[PATCH 4/5] atmel_serial: add rs485 support

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/serial/atmel.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/serial/atmel.c b/drivers/serial/atmel.c
index 89c141e..40945c9 100644
--- a/drivers/serial/atmel.c
+++ b/drivers/serial/atmel.c
@@ -362,6 +362,32 @@ static int atmel_serial_setbaudrate(struct console_device *cdev, int baudrate)
 	return 0;
 }
 
+static int atmel_serial_set_mode(struct console_device *cdev, enum console_mode mode)
+{
+	struct atmel_uart_port *uart = to_atmel_uart_port(cdev);
+	u32 mr;
+	u8 m;
+
+	mr = readl(uart->base + USART3_MR);
+	mr &= ~0xf;
+
+	switch (mode) {
+	case CONSOLE_MODE_NORMAL:
+		m = USART3_USART_MODE_NORMAL;
+		break;
+	case CONSOLE_MODE_RS485:
+		m = USART3_USART_MODE_RS485;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mr |= USART3_BF(USART_MODE, m);
+	writel(mr, uart->base + USART3_MR);
+
+	return 0;
+}
+
 /*
  * Initialise the serial port with the given baudrate. The settings
  * are always 8 data bits, no parity, 1 stop bit, no start bits.
@@ -404,6 +430,7 @@ static int atmel_serial_probe(struct device_d *dev)
 	cdev->putc = atmel_serial_putc;
 	cdev->getc = atmel_serial_getc;
 	cdev->setbrg = atmel_serial_setbaudrate;
+	cdev->set_mode = atmel_serial_set_mode;
 
 	atmel_serial_init_port(cdev);
 
-- 
1.8.4.rc1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox