* howto load/save envfs from linux
@ 2013-11-07 9:08 zzs
2013-11-07 9:19 ` Jan Lübbe
0 siblings, 1 reply; 2+ messages in thread
From: zzs @ 2013-11-07 9:08 UTC (permalink / raw)
To: barebox
My final user program is a linux program, It want to change
mac address of eth.
So I must read and write back the data saved in envfs.
Howto do that?
--
Best Regards,
zzs
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: howto load/save envfs from linux
2013-11-07 9:08 howto load/save envfs from linux zzs
@ 2013-11-07 9:19 ` Jan Lübbe
0 siblings, 0 replies; 2+ messages in thread
From: Jan Lübbe @ 2013-11-07 9:19 UTC (permalink / raw)
To: zzs; +Cc: barebox
On Thu, 2013-11-07 at 17:08 +0800, zzs wrote:
> My final user program is a linux program, It want to change
> mac address of eth.
>
> So I must read and write back the data saved in envfs.
>
> Howto do that?
You can enable compilation of the bareboxenv tool in menuconfig. That
tool can read and write the envfs format from userspace.
Regards,
Jan
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-11-07 9:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-11-07 9:08 howto load/save envfs from linux zzs
2013-11-07 9:19 ` Jan Lübbe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox