From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 2/3] misc: add somfy bootcount support
Date: Fri, 20 Sep 2013 06:46:16 +0200 [thread overview]
Message-ID: <1379652377-20276-2-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1379652377-20276-1-git-send-email-plagnioj@jcrosoft.com>
we support different boot mode
- normal
- normal_forced
- update
- rescue
- usb
- network
- test
each of them need to be checked this will allow to decide what is the next
boot mode during the boot sequence
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
drivers/misc/Kconfig | 4 ++
drivers/misc/Makefile | 1 +
drivers/misc/somfy_bootcount.c | 138 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 143 insertions(+)
create mode 100644 drivers/misc/somfy_bootcount.c
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index a972ba4..44b7af0 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -18,4 +18,8 @@ config JTAG
config BOOTCOUNT
bool
+config SOMFY_BOOTCOUNT
+ tristate "Somfy Boot Count"
+ select BOOTCOUNT
+
endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index fa668c1..4e2e6cc 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_JTAG) += jtag.o
obj-$(CONFIG_BOOTCOUNT) += bootcount.o
+obj-$(CONFIG_SOMFY_BOOTCOUNT) += somfy_bootcount.o
diff --git a/drivers/misc/somfy_bootcount.c b/drivers/misc/somfy_bootcount.c
new file mode 100644
index 0000000..3771ab7
--- /dev/null
+++ b/drivers/misc/somfy_bootcount.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * GPLv2 Only
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <io.h>
+#include <errno.h>
+#include <bootcount.h>
+
+#define SOMFY_BOOTCOUNT_UPDATE (0x5550) << 16
+#define SOMFY_BOOTCOUNT_RESCUE (0x5245) << 16
+#define SOMFY_BOOTCOUNT_USB (0x5542) << 16
+#define SOMFY_BOOTCOUNT_NETWORK (0x4E54) << 16
+#define SOMFY_BOOTCOUNT_TEST (0x5445) << 16
+#define SOMFY_BOOTCOUNT_NORMAL (0xb001) << 16
+#define SOMFY_BOOTCOUNT_NORMAL_FORCED (0xb002) << 16
+
+static u32 somfy_boot_mode_mask[] = {
+ SOMFY_BOOTCOUNT_NORMAL,
+ SOMFY_BOOTCOUNT_NORMAL_FORCED,
+ SOMFY_BOOTCOUNT_UPDATE,
+ SOMFY_BOOTCOUNT_RESCUE,
+ SOMFY_BOOTCOUNT_USB,
+ SOMFY_BOOTCOUNT_NETWORK,
+ SOMFY_BOOTCOUNT_TEST,
+};
+
+static const char *somfy_boot_modes[] = {
+ "normal",
+ "normal_forced",
+ "update",
+ "rescue",
+ "usb",
+ "network",
+ "test",
+};
+
+struct somfy_bootcount {
+ struct device_d *dev;
+ int mode;
+ int count;
+ void __iomem *base;
+ struct bootcount_driver drv;
+};
+
+static void somfy_bootcount_set(struct somfy_bootcount *sb)
+{
+ u32 val;
+
+ val = somfy_boot_mode_mask[sb->mode] | (sb->count & 0xffff);
+
+ writel(val, sb->base);
+}
+
+static int somfy_bootcount_mode_set(struct param_d *p, void *priv)
+{
+ struct somfy_bootcount *sb = priv;
+
+ sb->count = 0;
+ somfy_bootcount_set(sb);
+
+ return 0;
+}
+
+static int somfy_bootcount_count_set(struct param_d *p, void *priv)
+{
+ struct somfy_bootcount *sb = priv;
+
+ somfy_bootcount_set(sb);
+
+ return 0;
+}
+
+static void somfy_bootcount_parse(struct somfy_bootcount *sb)
+{
+ u32 val;
+ int i;
+
+ val = readl(sb->base);
+
+ for (i = 0; i < ARRAY_SIZE(somfy_boot_mode_mask); i++) {
+ u32 mask = somfy_boot_mode_mask[i];
+
+ if ((val & 0xffff0000) == mask)
+ goto found;
+ }
+
+ return;
+
+found:
+ sb->mode = i;
+ sb->count = val & 0xffff;
+}
+
+static void somfy_bootcount_inc(struct bootcount_driver *d)
+{
+ struct somfy_bootcount *sb = d->priv;
+
+ sb->count++;
+ somfy_bootcount_set(sb);
+}
+
+
+static int somfy_bootcount_probe(struct device_d *dev)
+{
+ struct somfy_bootcount *sb;
+
+ sb = xzalloc(sizeof(*sb));
+ sb->base = dev_request_mem_region(dev, 0);
+ sb->dev = dev;
+
+ sb->drv.priv = sb;
+ sb->drv.inc = somfy_bootcount_inc;
+ bootcount_register(&sb->drv);
+ somfy_bootcount_parse(sb);
+
+ dev_add_param_int(dev, "count", somfy_bootcount_count_set,
+ NULL, &sb->count, "%d", sb);
+ dev_add_param_enum(dev, "mode", somfy_bootcount_mode_set,
+ NULL, &sb->mode, somfy_boot_modes, ARRAY_SIZE(somfy_boot_modes), sb);
+
+ return 0;
+}
+
+static struct driver_d somfy_bootcount_driver = {
+ .name = "somfy_bootcount",
+ .probe = somfy_bootcount_probe,
+};
+
+static int somfy_bootcount_init(void)
+{
+ return platform_driver_register(&somfy_bootcount_driver);
+}
+postcore_initcall(somfy_bootcount_init);
--
1.8.4.rc1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-09-20 4:45 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-20 4:45 [PATCH 0/3] introduce " Jean-Christophe PLAGNIOL-VILLARD
2013-09-20 4:46 ` [PATCH 1/3] misc: add bootcount framework Jean-Christophe PLAGNIOL-VILLARD
2013-09-20 4:46 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-09-20 4:46 ` [PATCH 3/3] animeo_ip: add bootcount support Jean-Christophe PLAGNIOL-VILLARD
2013-09-20 7:23 ` [PATCH 1/3] misc: add bootcount framework Sascha Hauer
2013-09-20 8:01 ` Jean-Christophe PLAGNIOL-VILLARD
2013-09-20 12:39 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379652377-20276-2-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox