[PATCH 7/8] serial: amba-pl011: add start and shutdown support

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/serial/amba-pl011.c | 45 +++++++++++++++++++++++++++++++++------------
 1 file changed, 33 insertions(+), 12 deletions(-)

diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index fc7723e..5a8e633 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -147,14 +147,41 @@ static void pl011_rlcr(struct amba_uart_port *uart, u32 lcr)
 	}
 }
 
-int pl011_init_port (struct console_device *cdev)
+static void pl011_shutdown(struct console_device *cdev)
+{
+	struct amba_uart_port *uart = to_amba_uart_port(cdev);
+
+	writel(0x0, uart->base + UART011_CR);
+
+	clk_disable(uart->clk);
+}
+
+static int pl011_startup(struct console_device *cdev)
+{
+	struct amba_uart_port *uart = to_amba_uart_port(cdev);
+
+	/*
+	 * Try to enable the clock producer.
+	 */
+	clk_enable(uart->clk);
+
+	/*
+	 ** Finally, enable the UART
+	 */
+	writel((UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE | UART011_CR_RTS),
+	       uart->base + UART011_CR);
+
+	return 0;
+}
+
+static void pl011_port_init(struct console_device *cdev)
 {
 	struct amba_uart_port *uart = to_amba_uart_port(cdev);
 
 	/*
 	 ** First, disable everything.
 	 */
-	writel(0x0, uart->base + UART011_CR);
+	pl011_shutdown(cdev);
 
 	/*
 	 * Try to enable the clock producer.
@@ -168,13 +195,7 @@ int pl011_init_port (struct console_device *cdev)
 	 */
 	pl011_rlcr(uart, UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN);
 
-	/*
-	 ** Finally, enable the UART
-	 */
-	writel((UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE | UART011_CR_RTS),
-	       uart->base + UART011_CR);
-
-	return 0;
+	clk_disable(uart->clk);
 }
 
 static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
@@ -192,14 +213,14 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 
 	cdev = &uart->uart;
 	cdev->dev = &dev->dev;
+	cdev->startup = pl011_startup;
+	cdev->shutdown = pl011_shutdown;
 	cdev->tstc = pl011_tstc;
 	cdev->putc = pl011_putc;
 	cdev->getc = pl011_getc;
 	cdev->setbrg = pl011_setbaudrate;
 
-	pl011_init_port(cdev);
-
-	/* Enable UART */
+	pl011_port_init(cdev);
 
 	console_register(cdev);
 
-- 
1.8.4.rc3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox