mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 05/17] i2c: omap: Add devicetree support
Date: Fri, 22 Nov 2013 15:48:49 +0100	[thread overview]
Message-ID: <1385131741-28280-6-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1385131741-28280-1-git-send-email-s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/i2c/busses/i2c-omap.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index c45af92..f7108c2 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -151,6 +151,7 @@ struct omap_i2c_struct {
 	u8			reg_shift;
 	struct omap_i2c_driver_data	*data;
 	struct resource		*ioarea;
+	u32			fclk_rate;
 	u32			speed;		/* Speed of bus in Khz */
 	u16			scheme;
 	u16			cmd_err;
@@ -271,6 +272,11 @@ static struct omap_i2c_driver_data am33xx_data = {
 	.fclk_rate =	48000,
 };
 
+static struct omap_i2c_driver_data omap4_of_data = {
+	.flags =	OMAP_I2C_FLAG_BUS_SHIFT_NONE,
+	.fclk_rate =	0,
+};
+
 static inline void omap_i2c_write_reg(struct omap_i2c_struct *i2c_omap,
 				      int reg, u16 val)
 {
@@ -415,7 +421,7 @@ static int omap_i2c_init(struct omap_i2c_struct *i2c_omap)
 		internal_clk = 4000;
 
 	/* Compute prescaler divisor */
-	psc = i2c_data->fclk_rate / internal_clk;
+	psc = i2c_omap->fclk_rate / internal_clk;
 	psc = psc - 1;
 
 	/* If configured for High Speed */
@@ -1074,6 +1080,12 @@ i2c_omap_probe(struct device_d *pdev)
 			i2c_omap->b_hw = 1; /* Enable hardware fixes */
 	}
 
+	i2c_omap->fclk_rate = i2c_data->fclk_rate;
+
+	if (!i2c_omap->fclk_rate)
+		of_property_read_u32(pdev->device_node, "clock-frequency",
+				&i2c_omap->fclk_rate);
+
 	/* reset ASAP, clearing any IRQs */
 	omap_i2c_init(i2c_omap);
 
@@ -1085,6 +1097,7 @@ i2c_omap_probe(struct device_d *pdev)
 	i2c_omap->adapter.master_xfer = omap_i2c_xfer,
 	i2c_omap->adapter.nr = pdev->id;
 	i2c_omap->adapter.dev.parent = pdev;
+	i2c_omap->adapter.dev.device_node = pdev->device_node;
 
 	/* i2c device drivers may be active on return from add_adapter() */
 	r = i2c_add_numbered_adapter(&i2c_omap->adapter);
@@ -1119,10 +1132,23 @@ static struct platform_device_id omap_i2c_ids[] = {
 	},
 };
 
+static __maybe_unused struct of_device_id omap_spi_dt_ids[] = {
+	{
+		.compatible = "ti,omap3-i2c",
+		.data = (unsigned long)&omap3_data,
+	}, {
+		.compatible = "ti,omap4-i2c",
+		.data = (unsigned long)&omap4_of_data,
+	}, {
+		/* sentinel */
+	}
+};
+
 static struct driver_d omap_i2c_driver = {
 	.probe		= i2c_omap_probe,
 	.name		= DRIVER_NAME,
 	.id_table	= omap_i2c_ids,
+	.of_compatible = DRV_OF_COMPAT(omap_spi_dt_ids),
 };
 device_platform_driver(omap_i2c_driver);
 
-- 
1.8.4.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2013-11-22 14:49 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-22 14:48 Add devicetree support to OMAP drivers Sascha Hauer
2013-11-22 14:48 ` [PATCH 01/17] serial: ns16550: Add device ids for omap Sascha Hauer
2013-11-22 14:48 ` [PATCH 02/17] pinctrl: Add pinctrl-single driver Sascha Hauer
2013-11-22 14:48 ` [PATCH 03/17] spi: omap: encode register offset into device_id Sascha Hauer
2013-11-22 14:48 ` [PATCH 04/17] spi: omap: Add devicetree probe support Sascha Hauer
2013-11-22 14:48 ` Sascha Hauer [this message]
2013-11-22 14:48 ` [PATCH 06/17] net: cpsw: inline slave_data Sascha Hauer
2013-11-22 14:48 ` [PATCH 07/17] cpsw: Add devicetree probe support Sascha Hauer
2013-11-22 14:48 ` [PATCH 08/17] net: cpsw: move eth_device into slave Sascha Hauer
2013-11-22 14:48 ` [PATCH 09/17] net: cpsw: drop for_each_slave Sascha Hauer
2013-11-22 14:48 ` [PATCH 10/17] net: cpsw: attach slave to edev->priv Sascha Hauer
2013-11-22 14:48 ` [PATCH 11/17] net: cpsw: straighten error path Sascha Hauer
2013-11-22 14:48 ` [PATCH 12/17] gpio: omap: move to drivers/gpio/ Sascha Hauer
2013-11-22 14:48 ` [PATCH 13/17] omap: gpmc: some refactoring Sascha Hauer
2013-11-22 14:48 ` [PATCH 14/17] gpio: omap: Add devicetree probe support Sascha Hauer
2013-11-22 14:48 ` [PATCH 15/17] mtd: omap gpmc: Use dev_add_param_enum Sascha Hauer
2013-11-22 14:49 ` [PATCH 16/17] bus: Add omap gpmc driver Sascha Hauer
2013-11-22 14:49 ` [PATCH 17/17] mmc: omap: Add devicetree support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1385131741-28280-6-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox