From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 03/17] spi: omap: encode register offset into device_id
Date: Fri, 22 Nov 2013 15:48:47 +0100 [thread overview]
Message-ID: <1385131741-28280-4-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1385131741-28280-1-git-send-email-s.hauer@pengutronix.de>
The omap3 and omap4/am33xx spi cores differ in the offset of the
registers in the address space. Instead of encoding this into the
resources use the platform_device_id mechanism. This is done in
preparation for devicetree probe support where the address space
is in the devicetree and can't be adjusted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/am33xx-devices.h | 2 +-
drivers/spi/omap3_spi.c | 38 ++++++++++++++++++++++--
drivers/spi/omap3_spi.h | 6 +++-
3 files changed, 42 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap/include/mach/am33xx-devices.h b/arch/arm/mach-omap/include/mach/am33xx-devices.h
index 6691980..d2411a4 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-devices.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-devices.h
@@ -45,7 +45,7 @@ static inline struct device_d *am33xx_add_cpsw(struct cpsw_platform_data *cpsw_d
static inline struct device_d *am33xx_add_spi(int id, resource_size_t start)
{
- return add_generic_device("omap3_spi", id, NULL, start + 0x100, SZ_4K - 0x100,
+ return add_generic_device("omap4-spi", id, NULL, start, SZ_4K,
IORESOURCE_MEM, NULL);
}
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index 5c8cc88..136fc18 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -49,6 +49,10 @@
#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */
#define SPI_XFER_END 0x02 /* Deassert CS after transfer */
+struct omap_spi_drvdata {
+ unsigned register_offset;
+};
+
static void spi_reset(struct spi_master *master)
{
struct omap3_spi_master *omap3_master = container_of(master, struct omap3_spi_master, master);
@@ -343,6 +347,12 @@ static int omap3_spi_probe(struct device_d *dev)
{
struct spi_master *master;
struct omap3_spi_master *omap3_master;
+ struct omap_spi_drvdata *devtype;
+ int ret;
+
+ ret = dev_get_drvdata(dev, (unsigned long *)&devtype);
+ if (ret)
+ return ret;
omap3_master = xzalloc(sizeof(*omap3_master));
@@ -374,7 +384,10 @@ static int omap3_spi_probe(struct device_d *dev)
master->setup = omap3_spi_setup;
master->transfer = omap3_spi_transfer;
- omap3_master->regs = dev_request_mem_region(dev, 0);
+ omap3_master->base = dev_request_mem_region(dev, 0);
+ omap3_master->regs = omap3_master->base;
+
+ omap3_master->regs += devtype->register_offset;
spi_reset(master);
@@ -383,8 +396,29 @@ static int omap3_spi_probe(struct device_d *dev)
return 0;
}
+static struct omap_spi_drvdata omap3_data = {
+ .register_offset = 0x0,
+};
+
+static struct omap_spi_drvdata omap4_data = {
+ .register_offset = 0x100,
+};
+
+static struct platform_device_id omap_spi_ids[] = {
+ {
+ .name = "omap3-spi",
+ .driver_data = (unsigned long)&omap3_data,
+ }, {
+ .name = "omap4-spi",
+ .driver_data = (unsigned long)&omap4_data,
+ }, {
+ /* sentinel */
+ },
+};
+
static struct driver_d omap3_spi_driver = {
- .name = "omap3_spi",
+ .name = "omap-spi",
.probe = omap3_spi_probe,
+ .id_table = omap_spi_ids,
};
device_platform_driver(omap3_spi_driver);
diff --git a/drivers/spi/omap3_spi.h b/drivers/spi/omap3_spi.h
index 55fd2fc..ce4a29b 100644
--- a/drivers/spi/omap3_spi.h
+++ b/drivers/spi/omap3_spi.h
@@ -88,7 +88,11 @@
struct omap3_spi_master {
struct spi_master master;
- void __iomem *regs;
+ void __iomem *base; /* base of address space */
+ void __iomem *regs; /* actual start of registers, omap4/am33xx have an
+ * offset of 0x100 between start of register space
+ * and registers
+ */
};
#endif /* _OMAP3_SPI_H_ */
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-11-22 14:49 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-22 14:48 Add devicetree support to OMAP drivers Sascha Hauer
2013-11-22 14:48 ` [PATCH 01/17] serial: ns16550: Add device ids for omap Sascha Hauer
2013-11-22 14:48 ` [PATCH 02/17] pinctrl: Add pinctrl-single driver Sascha Hauer
2013-11-22 14:48 ` Sascha Hauer [this message]
2013-11-22 14:48 ` [PATCH 04/17] spi: omap: Add devicetree probe support Sascha Hauer
2013-11-22 14:48 ` [PATCH 05/17] i2c: omap: Add devicetree support Sascha Hauer
2013-11-22 14:48 ` [PATCH 06/17] net: cpsw: inline slave_data Sascha Hauer
2013-11-22 14:48 ` [PATCH 07/17] cpsw: Add devicetree probe support Sascha Hauer
2013-11-22 14:48 ` [PATCH 08/17] net: cpsw: move eth_device into slave Sascha Hauer
2013-11-22 14:48 ` [PATCH 09/17] net: cpsw: drop for_each_slave Sascha Hauer
2013-11-22 14:48 ` [PATCH 10/17] net: cpsw: attach slave to edev->priv Sascha Hauer
2013-11-22 14:48 ` [PATCH 11/17] net: cpsw: straighten error path Sascha Hauer
2013-11-22 14:48 ` [PATCH 12/17] gpio: omap: move to drivers/gpio/ Sascha Hauer
2013-11-22 14:48 ` [PATCH 13/17] omap: gpmc: some refactoring Sascha Hauer
2013-11-22 14:48 ` [PATCH 14/17] gpio: omap: Add devicetree probe support Sascha Hauer
2013-11-22 14:48 ` [PATCH 15/17] mtd: omap gpmc: Use dev_add_param_enum Sascha Hauer
2013-11-22 14:49 ` [PATCH 16/17] bus: Add omap gpmc driver Sascha Hauer
2013-11-22 14:49 ` [PATCH 17/17] mmc: omap: Add devicetree support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1385131741-28280-4-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox