>
#include <mach/omap4-clock.h>
#include <mach/syslib.h>
#include <asm/barebox-arm.h>
@@ -90,7 +91,7 @@ static noinline void pcaaxl2_init_lowlevel(void)
void __bare_init __naked barebox_arm_reset_vector(uint32_t *data)
{
- omap_save_bootinfo();
+ omap4_save_bootinfo(data);
arm_cpu_lowlevel_init();
diff --git a/arch/arm/mach-omap/include/mach/am33xx-generic.h b/arch/arm/mach-omap/include/mach/am33xx-generic.h
index ba69caf..d9d2efb 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-generic.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-generic.h
@@ -1,6 +1,23 @@
#ifndef __MACH_AM33XX_GENERIC_H
#define __MACH_AM33XX_GENERIC_H
+#include <mach/generic.h>
+#include <mach/am33xx-silicon.h>
+
int am33xx_register_ethaddr(int eth_id, int mac_id);
+static inline void am33xx_save_bootinfo(uint32_t *info)
+{
+ unsigned long i = (unsigned long)info;
+
+ if (i & 0x3)
+ return;
+ if (i < AM33XX_SRAM0_START)
+ return;
+ if (i > AM33XX_SRAM0_START + AM33XX_SRAM0_SIZE)
+ return;
+
+ omap_save_bootinfo(info);
+}
+
#endif /* __MACH_AM33XX_GENERIC_H */
diff --git a/arch/arm/mach-omap/include/mach/am33xx-silicon.h b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
index bd55da4..e8ecd1e 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-silicon.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
@@ -17,6 +17,8 @@
#ifndef __ASM_ARCH_AM33XX_H
#define __ASM_ARCH_AM33XX_H
+#include <sizes.h>
+
/** AM335x Internal Bus Base addresses */
#define AM33XX_L4_WKUP_BASE 0x44C00000
#define AM33XX_L4_PER_BASE 0x48000000
@@ -115,11 +117,10 @@
#define AM33XX_VTP1_CTRL_REG 0x48140E10
/* OCMC */
-#define AM33XX_SRAM0_SIZE (0x1B400) /* 109 KB */
+#define AM33XX_SRAM0_START 0x402f0400
+#define AM33XX_SRAM0_SIZE (SZ_128K - SZ_1K)
#define AM33XX_SRAM_GPMC_STACK_SIZE (0x40)
-#define AM33XX_LOW_LEVEL_SRAM_STACK (AM33XX_SRAM0_START + AM33XX_SRAM0_SIZE - 4)
-
/* DDR offsets */
#define AM33XX_DDR_PHY_BASE_ADDR 0x44E12000
#define AM33XX_DDR_IO_CTRL 0x44E10E04
diff --git a/arch/arm/mach-omap/include/mach/generic.h b/arch/arm/mach-omap/include/mach/generic.h
index ee711ee..ece8c2b 100644
--- a/arch/arm/mach-omap/include/mach/generic.h
+++ b/arch/arm/mach-omap/include/mach/generic.h
@@ -55,7 +55,7 @@ static inline int omap_set_mmc_dev(const char *mmcdev)
#endif
extern uint32_t omap_bootinfo[3];
-void omap_save_bootinfo(void);
+void omap_save_bootinfo(void *data);
void omap_set_bootmmc_devname(const char *devname);
const char *omap_get_bootmmc_devname(void);
diff --git a/arch/arm/mach-omap/include/mach/omap3-generic.h b/arch/arm/mach-omap/include/mach/omap3-generic.h
new file mode 100644
index 0000000..7f0da4e
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/omap3-generic.h
@@ -0,0 +1,21 @@
+#ifndef __MACH_OMAP3_GENERIC_H
+#define __MACH_OMAP3_GENERIC_H
+
+#include <mach/generic.h>
+#include <mach/omap3-silicon.h>
+
+static inline void omap3_save_bootinfo(uint32_t *info)
+{
+ unsigned long i = (unsigned long)info;
+
+ if (i & 0x3)
+ return;
+ if (i < OMAP3_SRAM_BASE)
+ return;
+ if (i > OMAP3_SRAM_BASE + SZ_64K)
+ return;
+
+ omap_save_bootinfo(info);
+}
+
+#endif /* __MACH_OMAP3_GENERIC_H */
diff --git a/arch/arm/mach-omap/include/mach/omap4-generic.h b/arch/arm/mach-omap/include/mach/omap4-generic.h
new file mode 100644
index 0000000..44f5a12
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/omap4-generic.h
@@ -0,0 +1,21 @@
+#ifndef __MACH_OMAP4_GENERIC_H
+#define __MACH_OMAP4_GENERIC_H
+
+#include <mach/generic.h>
+#include <mach/omap4-silicon.h>
+
+static inline void omap4_save_bootinfo(uint32_t *info)
+{
+ unsigned long i = (unsigned long)info;
+
+ if (i & 0x3)
+ return;
+ if (i < OMAP44XX_SRAM_BASE)
+ return;
+ if (i > OMAP44XX_SRAM_BASE + SZ_64K)
+ return;
+
+ omap_save_bootinfo(info);
+}
+
+#endif /* __MACH_OMAP4_GENERIC_H */
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [PATCH 06/22] ARM: omap: fix omap_save_bootinfo
2013-08-26 6:55 ` [PATCH 06/22] ARM: omap: fix omap_save_bootinfo Sascha Hauer
@ 2013-08-26 12:00 ` Teresa Gamez
0 siblings, 0 replies; 24+ messages in thread
From: Teresa Gamez @ 2013-08-26 12:00 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
Hello Sascha,
Am 26.08.2013 08:55, schrieb Sascha Hauer:
>
> diff --git a/arch/arm/boards/pcm049/lowlevel.c b/arch/arm/boards/pcm049/lowlevel.c
> index 07cc1d7..4f39600 100644
> --- a/arch/arm/boards/pcm049/lowlevel.c
> +++ b/arch/arm/boards/pcm049/lowlevel.c
> @@ -23,6 +23,7 @@
> #include <mach/generic.h>
> #include <mach/omap4-mux.h>
> #include <mach/omap4-silicon.h>
> +#include <mach/omap4-generic.h>
> #include <mach/omap4-clock.h>
> #include <mach/syslib.h>
> #include <asm/barebox-arm.h>
> @@ -110,7 +111,7 @@ static void noinline pcm049_init_lowlevel(void)
>
> void __bare_init __naked barebox_arm_reset_vector(uint32_t *data)
> {
> - omap_save_bootinfo();
> + omap4_save_bootinfo(data);
>
> arm_cpu_lowlevel_init();
>
> diff --git a/arch/arm/boards/pcm051/lowlevel.c b/arch/arm/boards/pcm051/lowlevel.c
> index dd06c6a..3a637cf 100644
> --- a/arch/arm/boards/pcm051/lowlevel.c
> +++ b/arch/arm/boards/pcm051/lowlevel.c
> @@ -210,7 +210,7 @@ static int pcm051_board_init(void)
the <mach/am33xx-generic.h> include is missing here.
Teresa
>
> void __naked __bare_init barebox_arm_reset_vector(uint32_t *data)
> {
> - omap_save_bootinfo();
> + am33xx_save_bootinfo(data);
>
> arm_cpu_lowlevel_init();
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 07/22] ARM: omap: rename INIT_LL to omap_uart_lowlevel_init
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (5 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 06/22] ARM: omap: fix omap_save_bootinfo Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 08/22] ARM: am33xx: Cleanup of lowlevel code Sascha Hauer
` (14 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
Function should use lower case letters. Also give this function
more namespace. While at it include io.h rather than asm/io.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/debug_ll.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap/include/mach/debug_ll.h b/arch/arm/mach-omap/include/mach/debug_ll.h
index 38ca562..2917558 100644
--- a/arch/arm/mach-omap/include/mach/debug_ll.h
+++ b/arch/arm/mach-omap/include/mach/debug_ll.h
@@ -17,7 +17,7 @@
#ifndef __MACH_DEBUG_LL_H__
#define __MACH_DEBUG_LL_H__
-#include <asm/io.h>
+#include <io.h>
#ifdef CONFIG_ARCH_OMAP3
#include <mach/omap3-silicon.h>
@@ -56,7 +56,7 @@
#define MCR (4 << 2)
#define MDR (8 << 2)
-static inline void INIT_LL(void)
+static inline void omap_uart_lowlevel_init(void)
{
writeb(0x00, UART_BASE + LCR);
writeb(0x00, UART_BASE + IER);
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 08/22] ARM: am33xx: Cleanup of lowlevel code
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (6 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 07/22] ARM: omap: rename INIT_LL to omap_uart_lowlevel_init Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 09/22] ARM: pcm051: Clean up " Sascha Hauer
` (13 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
From: Teresa Gámez <t.gamez@phytec.de>
There is a lot of duplicate lowlevel code between the
am33xx boards. Move this code to am33xx_generic and
create structs for sdram settings.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/am33xx_generic.c | 157 +++++++++++++++++++++++
arch/arm/mach-omap/include/mach/am33xx-silicon.h | 44 +++++++
2 files changed, 201 insertions(+)
diff --git a/arch/arm/mach-omap/am33xx_generic.c b/arch/arm/mach-omap/am33xx_generic.c
index a653ef7..c1e63cd 100644
--- a/arch/arm/mach-omap/am33xx_generic.c
+++ b/arch/arm/mach-omap/am33xx_generic.c
@@ -171,3 +171,160 @@ static int am33xx_gpio_init(void)
return 0;
}
coredevice_initcall(am33xx_gpio_init);
+
+/* UART Defines */
+#define UART_SYSCFG_OFFSET 0x54
+#define UART_SYSSTS_OFFSET 0x58
+
+#define UART_CLK_RUNNING_MASK 0x1
+#define UART_RESET (0x1 << 1)
+#define UART_SMART_IDLE_EN (0x1 << 0x3)
+
+void am33xx_uart0_soft_reset(void)
+{
+ int reg;
+
+ reg = readl(AM33XX_UART0_BASE + UART_SYSCFG_OFFSET);
+ reg |= UART_RESET;
+ writel(reg, (AM33XX_UART0_BASE + UART_SYSCFG_OFFSET));
+
+ while ((readl(AM33XX_UART0_BASE + UART_SYSSTS_OFFSET) &
+ UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+ ;
+
+ /* Disable smart idle */
+ reg = readl((AM33XX_UART0_BASE + UART_SYSCFG_OFFSET));
+ reg |= UART_SMART_IDLE_EN;
+ writel(reg, (AM33XX_UART0_BASE + UART_SYSCFG_OFFSET));
+}
+
+
+#define VTP_CTRL_READY (0x1 << 5)
+#define VTP_CTRL_ENABLE (0x1 << 6)
+#define VTP_CTRL_START_EN (0x1)
+
+void am33xx_config_vtp(void)
+{
+ uint32_t val;
+
+ val = readl(AM33XX_VTP0_CTRL_REG);
+ val |= VTP_CTRL_ENABLE;
+ writel(val, AM33XX_VTP0_CTRL_REG);
+
+ val = readl(AM33XX_VTP0_CTRL_REG);
+ val &= ~VTP_CTRL_START_EN;
+ writel(val, AM33XX_VTP0_CTRL_REG);
+
+ val = readl(AM33XX_VTP0_CTRL_REG);
+ val |= VTP_CTRL_START_EN;
+ writel(val, AM33XX_VTP0_CTRL_REG);
+
+ /* Poll for READY */
+ while ((readl(AM33XX_VTP0_CTRL_REG) &
+ VTP_CTRL_READY) != VTP_CTRL_READY)
+ ;
+}
+
+void am33xx_ddr_phydata_cmd_macro(const struct am33xx_cmd_control *cmd_ctrl)
+{
+ writel(cmd_ctrl->slave_ratio0, AM33XX_CMD0_CTRL_SLAVE_RATIO_0);
+ writel(cmd_ctrl->dll_lock_diff0, AM33XX_CMD0_DLL_LOCK_DIFF_0);
+ writel(cmd_ctrl->invert_clkout0, AM33XX_CMD0_INVERT_CLKOUT_0);
+
+ writel(cmd_ctrl->slave_ratio1, AM33XX_CMD1_CTRL_SLAVE_RATIO_0);
+ writel(cmd_ctrl->dll_lock_diff1, AM33XX_CMD1_DLL_LOCK_DIFF_0);
+ writel(cmd_ctrl->invert_clkout1, AM33XX_CMD1_INVERT_CLKOUT_0);
+
+ writel(cmd_ctrl->slave_ratio2, AM33XX_CMD2_CTRL_SLAVE_RATIO_0);
+ writel(cmd_ctrl->dll_lock_diff2, AM33XX_CMD2_DLL_LOCK_DIFF_0);
+ writel(cmd_ctrl->invert_clkout2, AM33XX_CMD2_INVERT_CLKOUT_0);
+}
+
+#define CM_EMIF_SDRAM_CONFIG (AM33XX_CTRL_BASE + 0x110)
+
+void am33xx_config_sdram(const struct am33xx_emif_regs *regs)
+{
+ writel(regs->emif_read_latency, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_1));
+ writel(regs->emif_read_latency, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_1_SHADOW));
+ writel(regs->emif_read_latency, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_2));
+ writel(regs->emif_tim1, AM33XX_EMIF4_0_REG(SDRAM_TIM_1));
+ writel(regs->emif_tim1, AM33XX_EMIF4_0_REG(SDRAM_TIM_1_SHADOW));
+ writel(regs->emif_tim2, AM33XX_EMIF4_0_REG(SDRAM_TIM_2));
+ writel(regs->emif_tim2, AM33XX_EMIF4_0_REG(SDRAM_TIM_2_SHADOW));
+ writel(regs->emif_tim3, AM33XX_EMIF4_0_REG(SDRAM_TIM_3));
+ writel(regs->emif_tim3, AM33XX_EMIF4_0_REG(SDRAM_TIM_3_SHADOW));
+
+ if (regs->zq_config) {
+ /*
+ * A value of 0x2800 for the REF CTRL will give us
+ * about 570us for a delay, which will be long enough
+ * to configure things.
+ */
+ writel(0x2800, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL));
+ writel(regs->zq_config, AM33XX_EMIF4_0_REG(ZQ_CONFIG));
+ writel(regs->sdram_config, CM_EMIF_SDRAM_CONFIG);
+ writel(regs->sdram_config, AM33XX_EMIF4_0_REG(SDRAM_CONFIG));
+ writel(regs->sdram_ref_ctrl,
+ AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL));
+ writel(regs->sdram_ref_ctrl,
+ AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL_SHADOW));
+
+ }
+
+ writel(regs->sdram_ref_ctrl, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL));
+ writel(regs->sdram_ref_ctrl, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL_SHADOW));
+ writel(regs->sdram_config, CM_EMIF_SDRAM_CONFIG);
+}
+
+void am33xx_config_io_ctrl(int ioctrl)
+{
+ writel(ioctrl, AM33XX_DDR_CMD0_IOCTRL);
+ writel(ioctrl, AM33XX_DDR_CMD1_IOCTRL);
+ writel(ioctrl, AM33XX_DDR_CMD2_IOCTRL);
+ writel(ioctrl, AM33XX_DDR_DATA0_IOCTRL);
+ writel(ioctrl, AM33XX_DDR_DATA1_IOCTRL);
+}
+
+void am33xx_config_ddr_data(const struct am33xx_ddr_data *data, int macronr)
+{
+ u32 base = 0x0;
+
+ if (macronr)
+ base = 0xA4;
+
+ writel(data->rd_slave_ratio0, AM33XX_DATA0_RD_DQS_SLAVE_RATIO_0 + base);
+ writel(data->wr_dqs_slave_ratio0, AM33XX_DATA0_WR_DQS_SLAVE_RATIO_0 + base);
+ writel(data->wrlvl_init_ratio0, AM33XX_DATA0_WRLVL_INIT_RATIO_0 + base);
+ writel(data->gatelvl_init_ratio0, AM33XX_DATA0_GATELVL_INIT_RATIO_0 + base);
+ writel(data->fifo_we_slave_ratio0, AM33XX_DATA0_FIFO_WE_SLAVE_RATIO_0 + base);
+ writel(data->wr_slave_ratio0, AM33XX_DATA0_WR_DATA_SLAVE_RATIO_0 + base);
+ writel(data->use_rank0_delay, AM33XX_DATA0_RANK0_DELAYS_0 + base);
+ writel(data->dll_lock_diff0, AM33XX_DATA0_DLL_LOCK_DIFF_0 + base);
+}
+
+void am335x_sdram_init(int ioctrl, const struct am33xx_cmd_control *cmd_ctrl,
+ const struct am33xx_emif_regs *emif_regs,
+ const struct am33xx_ddr_data *ddr_data)
+{
+ uint32_t val;
+
+ enable_ddr_clocks();
+
+ am33xx_config_vtp();
+
+ am33xx_ddr_phydata_cmd_macro(cmd_ctrl);
+ am33xx_config_ddr_data(ddr_data, 0);
+ am33xx_config_ddr_data(ddr_data, 1);
+
+ am33xx_config_io_ctrl(ioctrl);
+
+ val = readl(AM33XX_DDR_IO_CTRL);
+ val &= 0xefffffff;
+ writel(val, AM33XX_DDR_IO_CTRL);
+
+ val = readl(AM33XX_DDR_CKE_CTRL);
+ val |= 0x00000001;
+ writel(val, AM33XX_DDR_CKE_CTRL);
+
+ am33xx_config_sdram(emif_regs);
+}
diff --git a/arch/arm/mach-omap/include/mach/am33xx-silicon.h b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
index e8ecd1e..e349c4d 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-silicon.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
@@ -192,4 +192,48 @@
#define AM33XX_MAC_ID1_HI (AM33XX_CTRL_BASE + 0x63c)
#define AM33XX_MAC_MII_SEL (AM33XX_CTRL_BASE + 0x650)
+struct am33xx_cmd_control {
+ u32 slave_ratio0;
+ u32 dll_lock_diff0;
+ u32 invert_clkout0;
+ u32 slave_ratio1;
+ u32 dll_lock_diff1;
+ u32 invert_clkout1;
+ u32 slave_ratio2;
+ u32 dll_lock_diff2;
+ u32 invert_clkout2;
+};
+
+struct am33xx_emif_regs {
+ u32 emif_read_latency;
+ u32 emif_tim1;
+ u32 emif_tim2;
+ u32 emif_tim3;
+ u32 sdram_config;
+ u32 sdram_config2;
+ u32 zq_config;
+ u32 sdram_ref_ctrl;
+};
+
+struct am33xx_ddr_data {
+ u32 rd_slave_ratio0;
+ u32 wr_dqs_slave_ratio0;
+ u32 wrlvl_init_ratio0;
+ u32 gatelvl_init_ratio0;
+ u32 fifo_we_slave_ratio0;
+ u32 wr_slave_ratio0;
+ u32 use_rank0_delay;
+ u32 dll_lock_diff0;
+};
+
+void am33xx_uart0_soft_reset(void);
+void am33xx_config_vtp(void);
+void am33xx_ddr_phydata_cmd_macro(const struct am33xx_cmd_control *cmd_ctrl);
+void am33xx_config_io_ctrl(int ioctrl);
+void am33xx_config_sdram(const struct am33xx_emif_regs *regs);
+void am33xx_config_ddr_data(const struct am33xx_ddr_data *data, int macronr);
+void am335x_sdram_init(int ioctrl, const struct am33xx_cmd_control *cmd_ctrl,
+ const struct am33xx_emif_regs *emif_regs,
+ const struct am33xx_ddr_data *ddr_data);
+
#endif
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 09/22] ARM: pcm051: Clean up lowlevel code
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (7 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 08/22] ARM: am33xx: Cleanup of lowlevel code Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 10/22] ARM: beaglebone: " Sascha Hauer
` (12 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
From: Teresa Gámez <t.gamez@phytec.de>
Use now the initialisation functions from am33xx_generic.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/pcm051/lowlevel.c | 211 ++++++++------------------------------
1 file changed, 41 insertions(+), 170 deletions(-)
diff --git a/arch/arm/boards/pcm051/lowlevel.c b/arch/arm/boards/pcm051/lowlevel.c
index 3a637cf..6ad170f 100644
--- a/arch/arm/boards/pcm051/lowlevel.c
+++ b/arch/arm/boards/pcm051/lowlevel.c
@@ -13,171 +13,36 @@
#include <mach/am33xx-mux.h>
#include <mach/wdt.h>
-/* UART Defines */
-#define UART_SYSCFG_OFFSET (0x54)
-#define UART_SYSSTS_OFFSET (0x58)
-
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-
-/* AM335X EMIF Register values */
-#define VTP_CTRL_READY (0x1 << 5)
-#define VTP_CTRL_ENABLE (0x1 << 6)
-#define VTP_CTRL_START_EN (0x1)
-#define CMD_FORCE 0x00 /* common #def */
-#define CMD_DELAY 0x00
-
-#define EMIF_READ_LATENCY 0x06
-#define EMIF_SDCFG 0x61C04832 /* CL 5, CWL 5 */
-#define EMIF_SDREF 0x0000093B
-
-#define EMIF_TIM1 0x0668A39B
-#define EMIF_TIM2 0x26337FDA
-#define EMIF_TIM3 0x501F830F
-
-#define DLL_LOCK_DIFF 0x0
-#define PHY_WR_DATA 0xC1
-#define RD_DQS 0x3B
-#define WR_DQS 0x85
-#define PHY_FIFO_WE 0x100
-#define INVERT_CLKOUT 0x1
-#define PHY_RANK0_DELAY 0x01
-#define DDR_IOCTRL_VALUE 0x18B
-#define CTRL_SLAVE_RATIO 0x40
-#define PHY_LVL_MODE 0x1
-#define DDR_ZQ_CFG 0x50074BE4
-
-static void Cmd_Macro_Config(void)
-{
- writel(CTRL_SLAVE_RATIO, AM33XX_CMD0_CTRL_SLAVE_RATIO_0);
- writel(CMD_FORCE, AM33XX_CMD0_CTRL_SLAVE_FORCE_0);
- writel(CMD_DELAY, AM33XX_CMD0_CTRL_SLAVE_DELAY_0);
- writel(DLL_LOCK_DIFF, AM33XX_CMD0_DLL_LOCK_DIFF_0);
- writel(INVERT_CLKOUT, AM33XX_CMD0_INVERT_CLKOUT_0);
-
- writel(CTRL_SLAVE_RATIO, AM33XX_CMD1_CTRL_SLAVE_RATIO_0);
- writel(CMD_FORCE, AM33XX_CMD1_CTRL_SLAVE_FORCE_0);
- writel(CMD_DELAY, AM33XX_CMD1_CTRL_SLAVE_DELAY_0);
- writel(DLL_LOCK_DIFF, AM33XX_CMD1_DLL_LOCK_DIFF_0);
- writel(INVERT_CLKOUT, AM33XX_CMD1_INVERT_CLKOUT_0);
-
- writel(CTRL_SLAVE_RATIO, AM33XX_CMD2_CTRL_SLAVE_RATIO_0);
- writel(CMD_FORCE, AM33XX_CMD2_CTRL_SLAVE_FORCE_0);
- writel(CMD_DELAY, AM33XX_CMD2_CTRL_SLAVE_DELAY_0);
- writel(DLL_LOCK_DIFF, AM33XX_CMD2_DLL_LOCK_DIFF_0);
- writel(INVERT_CLKOUT, AM33XX_CMD2_INVERT_CLKOUT_0);
-}
-
-static void config_vtp(void)
-{
- writel(readl(AM33XX_VTP0_CTRL_REG) | VTP_CTRL_ENABLE,
- AM33XX_VTP0_CTRL_REG);
- writel(readl(AM33XX_VTP0_CTRL_REG) & (~VTP_CTRL_START_EN),
- AM33XX_VTP0_CTRL_REG);
- writel(readl(AM33XX_VTP0_CTRL_REG) | VTP_CTRL_START_EN,
- AM33XX_VTP0_CTRL_REG);
-
- /* Poll for READY */
- while ((readl(AM33XX_VTP0_CTRL_REG) &
- VTP_CTRL_READY) != VTP_CTRL_READY);
-}
-
-static void phy_config_data(void)
-{
- writel(RD_DQS, AM33XX_DATA0_RD_DQS_SLAVE_RATIO_0);
- writel(WR_DQS, AM33XX_DATA0_WR_DQS_SLAVE_RATIO_0);
- writel(PHY_FIFO_WE, AM33XX_DATA0_FIFO_WE_SLAVE_RATIO_0);
- writel(PHY_WR_DATA, AM33XX_DATA0_WR_DATA_SLAVE_RATIO_0);
-
- writel(RD_DQS, AM33XX_DATA1_RD_DQS_SLAVE_RATIO_0);
- writel(WR_DQS, AM33XX_DATA1_WR_DQS_SLAVE_RATIO_0);
- writel(PHY_FIFO_WE, AM33XX_DATA1_FIFO_WE_SLAVE_RATIO_0);
- writel(PHY_WR_DATA, AM33XX_DATA1_WR_DATA_SLAVE_RATIO_0);
-}
-
-static void config_emif(void)
-{
- /*Program EMIF0 CFG Registers*/
- writel(EMIF_READ_LATENCY, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_1));
- writel(EMIF_READ_LATENCY,
- AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_1_SHADOW));
- writel(EMIF_READ_LATENCY, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_2));
- writel(EMIF_TIM1, AM33XX_EMIF4_0_REG(SDRAM_TIM_1));
- writel(EMIF_TIM1, AM33XX_EMIF4_0_REG(SDRAM_TIM_1_SHADOW));
- writel(EMIF_TIM2, AM33XX_EMIF4_0_REG(SDRAM_TIM_2));
- writel(EMIF_TIM2, AM33XX_EMIF4_0_REG(SDRAM_TIM_2_SHADOW));
- writel(EMIF_TIM3, AM33XX_EMIF4_0_REG(SDRAM_TIM_3));
- writel(EMIF_TIM3, AM33XX_EMIF4_0_REG(SDRAM_TIM_3_SHADOW));
-
- writel(EMIF_SDREF, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL));
- writel(EMIF_SDREF, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL_SHADOW));
-
- writel(EMIF_SDCFG, AM33XX_EMIF4_0_REG(SDRAM_CONFIG));
- writel(DDR_ZQ_CFG, AM33XX_EMIF4_0_REG(ZQ_CONFIG));
-
- while ((readl(AM33XX_EMIF4_0_REG(SDRAM_STATUS)) & 0x4) != 0x4);
-}
-
-static void pcm051_config_ddr(void)
-{
- enable_ddr_clocks();
-
- config_vtp();
-
- /* init mode */
- writel(PHY_LVL_MODE, AM33XX_DATA0_WRLVL_INIT_MODE_0);
- writel(PHY_LVL_MODE, AM33XX_DATA0_GATELVL_INIT_MODE_0);
- writel(PHY_LVL_MODE, AM33XX_DATA1_WRLVL_INIT_MODE_0);
- writel(PHY_LVL_MODE, AM33XX_DATA1_GATELVL_INIT_MODE_0);
-
- Cmd_Macro_Config();
- phy_config_data();
-
- writel(PHY_RANK0_DELAY, AM33XX_DATA0_RANK0_DELAYS_0);
- writel(PHY_RANK0_DELAY, AM33XX_DATA1_RANK0_DELAYS_0);
-
- writel(DDR_IOCTRL_VALUE, AM33XX_DDR_CMD0_IOCTRL);
- writel(DDR_IOCTRL_VALUE, AM33XX_DDR_CMD1_IOCTRL);
- writel(DDR_IOCTRL_VALUE, AM33XX_DDR_CMD2_IOCTRL);
- writel(DDR_IOCTRL_VALUE, AM33XX_DDR_DATA0_IOCTRL);
- writel(DDR_IOCTRL_VALUE, AM33XX_DDR_DATA1_IOCTRL);
-
- writel(readl(AM33XX_DDR_IO_CTRL) &
- 0xefffffff, AM33XX_DDR_IO_CTRL);
- writel(readl(AM33XX_DDR_CKE_CTRL) |
- 0x00000001, AM33XX_DDR_CKE_CTRL);
-
- config_emif();
-}
-
-/*
- * early system init of muxing and clocks.
- */
-void pcm051_sram_init(void)
-{
- u32 regVal, uart_base;
-
- /* Setup the PLLs and the clocks for the peripherals */
- pll_init(MPUPLL_M_600, 25);
-
- pcm051_config_ddr();
-
- /* UART softreset */
- am33xx_enable_uart0_pin_mux();
- uart_base = AM33XX_UART0_BASE;
-
- regVal = readl(uart_base + UART_SYSCFG_OFFSET);
- regVal |= UART_RESET;
- writel(regVal, (uart_base + UART_SYSCFG_OFFSET));
- while ((readl(uart_base + UART_SYSSTS_OFFSET) &
- UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK);
-
- /* Disable smart idle */
- regVal = readl((uart_base + UART_SYSCFG_OFFSET));
- regVal |= UART_SMART_IDLE_EN;
- writel(regVal, (uart_base + UART_SYSCFG_OFFSET));
-}
+static const struct am33xx_cmd_control MT41J256M8HX15E_2x256M8_cmd = {
+ .slave_ratio0 = 0x40,
+ .dll_lock_diff0 = 0x0,
+ .invert_clkout0 = 0x1,
+ .slave_ratio1 = 0x40,
+ .dll_lock_diff1 = 0x0,
+ .invert_clkout1 = 0x1,
+ .slave_ratio2 = 0x40,
+ .dll_lock_diff2 = 0x0,
+ .invert_clkout2 = 0x1,
+};
+
+static const struct am33xx_emif_regs MT41J256M8HX15E_2x256M8_regs = {
+ .emif_read_latency = 0x6,
+ .emif_tim1 = 0x0668A39B,
+ .emif_tim2 = 0x26337FDA,
+ .emif_tim3 = 0x501F830F,
+ .sdram_config = 0x61C04832,
+ .zq_config = 0x50074BE4,
+ .sdram_ref_ctrl = 0x0000093B,
+};
+
+static const struct am33xx_ddr_data MT41J256M8HX15E_2x256M8_data = {
+ .rd_slave_ratio0 = 0x3B,
+ .wr_dqs_slave_ratio0 = 0x85,
+ .fifo_we_slave_ratio0 = 0x100,
+ .wr_slave_ratio0 = 0xC1,
+ .use_rank0_delay = 0x01,
+ .dll_lock_diff0 = 0x0,
+};
/**
* @brief The basic entry point for board initialization.
@@ -190,8 +55,6 @@ void pcm051_sram_init(void)
*/
static int pcm051_board_init(void)
{
- int in_sdram = running_in_sdram();
-
/* WDT1 is already running when the bootloader gets control
* Disable it to avoid "random" resets
*/
@@ -201,9 +64,17 @@ static int pcm051_board_init(void)
writel(WDT_DISABLE_CODE2, AM33XX_WDT_REG(WSPR));
while (readl(AM33XX_WDT_REG(WWPS)) != 0x0);
- /* Dont reconfigure SDRAM while running in SDRAM! */
- if (!in_sdram)
- pcm051_sram_init();
+ if (running_in_sdram())
+ return 0;
+
+ pll_init(MPUPLL_M_600, 25);
+
+ am335x_sdram_init(0x18B, &MT41J256M8HX15E_2x256M8_cmd,
+ &MT41J256M8HX15E_2x256M8_regs,
+ &MT41J256M8HX15E_2x256M8_data);
+
+ am33xx_uart0_soft_reset();
+ am33xx_enable_uart0_pin_mux();
return 0;
}
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 10/22] ARM: beaglebone: Clean up lowlevel code
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (8 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 09/22] ARM: pcm051: Clean up " Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 11/22] ARM: am33xx: set bootsource instance correctly for MMC1 Sascha Hauer
` (11 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
From: Teresa Gámez <t.gamez@phytec.de>
Using here now the initialisiation functions in
am33xx_generic.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/beaglebone/lowlevel.c | 256 +++++++---------------------------
1 file changed, 52 insertions(+), 204 deletions(-)
diff --git a/arch/arm/boards/beaglebone/lowlevel.c b/arch/arm/boards/beaglebone/lowlevel.c
index be775a8..febe714 100644
--- a/arch/arm/boards/beaglebone/lowlevel.c
+++ b/arch/arm/boards/beaglebone/lowlevel.c
@@ -13,211 +13,59 @@
#include <mach/am33xx-generic.h>
#include <mach/wdt.h>
-/* UART Defines */
-#define UART_SYSCFG_OFFSET (0x54)
-#define UART_SYSSTS_OFFSET (0x58)
-
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-
-/* AM335X EMIF Register values */
-#define EMIF_SDMGT 0x80000000
-#define EMIF_SDRAM 0x00004650
-#define EMIF_PHYCFG 0x2
-#define DDR_PHY_RESET (0x1 << 10)
-#define DDR_FUNCTIONAL_MODE_EN 0x1
-#define DDR_PHY_READY (0x1 << 2)
-#define VTP_CTRL_READY (0x1 << 5)
-#define VTP_CTRL_ENABLE (0x1 << 6)
-#define VTP_CTRL_LOCK_EN (0x1 << 4)
-#define VTP_CTRL_START_EN (0x1)
-#define DDR2_RATIO 0x80 /* for mDDR */
-#define CMD_FORCE 0x00 /* common #def */
-#define CMD_DELAY 0x00
-
-#define EMIF_READ_LATENCY 0x05
-#define EMIF_TIM1 0x0666B3D6
-#define EMIF_TIM2 0x143731DA
-#define EMIF_TIM3 0x00000347
-#define EMIF_SDCFG 0x43805332
-#define EMIF_SDREF 0x0000081a
-#define DDR2_DLL_LOCK_DIFF 0x0
#define DDR2_RD_DQS 0x12
#define DDR2_PHY_FIFO_WE 0x80
-
-#define DDR2_INVERT_CLKOUT 0x00
#define DDR2_WR_DQS 0x00
#define DDR2_PHY_WRLVL 0x00
#define DDR2_PHY_GATELVL 0x00
#define DDR2_PHY_WR_DATA 0x40
-#define PHY_RANK0_DELAY 0x01
-#define PHY_DLL_LOCK_DIFF 0x0
-#define DDR_IOCTRL_VALUE 0x18B
-
-static void beaglebone_data_macro_config(int dataMacroNum)
-{
- u32 BaseAddrOffset = 0x00;
-
- if (dataMacroNum == 1)
- BaseAddrOffset = 0xA4;
-
- __raw_writel(((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20)
- |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)),
- (AM33XX_DATA0_RD_DQS_SLAVE_RATIO_0 + BaseAddrOffset));
- __raw_writel(DDR2_RD_DQS>>2,
- (AM33XX_DATA0_RD_DQS_SLAVE_RATIO_1 + BaseAddrOffset));
- __raw_writel(((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20)
- |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)),
- (AM33XX_DATA0_WR_DQS_SLAVE_RATIO_0 + BaseAddrOffset));
- __raw_writel(DDR2_WR_DQS>>2,
- (AM33XX_DATA0_WR_DQS_SLAVE_RATIO_1 + BaseAddrOffset));
- __raw_writel(((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20)
- |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)),
- (AM33XX_DATA0_WRLVL_INIT_RATIO_0 + BaseAddrOffset));
- __raw_writel(DDR2_PHY_WRLVL>>2,
- (AM33XX_DATA0_WRLVL_INIT_RATIO_1 + BaseAddrOffset));
- __raw_writel(((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20)
- |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)),
- (AM33XX_DATA0_GATELVL_INIT_RATIO_0 + BaseAddrOffset));
- __raw_writel(DDR2_PHY_GATELVL>>2,
- (AM33XX_DATA0_GATELVL_INIT_RATIO_1 + BaseAddrOffset));
- __raw_writel(((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20)
- |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)),
- (AM33XX_DATA0_FIFO_WE_SLAVE_RATIO_0 + BaseAddrOffset));
- __raw_writel(DDR2_PHY_FIFO_WE>>2,
- (AM33XX_DATA0_FIFO_WE_SLAVE_RATIO_1 + BaseAddrOffset));
- __raw_writel(((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20)
- |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)),
- (AM33XX_DATA0_WR_DATA_SLAVE_RATIO_0 + BaseAddrOffset));
- __raw_writel(DDR2_PHY_WR_DATA>>2,
- (AM33XX_DATA0_WR_DATA_SLAVE_RATIO_1 + BaseAddrOffset));
- __raw_writel(PHY_DLL_LOCK_DIFF,
- (AM33XX_DATA0_DLL_LOCK_DIFF_0 + BaseAddrOffset));
-}
-
-static void beaglebone_cmd_macro_config(void)
-{
- __raw_writel(DDR2_RATIO, AM33XX_CMD0_CTRL_SLAVE_RATIO_0);
- __raw_writel(CMD_FORCE, AM33XX_CMD0_CTRL_SLAVE_FORCE_0);
- __raw_writel(CMD_DELAY, AM33XX_CMD0_CTRL_SLAVE_DELAY_0);
- __raw_writel(DDR2_DLL_LOCK_DIFF, AM33XX_CMD0_DLL_LOCK_DIFF_0);
- __raw_writel(DDR2_INVERT_CLKOUT, AM33XX_CMD0_INVERT_CLKOUT_0);
-
- __raw_writel(DDR2_RATIO, AM33XX_CMD1_CTRL_SLAVE_RATIO_0);
- __raw_writel(CMD_FORCE, AM33XX_CMD1_CTRL_SLAVE_FORCE_0);
- __raw_writel(CMD_DELAY, AM33XX_CMD1_CTRL_SLAVE_DELAY_0);
- __raw_writel(DDR2_DLL_LOCK_DIFF, AM33XX_CMD1_DLL_LOCK_DIFF_0);
- __raw_writel(DDR2_INVERT_CLKOUT, AM33XX_CMD1_INVERT_CLKOUT_0);
-
- __raw_writel(DDR2_RATIO, AM33XX_CMD2_CTRL_SLAVE_RATIO_0);
- __raw_writel(CMD_FORCE, AM33XX_CMD2_CTRL_SLAVE_FORCE_0);
- __raw_writel(CMD_DELAY, AM33XX_CMD2_CTRL_SLAVE_DELAY_0);
- __raw_writel(DDR2_DLL_LOCK_DIFF, AM33XX_CMD2_DLL_LOCK_DIFF_0);
- __raw_writel(DDR2_INVERT_CLKOUT, AM33XX_CMD2_INVERT_CLKOUT_0);
-}
-
-static void beaglebone_config_vtp(void)
-{
- __raw_writel(__raw_readl(AM33XX_VTP0_CTRL_REG) | VTP_CTRL_ENABLE,
- AM33XX_VTP0_CTRL_REG);
- __raw_writel(__raw_readl(AM33XX_VTP0_CTRL_REG) & (~VTP_CTRL_START_EN),
- AM33XX_VTP0_CTRL_REG);
- __raw_writel(__raw_readl(AM33XX_VTP0_CTRL_REG) | VTP_CTRL_START_EN,
- AM33XX_VTP0_CTRL_REG);
-
- /* Poll for READY */
- while ((__raw_readl(AM33XX_VTP0_CTRL_REG) & VTP_CTRL_READY) != VTP_CTRL_READY);
-}
-
-static void beaglebone_config_emif_ddr2(void)
-{
- u32 i;
-
- /*Program EMIF0 CFG Registers*/
- __raw_writel(EMIF_READ_LATENCY, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_1));
- __raw_writel(EMIF_READ_LATENCY, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_1_SHADOW));
- __raw_writel(EMIF_READ_LATENCY, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_2));
- __raw_writel(EMIF_TIM1, AM33XX_EMIF4_0_REG(SDRAM_TIM_1));
- __raw_writel(EMIF_TIM1, AM33XX_EMIF4_0_REG(SDRAM_TIM_1_SHADOW));
- __raw_writel(EMIF_TIM2, AM33XX_EMIF4_0_REG(SDRAM_TIM_2));
- __raw_writel(EMIF_TIM2, AM33XX_EMIF4_0_REG(SDRAM_TIM_2_SHADOW));
- __raw_writel(EMIF_TIM3, AM33XX_EMIF4_0_REG(SDRAM_TIM_3));
- __raw_writel(EMIF_TIM3, AM33XX_EMIF4_0_REG(SDRAM_TIM_3_SHADOW));
-
- __raw_writel(EMIF_SDCFG, AM33XX_EMIF4_0_REG(SDRAM_CONFIG));
- __raw_writel(EMIF_SDCFG, AM33XX_EMIF4_0_REG(SDRAM_CONFIG2));
-
- /* __raw_writel(EMIF_SDMGT, EMIF0_0_SDRAM_MGMT_CTRL);
- __raw_writel(EMIF_SDMGT, EMIF0_0_SDRAM_MGMT_CTRL_SHD); */
- __raw_writel(0x00004650, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL));
- __raw_writel(0x00004650, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL_SHADOW));
-
- for (i = 0; i < 5000; i++) {
-
- }
-
- /* __raw_writel(EMIF_SDMGT, EMIF0_0_SDRAM_MGMT_CTRL);
- __raw_writel(EMIF_SDMGT, EMIF0_0_SDRAM_MGMT_CTRL_SHD); */
- __raw_writel(EMIF_SDREF, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL));
- __raw_writel(EMIF_SDREF, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL_SHADOW));
-
- __raw_writel(EMIF_SDCFG, AM33XX_EMIF4_0_REG(SDRAM_CONFIG));
- __raw_writel(EMIF_SDCFG, AM33XX_EMIF4_0_REG(SDRAM_CONFIG2));
-}
-
-static void beaglebone_config_ddr(void)
-{
- enable_ddr_clocks();
-
- beaglebone_config_vtp();
-
- beaglebone_cmd_macro_config();
- beaglebone_data_macro_config(0);
- beaglebone_data_macro_config(1);
-
- __raw_writel(PHY_RANK0_DELAY, AM33XX_DATA0_RANK0_DELAYS_0);
- __raw_writel(PHY_RANK0_DELAY, AM33XX_DATA1_RANK0_DELAYS_0);
-
- __raw_writel(DDR_IOCTRL_VALUE, AM33XX_DDR_CMD0_IOCTRL);
- __raw_writel(DDR_IOCTRL_VALUE, AM33XX_DDR_CMD1_IOCTRL);
- __raw_writel(DDR_IOCTRL_VALUE, AM33XX_DDR_CMD2_IOCTRL);
- __raw_writel(DDR_IOCTRL_VALUE, AM33XX_DDR_DATA0_IOCTRL);
- __raw_writel(DDR_IOCTRL_VALUE, AM33XX_DDR_DATA1_IOCTRL);
-
- __raw_writel(__raw_readl(AM33XX_DDR_IO_CTRL) & 0xefffffff, AM33XX_DDR_IO_CTRL);
- __raw_writel(__raw_readl(AM33XX_DDR_CKE_CTRL) | 0x00000001, AM33XX_DDR_CKE_CTRL);
-
- beaglebone_config_emif_ddr2();
-}
-
-/*
- * early system init of muxing and clocks.
- */
-void beaglebone_sram_init(void)
-{
- u32 regVal, uart_base;
-
- /* Setup the PLLs and the clocks for the peripherals */
- pll_init(MPUPLL_M_500, 24);
-
- beaglebone_config_ddr();
-
- /* UART softreset */
- uart_base = AM33XX_UART0_BASE;
-
- regVal = __raw_readl(uart_base + UART_SYSCFG_OFFSET);
- regVal |= UART_RESET;
- __raw_writel(regVal, (uart_base + UART_SYSCFG_OFFSET) );
- while ((__raw_readl(uart_base + UART_SYSSTS_OFFSET) &
- UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK);
-
- /* Disable smart idle */
- regVal = __raw_readl((uart_base + UART_SYSCFG_OFFSET));
- regVal |= UART_SMART_IDLE_EN;
- __raw_writel(regVal, (uart_base + UART_SYSCFG_OFFSET));
-}
+static const struct am33xx_cmd_control ddr2_cmd_ctrl = {
+ .slave_ratio0 = 0x80,
+ .dll_lock_diff0 = 0x0,
+ .invert_clkout0 = 0x0,
+ .slave_ratio1 = 0x80,
+ .dll_lock_diff1 = 0x0,
+ .invert_clkout1 = 0x0,
+ .slave_ratio2 = 0x80,
+ .dll_lock_diff2 = 0x0,
+ .invert_clkout2 = 0x0,
+};
+
+static const struct am33xx_emif_regs ddr2_regs = {
+ .emif_read_latency = 0x5,
+ .emif_tim1 = 0x0666B3D6,
+ .emif_tim2 = 0x143731DA,
+ .emif_tim3 = 0x00000347,
+ .sdram_config = 0x43805332,
+ .sdram_config2 = 0x43805332,
+ .sdram_ref_ctrl = 0x0000081a,
+};
+
+static const struct am33xx_ddr_data ddr2_data = {
+ .rd_slave_ratio0 = (DDR2_RD_DQS << 30) | (DDR2_RD_DQS << 20) |
+ (DDR2_RD_DQS << 10) | (DDR2_RD_DQS << 0),
+ .wr_dqs_slave_ratio0 = (DDR2_WR_DQS << 30) | (DDR2_WR_DQS << 20) |
+ (DDR2_WR_DQS << 10) | (DDR2_WR_DQS << 0),
+ .wrlvl_init_ratio0 = (DDR2_PHY_WRLVL << 30) |
+ (DDR2_PHY_WRLVL << 20) |
+ (DDR2_PHY_WRLVL << 10) |
+ (DDR2_PHY_WRLVL << 0),
+ .gatelvl_init_ratio0 = (DDR2_PHY_GATELVL << 30) |
+ (DDR2_PHY_GATELVL << 20) |
+ (DDR2_PHY_GATELVL << 10) |
+ (DDR2_PHY_GATELVL << 0),
+ .fifo_we_slave_ratio0 = (DDR2_PHY_FIFO_WE << 30) |
+ (DDR2_PHY_FIFO_WE << 20) |
+ (DDR2_PHY_FIFO_WE << 10) |
+ (DDR2_PHY_FIFO_WE << 0),
+ .wr_slave_ratio0 = (DDR2_PHY_WR_DATA << 30) |
+ (DDR2_PHY_WR_DATA << 20) |
+ (DDR2_PHY_WR_DATA << 10) |
+ (DDR2_PHY_WR_DATA << 0),
+ .use_rank0_delay = 0x01,
+ .dll_lock_diff0 = 0x0,
+};
/**
* @brief The basic entry point for board initialization.
@@ -230,8 +78,6 @@ void beaglebone_sram_init(void)
*/
static int beaglebone_board_init(void)
{
- int in_sdram = running_in_sdram();
-
/* WDT1 is already running when the bootloader gets control
* Disable it to avoid "random" resets
*/
@@ -240,11 +86,13 @@ static int beaglebone_board_init(void)
__raw_writel(WDT_DISABLE_CODE2, AM33XX_WDT_REG(WSPR));
while(__raw_readl(AM33XX_WDT_REG(WWPS)) != 0x0);
- /* Dont reconfigure SDRAM while running in SDRAM! */
- if (!in_sdram)
- beaglebone_sram_init();
+ if (running_in_sdram())
+ return 0;
+
+ pll_init(MPUPLL_M_500, 24);
+
+ am335x_sdram_init(0x18B, &ddr2_cmd_ctrl, &ddr2_regs, &ddr2_data);
- /* Enable pin mux */
am33xx_enable_uart0_pin_mux();
return 0;
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 11/22] ARM: am33xx: set bootsource instance correctly for MMC1
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (9 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 10/22] ARM: beaglebone: " Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 12/22] ARM: cpuinfo: display the core name and version Sascha Hauer
` (10 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/am33xx_generic.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap/am33xx_generic.c b/arch/arm/mach-omap/am33xx_generic.c
index c1e63cd..67e4a45 100644
--- a/arch/arm/mach-omap/am33xx_generic.c
+++ b/arch/arm/mach-omap/am33xx_generic.c
@@ -100,6 +100,7 @@ u32 running_in_sdram(void)
static int am33xx_bootsource(void)
{
enum bootsource src;
+ int instance = 0;
switch (omap_bootinfo[2] & 0xFF) {
case 0x05:
@@ -107,6 +108,11 @@ static int am33xx_bootsource(void)
break;
case 0x08:
src = BOOTSOURCE_MMC;
+ instance = 0;
+ break;
+ case 0x09:
+ src = BOOTSOURCE_MMC;
+ instance = 1;
break;
case 0x0b:
src = BOOTSOURCE_SPI;
@@ -115,7 +121,7 @@ static int am33xx_bootsource(void)
src = BOOTSOURCE_UNKNOWN;
}
bootsource_set(src);
- bootsource_set_instance(0);
+ bootsource_set_instance(instance);
return 0;
}
postcore_initcall(am33xx_bootsource);
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 12/22] ARM: cpuinfo: display the core name and version
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (10 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 11/22] ARM: am33xx: set bootsource instance correctly for MMC1 Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 13/22] ARM: am33xx: implement cpu revision decoding Sascha Hauer
` (9 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
From: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/cpu/cpuinfo.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/cpu/cpuinfo.c b/arch/arm/cpu/cpuinfo.c
index 8aea4b4..260d47b 100644
--- a/arch/arm/cpu/cpuinfo.c
+++ b/arch/arm/cpu/cpuinfo.c
@@ -31,6 +31,12 @@
#define CPU_ARCH_ARMv6 8
#define CPU_ARCH_ARMv7 9
+#define ARM_CPU_PART_CORTEX_A5 0xC050
+#define ARM_CPU_PART_CORTEX_A7 0xC070
+#define ARM_CPU_PART_CORTEX_A8 0xC080
+#define ARM_CPU_PART_CORTEX_A9 0xC090
+#define ARM_CPU_PART_CORTEX_A15 0xC0F0
+
static void decode_cache(unsigned long size)
{
int linelen = 1 << ((size & 0x3) + 3);
@@ -154,6 +160,33 @@ static int do_cpuinfo(int argc, char *argv[])
printf("implementer: %s\narchitecture: %s\n",
implementer, architecture);
+ if (cpu_arch == CPU_ARCH_ARMv7) {
+ unsigned int major, minor;
+ char *part;
+ major = (mainid >> 20) & 0xf;
+ minor = mainid & 0xf;
+ switch (mainid & 0xfff0) {
+ case ARM_CPU_PART_CORTEX_A5:
+ part = "Cortex-A5";
+ break;
+ case ARM_CPU_PART_CORTEX_A7:
+ part = "Cortex-A7";
+ break;
+ case ARM_CPU_PART_CORTEX_A8:
+ part = "Cortex-A8";
+ break;
+ case ARM_CPU_PART_CORTEX_A9:
+ part = "Cortex-A9";
+ break;
+ case ARM_CPU_PART_CORTEX_A15:
+ part = "Cortex-A15";
+ break;
+ default:
+ part = "unknown";
+ }
+ printf("core: %s r%up%u\n", part, major, minor);
+ }
+
if (cache & (1 << 24)) {
/* separate I/D cache */
printf("I-cache: ");
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 13/22] ARM: am33xx: implement cpu revision decoding
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (11 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 12/22] ARM: cpuinfo: display the core name and version Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 14/22] ARM: am33xx: beaglebone: configure I2C EEPROM Sascha Hauer
` (8 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
From: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/am33xx_generic.c | 34 +++++++++++++++++++++++-
arch/arm/mach-omap/include/mach/am33xx-generic.h | 2 ++
arch/arm/mach-omap/include/mach/am33xx-silicon.h | 1 +
arch/arm/mach-omap/include/mach/sys_info.h | 10 +++++--
4 files changed, 44 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap/am33xx_generic.c b/arch/arm/mach-omap/am33xx_generic.c
index 67e4a45..3690ce1 100644
--- a/arch/arm/mach-omap/am33xx_generic.c
+++ b/arch/arm/mach-omap/am33xx_generic.c
@@ -1,6 +1,6 @@
/*
* (C) Copyright 2012 Teresa Gámez, Phytec Messtechnik GmbH
- * (C) Copyright 2012 Jan Luebbe <j.luebbe@pengutronix.de>
+ * (C) Copyright 2012-2013 Jan Luebbe <j.luebbe@pengutronix.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -38,6 +38,38 @@ void __noreturn reset_cpu(unsigned long addr)
}
/**
+ * @brief Extract the AM33xx ES revision
+ *
+ * The significance of the CPU revision depends upon the cpu type.
+ * Latest known revision is considered default.
+ *
+ * @return silicon version
+ */
+u32 am33xx_get_cpu_rev(void)
+{
+ u32 version, retval;
+
+ version = (readl(AM33XX_IDCODE_REG) >> 28) & 0xF;
+
+ switch (version) {
+ case 0:
+ retval = AM335X_ES1_0;
+ break;
+ case 1:
+ retval = AM335X_ES2_0;
+ break;
+ case 2:
+ /*
+ * Fall through the default case.
+ */
+ default:
+ retval = AM335X_ES2_1;
+ }
+
+ return retval;
+}
+
+/**
* @brief Get the upper address of current execution
*
* we can use this to figure out if we are running in SRAM /
diff --git a/arch/arm/mach-omap/include/mach/am33xx-generic.h b/arch/arm/mach-omap/include/mach/am33xx-generic.h
index d9d2efb..ec22ad2 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-generic.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-generic.h
@@ -6,6 +6,8 @@
int am33xx_register_ethaddr(int eth_id, int mac_id);
+u32 am33xx_get_cpu_rev(void);
+
static inline void am33xx_save_bootinfo(uint32_t *info)
{
unsigned long i = (unsigned long)info;
diff --git a/arch/arm/mach-omap/include/mach/am33xx-silicon.h b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
index e349c4d..30b605a 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-silicon.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
@@ -71,6 +71,7 @@
/* CTRL */
#define AM33XX_CTRL_BASE (AM33XX_L4_WKUP_BASE + 0x210000)
+#define AM33XX_IDCODE_REG (AM33XX_CTRL_BASE + 0x600)
/* Watchdog Timer */
#define AM33XX_WDT_BASE 0x44E35000
diff --git a/arch/arm/mach-omap/include/mach/sys_info.h b/arch/arm/mach-omap/include/mach/sys_info.h
index 4d9b138..fce5895 100644
--- a/arch/arm/mach-omap/include/mach/sys_info.h
+++ b/arch/arm/mach-omap/include/mach/sys_info.h
@@ -40,6 +40,7 @@
#define CPU_1710 0x1710
#define CPU_2420 0x2420
#define CPU_2430 0x2430
+#define CPU_3350 0x3350
#define CPU_3430 0x3430
#define CPU_3630 0x3630
@@ -54,6 +55,10 @@
#define OMAP34XX_ES3 cpu_revision(CPU_3430, 3)
#define OMAP34XX_ES3_1 cpu_revision(CPU_3430, 4)
+#define AM335X_ES1_0 cpu_revision(CPU_3350, 0)
+#define AM335X_ES2_0 cpu_revision(CPU_3350, 1)
+#define AM335X_ES2_1 cpu_revision(CPU_3350, 2)
+
#define OMAP36XX_ES1 cpu_revision(CPU_3630, 0)
#define OMAP36XX_ES1_1 cpu_revision(CPU_3630, 1)
#define OMAP36XX_ES1_2 cpu_revision(CPU_3630, 2)
@@ -76,8 +81,9 @@
/**
* Hawkeye definitions to identify silicon families
*/
-#define OMAP_HAWKEYE_34XX 0xB7AE
-#define OMAP_HAWKEYE_36XX 0xB891
+#define OMAP_HAWKEYE_34XX 0xB7AE /* OMAP34xx */
+#define OMAP_HAWKEYE_36XX 0xB891 /* OMAP36xx */
+#define OMAP_HAWKEYE_335X 0xB944 /* AM335x */
/** These are implemented by the System specific code in omapX-generic.c */
u32 get_cpu_type(void);
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 14/22] ARM: am33xx: beaglebone: configure I2C EEPROM
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (12 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 13/22] ARM: am33xx: implement cpu revision decoding Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 15/22] ARM: am33xx: Add mmc1 registration helper Sascha Hauer
` (7 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
From: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/beaglebone/board.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boards/beaglebone/board.c b/arch/arm/boards/beaglebone/board.c
index 52b3ec8..e12c70b 100644
--- a/arch/arm/boards/beaglebone/board.c
+++ b/arch/arm/boards/beaglebone/board.c
@@ -100,11 +100,20 @@ static void beaglebone_eth_init(void)
am33xx_add_cpsw(&cpsw_data);
}
+static struct i2c_board_info i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("24c256", 0x50)
+ },
+};
+
static int beaglebone_devices_init(void)
{
am33xx_add_mmc0(NULL);
am33xx_enable_i2c0_pin_mux();
+ i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
+ am33xx_add_i2c0(NULL);
+
beaglebone_eth_init();
armlinux_set_bootparams((void *)0x80000100);
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 15/22] ARM: am33xx: Add mmc1 registration helper
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (13 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 14/22] ARM: am33xx: beaglebone: configure I2C EEPROM Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 16/22] ARM: am33xx: make DDR PLL frequency configurable Sascha Hauer
` (6 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/am33xx-devices.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/mach-omap/include/mach/am33xx-devices.h b/arch/arm/mach-omap/include/mach/am33xx-devices.h
index 6a4d901..6691980 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-devices.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-devices.h
@@ -31,6 +31,12 @@ static inline struct device_d *am33xx_add_mmc0(struct omap_hsmmc_platform_data *
AM33XX_MMCHS0_BASE, SZ_4K, IORESOURCE_MEM, pdata);
}
+static inline struct device_d *am33xx_add_mmc1(struct omap_hsmmc_platform_data *pdata)
+{
+ return add_generic_device("omap4-hsmmc", 1, NULL,
+ AM33XX_MMC1_BASE, SZ_4K, IORESOURCE_MEM, pdata);
+}
+
static inline struct device_d *am33xx_add_cpsw(struct cpsw_platform_data *cpsw_data)
{
return add_generic_device("cpsw", 0, NULL,
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 16/22] ARM: am33xx: make DDR PLL frequency configurable
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (14 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 15/22] ARM: am33xx: Add mmc1 registration helper Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 17/22] rework debug_ll Sascha Hauer
` (5 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
Needed for 400MHz DDR3.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/beaglebone/lowlevel.c | 2 +-
arch/arm/boards/pcm051/lowlevel.c | 2 +-
arch/arm/mach-omap/am33xx_clock.c | 10 +++++-----
arch/arm/mach-omap/include/mach/am33xx-clock.h | 6 ++++--
4 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boards/beaglebone/lowlevel.c b/arch/arm/boards/beaglebone/lowlevel.c
index febe714..0a32d3b 100644
--- a/arch/arm/boards/beaglebone/lowlevel.c
+++ b/arch/arm/boards/beaglebone/lowlevel.c
@@ -89,7 +89,7 @@ static int beaglebone_board_init(void)
if (running_in_sdram())
return 0;
- pll_init(MPUPLL_M_500, 24);
+ pll_init(MPUPLL_M_500, 24, DDRPLL_M_266);
am335x_sdram_init(0x18B, &ddr2_cmd_ctrl, &ddr2_regs, &ddr2_data);
diff --git a/arch/arm/boards/pcm051/lowlevel.c b/arch/arm/boards/pcm051/lowlevel.c
index 6ad170f..793d154 100644
--- a/arch/arm/boards/pcm051/lowlevel.c
+++ b/arch/arm/boards/pcm051/lowlevel.c
@@ -67,7 +67,7 @@ static int pcm051_board_init(void)
if (running_in_sdram())
return 0;
- pll_init(MPUPLL_M_600, 25);
+ pll_init(MPUPLL_M_600, 25, DDRPLL_M_266);
am335x_sdram_init(0x18B, &MT41J256M8HX15E_2x256M8_cmd,
&MT41J256M8HX15E_2x256M8_regs,
diff --git a/arch/arm/mach-omap/am33xx_clock.c b/arch/arm/mach-omap/am33xx_clock.c
index c6cae42..692b0ec 100644
--- a/arch/arm/mach-omap/am33xx_clock.c
+++ b/arch/arm/mach-omap/am33xx_clock.c
@@ -248,7 +248,7 @@ static void per_pll_config(int osc)
while(__raw_readl(CM_IDLEST_DPLL_PER) != 0x1);
}
-static void ddr_pll_config(int osc)
+static void ddr_pll_config(int osc, int ddrpll_M)
{
u32 clkmode, clksel, div_m2;
@@ -263,7 +263,7 @@ static void ddr_pll_config(int osc)
while ((__raw_readl(CM_IDLEST_DPLL_DDR) & 0x00000100) != 0x00000100);
clksel = clksel & (~0x7ffff);
- clksel = clksel | ((DDRPLL_M << 0x8) | (osc - 1));
+ clksel = clksel | ((ddrpll_M << 0x8) | (osc - 1));
__raw_writel(clksel, CM_CLKSEL_DPLL_DDR);
div_m2 = div_m2 & 0xFFFFFFE0;
@@ -288,18 +288,18 @@ void enable_ddr_clocks(void)
PRCM_L3_GCLK_ACTIVITY));
/* Poll if module is functional */
while ((__raw_readl(CM_PER_EMIF_CLKCTRL)) != PRCM_MOD_EN);
-
}
/*
* Configure the PLL/PRCM for necessary peripherals
*/
-void pll_init(int mpupll_M, int osc)
+void pll_init(int mpupll_M, int osc, int ddrpll_M)
{
mpu_pll_config(mpupll_M, osc);
core_pll_config(osc);
per_pll_config(osc);
- ddr_pll_config(osc);
+ ddr_pll_config(osc, ddrpll_M);
+
/* Enable the required interconnect clocks */
interface_clocks_enable();
/* Enable power domain transition */
diff --git a/arch/arm/mach-omap/include/mach/am33xx-clock.h b/arch/arm/mach-omap/include/mach/am33xx-clock.h
index 6035da6..b3c7519 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-clock.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-clock.h
@@ -48,7 +48,9 @@
/* DDR Freq is 266 MHZ for now*/
/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */
-#define DDRPLL_M 266
+#define DDRPLL_M_266 266
+#define DDRPLL_M_400 400
+#define DDRPLL_N (OSC - 1)
#define DDRPLL_M2 1
/* PRCM */
@@ -181,7 +183,7 @@
#define CM_ALWON_GPMC_CLKCTRL CM_PER_GPMC_CLKCTRL
-extern void pll_init(int mpupll_M, int osc);
+extern void pll_init(int mpupll_M, int osc, int ddrpll_M);
extern void enable_ddr_clocks(void);
#endif /* endif _AM33XX_CLOCKS_H_ */
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 17/22] rework debug_ll
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (15 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 16/22] ARM: am33xx: make DDR PLL frequency configurable Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:55 ` [PATCH 18/22] ARM: beaglebone: Initialize UART for lowlevel debugging Sascha Hauer
` (4 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
Convert to static inline functions and use lower case letters for function
names. Also, include mach/debug_ll.h when an architecture provides support
for debug_ll, not only when it's actually enabled. This allows architecures
to put some UART initialization code into mach/debug_ll.h which is compiled
out when debug_ll is disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
common/console.c | 8 +++----
common/console_simple.c | 2 +-
include/debug_ll.h | 61 ++++++++++++++++++++++++++++++++++---------------
3 files changed, 48 insertions(+), 23 deletions(-)
diff --git a/common/console.c b/common/console.c
index 1518ed8..6ca94e2 100644
--- a/common/console.c
+++ b/common/console.c
@@ -93,9 +93,9 @@ static int console_std_set(struct device_d *dev, struct param_d *param,
if (initialized < CONSOLE_INIT_FULL) {
char ch;
initialized = CONSOLE_INIT_FULL;
- PUTS_LL("Switch to console [");
- PUTS_LL(dev_name(dev));
- PUTS_LL("]\n");
+ puts_ll("Switch to console [");
+ puts_ll(dev_name(dev));
+ puts_ll("]\n");
barebox_banner();
while (kfifo_getc(console_output_fifo, &ch) == 0)
console_putc(CONSOLE_STDOUT, ch);
@@ -286,7 +286,7 @@ void console_putc(unsigned int ch, char c)
case CONSOLE_INITIALIZED_BUFFER:
kfifo_putc(console_output_fifo, c);
- PUTC_LL(c);
+ putc_ll(c);
return;
case CONSOLE_INIT_FULL:
diff --git a/common/console_simple.c b/common/console_simple.c
index 1fe569e..101064b 100644
--- a/common/console_simple.c
+++ b/common/console_simple.c
@@ -28,7 +28,7 @@ EXPORT_SYMBOL(console_puts);
void console_putc(unsigned int ch, char c)
{
if (!console) {
- PUTC_LL(c);
+ putc_ll(c);
return;
}
diff --git a/include/debug_ll.h b/include/debug_ll.h
index f0034ba..ffb7654 100644
--- a/include/debug_ll.h
+++ b/include/debug_ll.h
@@ -20,8 +20,7 @@
#ifndef __INCLUDE_DEBUG_LL_H__
#define __INCLUDE_DEBUG_LL_H__
-#if defined (CONFIG_DEBUG_LL)
-
+#ifdef CONFIG_HAS_DEBUG_LL
/*
* mach/debug_ll.h should implement PUTC_LL. This can be a macro or a static
* inline function. Note that several SoCs expect the UART to be initialized
@@ -29,35 +28,61 @@
* this initialization. Depending on the PUTC_LL implementation the board might
* also hang in PUTC_LL without proper initialization.
*/
-# include <mach/debug_ll.h>
+#include <mach/debug_ll.h>
+#endif
-# define PUTHEX_LL(value) ({ unsigned long v = (unsigned long) (value); \
- int i; unsigned char ch; \
- for (i = 8; i--; ) {\
- ch = ((v >> (i*4)) & 0xf);\
- ch += (ch >= 10) ? 'a' - 10 : '0';\
- PUTC_LL (ch); }})
+#if defined (CONFIG_DEBUG_LL)
+
+static inline void putc_ll(unsigned char value)
+{
+ PUTC_LL(value);
+}
+
+static inline void putxhex_ll(unsigned long value)
+{
+ int i; unsigned char ch;
+
+ for (i = 8; i--; ) {
+ ch = ((value >> (i * 4)) & 0xf);
+ ch += (ch >= 10) ? 'a' - 10 : '0';
+ putc_ll(ch);
+ }
+}
/*
- * Be careful with PUTS_LL, it only works if the binary is running at the
+ * Be careful with puts_ll, it only works if the binary is running at the
* link address which often is not the case during early startup. If in doubt
* don't use it.
*/
-static __inline__ void PUTS_LL(const char * str)
+static inline void puts_ll(const char * str)
{
while (*str) {
- if (*str == '\n') {
- PUTC_LL('\r');
- }
- PUTC_LL(*str);
+ if (*str == '\n')
+ putc_ll('\r');
+
+ putc_ll(*str);
str++;
}
}
#else
-# define PUTC_LL(c) do {} while (0)
-# define PUTHEX_LL(v) do {} while (0)
-# define PUTS_LL(c) do {} while (0)
+
+static inline void putc_ll(unsigned char value)
+{
+}
+
+static inline void putxhex_ll(unsigned long value)
+{
+}
+
+/*
+ * Be careful with puts_ll, it only works if the binary is running at the
+ * link address which often is not the case during early startup. If in doubt
+ * don't use it.
+ */
+static inline void puts_ll(const char * str)
+{
+}
#endif
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 18/22] ARM: beaglebone: Initialize UART for lowlevel debugging
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (16 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 17/22] rework debug_ll Sascha Hauer
@ 2013-08-26 6:55 ` Sascha Hauer
2013-08-26 6:56 ` [PATCH 19/22] ARM: beaglebone: add support for beaglebone black with DDR3 RAM Sascha Hauer
` (3 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:55 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/beaglebone/lowlevel.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boards/beaglebone/lowlevel.c b/arch/arm/boards/beaglebone/lowlevel.c
index 0a32d3b..c0152f3 100644
--- a/arch/arm/boards/beaglebone/lowlevel.c
+++ b/arch/arm/boards/beaglebone/lowlevel.c
@@ -1,6 +1,7 @@
#include <init.h>
#include <sizes.h>
#include <io.h>
+#include <debug_ll.h>
#include <asm/barebox-arm-head.h>
#include <asm/barebox-arm.h>
#include <mach/am33xx-silicon.h>
@@ -93,7 +94,10 @@ static int beaglebone_board_init(void)
am335x_sdram_init(0x18B, &ddr2_cmd_ctrl, &ddr2_regs, &ddr2_data);
+ am33xx_uart0_soft_reset();
am33xx_enable_uart0_pin_mux();
+ omap_uart_lowlevel_init();
+ putc_ll('>');
return 0;
}
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 19/22] ARM: beaglebone: add support for beaglebone black with DDR3 RAM
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (17 preceding siblings ...)
2013-08-26 6:55 ` [PATCH 18/22] ARM: beaglebone: Initialize UART for lowlevel debugging Sascha Hauer
@ 2013-08-26 6:56 ` Sascha Hauer
2013-08-26 6:56 ` [PATCH 20/22] ARM: beaglebone: register sd/emmc with persistent name Sascha Hauer
` (2 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:56 UTC (permalink / raw)
To: barebox
From: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/beaglebone/beaglebone.h | 9 ++++++
arch/arm/boards/beaglebone/board.c | 43 +++++++++++++++++++++++--
arch/arm/boards/beaglebone/lowlevel.c | 56 ++++++++++++++++++++++++++++++---
3 files changed, 102 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/boards/beaglebone/beaglebone.h
diff --git a/arch/arm/boards/beaglebone/beaglebone.h b/arch/arm/boards/beaglebone/beaglebone.h
new file mode 100644
index 0000000..25c5b0e
--- /dev/null
+++ b/arch/arm/boards/beaglebone/beaglebone.h
@@ -0,0 +1,9 @@
+#ifndef __BOARD_BEAGLEBONE_H
+#define __BOARD_BEAGLEBONE_H
+
+static inline int is_beaglebone_black(void)
+{
+ return am33xx_get_cpu_rev() != AM335X_ES1_0;
+}
+
+#endif /* __BOARD_BEAGLEBONE_H */
diff --git a/arch/arm/boards/beaglebone/board.c b/arch/arm/boards/beaglebone/board.c
index e12c70b..9e87afc 100644
--- a/arch/arm/boards/beaglebone/board.c
+++ b/arch/arm/boards/beaglebone/board.c
@@ -26,6 +26,8 @@
#include <init.h>
#include <driver.h>
#include <envfs.h>
+#include <environment.h>
+#include <globalvar.h>
#include <sizes.h>
#include <io.h>
#include <ns16550.h>
@@ -49,6 +51,8 @@
#include <mach/am33xx-generic.h>
#include <mach/cpsw.h>
+#include "beaglebone.h"
+
#ifdef CONFIG_DRIVER_SERIAL_NS16550
/**
@@ -71,7 +75,10 @@ console_initcall(beaglebone_console_init);
static int beaglebone_mem_init(void)
{
- omap_add_ram0(SZ_256M);
+ if (is_beaglebone_black())
+ omap_add_ram0(SZ_512M);
+ else
+ omap_add_ram0(SZ_256M);
return 0;
}
@@ -106,19 +113,51 @@ static struct i2c_board_info i2c0_devices[] = {
},
};
+static const __maybe_unused struct module_pin_mux mmc1_pin_mux[] = {
+ {OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE)}, /* MMC1_DAT0 */
+ {OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE)}, /* MMC1_DAT1 */
+ {OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE)}, /* MMC1_DAT2 */
+ {OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE)}, /* MMC1_DAT3 */
+ {OFFSET(gpmc_ad4), (MODE(1) | RXACTIVE)}, /* MMC1_DAT4 */
+ {OFFSET(gpmc_ad5), (MODE(1) | RXACTIVE)}, /* MMC1_DAT5 */
+ {OFFSET(gpmc_ad6), (MODE(1) | RXACTIVE)}, /* MMC1_DAT6 */
+ {OFFSET(gpmc_ad7), (MODE(1) | RXACTIVE)}, /* MMC1_DAT7 */
+ {OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CLK */
+ {OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */
+ {-1},
+};
+
static int beaglebone_devices_init(void)
{
+ am33xx_enable_mmc0_pin_mux();
am33xx_add_mmc0(NULL);
+ if (is_beaglebone_black()) {
+ configure_module_pin_mux(mmc1_pin_mux);
+ am33xx_add_mmc1(NULL);
+ }
+
am33xx_enable_i2c0_pin_mux();
i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
am33xx_add_i2c0(NULL);
beaglebone_eth_init();
+ return 0;
+}
+device_initcall(beaglebone_devices_init);
+
+static int beaglebone_env_init(void)
+{
+ int black = is_beaglebone_black();
+
+ globalvar_add_simple("board.variant", black ? "boneblack" : "bone");
+
+ printf("detected 'BeagleBone %s'\n", black ? "Black" : "White");
+
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_BEAGLEBONE);
return 0;
}
-device_initcall(beaglebone_devices_init);
+late_initcall(beaglebone_env_init);
diff --git a/arch/arm/boards/beaglebone/lowlevel.c b/arch/arm/boards/beaglebone/lowlevel.c
index c0152f3..2ff7c71 100644
--- a/arch/arm/boards/beaglebone/lowlevel.c
+++ b/arch/arm/boards/beaglebone/lowlevel.c
@@ -14,6 +14,8 @@
#include <mach/am33xx-generic.h>
#include <mach/wdt.h>
+#include "beaglebone.h"
+
#define DDR2_RD_DQS 0x12
#define DDR2_PHY_FIFO_WE 0x80
#define DDR2_WR_DQS 0x00
@@ -68,6 +70,38 @@ static const struct am33xx_ddr_data ddr2_data = {
.dll_lock_diff0 = 0x0,
};
+static const struct am33xx_ddr_data ddr3_data = {
+ .rd_slave_ratio0 = 0x38,
+ .wr_dqs_slave_ratio0 = 0x44,
+ .fifo_we_slave_ratio0 = 0x94,
+ .wr_slave_ratio0 = 0x7D,
+ .use_rank0_delay = 0x01,
+ .dll_lock_diff0 = 0x0,
+};
+
+static const struct am33xx_cmd_control ddr3_cmd_ctrl = {
+ .slave_ratio0 = 0x80,
+ .dll_lock_diff0 = 0x1,
+ .invert_clkout0 = 0x0,
+ .slave_ratio1 = 0x80,
+ .dll_lock_diff1 = 0x1,
+ .invert_clkout1 = 0x0,
+ .slave_ratio2 = 0x80,
+ .dll_lock_diff2 = 0x1,
+ .invert_clkout2 = 0x0,
+};
+
+static const struct am33xx_emif_regs ddr3_regs = {
+ .emif_read_latency = 0x100007,
+ .emif_tim1 = 0x0AAAD4DB,
+ .emif_tim2 = 0x266B7FDA,
+ .emif_tim3 = 0x501F867F,
+ .zq_config = 0x50074BE4,
+ .sdram_config = 0x61C05332,
+ .sdram_config2 = 0x0,
+ .sdram_ref_ctrl = 0xC30,
+};
+
/**
* @brief The basic entry point for board initialization.
*
@@ -90,9 +124,16 @@ static int beaglebone_board_init(void)
if (running_in_sdram())
return 0;
- pll_init(MPUPLL_M_500, 24, DDRPLL_M_266);
-
- am335x_sdram_init(0x18B, &ddr2_cmd_ctrl, &ddr2_regs, &ddr2_data);
+ /* Setup the PLLs and the clocks for the peripherals */
+ if (is_beaglebone_black()) {
+ pll_init(MPUPLL_M_500, 24, DDRPLL_M_400);
+ am335x_sdram_init(0x18B, &ddr3_cmd_ctrl, &ddr3_regs,
+ &ddr3_data);
+ } else {
+ pll_init(MPUPLL_M_500, 24, DDRPLL_M_266);
+ am335x_sdram_init(0x18B, &ddr2_cmd_ctrl, &ddr2_regs,
+ &ddr2_data);
+ }
am33xx_uart0_soft_reset();
am33xx_enable_uart0_pin_mux();
@@ -104,11 +145,18 @@ static int beaglebone_board_init(void)
void __bare_init __naked barebox_arm_reset_vector(uint32_t *data)
{
+ unsigned sdram;
+
am33xx_save_bootinfo(data);
arm_cpu_lowlevel_init();
beaglebone_board_init();
- barebox_arm_entry(0x80000000, SZ_256M, 0);
+ if (is_beaglebone_black())
+ sdram = SZ_512M;
+ else
+ sdram = SZ_256M;
+
+ barebox_arm_entry(0x80000000, sdram, 0);
}
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 20/22] ARM: beaglebone: register sd/emmc with persistent name
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (18 preceding siblings ...)
2013-08-26 6:56 ` [PATCH 19/22] ARM: beaglebone: add support for beaglebone black with DDR3 RAM Sascha Hauer
@ 2013-08-26 6:56 ` Sascha Hauer
2013-08-26 6:56 ` [PATCH 21/22] ARM: beaglebone: update mlo_small defconfig Sascha Hauer
2013-08-26 6:56 ` [PATCH 22/22] ARM: beaglebone: update defconfig Sascha Hauer
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:56 UTC (permalink / raw)
To: barebox
To get persistent names for the sd/emmc cards register them with
a name in platform_data.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/beaglebone/board.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boards/beaglebone/board.c b/arch/arm/boards/beaglebone/board.c
index 9e87afc..dfeb47c 100644
--- a/arch/arm/boards/beaglebone/board.c
+++ b/arch/arm/boards/beaglebone/board.c
@@ -32,6 +32,7 @@
#include <io.h>
#include <ns16550.h>
#include <net.h>
+#include <bootsource.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
#include <mach/am33xx-silicon.h>
@@ -127,14 +128,29 @@ static const __maybe_unused struct module_pin_mux mmc1_pin_mux[] = {
{-1},
};
+static struct omap_hsmmc_platform_data beaglebone_sd = {
+ .devname = "sd",
+};
+
+static struct omap_hsmmc_platform_data beaglebone_emmc = {
+ .devname = "emmc",
+};
+
static int beaglebone_devices_init(void)
{
am33xx_enable_mmc0_pin_mux();
- am33xx_add_mmc0(NULL);
+ am33xx_add_mmc0(&beaglebone_sd);
if (is_beaglebone_black()) {
configure_module_pin_mux(mmc1_pin_mux);
- am33xx_add_mmc1(NULL);
+ am33xx_add_mmc1(&beaglebone_emmc);
+ }
+
+ if (bootsource_get() == BOOTSOURCE_MMC) {
+ if (bootsource_get_instance() == 0)
+ omap_set_bootmmc_devname("sd");
+ else
+ omap_set_bootmmc_devname("emmc");
}
am33xx_enable_i2c0_pin_mux();
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 21/22] ARM: beaglebone: update mlo_small defconfig
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (19 preceding siblings ...)
2013-08-26 6:56 ` [PATCH 20/22] ARM: beaglebone: register sd/emmc with persistent name Sascha Hauer
@ 2013-08-26 6:56 ` Sascha Hauer
2013-08-26 6:56 ` [PATCH 22/22] ARM: beaglebone: update defconfig Sascha Hauer
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:56 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/configs/am335x_beaglebone_mlo_small_defconfig | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig b/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
index 886dad9..ea29c24 100644
--- a/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
+++ b/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
@@ -9,11 +9,9 @@ CONFIG_THUMB2_BAREBOX=y
CONFIG_ENVIRONMENT_VARIABLES=y
CONFIG_MMU=y
CONFIG_TEXT_BASE=0x402F0400
-CONFIG_MEMORY_LAYOUT_FIXED=y
-CONFIG_STACK_BASE=0x4030B800
CONFIG_STACK_SIZE=0x1600
-CONFIG_MALLOC_BASE=0x8F000000
CONFIG_MALLOC_SIZE=0x1000000
+CONFIG_MALLOC_TLSF=y
CONFIG_PROMPT="MLO>"
CONFIG_SHELL_NONE=y
# CONFIG_ERRNO_MESSAGES is not set
@@ -23,7 +21,7 @@ CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
# CONFIG_SPI is not set
CONFIG_MCI=y
-CONFIG_MCI_STARTUP=y
+# CONFIG_MCI_WRITE is not set
CONFIG_MCI_OMAP_HSMMC=y
# CONFIG_FS_RAMFS is not set
# CONFIG_FS_DEVFS is not set
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH 22/22] ARM: beaglebone: update defconfig
2013-08-26 6:55 [PATCH] am33xx beaglebone and related Sascha Hauer
` (20 preceding siblings ...)
2013-08-26 6:56 ` [PATCH 21/22] ARM: beaglebone: update mlo_small defconfig Sascha Hauer
@ 2013-08-26 6:56 ` Sascha Hauer
21 siblings, 0 replies; 24+ messages in thread
From: Sascha Hauer @ 2013-08-26 6:56 UTC (permalink / raw)
To: barebox
- compile in thumb2 mode for a smaller binary
- increase TEXT_BASE to get more memory space
- set malloc size to zero for autodetection
- enable some more commands
- disable MCI_STARTUP, it's no longer needed and saves some time
during boot
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/configs/am335x_beaglebone_defconfig | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/arch/arm/configs/am335x_beaglebone_defconfig b/arch/arm/configs/am335x_beaglebone_defconfig
index 4e37e01..4bcee24 100644
--- a/arch/arm/configs/am335x_beaglebone_defconfig
+++ b/arch/arm/configs/am335x_beaglebone_defconfig
@@ -1,10 +1,13 @@
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_AM33XX=y
-CONFIG_AEABI=y
+CONFIG_THUMB2_BAREBOX=y
+CONFIG_CMD_ARM_MMUINFO=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_ARM_UNWIND=y
CONFIG_MMU=y
-CONFIG_TEXT_BASE=0x81000000
+CONFIG_TEXT_BASE=0x8f000000
+CONFIG_MALLOC_SIZE=0x0
+CONFIG_MALLOC_TLSF=y
CONFIG_KALLSYMS=y
CONFIG_PROMPT="barebox> "
CONFIG_LONGHELP=y
@@ -25,14 +28,13 @@ CONFIG_CMD_READLINE=y
CONFIG_CMD_MENU=y
CONFIG_CMD_MENU_MANAGEMENT=y
CONFIG_CMD_TIME=y
-CONFIG_CMD_DIRNAME=y
CONFIG_CMD_LN=y
-CONFIG_CMD_READLINK=y
CONFIG_CMD_TFTP=y
CONFIG_CMD_FILETYPE=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_IOMEM=y
+CONFIG_CMD_MM=y
CONFIG_CMD_CRC=y
CONFIG_CMD_CRC_CMP=y
CONFIG_CMD_MD5SUM=y
@@ -45,13 +47,17 @@ CONFIG_CMD_UIMAGE=y
CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
CONFIG_CMD_OFTREE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OF_NODE=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_I2C=y
CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_DETECT=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_PING=y
@@ -61,8 +67,9 @@ CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
CONFIG_DRIVER_NET_CPSW=y
# CONFIG_SPI is not set
+CONFIG_I2C=y
+CONFIG_I2C_OMAP=y
CONFIG_MCI=y
-CONFIG_MCI_STARTUP=y
CONFIG_MCI_OMAP_HSMMC=y
CONFIG_FS_TFTP=y
CONFIG_FS_NFS=y
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 24+ messages in thread