Re: /dev/disk0 vs /dev/mmc0

[Lucas Stach <l.stach@pengutronix.de>]

Am Dienstag, den 08.10.2013, 09:02 +0200 schrieb David Jander:
> On Mon, 7 Oct 2013 22:19:36 +0200
> Sascha Hauer <s.hauer@pengutronix.de> wrote:
> 
> > On Mon, Oct 07, 2013 at 11:57:35AM +0200, David Jander wrote:
> > > On Mon, 7 Oct 2013 08:41:11 +0200
> > > Sascha Hauer <s.hauer@pengutronix.de> wrote:
> > > 
> > > > On Mon, Oct 07, 2013 at 08:32:03AM +0200, David Jander wrote:
> > > > > 
> > > > > Dear Sascha,
> > > > > 
> > > > > On Sun, 6 Oct 2013 12:39:50 +0200
> > > > > Sascha Hauer <s.hauer@pengutronix.de> wrote:
> > > > > > 
> > > > > > It doesn't interfere with the kernel. The kernel currently ignores
> > > > > > this aliases. There are patches floating to let the kernel honor this
> > > > > > aliases, but then they should simply have the same effect as they
> > > > > > have in barebox.
> > > > > 
> > > > > That doesn't _feel_ right. Changing standard device names in Linux via
> > > > > aliases in the DT might be a fancy idea, but it'd have a different
> > > > > reason/use-case than in the case of barebox. IMHO using the same DT for
> > > > > both seems to be the Right Thing (tm) to do, but then the semantics
> > > > > must be the same also. If I need aliases in the DT only to be able to
> > > > > tell devices apart from each other in barebox, while in Linux the
> > > > > effect would only be a rather inconvenient renaming of devices with no
> > > > > other added value, I think we need a different way to differentiate
> > > > > devices in barebox. Why not just use a simple driver-provided prefix
> > > > > (mci, mmc, usb, sata, etc...) for now?
> > > > 
> > > > That's not enough. We also need a fixed numbering. Otherwise a
> > > > nonremovable eMMC and a removable SD card change their device names
> > > > depending on the detect order.
> > > 
> > > True. Can host->dev.id be used? Should be fixed AFAICS...
> > 
> > host->dev.id depends on the probe order.
> 
> :-(
> 
> > > > Using aliases to provide a numbering is done in the Kernel aswell at
> > > > least for gpios, uarts and i2c busses, so expanding this scheme to
> > > > mmc/sd slots doesn't feel too wrong to me.
> > > 
> > > Yes, but we are doing it in barebox now only because there is no other way
> > > to tell devices apart from each other. While the MMC device being called
> > > "mmcblk0" or whatever in Linux is perfectly fine (no need for alias),
> > 
> > Linux has exactly the same problem. There are enough systems on which
> > the eMMC changes its name depending on a SD card being plugged in or
> > not.
> 
> Yes, but you have udev/mdev hotplugging and the sysfs interface to figure out
> what you need to know. Barebox has nothing like that AFAICS.
> 
> > > in
> > > barebox the device is now named "disk0", and there is no way of knowing
> > > what "disk0" actually is. Using DT-aliases for that purpose seems wrong to
> > > me. Why was this changed anyway? Introduction of some common "disk" layer
> > > (like scsi-disk on Linux)? Or just for the sake of confusing it with other
> > > "disk"-like devices?
> > 
> > It has always been diskx on barebox, this behaviour hasn't changed.
> 
> You are right. Sorry for the confusion. There were aliases in barebox's
> version of imx53.dtsi which went missing somehow in my tree. I have been
> merging stuff from mainline Linux....
> That leads me to the question: What is the intended relationship between
> barebox and Linux kernel DTS files? Which one is supposed to be the "master" or
> "upstream" version? Aren't they supposed to be kept in sync somehow? At least
> the basic SoC-specific .dtsi files?
> 
Missing other options we regard the Linux DTs as the upstream. Ideally
DTs should be stored in a separate repo, so they don't get broken
unnecessarily.

We will try to keep the Barebox DTs in sync with Linux as much as
possible. But even then there is no guarantee that Barebox and Linux DTs
don't drift away from each other over time.
If a binding gets broken (let's hope that everyone gets their act
together and don't do this anymore), it will require code changes and
maintenance work to get things in sync again.

Another real-life use-case where you might end up with different DTs is
if you update your Linux kernel more regularly than the Barebox on your
device. So please if ever possible don't boot the Linux kernel with the
builtin Barebox DT, but design your boot concept in a way that you
always deliver a DTB fitting your kernel.

Regards,
Lucas

-- 
Pengutronix e.K.                           | Lucas Stach                 |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-5076 |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox