From: Andre Heider <a.heider@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH 4/6] video: add a simple framebuffer driver
Date: Thu, 24 Oct 2013 22:23:44 +0200 [thread overview]
Message-ID: <1382646226-24871-5-git-send-email-a.heider@gmail.com> (raw)
In-Reply-To: <1382646226-24871-1-git-send-email-a.heider@gmail.com>
This architecture independend driver implements a framebuffer driver
based on a raw memory region that may be rendered to.
It is the counterpart of the kernel driver with the same name.
Platforms can configure display devices to scan out from such a memory
region and set it up with a single function call.
Doing so provides a framebuffer driver for barebox and a configuration
of the corresponding kernel driver through device tree.
Signed-off-by: Andre Heider <a.heider@gmail.com>
---
drivers/video/Kconfig | 12 +++
drivers/video/Makefile | 1 +
drivers/video/simplefb.c | 224 +++++++++++++++++++++++++++++++++++++++++++++++
include/video/simplefb.h | 21 +++++
4 files changed, 258 insertions(+)
create mode 100644 drivers/video/simplefb.c
create mode 100644 include/video/simplefb.h
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0639d9c..9afa7e8 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -71,4 +71,16 @@ config DRIVER_VIDEO_PXA
Add support for the frame buffer device found on the PXA270
CPU.
+config DRIVER_VIDEO_SIMPLEFB
+ bool "Simple framebuffer support"
+ depends on OFTREE
+ depends on ARCH_BCM2835
+ help
+ Say Y if you want support for a simple frame-buffer.
+
+ This driver provides the framebuffer configuration to the kernel
+ through device tree.
+
+ The corresponding kernel driver has to be enabled to use this feature.
+
endif
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 67169d1..0da7c2b 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_DRIVER_VIDEO_S3C24XX) += s3c24xx.o
obj-$(CONFIG_DRIVER_VIDEO_PXA) += pxa.o
obj-$(CONFIG_DRIVER_VIDEO_SDL) += sdl.o
obj-$(CONFIG_DRIVER_VIDEO_OMAP) += omap.o
+obj-$(CONFIG_DRIVER_VIDEO_SIMPLEFB) += simplefb.o
diff --git a/drivers/video/simplefb.c b/drivers/video/simplefb.c
new file mode 100644
index 0000000..f096c36
--- /dev/null
+++ b/drivers/video/simplefb.c
@@ -0,0 +1,224 @@
+/*
+ * SimpleFB driver
+ *
+ * Copyright (C) 2013 Andre Heider
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <errno.h>
+#include <malloc.h>
+#include <xfuncs.h>
+#include <common.h>
+#include <init.h>
+#include <stdio.h>
+#include <driver.h>
+#include <fb.h>
+
+#include <video/simplefb.h>
+
+struct simplefb_platform_data {
+ u32 width;
+ u32 height;
+ u32 stride;
+ enum simplefb_format format;
+ struct fb_info fbi;
+ struct fb_videomode mode;
+};
+
+struct device_d *add_simplefb_device(u32 width, u32 height, u32 stride,
+ enum simplefb_format format,
+ resource_size_t start,
+ resource_size_t size)
+{
+ struct simplefb_platform_data *pdata;
+ struct device_d *dev;
+
+ pdata = xzalloc(sizeof *pdata);
+ pdata->width = width;
+ pdata->height = height;
+ pdata->stride = stride;
+ pdata->format = format;
+
+ dev = add_generic_device("simplefb", DEVICE_ID_SINGLE,
+ NULL, start, size,
+ IORESOURCE_MEM, pdata);
+
+ if (!dev)
+ free(pdata);
+
+ return dev;
+}
+
+struct simplefb_info {
+ enum simplefb_format id;
+ const char *compatible;
+ u32 bpp;
+ struct fb_bitfield red;
+ struct fb_bitfield green;
+ struct fb_bitfield blue;
+};
+
+/*
+ * These values have to match the kernel's simplefb driver.
+ * See Documentation/devicetree/bindings/video/simple-framebuffer.txt
+ */
+static const struct simplefb_info simplefb_infos[] = {
+ {
+ .id = SIMPLEFB_R5G6B5,
+ .compatible = "r5g6b5",
+ .bpp = 16,
+ .red = { .length = 5, .offset = 11 },
+ .green = { .length = 6, .offset = 5 },
+ .blue = { .length = 5, .offset = 0 },
+ },
+};
+
+static const struct simplefb_info *simplefb_get_info(enum simplefb_format id)
+{
+ u32 i;
+
+ for (i = 0; i < ARRAY_SIZE(simplefb_infos); ++i)
+ if (simplefb_infos[i].id == id)
+ return &simplefb_infos[i];
+
+ return NULL;
+}
+
+static int simplefb_create_node(struct device_node *root,
+ const struct simplefb_platform_data *pdata,
+ const struct resource *res)
+{
+ const char compat[] = "simple-framebuffer";
+ const char disabled[] = "disabled";
+ const char okay[] = "okay";
+ const struct simplefb_info *info;
+ struct device_node *node;
+ u32 cells[2];
+ int ret;
+
+ info = simplefb_get_info(pdata->format);
+ if (!info)
+ return -EINVAL;
+
+ node = of_create_node(root, "/framebuffer");
+ if (!node)
+ return -ENOMEM;
+
+ ret = of_set_property(node, "status", disabled,
+ strlen(disabled) + 1, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = of_set_property(node, "compatible", compat, sizeof(compat), 1);
+ if (ret)
+ return ret;
+
+ cells[0] = cpu_to_be32(res->start);
+ cells[1] = cpu_to_be32(resource_size(res));
+ ret = of_set_property(node, "reg", cells, sizeof(cells[0]) * 2, 1);
+ if (ret < 0)
+ return ret;
+
+ cells[0] = cpu_to_be32(pdata->width);
+ ret = of_set_property(node, "width", cells, sizeof(cells[0]), 1);
+ if (ret < 0)
+ return ret;
+
+ cells[0] = cpu_to_be32(pdata->height);
+ ret = of_set_property(node, "height", cells, sizeof(cells[0]), 1);
+ if (ret < 0)
+ return ret;
+
+ cells[0] = cpu_to_be32(pdata->stride);
+ ret = of_set_property(node, "stride", cells, sizeof(cells[0]), 1);
+ if (ret < 0)
+ return ret;
+
+ ret = of_set_property(node, "format", info->compatible,
+ strlen(info->compatible) + 1, 1);
+ if (ret < 0)
+ return ret;
+
+ return of_set_property(node, "status", okay, strlen(okay) + 1, 1);
+}
+
+static int simplefb_of_fixup(struct device_node *root)
+{
+ struct device_d *dev;
+ struct simplefb_platform_data *pdata;
+ struct resource *res;
+
+ dev = get_device_by_name("simplefb");
+ if (!dev)
+ return 0;
+
+ pdata = dev->platform_data;
+ if (!pdata)
+ return 0;
+
+ res = dev_get_resource(dev, 0);
+ if (!res)
+ return 0;
+
+ simplefb_create_node(root, pdata, res);
+
+ return 0;
+}
+
+static void simplefb_enable(struct fb_info *info)
+{
+}
+
+static void simplefb_disable(struct fb_info *info)
+{
+}
+
+static struct fb_ops simplefb_ops = {
+ .fb_enable = simplefb_enable,
+ .fb_disable = simplefb_disable,
+};
+
+static int simplefb_probe(struct device_d *dev)
+{
+ struct simplefb_platform_data *pdata = dev->platform_data;
+ const struct simplefb_info *info;
+ struct resource *res;
+ int ret;
+
+ info = simplefb_get_info(pdata->format);
+ if (!info)
+ return -EINVAL;
+
+ res = dev_get_resource(dev, 0);
+ if (!res)
+ return -EINVAL;
+
+ pdata->fbi.fbops = &simplefb_ops;
+ pdata->fbi.screen_base = (void *)res->start;
+ pdata->fbi.xres = pdata->width;
+ pdata->fbi.yres = pdata->height;
+ pdata->fbi.bits_per_pixel = info->bpp;
+ pdata->fbi.stride = pdata->stride;
+ pdata->fbi.red = info->red;
+ pdata->fbi.green = info->green;
+ pdata->fbi.blue = info->blue;
+
+ pdata->fbi.mode = &pdata->mode;
+ pdata->fbi.mode->xres = pdata->width;
+ pdata->fbi.mode->yres = pdata->height;
+
+ ret = register_framebuffer(&pdata->fbi);
+ if (ret < 0)
+ return ret;
+
+ of_register_fixup(simplefb_of_fixup);
+
+ return 0;
+}
+
+static struct driver_d simplefb_driver = {
+ .name = "simplefb",
+ .probe = simplefb_probe,
+};
+device_platform_driver(simplefb_driver);
diff --git a/include/video/simplefb.h b/include/video/simplefb.h
new file mode 100644
index 0000000..5949046
--- /dev/null
+++ b/include/video/simplefb.h
@@ -0,0 +1,21 @@
+/*
+ * SimpleFB driver
+ *
+ * Copyright (C) 2013 Andre Heider
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef SIMPLEFB_H
+#define SIMPLEFB_H
+
+enum simplefb_format {
+ SIMPLEFB_R5G6B5
+};
+
+struct device_d *add_simplefb_device(u32 width, u32 height, u32 stride,
+ enum simplefb_format format,
+ resource_size_t start,
+ resource_size_t size);
+
+#endif
--
1.8.3.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-10-24 20:24 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-24 20:23 [PATCH 0/6] simple framebuffer driver with RPi support Andre Heider
2013-10-24 20:23 ` [PATCH 1/6] fb: add a stride value to struct fb_info Andre Heider
2013-10-25 10:58 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-25 11:51 ` Andre Heider
2013-10-25 23:04 ` Sascha Hauer
2013-10-24 20:23 ` [PATCH 2/6] gui: convert graphic utils to respect the stride value Andre Heider
2013-10-24 20:23 ` [PATCH 3/6] gui: convert the bmp renderer " Andre Heider
2013-10-24 20:23 ` Andre Heider [this message]
2013-10-24 20:23 ` [PATCH 5/6] ARM: bcm2835: add missing mbox overscan response field Andre Heider
2013-10-24 20:23 ` [PATCH 6/6] ARM: rpi: add support for simplefb Andre Heider
2013-10-25 7:56 ` [PATCH 0/6] simple framebuffer driver with RPi support Andre Heider
2013-10-25 23:51 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382646226-24871-5-git-send-email-a.heider@gmail.com \
--to=a.heider@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox