mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Rostislav Lisovy <lisovy@gmail.com>
To: barebox@lists.infradead.org
Cc: Rostislav Lisovy <lisovy@gmail.com>, pisa@cmp.felk.cvut.cz
Subject: [PATCH 0/3] Support for Voipac X53-DMM-668 module and Voipac Baseboard
Date: Tue,  5 Nov 2013 15:42:04 +0100	[thread overview]
Message-ID: <1383662527-8538-1-git-send-email-lisovy@gmail.com> (raw)

The first patch modifies the general imx53.dtsi file. The reason is to
make it possible to add Devicetree definition for the board (later in
this patch) as a copy from the Linux kernel -- such a DTS can be used
also to boot Linux kernel.
I am not sure if this should be in a separate patch or if this file
(imx53.dtsi) is being regularly mirrored from the Linux kernel.

The second patch modifies the IMX FEC driver to make it possible to
parse the gpio reset pin from the Devicetree and perform the reset in
the driver (thus saving unnecessary code duplication in different
board.c files). The added code is very similar to one in Linux kernel
driver.

The 3rd patch adds the Devicetree definition for the Voipac
x53-dmm-668 module (equipped with i.mx53 CPU) and Voipac Baseboard.
More info about the module might be found at:
http://www.voipac.com/#X53-DMM-668
The DTS files have already been accepted to Linux kernel (waiting in
linux-next). The rest is the necessary hardware initialization etc.  The
devices successfully initialized (and tested) are uart0 and Ethernet.

Rostislav Lisovy (3):
  ARM: dts: i.mx53: Internal keyboard controller + i2c pinmux
  ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree
  ARM: i.mx53: Support for Voipac board. Device definition is read from
    Devicetree

 arch/arm/boards/Makefile                           |    1 +
 arch/arm/boards/freescale-mx53-vmx53/Makefile      |    3 +
 arch/arm/boards/freescale-mx53-vmx53/board.c       |   42 +++++
 arch/arm/boards/freescale-mx53-vmx53/env/config    |   46 +++++
 .../arm/boards/freescale-mx53-vmx53/flash_header.c |  103 ++++++++++
 arch/arm/boards/freescale-mx53-vmx53/lowlevel.c    |    9 +
 arch/arm/dts/Makefile                              |    4 +-
 arch/arm/dts/imx53-voipac-bsb.dts                  |  135 ++++++++++++++
 arch/arm/dts/imx53-voipac-dmm-668.dtsi             |  196 ++++++++++++++++++++
 arch/arm/dts/imx53.dtsi                            |   15 ++
 arch/arm/mach-imx/Kconfig                          |    9 +
 drivers/net/fec_imx.c                              |   21 +++
 12 files changed, 583 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/Makefile
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/board.c
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/env/config
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/flash_header.c
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/lowlevel.c
 create mode 100644 arch/arm/dts/imx53-voipac-bsb.dts
 create mode 100644 arch/arm/dts/imx53-voipac-dmm-668.dtsi

-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2013-11-05 14:42 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-05 14:42 Rostislav Lisovy [this message]
2013-11-05 14:42 ` [PATCH 1/3] ARM: dts: i.mx53: Internal keyboard controller + i2c pinmux Rostislav Lisovy
2013-11-05 14:42 ` [PATCH 2/3] ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree Rostislav Lisovy
2013-11-05 16:15   ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-05 19:11     ` Pavel Pisa
2013-11-06  8:39       ` Sascha Hauer
2013-11-05 14:42 ` [PATCH 3/3] ARM: i.mx53: Support for Voipac board. Device definition is read " Rostislav Lisovy
2013-11-08  8:42   ` Sascha Hauer
2013-11-09 22:14     ` Rostislav Lisovy
2013-11-11  9:54       ` Sascha Hauer
2013-11-12 22:57         ` Rostislav Lisovy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1383662527-8538-1-git-send-email-lisovy@gmail.com \
    --to=lisovy@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=pisa@cmp.felk.cvut.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox